UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

phy: exynos5-usbdrd: Add Exynos850 support 

Implement Exynos850 USB 2.0 DRD PHY controller support. Exynos850 has
quite a different PHY controller than Exynos5 compatible controllers,
but it's still possible to implement it on top of existing
exynos5-usbdrd driver infrastructure.

Only UTMI+ (USB 2.0) PHY interface is implemented, as Exynos850 doesn't
support USB 3.0.

Only two clocks are used for this controller:
  - phy: bus clock, used for PHY registers access
  - ref: PHY reference clock (OSCCLK)

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230819031731.22618-7-semen.protsenko@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This commit is contained in:
Sam Protsenko 2023-08-18 22:17:29 -05:00 committed by Vinod Koul
parent 255ec3879d
commit 691525074d
1 changed files with 169 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

169
drivers/phy/samsung/phy-exynos5-usbdrd.c
View File

@ -145,6 +145,34 @@
#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_62M5 (0x20 << 4)
#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_96M_100M (0x40 << 4)
/* Exynos850: USB DRD PHY registers */
#define EXYNOS850_DRD_LINKCTRL 0x04
#define LINKCTRL_BUS_FILTER_BYPASS(_x) ((_x) << 4)
#define LINKCTRL_FORCE_QACT BIT(8)
#define EXYNOS850_DRD_CLKRST 0x20
#define CLKRST_LINK_SW_RST BIT(0)
#define CLKRST_PORT_RST BIT(1)
#define CLKRST_PHY_SW_RST BIT(3)
#define EXYNOS850_DRD_UTMI 0x50
#define UTMI_FORCE_SLEEP BIT(0)
#define UTMI_FORCE_SUSPEND BIT(1)
#define UTMI_DM_PULLDOWN BIT(2)
#define UTMI_DP_PULLDOWN BIT(3)
#define UTMI_FORCE_BVALID BIT(4)
#define UTMI_FORCE_VBUSVALID BIT(5)
#define EXYNOS850_DRD_HSP 0x54
#define HSP_COMMONONN BIT(8)
#define HSP_EN_UTMISUSPEND BIT(9)
#define HSP_VBUSVLDEXT BIT(12)
#define HSP_VBUSVLDEXTSEL BIT(13)
#define HSP_FSV_OUT_EN BIT(24)
#define EXYNOS850_DRD_HSP_TEST 0x5c
#define HSP_TEST_SIDDQ BIT(24)
#define KHZ 1000
#define MHZ (KHZ * KHZ)
@ -716,6 +744,129 @@ static const struct phy_ops exynos5_usbdrd_phy_ops = {
.owner = THIS_MODULE,
};
static void exynos850_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd)
{
void __iomem *regs_base = phy_drd->reg_phy;
u32 reg;
/*
* Disable HWACG (hardware auto clock gating control). This will force
* QACTIVE signal in Q-Channel interface to HIGH level, to make sure
* the PHY clock is not gated by the hardware.
*/
reg = readl(regs_base + EXYNOS850_DRD_LINKCTRL);
reg |= LINKCTRL_FORCE_QACT;
writel(reg, regs_base + EXYNOS850_DRD_LINKCTRL);
/* Start PHY Reset (POR=high) */
reg = readl(regs_base + EXYNOS850_DRD_CLKRST);
reg |= CLKRST_PHY_SW_RST;
writel(reg, regs_base + EXYNOS850_DRD_CLKRST);
/* Enable UTMI+ */
reg = readl(regs_base + EXYNOS850_DRD_UTMI);
reg &= ~(UTMI_FORCE_SUSPEND | UTMI_FORCE_SLEEP | UTMI_DP_PULLDOWN |
UTMI_DM_PULLDOWN);
writel(reg, regs_base + EXYNOS850_DRD_UTMI);
/* Set PHY clock and control HS PHY */
reg = readl(regs_base + EXYNOS850_DRD_HSP);
reg |= HSP_EN_UTMISUSPEND | HSP_COMMONONN;
writel(reg, regs_base + EXYNOS850_DRD_HSP);
/* Set VBUS Valid and D+ pull-up control by VBUS pad usage */
reg = readl(regs_base + EXYNOS850_DRD_LINKCTRL);
reg |= LINKCTRL_BUS_FILTER_BYPASS(0xf);
writel(reg, regs_base + EXYNOS850_DRD_LINKCTRL);
reg = readl(regs_base + EXYNOS850_DRD_UTMI);
reg |= UTMI_FORCE_BVALID | UTMI_FORCE_VBUSVALID;
writel(reg, regs_base + EXYNOS850_DRD_UTMI);
reg = readl(regs_base + EXYNOS850_DRD_HSP);
reg |= HSP_VBUSVLDEXT | HSP_VBUSVLDEXTSEL;
writel(reg, regs_base + EXYNOS850_DRD_HSP);
/* Power up PHY analog blocks */
reg = readl(regs_base + EXYNOS850_DRD_HSP_TEST);
reg &= ~HSP_TEST_SIDDQ;
writel(reg, regs_base + EXYNOS850_DRD_HSP_TEST);
/* Finish PHY reset (POR=low) */
udelay(10); /* required before doing POR=low */
reg = readl(regs_base + EXYNOS850_DRD_CLKRST);
reg &= ~(CLKRST_PHY_SW_RST | CLKRST_PORT_RST);
writel(reg, regs_base + EXYNOS850_DRD_CLKRST);
udelay(75); /* required after POR=low for guaranteed PHY clock */
/* Disable single ended signal out */
reg = readl(regs_base + EXYNOS850_DRD_HSP);
reg &= ~HSP_FSV_OUT_EN;
writel(reg, regs_base + EXYNOS850_DRD_HSP);
}
static int exynos850_usbdrd_phy_init(struct phy *phy)
{
struct phy_usb_instance *inst = phy_get_drvdata(phy);
struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
int ret;
ret = clk_prepare_enable(phy_drd->clk);
if (ret)
return ret;
/* UTMI or PIPE3 specific init */
inst->phy_cfg->phy_init(phy_drd);
clk_disable_unprepare(phy_drd->clk);
return 0;
}
static int exynos850_usbdrd_phy_exit(struct phy *phy)
{
struct phy_usb_instance *inst = phy_get_drvdata(phy);
struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
void __iomem *regs_base = phy_drd->reg_phy;
u32 reg;
int ret;
ret = clk_prepare_enable(phy_drd->clk);
if (ret)
return ret;
/* Set PHY clock and control HS PHY */
reg = readl(regs_base + EXYNOS850_DRD_UTMI);
reg &= ~(UTMI_DP_PULLDOWN | UTMI_DM_PULLDOWN);
reg |= UTMI_FORCE_SUSPEND | UTMI_FORCE_SLEEP;
writel(reg, regs_base + EXYNOS850_DRD_UTMI);
/* Power down PHY analog blocks */
reg = readl(regs_base + EXYNOS850_DRD_HSP_TEST);
reg |= HSP_TEST_SIDDQ;
writel(reg, regs_base + EXYNOS850_DRD_HSP_TEST);
/* Link reset */
reg = readl(regs_base + EXYNOS850_DRD_CLKRST);
reg |= CLKRST_LINK_SW_RST;
writel(reg, regs_base + EXYNOS850_DRD_CLKRST);
udelay(10); /* required before doing POR=low */
reg &= ~CLKRST_LINK_SW_RST;
writel(reg, regs_base + EXYNOS850_DRD_CLKRST);
clk_disable_unprepare(phy_drd->clk);
return 0;
}
static const struct phy_ops exynos850_usbdrd_phy_ops = {
.init = exynos850_usbdrd_phy_init,
.exit = exynos850_usbdrd_phy_exit,
.power_on = exynos5_usbdrd_phy_power_on,
.power_off = exynos5_usbdrd_phy_power_off,
.owner = THIS_MODULE,
};
static int exynos5_usbdrd_phy_clk_handle(struct exynos5_usbdrd_phy *phy_drd)
{
unsigned long ref_rate;
@ -782,6 +933,14 @@ static const struct exynos5_usbdrd_phy_config phy_cfg_exynos5[] = {
},
};
static const struct exynos5_usbdrd_phy_config phy_cfg_exynos850[] = {
{
.id = EXYNOS5_DRDPHY_UTMI,
.phy_isol = exynos5_usbdrd_phy_isol,
.phy_init = exynos850_usbdrd_utmi_init,
},
};
static const struct exynos5_usbdrd_phy_drvdata exynos5420_usbdrd_phy = {
.phy_cfg = phy_cfg_exynos5,
.phy_ops = &exynos5_usbdrd_phy_ops,
@ -812,6 +971,13 @@ static const struct exynos5_usbdrd_phy_drvdata exynos7_usbdrd_phy = {
.has_common_clk_gate = false,
};
static const struct exynos5_usbdrd_phy_drvdata exynos850_usbdrd_phy = {
.phy_cfg = phy_cfg_exynos850,
.phy_ops = &exynos850_usbdrd_phy_ops,
.pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL,
.has_common_clk_gate = true,
};
static const struct of_device_id exynos5_usbdrd_phy_of_match[] = {
{
.compatible = "samsung,exynos5250-usbdrd-phy",
@ -825,6 +991,9 @@ static const struct of_device_id exynos5_usbdrd_phy_of_match[] = {
}, {
.compatible = "samsung,exynos7-usbdrd-phy",
.data = &exynos7_usbdrd_phy
}, {
.compatible = "samsung,exynos850-usbdrd-phy",
.data = &exynos850_usbdrd_phy
},
{ },
};