Char/Misc and other driver subsystem changes for 6.3-rc1
Here is the large set of driver changes for char/misc drivers and other
smaller driver subsystems that flow through this git tree.
Included in here are:
- New IIO drivers and features and improvments in that subsystem
- New hwtracing drivers and additions to that subsystem
- lots of interconnect changes and new drivers as that subsystem seems
under very active development recently. This required also merging
in the icc subsystem changes through this tree.
- FPGA driver updates
- counter subsystem and driver updates
- MHI driver updates
- nvmem driver updates
- documentation updates
- Other smaller driver updates and fixes, full details in the shortlog
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/inQw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yksvwCeOvU//SPwrbIpaeHAmHUv0PSVOrwAoKmt4ICh
hQUudlztfkvUJxKIH0gh
=Sjk4
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the large set of driver changes for char/misc drivers and
other smaller driver subsystems that flow through this git tree.
Included in here are:
- New IIO drivers and features and improvments in that subsystem
- New hwtracing drivers and additions to that subsystem
- lots of interconnect changes and new drivers as that subsystem
seems under very active development recently. This required also
merging in the icc subsystem changes through this tree.
- FPGA driver updates
- counter subsystem and driver updates
- MHI driver updates
- nvmem driver updates
- documentation updates
- Other smaller driver updates and fixes, full details in the
shortlog
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (223 commits)
scripts/tags.sh: fix incompatibility with PCRE2
firmware: coreboot: Remove GOOGLE_COREBOOT_TABLE_ACPI/OF Kconfig entries
mei: lower the log level for non-fatal failed messages
mei: bus: disallow driver match while dismantling device
misc: vmw_balloon: fix memory leak with using debugfs_lookup()
nvmem: stm32: fix OPTEE dependency
dt-bindings: nvmem: qfprom: add IPQ8074 compatible
nvmem: qcom-spmi-sdam: register at device init time
nvmem: rave-sp-eeprm: fix kernel-doc bad line warning
nvmem: stm32: detect bsec pta presence for STM32MP15x
nvmem: stm32: add OP-TEE support for STM32MP13x
nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of()
nvmem: core: add nvmem_add_one_cell()
nvmem: core: drop the removal of the cells in nvmem_add_cells()
nvmem: core: move struct nvmem_cell_info to nvmem-provider.h
nvmem: core: add an index parameter to the cell
of: property: add #nvmem-cell-cells property
of: property: make #.*-cells optional for simple props
of: base: add of_parse_phandle_with_optional_args()
net: add helper eth_addr_add()
...
This commit is contained in:
Linus Torvalds
commit
693fed981e
|
|
@ -236,7 +236,7 @@ What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/traceid
|
|||
Date: November 2014
|
||||
KernelVersion: 3.19
|
||||
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
|
||||
Description: (RW) Holds the trace ID that will appear in the trace stream
|
||||
Description: (RO) Holds the trace ID that will appear in the trace stream
|
||||
coming from this trace entity.
|
||||
|
||||
What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/trigger_event
|
||||
|
|
|
|||
|
|
@ -0,0 +1,13 @@
|
|||
What: /sys/bus/coresight/devices/<tpdm-name>/integration_test
|
||||
Date: January 2023
|
||||
KernelVersion 6.2
|
||||
Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
|
||||
Description:
|
||||
(Write) Run integration test for tpdm. Integration test
|
||||
will generate test data for tpdm. It can help to make
|
||||
sure that the trace path is enabled and the link configurations
|
||||
are fine.
|
||||
|
||||
Accepts only one of the 2 values - 1 or 2.
|
||||
1 : Generate 64 bits data
|
||||
2 : Generate 32 bits data
|
||||
|
|
@ -0,0 +1,31 @@
|
|||
What: /sys/bus/coresight/devices/ultra_smb<N>/enable_sink
|
||||
Date: January 2023
|
||||
KernelVersion: 6.3
|
||||
Contact: Junhao He <hejunhao3@huawei.com>
|
||||
Description: (RW) Add/remove a SMB device from a trace path. There can be
|
||||
multiple sources for a single SMB device.
|
||||
|
||||
What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_size
|
||||
Date: January 2023
|
||||
KernelVersion: 6.3
|
||||
Contact: Junhao He <hejunhao3@huawei.com>
|
||||
Description: (RO) Shows the buffer size of each UltraSoc SMB device.
|
||||
|
||||
What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_status
|
||||
Date: January 2023
|
||||
KernelVersion: 6.3
|
||||
Contact: Junhao He <hejunhao3@huawei.com>
|
||||
Description: (RO) Shows the value of UltraSoc SMB status register.
|
||||
BIT(0) is zero means buffer is empty.
|
||||
|
||||
What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/read_pos
|
||||
Date: January 2023
|
||||
KernelVersion: 6.3
|
||||
Contact: Junhao He <hejunhao3@huawei.com>
|
||||
Description: (RO) Shows the value of UltraSoc SMB Read Pointer register.
|
||||
|
||||
What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/write_pos
|
||||
Date: January 2023
|
||||
KernelVersion: 6.3
|
||||
Contact: Junhao He <hejunhao3@huawei.com>
|
||||
Description: (RO) Shows the value of UltraSoc SMB Write Pointer register.
|
||||
|
|
@ -19,6 +19,24 @@ Contact: linux-accelerators@lists.ozlabs.org
|
|||
Description: Available instances left of the device
|
||||
Return -ENODEV if uacce_ops get_available_instances is not provided
|
||||
|
||||
What: /sys/class/uacce/<dev_name>/isolate_strategy
|
||||
Date: Nov 2022
|
||||
KernelVersion: 6.1
|
||||
Contact: linux-accelerators@lists.ozlabs.org
|
||||
Description: (RW) A sysfs node that configure the error threshold for the hardware
|
||||
isolation strategy. This size is a configured integer value, which is the
|
||||
number of threshold for hardware errors occurred in one hour. The default is 0.
|
||||
0 means never isolate the device. The maximum value is 65535. You can write
|
||||
a number of threshold based on your hardware.
|
||||
|
||||
What: /sys/class/uacce/<dev_name>/isolate
|
||||
Date: Nov 2022
|
||||
KernelVersion: 6.1
|
||||
Contact: linux-accelerators@lists.ozlabs.org
|
||||
Description: (R) A sysfs node that read the device isolated state. The value 1
|
||||
means the device is unavailable. The 0 means the device is
|
||||
available.
|
||||
|
||||
What: /sys/class/uacce/<dev_name>/algorithms
|
||||
Date: Feb 2020
|
||||
KernelVersion: 5.7
|
||||
|
|
|
|||
|
|
@ -0,0 +1,16 @@
|
|||
What: /sys/devices/platform/amba_pl/<dev>/errcnt
|
||||
Date: Nov 2022
|
||||
Contact: appana.durga.kedareswara.rao@amd.com
|
||||
Description: This control file provides the fault detection count.
|
||||
This file cannot be written.
|
||||
Example:
|
||||
# cat /sys/devices/platform/amba_pl/44a10000.tmr_manager/errcnt
|
||||
1
|
||||
|
||||
What: /sys/devices/platform/amba_pl/<dev>/dis_block_break
|
||||
Date: Nov 2022
|
||||
Contact: appana.durga.kedareswara.rao@amd.com
|
||||
Description: Write any value to it, This control file enables the break signal.
|
||||
This file is write only.
|
||||
Example:
|
||||
# echo <any value> > /sys/devices/platform/amba_pl/44a10000.tmr_manager/dis_block_break
|
||||
|
|
@ -0,0 +1,129 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
|
||||
# Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/arm/qcom,coresight-tpda.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Trace, Profiling and Diagnostics Aggregator - TPDA
|
||||
|
||||
description: |
|
||||
TPDAs are responsible for packetization and timestamping of data sets
|
||||
utilizing the MIPI STPv2 packet protocol. Pulling data sets from one or
|
||||
more attached TPDM and pushing the resultant (packetized) data out a
|
||||
master ATB interface. Performing an arbitrated ATB interleaving (funneling)
|
||||
task for free-flowing data from TPDM (i.e. CMB and DSB data set flows).
|
||||
|
||||
There is no strict binding between TPDM and TPDA. TPDA can have multiple
|
||||
TPDMs connect to it. But There must be only one TPDA in the path from the
|
||||
TPDM source to TMC sink. TPDM can directly connect to TPDA's inport or
|
||||
connect to funnel which will connect to TPDA's inport.
|
||||
|
||||
We can use the commands are similar to the below to validate TPDMs.
|
||||
Enable coresight sink first.
|
||||
|
||||
echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink
|
||||
echo 1 > /sys/bus/coresight/devices/tpdm0/enable_source
|
||||
echo 1 > /sys/bus/coresight/devices/tpdm0/integration_test
|
||||
echo 2 > /sys/bus/coresight/devices/tpdm0/integration_test
|
||||
|
||||
The test data will be collected in the coresight sink which is enabled.
|
||||
If rwp register of the sink is keeping updating when do integration_test
|
||||
(by cat tmc_etf0/mgmt/rwp), it means there is data generated from TPDM
|
||||
to sink.
|
||||
|
||||
maintainers:
|
||||
- Mao Jinlong <quic_jinlmao@quicinc.com>
|
||||
- Tao Zhang <quic_taozha@quicinc.com>
|
||||
|
||||
# Need a custom select here or 'arm,primecell' will match on lots of nodes
|
||||
select:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- qcom,coresight-tpda
|
||||
required:
|
||||
- compatible
|
||||
|
||||
properties:
|
||||
$nodename:
|
||||
pattern: "^tpda(@[0-9a-f]+)$"
|
||||
compatible:
|
||||
items:
|
||||
- const: qcom,coresight-tpda
|
||||
- const: arm,primecell
|
||||
|
||||
reg:
|
||||
minItems: 1
|
||||
maxItems: 2
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
clock-names:
|
||||
items:
|
||||
- const: apb_pclk
|
||||
|
||||
in-ports:
|
||||
type: object
|
||||
description: |
|
||||
Input connections from TPDM to TPDA
|
||||
$ref: /schemas/graph.yaml#/properties/ports
|
||||
|
||||
out-ports:
|
||||
type: object
|
||||
description: |
|
||||
Output connections from the TPDA to legacy CoreSight trace bus.
|
||||
$ref: /schemas/graph.yaml#/properties/ports
|
||||
|
||||
properties:
|
||||
port:
|
||||
description:
|
||||
Output connection from the TPDA to legacy CoreSight Trace bus.
|
||||
$ref: /schemas/graph.yaml#/properties/port
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- clocks
|
||||
- clock-names
|
||||
- in-ports
|
||||
- out-ports
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
# minimum tpda definition.
|
||||
- |
|
||||
tpda@6004000 {
|
||||
compatible = "qcom,coresight-tpda", "arm,primecell";
|
||||
reg = <0x6004000 0x1000>;
|
||||
|
||||
clocks = <&aoss_qmp>;
|
||||
clock-names = "apb_pclk";
|
||||
|
||||
in-ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
tpda_qdss_0_in_tpdm_dcc: endpoint {
|
||||
remote-endpoint =
|
||||
<&tpdm_dcc_out_tpda_qdss_0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
out-ports {
|
||||
port {
|
||||
tpda_qdss_out_funnel_in0: endpoint {
|
||||
remote-endpoint =
|
||||
<&funnel_in0_in_tpda_qdss>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
...
|
||||
|
|
@ -0,0 +1,93 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
|
||||
# Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/arm/qcom,coresight-tpdm.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Trace, Profiling and Diagnostics Monitor - TPDM
|
||||
|
||||
description: |
|
||||
The TPDM or Monitor serves as data collection component for various dataset
|
||||
types specified in the QPMDA spec. It covers Implementation defined ((ImplDef),
|
||||
Basic Counts (BC), Tenure Counts (TC), Continuous Multi-Bit (CMB), and Discrete
|
||||
Single Bit (DSB). It performs data collection in the data producing clock
|
||||
domain and transfers it to the data collection time domain, generally ATB
|
||||
clock domain.
|
||||
|
||||
The primary use case of the TPDM is to collect data from different data
|
||||
sources and send it to a TPDA for packetization, timestamping, and funneling.
|
||||
|
||||
maintainers:
|
||||
- Mao Jinlong <quic_jinlmao@quicinc.com>
|
||||
- Tao Zhang <quic_taozha@quicinc.com>
|
||||
|
||||
# Need a custom select here or 'arm,primecell' will match on lots of nodes
|
||||
select:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- qcom,coresight-tpdm
|
||||
required:
|
||||
- compatible
|
||||
|
||||
properties:
|
||||
$nodename:
|
||||
pattern: "^tpdm(@[0-9a-f]+)$"
|
||||
compatible:
|
||||
items:
|
||||
- const: qcom,coresight-tpdm
|
||||
- const: arm,primecell
|
||||
|
||||
reg:
|
||||
minItems: 1
|
||||
maxItems: 2
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
clock-names:
|
||||
items:
|
||||
- const: apb_pclk
|
||||
|
||||
out-ports:
|
||||
description: |
|
||||
Output connections from the TPDM to coresight funnel/TPDA.
|
||||
$ref: /schemas/graph.yaml#/properties/ports
|
||||
|
||||
properties:
|
||||
port:
|
||||
description: Output connection from the TPDM to coresight
|
||||
funnel/TPDA.
|
||||
$ref: /schemas/graph.yaml#/properties/port
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- clocks
|
||||
- clock-names
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
# minimum TPDM definition. TPDM connect to coresight TPDA.
|
||||
- |
|
||||
tpdm@684c000 {
|
||||
compatible = "qcom,coresight-tpdm", "arm,primecell";
|
||||
reg = <0x0684c000 0x1000>;
|
||||
|
||||
clocks = <&aoss_qmp>;
|
||||
clock-names = "apb_pclk";
|
||||
|
||||
out-ports {
|
||||
port {
|
||||
tpdm_prng_out_tpda_qdss: endpoint {
|
||||
remote-endpoint =
|
||||
<&tpda_qdss_in_tpdm_prng>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
...
|
||||
|
|
@ -41,7 +41,7 @@ unevaluatedProperties: false
|
|||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
spi0 {
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
|
|||
|
|
@ -39,7 +39,7 @@ examples:
|
|||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
spi0 {
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
|
|||
|
|
@ -59,7 +59,7 @@ examples:
|
|||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
i2c0 {
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
|
|||
|
|
@ -49,7 +49,7 @@ examples:
|
|||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
i2c0 {
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -64,7 +64,7 @@ examples:
|
|||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
spi0 {
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
|
|||
|
|
@ -58,34 +58,34 @@ unevaluatedProperties: false
|
|||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
/* Example for a I2C device node */
|
||||
accelerometer@1d {
|
||||
compatible = "adi,adxl355";
|
||||
reg = <0x1d>;
|
||||
interrupt-parent = <&gpio>;
|
||||
interrupts = <25 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "DRDY";
|
||||
};
|
||||
/* Example for a I2C device node */
|
||||
accelerometer@1d {
|
||||
compatible = "adi,adxl355";
|
||||
reg = <0x1d>;
|
||||
interrupt-parent = <&gpio>;
|
||||
interrupts = <25 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "DRDY";
|
||||
};
|
||||
};
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
accelerometer@0 {
|
||||
compatible = "adi,adxl355";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <1000000>;
|
||||
interrupt-parent = <&gpio>;
|
||||
interrupts = <25 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "DRDY";
|
||||
};
|
||||
accelerometer@0 {
|
||||
compatible = "adi,adxl355";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <1000000>;
|
||||
interrupt-parent = <&gpio>;
|
||||
interrupts = <25 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "DRDY";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -37,32 +37,32 @@ unevaluatedProperties: false
|
|||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
i2c0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
/* Example for a I2C device node */
|
||||
accelerometer@53 {
|
||||
compatible = "adi,adxl372";
|
||||
reg = <0x53>;
|
||||
interrupt-parent = <&gpio>;
|
||||
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
|
||||
};
|
||||
/* Example for a I2C device node */
|
||||
accelerometer@53 {
|
||||
compatible = "adi,adxl372";
|
||||
reg = <0x53>;
|
||||
interrupt-parent = <&gpio>;
|
||||
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
|
||||
};
|
||||
};
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
spi0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
accelerometer@0 {
|
||||
compatible = "adi,adxl372";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <1000000>;
|
||||
interrupt-parent = <&gpio>;
|
||||
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
|
||||
};
|
||||
accelerometer@0 {
|
||||
compatible = "adi,adxl372";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <1000000>;
|
||||
interrupt-parent = <&gpio>;
|
||||
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -36,7 +36,7 @@ unevaluatedProperties: false
|
|||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
spi0 {
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
|
|||
|
|
@ -44,7 +44,7 @@ examples:
|
|||
|
||||
accel@f {
|
||||
compatible = "kionix,kxtf9";
|
||||
reg = <0x0F>;
|
||||
reg = <0xf>;
|
||||
mount-matrix = "0", "1", "0",
|
||||
"1", "0", "0",
|
||||
"0", "0", "1";
|
||||
|
|
|
|||
|
|
@ -1,9 +1,8 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/iio/accel/memsensing,msa311.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/iio/accel/memsensing,msa311.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: MEMSensing digital 3-Axis accelerometer
|
||||
|
||||
|
|
|
|||
|
|
@ -50,7 +50,7 @@ unevaluatedProperties: false
|
|||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
i2c0 {
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -65,7 +65,7 @@ examples:
|
|||
};
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
spi0 {
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
|
|||
|
|
@ -44,11 +44,11 @@ examples:
|
|||
#size-cells = <0>;
|
||||
|
||||
adc@2f {
|
||||
compatible = "adi,ad7091r5";
|
||||
reg = <0x2f>;
|
||||
compatible = "adi,ad7091r5";
|
||||
reg = <0x2f>;
|
||||
|
||||
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-parent = <&gpio>;
|
||||
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-parent = <&gpio>;
|
||||
};
|
||||
};
|
||||
...
|
||||
|
|
|
|||
|
|
@ -61,7 +61,7 @@ required:
|
|||
|
||||
patternProperties:
|
||||
"^channel@([0-9]|1[0-5])$":
|
||||
$ref: "adc.yaml"
|
||||
$ref: adc.yaml
|
||||
type: object
|
||||
description: |
|
||||
Represents the external channels which are connected to the ADC.
|
||||
|
|
|
|||
|
|
@ -99,26 +99,26 @@ unevaluatedProperties: false
|
|||
|
||||
examples:
|
||||
- |
|
||||
spi0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
adc@0 {
|
||||
compatible = "adi,ad7192";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <1000000>;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
clocks = <&ad7192_mclk>;
|
||||
clock-names = "mclk";
|
||||
interrupts = <25 0x2>;
|
||||
interrupt-parent = <&gpio>;
|
||||
dvdd-supply = <&dvdd>;
|
||||
avdd-supply = <&avdd>;
|
||||
adc@0 {
|
||||
compatible = "adi,ad7192";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <1000000>;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
clocks = <&ad7192_mclk>;
|
||||
clock-names = "mclk";
|
||||
interrupts = <25 0x2>;
|
||||
interrupt-parent = <&gpio>;
|
||||
dvdd-supply = <&dvdd>;
|
||||
avdd-supply = <&avdd>;
|
||||
|
||||
adi,refin2-pins-enable;
|
||||
adi,rejection-60-Hz-enable;
|
||||
adi,buffer-enable;
|
||||
adi,burnout-currents-enable;
|
||||
adi,refin2-pins-enable;
|
||||
adi,rejection-60-Hz-enable;
|
||||
adi,buffer-enable;
|
||||
adi,burnout-currents-enable;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -43,7 +43,7 @@ required:
|
|||
|
||||
patternProperties:
|
||||
"^channel@[0-7]$":
|
||||
$ref: "adc.yaml"
|
||||
$ref: adc.yaml
|
||||
type: object
|
||||
description: |
|
||||
Represents the external channels which are connected to the ADC.
|
||||
|
|
|
|||
|
|
@ -112,30 +112,30 @@ examples:
|
|||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
spi0 {
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
adc@0 {
|
||||
compatible = "adi,ad7606-8";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <1000000>;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
compatible = "adi,ad7606-8";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <1000000>;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
|
||||
avcc-supply = <&adc_vref>;
|
||||
avcc-supply = <&adc_vref>;
|
||||
|
||||
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-parent = <&gpio>;
|
||||
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-parent = <&gpio>;
|
||||
|
||||
adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
|
||||
reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
|
||||
adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
|
||||
adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>,
|
||||
<&gpio 23 GPIO_ACTIVE_HIGH>,
|
||||
<&gpio 26 GPIO_ACTIVE_HIGH>;
|
||||
standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
|
||||
adi,sw-mode;
|
||||
adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
|
||||
reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
|
||||
adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
|
||||
adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>,
|
||||
<&gpio 23 GPIO_ACTIVE_HIGH>,
|
||||
<&gpio 26 GPIO_ACTIVE_HIGH>;
|
||||
standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
|
||||
adi,sw-mode;
|
||||
};
|
||||
};
|
||||
...
|
||||
|
|
|
|||
|
|
@ -72,7 +72,7 @@ additionalProperties: false
|
|||
examples:
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
spi0 {
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
|
|||
|
|
@ -57,17 +57,17 @@ additionalProperties: false
|
|||
examples:
|
||||
- |
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
adc1: adc@28 {
|
||||
reg = <0x28>;
|
||||
compatible = "adi,ad7991";
|
||||
interrupts = <13 2>;
|
||||
interrupt-parent = <&gpio6>;
|
||||
adc1: adc@28 {
|
||||
reg = <0x28>;
|
||||
compatible = "adi,ad7991";
|
||||
interrupts = <13 2>;
|
||||
interrupt-parent = <&gpio6>;
|
||||
|
||||
vcc-supply = <&vcc_3v3>;
|
||||
vref-supply = <&adc_vref>;
|
||||
vcc-supply = <&vcc_3v3>;
|
||||
vref-supply = <&adc_vref>;
|
||||
};
|
||||
};
|
||||
...
|
||||
|
|
|
|||
|
|
@ -64,10 +64,10 @@ examples:
|
|||
#size-cells = <0>;
|
||||
|
||||
adc@0 {
|
||||
compatible = "adi,ad9467";
|
||||
reg = <0>;
|
||||
clocks = <&adc_clk>;
|
||||
clock-names = "adc-clk";
|
||||
compatible = "adi,ad9467";
|
||||
reg = <0>;
|
||||
clocks = <&adc_clk>;
|
||||
clock-names = "adc-clk";
|
||||
};
|
||||
};
|
||||
...
|
||||
|
|
|
|||
|
|
@ -51,11 +51,11 @@ additionalProperties: false
|
|||
examples:
|
||||
- |
|
||||
axi-adc@44a00000 {
|
||||
compatible = "adi,axi-adc-10.0.a";
|
||||
reg = <0x44a00000 0x10000>;
|
||||
dmas = <&rx_dma 0>;
|
||||
dma-names = "rx";
|
||||
compatible = "adi,axi-adc-10.0.a";
|
||||
reg = <0x44a00000 0x10000>;
|
||||
dmas = <&rx_dma 0>;
|
||||
dma-names = "rx";
|
||||
|
||||
adi,adc-dev = <&spi_adc>;
|
||||
adi,adc-dev = <&spi_adc>;
|
||||
};
|
||||
...
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@ properties:
|
|||
description: Startup time expressed in ms, it depends on SoC.
|
||||
|
||||
atmel,trigger-edge-type:
|
||||
$ref: '/schemas/types.yaml#/definitions/uint32'
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description:
|
||||
One of possible edge types for the ADTRG hardware trigger pin.
|
||||
When the specific edge type is detected, the conversion will
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/iio/adc/avia-hx711.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/iio/adc/avia-hx711.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: AVIA HX711 ADC chip for weight cells
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,47 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/iio/adc/cirrus,ep9301-adc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Cirrus Logic EP930x internal ADC
|
||||
|
||||
description: |
|
||||
Cirrus Logic EP9301/EP9302 SoCs' internal ADC block.
|
||||
|
||||
User's manual:
|
||||
https://cdn.embeddedts.com/resource-attachments/ts-7000_ep9301-ug.pdf
|
||||
|
||||
maintainers:
|
||||
- Alexander Sverdlin <alexander.sverdlin@gmail.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: cirrus,ep9301-adc
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- clocks
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
adc: adc@80900000 {
|
||||
compatible = "cirrus,ep9301-adc";
|
||||
reg = <0x80900000 0x28>;
|
||||
clocks = <&syscon 24>;
|
||||
interrupt-parent = <&vic1>;
|
||||
interrupts = <30>;
|
||||
};
|
||||
...
|
||||
|
|
@ -2,8 +2,8 @@
|
|||
# Copyright 2019-2020 Artur Rojek
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/iio/adc/ingenic,adc.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/iio/adc/ingenic,adc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Ingenic JZ47xx ADC controller IIO
|
||||
|
||||
|
|
@ -78,14 +78,14 @@ examples:
|
|||
#include <dt-bindings/iio/adc/ingenic,adc.h>
|
||||
|
||||
adc@10070000 {
|
||||
compatible = "ingenic,jz4740-adc";
|
||||
#io-channel-cells = <1>;
|
||||
compatible = "ingenic,jz4740-adc";
|
||||
#io-channel-cells = <1>;
|
||||
|
||||
reg = <0x10070000 0x30>;
|
||||
reg = <0x10070000 0x30>;
|
||||
|
||||
clocks = <&cgu JZ4740_CLK_ADC>;
|
||||
clock-names = "adc";
|
||||
clocks = <&cgu JZ4740_CLK_ADC>;
|
||||
clock-names = "adc";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <18>;
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <18>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -54,8 +54,8 @@ examples:
|
|||
- |
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
maxadc: adc@0 {
|
||||
compatible = "maxim,max1027";
|
||||
reg = <0>;
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@ maintainers:
|
|||
- Jonathan Cameron <jic23@kernel.org>
|
||||
|
||||
description: |
|
||||
Family of simple ADCs with i2c inteface and internal references.
|
||||
Family of simple ADCs with i2c interface and internal references.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
|
|
|
|||
|
|
@ -54,8 +54,8 @@ examples:
|
|||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
adc@0 {
|
||||
compatible = "maxim,max1241";
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@ maintainers:
|
|||
- Jonathan Cameron <jic23@kernel.org>
|
||||
|
||||
description: |
|
||||
Family of ADCs with i2c inteface, internal references and threshold
|
||||
Family of ADCs with i2c interface, internal references and threshold
|
||||
monitoring.
|
||||
|
||||
properties:
|
||||
|
|
|
|||
|
|
@ -2,8 +2,8 @@
|
|||
# Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com>
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/iio/adc/microchip,mcp3911.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/iio/adc/microchip,mcp3911.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Microchip MCP3911 Dual channel analog front end (ADC)
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,81 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/iio/adc/nxp,imx93-adc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: NXP iMX93 ADC
|
||||
|
||||
maintainers:
|
||||
- Haibo Chen <haibo.chen@nxp.com>
|
||||
|
||||
description:
|
||||
The ADC on iMX93 is a 8-channel 12-bit 1MS/s ADC with 4 channels
|
||||
connected to pins. it support normal and inject mode, include
|
||||
One-Shot and Scan (continuous) conversions. Programmable DMA
|
||||
enables for each channel Also this ADC contain alternate analog
|
||||
watchdog thresholds, select threshold through input ports. And
|
||||
also has Self-test logic and Software-initiated calibration.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: nxp,imx93-adc
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
items:
|
||||
- description: WDGnL, watchdog threshold interrupt requests.
|
||||
- description: WDGnH, watchdog threshold interrupt requests.
|
||||
- description: normal conversion, include EOC (End of Conversion),
|
||||
ECH (End of Chain), JEOC (End of Injected Conversion) and
|
||||
JECH (End of injected Chain).
|
||||
- description: Self-testing Interrupts.
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
clock-names:
|
||||
const: ipg
|
||||
|
||||
vref-supply:
|
||||
description:
|
||||
The reference voltage which used to establish channel scaling.
|
||||
|
||||
"#io-channel-cells":
|
||||
const: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- clocks
|
||||
- clock-names
|
||||
- vref-supply
|
||||
- "#io-channel-cells"
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/clock/imx93-clock.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
adc@44530000 {
|
||||
compatible = "nxp,imx93-adc";
|
||||
reg = <0x44530000 0x10000>;
|
||||
interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clk IMX93_CLK_ADC1_GATE>;
|
||||
clock-names = "ipg";
|
||||
vref-supply = <®_vref_1v8>;
|
||||
#io-channel-cells = <1>;
|
||||
};
|
||||
};
|
||||
...
|
||||
|
|
@ -160,7 +160,7 @@ examples:
|
|||
};
|
||||
ref_muxoff: adc-channel@f {
|
||||
reg = <0x00 0x0f>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
...
|
||||
|
|
|
|||
|
|
@ -20,6 +20,7 @@ properties:
|
|||
compatible:
|
||||
items:
|
||||
- enum:
|
||||
- qcom,pm8226-iadc
|
||||
- qcom,pm8941-iadc
|
||||
- const: qcom,spmi-iadc
|
||||
|
||||
|
|
@ -49,7 +50,7 @@ additionalProperties: false
|
|||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
spmi_bus {
|
||||
spmi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pmic_iadc: adc@3600 {
|
||||
|
|
|
|||
|
|
@ -40,12 +40,12 @@ additionalProperties: false
|
|||
examples:
|
||||
- |
|
||||
pmic {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pmic_rradc: adc@4500 {
|
||||
compatible = "qcom,pmi8998-rradc";
|
||||
reg = <0x4500>;
|
||||
#io-channel-cells = <1>;
|
||||
};
|
||||
pmic_rradc: adc@4500 {
|
||||
compatible = "qcom,pmi8998-rradc";
|
||||
reg = <0x4500>;
|
||||
#io-channel-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -69,7 +69,7 @@ required:
|
|||
|
||||
patternProperties:
|
||||
"^channel@[0-7]$":
|
||||
$ref: "adc.yaml"
|
||||
$ref: adc.yaml
|
||||
type: object
|
||||
description: |
|
||||
Represents the external channels which are connected to the ADC.
|
||||
|
|
|
|||
|
|
@ -52,7 +52,7 @@ properties:
|
|||
vdd-supply: true
|
||||
|
||||
samsung,syscon-phandle:
|
||||
$ref: '/schemas/types.yaml#/definitions/phandle'
|
||||
$ref: /schemas/types.yaml#/definitions/phandle
|
||||
description:
|
||||
Phandle to the PMU system controller node (to access the ADC_PHY
|
||||
register on Exynos3250/4x12/5250/5420/5800).
|
||||
|
|
@ -142,7 +142,7 @@ examples:
|
|||
pullup-ohm = <47000>;
|
||||
pulldown-ohm = <0>;
|
||||
io-channels = <&adc 4>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
- |
|
||||
|
|
@ -150,7 +150,7 @@ examples:
|
|||
|
||||
adc@126c0000 {
|
||||
compatible = "samsung,exynos3250-adc";
|
||||
reg = <0x126C0000 0x100>;
|
||||
reg = <0x126c0000 0x100>;
|
||||
interrupts = <0 137 0>;
|
||||
#io-channel-cells = <1>;
|
||||
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: STMicroelectronics STM32 ADC
|
||||
|
||||
|
|
@ -80,7 +80,7 @@ properties:
|
|||
description:
|
||||
Phandle to system configuration controller. It can be used to control the
|
||||
analog circuitry on stm32mp1.
|
||||
$ref: "/schemas/types.yaml#/definitions/phandle-array"
|
||||
$ref: /schemas/types.yaml#/definitions/phandle-array
|
||||
|
||||
interrupt-controller: true
|
||||
|
||||
|
|
@ -341,7 +341,7 @@ patternProperties:
|
|||
patternProperties:
|
||||
"^channel@([0-9]|1[0-9])$":
|
||||
type: object
|
||||
$ref: "adc.yaml"
|
||||
$ref: adc.yaml
|
||||
description: Represents the external channels which are connected to the ADC.
|
||||
|
||||
properties:
|
||||
|
|
|
|||
|
|
@ -35,10 +35,8 @@ additionalProperties: false
|
|||
|
||||
examples:
|
||||
- |
|
||||
stmpe {
|
||||
stmpe_adc {
|
||||
compatible = "st,stmpe-adc";
|
||||
st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */
|
||||
};
|
||||
adc {
|
||||
compatible = "st,stmpe-adc";
|
||||
st,norequest-mask = <0x0f>; /* dont use ADC CH3-0 */
|
||||
};
|
||||
...
|
||||
|
|
|
|||
|
|
@ -0,0 +1,55 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/iio/adc/ti,adc081c.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: TI Single-channel I2C ADCs
|
||||
|
||||
maintainers:
|
||||
- Jonathan Cameron <jic23@kernel.org>
|
||||
- Lars-Peter Clausen <lars@metafoo.de>
|
||||
|
||||
description: |
|
||||
Single-channel ADC supporting 8, 10, or 12-bit samples and high/low alerts.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- ti,adc081c
|
||||
- ti,adc101c
|
||||
- ti,adc121c
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
vref-supply:
|
||||
description:
|
||||
Regulator for the combined power supply and voltage reference
|
||||
|
||||
"#io-channel-cells":
|
||||
const: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- vref-supply
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
adc@52 {
|
||||
compatible = "ti,adc081c";
|
||||
reg = <0x52>;
|
||||
vref-supply = <®_2p5v>;
|
||||
};
|
||||
};
|
||||
...
|
||||
|
|
@ -104,12 +104,12 @@ examples:
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
channel@0 {
|
||||
reg = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
channel@4 {
|
||||
reg = <4>;
|
||||
ti,gain = <3>;
|
||||
ti,datarate = <5>;
|
||||
reg = <4>;
|
||||
ti,gain = <3>;
|
||||
ti,datarate = <5>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -77,7 +77,7 @@ required:
|
|||
|
||||
patternProperties:
|
||||
"^channel@([0-7])$":
|
||||
$ref: "adc.yaml"
|
||||
$ref: adc.yaml
|
||||
type: object
|
||||
description: |
|
||||
Represents the external channels which are connected to the ADC.
|
||||
|
|
|
|||
|
|
@ -0,0 +1,110 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/iio/adc/ti,ads7924.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: TI ADS7924 4 channels 12 bits I2C analog to digital converter
|
||||
|
||||
maintainers:
|
||||
- Hugo Villeneuve <hvilleneuve@dimonoff.com>
|
||||
|
||||
description: |
|
||||
Texas Instruments ADS7924 4 channels 12 bits I2C analog to digital converter
|
||||
|
||||
Specifications:
|
||||
https://www.ti.com/lit/gpn/ads7924
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: ti,ads7924
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
vref-supply:
|
||||
description:
|
||||
The regulator supply for the ADC reference voltage (AVDD)
|
||||
|
||||
reset-gpios:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
"#address-cells":
|
||||
const: 1
|
||||
|
||||
"#size-cells":
|
||||
const: 0
|
||||
|
||||
"#io-channel-cells":
|
||||
const: 1
|
||||
|
||||
patternProperties:
|
||||
"^channel@[0-3]+$":
|
||||
$ref: adc.yaml
|
||||
|
||||
description: |
|
||||
Represents the external channels which are connected to the ADC.
|
||||
|
||||
properties:
|
||||
reg:
|
||||
description: |
|
||||
The channel number. It can have up to 4 channels numbered from 0 to 3.
|
||||
items:
|
||||
- minimum: 0
|
||||
maximum: 3
|
||||
|
||||
label: true
|
||||
|
||||
required:
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- vref-supply
|
||||
- "#address-cells"
|
||||
- "#size-cells"
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
adc@48 {
|
||||
compatible = "ti,ads7924";
|
||||
reg = <0x48>;
|
||||
vref-supply = <&ads7924_reg>;
|
||||
reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
|
||||
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-parent = <&gpio>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
channel@0 {
|
||||
reg = <0>;
|
||||
label = "CH0";
|
||||
};
|
||||
channel@1 {
|
||||
reg = <1>;
|
||||
label = "CH1";
|
||||
};
|
||||
channel@2 {
|
||||
reg = <2>;
|
||||
label = "CH2";
|
||||
};
|
||||
channel@3 {
|
||||
reg = <3>;
|
||||
label = "CH3";
|
||||
};
|
||||
};
|
||||
};
|
||||
...
|
||||
|
|
@ -0,0 +1,70 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/iio/adc/ti,lmp92064.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Texas Instruments LMP92064 Precision Current and Voltage Sensor.
|
||||
|
||||
maintainers:
|
||||
- Leonard Göhrs <l.goehrs@pengutronix.de>
|
||||
|
||||
description: |
|
||||
The LMP92064 is a two channel ADC intended for combined voltage and current
|
||||
measurements.
|
||||
|
||||
The device contains two ADCs to allow simultaneous sampling of voltage and
|
||||
current and thus of instantaneous power consumption.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- ti,lmp92064
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
vdd-supply:
|
||||
description: Regulator that provides power to the main part of the chip
|
||||
|
||||
vdig-supply:
|
||||
description: |
|
||||
Regulator that provides power to the digital I/O part of the chip
|
||||
|
||||
shunt-resistor-micro-ohms:
|
||||
description: |
|
||||
Value of the shunt resistor (in µΩ) connected between INCP and INCN,
|
||||
across which current is measured. Used to provide correct scaling of the
|
||||
raw ADC measurement.
|
||||
|
||||
reset-gpios:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- shunt-resistor-micro-ohms
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/spi/spi-peripheral-props.yaml#
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
adc@0 {
|
||||
compatible = "ti,lmp92064";
|
||||
reg = <0>;
|
||||
vdd-supply = <&vdd>;
|
||||
vdig-supply = <&vdd>;
|
||||
spi-max-frequency = <20000000>;
|
||||
shunt-resistor-micro-ohms = <15000>;
|
||||
reset-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
...
|
||||
|
|
@ -41,7 +41,7 @@ required:
|
|||
|
||||
patternProperties:
|
||||
"^channel@[0-7]$":
|
||||
$ref: "adc.yaml"
|
||||
$ref: adc.yaml
|
||||
type: object
|
||||
|
||||
properties:
|
||||
|
|
@ -83,36 +83,36 @@ examples:
|
|||
#size-cells = <0>;
|
||||
|
||||
channel@0 {
|
||||
reg = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
channel@1 {
|
||||
reg = <1>;
|
||||
settling-time-us = <700>;
|
||||
oversampling-ratio = <5>;
|
||||
reg = <1>;
|
||||
settling-time-us = <700>;
|
||||
oversampling-ratio = <5>;
|
||||
};
|
||||
channel@2 {
|
||||
reg = <2>;
|
||||
reg = <2>;
|
||||
};
|
||||
channel@3 {
|
||||
reg = <3>;
|
||||
settling-time-us = <700>;
|
||||
oversampling-ratio = <5>;
|
||||
reg = <3>;
|
||||
settling-time-us = <700>;
|
||||
oversampling-ratio = <5>;
|
||||
};
|
||||
channel@4 {
|
||||
reg = <4>;
|
||||
settling-time-us = <700>;
|
||||
oversampling-ratio = <5>;
|
||||
reg = <4>;
|
||||
settling-time-us = <700>;
|
||||
oversampling-ratio = <5>;
|
||||
};
|
||||
channel@5 {
|
||||
reg = <5>;
|
||||
settling-time-us = <700>;
|
||||
oversampling-ratio = <5>;
|
||||
reg = <5>;
|
||||
settling-time-us = <700>;
|
||||
oversampling-ratio = <5>;
|
||||
};
|
||||
channel@6 {
|
||||
reg = <6>;
|
||||
reg = <6>;
|
||||
};
|
||||
channel@7 {
|
||||
reg = <7>;
|
||||
reg = <7>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -192,26 +192,26 @@ additionalProperties: false
|
|||
examples:
|
||||
- |
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
ad3552r@0 {
|
||||
compatible = "adi,ad3552r";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <20000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
channel@0 {
|
||||
reg = <0>;
|
||||
adi,output-range-microvolt = <0 10000000>;
|
||||
};
|
||||
channel@1 {
|
||||
reg = <1>;
|
||||
custom-output-range-config {
|
||||
adi,gain-offset = <5>;
|
||||
adi,gain-scaling-p-inv-log2 = <1>;
|
||||
adi,gain-scaling-n-inv-log2 = <2>;
|
||||
adi,rfb-ohms = <1>;
|
||||
};
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
ad3552r@0 {
|
||||
compatible = "adi,ad3552r";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <20000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
channel@0 {
|
||||
reg = <0>;
|
||||
adi,output-range-microvolt = <0 10000000>;
|
||||
};
|
||||
channel@1 {
|
||||
reg = <1>;
|
||||
custom-output-range-config {
|
||||
adi,gain-offset = <5>;
|
||||
adi,gain-scaling-p-inv-log2 = <1>;
|
||||
adi,gain-scaling-n-inv-log2 = <2>;
|
||||
adi,rfb-ohms = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@ maintainers:
|
|||
|
||||
description: |
|
||||
DAC devices supporting both SPI and I2C interfaces.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
|
|
|
|||
|
|
@ -33,6 +33,7 @@ properties:
|
|||
- description: I2C devices
|
||||
enum:
|
||||
- adi,ad5311r
|
||||
- adi,ad5337r
|
||||
- adi,ad5338r
|
||||
- adi,ad5671r
|
||||
- adi,ad5675r
|
||||
|
|
|
|||
|
|
@ -51,15 +51,15 @@ additionalProperties: false
|
|||
examples:
|
||||
- |
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ad5766@0 {
|
||||
compatible = "adi,ad5766";
|
||||
output-range-microvolts = <(-5000000) 5000000>;
|
||||
reg = <0>;
|
||||
spi-cpol;
|
||||
spi-max-frequency = <1000000>;
|
||||
reset-gpios = <&gpio 22 0>;
|
||||
};
|
||||
};
|
||||
ad5766@0 {
|
||||
compatible = "adi,ad5766";
|
||||
output-range-microvolts = <(-5000000) 5000000>;
|
||||
reg = <0>;
|
||||
spi-cpol;
|
||||
spi-max-frequency = <1000000>;
|
||||
reset-gpios = <&gpio 22 0>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -147,49 +147,49 @@ unevaluatedProperties: false
|
|||
|
||||
examples:
|
||||
- |
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ad5770r@0 {
|
||||
compatible = "adi,ad5770r";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <1000000>;
|
||||
vref-supply = <&vref>;
|
||||
adi,external-resistor;
|
||||
reset-gpios = <&gpio 22 0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
ad5770r@0 {
|
||||
compatible = "adi,ad5770r";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <1000000>;
|
||||
vref-supply = <&vref>;
|
||||
adi,external-resistor;
|
||||
reset-gpios = <&gpio 22 0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
channel@0 {
|
||||
reg = <0>;
|
||||
adi,range-microamp = <0 300000>;
|
||||
};
|
||||
channel@0 {
|
||||
reg = <0>;
|
||||
adi,range-microamp = <0 300000>;
|
||||
};
|
||||
|
||||
channel@1 {
|
||||
reg = <1>;
|
||||
adi,range-microamp = <0 140000>;
|
||||
};
|
||||
channel@1 {
|
||||
reg = <1>;
|
||||
adi,range-microamp = <0 140000>;
|
||||
};
|
||||
|
||||
channel@2 {
|
||||
reg = <2>;
|
||||
adi,range-microamp = <0 55000>;
|
||||
};
|
||||
channel@2 {
|
||||
reg = <2>;
|
||||
adi,range-microamp = <0 55000>;
|
||||
};
|
||||
|
||||
channel@3 {
|
||||
reg = <3>;
|
||||
adi,range-microamp = <0 45000>;
|
||||
};
|
||||
channel@3 {
|
||||
reg = <3>;
|
||||
adi,range-microamp = <0 45000>;
|
||||
};
|
||||
|
||||
channel@4 {
|
||||
reg = <4>;
|
||||
adi,range-microamp = <0 45000>;
|
||||
};
|
||||
channel@4 {
|
||||
reg = <4>;
|
||||
adi,range-microamp = <0 45000>;
|
||||
};
|
||||
|
||||
channel@5 {
|
||||
reg = <5>;
|
||||
adi,range-microamp = <0 45000>;
|
||||
};
|
||||
};
|
||||
channel@5 {
|
||||
reg = <5>;
|
||||
adi,range-microamp = <0 45000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
...
|
||||
|
|
|
|||
|
|
@ -116,32 +116,32 @@ examples:
|
|||
- |
|
||||
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
ltc2688: ltc2688@0 {
|
||||
compatible = "adi,ltc2688";
|
||||
reg = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
ltc2688: ltc2688@0 {
|
||||
compatible = "adi,ltc2688";
|
||||
reg = <0>;
|
||||
|
||||
vcc-supply = <&vcc>;
|
||||
iovcc-supply = <&vcc>;
|
||||
vref-supply = <&vref>;
|
||||
vcc-supply = <&vcc>;
|
||||
iovcc-supply = <&vcc>;
|
||||
vref-supply = <&vref>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
channel@0 {
|
||||
reg = <0>;
|
||||
adi,toggle-mode;
|
||||
adi,overrange;
|
||||
};
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
channel@0 {
|
||||
reg = <0>;
|
||||
adi,toggle-mode;
|
||||
adi,overrange;
|
||||
};
|
||||
|
||||
channel@1 {
|
||||
reg = <1>;
|
||||
adi,output-range-microvolt = <0 10000000>;
|
||||
channel@1 {
|
||||
reg = <1>;
|
||||
adi,output-range-microvolt = <0 10000000>;
|
||||
|
||||
clocks = <&clock_tgp3>;
|
||||
adi,toggle-dither-input = <2>;
|
||||
};
|
||||
};
|
||||
clocks = <&clock_tgp3>;
|
||||
adi,toggle-dither-input = <2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
...
|
||||
|
|
|
|||
|
|
@ -2,8 +2,8 @@
|
|||
# Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com>
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/iio/dac/lltc,ltc1660.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/iio/dac/lltc,ltc1660.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Linear Technology Micropower octal 8-Bit and 10-Bit DACs
|
||||
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/iio/dac/lltc,ltc2632.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/iio/dac/lltc,ltc2632.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Linear Technology LTC263x 12-/10-/8-Bit Rail-to-Rail DAC
|
||||
|
||||
|
|
@ -64,14 +64,14 @@ examples:
|
|||
};
|
||||
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
dac@0 {
|
||||
compatible = "lltc,ltc2632-l12";
|
||||
reg = <0>; /* CS0 */
|
||||
spi-max-frequency = <1000000>;
|
||||
vref-supply = <&vref>;
|
||||
};
|
||||
dac@0 {
|
||||
compatible = "lltc,ltc2632-l12";
|
||||
reg = <0>; /* CS0 */
|
||||
spi-max-frequency = <1000000>;
|
||||
vref-supply = <&vref>;
|
||||
};
|
||||
};
|
||||
...
|
||||
|
|
|
|||
|
|
@ -0,0 +1,49 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/iio/dac/maxim,max5522.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Maxim Integrated MAX5522 Dual 10-bit Voltage-Output SPI DACs
|
||||
|
||||
maintainers:
|
||||
- Angelo Dureghello <angelo.dureghello@timesys.com>
|
||||
- Jonathan Cameron <jic23@kernel.org>
|
||||
|
||||
description: |
|
||||
Datasheet available at:
|
||||
https://www.analog.com/en/products/max5522.html
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: maxim,max5522
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
vdd-supply: true
|
||||
vrefin-supply: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- vrefin-supply
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/spi/spi-peripheral-props.yaml#
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
dac@0 {
|
||||
compatible = "maxim,max5522";
|
||||
reg = <0>;
|
||||
vrefin-supply = <&vref>;
|
||||
};
|
||||
};
|
||||
...
|
||||
|
|
@ -1,8 +1,8 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/iio/dac/st,stm32-dac.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/iio/dac/st,stm32-dac.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: STMicroelectronics STM32 DAC
|
||||
|
||||
|
|
|
|||
|
|
@ -46,7 +46,7 @@ examples:
|
|||
|
||||
dac@4c {
|
||||
compatible = "ti,dac5571";
|
||||
reg = <0x4C>;
|
||||
reg = <0x4c>;
|
||||
vref-supply = <&vdd_supply>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -53,16 +53,16 @@ unevaluatedProperties: false
|
|||
|
||||
examples:
|
||||
- |
|
||||
spi0 {
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
frequency@0 {
|
||||
compatible = "adi,adf4371";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <1000000>;
|
||||
clocks = <&adf4371_clkin>;
|
||||
clock-names = "clkin";
|
||||
compatible = "adi,adf4371";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <1000000>;
|
||||
clocks = <&adf4371_clkin>;
|
||||
clock-names = "clkin";
|
||||
};
|
||||
};
|
||||
...
|
||||
|
|
|
|||
|
|
@ -50,13 +50,13 @@ examples:
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gyro@0 {
|
||||
compatible = "adi,adxrs290";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <5000000>;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
interrupt-parent = <&gpio>;
|
||||
interrupts = <25 IRQ_TYPE_EDGE_RISING>;
|
||||
compatible = "adi,adxrs290";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <5000000>;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
interrupt-parent = <&gpio>;
|
||||
interrupts = <25 IRQ_TYPE_EDGE_RISING>;
|
||||
};
|
||||
};
|
||||
...
|
||||
|
|
|
|||
|
|
@ -65,34 +65,34 @@ examples:
|
|||
- |
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
i2c0 {
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
gyroscope@20 {
|
||||
compatible = "nxp,fxas21002c";
|
||||
reg = <0x20>;
|
||||
compatible = "nxp,fxas21002c";
|
||||
reg = <0x20>;
|
||||
|
||||
vdd-supply = <®_peri_3p15v>;
|
||||
vddio-supply = <®_peri_3p15v>;
|
||||
vdd-supply = <®_peri_3p15v>;
|
||||
vddio-supply = <®_peri_3p15v>;
|
||||
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <7 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "INT1";
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <7 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "INT1";
|
||||
};
|
||||
};
|
||||
spi0 {
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
gyroscope@0 {
|
||||
compatible = "nxp,fxas21002c";
|
||||
reg = <0x0>;
|
||||
compatible = "nxp,fxas21002c";
|
||||
reg = <0x0>;
|
||||
|
||||
spi-max-frequency = <2000000>;
|
||||
spi-max-frequency = <2000000>;
|
||||
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <7 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "INT2";
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <7 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "INT2";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -42,7 +42,7 @@ examples:
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
heart_mon@0 {
|
||||
heart-mon@0 {
|
||||
compatible = "ti,afe4403";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
|
|
|
|||
|
|
@ -39,7 +39,7 @@ examples:
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
heart_mon@58 {
|
||||
heart-mon@58 {
|
||||
compatible = "ti,afe4404";
|
||||
reg = <0x58>;
|
||||
tx-supply = <&vbat>;
|
||||
|
|
|
|||
|
|
@ -34,7 +34,7 @@ additionalProperties: false
|
|||
|
||||
examples:
|
||||
- |
|
||||
humidity_sensor {
|
||||
humidity-sensor {
|
||||
compatible = "dht11";
|
||||
gpios = <&gpio0 6 0>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -35,12 +35,12 @@ additionalProperties: false
|
|||
|
||||
examples:
|
||||
- |
|
||||
i2c0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
humidity@40 {
|
||||
compatible = "ti,hdc2010";
|
||||
reg = <0x40>;
|
||||
};
|
||||
humidity@40 {
|
||||
compatible = "ti,hdc2010";
|
||||
reg = <0x40>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -42,7 +42,7 @@ examples:
|
|||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
spi0 {
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
|
|||
|
|
@ -114,17 +114,17 @@ examples:
|
|||
- |
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
adis16475: adis16475-3@0 {
|
||||
compatible = "adi,adis16475-3";
|
||||
reg = <0>;
|
||||
spi-cpha;
|
||||
spi-cpol;
|
||||
spi-max-frequency = <2000000>;
|
||||
interrupts = <4 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-parent = <&gpio>;
|
||||
};
|
||||
adis16475: adis16475-3@0 {
|
||||
compatible = "adi,adis16475-3";
|
||||
reg = <0>;
|
||||
spi-cpha;
|
||||
spi-cpol;
|
||||
spi-max-frequency = <2000000>;
|
||||
interrupts = <4 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-parent = <&gpio>;
|
||||
};
|
||||
};
|
||||
...
|
||||
|
|
|
|||
|
|
@ -64,16 +64,16 @@ examples:
|
|||
#size-cells = <0>;
|
||||
|
||||
bmi160@68 {
|
||||
compatible = "bosch,bmi160";
|
||||
reg = <0x68>;
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
vddio-supply = <&pm8916_l6>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <12 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "INT1";
|
||||
mount-matrix = "0", "1", "0",
|
||||
"-1", "0", "0",
|
||||
"0", "0", "1";
|
||||
compatible = "bosch,bmi160";
|
||||
reg = <0x68>;
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
vddio-supply = <&pm8916_l6>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <12 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "INT1";
|
||||
mount-matrix = "0", "1", "0",
|
||||
"-1", "0", "0",
|
||||
"0", "0", "1";
|
||||
};
|
||||
};
|
||||
- |
|
||||
|
|
@ -84,11 +84,11 @@ examples:
|
|||
#size-cells = <0>;
|
||||
|
||||
bmi160@0 {
|
||||
compatible = "bosch,bmi160";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <12 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "INT2";
|
||||
compatible = "bosch,bmi160";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <12 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "INT2";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -65,35 +65,35 @@ examples:
|
|||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
i2c0 {
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
icm42605@68 {
|
||||
compatible = "invensense,icm42605";
|
||||
reg = <0x68>;
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
|
||||
vdd-supply = <&vdd>;
|
||||
vddio-supply = <&vddio>;
|
||||
compatible = "invensense,icm42605";
|
||||
reg = <0x68>;
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
|
||||
vdd-supply = <&vdd>;
|
||||
vddio-supply = <&vddio>;
|
||||
};
|
||||
};
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
spi0 {
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
icm42602@0 {
|
||||
compatible = "invensense,icm42602";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <24000000>;
|
||||
spi-cpha;
|
||||
spi-cpol;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
|
||||
vdd-supply = <&vdd>;
|
||||
vddio-supply = <&vddio>;
|
||||
compatible = "invensense,icm42602";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <24000000>;
|
||||
spi-cpha;
|
||||
spi-cpol;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
|
||||
vdd-supply = <&vdd>;
|
||||
vddio-supply = <&vddio>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -49,33 +49,33 @@ examples:
|
|||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
i2c0 {
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
fxos8700@1e {
|
||||
compatible = "nxp,fxos8700";
|
||||
reg = <0x1e>;
|
||||
compatible = "nxp,fxos8700";
|
||||
reg = <0x1e>;
|
||||
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <7 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "INT1";
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <7 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "INT1";
|
||||
};
|
||||
};
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
spi0 {
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
fxos8700@0 {
|
||||
compatible = "nxp,fxos8700";
|
||||
reg = <0>;
|
||||
compatible = "nxp,fxos8700";
|
||||
reg = <0>;
|
||||
|
||||
spi-max-frequency = <1000000>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <7 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "INT2";
|
||||
spi-max-frequency = <1000000>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <7 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "INT2";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -63,7 +63,7 @@ properties:
|
|||
description: if defined provides VDD IO power to the sensor.
|
||||
|
||||
st,drdy-int-pin:
|
||||
$ref: '/schemas/types.yaml#/definitions/uint32'
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: |
|
||||
The pin on the package that will be used to signal data ready
|
||||
enum:
|
||||
|
|
|
|||
|
|
@ -0,0 +1,75 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/iio/magnetometer/ti,tmag5273.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor
|
||||
|
||||
maintainers:
|
||||
- Gerald Loacker <gerald.loacker@wolfvision.net>
|
||||
|
||||
description:
|
||||
The TI TMAG5273 is a low-power linear 3D Hall-effect sensor. This device
|
||||
integrates three independent Hall-effect sensors in the X, Y, and Z axes.
|
||||
The device has an integrated temperature sensor available. The TMAG5273
|
||||
can be configured through the I2C interface to enable any combination of
|
||||
magnetic axes and temperature measurements. An integrated angle calculation
|
||||
engine (CORDIC) provides full 360° angular position information for both
|
||||
on-axis and off-axis angle measurement topologies. The angle calculation is
|
||||
performed using two user-selected magnetic axes.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: ti,tmag5273
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
"#io-channel-cells":
|
||||
const: 1
|
||||
|
||||
ti,angle-measurement:
|
||||
$ref: /schemas/types.yaml#/definitions/string
|
||||
description:
|
||||
Enables angle measurement in the selected plane.
|
||||
If not specified, "x-y" will be anables as default.
|
||||
enum:
|
||||
- off
|
||||
- x-y
|
||||
- y-z
|
||||
- x-z
|
||||
|
||||
vcc-supply:
|
||||
description:
|
||||
A regulator providing 1.7 V to 3.6 V supply voltage on the VCC pin,
|
||||
typically 3.3 V.
|
||||
|
||||
interrupts:
|
||||
description:
|
||||
The low active interrupt can be configured to be fixed width or latched.
|
||||
Interrupt events can be configured to be generated from magnetic
|
||||
thresholds or when a conversion is completed.
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
magnetometer@35 {
|
||||
compatible = "ti,tmag5273";
|
||||
reg = <0x35>;
|
||||
#io-channel-cells = <1>;
|
||||
ti,angle-measurement = "x-z";
|
||||
vcc-supply = <&vcc3v3>;
|
||||
};
|
||||
};
|
||||
...
|
||||
|
|
@ -91,12 +91,12 @@ examples:
|
|||
#size-cells = <0>;
|
||||
|
||||
magnetometer@2e {
|
||||
compatible = "yamaha,yas530";
|
||||
reg = <0x2e>;
|
||||
vdd-supply = <&ldo1_reg>;
|
||||
iovdd-supply = <&ldo2_reg>;
|
||||
reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
|
||||
interrupts = <13 IRQ_TYPE_EDGE_RISING>;
|
||||
compatible = "yamaha,yas530";
|
||||
reg = <0x2e>;
|
||||
vdd-supply = <&ldo1_reg>;
|
||||
iovdd-supply = <&ldo2_reg>;
|
||||
reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
|
||||
interrupts = <13 IRQ_TYPE_EDGE_RISING>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -105,8 +105,8 @@ examples:
|
|||
#size-cells = <0>;
|
||||
|
||||
magnetometer@2e {
|
||||
compatible = "yamaha,yas539";
|
||||
reg = <0x2e>;
|
||||
vdd-supply = <&ldo1_reg>;
|
||||
compatible = "yamaha,yas539";
|
||||
reg = <0x2e>;
|
||||
vdd-supply = <&ldo1_reg>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -44,7 +44,7 @@ examples:
|
|||
|
||||
potentiometer@2f {
|
||||
compatible = "adi,ad5272-020";
|
||||
reg = <0x2F>;
|
||||
reg = <0x2f>;
|
||||
reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -39,7 +39,7 @@ examples:
|
|||
- |
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
i2c0 {
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
|
|||
|
|
@ -60,16 +60,16 @@ examples:
|
|||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
i2c0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pressure@77 {
|
||||
compatible = "bosch,bmp085";
|
||||
reg = <0x77>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <25 IRQ_TYPE_EDGE_RISING>;
|
||||
reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
|
||||
vddd-supply = <&foo>;
|
||||
vdda-supply = <&bar>;
|
||||
};
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pressure@77 {
|
||||
compatible = "bosch,bmp085";
|
||||
reg = <0x77>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <25 IRQ_TYPE_EDGE_RISING>;
|
||||
reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
|
||||
vddd-supply = <&foo>;
|
||||
vdda-supply = <&bar>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -60,7 +60,7 @@ examples:
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
lightning@0 {
|
||||
lightning@0 {
|
||||
compatible = "ams,as3935";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <400000>;
|
||||
|
|
|
|||
|
|
@ -1,7 +1,6 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
|
||||
$id: http://devicetree.org/schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
|
|
|
|||
|
|
@ -36,7 +36,7 @@ properties:
|
|||
const: 1
|
||||
|
||||
semtech,resolution:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [8, 16, 32, 64, 128, 256, 512, 1024]
|
||||
description:
|
||||
Capacitance measurement resolution. For both phases, "reference" and
|
||||
|
|
|
|||
|
|
@ -39,6 +39,7 @@ properties:
|
|||
- st,lis3lv02dl-accel
|
||||
- st,lng2dm-accel
|
||||
- st,lsm303agr-accel
|
||||
- st,lsm303c-accel
|
||||
- st,lsm303dl-accel
|
||||
- st,lsm303dlh-accel
|
||||
- st,lsm303dlhc-accel
|
||||
|
|
@ -66,6 +67,7 @@ properties:
|
|||
- st,lis2mdl
|
||||
- st,lis3mdl-magn
|
||||
- st,lsm303agr-magn
|
||||
- st,lsm303c-magn
|
||||
- st,lsm303dlh-magn
|
||||
- st,lsm303dlhc-magn
|
||||
- st,lsm303dlm-magn
|
||||
|
|
|
|||
|
|
@ -472,75 +472,74 @@ examples:
|
|||
#size-cells = <0>;
|
||||
|
||||
temperature-sensor@0 {
|
||||
compatible = "adi,ltc2983";
|
||||
reg = <0>;
|
||||
compatible = "adi,ltc2983";
|
||||
reg = <0>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
interrupts = <20 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-parent = <&gpio>;
|
||||
interrupts = <20 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-parent = <&gpio>;
|
||||
|
||||
thermocouple@18 {
|
||||
reg = <18>;
|
||||
adi,sensor-type = <8>; //Type B
|
||||
adi,sensor-oc-current-microamp = <10>;
|
||||
adi,cold-junction-handle = <&diode5>;
|
||||
};
|
||||
thermocouple@18 {
|
||||
reg = <18>;
|
||||
adi,sensor-type = <8>; //Type B
|
||||
adi,sensor-oc-current-microamp = <10>;
|
||||
adi,cold-junction-handle = <&diode5>;
|
||||
};
|
||||
|
||||
diode5: diode@5 {
|
||||
reg = <5>;
|
||||
adi,sensor-type = <28>;
|
||||
};
|
||||
diode5: diode@5 {
|
||||
reg = <5>;
|
||||
adi,sensor-type = <28>;
|
||||
};
|
||||
|
||||
rsense2: rsense@2 {
|
||||
reg = <2>;
|
||||
adi,sensor-type = <29>;
|
||||
adi,rsense-val-milli-ohms = <1200000>; //1.2Kohms
|
||||
};
|
||||
rsense2: rsense@2 {
|
||||
reg = <2>;
|
||||
adi,sensor-type = <29>;
|
||||
adi,rsense-val-milli-ohms = <1200000>; //1.2Kohms
|
||||
};
|
||||
|
||||
rtd@14 {
|
||||
reg = <14>;
|
||||
adi,sensor-type = <15>; //PT1000
|
||||
/*2-wire, internal gnd, no current rotation*/
|
||||
adi,number-of-wires = <2>;
|
||||
adi,rsense-share;
|
||||
adi,excitation-current-microamp = <500>;
|
||||
adi,rsense-handle = <&rsense2>;
|
||||
};
|
||||
rtd@14 {
|
||||
reg = <14>;
|
||||
adi,sensor-type = <15>; //PT1000
|
||||
/*2-wire, internal gnd, no current rotation*/
|
||||
adi,number-of-wires = <2>;
|
||||
adi,rsense-share;
|
||||
adi,excitation-current-microamp = <500>;
|
||||
adi,rsense-handle = <&rsense2>;
|
||||
};
|
||||
|
||||
adc@10 {
|
||||
reg = <10>;
|
||||
adi,sensor-type = <30>;
|
||||
adi,single-ended;
|
||||
};
|
||||
adc@10 {
|
||||
reg = <10>;
|
||||
adi,sensor-type = <30>;
|
||||
adi,single-ended;
|
||||
};
|
||||
|
||||
thermistor@12 {
|
||||
reg = <12>;
|
||||
adi,sensor-type = <26>; //Steinhart
|
||||
adi,rsense-handle = <&rsense2>;
|
||||
adi,custom-steinhart = <0x00F371EC 0x12345678
|
||||
0x2C0F8733 0x10018C66 0xA0FEACCD
|
||||
0x90021D99>; //6 entries
|
||||
};
|
||||
|
||||
thermocouple@20 {
|
||||
reg = <20>;
|
||||
adi,sensor-type = <9>; //custom thermocouple
|
||||
adi,single-ended;
|
||||
adi,custom-thermocouple =
|
||||
/bits/ 64 <(-50220000) 0>,
|
||||
/bits/ 64 <(-30200000) 99100000>,
|
||||
/bits/ 64 <(-5300000) 135400000>,
|
||||
/bits/ 64 <0 273150000>,
|
||||
/bits/ 64 <40200000 361200000>,
|
||||
/bits/ 64 <55300000 522100000>,
|
||||
/bits/ 64 <88300000 720300000>,
|
||||
/bits/ 64 <132200000 811200000>,
|
||||
/bits/ 64 <188700000 922500000>,
|
||||
/bits/ 64 <460400000 1000000000>; //10 pairs
|
||||
};
|
||||
thermistor@12 {
|
||||
reg = <12>;
|
||||
adi,sensor-type = <26>; //Steinhart
|
||||
adi,rsense-handle = <&rsense2>;
|
||||
adi,custom-steinhart = <0x00f371ec 0x12345678
|
||||
0x2c0f8733 0x10018c66 0xa0feaccd
|
||||
0x90021d99>; //6 entries
|
||||
};
|
||||
|
||||
thermocouple@20 {
|
||||
reg = <20>;
|
||||
adi,sensor-type = <9>; //custom thermocouple
|
||||
adi,single-ended;
|
||||
adi,custom-thermocouple =
|
||||
/bits/ 64 <(-50220000) 0>,
|
||||
/bits/ 64 <(-30200000) 99100000>,
|
||||
/bits/ 64 <(-5300000) 135400000>,
|
||||
/bits/ 64 <0 273150000>,
|
||||
/bits/ 64 <40200000 361200000>,
|
||||
/bits/ 64 <55300000 522100000>,
|
||||
/bits/ 64 <88300000 720300000>,
|
||||
/bits/ 64 <132200000 811200000>,
|
||||
/bits/ 64 <188700000 922500000>,
|
||||
/bits/ 64 <460400000 1000000000>; //10 pairs
|
||||
};
|
||||
};
|
||||
};
|
||||
...
|
||||
|
|
|
|||
|
|
@ -43,12 +43,12 @@ examples:
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
temp_sensor@0 {
|
||||
compatible = "maxim,max31865";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <400000>;
|
||||
spi-cpha;
|
||||
maxim,3-wire;
|
||||
temperature-sensor@0 {
|
||||
compatible = "maxim,max31865";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <400000>;
|
||||
spi-cpha;
|
||||
maxim,3-wire;
|
||||
};
|
||||
};
|
||||
...
|
||||
|
|
|
|||
|
|
@ -1,10 +1,10 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/iio/temperature/ti,tmp117.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/iio/temperature/ti,tmp117.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: "TI TMP117 - Digital temperature sensor with integrated NV memory"
|
||||
title: TI TMP117 - Digital temperature sensor with integrated NV memory
|
||||
|
||||
description: |
|
||||
TI TMP117 - Digital temperature sensor with integrated NV memory that supports
|
||||
|
|
|
|||
|
|
@ -27,11 +27,13 @@ properties:
|
|||
- qcom,sc7280-cpu-bwmon
|
||||
- qcom,sc8280xp-cpu-bwmon
|
||||
- qcom,sdm845-bwmon
|
||||
- qcom,sm8550-cpu-bwmon
|
||||
- const: qcom,msm8998-bwmon
|
||||
- const: qcom,msm8998-bwmon # BWMON v4
|
||||
- items:
|
||||
- enum:
|
||||
- qcom,sc8280xp-llcc-bwmon
|
||||
- qcom,sm8550-llcc-bwmon
|
||||
- const: qcom,sc7280-llcc-bwmon
|
||||
- const: qcom,sc7280-llcc-bwmon # BWMON v5
|
||||
- const: qcom,sdm845-llcc-bwmon # BWMON v5
|
||||
|
|
|
|||
|
|
@ -22,6 +22,7 @@ properties:
|
|||
- qcom,sc7180-osm-l3
|
||||
- qcom,sc8180x-osm-l3
|
||||
- qcom,sdm845-osm-l3
|
||||
- qcom,sm6350-osm-l3
|
||||
- qcom,sm8150-osm-l3
|
||||
- const: qcom,osm-l3
|
||||
- items:
|
||||
|
|
|
|||
|
|
@ -62,6 +62,37 @@ properties:
|
|||
power-domains:
|
||||
maxItems: 1
|
||||
|
||||
# Child node's properties
|
||||
patternProperties:
|
||||
'^interconnect-[a-z0-9]+$':
|
||||
type: object
|
||||
description:
|
||||
snoc-mm is a child of snoc, sharing snoc's register address space.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- qcom,msm8939-snoc-mm
|
||||
|
||||
'#interconnect-cells':
|
||||
const: 1
|
||||
|
||||
clock-names:
|
||||
items:
|
||||
- const: bus
|
||||
- const: bus_a
|
||||
|
||||
clocks:
|
||||
items:
|
||||
- description: Bus Clock
|
||||
- description: Bus A Clock
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- '#interconnect-cells'
|
||||
- clock-names
|
||||
- clocks
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
|
@ -108,37 +139,6 @@ allOf:
|
|||
- description: Bus Clock
|
||||
- description: Bus A Clock
|
||||
|
||||
# Child node's properties
|
||||
patternProperties:
|
||||
'^interconnect-[a-z0-9]+$':
|
||||
type: object
|
||||
description:
|
||||
snoc-mm is a child of snoc, sharing snoc's register address space.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- qcom,msm8939-snoc-mm
|
||||
|
||||
'#interconnect-cells':
|
||||
const: 1
|
||||
|
||||
clock-names:
|
||||
items:
|
||||
- const: bus
|
||||
- const: bus_a
|
||||
|
||||
clocks:
|
||||
items:
|
||||
- description: Bus Clock
|
||||
- description: Bus A Clock
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- '#interconnect-cells'
|
||||
- clock-names
|
||||
- clocks
|
||||
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
|
|
@ -237,6 +237,17 @@ allOf:
|
|||
- description: Aggregate2 USB3 AXI Clock.
|
||||
- description: Config NoC USB2 AXI Clock.
|
||||
|
||||
- if:
|
||||
not:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- qcom,msm8939-snoc
|
||||
then:
|
||||
patternProperties:
|
||||
'^interconnect-[a-z0-9]+$': false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/qcom,rpmcc.h>
|
||||
|
|
|
|||
|
|
@ -39,18 +39,6 @@ properties:
|
|||
- qcom,sc7180-npu-noc
|
||||
- qcom,sc7180-qup-virt
|
||||
- qcom,sc7180-system-noc
|
||||
- qcom,sc7280-aggre1-noc
|
||||
- qcom,sc7280-aggre2-noc
|
||||
- qcom,sc7280-clk-virt
|
||||
- qcom,sc7280-cnoc2
|
||||
- qcom,sc7280-cnoc3
|
||||
- qcom,sc7280-dc-noc
|
||||
- qcom,sc7280-gem-noc
|
||||
- qcom,sc7280-lpass-ag-noc
|
||||
- qcom,sc7280-mc-virt
|
||||
- qcom,sc7280-mmss-noc
|
||||
- qcom,sc7280-nsp-noc
|
||||
- qcom,sc7280-system-noc
|
||||
- qcom,sc8180x-aggre1-noc
|
||||
- qcom,sc8180x-aggre2-noc
|
||||
- qcom,sc8180x-camnoc-virt
|
||||
|
|
@ -58,23 +46,18 @@ properties:
|
|||
- qcom,sc8180x-config-noc
|
||||
- qcom,sc8180x-dc-noc
|
||||
- qcom,sc8180x-gem-noc
|
||||
- qcom,sc8180x-ipa-virt
|
||||
- qcom,sc8180x-mc-virt
|
||||
- qcom,sc8180x-mmss-noc
|
||||
- qcom,sc8180x-qup-virt
|
||||
- qcom,sc8180x-system-noc
|
||||
- qcom,sc8280xp-aggre1-noc
|
||||
- qcom,sc8280xp-aggre2-noc
|
||||
- qcom,sc8280xp-clk-virt
|
||||
- qcom,sc8280xp-config-noc
|
||||
- qcom,sc8280xp-dc-noc
|
||||
- qcom,sc8280xp-gem-noc
|
||||
- qcom,sc8280xp-lpass-ag-noc
|
||||
- qcom,sc8280xp-mc-virt
|
||||
- qcom,sc8280xp-mmss-noc
|
||||
- qcom,sc8280xp-nspa-noc
|
||||
- qcom,sc8280xp-nspb-noc
|
||||
- qcom,sc8280xp-system-noc
|
||||
- qcom,sdm670-aggre1-noc
|
||||
- qcom,sdm670-aggre2-noc
|
||||
- qcom,sdm670-config-noc
|
||||
- qcom,sdm670-dc-noc
|
||||
- qcom,sdm670-gladiator-noc
|
||||
- qcom,sdm670-mem-noc
|
||||
- qcom,sdm670-mmss-noc
|
||||
- qcom,sdm670-system-noc
|
||||
- qcom,sdm845-aggre1-noc
|
||||
- qcom,sdm845-aggre2-noc
|
||||
- qcom,sdm845-config-noc
|
||||
|
|
@ -96,7 +79,6 @@ properties:
|
|||
- qcom,sm8150-config-noc
|
||||
- qcom,sm8150-dc-noc
|
||||
- qcom,sm8150-gem-noc
|
||||
- qcom,sm8150-ipa-virt
|
||||
- qcom,sm8150-mc-virt
|
||||
- qcom,sm8150-mmss-noc
|
||||
- qcom,sm8150-system-noc
|
||||
|
|
@ -106,7 +88,6 @@ properties:
|
|||
- qcom,sm8250-config-noc
|
||||
- qcom,sm8250-dc-noc
|
||||
- qcom,sm8250-gem-noc
|
||||
- qcom,sm8250-ipa-virt
|
||||
- qcom,sm8250-mc-virt
|
||||
- qcom,sm8250-mmss-noc
|
||||
- qcom,sm8250-npu-noc
|
||||
|
|
@ -121,17 +102,6 @@ properties:
|
|||
- qcom,sm8350-mmss-noc
|
||||
- qcom,sm8350-compute-noc
|
||||
- qcom,sm8350-system-noc
|
||||
- qcom,sm8450-aggre1-noc
|
||||
- qcom,sm8450-aggre2-noc
|
||||
- qcom,sm8450-clk-virt
|
||||
- qcom,sm8450-config-noc
|
||||
- qcom,sm8450-gem-noc
|
||||
- qcom,sm8450-lpass-ag-noc
|
||||
- qcom,sm8450-mc-virt
|
||||
- qcom,sm8450-mmss-noc
|
||||
- qcom,sm8450-nsp-noc
|
||||
- qcom,sm8450-pcie-anoc
|
||||
- qcom,sm8450-system-noc
|
||||
|
||||
'#interconnect-cells': true
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,50 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/interconnect/qcom,sa8775p-rpmh.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Qualcomm RPMh Network-On-Chip Interconnect on SA8775P
|
||||
|
||||
maintainers:
|
||||
- Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
||||
|
||||
description: |
|
||||
RPMh interconnect providers support system bandwidth requirements through
|
||||
RPMh hardware accelerators known as Bus Clock Manager (BCM).
|
||||
|
||||
See also:: include/dt-bindings/interconnect/qcom,sa8775p.h
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- qcom,sa8775p-aggre1-noc
|
||||
- qcom,sa8775p-aggre2-noc
|
||||
- qcom,sa8775p-clk-virt
|
||||
- qcom,sa8775p-config-noc
|
||||
- qcom,sa8775p-dc-noc
|
||||
- qcom,sa8775p-gem-noc
|
||||
- qcom,sa8775p-gpdsp-anoc
|
||||
- qcom,sa8775p-lpass-ag-noc
|
||||
- qcom,sa8775p-mc-virt
|
||||
- qcom,sa8775p-mmss-noc
|
||||
- qcom,sa8775p-nspa-noc
|
||||
- qcom,sa8775p-nspb-noc
|
||||
- qcom,sa8775p-pcie-anoc
|
||||
- qcom,sa8775p-system-noc
|
||||
|
||||
required:
|
||||
- compatible
|
||||
|
||||
allOf:
|
||||
- $ref: qcom,rpmh-common.yaml#
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
aggre1_noc: interconnect-aggre1-noc {
|
||||
compatible = "qcom,sa8775p-aggre1-noc";
|
||||
#interconnect-cells = <2>;
|
||||
qcom,bcm-voters = <&apps_bcm_voter>;
|
||||
};
|
||||
|
|
@ -0,0 +1,71 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/interconnect/qcom,sc7280-rpmh.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Qualcomm RPMh Network-On-Chip Interconnect on SC7280
|
||||
|
||||
maintainers:
|
||||
- Bjorn Andersson <andersson@kernel.org>
|
||||
- Konrad Dybcio <konrad.dybcio@linaro.org>
|
||||
|
||||
description: |
|
||||
RPMh interconnect providers support system bandwidth requirements through
|
||||
RPMh hardware accelerators known as Bus Clock Manager (BCM).
|
||||
|
||||
See also:: include/dt-bindings/interconnect/qcom,sc7280.h
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- qcom,sc7280-aggre1-noc
|
||||
- qcom,sc7280-aggre2-noc
|
||||
- qcom,sc7280-clk-virt
|
||||
- qcom,sc7280-cnoc2
|
||||
- qcom,sc7280-cnoc3
|
||||
- qcom,sc7280-dc-noc
|
||||
- qcom,sc7280-gem-noc
|
||||
- qcom,sc7280-lpass-ag-noc
|
||||
- qcom,sc7280-mc-virt
|
||||
- qcom,sc7280-mmss-noc
|
||||
- qcom,sc7280-nsp-noc
|
||||
- qcom,sc7280-system-noc
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
|
||||
allOf:
|
||||
- $ref: qcom,rpmh-common.yaml#
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- qcom,sc7280-clk-virt
|
||||
then:
|
||||
properties:
|
||||
reg: false
|
||||
else:
|
||||
required:
|
||||
- reg
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
interconnect {
|
||||
compatible = "qcom,sc7280-clk-virt";
|
||||
#interconnect-cells = <2>;
|
||||
qcom,bcm-voters = <&apps_bcm_voter>;
|
||||
};
|
||||
|
||||
interconnect@9100000 {
|
||||
reg = <0x9100000 0xe2200>;
|
||||
compatible = "qcom,sc7280-gem-noc";
|
||||
#interconnect-cells = <2>;
|
||||
qcom,bcm-voters = <&apps_bcm_voter>;
|
||||
};
|
||||
|
|
@ -0,0 +1,49 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/interconnect/qcom,sc8280xp-rpmh.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Qualcomm RPMh Network-On-Chip Interconnect on SC8280XP
|
||||
|
||||
maintainers:
|
||||
- Bjorn Andersson <andersson@kernel.org>
|
||||
- Konrad Dybcio <konrad.dybcio@linaro.org>
|
||||
|
||||
description: |
|
||||
RPMh interconnect providers support system bandwidth requirements through
|
||||
RPMh hardware accelerators known as Bus Clock Manager (BCM).
|
||||
|
||||
See also:: include/dt-bindings/interconnect/qcom,sc8280xp.h
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- qcom,sc8280xp-aggre1-noc
|
||||
- qcom,sc8280xp-aggre2-noc
|
||||
- qcom,sc8280xp-clk-virt
|
||||
- qcom,sc8280xp-config-noc
|
||||
- qcom,sc8280xp-dc-noc
|
||||
- qcom,sc8280xp-gem-noc
|
||||
- qcom,sc8280xp-lpass-ag-noc
|
||||
- qcom,sc8280xp-mc-virt
|
||||
- qcom,sc8280xp-mmss-noc
|
||||
- qcom,sc8280xp-nspa-noc
|
||||
- qcom,sc8280xp-nspb-noc
|
||||
- qcom,sc8280xp-system-noc
|
||||
|
||||
required:
|
||||
- compatible
|
||||
|
||||
allOf:
|
||||
- $ref: qcom,rpmh-common.yaml#
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
interconnect-0 {
|
||||
compatible = "qcom,sc8280xp-aggre1-noc";
|
||||
#interconnect-cells = <2>;
|
||||
qcom,bcm-voters = <&apps_bcm_voter>;
|
||||
};
|
||||
|
|
@ -0,0 +1,124 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/interconnect/qcom,sm8450-rpmh.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Qualcomm RPMh Network-On-Chip Interconnect on SM8450
|
||||
|
||||
maintainers:
|
||||
- Bjorn Andersson <andersson@kernel.org>
|
||||
- Konrad Dybcio <konrad.dybcio@linaro.org>
|
||||
|
||||
description: |
|
||||
RPMh interconnect providers support system bandwidth requirements through
|
||||
RPMh hardware accelerators known as Bus Clock Manager (BCM).
|
||||
|
||||
See also:: include/dt-bindings/interconnect/qcom,sm8450.h
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- qcom,sm8450-aggre1-noc
|
||||
- qcom,sm8450-aggre2-noc
|
||||
- qcom,sm8450-clk-virt
|
||||
- qcom,sm8450-config-noc
|
||||
- qcom,sm8450-gem-noc
|
||||
- qcom,sm8450-lpass-ag-noc
|
||||
- qcom,sm8450-mc-virt
|
||||
- qcom,sm8450-mmss-noc
|
||||
- qcom,sm8450-nsp-noc
|
||||
- qcom,sm8450-pcie-anoc
|
||||
- qcom,sm8450-system-noc
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
minItems: 1
|
||||
maxItems: 4
|
||||
|
||||
required:
|
||||
- compatible
|
||||
|
||||
allOf:
|
||||
- $ref: qcom,rpmh-common.yaml#
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- qcom,sm8450-clk-virt
|
||||
- qcom,sm8450-mc-virt
|
||||
then:
|
||||
properties:
|
||||
reg: false
|
||||
else:
|
||||
required:
|
||||
- reg
|
||||
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- qcom,sm8450-aggre1-noc
|
||||
then:
|
||||
properties:
|
||||
clocks:
|
||||
items:
|
||||
- description: aggre UFS PHY AXI clock
|
||||
- description: aggre USB3 PRIM AXI clock
|
||||
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- qcom,sm8450-aggre2-noc
|
||||
then:
|
||||
properties:
|
||||
clocks:
|
||||
items:
|
||||
- description: aggre-NOC PCIe 0 AXI clock
|
||||
- description: aggre-NOC PCIe 1 AXI clock
|
||||
- description: aggre UFS PHY AXI clock
|
||||
- description: RPMH CC IPA clock
|
||||
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- qcom,sm8450-aggre1-noc
|
||||
- qcom,sm8450-aggre2-noc
|
||||
then:
|
||||
required:
|
||||
- clocks
|
||||
else:
|
||||
properties:
|
||||
clocks: false
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/qcom,gcc-sm8450.h>
|
||||
#include <dt-bindings/clock/qcom,rpmh.h>
|
||||
|
||||
interconnect-0 {
|
||||
compatible = "qcom,sm8450-clk-virt";
|
||||
#interconnect-cells = <2>;
|
||||
qcom,bcm-voters = <&apps_bcm_voter>;
|
||||
};
|
||||
|
||||
interconnect@1700000 {
|
||||
compatible = "qcom,sm8450-aggre2-noc";
|
||||
reg = <0x01700000 0x31080>;
|
||||
#interconnect-cells = <2>;
|
||||
qcom,bcm-voters = <&apps_bcm_voter>;
|
||||
clocks = <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
|
||||
<&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
|
||||
<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
|
||||
<&rpmhcc RPMH_IPA_CLK>;
|
||||
};
|
||||
|
|
@ -196,6 +196,8 @@ properties:
|
|||
maxItems: 2
|
||||
|
||||
operating-points-v2: true
|
||||
opp-table:
|
||||
type: object
|
||||
|
||||
samsung,data-clock-ratio:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
|
|
@ -227,6 +229,31 @@ examples:
|
|||
operating-points-v2 = <&bus_dmc_opp_table>;
|
||||
devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
|
||||
vdd-supply = <&buck1_reg>;
|
||||
|
||||
bus_dmc_opp_table: opp-table {
|
||||
compatible = "operating-points-v2";
|
||||
|
||||
opp-50000000 {
|
||||
opp-hz = /bits/ 64 <50000000>;
|
||||
opp-microvolt = <800000>;
|
||||
};
|
||||
opp-100000000 {
|
||||
opp-hz = /bits/ 64 <100000000>;
|
||||
opp-microvolt = <800000>;
|
||||
};
|
||||
opp-134000000 {
|
||||
opp-hz = /bits/ 64 <134000000>;
|
||||
opp-microvolt = <800000>;
|
||||
};
|
||||
opp-200000000 {
|
||||
opp-hz = /bits/ 64 <200000000>;
|
||||
opp-microvolt = <825000>;
|
||||
};
|
||||
opp-400000000 {
|
||||
opp-hz = /bits/ 64 <400000000>;
|
||||
opp-microvolt = <875000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ppmu_dmc0: ppmu@106a0000 {
|
||||
|
|
|
|||
|
|
@ -0,0 +1,47 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/misc/xlnx,tmr-inject.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Xilinx Triple Modular Redundancy(TMR) Inject IP
|
||||
|
||||
maintainers:
|
||||
- Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com>
|
||||
|
||||
description: |
|
||||
The Triple Modular Redundancy(TMR) Inject core provides functional fault
|
||||
injection by changing selected MicroBlaze instructions, which provides the
|
||||
possibility to verify that the TMR subsystem error detection and fault
|
||||
recovery logic is working properly.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- xlnx,tmr-inject-1.0
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
xlnx,magic:
|
||||
minimum: 0
|
||||
maximum: 255
|
||||
description: |
|
||||
Magic number, When configured it allows the controller to perform
|
||||
recovery.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- xlnx,magic
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
fault-inject@44a30000 {
|
||||
compatible = "xlnx,tmr-inject-1.0";
|
||||
reg = <0x44a10000 0x10000>;
|
||||
xlnx,magic = <0x46>;
|
||||
};
|
||||
|
|
@ -0,0 +1,47 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/misc/xlnx,tmr-manager.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Xilinx Triple Modular Redundancy(TMR) Manager IP
|
||||
|
||||
maintainers:
|
||||
- Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com>
|
||||
|
||||
description: |
|
||||
The Triple Modular Redundancy(TMR) Manager is responsible for handling the
|
||||
TMR subsystem state, including fault detection and error recovery. The core
|
||||
is triplicated in each of the sub-blocks in the TMR subsystem, and provides
|
||||
majority voting of its internal state.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- xlnx,tmr-manager-1.0
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
xlnx,magic1:
|
||||
minimum: 0
|
||||
maximum: 255
|
||||
description:
|
||||
Magic byte 1, When configured it allows the controller to perform
|
||||
recovery.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- xlnx,magic1
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
tmr-manager@44a10000 {
|
||||
compatible = "xlnx,tmr-manager-1.0";
|
||||
reg = <0x44a10000 0x10000>;
|
||||
xlnx,magic1 = <0x46>;
|
||||
};
|
||||
|
|
@ -19,16 +19,21 @@ properties:
|
|||
- qcom,apq8064-qfprom
|
||||
- qcom,apq8084-qfprom
|
||||
- qcom,ipq8064-qfprom
|
||||
- qcom,msm8974-qfprom
|
||||
- qcom,ipq8074-qfprom
|
||||
- qcom,msm8916-qfprom
|
||||
- qcom,msm8974-qfprom
|
||||
- qcom,msm8976-qfprom
|
||||
- qcom,msm8996-qfprom
|
||||
- qcom,msm8998-qfprom
|
||||
- qcom,qcs404-qfprom
|
||||
- qcom,sc7180-qfprom
|
||||
- qcom,sc7280-qfprom
|
||||
- qcom,sdm630-qfprom
|
||||
- qcom,sdm670-qfprom
|
||||
- qcom,sdm845-qfprom
|
||||
- qcom,sm6115-qfprom
|
||||
- qcom,sm8150-qfprom
|
||||
- qcom,sm8250-qfprom
|
||||
- const: qcom,qfprom
|
||||
|
||||
reg:
|
||||
|
|
|
|||
|
|
@ -278,6 +278,13 @@ To get all available archs you can also specify all. E.g.::
|
|||
|
||||
$ make ALLSOURCE_ARCHS=all tags
|
||||
|
||||
IGNORE_DIRS
|
||||
-----------
|
||||
For tags/TAGS/cscope targets, you can choose which directories won't
|
||||
be included in the databases, separated by blank space. E.g.::
|
||||
|
||||
$ make IGNORE_DIRS="drivers/gpu/drm/radeon tools" cscope
|
||||
|
||||
KBUILD_BUILD_TIMESTAMP
|
||||
----------------------
|
||||
Setting this to a date string overrides the timestamp used in the
|
||||
|
|
|
|||
|
|
@ -0,0 +1,52 @@
|
|||
.. SPDX-License-Identifier: GPL-2.0
|
||||
|
||||
=================================================================
|
||||
The trace performance monitoring and diagnostics aggregator(TPDA)
|
||||
=================================================================
|
||||
|
||||
:Author: Jinlong Mao <quic_jinlmao@quicinc.com>
|
||||
:Date: January 2023
|
||||
|
||||
Hardware Description
|
||||
--------------------
|
||||
|
||||
TPDA - The trace performance monitoring and diagnostics aggregator or
|
||||
TPDA in short serves as an arbitration and packetization engine for the
|
||||
performance monitoring and diagnostics network specification.
|
||||
The primary use case of the TPDA is to provide packetization, funneling
|
||||
and timestamping of Monitor data.
|
||||
|
||||
|
||||
Sysfs files and directories
|
||||
---------------------------
|
||||
Root: ``/sys/bus/coresight/devices/tpda<N>``
|
||||
|
||||
Config details
|
||||
---------------------------
|
||||
|
||||
The tpdm and tpda nodes should be observed at the coresight path
|
||||
"/sys/bus/coresight/devices".
|
||||
e.g.
|
||||
/sys/bus/coresight/devices # ls -l | grep tpd
|
||||
tpda0 -> ../../../devices/platform/soc@0/6004000.tpda/tpda0
|
||||
tpdm0 -> ../../../devices/platform/soc@0/6c08000.mm.tpdm/tpdm0
|
||||
|
||||
We can use the commands are similar to the below to validate TPDMs.
|
||||
Enable coresight sink first. The port of tpda which is connected to
|
||||
the tpdm will be enabled after commands below.
|
||||
|
||||
echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink
|
||||
echo 1 > /sys/bus/coresight/devices/tpdm0/enable_source
|
||||
echo 1 > /sys/bus/coresight/devices/tpdm0/integration_test
|
||||
echo 2 > /sys/bus/coresight/devices/tpdm0/integration_test
|
||||
|
||||
The test data will be collected in the coresight sink which is enabled.
|
||||
If rwp register of the sink is keeping updating when do
|
||||
integration_test (by cat tmc_etf0/mgmt/rwp), it means there is data
|
||||
generated from TPDM to sink.
|
||||
|
||||
There must be a tpda between tpdm and the sink. When there are some
|
||||
other trace event hw components in the same HW block with tpdm, tpdm
|
||||
and these hw components will connect to the coresight funnel. When
|
||||
there is only tpdm trace hw in the HW block, tpdm will connect to
|
||||
tpda directly.
|
||||
|
|
@ -0,0 +1,45 @@
|
|||
.. SPDX-License-Identifier: GPL-2.0
|
||||
|
||||
==========================================================
|
||||
Trace performance monitoring and diagnostics monitor(TPDM)
|
||||
==========================================================
|
||||
|
||||
:Author: Jinlong Mao <quic_jinlmao@quicinc.com>
|
||||
:Date: January 2023
|
||||
|
||||
Hardware Description
|
||||
--------------------
|
||||
TPDM - The trace performance monitoring and diagnostics monitor or TPDM in
|
||||
short serves as data collection component for various dataset types.
|
||||
The primary use case of the TPDM is to collect data from different data
|
||||
sources and send it to a TPDA for packetization, timestamping and funneling.
|
||||
|
||||
Sysfs files and directories
|
||||
---------------------------
|
||||
Root: ``/sys/bus/coresight/devices/tpdm<N>``
|
||||
|
||||
----
|
||||
|
||||
:File: ``enable_source`` (RW)
|
||||
:Notes:
|
||||
- > 0 : enable the datasets of TPDM.
|
||||
|
||||
- = 0 : disable the datasets of TPDM.
|
||||
|
||||
:Syntax:
|
||||
``echo 1 > enable_source``
|
||||
|
||||
----
|
||||
|
||||
:File: ``integration_test`` (wo)
|
||||
:Notes:
|
||||
Integration test will generate test data for tpdm.
|
||||
|
||||
:Syntax:
|
||||
``echo value > integration_test``
|
||||
|
||||
value - 1 or 2.
|
||||
|
||||
----
|
||||
|
||||
.. This text is intentionally added to make Sphinx happy.
|
||||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue