UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 

Pull networking updates from David Miller:

 1) BBR TCP congestion control, from Neal Cardwell, Yuchung Cheng and
    co. at Google. https://lwn.net/Articles/701165/

 2) Do TCP Small Queues for retransmits, from Eric Dumazet.

 3) Support collect_md mode for all IPV4 and IPV6 tunnels, from Alexei
    Starovoitov.

 4) Allow cls_flower to classify packets in ip tunnels, from Amir Vadai.

 5) Support DSA tagging in older mv88e6xxx switches, from Andrew Lunn.

 6) Support GMAC protocol in iwlwifi mwm, from Ayala Beker.

 7) Support ndo_poll_controller in mlx5, from Calvin Owens.

 8) Move VRF processing to an output hook and allow l3mdev to be
    loopback, from David Ahern.

 9) Support SOCK_DESTROY for UDP sockets. Also from David Ahern.

10) Congestion control in RXRPC, from David Howells.

11) Support geneve RX offload in ixgbe, from Emil Tantilov.

12) When hitting pressure for new incoming TCP data SKBs, perform a
    partial rathern than a full purge of the OFO queue (which could be
    huge). From Eric Dumazet.

13) Convert XFRM state and policy lookups to RCU, from Florian Westphal.

14) Support RX network flow classification to igb, from Gangfeng Huang.

15) Hardware offloading of eBPF in nfp driver, from Jakub Kicinski.

16) New skbmod packet action, from Jamal Hadi Salim.

17) Remove some inefficiencies in snmp proc output, from Jia He.

18) Add FIB notifications to properly propagate route changes to
    hardware which is doing forwarding offloading. From Jiri Pirko.

19) New dsa driver for qca8xxx chips, from John Crispin.

20) Implement RFC7559 ipv6 router solicitation backoff, from Maciej
    Żenczykowski.

21) Add L3 mode to ipvlan, from Mahesh Bandewar.

22) Support 802.1ad in mlx4, from Moshe Shemesh.

23) Support hardware LRO in mediatek driver, from Nelson Chang.

24) Add TC offloading to mlx5, from Or Gerlitz.

25) Convert various drivers to ethtool ksettings interfaces, from
    Philippe Reynes.

26) TX max rate limiting for cxgb4, from Rahul Lakkireddy.

27) NAPI support for ath10k, from Rajkumar Manoharan.

28) Support XDP in mlx5, from Rana Shahout and Saeed Mahameed.

29) UDP replicast support in TIPC, from Richard Alpe.

30) Per-queue statistics for qed driver, from Sudarsana Reddy Kalluru.

31) Support BQL in thunderx driver, from Sunil Goutham.

32) TSO support in alx driver, from Tobias Regnery.

33) Add stream parser engine and use it in kcm.

34) Support async DHCP replies in ipconfig module, from Uwe
    Kleine-König.

35) DSA port fast aging for mv88e6xxx driver, from Vivien Didelot.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1715 commits)
  mlxsw: switchx2: Fix misuse of hard_header_len
  mlxsw: spectrum: Fix misuse of hard_header_len
  net/faraday: Stop NCSI device on shutdown
  net/ncsi: Introduce ncsi_stop_dev()
  net/ncsi: Rework the channel monitoring
  net/ncsi: Allow to extend NCSI request properties
  net/ncsi: Rework request index allocation
  net/ncsi: Don't probe on the reserved channel ID (0x1f)
  net/ncsi: Introduce NCSI_RESERVED_CHANNEL
  net/ncsi: Avoid unused-value build warning from ia64-linux-gcc
  net: Add netdev all_adj_list refcnt propagation to fix panic
  net: phy: Add Edge-rate driver for Microsemi PHYs.
  vmxnet3: Wake queue from reset work
  i40e: avoid NULL pointer dereference and recursive errors on early PCI error
  qed: Add RoCE ll2 & GSI support
  qed: Add support for memory registeration verbs
  qed: Add support for QP verbs
  qed: PD,PKEY and CQ verb support
  qed: Add support for RoCE hw init
  qede: Add qedr framework
  ...
This commit is contained in:
Linus Torvalds 2016-10-05 10:11:24 -07:00
parent 3ddf40e8c3 03a1eabc3f
commit 687ee0ad4e
1381 changed files with 111284 additions and 32827 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
Documentation/devicetree/bindings/net/apm-xgene-enet.txt
View File

@ -47,6 +47,9 @@ Optional properties:
Valid values are between 0 to 7, that maps to
273, 589, 899, 1222, 1480, 1806, 2147, 2464 ps
Default value is 2, which corresponds to 899 ps
- rxlos-gpios: Input gpio from SFP+ module to indicate availability of
incoming signal.
Example:
menetclk: menetclk {

45
Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt
View File

@ -6,9 +6,13 @@ Required properties:
- reg: addresses and length of the register sets for the device, must be 6
pairs of register addresses and lengths
- interrupts: interrupts for the devices, must be two interrupts
- #address-cells: must be 1, see dsa/dsa.txt
- #size-cells: must be 0, see dsa/dsa.txt
Deprecated binding required properties:
- dsa,mii-bus: phandle to the MDIO bus controller, see dsa/dsa.txt
- dsa,ethernet: phandle to the CPU network interface controller, see dsa/dsa.txt
- #size-cells: must be 0
- #address-cells: must be 2, see dsa/dsa.txt
Subnodes:
@ -39,6 +43,45 @@ Optional properties:
Example:
switch_top@f0b00000 {
compatible = "simple-bus";
#size-cells = <1>;
#address-cells = <1>;
ranges = <0 0xf0b00000 0x40804>;
ethernet_switch@0 {
compatible = "brcm,bcm7445-switch-v4.0";
#size-cells = <0>;
#address-cells = <1>;
reg = <0x0 0x40000
0x40000 0x110
0x40340 0x30
0x40380 0x30
0x40400 0x34
0x40600 0x208>;
reg-names = "core", "reg", intrl2_0", "intrl2_1",
"fcb, "acb";
interrupts = <0 0x18 0
0 0x19 0>;
brcm,num-gphy = <1>;
brcm,num-rgmii-ports = <2>;
brcm,fcb-pause-override;
brcm,acb-packets-inflight;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
label = "gphy";
reg = <0>;
};
};
};
};
Example using the old DSA DeviceTree binding:
switch_top@f0b00000 {
compatible = "simple-bus";
#size-cells = <1>;

89
Documentation/devicetree/bindings/net/dsa/qca8k.txt Normal file
View File

@ -0,0 +1,89 @@
* Qualcomm Atheros QCA8xxx switch family
Required properties:
- compatible: should be "qca,qca8337"
- #size-cells: must be 0
- #address-cells: must be 1
Subnodes:
The integrated switch subnode should be specified according to the binding
described in dsa/dsa.txt. As the QCA8K switches do not have a N:N mapping of
port and PHY id, each subnode describing a port needs to have a valid phandle
referencing the internal PHY connected to it. The CPU port of this switch is
always port 0.
Example:
&mdio0 {
phy_port1: phy@0 {
reg = <0>;
};
phy_port2: phy@1 {
reg = <1>;
};
phy_port3: phy@2 {
reg = <2>;
};
phy_port4: phy@3 {
reg = <3>;
};
phy_port5: phy@4 {
reg = <4>;
};
switch0@0 {
compatible = "qca,qca8337";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "cpu";
ethernet = <&gmac1>;
phy-mode = "rgmii";
};
port@1 {
reg = <1>;
label = "lan1";
phy-handle = <&phy_port1>;
};
port@2 {
reg = <2>;
label = "lan2";
phy-handle = <&phy_port2>;
};
port@3 {
reg = <3>;
label = "lan3";
phy-handle = <&phy_port3>;
};
port@4 {
reg = <4>;
label = "lan4";
phy-handle = <&phy_port4>;
};
port@5 {
reg = <5>;
label = "wan";
phy-handle = <&phy_port5>;
};
};
};
};

4
Documentation/devicetree/bindings/net/ethernet.txt
View File

@ -11,8 +11,8 @@ The following properties are common to the Ethernet controllers:
the maximum frame size (there's contradiction in ePAPR).
- phy-mode: string, operation mode of the PHY interface; supported values are
"mii", "gmii", "sgmii", "qsgmii", "tbi", "rev-mii", "rmii", "rgmii", "rgmii-id",
"rgmii-rxid", "rgmii-txid", "rtbi", "smii", "xgmii"; this is now a de-facto
standard property;
"rgmii-rxid", "rgmii-txid", "rtbi", "smii", "xgmii", "trgmii"; this is now a
de-facto standard property;
- phy-connection-type: the same as "phy-mode" property but described in ePAPR;
- phy-handle: phandle, specifies a reference to a node representing a PHY
device; this property is described in ePAPR and so preferred;

1
Documentation/devicetree/bindings/net/macb.txt
View File

@ -21,6 +21,7 @@ Required properties:
- clock-names: Tuple listing input clock names.
Required elements: 'pclk', 'hclk'
Optional elements: 'tx_clk'
Optional elements: 'rx_clk' applies to cdns,zynqmp-gem
- clocks: Phandles to input clocks.
Optional properties for PHY child node:

8
Documentation/devicetree/bindings/net/mediatek-net.txt
View File

@ -24,14 +24,17 @@ Required properties:
Optional properties:
- interrupt-parent: Should be the phandle for the interrupt controller
that services interrupts for this device
- mediatek,hwlro: the capability if the hardware supports LRO functions
* Ethernet MAC node
Required properties:
- compatible: Should be "mediatek,eth-mac"
- reg: The number of the MAC
- phy-handle: see ethernet.txt file in the same directory.
- phy-handle: see ethernet.txt file in the same directory and
the phy-mode "trgmii" required being provided when reg
is equal to 0 and the MAC uses fixed-link to connect
with internal switch such as MT7530.
Example:
@ -51,6 +54,7 @@ eth: ethernet@1b100000 {
reset-names = "eth";
mediatek,ethsys = <&ethsys>;
mediatek,pctl = <&syscfg_pctl_a>;
mediatek,hwlro;
#address-cells = <1>;
#size-cells = <0>;

58
Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt Normal file
View File

@ -0,0 +1,58 @@
* Microsemi - vsc8531 Giga bit ethernet phy
Required properties:
- compatible : Should contain phy id as "ethernet-phy-idAAAA.BBBB"
The PHY device uses the binding described in
Documentation/devicetree/bindings/net/phy.txt
Optional properties:
- vsc8531,vddmac : The vddmac in mV.
- vsc8531,edge-slowdown : % the edge should be slowed down relative to
the fastest possible edge time. Native sign
need not enter.
Edge rate sets the drive strength of the MAC
interface output signals. Changing the drive
strength will affect the edge rate of the output
signal. The goal of this setting is to help
reduce electrical emission (EMI) by being able
to reprogram drive strength and in effect slow
down the edge rate if desired. Table 1 shows the
impact to the edge rate per VDDMAC supply for each
drive strength setting.
Ref: Table:1 - Edge rate change below.
Note: see dt-bindings/net/mscc-phy-vsc8531.h for applicable values
Table: 1 - Edge rate change
----------------------------------------------------------------|
| Edge Rate Change (VDDMAC) |
| |
| 3300 mV 2500 mV 1800 mV 1500 mV |
|---------------------------------------------------------------|
| Default Deafult Default Default |
| (Fastest) (recommended) (recommended) |
|---------------------------------------------------------------|
| -2% -3% -5% -6% |
|---------------------------------------------------------------|
| -4% -6% -9% -14% |
|---------------------------------------------------------------|
| -7% -10% -16% -21% |
|(recommended) (recommended) |
|---------------------------------------------------------------|
| -10% -14% -23% -29% |
|---------------------------------------------------------------|
| -17% -23% -35% -42% |
|---------------------------------------------------------------|
| -29% -37% -52% -58% |
|---------------------------------------------------------------|
| -53% -63% -76% -77% |
| (slowest) |
|---------------------------------------------------------------|
Example:
vsc8531_0: ethernet-phy@0 {
compatible = "ethernet-phy-id0007.0570";
vsc8531,vddmac = <3300>;
vsc8531,edge-slowdown = <21>;
};

111
Documentation/devicetree/bindings/net/qcom-emac.txt Normal file
View File

@ -0,0 +1,111 @@
Qualcomm Technologies EMAC Gigabit Ethernet Controller
This network controller consists of two devices: a MAC and an SGMII
internal PHY. Each device is represented by a device tree node. A phandle
connects the MAC node to its corresponding internal phy node. Another
phandle points to the external PHY node.
Required properties:
MAC node:
- compatible : Should be "qcom,fsm9900-emac".
- reg : Offset and length of the register regions for the device
- interrupts : Interrupt number used by this controller
- mac-address : The 6-byte MAC address. If present, it is the default
MAC address.
- internal-phy : phandle to the internal PHY node
- phy-handle : phandle the the external PHY node
Internal PHY node:
- compatible : Should be "qcom,fsm9900-emac-sgmii" or "qcom,qdf2432-emac-sgmii".
- reg : Offset and length of the register region(s) for the device
- interrupts : Interrupt number used by this controller
The external phy child node:
- reg : The phy address
Example:
FSM9900:
soc {
#address-cells = <1>;
#size-cells = <1>;
emac0: ethernet@feb20000 {
compatible = "qcom,fsm9900-emac";
reg = <0xfeb20000 0x10000>,
<0xfeb36000 0x1000>;
interrupts = <76>;
clocks = <&gcc 0>, <&gcc 1>, <&gcc 3>, <&gcc 4>, <&gcc 5>,
<&gcc 6>, <&gcc 7>;
clock-names = "axi_clk", "cfg_ahb_clk", "high_speed_clk",
"mdio_clk", "tx_clk", "rx_clk", "sys_clk";
internal-phy = <&emac_sgmii>;
phy-handle = <&phy0>;
#address-cells = <1>;
#size-cells = <0>;
phy0: ethernet-phy@0 {
reg = <0>;
};
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins_a>;
};
emac_sgmii: ethernet@feb38000 {
compatible = "qcom,fsm9900-emac-sgmii";
reg = <0xfeb38000 0x1000>;
interrupts = <80>;
};
tlmm: pinctrl@fd510000 {
compatible = "qcom,fsm9900-pinctrl";
mdio_pins_a: mdio {
state {
pins = "gpio123", "gpio124";
function = "mdio";
};
};
};
QDF2432:
soc {
#address-cells = <2>;
#size-cells = <2>;
emac0: ethernet@38800000 {
compatible = "qcom,fsm9900-emac";
reg = <0x0 0x38800000 0x0 0x10000>,
<0x0 0x38816000 0x0 0x1000>;
interrupts = <0 256 4>;
clocks = <&gcc 0>, <&gcc 1>, <&gcc 3>, <&gcc 4>, <&gcc 5>,
<&gcc 6>, <&gcc 7>;
clock-names = "axi_clk", "cfg_ahb_clk", "high_speed_clk",
"mdio_clk", "tx_clk", "rx_clk", "sys_clk";
internal-phy = <&emac_sgmii>;
phy-handle = <&phy0>;
#address-cells = <1>;
#size-cells = <0>;
phy0: ethernet-phy@4 {
reg = <4>;
};
};
emac_sgmii: ethernet@410400 {
compatible = "qcom,qdf2432-emac-sgmii";
reg = <0x0 0x00410400 0x0 0xc00>, /* Base address */
<0x0 0x00410000 0x0 0x400>; /* Per-lane digital */
interrupts = <0 254 1>;
};

8
Documentation/devicetree/bindings/net/rockchip-dwmac.txt
View File

@ -3,8 +3,12 @@ Rockchip SoC RK3288 10/100/1000 Ethernet driver(GMAC)
The device node has following properties.
Required properties:
- compatible: Can be one of "rockchip,rk3228-gmac", "rockchip,rk3288-gmac",
"rockchip,rk3368-gmac"
- compatible: should be "rockchip,<name>-gamc"
"rockchip,rk3228-gmac": found on RK322x SoCs
"rockchip,rk3288-gmac": found on RK3288 SoCs
"rockchip,rk3366-gmac": found on RK3366 SoCs
"rockchip,rk3368-gmac": found on RK3368 SoCs
"rockchip,rk3399-gmac": found on RK3399 SoCs
- reg: addresses and length of the register sets for the device.
- interrupts: Should contain the GMAC interrupts.
- interrupt-names: Should contain the interrupt names "macirq".

2
Documentation/devicetree/bindings/net/sh_eth.txt
View File

@ -5,6 +5,8 @@ interface contains.
Required properties:
- compatible: "renesas,gether-r8a7740" if the device is a part of R8A7740 SoC.
"renesas,ether-r8a7743" if the device is a part of R8A7743 SoC.
"renesas,ether-r8a7745" if the device is a part of R8A7745 SoC.
"renesas,ether-r8a7778" if the device is a part of R8A7778 SoC.
"renesas,ether-r8a7779" if the device is a part of R8A7779 SoC.
"renesas,ether-r8a7790" if the device is a part of R8A7790 SoC.

15
Documentation/devicetree/bindings/net/smsc911x.txt
View File

@ -3,9 +3,11 @@
Required properties:
- compatible : Should be "smsc,lan<model>", "smsc,lan9115"
- reg : Address and length of the io space for SMSC LAN
- interrupts : Should contain SMSC LAN interrupt line
- interrupt-parent : Should be the phandle for the interrupt controller
that services interrupts for this device
- interrupts : one or two interrupt specifiers
- The first interrupt is the SMSC LAN interrupt line
- The second interrupt (if present) is the PME (power
management event) interrupt that is able to wake up the host
system with a 50ms pulse on network activity
- phy-mode : See ethernet.txt file in the same directory
Optional properties:
@ -21,6 +23,10 @@ Optional properties:
external PHY
- smsc,save-mac-address : Indicates that mac address needs to be saved
before resetting the controller
- reset-gpios : a GPIO line connected to the RESET (active low) signal
of the device. On many systems this is wired high so the device goes
out of reset at power-on, but if it is under program control, this
optional GPIO can wake up in response to it.
Examples:
@ -29,7 +35,8 @@ lan9220@f4000000 {
reg = <0xf4000000 0x2000000>;
phy-mode = "mii";
interrupt-parent = <&gpio1>;
interrupts = <31>;
interrupts = <31>, <32>;
reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
reg-io-width = <4>;
smsc,irq-push-pull;
};

32
Documentation/devicetree/bindings/net/stm32-dwmac.txt Normal file
View File

@ -0,0 +1,32 @@
STMicroelectronics STM32 / MCU DWMAC glue layer controller
This file documents platform glue layer for stmmac.
Please see stmmac.txt for the other unchanged properties.
The device node has following properties.
Required properties:
- compatible: Should be "st,stm32-dwmac" to select glue, and
"snps,dwmac-3.50a" to select IP version.
- clocks: Must contain a phandle for each entry in clock-names.
- clock-names: Should be "stmmaceth" for the host clock.
Should be "mac-clk-tx" for the MAC TX clock.
Should be "mac-clk-rx" for the MAC RX clock.
- st,syscon : Should be phandle/offset pair. The phandle to the syscon node which
encompases the glue register, and the offset of the control register.
Example:
ethernet@40028000 {
compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
status = "disabled";
reg = <0x40028000 0x8000>;
reg-names = "stmmaceth";
interrupts = <0 61 0>, <0 62 0>;
interrupt-names = "macirq", "eth_wake_irq";
clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
st,syscon = <&syscfg 0x4>;
snps,pbl = <8>;
snps,mixed-burst;
dma-ranges;
};

35
Documentation/devicetree/bindings/net/xilinx_gmii2rgmii.txt Normal file
View File

@ -0,0 +1,35 @@
XILINX GMIITORGMII Converter Driver Device Tree Bindings
--------------------------------------------------------
The Gigabit Media Independent Interface (GMII) to Reduced Gigabit Media
Independent Interface (RGMII) core provides the RGMII between RGMII-compliant
Ethernet physical media devices (PHY) and the Gigabit Ethernet controller.
This core can be used in all three modes of operation(10/100/1000 Mb/s).
The Management Data Input/Output (MDIO) interface is used to configure the
Speed of operation. This core can switch dynamically between the three
Different speed modes by configuring the conveter register through mdio write.
This converter sits between the ethernet MAC and the external phy.
MAC <==> GMII2RGMII <==> RGMII_PHY
For more details about mdio please refer phy.txt file in the same directory.
Required properties:
- compatible : Should be "xlnx,gmii-to-rgmii-1.0"
- reg : The ID number for the phy, usually a small integer
- phy-handle : Should point to the external phy device.
See ethernet.txt file in the same directory.
Example:
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy: ethernet-phy@0 {
......
};
gmiitorgmii: gmiitorgmii@8 {
compatible = "xlnx,gmii-to-rgmii-1.0";
reg = <8>;
phy-handle = <&phy>;
};
};

2
Documentation/networking/00-INDEX
View File

@ -74,6 +74,8 @@ dns_resolver.txt
- The DNS resolver module allows kernel servies to make DNS queries.
driver.txt
- Softnet driver issues.
ena.txt
- info on Amazon's Elastic Network Adapter (ENA)
e100.txt
- info on Intel's EtherExpress PRO/100 line of 10/100 boards
e1000.txt

17
Documentation/networking/batman-adv.txt
View File

@ -43,10 +43,15 @@ new interfaces to verify the compatibility. There is no need to
reload the module if you plug your USB wifi adapter into your ma-
chine after batman advanced was initially loaded.
To activate a given interface simply write "bat0" into its
"mesh_iface" file inside the batman_adv subfolder:
The batman-adv soft-interface can be created using the iproute2
tool "ip"
# echo bat0 > /sys/class/net/eth0/batman_adv/mesh_iface
# ip link add name bat0 type batadv
To activate a given interface simply attach it to the "bat0"
interface
# ip link set dev eth0 master bat0
Repeat this step for all interfaces you wish to add. Now batman
starts using/broadcasting on this/these interface(s).
@ -56,10 +61,10 @@ By reading the "iface_status" file you can check its status:
# cat /sys/class/net/eth0/batman_adv/iface_status
# active
To deactivate an interface you have to write "none" into its
"mesh_iface" file:
To deactivate an interface you have to detach it from the
"bat0" interface:
# echo none > /sys/class/net/eth0/batman_adv/mesh_iface
# ip link set dev eth0 nomaster
All mesh wide settings can be found in batman's own interface

33
Documentation/networking/dsa/dsa.txt
View File

@ -227,9 +227,9 @@ to address individual switches in the tree.
dsa_switch: structure describing a switch device in the tree, referencing a
dsa_switch_tree as a backpointer, slave network devices, master network device,
and a reference to the backing dsa_switch_driver
and a reference to the backing dsa_switch_ops
dsa_switch_driver: structure referencing function pointers, see below for a full
dsa_switch_ops: structure referencing function pointers, see below for a full
description.
Design limitations
@ -357,10 +357,10 @@ regular HWMON devices in /sys/class/hwmon/.
Driver development
==================
DSA switch drivers need to implement a dsa_switch_driver structure which will
DSA switch drivers need to implement a dsa_switch_ops structure which will
contain the various members described below.
register_switch_driver() registers this dsa_switch_driver in its internal list
register_switch_driver() registers this dsa_switch_ops in its internal list
of drivers to probe for. unregister_switch_driver() does the exact opposite.
Unless requested differently by setting the priv_size member accordingly, DSA
@ -379,7 +379,7 @@ Switch configuration
buses, return a non-NULL string
- setup: setup function for the switch, this function is responsible for setting
up the dsa_switch_driver private structure with all it needs: register maps,
up the dsa_switch_ops private structure with all it needs: register maps,
interrupts, mutexes, locks etc.. This function is also expected to properly
configure the switch to separate all network interfaces from each other, that
is, they should be isolated by the switch hardware itself, typically by creating
@ -584,6 +584,29 @@ of DSA, would be the its port-based VLAN, used by the associated bridge device.
function that the driver has to call for each MAC address known to be behind
the given port. A switchdev object is used to carry the VID and FDB info.
- port_mdb_prepare: bridge layer function invoked when the bridge prepares the
installation of a multicast database entry. If the operation is not supported,
this function should return -EOPNOTSUPP to inform the bridge code to fallback
to a software implementation. No hardware setup must be done in this function.
See port_fdb_add for this and details.
- port_mdb_add: bridge layer function invoked when the bridge wants to install
a multicast database entry, the switch hardware should be programmed with the
specified address in the specified VLAN ID in the forwarding database
associated with this VLAN ID.
Note: VLAN ID 0 corresponds to the port private database, which, in the context
of DSA, would be the its port-based VLAN, used by the associated bridge device.
- port_mdb_del: bridge layer function invoked when the bridge wants to remove a
multicast database entry, the switch hardware should be programmed to delete
the specified MAC address from the specified VLAN ID if it was mapped into
this port forwarding database.
- port_mdb_dump: bridge layer function invoked with a switchdev callback
function that the driver has to call for each MAC address known to be behind
the given port. A switchdev object is used to carry the VID and MDB info.
TODO
====

305
Documentation/networking/ena.txt Normal file
View File

@ -0,0 +1,305 @@
Linux kernel driver for Elastic Network Adapter (ENA) family:
=============================================================
Overview:
=========
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, adaptive interrupt moderation,
and CPU cacheline optimized data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds.
Supported PCI vendor ID/device IDs:
===================================
1d0f:0ec2 - ENA PF
1d0f:1ec2 - ENA PF with LLQ support
1d0f:ec20 - ENA VF
1d0f:ec21 - ENA VF with LLQ support
ENA Source Code Directory Structure:
====================================
ena_com.[ch] - Management communication layer. This layer is
responsible for the handling all the management
(admin) communication between the device and the
driver.
ena_eth_com.[ch] - Tx/Rx data path.
ena_admin_defs.h - Definition of ENA management interface.
ena_eth_io_defs.h - Definition of ENA data path interface.
ena_common_defs.h - Common definitions for ena_com layer.
ena_regs_defs.h - Definition of ENA PCI memory-mapped (MMIO) registers.
ena_netdev.[ch] - Main Linux kernel driver.
ena_syfsfs.[ch] - Sysfs files.
ena_ethtool.c - ethtool callbacks.
ena_pci_id_tbl.h - Supported device IDs.
Management Interface:
=====================
ENA management interface is exposed by means of:
- PCIe Configuration Space
- Device Registers
- Admin Queue (AQ) and Admin Completion Queue (ACQ)
- Asynchronous Event Notification Queue (AENQ)
ENA device MMIO Registers are accessed only during driver
initialization and are not involved in further normal device
operation.
AQ is used for submitting management commands, and the
results/responses are reported asynchronously through ACQ.
ENA introduces a very small set of management commands with room for
vendor-specific extensions. Most of the management operations are
framed in a generic Get/Set feature command.
The following admin queue commands are supported:
- Create I/O submission queue
- Create I/O completion queue
- Destroy I/O submission queue
- Destroy I/O completion queue
- Get feature
- Set feature
- Configure AENQ
- Get statistics
Refer to ena_admin_defs.h for the list of supported Get/Set Feature
properties.
The Asynchronous Event Notification Queue (AENQ) is a uni-directional
queue used by the ENA device to send to the driver events that cannot
be reported using ACQ. AENQ events are subdivided into groups. Each
group may have multiple syndromes, as shown below
The events are:
Group Syndrome
Link state change - X -
Fatal error - X -
Notification Suspend traffic
Notification Resume traffic
Keep-Alive - X -
ACQ and AENQ share the same MSI-X vector.
Keep-Alive is a special mechanism that allows monitoring of the
device's health. The driver maintains a watchdog (WD) handler which,
if fired, logs the current state and statistics then resets and
restarts the ENA device and driver. A Keep-Alive event is delivered by
the device every second. The driver re-arms the WD upon reception of a
Keep-Alive event. A missed Keep-Alive event causes the WD handler to
fire.
Data Path Interface:
====================
I/O operations are based on Tx and Rx Submission Queues (Tx SQ and Rx
SQ correspondingly). Each SQ has a completion queue (CQ) associated
with it.
The SQs and CQs are implemented as descriptor rings in contiguous
physical memory.
The ENA driver supports two Queue Operation modes for Tx SQs:
- Regular mode
* In this mode the Tx SQs reside in the host's memory. The ENA
device fetches the ENA Tx descriptors and packet data from host
memory.
- Low Latency Queue (LLQ) mode or "push-mode".
* In this mode the driver pushes the transmit descriptors and the
first 128 bytes of the packet directly to the ENA device memory
space. The rest of the packet payload is fetched by the
device. For this operation mode, the driver uses a dedicated PCI
device memory BAR, which is mapped with write-combine capability.
The Rx SQs support only the regular mode.
Note: Not all ENA devices support LLQ, and this feature is negotiated
with the device upon initialization. If the ENA device does not
support LLQ mode, the driver falls back to the regular mode.
The driver supports multi-queue for both Tx and Rx. This has various
benefits:
- Reduced CPU/thread/process contention on a given Ethernet interface.
- Cache miss rate on completion is reduced, particularly for data
cache lines that hold the sk_buff structures.
- Increased process-level parallelism when handling received packets.
- Increased data cache hit rate, by steering kernel processing of
packets to the CPU, where the application thread consuming the
packet is running.
- In hardware interrupt re-direction.
Interrupt Modes:
================
The driver assigns a single MSI-X vector per queue pair (for both Tx
and Rx directions). The driver assigns an additional dedicated MSI-X vector
for management (for ACQ and AENQ).
Management interrupt registration is performed when the Linux kernel
probes the adapter, and it is de-registered when the adapter is
removed. I/O queue interrupt registration is performed when the Linux
interface of the adapter is opened, and it is de-registered when the
interface is closed.
The management interrupt is named:
ena-mgmnt@pci:<PCI domain:bus:slot.function>
and for each queue pair, an interrupt is named:
<interface name>-Tx-Rx-<queue index>
The ENA device operates in auto-mask and auto-clear interrupt
modes. That is, once MSI-X is delivered to the host, its Cause bit is
automatically cleared and the interrupt is masked. The interrupt is
unmasked by the driver after NAPI processing is complete.
Interrupt Moderation:
=====================
ENA driver and device can operate in conventional or adaptive interrupt
moderation mode.
In conventional mode the driver instructs device to postpone interrupt
posting according to static interrupt delay value. The interrupt delay
value can be configured through ethtool(8). The following ethtool
parameters are supported by the driver: tx-usecs, rx-usecs
In adaptive interrupt moderation mode the interrupt delay value is
updated by the driver dynamically and adjusted every NAPI cycle
according to the traffic nature.
By default ENA driver applies adaptive coalescing on Rx traffic and
conventional coalescing on Tx traffic.
Adaptive coalescing can be switched on/off through ethtool(8)
adaptive_rx on|off parameter.
The driver chooses interrupt delay value according to the number of
bytes and packets received between interrupt unmasking and interrupt
posting. The driver uses interrupt delay table that subdivides the
range of received bytes/packets into 5 levels and assigns interrupt
delay value to each level.
The user can enable/disable adaptive moderation, modify the interrupt
delay table and restore its default values through sysfs.
The rx_copybreak is initialized by default to ENA_DEFAULT_RX_COPYBREAK
and can be configured by the ETHTOOL_STUNABLE command of the
SIOCETHTOOL ioctl.
SKB:
The driver-allocated SKB for frames received from Rx handling using
NAPI context. The allocation method depends on the size of the packet.
If the frame length is larger than rx_copybreak, napi_get_frags()
is used, otherwise netdev_alloc_skb_ip_align() is used, the buffer
content is copied (by CPU) to the SKB, and the buffer is recycled.
Statistics:
===========
The user can obtain ENA device and driver statistics using ethtool.
The driver can collect regular or extended statistics (including
per-queue stats) from the device.
In addition the driver logs the stats to syslog upon device reset.
MTU:
====
The driver supports an arbitrarily large MTU with a maximum that is
negotiated with the device. The driver configures MTU using the
SetFeature command (ENA_ADMIN_MTU property). The user can change MTU
via ip(8) and similar legacy tools.
Stateless Offloads:
===================
The ENA driver supports:
- TSO over IPv4/IPv6
- TSO with ECN
- IPv4 header checksum offload
- TCP/UDP over IPv4/IPv6 checksum offloads
RSS:
====
- The ENA device supports RSS that allows flexible Rx traffic
steering.
- Toeplitz and CRC32 hash functions are supported.
- Different combinations of L2/L3/L4 fields can be configured as
inputs for hash functions.
- The driver configures RSS settings using the AQ SetFeature command
(ENA_ADMIN_RSS_HASH_FUNCTION, ENA_ADMIN_RSS_HASH_INPUT and
ENA_ADMIN_RSS_REDIRECTION_TABLE_CONFIG properties).
- If the NETIF_F_RXHASH flag is set, the 32-bit result of the hash
function delivered in the Rx CQ descriptor is set in the received
SKB.
- The user can provide a hash key, hash function, and configure the
indirection table through ethtool(8).
DATA PATH:
==========
Tx:
---
end_start_xmit() is called by the stack. This function does the following:
- Maps data buffers (skb->data and frags).
- Populates ena_buf for the push buffer (if the driver and device are
in push mode.)
- Prepares ENA bufs for the remaining frags.
- Allocates a new request ID from the empty req_id ring. The request
ID is the index of the packet in the Tx info. This is used for
out-of-order TX completions.
- Adds the packet to the proper place in the Tx ring.
- Calls ena_com_prepare_tx(), an ENA communication layer that converts
the ena_bufs to ENA descriptors (and adds meta ENA descriptors as
needed.)
* This function also copies the ENA descriptors and the push buffer
to the Device memory space (if in push mode.)
- Writes doorbell to the ENA device.
- When the ENA device finishes sending the packet, a completion
interrupt is raised.
- The interrupt handler schedules NAPI.
- The ena_clean_tx_irq() function is called. This function handles the
completion descriptors generated by the ENA, with a single
completion descriptor per completed packet.
* req_id is retrieved from the completion descriptor. The tx_info of
the packet is retrieved via the req_id. The data buffers are
unmapped and req_id is returned to the empty req_id ring.
* The function stops when the completion descriptors are completed or
the budget is reached.
Rx:
---
- When a packet is received from the ENA device.
- The interrupt handler schedules NAPI.
- The ena_clean_rx_irq() function is called. This function calls
ena_rx_pkt(), an ENA communication layer function, which returns the
number of descriptors used for a new unhandled packet, and zero if
no new packet is found.
- Then it calls the ena_clean_rx_irq() function.
- ena_eth_rx_skb() checks packet length:
* If the packet is small (len < rx_copybreak), the driver allocates
a SKB for the new packet, and copies the packet payload into the
SKB data buffer.
- In this way the original data buffer is not passed to the stack
and is reused for future Rx packets.
* Otherwise the function unmaps the Rx buffer, then allocates the
new SKB structure and hooks the Rx buffer to the SKB frags.
- The new SKB is updated with the necessary information (protocol,
checksum hw verify result, etc.), and then passed to the network
stack, using the NAPI interface function napi_gro_receive().

45
Documentation/networking/ip-sysctl.txt
View File

@ -575,32 +575,33 @@ tcp_syncookies - BOOLEAN
unconditionally generation of syncookies.
tcp_fastopen - INTEGER
Enable TCP Fast Open feature (draft-ietf-tcpm-fastopen) to send data
in the opening SYN packet. To use this feature, the client application
must use sendmsg() or sendto() with MSG_FASTOPEN flag rather than
connect() to perform a TCP handshake automatically.
Enable TCP Fast Open (RFC7413) to send and accept data in the opening
SYN packet.
The client support is enabled by flag 0x1 (on by default). The client
then must use sendmsg() or sendto() with the MSG_FASTOPEN flag,
rather than connect() to send data in SYN.
The server support is enabled by flag 0x2 (off by default). Then
either enable for all listeners with another flag (0x400) or
enable individual listeners via TCP_FASTOPEN socket option with
the option value being the length of the syn-data backlog.
The values (bitmap) are
1: Enables sending data in the opening SYN on the client w/ MSG_FASTOPEN.
2: Enables TCP Fast Open on the server side, i.e., allowing data in
a SYN packet to be accepted and passed to the application before
3-way hand shake finishes.
4: Send data in the opening SYN regardless of cookie availability and
without a cookie option.
0x100: Accept SYN data w/o validating the cookie.
0x200: Accept data-in-SYN w/o any cookie option present.
0x400/0x800: Enable Fast Open on all listeners regardless of the
TCP_FASTOPEN socket option. The two different flags designate two
different ways of setting max_qlen without the TCP_FASTOPEN socket
option.
0x1: (client) enables sending data in the opening SYN on the client.
0x2: (server) enables the server support, i.e., allowing data in
a SYN packet to be accepted and passed to the
application before 3-way handshake finishes.
0x4: (client) send data in the opening SYN regardless of cookie
availability and without a cookie option.
0x200: (server) accept data-in-SYN w/o any cookie option present.
0x400: (server) enable all listeners to support Fast Open by
default without explicit TCP_FASTOPEN socket option.
Default: 1
Default: 0x1
Note that the client & server side Fast Open flags (1 and 2
respectively) must be also enabled before the rest of flags can take
effect.
See include/net/tcp.h and the code for more details.
Note that that additional client or server features are only
effective if the basic support (0x1 and 0x2) are enabled respectively.
tcp_syn_retries - INTEGER
Number of times initial SYNs for an active TCP connection attempt

7
Documentation/networking/ipvlan.txt
View File

@ -22,7 +22,7 @@ The driver can be built into the kernel (CONFIG_IPVLAN=y) or as a module
There are no module parameters for this driver and it can be configured
using IProute2/ip utility.
ip link add link <master-dev> <slave-dev> type ipvlan mode { l2 | L3 }
ip link add link <master-dev> <slave-dev> type ipvlan mode { l2 | l3 | l3s }
e.g. ip link add link ipvl0 eth0 type ipvlan mode l2
@ -48,6 +48,11 @@ master device for the L2 processing and routing from that instance will be
used before packets are queued on the outbound device. In this mode the slaves
will not receive nor can send multicast / broadcast traffic.
4.3 L3S mode:
This is very similar to the L3 mode except that iptables (conn-tracking)
works in this mode and hence it is L3-symmetric (L3s). This will have slightly less
performance but that shouldn't matter since you are choosing this mode over plain-L3
mode to make conn-tracking work.
5. What to choose (macvlan vs. ipvlan)?
These two devices are very similar in many regards and the specific use

90
Documentation/networking/rxrpc.txt
View File

@ -725,7 +725,8 @@ The kernel interface functions are as follows:
(*) End a client call.
void rxrpc_kernel_end_call(struct rxrpc_call *call);
void rxrpc_kernel_end_call(struct socket *sock,
struct rxrpc_call *call);
This is used to end a previously begun call. The user_call_ID is expunged
from AF_RXRPC's knowledge and will not be seen again in association with
@ -733,7 +734,9 @@ The kernel interface functions are as follows:
(*) Send data through a call.
int rxrpc_kernel_send_data(struct rxrpc_call *call, struct msghdr *msg,
int rxrpc_kernel_send_data(struct socket *sock,
struct rxrpc_call *call,
struct msghdr *msg,
size_t len);
This is used to supply either the request part of a client call or the
@ -745,9 +748,42 @@ The kernel interface functions are as follows:
The msg must not specify a destination address, control data or any flags
other than MSG_MORE. len is the total amount of data to transmit.
(*) Receive data from a call.
int rxrpc_kernel_recv_data(struct socket *sock,
struct rxrpc_call *call,
void *buf,
size_t size,
size_t *_offset,
bool want_more,
u32 *_abort)
This is used to receive data from either the reply part of a client call
or the request part of a service call. buf and size specify how much
data is desired and where to store it. *_offset is added on to buf and
subtracted from size internally; the amount copied into the buffer is
added to *_offset before returning.
want_more should be true if further data will be required after this is
satisfied and false if this is the last item of the receive phase.
There are three normal returns: 0 if the buffer was filled and want_more
was true; 1 if the buffer was filled, the last DATA packet has been
emptied and want_more was false; and -EAGAIN if the function needs to be
called again.
If the last DATA packet is processed but the buffer contains less than
the amount requested, EBADMSG is returned. If want_more wasn't set, but
more data was available, EMSGSIZE is returned.
If a remote ABORT is detected, the abort code received will be stored in
*_abort and ECONNABORTED will be returned.
(*) Abort a call.
void rxrpc_kernel_abort_call(struct rxrpc_call *call, u32 abort_code);
void rxrpc_kernel_abort_call(struct socket *sock,
struct rxrpc_call *call,
u32 abort_code);
This is used to abort a call if it's still in an abortable state. The
abort code specified will be placed in the ABORT message sent.
@ -820,47 +856,6 @@ The kernel interface functions are as follows:
Other errors may be returned if the call had been aborted (-ECONNABORTED)
or had timed out (-ETIME).
(*) Record the delivery of a data message.
void rxrpc_kernel_data_consumed(struct rxrpc_call *call,
struct sk_buff *skb);
This is used to record a data message as having been consumed and to
update the ACK state for the call. The message must still be passed to
rxrpc_kernel_free_skb() for disposal by the caller.
(*) Free a message.
void rxrpc_kernel_free_skb(struct sk_buff *skb);
This is used to free a non-DATA socket buffer intercepted from an AF_RXRPC
socket.
(*) Determine if a data message is the last one on a call.
bool rxrpc_kernel_is_data_last(struct sk_buff *skb);
This is used to determine if a socket buffer holds the last data message
to be received for a call (true will be returned if it does, false
if not).
The data message will be part of the reply on a client call and the
request on an incoming call. In the latter case there will be more
messages, but in the former case there will not.
(*) Get the abort code from an abort message.
u32 rxrpc_kernel_get_abort_code(struct sk_buff *skb);
This is used to extract the abort code from a remote abort message.
(*) Get the error number from a local or network error message.
int rxrpc_kernel_get_error_number(struct sk_buff *skb);
This is used to extract the error number from a message indicating either
a local error occurred or a network error occurred.
(*) Allocate a null key for doing anonymous security.
struct key *rxrpc_get_null_key(const char *keyname);
@ -868,6 +863,13 @@ The kernel interface functions are as follows:
This is used to allocate a null RxRPC key that can be used to indicate
anonymous security for a particular domain.
(*) Get the peer address of a call.
void rxrpc_kernel_get_peer(struct socket *sock, struct rxrpc_call *call,
struct sockaddr_rxrpc *_srx);
This is used to find the remote peer address of a call.
=======================
CONFIGURABLE PARAMETERS

136
Documentation/networking/strparser.txt Normal file
View File

@ -0,0 +1,136 @@
Stream Parser
-------------
The stream parser (strparser) is a utility that parses messages of an
application layer protocol running over a TCP connection. The stream
parser works in conjunction with an upper layer in the kernel to provide
kernel support for application layer messages. For instance, Kernel
Connection Multiplexor (KCM) uses the Stream Parser to parse messages
using a BPF program.
Interface
---------
The API includes a context structure, a set of callbacks, utility
functions, and a data_ready function. The callbacks include
a parse_msg function that is called to perform parsing (e.g.
BPF parsing in case of KCM), and a rcv_msg function that is called
when a full message has been completed.
A stream parser can be instantiated for a TCP connection. This is done
by:
strp_init(struct strparser *strp, struct sock *csk,
struct strp_callbacks *cb)
strp is a struct of type strparser that is allocated by the upper layer.
csk is the TCP socket associated with the stream parser. Callbacks are
called by the stream parser.
Callbacks
---------
There are four callbacks:
int (*parse_msg)(struct strparser *strp, struct sk_buff *skb);
parse_msg is called to determine the length of the next message
in the stream. The upper layer must implement this function. It
should parse the sk_buff as containing the headers for the
next application layer messages in the stream.
The skb->cb in the input skb is a struct strp_rx_msg. Only
the offset field is relevant in parse_msg and gives the offset
where the message starts in the skb.
The return values of this function are:
>0 : indicates length of successfully parsed message
0 : indicates more data must be received to parse the message
-ESTRPIPE : current message should not be processed by the
kernel, return control of the socket to userspace which
can proceed to read the messages itself
other < 0 : Error is parsing, give control back to userspace
assuming that synchronization is lost and the stream
is unrecoverable (application expected to close TCP socket)
In the case that an error is returned (return value is less than
zero) the stream parser will set the error on TCP socket and wake
it up. If parse_msg returned -ESTRPIPE and the stream parser had
previously read some bytes for the current message, then the error
set on the attached socket is ENODATA since the stream is
unrecoverable in that case.
void (*rcv_msg)(struct strparser *strp, struct sk_buff *skb);
rcv_msg is called when a full message has been received and
is queued. The callee must consume the sk_buff; it can
call strp_pause to prevent any further messages from being
received in rcv_msg (see strp_pause below). This callback
must be set.
The skb->cb in the input skb is a struct strp_rx_msg. This
struct contains two fields: offset and full_len. Offset is
where the message starts in the skb, and full_len is the
the length of the message. skb->len - offset may be greater
then full_len since strparser does not trim the skb.
int (*read_sock_done)(struct strparser *strp, int err);
read_sock_done is called when the stream parser is done reading
the TCP socket. The stream parser may read multiple messages
in a loop and this function allows cleanup to occur when existing
the loop. If the callback is not set (NULL in strp_init) a
default function is used.
void (*abort_parser)(struct strparser *strp, int err);
This function is called when stream parser encounters an error
in parsing. The default function stops the stream parser for the
TCP socket and sets the error in the socket. The default function
can be changed by setting the callback to non-NULL in strp_init.
Functions
---------
The upper layer calls strp_tcp_data_ready when data is ready on the lower
socket for strparser to process. This should be called from a data_ready
callback that is set on the socket.
strp_stop is called to completely stop stream parser operations. This
is called internally when the stream parser encounters an error, and
it is called from the upper layer when unattaching a TCP socket.
strp_done is called to unattach the stream parser from the TCP socket.
This must be called after the stream processor has be stopped.
strp_check_rcv is called to check for new messages on the socket. This
is normally called at initialization of the a stream parser instance
of after strp_unpause.
Statistics
----------
Various counters are kept for each stream parser for a TCP socket.
These are in the strp_stats structure. strp_aggr_stats is a convenience
structure for accumulating statistics for multiple stream parser
instances. save_strp_stats and aggregate_strp_stats are helper functions
to save and aggregate statistics.
Message assembly limits
-----------------------
The stream parser provide mechanisms to limit the resources consumed by
message assembly.
A timer is set when assembly starts for a new message. The message
timeout is taken from rcvtime for the associated TCP socket. If the
timer fires before assembly completes the stream parser is aborted
and the ETIMEDOUT error is set on the TCP socket.
Message length is limited to the receive buffer size of the associated
TCP socket. If the length returned by parse_msg is greater than
the socket buffer size then the stream parser is aborted with
EMSGSIZE error set on the TCP socket. Note that this makes the
maximum size of receive skbuffs for a socket with a stream parser
to be 2*sk_rcvbuf of the TCP socket.

40
Documentation/networking/switchdev.txt
View File

@ -283,15 +283,10 @@ be sent to the port netdev for processing by the bridge driver. The
bridge should not reflood the packet to the same ports the device flooded,
otherwise there will be duplicate packets on the wire.
To avoid duplicate packets, the device/driver should mark a packet as already
forwarded using skb->offload_fwd_mark. The same mark is set on the device
ports in the domain using dev->offload_fwd_mark. If the skb->offload_fwd_mark
is non-zero and matches the forwarding egress port's dev->skb_mark, the kernel
will drop the skb right before transmit on the egress port, with the
understanding that the device already forwarded the packet on same egress port.
The driver can use switchdev_port_fwd_mark_set() to set a globally unique mark
for port's dev->offload_fwd_mark, based on the port's parent ID (switch ID) and
a group ifindex.
To avoid duplicate packets, the switch driver should mark a packet as already
forwarded by setting the skb->offload_fwd_mark bit. The bridge driver will mark
the skb using the ingress bridge port's mark and prevent it from being forwarded
through any bridge port with the same mark.
It is possible for the switch device to not handle flooding and push the
packets up to the bridge driver for flooding. This is not ideal as the number
@ -319,30 +314,29 @@ the kernel, with the device doing the FIB lookup and forwarding. The device
does a longest prefix match (LPM) on FIB entries matching route prefix and
forwards the packet to the matching FIB entry's nexthop(s) egress ports.
To program the device, the driver implements support for
SWITCHDEV_OBJ_IPV[4|6]_FIB object using switchdev_port_obj_xxx ops.
switchdev_port_obj_add is used for both adding a new FIB entry to the device,
or modifying an existing entry on the device.
To program the device, the driver has to register a FIB notifier handler
using register_fib_notifier. The following events are available:
FIB_EVENT_ENTRY_ADD: used for both adding a new FIB entry to the device,
or modifying an existing entry on the device.
FIB_EVENT_ENTRY_DEL: used for removing a FIB entry
FIB_EVENT_RULE_ADD, FIB_EVENT_RULE_DEL: used to propagate FIB rule changes
XXX: Currently, only SWITCHDEV_OBJ_ID_IPV4_FIB objects are supported.
FIB_EVENT_ENTRY_ADD and FIB_EVENT_ENTRY_DEL events pass:
SWITCHDEV_OBJ_ID_IPV4_FIB object passes:
struct switchdev_obj_ipv4_fib { /* IPV4_FIB */
struct fib_entry_notifier_info {
struct fib_notifier_info info; /* must be first */
u32 dst;
int dst_len;
struct fib_info *fi;
u8 tos;
u8 type;
u32 nlflags;
u32 tb_id;
} ipv4_fib;
u32 nlflags;
};
to add/modify/delete IPv4 dst/dest_len prefix on table tb_id. The *fi
structure holds details on the route and route's nexthops. *dev is one of the
port netdevs mentioned in the routes next hop list. If the output port netdevs
referenced in the route's nexthop list don't all have the same switch ID, the
driver is not called to add/modify/delete the FIB entry.
port netdevs mentioned in the route's next hop list.
Routes offloaded to the device are labeled with "offload" in the ip route
listing:
@ -360,6 +354,8 @@ listing:
12.0.0.4 via 11.0.0.9 dev sw1p2 proto zebra metric 20 offload
192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.15
The "offload" flag is set in case at least one device offloads the FIB entry.
XXX: add/mod/del IPv6 FIB API
Nexthop Resolution

22
MAINTAINERS
View File

@ -636,6 +636,15 @@ F: drivers/tty/serial/altera_jtaguart.c
F: include/linux/altera_uart.h
F: include/linux/altera_jtaguart.h
AMAZON ETHERNET DRIVERS
M: Netanel Belgazal <netanel@annapurnalabs.com>
R: Saeed Bishara <saeed@annapurnalabs.com>
R: Zorik Machulsky <zorik@annapurnalabs.com>
L: netdev@vger.kernel.org
S: Supported
F: Documentation/networking/ena.txt
F: drivers/net/ethernet/amazon/
AMD CRYPTOGRAPHIC COPROCESSOR (CCP) DRIVER
M: Tom Lendacky <thomas.lendacky@amd.com>
M: Gary Hook <gary.hook@amd.com>
@ -5596,10 +5605,9 @@ F: Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
HOST AP DRIVER
M: Jouni Malinen <j@w1.fi>
L: hostap@shmoo.com (subscribers-only)
L: linux-wireless@vger.kernel.org
W: http://hostap.epitest.fi/
S: Maintained
W: http://w1.fi/hostap-driver.html
S: Obsolete
F: drivers/net/wireless/intersil/hostap/
HP COMPAQ TC1100 TABLET WMI EXTRAS DRIVER
@ -9731,6 +9739,12 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
S: Supported
F: drivers/net/wireless/ath/ath10k/
QUALCOMM EMAC GIGABIT ETHERNET DRIVER
M: Timur Tabi <timur@codeaurora.org>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/qualcomm/emac/
QUALCOMM HEXAGON ARCHITECTURE
M: Richard Kuo <rkuo@codeaurora.org>
L: linux-hexagon@vger.kernel.org
@ -9992,6 +10006,7 @@ F: net/rfkill/
RHASHTABLE
M: Thomas Graf <tgraf@suug.ch>
M: Herbert Xu <herbert@gondor.apana.org.au>
L: netdev@vger.kernel.org
S: Maintained
F: lib/rhashtable.c
@ -12332,6 +12347,7 @@ F: drivers/net/usb/smsc75xx.*
USB SMSC95XX ETHERNET DRIVER
M: Steve Glendinning <steve.glendinning@shawell.net>
M: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/usb/smsc95xx.*

1
arch/arm64/boot/dts/apm/apm-mustang.dts
View File

@ -74,6 +74,7 @@
&xgenet {
status = "ok";
rxlos-gpios = <&sbgpio 12 1>;
};
&mmc0 {

2
arch/arm64/boot/dts/apm/apm-storm.dtsi
View File

@ -923,7 +923,7 @@
/* mac address will be overwritten by the bootloader */
local-mac-address = [00 00 00 00 00 00];
phy-connection-type = "rgmii";
phy-handle = <&menet0phy>,<&menetphy>;
phy-handle = <&menetphy>,<&menet0phy>;
mdio {
compatible = "apm,xgene-mdio";
#address-cells = <1>;

5
drivers/atm/eni.c
View File

@ -1845,8 +1845,9 @@ static int eni_start(struct atm_dev *dev)
/* initialize memory management */
buffer_mem = eni_dev->mem - (buf - eni_dev->ram);
eni_dev->free_list_size = buffer_mem/MID_MIN_BUF_SIZE/2;
eni_dev->free_list = kmalloc(
sizeof(struct eni_free)*(eni_dev->free_list_size+1),GFP_KERNEL);
eni_dev->free_list = kmalloc_array(eni_dev->free_list_size + 1,
sizeof(*eni_dev->free_list),
GFP_KERNEL);
if (!eni_dev->free_list) {
printk(KERN_ERR DEV_LABEL "(itf %d): couldn't get free page\n",
dev->number);

6
drivers/atm/fore200e.c
View File

@ -2489,7 +2489,7 @@ static int fore200e_load_and_start_fw(struct fore200e *fore200e)
{
const struct firmware *firmware;
struct device *device;
struct fw_header *fw_header;
const struct fw_header *fw_header;
const __le32 *fw_data;
u32 fw_size;
u32 __iomem *load_addr;
@ -2511,9 +2511,9 @@ static int fore200e_load_and_start_fw(struct fore200e *fore200e)
return err;
}
fw_data = (__le32 *) firmware->data;
fw_data = (const __le32 *)firmware->data;
fw_size = firmware->size / sizeof(u32);
fw_header = (struct fw_header *) firmware->data;
fw_header = (const struct fw_header *)firmware->data;
load_addr = fore200e->virt_base + le32_to_cpu(fw_header->load_offset);
DPRINTK(2, "device %s firmware being loaded at 0x%p (%d words)\n",

10
drivers/atm/he.c
View File

@ -779,8 +779,9 @@ static int he_init_group(struct he_dev *he_dev, int group)
G0_RBPS_BS + (group * 32));
/* bitmap table */
he_dev->rbpl_table = kmalloc(BITS_TO_LONGS(RBPL_TABLE_SIZE)
* sizeof(unsigned long), GFP_KERNEL);
he_dev->rbpl_table = kmalloc_array(BITS_TO_LONGS(RBPL_TABLE_SIZE),
sizeof(*he_dev->rbpl_table),
GFP_KERNEL);
if (!he_dev->rbpl_table) {
hprintk("unable to allocate rbpl bitmap table\n");
return -ENOMEM;
@ -788,8 +789,9 @@ static int he_init_group(struct he_dev *he_dev, int group)
bitmap_zero(he_dev->rbpl_table, RBPL_TABLE_SIZE);
/* rbpl_virt 64-bit pointers */
he_dev->rbpl_virt = kmalloc(RBPL_TABLE_SIZE
* sizeof(struct he_buff *), GFP_KERNEL);
he_dev->rbpl_virt = kmalloc_array(RBPL_TABLE_SIZE,
sizeof(*he_dev->rbpl_virt),
GFP_KERNEL);
if (!he_dev->rbpl_virt) {
hprintk("unable to allocate rbpl virt table\n");
goto out_free_rbpl_table;

19
drivers/atm/iphase.c
View File

@ -1885,9 +1885,9 @@ static int open_tx(struct atm_vcc *vcc)
if ((ret = ia_cbr_setup (iadev, vcc)) < 0) {
return ret;
}
}
else
printk("iadev: Non UBR, ABR and CBR traffic not supportedn");
} else {
printk("iadev: Non UBR, ABR and CBR traffic not supported\n");
}
iadev->testTable[vcc->vci]->vc_status |= VC_ACTIVE;
IF_EVENT(printk("ia open_tx returning \n");)
@ -1975,7 +1975,9 @@ static int tx_init(struct atm_dev *dev)
buf_desc_ptr++;
tx_pkt_start += iadev->tx_buf_sz;
}
iadev->tx_buf = kmalloc(iadev->num_tx_desc*sizeof(struct cpcs_trailer_desc), GFP_KERNEL);
iadev->tx_buf = kmalloc_array(iadev->num_tx_desc,
sizeof(*iadev->tx_buf),
GFP_KERNEL);
if (!iadev->tx_buf) {
printk(KERN_ERR DEV_LABEL " couldn't get mem\n");
goto err_free_dle;
@ -1995,8 +1997,9 @@ static int tx_init(struct atm_dev *dev)
sizeof(*cpcs),
DMA_TO_DEVICE);
}
iadev->desc_tbl = kmalloc(iadev->num_tx_desc *
sizeof(struct desc_tbl_t), GFP_KERNEL);
iadev->desc_tbl = kmalloc_array(iadev->num_tx_desc,
sizeof(*iadev->desc_tbl),
GFP_KERNEL);
if (!iadev->desc_tbl) {
printk(KERN_ERR DEV_LABEL " couldn't get mem\n");
goto err_free_all_tx_bufs;
@ -2124,7 +2127,9 @@ static int tx_init(struct atm_dev *dev)
memset((caddr_t)(iadev->seg_ram+i), 0, iadev->num_vc*4);
vc = (struct main_vc *)iadev->MAIN_VC_TABLE_ADDR;
evc = (struct ext_vc *)iadev->EXT_VC_TABLE_ADDR;
iadev->testTable = kmalloc(sizeof(long)*iadev->num_vc, GFP_KERNEL);
iadev->testTable = kmalloc_array(iadev->num_vc,
sizeof(*iadev->testTable),
GFP_KERNEL);
if (!iadev->testTable) {
printk("Get freepage failed\n");
goto err_free_desc_tbl;

15
drivers/atm/nicstar.c
View File

@ -370,7 +370,8 @@ static int ns_init_card(int i, struct pci_dev *pcidev)
return error;
}
if ((card = kmalloc(sizeof(ns_dev), GFP_KERNEL)) == NULL) {
card = kmalloc(sizeof(*card), GFP_KERNEL);
if (!card) {
printk
("nicstar%d: can't allocate memory for device structure.\n",
i);
@ -611,7 +612,7 @@ static int ns_init_card(int i, struct pci_dev *pcidev)
for (j = 0; j < card->rct_size; j++)
ns_write_sram(card, j * 4, u32d, 4);
memset(card->vcmap, 0, NS_MAX_RCTSIZE * sizeof(vc_map));
memset(card->vcmap, 0, sizeof(card->vcmap));
for (j = 0; j < NS_FRSCD_NUM; j++)
card->scd2vc[j] = NULL;
@ -862,7 +863,7 @@ static scq_info *get_scq(ns_dev *card, int size, u32 scd)
if (size != VBR_SCQSIZE && size != CBR_SCQSIZE)
return NULL;
scq = kmalloc(sizeof(scq_info), GFP_KERNEL);
scq = kmalloc(sizeof(*scq), GFP_KERNEL);
if (!scq)
return NULL;
scq->org = dma_alloc_coherent(&card->pcidev->dev,
@ -871,8 +872,9 @@ static scq_info *get_scq(ns_dev *card, int size, u32 scd)
kfree(scq);
return NULL;
}
scq->skb = kmalloc(sizeof(struct sk_buff *) *
(size / NS_SCQE_SIZE), GFP_KERNEL);
scq->skb = kmalloc_array(size / NS_SCQE_SIZE,
sizeof(*scq->skb),
GFP_KERNEL);
if (!scq->skb) {
dma_free_coherent(&card->pcidev->dev,
2 * size, scq->org, scq->dma);
@ -2021,7 +2023,8 @@ static void dequeue_rx(ns_dev * card, ns_rsqe * rsqe)
cell = skb->data;
for (i = ns_rsqe_cellcount(rsqe); i; i--) {
if ((sb = dev_alloc_skb(NS_SMSKBSIZE)) == NULL) {
sb = dev_alloc_skb(NS_SMSKBSIZE);
if (!sb) {
printk
("nicstar%d: Can't allocate buffers for aal0.\n",
card->index);

16
drivers/atm/zatm.c
View File

@ -598,12 +598,13 @@ static void close_rx(struct atm_vcc *vcc)
static int start_rx(struct atm_dev *dev)
{
struct zatm_dev *zatm_dev;
int size,i;
int i;
DPRINTK("start_rx\n");
DPRINTK("start_rx\n");
zatm_dev = ZATM_DEV(dev);
size = sizeof(struct atm_vcc *)*zatm_dev->chans;
zatm_dev->rx_map = kzalloc(size,GFP_KERNEL);
zatm_dev->rx_map = kcalloc(zatm_dev->chans,
sizeof(*zatm_dev->rx_map),
GFP_KERNEL);
if (!zatm_dev->rx_map) return -ENOMEM;
/* set VPI/VCI split (use all VCIs and give what's left to VPIs) */
zpokel(zatm_dev,(1 << dev->ci_range.vci_bits)-1,uPD98401_VRR);
@ -998,8 +999,9 @@ static int start_tx(struct atm_dev *dev)
DPRINTK("start_tx\n");
zatm_dev = ZATM_DEV(dev);
zatm_dev->tx_map = kmalloc(sizeof(struct atm_vcc *)*
zatm_dev->chans,GFP_KERNEL);
zatm_dev->tx_map = kmalloc_array(zatm_dev->chans,
sizeof(*zatm_dev->tx_map),
GFP_KERNEL);
if (!zatm_dev->tx_map) return -ENOMEM;
zatm_dev->tx_bw = ATM_OC3_PCR;
zatm_dev->free_shapers = (1 << NR_SHAPERS)-1;
@ -1398,7 +1400,7 @@ static int zatm_open(struct atm_vcc *vcc)
DPRINTK(DEV_LABEL "(itf %d): open %d.%d\n",vcc->dev->number,vcc->vpi,
vcc->vci);
if (!test_bit(ATM_VF_PARTIAL,&vcc->flags)) {
zatm_vcc = kmalloc(sizeof(struct zatm_vcc),GFP_KERNEL);
zatm_vcc = kmalloc(sizeof(*zatm_vcc), GFP_KERNEL);
if (!zatm_vcc) {
clear_bit(ATM_VF_ADDR,&vcc->flags);
return -ENOMEM;

32
drivers/bcma/driver_chipcommon.c
View File

@ -36,12 +36,31 @@ u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
}
EXPORT_SYMBOL_GPL(bcma_chipco_get_alp_clock);
static bool bcma_core_cc_has_pmu_watchdog(struct bcma_drv_cc *cc)
{
struct bcma_bus *bus = cc->core->bus;
if (cc->capabilities & BCMA_CC_CAP_PMU) {
if (bus->chipinfo.id == BCMA_CHIP_ID_BCM53573) {
WARN(bus->chipinfo.rev <= 1, "No watchdog available\n");
/* 53573B0 and 53573B1 have bugged PMU watchdog. It can
* be enabled but timer can't be bumped. Use CC one
* instead.
*/
return false;
}
return true;
} else {
return false;
}
}
static u32 bcma_chipco_watchdog_get_max_timer(struct bcma_drv_cc *cc)
{
struct bcma_bus *bus = cc->core->bus;
u32 nb;
if (cc->capabilities & BCMA_CC_CAP_PMU) {
if (bcma_core_cc_has_pmu_watchdog(cc)) {
if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706)
nb = 32;
else if (cc->core->id.rev < 26)
@ -95,9 +114,16 @@ static int bcma_chipco_watchdog_ticks_per_ms(struct bcma_drv_cc *cc)
int bcma_chipco_watchdog_register(struct bcma_drv_cc *cc)
{
struct bcma_bus *bus = cc->core->bus;
struct bcm47xx_wdt wdt = {};
struct platform_device *pdev;
if (bus->chipinfo.id == BCMA_CHIP_ID_BCM53573 &&
bus->chipinfo.rev <= 1) {
pr_debug("No watchdog on 53573A0 / 53573A1\n");
return 0;
}
wdt.driver_data = cc;
wdt.timer_set = bcma_chipco_watchdog_timer_set_wdt;
wdt.timer_set_ms = bcma_chipco_watchdog_timer_set_ms_wdt;
@ -105,7 +131,7 @@ int bcma_chipco_watchdog_register(struct bcma_drv_cc *cc)
bcma_chipco_watchdog_get_max_timer(cc) / cc->ticks_per_ms;
pdev = platform_device_register_data(NULL, "bcm47xx-wdt",
cc->core->bus->num, &wdt,
bus->num, &wdt,
sizeof(wdt));
if (IS_ERR(pdev))
return PTR_ERR(pdev);
@ -217,7 +243,7 @@ u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks)
u32 maxt;
maxt = bcma_chipco_watchdog_get_max_timer(cc);
if (cc->capabilities & BCMA_CC_CAP_PMU) {
if (bcma_core_cc_has_pmu_watchdog(cc)) {
if (ticks == 1)
ticks = 2;
else if (ticks > maxt)

6
drivers/bcma/main.c
View File

@ -209,6 +209,8 @@ static void bcma_of_fill_device(struct platform_device *parent,
core->dev.of_node = node;
core->irq = bcma_of_get_irq(parent, core, 0);
of_dma_configure(&core->dev, node);
}
unsigned int bcma_core_irq(struct bcma_device *core, int num)
@ -248,12 +250,12 @@ void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core)
core->irq = bus->host_pci->irq;
break;
case BCMA_HOSTTYPE_SOC:
core->dev.dma_mask = &core->dev.coherent_dma_mask;
if (bus->host_pdev) {
if (IS_ENABLED(CONFIG_OF) && bus->host_pdev) {
core->dma_dev = &bus->host_pdev->dev;
core->dev.parent = &bus->host_pdev->dev;
bcma_of_fill_device(bus->host_pdev, core);
} else {
core->dev.dma_mask = &core->dev.coherent_dma_mask;
core->dma_dev = &core->dev;
}
break;

23
drivers/bluetooth/Kconfig
View File

@ -180,6 +180,17 @@ config BT_HCIUART_AG6XX
Say Y here to compile support for Intel AG6XX protocol.
config BT_HCIUART_MRVL
bool "Marvell protocol support"
depends on BT_HCIUART
select BT_HCIUART_H4
help
Marvell is serial protocol for communication between Bluetooth
device and host. This protocol is required for most Marvell Bluetooth
devices with UART interface.
Say Y here to compile support for HCI MRVL protocol.
config BT_HCIBCM203X
tristate "HCI BCM203x USB driver"
depends on USB
@ -331,4 +342,16 @@ config BT_WILINK
Say Y here to compile support for Texas Instrument's WiLink7 driver
into the kernel or say M to compile it as module (btwilink).
config BT_QCOMSMD
tristate "Qualcomm SMD based HCI support"
depends on QCOM_SMD && QCOM_WCNSS_CTRL
select BT_QCA
help
Qualcomm SMD based HCI driver.
This driver is used to bridge HCI data onto the shared memory
channels to the WCNSS core.
Say Y here to compile support for HCI over Qualcomm SMD into the
kernel or say M to compile as a module.
endmenu

2
drivers/bluetooth/Makefile
View File

@ -20,6 +20,7 @@ obj-$(CONFIG_BT_ATH3K) += ath3k.o
obj-$(CONFIG_BT_MRVL) += btmrvl.o
obj-$(CONFIG_BT_MRVL_SDIO) += btmrvl_sdio.o
obj-$(CONFIG_BT_WILINK) += btwilink.o
obj-$(CONFIG_BT_QCOMSMD) += btqcomsmd.o
obj-$(CONFIG_BT_BCM) += btbcm.o
obj-$(CONFIG_BT_RTL) += btrtl.o
obj-$(CONFIG_BT_QCA) += btqca.o
@ -37,6 +38,7 @@ hci_uart-$(CONFIG_BT_HCIUART_INTEL) += hci_intel.o
hci_uart-$(CONFIG_BT_HCIUART_BCM) += hci_bcm.o
hci_uart-$(CONFIG_BT_HCIUART_QCA) += hci_qca.o
hci_uart-$(CONFIG_BT_HCIUART_AG6XX) += hci_ag6xx.o
hci_uart-$(CONFIG_BT_HCIUART_MRVL) += hci_mrvl.o
hci_uart-objs := $(hci_uart-y)
ccflags-y += -D__CHECK_ENDIAN__

8
drivers/bluetooth/btqca.c
View File

@ -55,8 +55,8 @@ static int rome_patch_ver_req(struct hci_dev *hdev, u32 *rome_version)
}
edl = (struct edl_event_hdr *)(skb->data);
if (!edl || !edl->data) {
BT_ERR("%s: TLV with no header or no data", hdev->name);
if (!edl) {
BT_ERR("%s: TLV with no header", hdev->name);
err = -EILSEQ;
goto out;
}
@ -224,8 +224,8 @@ static int rome_tlv_send_segment(struct hci_dev *hdev, int idx, int seg_size,
}
edl = (struct edl_event_hdr *)(skb->data);
if (!edl || !edl->data) {
BT_ERR("%s: TLV with no header or no data", hdev->name);
if (!edl) {
BT_ERR("%s: TLV with no header", hdev->name);
err = -EILSEQ;
goto out;
}

182
drivers/bluetooth/btqcomsmd.c Normal file
View File

@ -0,0 +1,182 @@
/*
* Copyright (c) 2016, Linaro Ltd.
* Copyright (c) 2015, Sony Mobile Communications Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/soc/qcom/smd.h>
#include <linux/soc/qcom/wcnss_ctrl.h>
#include <linux/platform_device.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include "btqca.h"
struct btqcomsmd {
struct hci_dev *hdev;
struct qcom_smd_channel *acl_channel;
struct qcom_smd_channel *cmd_channel;
};
static int btqcomsmd_recv(struct hci_dev *hdev, unsigned int type,
const void *data, size_t count)
{
struct sk_buff *skb;
/* Use GFP_ATOMIC as we're in IRQ context */
skb = bt_skb_alloc(count, GFP_ATOMIC);
if (!skb) {
hdev->stat.err_rx++;
return -ENOMEM;
}
hci_skb_pkt_type(skb) = type;
memcpy(skb_put(skb, count), data, count);
return hci_recv_frame(hdev, skb);
}
static int btqcomsmd_acl_callback(struct qcom_smd_channel *channel,
const void *data, size_t count)
{
struct btqcomsmd *btq = qcom_smd_get_drvdata(channel);
btq->hdev->stat.byte_rx += count;
return btqcomsmd_recv(btq->hdev, HCI_ACLDATA_PKT, data, count);
}
static int btqcomsmd_cmd_callback(struct qcom_smd_channel *channel,
const void *data, size_t count)
{
struct btqcomsmd *btq = qcom_smd_get_drvdata(channel);
return btqcomsmd_recv(btq->hdev, HCI_EVENT_PKT, data, count);
}
static int btqcomsmd_send(struct hci_dev *hdev, struct sk_buff *skb)
{
struct btqcomsmd *btq = hci_get_drvdata(hdev);
int ret;
switch (hci_skb_pkt_type(skb)) {
case HCI_ACLDATA_PKT:
ret = qcom_smd_send(btq->acl_channel, skb->data, skb->len);
hdev->stat.acl_tx++;
hdev->stat.byte_tx += skb->len;
break;
case HCI_COMMAND_PKT:
ret = qcom_smd_send(btq->cmd_channel, skb->data, skb->len);
hdev->stat.cmd_tx++;
break;
default:
ret = -EILSEQ;
break;
}
kfree_skb(skb);
return ret;
}
static int btqcomsmd_open(struct hci_dev *hdev)
{
return 0;
}
static int btqcomsmd_close(struct hci_dev *hdev)
{
return 0;
}
static int btqcomsmd_probe(struct platform_device *pdev)
{
struct btqcomsmd *btq;
struct hci_dev *hdev;
void *wcnss;
int ret;
btq = devm_kzalloc(&pdev->dev, sizeof(*btq), GFP_KERNEL);
if (!btq)
return -ENOMEM;
wcnss = dev_get_drvdata(pdev->dev.parent);
btq->acl_channel = qcom_wcnss_open_channel(wcnss, "APPS_RIVA_BT_ACL",
btqcomsmd_acl_callback);
if (IS_ERR(btq->acl_channel))
return PTR_ERR(btq->acl_channel);
btq->cmd_channel = qcom_wcnss_open_channel(wcnss, "APPS_RIVA_BT_CMD",
btqcomsmd_cmd_callback);
if (IS_ERR(btq->cmd_channel))
return PTR_ERR(btq->cmd_channel);
qcom_smd_set_drvdata(btq->acl_channel, btq);
qcom_smd_set_drvdata(btq->cmd_channel, btq);
hdev = hci_alloc_dev();
if (!hdev)
return -ENOMEM;
hci_set_drvdata(hdev, btq);
btq->hdev = hdev;
SET_HCIDEV_DEV(hdev, &pdev->dev);
hdev->bus = HCI_SMD;
hdev->open = btqcomsmd_open;
hdev->close = btqcomsmd_close;
hdev->send = btqcomsmd_send;
hdev->set_bdaddr = qca_set_bdaddr_rome;
ret = hci_register_dev(hdev);
if (ret < 0) {
hci_free_dev(hdev);
return ret;
}
platform_set_drvdata(pdev, btq);
return 0;
}
static int btqcomsmd_remove(struct platform_device *pdev)
{
struct btqcomsmd *btq = platform_get_drvdata(pdev);
hci_unregister_dev(btq->hdev);
hci_free_dev(btq->hdev);
return 0;
}
static const struct of_device_id btqcomsmd_of_match[] = {
{ .compatible = "qcom,wcnss-bt", },
{ },
};
static struct platform_driver btqcomsmd_driver = {
.probe = btqcomsmd_probe,
.remove = btqcomsmd_remove,
.driver = {
.name = "btqcomsmd",
.of_match_table = btqcomsmd_of_match,
},
};
module_platform_driver(btqcomsmd_driver);
MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@sonymobile.com>");
MODULE_DESCRIPTION("Qualcomm SMD HCI driver");
MODULE_LICENSE("GPL v2");

107
drivers/bluetooth/btrtl.c
View File

@ -33,6 +33,7 @@
#define RTL_ROM_LMP_8723B 0x8723
#define RTL_ROM_LMP_8821A 0x8821
#define RTL_ROM_LMP_8761A 0x8761
#define RTL_ROM_LMP_8822B 0x8822
static int rtl_read_rom_version(struct hci_dev *hdev, u8 *version)
{
@ -78,11 +79,15 @@ static int rtl8723b_parse_firmware(struct hci_dev *hdev, u16 lmp_subver,
const unsigned char *patch_length_base, *patch_offset_base;
u32 patch_offset = 0;
u16 patch_length, num_patches;
const u16 project_id_to_lmp_subver[] = {
RTL_ROM_LMP_8723A,
RTL_ROM_LMP_8723B,
RTL_ROM_LMP_8821A,
RTL_ROM_LMP_8761A
static const struct {
__u16 lmp_subver;
__u8 id;
} project_id_to_lmp_subver[] = {
{ RTL_ROM_LMP_8723A, 0 },
{ RTL_ROM_LMP_8723B, 1 },
{ RTL_ROM_LMP_8821A, 2 },
{ RTL_ROM_LMP_8761A, 3 },
{ RTL_ROM_LMP_8822B, 8 },
};
ret = rtl_read_rom_version(hdev, &rom_version);
@ -134,14 +139,20 @@ static int rtl8723b_parse_firmware(struct hci_dev *hdev, u16 lmp_subver,
return -EINVAL;
}
if (project_id >= ARRAY_SIZE(project_id_to_lmp_subver)) {
/* Find project_id in table */
for (i = 0; i < ARRAY_SIZE(project_id_to_lmp_subver); i++) {
if (project_id == project_id_to_lmp_subver[i].id)
break;
}
if (i >= ARRAY_SIZE(project_id_to_lmp_subver)) {
BT_ERR("%s: unknown project id %d", hdev->name, project_id);
return -EINVAL;
}
if (lmp_subver != project_id_to_lmp_subver[project_id]) {
if (lmp_subver != project_id_to_lmp_subver[i].lmp_subver) {
BT_ERR("%s: firmware is for %x but this is a %x", hdev->name,
project_id_to_lmp_subver[project_id], lmp_subver);
project_id_to_lmp_subver[i].lmp_subver, lmp_subver);
return -EINVAL;
}
@ -257,6 +268,26 @@ out:
return ret;
}
static int rtl_load_config(struct hci_dev *hdev, const char *name, u8 **buff)
{
const struct firmware *fw;
int ret;
BT_INFO("%s: rtl: loading %s", hdev->name, name);
ret = request_firmware(&fw, name, &hdev->dev);
if (ret < 0) {
BT_ERR("%s: Failed to load %s", hdev->name, name);
return ret;
}
ret = fw->size;
*buff = kmemdup(fw->data, ret, GFP_KERNEL);
release_firmware(fw);
return ret;
}
static int btrtl_setup_rtl8723a(struct hci_dev *hdev)
{
const struct firmware *fw;
@ -296,25 +327,74 @@ static int btrtl_setup_rtl8723b(struct hci_dev *hdev, u16 lmp_subver,
unsigned char *fw_data = NULL;
const struct firmware *fw;
int ret;
int cfg_sz;
u8 *cfg_buff = NULL;
u8 *tbuff;
char *cfg_name = NULL;
switch (lmp_subver) {
case RTL_ROM_LMP_8723B:
cfg_name = "rtl_bt/rtl8723b_config.bin";
break;
case RTL_ROM_LMP_8821A:
cfg_name = "rtl_bt/rtl8821a_config.bin";
break;
case RTL_ROM_LMP_8761A:
cfg_name = "rtl_bt/rtl8761a_config.bin";
break;
case RTL_ROM_LMP_8822B:
cfg_name = "rtl_bt/rtl8822b_config.bin";
break;
default:
BT_ERR("%s: rtl: no config according to lmp_subver %04x",
hdev->name, lmp_subver);
break;
}
if (cfg_name) {
cfg_sz = rtl_load_config(hdev, cfg_name, &cfg_buff);
if (cfg_sz < 0)
cfg_sz = 0;
} else
cfg_sz = 0;
BT_INFO("%s: rtl: loading %s", hdev->name, fw_name);
ret = request_firmware(&fw, fw_name, &hdev->dev);
if (ret < 0) {
BT_ERR("%s: Failed to load %s", hdev->name, fw_name);
return ret;
goto err_req_fw;
}
ret = rtl8723b_parse_firmware(hdev, lmp_subver, fw, &fw_data);
if (ret < 0)
goto out;
if (cfg_sz) {
tbuff = kzalloc(ret + cfg_sz, GFP_KERNEL);
if (!tbuff) {
ret = -ENOMEM;
goto out;
}
memcpy(tbuff, fw_data, ret);
kfree(fw_data);
memcpy(tbuff + ret, cfg_buff, cfg_sz);
ret += cfg_sz;
fw_data = tbuff;
}
BT_INFO("cfg_sz %d, total size %d", cfg_sz, ret);
ret = rtl_download_firmware(hdev, fw_data, ret);
kfree(fw_data);
if (ret < 0)
goto out;
out:
release_firmware(fw);
kfree(fw_data);
err_req_fw:
if (cfg_sz)
kfree(cfg_buff);
return ret;
}
@ -377,6 +457,9 @@ int btrtl_setup_realtek(struct hci_dev *hdev)
case RTL_ROM_LMP_8761A:
return btrtl_setup_rtl8723b(hdev, lmp_subver,
"rtl_bt/rtl8761a_fw.bin");
case RTL_ROM_LMP_8822B:
return btrtl_setup_rtl8723b(hdev, lmp_subver,
"rtl_bt/rtl8822b_fw.bin");
default:
BT_INFO("rtl: assuming no firmware upload needed.");
return 0;

14
drivers/bluetooth/btusb.c
View File

@ -62,6 +62,7 @@ static struct usb_driver btusb_driver;
#define BTUSB_REALTEK 0x20000
#define BTUSB_BCM2045 0x40000
#define BTUSB_IFNUM_2 0x80000
#define BTUSB_CW6622 0x100000
static const struct usb_device_id btusb_table[] = {
/* Generic Bluetooth USB device */
@ -248,9 +249,11 @@ static const struct usb_device_id blacklist_table[] = {
/* QCA ROME chipset */
{ USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x0cf3, 0xe009), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x0489, 0xe092), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x04ca, 0x3011), .driver_info = BTUSB_QCA_ROME },
/* Broadcom BCM2035 */
{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
@ -290,7 +293,8 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0400, 0x080a), .driver_info = BTUSB_BROKEN_ISOC },
/* CONWISE Technology based adapters with buggy SCO support */
{ USB_DEVICE(0x0e5e, 0x6622), .driver_info = BTUSB_BROKEN_ISOC },
{ USB_DEVICE(0x0e5e, 0x6622),
.driver_info = BTUSB_BROKEN_ISOC | BTUSB_CW6622},
/* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */
{ USB_DEVICE(0x1310, 0x0001), .driver_info = BTUSB_SWAVE },
@ -2221,9 +2225,8 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
err = wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING,
TASK_INTERRUPTIBLE,
msecs_to_jiffies(5000));
if (err == 1) {
if (err == -EINTR) {
BT_ERR("%s: Firmware loading interrupted", hdev->name);
err = -EINTR;
goto done;
}
@ -2275,7 +2278,7 @@ done:
TASK_INTERRUPTIBLE,
msecs_to_jiffies(1000));
if (err == 1) {
if (err == -EINTR) {
BT_ERR("%s: Device boot interrupted", hdev->name);
return -EINTR;
}
@ -2845,6 +2848,9 @@ static int btusb_probe(struct usb_interface *intf,
hdev->send = btusb_send_frame;
hdev->notify = btusb_notify;
if (id->driver_info & BTUSB_CW6622)
set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
if (id->driver_info & BTUSB_BCM2045)
set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);

4
drivers/bluetooth/btwilink.c
View File

@ -245,6 +245,7 @@ static int ti_st_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
{
struct ti_st *hst;
long len;
int pkt_type;
hst = hci_get_drvdata(hdev);
@ -258,6 +259,7 @@ static int ti_st_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
* Freeing skb memory is taken care in shared transport layer,
* so don't free skb memory here.
*/
pkt_type = hci_skb_pkt_type(skb);
len = hst->st_write(skb);
if (len < 0) {
kfree_skb(skb);
@ -268,7 +270,7 @@ static int ti_st_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
/* ST accepted our skb. So, Go ahead and do rest */
hdev->stat.byte_tx += len;
ti_st_tx_complete(hst, hci_skb_pkt_type(skb));
ti_st_tx_complete(hst, pkt_type);
return 0;
}

2
drivers/bluetooth/hci_bcm.c
View File

@ -798,7 +798,7 @@ static int bcm_remove(struct platform_device *pdev)
static const struct hci_uart_proto bcm_proto = {
.id = HCI_UART_BCM,
.name = "BCM",
.name = "Broadcom",
.manufacturer = 15,
.init_speed = 115200,
.oper_speed = 4000000,

126
drivers/bluetooth/hci_bcsp.c
View File

@ -90,7 +90,8 @@ struct bcsp_struct {
/* ---- BCSP CRC calculation ---- */
/* Table for calculating CRC for polynomial 0x1021, LSB processed first,
initial value 0xffff, bits shifted in reverse order. */
* initial value 0xffff, bits shifted in reverse order.
*/
static const u16 crc_table[] = {
0x0000, 0x1081, 0x2102, 0x3183,
@ -174,7 +175,7 @@ static int bcsp_enqueue(struct hci_uart *hu, struct sk_buff *skb)
}
static struct sk_buff *bcsp_prepare_pkt(struct bcsp_struct *bcsp, u8 *data,
int len, int pkt_type)
int len, int pkt_type)
{
struct sk_buff *nskb;
u8 hdr[4], chan;
@ -213,6 +214,7 @@ static struct sk_buff *bcsp_prepare_pkt(struct bcsp_struct *bcsp, u8 *data,
/* Vendor specific commands */
if (hci_opcode_ogf(__le16_to_cpu(opcode)) == 0x3f) {
u8 desc = *(data + HCI_COMMAND_HDR_SIZE);
if ((desc & 0xf0) == 0xc0) {
data += HCI_COMMAND_HDR_SIZE + 1;
len -= HCI_COMMAND_HDR_SIZE + 1;
@ -271,8 +273,8 @@ static struct sk_buff *bcsp_prepare_pkt(struct bcsp_struct *bcsp, u8 *data,
/* Put CRC */
if (bcsp->use_crc) {
bcsp_txmsg_crc = bitrev16(bcsp_txmsg_crc);
bcsp_slip_one_byte(nskb, (u8) ((bcsp_txmsg_crc >> 8) & 0x00ff));
bcsp_slip_one_byte(nskb, (u8) (bcsp_txmsg_crc & 0x00ff));
bcsp_slip_one_byte(nskb, (u8)((bcsp_txmsg_crc >> 8) & 0x00ff));
bcsp_slip_one_byte(nskb, (u8)(bcsp_txmsg_crc & 0x00ff));
}
bcsp_slip_msgdelim(nskb);
@ -287,7 +289,8 @@ static struct sk_buff *bcsp_dequeue(struct hci_uart *hu)
struct sk_buff *skb;
/* First of all, check for unreliable messages in the queue,
since they have priority */
* since they have priority
*/
skb = skb_dequeue(&bcsp->unrel);
if (skb != NULL) {
@ -414,7 +417,7 @@ static void bcsp_handle_le_pkt(struct hci_uart *hu)
/* spot "conf" pkts and reply with a "conf rsp" pkt */
if (bcsp->rx_skb->data[1] >> 4 == 4 && bcsp->rx_skb->data[2] == 0 &&
!memcmp(&bcsp->rx_skb->data[4], conf_pkt, 4)) {
!memcmp(&bcsp->rx_skb->data[4], conf_pkt, 4)) {
struct sk_buff *nskb = alloc_skb(4, GFP_ATOMIC);
BT_DBG("Found a LE conf pkt");
@ -428,7 +431,7 @@ static void bcsp_handle_le_pkt(struct hci_uart *hu)
}
/* Spot "sync" pkts. If we find one...disaster! */
else if (bcsp->rx_skb->data[1] >> 4 == 4 && bcsp->rx_skb->data[2] == 0 &&
!memcmp(&bcsp->rx_skb->data[4], sync_pkt, 4)) {
!memcmp(&bcsp->rx_skb->data[4], sync_pkt, 4)) {
BT_ERR("Found a LE sync pkt, card has reset");
}
}
@ -446,7 +449,7 @@ static inline void bcsp_unslip_one_byte(struct bcsp_struct *bcsp, unsigned char
default:
memcpy(skb_put(bcsp->rx_skb, 1), &byte, 1);
if ((bcsp->rx_skb->data[0] & 0x40) != 0 &&
bcsp->rx_state != BCSP_W4_CRC)
bcsp->rx_state != BCSP_W4_CRC)
bcsp_crc_update(&bcsp->message_crc, byte);
bcsp->rx_count--;
}
@ -457,7 +460,7 @@ static inline void bcsp_unslip_one_byte(struct bcsp_struct *bcsp, unsigned char
case 0xdc:
memcpy(skb_put(bcsp->rx_skb, 1), &c0, 1);
if ((bcsp->rx_skb->data[0] & 0x40) != 0 &&
bcsp->rx_state != BCSP_W4_CRC)
bcsp->rx_state != BCSP_W4_CRC)
bcsp_crc_update(&bcsp->message_crc, 0xc0);
bcsp->rx_esc_state = BCSP_ESCSTATE_NOESC;
bcsp->rx_count--;
@ -466,7 +469,7 @@ static inline void bcsp_unslip_one_byte(struct bcsp_struct *bcsp, unsigned char
case 0xdd:
memcpy(skb_put(bcsp->rx_skb, 1), &db, 1);
if ((bcsp->rx_skb->data[0] & 0x40) != 0 &&
bcsp->rx_state != BCSP_W4_CRC)
bcsp->rx_state != BCSP_W4_CRC)
bcsp_crc_update(&bcsp->message_crc, 0xdb);
bcsp->rx_esc_state = BCSP_ESCSTATE_NOESC;
bcsp->rx_count--;
@ -485,13 +488,28 @@ static inline void bcsp_unslip_one_byte(struct bcsp_struct *bcsp, unsigned char
static void bcsp_complete_rx_pkt(struct hci_uart *hu)
{
struct bcsp_struct *bcsp = hu->priv;
int pass_up;
int pass_up = 0;
if (bcsp->rx_skb->data[0] & 0x80) { /* reliable pkt */
BT_DBG("Received seqno %u from card", bcsp->rxseq_txack);
bcsp->rxseq_txack++;
bcsp->rxseq_txack %= 0x8;
bcsp->txack_req = 1;
/* check the rx sequence number is as expected */
if ((bcsp->rx_skb->data[0] & 0x07) == bcsp->rxseq_txack) {
bcsp->rxseq_txack++;
bcsp->rxseq_txack %= 0x8;
} else {
/* handle re-transmitted packet or
* when packet was missed
*/
BT_ERR("Out-of-order packet arrived, got %u expected %u",
bcsp->rx_skb->data[0] & 0x07, bcsp->rxseq_txack);
/* do not process out-of-order packet payload */
pass_up = 2;
}
/* send current txack value to all received reliable packets */
bcsp->txack_req = 1;
/* If needed, transmit an ack pkt */
hci_uart_tx_wakeup(hu);
@ -500,26 +518,33 @@ static void bcsp_complete_rx_pkt(struct hci_uart *hu)
bcsp->rxack = (bcsp->rx_skb->data[0] >> 3) & 0x07;
BT_DBG("Request for pkt %u from card", bcsp->rxack);
/* handle received ACK indications,
* including those from out-of-order packets
*/
bcsp_pkt_cull(bcsp);
if ((bcsp->rx_skb->data[1] & 0x0f) == 6 &&
bcsp->rx_skb->data[0] & 0x80) {
hci_skb_pkt_type(bcsp->rx_skb) = HCI_ACLDATA_PKT;
pass_up = 1;
} else if ((bcsp->rx_skb->data[1] & 0x0f) == 5 &&
bcsp->rx_skb->data[0] & 0x80) {
hci_skb_pkt_type(bcsp->rx_skb) = HCI_EVENT_PKT;
pass_up = 1;
} else if ((bcsp->rx_skb->data[1] & 0x0f) == 7) {
hci_skb_pkt_type(bcsp->rx_skb) = HCI_SCODATA_PKT;
pass_up = 1;
} else if ((bcsp->rx_skb->data[1] & 0x0f) == 1 &&
!(bcsp->rx_skb->data[0] & 0x80)) {
bcsp_handle_le_pkt(hu);
pass_up = 0;
} else
pass_up = 0;
if (!pass_up) {
if (pass_up != 2) {
if ((bcsp->rx_skb->data[1] & 0x0f) == 6 &&
(bcsp->rx_skb->data[0] & 0x80)) {
hci_skb_pkt_type(bcsp->rx_skb) = HCI_ACLDATA_PKT;
pass_up = 1;
} else if ((bcsp->rx_skb->data[1] & 0x0f) == 5 &&
(bcsp->rx_skb->data[0] & 0x80)) {
hci_skb_pkt_type(bcsp->rx_skb) = HCI_EVENT_PKT;
pass_up = 1;
} else if ((bcsp->rx_skb->data[1] & 0x0f) == 7) {
hci_skb_pkt_type(bcsp->rx_skb) = HCI_SCODATA_PKT;
pass_up = 1;
} else if ((bcsp->rx_skb->data[1] & 0x0f) == 1 &&
!(bcsp->rx_skb->data[0] & 0x80)) {
bcsp_handle_le_pkt(hu);
pass_up = 0;
} else {
pass_up = 0;
}
}
if (pass_up == 0) {
struct hci_event_hdr hdr;
u8 desc = (bcsp->rx_skb->data[1] & 0x0f);
@ -537,18 +562,23 @@ static void bcsp_complete_rx_pkt(struct hci_uart *hu)
hci_recv_frame(hu->hdev, bcsp->rx_skb);
} else {
BT_ERR("Packet for unknown channel (%u %s)",
bcsp->rx_skb->data[1] & 0x0f,
bcsp->rx_skb->data[0] & 0x80 ?
"reliable" : "unreliable");
bcsp->rx_skb->data[1] & 0x0f,
bcsp->rx_skb->data[0] & 0x80 ?
"reliable" : "unreliable");
kfree_skb(bcsp->rx_skb);
}
} else
kfree_skb(bcsp->rx_skb);
} else {
} else if (pass_up == 1) {
/* Pull out BCSP hdr */
skb_pull(bcsp->rx_skb, 4);
hci_recv_frame(hu->hdev, bcsp->rx_skb);
} else {
/* ignore packet payload of already ACKed re-transmitted
* packets or when a packet was missed in the BCSP window
*/
kfree_skb(bcsp->rx_skb);
}
bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
@ -567,7 +597,7 @@ static int bcsp_recv(struct hci_uart *hu, const void *data, int count)
const unsigned char *ptr;
BT_DBG("hu %p count %d rx_state %d rx_count %ld",
hu, count, bcsp->rx_state, bcsp->rx_count);
hu, count, bcsp->rx_state, bcsp->rx_count);
ptr = data;
while (count) {
@ -586,24 +616,14 @@ static int bcsp_recv(struct hci_uart *hu, const void *data, int count)
switch (bcsp->rx_state) {
case BCSP_W4_BCSP_HDR:
if ((0xff & (u8) ~ (bcsp->rx_skb->data[0] + bcsp->rx_skb->data[1] +
bcsp->rx_skb->data[2])) != bcsp->rx_skb->data[3]) {
if ((0xff & (u8)~(bcsp->rx_skb->data[0] + bcsp->rx_skb->data[1] +
bcsp->rx_skb->data[2])) != bcsp->rx_skb->data[3]) {
BT_ERR("Error in BCSP hdr checksum");
kfree_skb(bcsp->rx_skb);
bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
bcsp->rx_count = 0;
continue;
}
if (bcsp->rx_skb->data[0] & 0x80 /* reliable pkt */
&& (bcsp->rx_skb->data[0] & 0x07) != bcsp->rxseq_txack) {
BT_ERR("Out-of-order packet arrived, got %u expected %u",
bcsp->rx_skb->data[0] & 0x07, bcsp->rxseq_txack);
kfree_skb(bcsp->rx_skb);
bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
bcsp->rx_count = 0;
continue;
}
bcsp->rx_state = BCSP_W4_DATA;
bcsp->rx_count = (bcsp->rx_skb->data[1] >> 4) +
(bcsp->rx_skb->data[2] << 4); /* May be 0 */
@ -620,8 +640,8 @@ static int bcsp_recv(struct hci_uart *hu, const void *data, int count)
case BCSP_W4_CRC:
if (bitrev16(bcsp->message_crc) != bscp_get_crc(bcsp)) {
BT_ERR("Checksum failed: computed %04x received %04x",
bitrev16(bcsp->message_crc),
bscp_get_crc(bcsp));
bitrev16(bcsp->message_crc),
bscp_get_crc(bcsp));
kfree_skb(bcsp->rx_skb);
bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
@ -679,7 +699,7 @@ static int bcsp_recv(struct hci_uart *hu, const void *data, int count)
/* Arrange to retransmit all messages in the relq. */
static void bcsp_timed_event(unsigned long arg)
{
struct hci_uart *hu = (struct hci_uart *) arg;
struct hci_uart *hu = (struct hci_uart *)arg;
struct bcsp_struct *bcsp = hu->priv;
struct sk_buff *skb;
unsigned long flags;
@ -715,7 +735,7 @@ static int bcsp_open(struct hci_uart *hu)
init_timer(&bcsp->tbcsp);
bcsp->tbcsp.function = bcsp_timed_event;
bcsp->tbcsp.data = (u_long) hu;
bcsp->tbcsp.data = (u_long)hu;
bcsp->rx_state = BCSP_W4_PKT_DELIMITER;

6
drivers/bluetooth/hci_intel.c
View File

@ -128,7 +128,7 @@ static int intel_wait_booting(struct hci_uart *hu)
TASK_INTERRUPTIBLE,
msecs_to_jiffies(1000));
if (err == 1) {
if (err == -EINTR) {
bt_dev_err(hu->hdev, "Device boot interrupted");
return -EINTR;
}
@ -151,7 +151,7 @@ static int intel_wait_lpm_transaction(struct hci_uart *hu)
TASK_INTERRUPTIBLE,
msecs_to_jiffies(1000));
if (err == 1) {
if (err == -EINTR) {
bt_dev_err(hu->hdev, "LPM transaction interrupted");
return -EINTR;
}
@ -813,7 +813,7 @@ static int intel_setup(struct hci_uart *hu)
err = wait_on_bit_timeout(&intel->flags, STATE_DOWNLOADING,
TASK_INTERRUPTIBLE,
msecs_to_jiffies(5000));
if (err == 1) {
if (err == -EINTR) {
bt_dev_err(hdev, "Firmware loading interrupted");
err = -EINTR;
goto done;

34
drivers/bluetooth/hci_ldisc.c
View File

@ -697,34 +697,36 @@ static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file *file,
case HCIUARTSETPROTO:
if (!test_and_set_bit(HCI_UART_PROTO_SET, &hu->flags)) {
err = hci_uart_set_proto(hu, arg);
if (err) {
if (err)
clear_bit(HCI_UART_PROTO_SET, &hu->flags);
return err;
}
} else
return -EBUSY;
err = -EBUSY;
break;
case HCIUARTGETPROTO:
if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
return hu->proto->id;
return -EUNATCH;
err = hu->proto->id;
else
err = -EUNATCH;
break;
case HCIUARTGETDEVICE:
if (test_bit(HCI_UART_REGISTERED, &hu->flags))
return hu->hdev->id;
return -EUNATCH;
err = hu->hdev->id;
else
err = -EUNATCH;
break;
case HCIUARTSETFLAGS:
if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
return -EBUSY;
err = hci_uart_set_flags(hu, arg);
if (err)
return err;
err = -EBUSY;
else
err = hci_uart_set_flags(hu, arg);
break;
case HCIUARTGETFLAGS:
return hu->hdev_flags;
err = hu->hdev_flags;
break;
default:
err = n_tty_ioctl_helper(tty, file, cmd, arg);
@ -810,6 +812,9 @@ static int __init hci_uart_init(void)
#ifdef CONFIG_BT_HCIUART_AG6XX
ag6xx_init();
#endif
#ifdef CONFIG_BT_HCIUART_MRVL
mrvl_init();
#endif
return 0;
}
@ -845,6 +850,9 @@ static void __exit hci_uart_exit(void)
#ifdef CONFIG_BT_HCIUART_AG6XX
ag6xx_deinit();
#endif
#ifdef CONFIG_BT_HCIUART_MRVL
mrvl_deinit();
#endif
/* Release tty registration of line discipline */
err = tty_unregister_ldisc(N_HCI);

387
drivers/bluetooth/hci_mrvl.c Normal file
View File

@ -0,0 +1,387 @@
/*
*
* Bluetooth HCI UART driver for marvell devices
*
* Copyright (C) 2016 Marvell International Ltd.
* Copyright (C) 2016 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/skbuff.h>
#include <linux/firmware.h>
#include <linux/module.h>
#include <linux/tty.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include "hci_uart.h"
#define HCI_FW_REQ_PKT 0xA5
#define HCI_CHIP_VER_PKT 0xAA
#define MRVL_ACK 0x5A
#define MRVL_NAK 0xBF
#define MRVL_RAW_DATA 0x1F
enum {
STATE_CHIP_VER_PENDING,
STATE_FW_REQ_PENDING,
};
struct mrvl_data {
struct sk_buff *rx_skb;
struct sk_buff_head txq;
struct sk_buff_head rawq;
unsigned long flags;
unsigned int tx_len;
u8 id, rev;
};
struct hci_mrvl_pkt {
__le16 lhs;
__le16 rhs;
} __packed;
#define HCI_MRVL_PKT_SIZE 4
static int mrvl_open(struct hci_uart *hu)
{
struct mrvl_data *mrvl;
BT_DBG("hu %p", hu);
mrvl = kzalloc(sizeof(*mrvl), GFP_KERNEL);
if (!mrvl)
return -ENOMEM;
skb_queue_head_init(&mrvl->txq);
skb_queue_head_init(&mrvl->rawq);
set_bit(STATE_CHIP_VER_PENDING, &mrvl->flags);
hu->priv = mrvl;
return 0;
}
static int mrvl_close(struct hci_uart *hu)
{
struct mrvl_data *mrvl = hu->priv;
BT_DBG("hu %p", hu);
skb_queue_purge(&mrvl->txq);
skb_queue_purge(&mrvl->rawq);
kfree_skb(mrvl->rx_skb);
kfree(mrvl);
hu->priv = NULL;
return 0;
}
static int mrvl_flush(struct hci_uart *hu)
{
struct mrvl_data *mrvl = hu->priv;
BT_DBG("hu %p", hu);
skb_queue_purge(&mrvl->txq);
skb_queue_purge(&mrvl->rawq);
return 0;
}
static struct sk_buff *mrvl_dequeue(struct hci_uart *hu)
{
struct mrvl_data *mrvl = hu->priv;
struct sk_buff *skb;
skb = skb_dequeue(&mrvl->txq);
if (!skb) {
/* Any raw data ? */
skb = skb_dequeue(&mrvl->rawq);
} else {
/* Prepend skb with frame type */
memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
}
return skb;
}
static int mrvl_enqueue(struct hci_uart *hu, struct sk_buff *skb)
{
struct mrvl_data *mrvl = hu->priv;
skb_queue_tail(&mrvl->txq, skb);
return 0;
}
static void mrvl_send_ack(struct hci_uart *hu, unsigned char type)
{
struct mrvl_data *mrvl = hu->priv;
struct sk_buff *skb;
/* No H4 payload, only 1 byte header */
skb = bt_skb_alloc(0, GFP_ATOMIC);
if (!skb) {
bt_dev_err(hu->hdev, "Unable to alloc ack/nak packet");
return;
}
hci_skb_pkt_type(skb) = type;
skb_queue_tail(&mrvl->txq, skb);
hci_uart_tx_wakeup(hu);
}
static int mrvl_recv_fw_req(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_mrvl_pkt *pkt = (void *)skb->data;
struct hci_uart *hu = hci_get_drvdata(hdev);
struct mrvl_data *mrvl = hu->priv;
int ret = 0;
if ((pkt->lhs ^ pkt->rhs) != 0xffff) {
bt_dev_err(hdev, "Corrupted mrvl header");
mrvl_send_ack(hu, MRVL_NAK);
ret = -EINVAL;
goto done;
}
mrvl_send_ack(hu, MRVL_ACK);
if (!test_bit(STATE_FW_REQ_PENDING, &mrvl->flags)) {
bt_dev_err(hdev, "Received unexpected firmware request");
ret = -EINVAL;
goto done;
}
mrvl->tx_len = le16_to_cpu(pkt->lhs);
clear_bit(STATE_FW_REQ_PENDING, &mrvl->flags);
smp_mb__after_atomic();
wake_up_bit(&mrvl->flags, STATE_FW_REQ_PENDING);
done:
kfree_skb(skb);
return ret;
}
static int mrvl_recv_chip_ver(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_mrvl_pkt *pkt = (void *)skb->data;
struct hci_uart *hu = hci_get_drvdata(hdev);
struct mrvl_data *mrvl = hu->priv;
u16 version = le16_to_cpu(pkt->lhs);
int ret = 0;
if ((pkt->lhs ^ pkt->rhs) != 0xffff) {
bt_dev_err(hdev, "Corrupted mrvl header");
mrvl_send_ack(hu, MRVL_NAK);
ret = -EINVAL;
goto done;
}
mrvl_send_ack(hu, MRVL_ACK);
if (!test_bit(STATE_CHIP_VER_PENDING, &mrvl->flags)) {
bt_dev_err(hdev, "Received unexpected chip version");
goto done;
}
mrvl->id = version;
mrvl->rev = version >> 8;
bt_dev_info(hdev, "Controller id = %x, rev = %x", mrvl->id, mrvl->rev);
clear_bit(STATE_CHIP_VER_PENDING, &mrvl->flags);
smp_mb__after_atomic();
wake_up_bit(&mrvl->flags, STATE_CHIP_VER_PENDING);
done:
kfree_skb(skb);
return ret;
}
#define HCI_RECV_CHIP_VER \
.type = HCI_CHIP_VER_PKT, \
.hlen = HCI_MRVL_PKT_SIZE, \
.loff = 0, \
.lsize = 0, \
.maxlen = HCI_MRVL_PKT_SIZE
#define HCI_RECV_FW_REQ \
.type = HCI_FW_REQ_PKT, \
.hlen = HCI_MRVL_PKT_SIZE, \
.loff = 0, \
.lsize = 0, \
.maxlen = HCI_MRVL_PKT_SIZE
static const struct h4_recv_pkt mrvl_recv_pkts[] = {
{ H4_RECV_ACL, .recv = hci_recv_frame },
{ H4_RECV_SCO, .recv = hci_recv_frame },
{ H4_RECV_EVENT, .recv = hci_recv_frame },
{ HCI_RECV_FW_REQ, .recv = mrvl_recv_fw_req },
{ HCI_RECV_CHIP_VER, .recv = mrvl_recv_chip_ver },
};
static int mrvl_recv(struct hci_uart *hu, const void *data, int count)
{
struct mrvl_data *mrvl = hu->priv;
if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
return -EUNATCH;
mrvl->rx_skb = h4_recv_buf(hu->hdev, mrvl->rx_skb, data, count,
mrvl_recv_pkts,
ARRAY_SIZE(mrvl_recv_pkts));
if (IS_ERR(mrvl->rx_skb)) {
int err = PTR_ERR(mrvl->rx_skb);
bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
mrvl->rx_skb = NULL;
return err;
}
return count;
}
static int mrvl_load_firmware(struct hci_dev *hdev, const char *name)
{
struct hci_uart *hu = hci_get_drvdata(hdev);
struct mrvl_data *mrvl = hu->priv;
const struct firmware *fw = NULL;
const u8 *fw_ptr, *fw_max;
int err;
err = request_firmware(&fw, name, &hdev->dev);
if (err < 0) {
bt_dev_err(hdev, "Failed to load firmware file %s", name);
return err;
}
fw_ptr = fw->data;
fw_max = fw->data + fw->size;
bt_dev_info(hdev, "Loading %s", name);
set_bit(STATE_FW_REQ_PENDING, &mrvl->flags);
while (fw_ptr <= fw_max) {
struct sk_buff *skb;
/* Controller drives the firmware load by sending firmware
* request packets containing the expected fragment size.
*/
err = wait_on_bit_timeout(&mrvl->flags, STATE_FW_REQ_PENDING,
TASK_INTERRUPTIBLE,
msecs_to_jiffies(2000));
if (err == 1) {
bt_dev_err(hdev, "Firmware load interrupted");
err = -EINTR;
break;
} else if (err) {
bt_dev_err(hdev, "Firmware request timeout");
err = -ETIMEDOUT;
break;
}
bt_dev_dbg(hdev, "Firmware request, expecting %d bytes",
mrvl->tx_len);
if (fw_ptr == fw_max) {
/* Controller requests a null size once firmware is
* fully loaded. If controller expects more data, there
* is an issue.
*/
if (!mrvl->tx_len) {
bt_dev_info(hdev, "Firmware loading complete");
} else {
bt_dev_err(hdev, "Firmware loading failure");
err = -EINVAL;
}
break;
}
if (fw_ptr + mrvl->tx_len > fw_max) {
mrvl->tx_len = fw_max - fw_ptr;
bt_dev_dbg(hdev, "Adjusting tx_len to %d",
mrvl->tx_len);
}
skb = bt_skb_alloc(mrvl->tx_len, GFP_KERNEL);
if (!skb) {
bt_dev_err(hdev, "Failed to alloc mem for FW packet");
err = -ENOMEM;
break;
}
bt_cb(skb)->pkt_type = MRVL_RAW_DATA;
memcpy(skb_put(skb, mrvl->tx_len), fw_ptr, mrvl->tx_len);
fw_ptr += mrvl->tx_len;
set_bit(STATE_FW_REQ_PENDING, &mrvl->flags);
skb_queue_tail(&mrvl->rawq, skb);
hci_uart_tx_wakeup(hu);
}
release_firmware(fw);
return err;
}
static int mrvl_setup(struct hci_uart *hu)
{
int err;
hci_uart_set_flow_control(hu, true);
err = mrvl_load_firmware(hu->hdev, "mrvl/helper_uart_3000000.bin");
if (err) {
bt_dev_err(hu->hdev, "Unable to download firmware helper");
return -EINVAL;
}
hci_uart_set_baudrate(hu, 3000000);
hci_uart_set_flow_control(hu, false);
err = mrvl_load_firmware(hu->hdev, "mrvl/uart8897_bt.bin");
if (err)
return err;
return 0;
}
static const struct hci_uart_proto mrvl_proto = {
.id = HCI_UART_MRVL,
.name = "Marvell",
.init_speed = 115200,
.open = mrvl_open,
.close = mrvl_close,
.flush = mrvl_flush,
.setup = mrvl_setup,
.recv = mrvl_recv,
.enqueue = mrvl_enqueue,
.dequeue = mrvl_dequeue,
};
int __init mrvl_init(void)
{
return hci_uart_register_proto(&mrvl_proto);
}
int __exit mrvl_deinit(void)
{
return hci_uart_unregister_proto(&mrvl_proto);
}

2
drivers/bluetooth/hci_qca.c
View File

@ -397,7 +397,7 @@ static int qca_open(struct hci_uart *hu)
skb_queue_head_init(&qca->txq);
skb_queue_head_init(&qca->tx_wait_q);
spin_lock_init(&qca->hci_ibs_lock);
qca->workqueue = create_singlethread_workqueue("qca_wq");
qca->workqueue = alloc_ordered_workqueue("qca_wq", 0);
if (!qca->workqueue) {
BT_ERR("QCA Workqueue not initialized properly");
kfree(qca);

9
drivers/bluetooth/hci_uart.h
View File

@ -35,7 +35,7 @@
#define HCIUARTGETFLAGS _IOR('U', 204, int)
/* UART protocols */
#define HCI_UART_MAX_PROTO 10
#define HCI_UART_MAX_PROTO 12
#define HCI_UART_H4 0
#define HCI_UART_BCSP 1
@ -47,6 +47,8 @@
#define HCI_UART_BCM 7
#define HCI_UART_QCA 8
#define HCI_UART_AG6XX 9
#define HCI_UART_NOKIA 10
#define HCI_UART_MRVL 11
#define HCI_UART_RAW_DEVICE 0
#define HCI_UART_RESET_ON_INIT 1
@ -189,3 +191,8 @@ int qca_deinit(void);
int ag6xx_init(void);
int ag6xx_deinit(void);
#endif
#ifdef CONFIG_BT_HCIUART_MRVL
int mrvl_init(void);
int mrvl_deinit(void);
#endif

2
drivers/crypto/Kconfig
View File

@ -550,4 +550,6 @@ config CRYPTO_DEV_ROCKCHIP
This driver interfaces with the hardware crypto accelerator.
Supporting cbc/ecb chainmode, and aes/des/des3_ede cipher mode.
source "drivers/crypto/chelsio/Kconfig"
endif # CRYPTO_HW

1
drivers/crypto/Makefile
View File

@ -31,3 +31,4 @@ obj-$(CONFIG_CRYPTO_DEV_QCE) += qce/
obj-$(CONFIG_CRYPTO_DEV_VMX) += vmx/
obj-$(CONFIG_CRYPTO_DEV_SUN4I_SS) += sunxi-ss/
obj-$(CONFIG_CRYPTO_DEV_ROCKCHIP) += rockchip/
obj-$(CONFIG_CRYPTO_DEV_CHELSIO) += chelsio/

19
drivers/crypto/chelsio/Kconfig Normal file
View File

@ -0,0 +1,19 @@
config CRYPTO_DEV_CHELSIO
tristate "Chelsio Crypto Co-processor Driver"
depends on CHELSIO_T4
select CRYPTO_SHA1
select CRYPTO_SHA256
select CRYPTO_SHA512
---help---
The Chelsio Crypto Co-processor driver for T6 adapters.
For general information about Chelsio and our products, visit
our website at <http://www.chelsio.com>.
For customer support, please visit our customer support page at
<http://www.chelsio.com/support.html>.
Please send feedback to <linux-bugs@chelsio.com>.
To compile this driver as a module, choose M here: the module
will be called chcr.

4
drivers/crypto/chelsio/Makefile Normal file
View File

@ -0,0 +1,4 @@
ccflags-y := -Idrivers/net/ethernet/chelsio/cxgb4
obj-$(CONFIG_CRYPTO_DEV_CHELSIO) += chcr.o
chcr-objs := chcr_core.o chcr_algo.o

1525
drivers/crypto/chelsio/chcr_algo.c Normal file
View File

File diff suppressed because it is too large Load Diff

471
drivers/crypto/chelsio/chcr_algo.h Normal file
View File

@ -0,0 +1,471 @@
/*
* This file is part of the Chelsio T6 Crypto driver for Linux.
*
* Copyright (c) 2003-2016 Chelsio Communications, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
*/
#ifndef __CHCR_ALGO_H__
#define __CHCR_ALGO_H__
/* Crypto key context */
#define KEY_CONTEXT_CTX_LEN_S 24
#define KEY_CONTEXT_CTX_LEN_M 0xff
#define KEY_CONTEXT_CTX_LEN_V(x) ((x) << KEY_CONTEXT_CTX_LEN_S)
#define KEY_CONTEXT_CTX_LEN_G(x) \
(((x) >> KEY_CONTEXT_CTX_LEN_S) & KEY_CONTEXT_CTX_LEN_M)
#define KEY_CONTEXT_DUAL_CK_S 12
#define KEY_CONTEXT_DUAL_CK_M 0x1
#define KEY_CONTEXT_DUAL_CK_V(x) ((x) << KEY_CONTEXT_DUAL_CK_S)
#define KEY_CONTEXT_DUAL_CK_G(x) \
(((x) >> KEY_CONTEXT_DUAL_CK_S) & KEY_CONTEXT_DUAL_CK_M)
#define KEY_CONTEXT_DUAL_CK_F KEY_CONTEXT_DUAL_CK_V(1U)
#define KEY_CONTEXT_SALT_PRESENT_S 10
#define KEY_CONTEXT_SALT_PRESENT_M 0x1
#define KEY_CONTEXT_SALT_PRESENT_V(x) ((x) << KEY_CONTEXT_SALT_PRESENT_S)
#define KEY_CONTEXT_SALT_PRESENT_G(x) \
(((x) >> KEY_CONTEXT_SALT_PRESENT_S) & \
KEY_CONTEXT_SALT_PRESENT_M)
#define KEY_CONTEXT_SALT_PRESENT_F KEY_CONTEXT_SALT_PRESENT_V(1U)
#define KEY_CONTEXT_VALID_S 0
#define KEY_CONTEXT_VALID_M 0x1
#define KEY_CONTEXT_VALID_V(x) ((x) << KEY_CONTEXT_VALID_S)
#define KEY_CONTEXT_VALID_G(x) \
(((x) >> KEY_CONTEXT_VALID_S) & \
KEY_CONTEXT_VALID_M)
#define KEY_CONTEXT_VALID_F KEY_CONTEXT_VALID_V(1U)
#define KEY_CONTEXT_CK_SIZE_S 6
#define KEY_CONTEXT_CK_SIZE_M 0xf
#define KEY_CONTEXT_CK_SIZE_V(x) ((x) << KEY_CONTEXT_CK_SIZE_S)
#define KEY_CONTEXT_CK_SIZE_G(x) \
(((x) >> KEY_CONTEXT_CK_SIZE_S) & KEY_CONTEXT_CK_SIZE_M)
#define KEY_CONTEXT_MK_SIZE_S 2
#define KEY_CONTEXT_MK_SIZE_M 0xf
#define KEY_CONTEXT_MK_SIZE_V(x) ((x) << KEY_CONTEXT_MK_SIZE_S)
#define KEY_CONTEXT_MK_SIZE_G(x) \
(((x) >> KEY_CONTEXT_MK_SIZE_S) & KEY_CONTEXT_MK_SIZE_M)
#define KEY_CONTEXT_OPAD_PRESENT_S 11
#define KEY_CONTEXT_OPAD_PRESENT_M 0x1
#define KEY_CONTEXT_OPAD_PRESENT_V(x) ((x) << KEY_CONTEXT_OPAD_PRESENT_S)
#define KEY_CONTEXT_OPAD_PRESENT_G(x) \
(((x) >> KEY_CONTEXT_OPAD_PRESENT_S) & \
KEY_CONTEXT_OPAD_PRESENT_M)
#define KEY_CONTEXT_OPAD_PRESENT_F KEY_CONTEXT_OPAD_PRESENT_V(1U)
#define CHCR_HASH_MAX_DIGEST_SIZE 64
#define CHCR_MAX_SHA_DIGEST_SIZE 64
#define IPSEC_TRUNCATED_ICV_SIZE 12
#define TLS_TRUNCATED_HMAC_SIZE 10
#define CBCMAC_DIGEST_SIZE 16
#define MAX_HASH_NAME 20
#define SHA1_INIT_STATE_5X4B 5
#define SHA256_INIT_STATE_8X4B 8
#define SHA512_INIT_STATE_8X8B 8
#define SHA1_INIT_STATE SHA1_INIT_STATE_5X4B
#define SHA224_INIT_STATE SHA256_INIT_STATE_8X4B
#define SHA256_INIT_STATE SHA256_INIT_STATE_8X4B
#define SHA384_INIT_STATE SHA512_INIT_STATE_8X8B
#define SHA512_INIT_STATE SHA512_INIT_STATE_8X8B
#define DUMMY_BYTES 16
#define IPAD_DATA 0x36363636
#define OPAD_DATA 0x5c5c5c5c
#define TRANSHDR_SIZE(alignedkctx_len)\
(sizeof(struct ulptx_idata) +\
sizeof(struct ulp_txpkt) +\
sizeof(struct fw_crypto_lookaside_wr) +\
sizeof(struct cpl_tx_sec_pdu) +\
(alignedkctx_len))
#define CIPHER_TRANSHDR_SIZE(alignedkctx_len, sge_pairs) \
(TRANSHDR_SIZE(alignedkctx_len) + sge_pairs +\
sizeof(struct cpl_rx_phys_dsgl))
#define HASH_TRANSHDR_SIZE(alignedkctx_len)\
(TRANSHDR_SIZE(alignedkctx_len) + DUMMY_BYTES)
#define SEC_CPL_OFFSET (sizeof(struct fw_crypto_lookaside_wr) + \
sizeof(struct ulp_txpkt) + \
sizeof(struct ulptx_idata))
#define FILL_SEC_CPL_OP_IVINSR(id, len, hldr, ofst) \
htonl( \
CPL_TX_SEC_PDU_OPCODE_V(CPL_TX_SEC_PDU) | \
CPL_TX_SEC_PDU_RXCHID_V((id)) | \
CPL_TX_SEC_PDU_ACKFOLLOWS_V(0) | \
CPL_TX_SEC_PDU_ULPTXLPBK_V(1) | \
CPL_TX_SEC_PDU_CPLLEN_V((len)) | \
CPL_TX_SEC_PDU_PLACEHOLDER_V((hldr)) | \
CPL_TX_SEC_PDU_IVINSRTOFST_V((ofst)))
#define FILL_SEC_CPL_CIPHERSTOP_HI(a_start, a_stop, c_start, c_stop_hi) \
htonl( \
CPL_TX_SEC_PDU_AADSTART_V((a_start)) | \
CPL_TX_SEC_PDU_AADSTOP_V((a_stop)) | \
CPL_TX_SEC_PDU_CIPHERSTART_V((c_start)) | \
CPL_TX_SEC_PDU_CIPHERSTOP_HI_V((c_stop_hi)))
#define FILL_SEC_CPL_AUTHINSERT(c_stop_lo, a_start, a_stop, a_inst) \
htonl( \
CPL_TX_SEC_PDU_CIPHERSTOP_LO_V((c_stop_lo)) | \
CPL_TX_SEC_PDU_AUTHSTART_V((a_start)) | \
CPL_TX_SEC_PDU_AUTHSTOP_V((a_stop)) | \
CPL_TX_SEC_PDU_AUTHINSERT_V((a_inst)))
#define FILL_SEC_CPL_SCMD0_SEQNO(ctrl, seq, cmode, amode, opad, size, nivs) \
htonl( \
SCMD_SEQ_NO_CTRL_V(0) | \
SCMD_STATUS_PRESENT_V(0) | \
SCMD_PROTO_VERSION_V(CHCR_SCMD_PROTO_VERSION_GENERIC) | \
SCMD_ENC_DEC_CTRL_V((ctrl)) | \
SCMD_CIPH_AUTH_SEQ_CTRL_V((seq)) | \
SCMD_CIPH_MODE_V((cmode)) | \
SCMD_AUTH_MODE_V((amode)) | \
SCMD_HMAC_CTRL_V((opad)) | \
SCMD_IV_SIZE_V((size)) | \
SCMD_NUM_IVS_V((nivs)))
#define FILL_SEC_CPL_IVGEN_HDRLEN(last, more, ctx_in, mac, ivdrop, len) htonl( \
SCMD_ENB_DBGID_V(0) | \
SCMD_IV_GEN_CTRL_V(0) | \
SCMD_LAST_FRAG_V((last)) | \
SCMD_MORE_FRAGS_V((more)) | \
SCMD_TLS_COMPPDU_V(0) | \
SCMD_KEY_CTX_INLINE_V((ctx_in)) | \
SCMD_TLS_FRAG_ENABLE_V(0) | \
SCMD_MAC_ONLY_V((mac)) | \
SCMD_AADIVDROP_V((ivdrop)) | \
SCMD_HDR_LEN_V((len)))
#define FILL_KEY_CTX_HDR(ck_size, mk_size, d_ck, opad, ctx_len) \
htonl(KEY_CONTEXT_VALID_V(1) | \
KEY_CONTEXT_CK_SIZE_V((ck_size)) | \
KEY_CONTEXT_MK_SIZE_V(mk_size) | \
KEY_CONTEXT_DUAL_CK_V((d_ck)) | \
KEY_CONTEXT_OPAD_PRESENT_V((opad)) | \
KEY_CONTEXT_SALT_PRESENT_V(1) | \
KEY_CONTEXT_CTX_LEN_V((ctx_len)))
#define FILL_WR_OP_CCTX_SIZE(len, ctx_len) \
htonl( \
FW_CRYPTO_LOOKASIDE_WR_OPCODE_V( \
FW_CRYPTO_LOOKASIDE_WR) | \
FW_CRYPTO_LOOKASIDE_WR_COMPL_V(0) | \
FW_CRYPTO_LOOKASIDE_WR_IMM_LEN_V((len)) | \
FW_CRYPTO_LOOKASIDE_WR_CCTX_LOC_V(1) | \
FW_CRYPTO_LOOKASIDE_WR_CCTX_SIZE_V((ctx_len)))
#define FILL_WR_RX_Q_ID(cid, qid, wr_iv) \
htonl( \
FW_CRYPTO_LOOKASIDE_WR_RX_CHID_V((cid)) | \
FW_CRYPTO_LOOKASIDE_WR_RX_Q_ID_V((qid)) | \
FW_CRYPTO_LOOKASIDE_WR_LCB_V(0) | \
FW_CRYPTO_LOOKASIDE_WR_IV_V((wr_iv)))
#define FILL_ULPTX_CMD_DEST(cid) \
htonl(ULPTX_CMD_V(ULP_TX_PKT) | \
ULP_TXPKT_DEST_V(0) | \
ULP_TXPKT_DATAMODIFY_V(0) | \
ULP_TXPKT_CHANNELID_V((cid)) | \
ULP_TXPKT_RO_V(1) | \
ULP_TXPKT_FID_V(0))
#define KEYCTX_ALIGN_PAD(bs) ({unsigned int _bs = (bs);\
_bs == SHA1_DIGEST_SIZE ? 12 : 0; })
#define FILL_PLD_SIZE_HASH_SIZE(payload_sgl_len, sgl_lengths, total_frags) \
htonl(FW_CRYPTO_LOOKASIDE_WR_PLD_SIZE_V(payload_sgl_len ? \
sgl_lengths[total_frags] : 0) |\
FW_CRYPTO_LOOKASIDE_WR_HASH_SIZE_V(0))
#define FILL_LEN_PKD(calc_tx_flits_ofld, skb) \
htonl(FW_CRYPTO_LOOKASIDE_WR_LEN16_V(DIV_ROUND_UP((\
calc_tx_flits_ofld(skb) * 8), 16)))
#define FILL_CMD_MORE(immdatalen) htonl(ULPTX_CMD_V(ULP_TX_SC_IMM) |\
ULP_TX_SC_MORE_V((immdatalen) ? 0 : 1))
#define MAX_NK 8
#define CRYPTO_MAX_IMM_TX_PKT_LEN 256
struct algo_param {
unsigned int auth_mode;
unsigned int mk_size;
unsigned int result_size;
};
struct hash_wr_param {
unsigned int opad_needed;
unsigned int more;
unsigned int last;
struct algo_param alg_prm;
unsigned int sg_len;
unsigned int bfr_len;
u64 scmd1;
};
enum {
AES_KEYLENGTH_128BIT = 128,
AES_KEYLENGTH_192BIT = 192,
AES_KEYLENGTH_256BIT = 256
};
enum {
KEYLENGTH_3BYTES = 3,
KEYLENGTH_4BYTES = 4,
KEYLENGTH_6BYTES = 6,
KEYLENGTH_8BYTES = 8
};
enum {
NUMBER_OF_ROUNDS_10 = 10,
NUMBER_OF_ROUNDS_12 = 12,
NUMBER_OF_ROUNDS_14 = 14,
};
/*
* CCM defines values of 4, 6, 8, 10, 12, 14, and 16 octets,
* where they indicate the size of the integrity check value (ICV)
*/
enum {
AES_CCM_ICV_4 = 4,
AES_CCM_ICV_6 = 6,
AES_CCM_ICV_8 = 8,
AES_CCM_ICV_10 = 10,
AES_CCM_ICV_12 = 12,
AES_CCM_ICV_14 = 14,
AES_CCM_ICV_16 = 16
};
struct hash_op_params {
unsigned char mk_size;
unsigned char pad_align;
unsigned char auth_mode;
char hash_name[MAX_HASH_NAME];
unsigned short block_size;
unsigned short word_size;
unsigned short ipad_size;
};
struct phys_sge_pairs {
__be16 len[8];
__be64 addr[8];
};
struct phys_sge_parm {
unsigned int nents;
unsigned int obsize;
unsigned short qid;
unsigned char align;
};
struct crypto_result {
struct completion completion;
int err;
};
static const u32 sha1_init[SHA1_DIGEST_SIZE / 4] = {
SHA1_H0, SHA1_H1, SHA1_H2, SHA1_H3, SHA1_H4,
};
static const u32 sha224_init[SHA256_DIGEST_SIZE / 4] = {
SHA224_H0, SHA224_H1, SHA224_H2, SHA224_H3,
SHA224_H4, SHA224_H5, SHA224_H6, SHA224_H7,
};
static const u32 sha256_init[SHA256_DIGEST_SIZE / 4] = {
SHA256_H0, SHA256_H1, SHA256_H2, SHA256_H3,
SHA256_H4, SHA256_H5, SHA256_H6, SHA256_H7,
};
static const u64 sha384_init[SHA512_DIGEST_SIZE / 8] = {
SHA384_H0, SHA384_H1, SHA384_H2, SHA384_H3,
SHA384_H4, SHA384_H5, SHA384_H6, SHA384_H7,
};
static const u64 sha512_init[SHA512_DIGEST_SIZE / 8] = {
SHA512_H0, SHA512_H1, SHA512_H2, SHA512_H3,
SHA512_H4, SHA512_H5, SHA512_H6, SHA512_H7,
};
static inline void copy_hash_init_values(char *key, int digestsize)
{
u8 i;
__be32 *dkey = (__be32 *)key;
u64 *ldkey = (u64 *)key;
__be64 *sha384 = (__be64 *)sha384_init;
__be64 *sha512 = (__be64 *)sha512_init;
switch (digestsize) {
case SHA1_DIGEST_SIZE:
for (i = 0; i < SHA1_INIT_STATE; i++)
dkey[i] = cpu_to_be32(sha1_init[i]);
break;
case SHA224_DIGEST_SIZE:
for (i = 0; i < SHA224_INIT_STATE; i++)
dkey[i] = cpu_to_be32(sha224_init[i]);
break;
case SHA256_DIGEST_SIZE:
for (i = 0; i < SHA256_INIT_STATE; i++)
dkey[i] = cpu_to_be32(sha256_init[i]);
break;
case SHA384_DIGEST_SIZE:
for (i = 0; i < SHA384_INIT_STATE; i++)
ldkey[i] = be64_to_cpu(sha384[i]);
break;
case SHA512_DIGEST_SIZE:
for (i = 0; i < SHA512_INIT_STATE; i++)
ldkey[i] = be64_to_cpu(sha512[i]);
break;
}
}
static const u8 sgl_lengths[20] = {
0, 1, 2, 3, 4, 4, 5, 6, 7, 7, 8, 9, 10, 10, 11, 12, 13, 13, 14, 15
};
/* Number of len fields(8) * size of one addr field */
#define PHYSDSGL_MAX_LEN_SIZE 16
static inline u16 get_space_for_phys_dsgl(unsigned int sgl_entr)
{
/* len field size + addr field size */
return ((sgl_entr >> 3) + ((sgl_entr % 8) ?
1 : 0)) * PHYSDSGL_MAX_LEN_SIZE +
(sgl_entr << 3) + ((sgl_entr % 2 ? 1 : 0) << 3);
}
/* The AES s-transform matrix (s-box). */
static const u8 aes_sbox[256] = {
99, 124, 119, 123, 242, 107, 111, 197, 48, 1, 103, 43, 254, 215,
171, 118, 202, 130, 201, 125, 250, 89, 71, 240, 173, 212, 162, 175,
156, 164, 114, 192, 183, 253, 147, 38, 54, 63, 247, 204, 52, 165,
229, 241, 113, 216, 49, 21, 4, 199, 35, 195, 24, 150, 5, 154, 7,
18, 128, 226, 235, 39, 178, 117, 9, 131, 44, 26, 27, 110, 90,
160, 82, 59, 214, 179, 41, 227, 47, 132, 83, 209, 0, 237, 32,
252, 177, 91, 106, 203, 190, 57, 74, 76, 88, 207, 208, 239, 170,
251, 67, 77, 51, 133, 69, 249, 2, 127, 80, 60, 159, 168, 81,
163, 64, 143, 146, 157, 56, 245, 188, 182, 218, 33, 16, 255, 243,
210, 205, 12, 19, 236, 95, 151, 68, 23, 196, 167, 126, 61, 100,
93, 25, 115, 96, 129, 79, 220, 34, 42, 144, 136, 70, 238, 184,
20, 222, 94, 11, 219, 224, 50, 58, 10, 73, 6, 36, 92, 194,
211, 172, 98, 145, 149, 228, 121, 231, 200, 55, 109, 141, 213, 78,
169, 108, 86, 244, 234, 101, 122, 174, 8, 186, 120, 37, 46, 28, 166,
180, 198, 232, 221, 116, 31, 75, 189, 139, 138, 112, 62, 181, 102,
72, 3, 246, 14, 97, 53, 87, 185, 134, 193, 29, 158, 225, 248,
152, 17, 105, 217, 142, 148, 155, 30, 135, 233, 206, 85, 40, 223,
140, 161, 137, 13, 191, 230, 66, 104, 65, 153, 45, 15, 176, 84,
187, 22
};
static u32 aes_ks_subword(const u32 w)
{
u8 bytes[4];
*(u32 *)(&bytes[0]) = w;
bytes[0] = aes_sbox[bytes[0]];
bytes[1] = aes_sbox[bytes[1]];
bytes[2] = aes_sbox[bytes[2]];
bytes[3] = aes_sbox[bytes[3]];
return *(u32 *)(&bytes[0]);
}
static u32 round_constant[11] = {
0x01000000, 0x02000000, 0x04000000, 0x08000000,
0x10000000, 0x20000000, 0x40000000, 0x80000000,
0x1B000000, 0x36000000, 0x6C000000
};
/* dec_key - OUTPUT - Reverse round key
* key - INPUT - key
* keylength - INPUT - length of the key in number of bits
*/
static inline void get_aes_decrypt_key(unsigned char *dec_key,
const unsigned char *key,
unsigned int keylength)
{
u32 temp;
u32 w_ring[MAX_NK];
int i, j, k = 0;
u8 nr, nk;
switch (keylength) {
case AES_KEYLENGTH_128BIT:
nk = KEYLENGTH_4BYTES;
nr = NUMBER_OF_ROUNDS_10;
break;
case AES_KEYLENGTH_192BIT:
nk = KEYLENGTH_6BYTES;
nr = NUMBER_OF_ROUNDS_12;
break;
case AES_KEYLENGTH_256BIT:
nk = KEYLENGTH_8BYTES;
nr = NUMBER_OF_ROUNDS_14;
break;
default:
return;
}
for (i = 0; i < nk; i++ )
w_ring[i] = be32_to_cpu(*(u32 *)&key[4 * i]);
i = 0;
temp = w_ring[nk - 1];
while(i + nk < (nr + 1) * 4) {
if(!(i % nk)) {
/* RotWord(temp) */
temp = (temp << 8) | (temp >> 24);
temp = aes_ks_subword(temp);
temp ^= round_constant[i / nk];
}
else if (nk == 8 && (i % 4 == 0))
temp = aes_ks_subword(temp);
w_ring[i % nk] ^= temp;
temp = w_ring[i % nk];
i++;
}
for (k = 0, j = i % nk; k < nk; k++) {
*((u32 *)dec_key + k) = htonl(w_ring[j]);
j--;
if(j < 0)
j += nk;
}
}
#endif /* __CHCR_ALGO_H__ */

238
drivers/crypto/chelsio/chcr_core.c Normal file
View File

@ -0,0 +1,238 @@
/**
* This file is part of the Chelsio T4/T5/T6 Ethernet driver for Linux.
*
* Copyright (C) 2011-2016 Chelsio Communications. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation.
*
* Written and Maintained by:
* Manoj Malviya (manojmalviya@chelsio.com)
* Atul Gupta (atul.gupta@chelsio.com)
* Jitendra Lulla (jlulla@chelsio.com)
* Yeshaswi M R Gowda (yeshaswi@chelsio.com)
* Harsh Jain (harsh@chelsio.com)
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/skbuff.h>
#include <crypto/aes.h>
#include <crypto/hash.h>
#include "t4_msg.h"
#include "chcr_core.h"
#include "cxgb4_uld.h"
static LIST_HEAD(uld_ctx_list);
static DEFINE_MUTEX(dev_mutex);
static atomic_t dev_count;
typedef int (*chcr_handler_func)(struct chcr_dev *dev, unsigned char *input);
static int cpl_fw6_pld_handler(struct chcr_dev *dev, unsigned char *input);
static void *chcr_uld_add(const struct cxgb4_lld_info *lld);
static int chcr_uld_state_change(void *handle, enum cxgb4_state state);
static chcr_handler_func work_handlers[NUM_CPL_CMDS] = {
[CPL_FW6_PLD] = cpl_fw6_pld_handler,
};
static struct cxgb4_uld_info chcr_uld_info = {
.name = DRV_MODULE_NAME,
.nrxq = MAX_ULD_QSETS,
.rxq_size = 1024,
.add = chcr_uld_add,
.state_change = chcr_uld_state_change,
.rx_handler = chcr_uld_rx_handler,
};
int assign_chcr_device(struct chcr_dev **dev)
{
struct uld_ctx *u_ctx;
/*
* Which device to use if multiple devices are available TODO
* May be select the device based on round robin. One session
* must go to the same device to maintain the ordering.
*/
mutex_lock(&dev_mutex); /* TODO ? */
u_ctx = list_first_entry(&uld_ctx_list, struct uld_ctx, entry);
if (!u_ctx) {
mutex_unlock(&dev_mutex);
return -ENXIO;
}
*dev = u_ctx->dev;
mutex_unlock(&dev_mutex);
return 0;
}
static int chcr_dev_add(struct uld_ctx *u_ctx)
{
struct chcr_dev *dev;
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return -ENXIO;
spin_lock_init(&dev->lock_chcr_dev);
u_ctx->dev = dev;
dev->u_ctx = u_ctx;
atomic_inc(&dev_count);
return 0;
}
static int chcr_dev_remove(struct uld_ctx *u_ctx)
{
kfree(u_ctx->dev);
u_ctx->dev = NULL;
atomic_dec(&dev_count);
return 0;
}
static int cpl_fw6_pld_handler(struct chcr_dev *dev,
unsigned char *input)
{
struct crypto_async_request *req;
struct cpl_fw6_pld *fw6_pld;
u32 ack_err_status = 0;
int error_status = 0;
fw6_pld = (struct cpl_fw6_pld *)input;
req = (struct crypto_async_request *)(uintptr_t)be64_to_cpu(
fw6_pld->data[1]);
ack_err_status =
ntohl(*(__be32 *)((unsigned char *)&fw6_pld->data[0] + 4));
if (ack_err_status) {
if (CHK_MAC_ERR_BIT(ack_err_status) ||
CHK_PAD_ERR_BIT(ack_err_status))
error_status = -EINVAL;
}
/* call completion callback with failure status */
if (req) {
if (!chcr_handle_resp(req, input, error_status))
req->complete(req, error_status);
else
return -EINVAL;
} else {
pr_err("Incorrect request address from the firmware\n");
return -EFAULT;
}
return 0;
}
int chcr_send_wr(struct sk_buff *skb)
{
return cxgb4_ofld_send(skb->dev, skb);
}
static void *chcr_uld_add(const struct cxgb4_lld_info *lld)
{
struct uld_ctx *u_ctx;
/* Create the device and add it in the device list */
u_ctx = kzalloc(sizeof(*u_ctx), GFP_KERNEL);
if (!u_ctx) {
u_ctx = ERR_PTR(-ENOMEM);
goto out;
}
u_ctx->lldi = *lld;
mutex_lock(&dev_mutex);
list_add_tail(&u_ctx->entry, &uld_ctx_list);
mutex_unlock(&dev_mutex);
out:
return u_ctx;
}
int chcr_uld_rx_handler(void *handle, const __be64 *rsp,
const struct pkt_gl *pgl)
{
struct uld_ctx *u_ctx = (struct uld_ctx *)handle;
struct chcr_dev *dev = u_ctx->dev;
const struct cpl_act_establish *rpl = (struct cpl_act_establish
*)rsp;
if (rpl->ot.opcode != CPL_FW6_PLD) {
pr_err("Unsupported opcode\n");
return 0;
}
if (!pgl)
work_handlers[rpl->ot.opcode](dev, (unsigned char *)&rsp[1]);
else
work_handlers[rpl->ot.opcode](dev, pgl->va);
return 0;
}
static int chcr_uld_state_change(void *handle, enum cxgb4_state state)
{
struct uld_ctx *u_ctx = handle;
int ret = 0;
switch (state) {
case CXGB4_STATE_UP:
if (!u_ctx->dev) {
ret = chcr_dev_add(u_ctx);
if (ret != 0)
return ret;
}
if (atomic_read(&dev_count) == 1)
ret = start_crypto();
break;
case CXGB4_STATE_DETACH:
if (u_ctx->dev) {
mutex_lock(&dev_mutex);
chcr_dev_remove(u_ctx);
mutex_unlock(&dev_mutex);
}
if (!atomic_read(&dev_count))
stop_crypto();
break;
case CXGB4_STATE_START_RECOVERY:
case CXGB4_STATE_DOWN:
default:
break;
}
return ret;
}
static int __init chcr_crypto_init(void)
{
if (cxgb4_register_uld(CXGB4_ULD_CRYPTO, &chcr_uld_info)) {
pr_err("ULD register fail: No chcr crypto support in cxgb4");
return -1;
}
return 0;
}
static void __exit chcr_crypto_exit(void)
{
struct uld_ctx *u_ctx, *tmp;
if (atomic_read(&dev_count))
stop_crypto();
/* Remove all devices from list */
mutex_lock(&dev_mutex);
list_for_each_entry_safe(u_ctx, tmp, &uld_ctx_list, entry) {
if (u_ctx->dev)
chcr_dev_remove(u_ctx);
kfree(u_ctx);
}
mutex_unlock(&dev_mutex);
cxgb4_unregister_uld(CXGB4_ULD_CRYPTO);
}
module_init(chcr_crypto_init);
module_exit(chcr_crypto_exit);
MODULE_DESCRIPTION("Crypto Co-processor for Chelsio Terminator cards.");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Chelsio Communications");
MODULE_VERSION(DRV_VERSION);

80
drivers/crypto/chelsio/chcr_core.h Normal file
View File

@ -0,0 +1,80 @@
/*
* This file is part of the Chelsio T6 Crypto driver for Linux.
*
* Copyright (c) 2003-2016 Chelsio Communications, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
*/
#ifndef __CHCR_CORE_H__
#define __CHCR_CORE_H__
#include <crypto/algapi.h>
#include "t4_hw.h"
#include "cxgb4.h"
#include "cxgb4_uld.h"
#define DRV_MODULE_NAME "chcr"
#define DRV_VERSION "1.0.0.0"
#define MAX_PENDING_REQ_TO_HW 20
#define CHCR_TEST_RESPONSE_TIMEOUT 1000
#define PAD_ERROR_BIT 1
#define CHK_PAD_ERR_BIT(x) (((x) >> PAD_ERROR_BIT) & 1)
#define MAC_ERROR_BIT 0
#define CHK_MAC_ERR_BIT(x) (((x) >> MAC_ERROR_BIT) & 1)
struct uld_ctx;
struct chcr_dev {
/* Request submited to h/w and waiting for response. */
spinlock_t lock_chcr_dev;
struct crypto_queue pending_queue;
struct uld_ctx *u_ctx;
unsigned char tx_channel_id;
};
struct uld_ctx {
struct list_head entry;
struct cxgb4_lld_info lldi;
struct chcr_dev *dev;
};
int assign_chcr_device(struct chcr_dev **dev);
int chcr_send_wr(struct sk_buff *skb);
int start_crypto(void);
int stop_crypto(void);
int chcr_uld_rx_handler(void *handle, const __be64 *rsp,
const struct pkt_gl *pgl);
int chcr_handle_resp(struct crypto_async_request *req, unsigned char *input,
int err);
#endif /* __CHCR_CORE_H__ */

203
drivers/crypto/chelsio/chcr_crypto.h Normal file
View File

@ -0,0 +1,203 @@
/*
* This file is part of the Chelsio T6 Crypto driver for Linux.
*
* Copyright (c) 2003-2016 Chelsio Communications, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
*/
#ifndef __CHCR_CRYPTO_H__
#define __CHCR_CRYPTO_H__
/* Define following if h/w is not dropping the AAD and IV data before
* giving the processed data
*/
#define CHCR_CRA_PRIORITY 300
#define CHCR_AES_MAX_KEY_LEN (2 * (AES_MAX_KEY_SIZE)) /* consider xts */
#define CHCR_MAX_CRYPTO_IV_LEN 16 /* AES IV len */
#define CHCR_MAX_AUTHENC_AES_KEY_LEN 32 /* max aes key length*/
#define CHCR_MAX_AUTHENC_SHA_KEY_LEN 128 /* max sha key length*/
#define CHCR_GIVENCRYPT_OP 2
/* CPL/SCMD parameters */
#define CHCR_ENCRYPT_OP 0
#define CHCR_DECRYPT_OP 1
#define CHCR_SCMD_SEQ_NO_CTRL_32BIT 1
#define CHCR_SCMD_SEQ_NO_CTRL_48BIT 2
#define CHCR_SCMD_SEQ_NO_CTRL_64BIT 3
#define CHCR_SCMD_PROTO_VERSION_GENERIC 4
#define CHCR_SCMD_AUTH_CTRL_AUTH_CIPHER 0
#define CHCR_SCMD_AUTH_CTRL_CIPHER_AUTH 1
#define CHCR_SCMD_CIPHER_MODE_NOP 0
#define CHCR_SCMD_CIPHER_MODE_AES_CBC 1
#define CHCR_SCMD_CIPHER_MODE_GENERIC_AES 4
#define CHCR_SCMD_CIPHER_MODE_AES_XTS 6
#define CHCR_SCMD_AUTH_MODE_NOP 0
#define CHCR_SCMD_AUTH_MODE_SHA1 1
#define CHCR_SCMD_AUTH_MODE_SHA224 2
#define CHCR_SCMD_AUTH_MODE_SHA256 3
#define CHCR_SCMD_AUTH_MODE_SHA512_224 5
#define CHCR_SCMD_AUTH_MODE_SHA512_256 6
#define CHCR_SCMD_AUTH_MODE_SHA512_384 7
#define CHCR_SCMD_AUTH_MODE_SHA512_512 8
#define CHCR_SCMD_HMAC_CTRL_NOP 0
#define CHCR_SCMD_HMAC_CTRL_NO_TRUNC 1
#define CHCR_SCMD_IVGEN_CTRL_HW 0
#define CHCR_SCMD_IVGEN_CTRL_SW 1
/* This are not really mac key size. They are intermediate values
* of sha engine and its size
*/
#define CHCR_KEYCTX_MAC_KEY_SIZE_128 0
#define CHCR_KEYCTX_MAC_KEY_SIZE_160 1
#define CHCR_KEYCTX_MAC_KEY_SIZE_192 2
#define CHCR_KEYCTX_MAC_KEY_SIZE_256 3
#define CHCR_KEYCTX_MAC_KEY_SIZE_512 4
#define CHCR_KEYCTX_CIPHER_KEY_SIZE_128 0
#define CHCR_KEYCTX_CIPHER_KEY_SIZE_192 1
#define CHCR_KEYCTX_CIPHER_KEY_SIZE_256 2
#define CHCR_KEYCTX_NO_KEY 15
#define CHCR_CPL_FW4_PLD_IV_OFFSET (5 * 64) /* bytes. flt #5 and #6 */
#define CHCR_CPL_FW4_PLD_HASH_RESULT_OFFSET (7 * 64) /* bytes. flt #7 */
#define CHCR_CPL_FW4_PLD_DATA_SIZE (4 * 64) /* bytes. flt #4 to #7 */
#define KEY_CONTEXT_HDR_SALT_AND_PAD 16
#define flits_to_bytes(x) (x * 8)
#define IV_NOP 0
#define IV_IMMEDIATE 1
#define IV_DSGL 2
#define CRYPTO_ALG_SUB_TYPE_MASK 0x0f000000
#define CRYPTO_ALG_SUB_TYPE_HASH_HMAC 0x01000000
#define CRYPTO_ALG_TYPE_HMAC (CRYPTO_ALG_TYPE_AHASH |\
CRYPTO_ALG_SUB_TYPE_HASH_HMAC)
#define MAX_SALT 4
#define MAX_SCRATCH_PAD_SIZE 32
#define CHCR_HASH_MAX_BLOCK_SIZE_64 64
#define CHCR_HASH_MAX_BLOCK_SIZE_128 128
/* Aligned to 128 bit boundary */
struct _key_ctx {
__be32 ctx_hdr;
u8 salt[MAX_SALT];
__be64 reserverd;
unsigned char key[0];
};
struct ablk_ctx {
u8 enc;
unsigned int processed_len;
__be32 key_ctx_hdr;
unsigned int enckey_len;
unsigned int dst_nents;
struct scatterlist iv_sg;
u8 key[CHCR_AES_MAX_KEY_LEN];
u8 iv[CHCR_MAX_CRYPTO_IV_LEN];
unsigned char ciph_mode;
};
struct hmac_ctx {
struct shash_desc *desc;
u8 ipad[CHCR_HASH_MAX_BLOCK_SIZE_128];
u8 opad[CHCR_HASH_MAX_BLOCK_SIZE_128];
};
struct __crypto_ctx {
struct hmac_ctx hmacctx[0];
struct ablk_ctx ablkctx[0];
};
struct chcr_context {
struct chcr_dev *dev;
unsigned char tx_channel_id;
struct __crypto_ctx crypto_ctx[0];
};
struct chcr_ahash_req_ctx {
u32 result;
char bfr[CHCR_HASH_MAX_BLOCK_SIZE_128];
u8 bfr_len;
/* DMA the partial hash in it */
u8 partial_hash[CHCR_HASH_MAX_DIGEST_SIZE];
u64 data_len; /* Data len till time */
void *dummy_payload_ptr;
/* SKB which is being sent to the hardware for processing */
struct sk_buff *skb;
};
struct chcr_blkcipher_req_ctx {
struct sk_buff *skb;
};
struct chcr_alg_template {
u32 type;
u32 is_registered;
union {
struct crypto_alg crypto;
struct ahash_alg hash;
} alg;
};
struct chcr_req_ctx {
union {
struct ahash_request *ahash_req;
struct ablkcipher_request *ablk_req;
} req;
union {
struct chcr_ahash_req_ctx *ahash_ctx;
struct chcr_blkcipher_req_ctx *ablk_ctx;
} ctx;
};
struct sge_opaque_hdr {
void *dev;
dma_addr_t addr[MAX_SKB_FRAGS + 1];
};
typedef struct sk_buff *(*create_wr_t)(struct crypto_async_request *req,
struct chcr_context *ctx,
unsigned short qid,
unsigned short op_type);
#endif /* __CHCR_CRYPTO_H__ */

1
drivers/infiniband/hw/cxgb4/Kconfig
View File

@ -1,6 +1,7 @@
config INFINIBAND_CXGB4
tristate "Chelsio T4/T5 RDMA Driver"
depends on CHELSIO_T4 && INET && (IPV6 || IPV6=n)
select CHELSIO_LIB
select GENERIC_ALLOCATOR
---help---
This is an iWARP/RDMA driver for the Chelsio T4 and T5

1
drivers/infiniband/hw/cxgb4/Makefile
View File

@ -1,4 +1,5 @@
ccflags-y := -Idrivers/net/ethernet/chelsio/cxgb4
ccflags-y += -Idrivers/net/ethernet/chelsio/libcxgb
obj-$(CONFIG_INFINIBAND_CXGB4) += iw_cxgb4.o

288
drivers/infiniband/hw/cxgb4/cm.c
View File

@ -49,6 +49,7 @@
#include <rdma/ib_addr.h>
#include <libcxgb_cm.h>
#include "iw_cxgb4.h"
#include "clip_tbl.h"
@ -239,15 +240,13 @@ int c4iw_ofld_send(struct c4iw_rdev *rdev, struct sk_buff *skb)
static void release_tid(struct c4iw_rdev *rdev, u32 hwtid, struct sk_buff *skb)
{
struct cpl_tid_release *req;
u32 len = roundup(sizeof(struct cpl_tid_release), 16);
skb = get_skb(skb, sizeof *req, GFP_KERNEL);
skb = get_skb(skb, len, GFP_KERNEL);
if (!skb)
return;
req = (struct cpl_tid_release *) skb_put(skb, sizeof(*req));
INIT_TP_WR(req, hwtid);
OPCODE_TID(req) = cpu_to_be32(MK_OPCODE_TID(CPL_TID_RELEASE, hwtid));
set_wr_txq(skb, CPL_PRIORITY_SETUP, 0);
cxgb_mk_tid_release(skb, len, hwtid, 0);
c4iw_ofld_send(rdev, skb);
return;
}
@ -466,72 +465,6 @@ static struct net_device *get_real_dev(struct net_device *egress_dev)
return rdma_vlan_dev_real_dev(egress_dev) ? : egress_dev;
}
static int our_interface(struct c4iw_dev *dev, struct net_device *egress_dev)
{
int i;
egress_dev = get_real_dev(egress_dev);
for (i = 0; i < dev->rdev.lldi.nports; i++)
if (dev->rdev.lldi.ports[i] == egress_dev)
return 1;
return 0;
}
static struct dst_entry *find_route6(struct c4iw_dev *dev, __u8 *local_ip,
__u8 *peer_ip, __be16 local_port,
__be16 peer_port, u8 tos,
__u32 sin6_scope_id)
{
struct dst_entry *dst = NULL;
if (IS_ENABLED(CONFIG_IPV6)) {
struct flowi6 fl6;
memset(&fl6, 0, sizeof(fl6));
memcpy(&fl6.daddr, peer_ip, 16);
memcpy(&fl6.saddr, local_ip, 16);
if (ipv6_addr_type(&fl6.daddr) & IPV6_ADDR_LINKLOCAL)
fl6.flowi6_oif = sin6_scope_id;
dst = ip6_route_output(&init_net, NULL, &fl6);
if (!dst)
goto out;
if (!our_interface(dev, ip6_dst_idev(dst)->dev) &&
!(ip6_dst_idev(dst)->dev->flags & IFF_LOOPBACK)) {
dst_release(dst);
dst = NULL;
}
}
out:
return dst;
}
static struct dst_entry *find_route(struct c4iw_dev *dev, __be32 local_ip,
__be32 peer_ip, __be16 local_port,
__be16 peer_port, u8 tos)
{
struct rtable *rt;
struct flowi4 fl4;
struct neighbour *n;
rt = ip_route_output_ports(&init_net, &fl4, NULL, peer_ip, local_ip,
peer_port, local_port, IPPROTO_TCP,
tos, 0);
if (IS_ERR(rt))
return NULL;
n = dst_neigh_lookup(&rt->dst, &peer_ip);
if (!n)
return NULL;
if (!our_interface(dev, n->dev) &&
!(n->dev->flags & IFF_LOOPBACK)) {
neigh_release(n);
dst_release(&rt->dst);
return NULL;
}
neigh_release(n);
return &rt->dst;
}
static void arp_failure_discard(void *handle, struct sk_buff *skb)
{
pr_err(MOD "ARP failure\n");
@ -706,58 +639,34 @@ static int send_flowc(struct c4iw_ep *ep)
static int send_halfclose(struct c4iw_ep *ep)
{
struct cpl_close_con_req *req;
struct sk_buff *skb = skb_dequeue(&ep->com.ep_skb_list);
int wrlen = roundup(sizeof *req, 16);
u32 wrlen = roundup(sizeof(struct cpl_close_con_req), 16);
PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
if (WARN_ON(!skb))
return -ENOMEM;
set_wr_txq(skb, CPL_PRIORITY_DATA, ep->txq_idx);
t4_set_arp_err_handler(skb, NULL, arp_failure_discard);
req = (struct cpl_close_con_req *) skb_put(skb, wrlen);
memset(req, 0, wrlen);
INIT_TP_WR(req, ep->hwtid);
OPCODE_TID(req) = cpu_to_be32(MK_OPCODE_TID(CPL_CLOSE_CON_REQ,
ep->hwtid));
cxgb_mk_close_con_req(skb, wrlen, ep->hwtid, ep->txq_idx,
NULL, arp_failure_discard);
return c4iw_l2t_send(&ep->com.dev->rdev, skb, ep->l2t);
}
static int send_abort(struct c4iw_ep *ep)
{
struct cpl_abort_req *req;
int wrlen = roundup(sizeof *req, 16);
u32 wrlen = roundup(sizeof(struct cpl_abort_req), 16);
struct sk_buff *req_skb = skb_dequeue(&ep->com.ep_skb_list);
PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
if (WARN_ON(!req_skb))
return -ENOMEM;
set_wr_txq(req_skb, CPL_PRIORITY_DATA, ep->txq_idx);
t4_set_arp_err_handler(req_skb, ep, abort_arp_failure);
req = (struct cpl_abort_req *)skb_put(req_skb, wrlen);
memset(req, 0, wrlen);
INIT_TP_WR(req, ep->hwtid);
OPCODE_TID(req) = cpu_to_be32(MK_OPCODE_TID(CPL_ABORT_REQ, ep->hwtid));
req->cmd = CPL_ABORT_SEND_RST;
cxgb_mk_abort_req(req_skb, wrlen, ep->hwtid, ep->txq_idx,
ep, abort_arp_failure);
return c4iw_l2t_send(&ep->com.dev->rdev, req_skb, ep->l2t);
}
static void best_mtu(const unsigned short *mtus, unsigned short mtu,
unsigned int *idx, int use_ts, int ipv6)
{
unsigned short hdr_size = (ipv6 ?
sizeof(struct ipv6hdr) :
sizeof(struct iphdr)) +
sizeof(struct tcphdr) +
(use_ts ?
round_up(TCPOLEN_TIMESTAMP, 4) : 0);
unsigned short data_size = mtu - hdr_size;
cxgb4_best_aligned_mtu(mtus, hdr_size, data_size, 8, idx);
}
static int send_connect(struct c4iw_ep *ep)
{
struct cpl_act_open_req *req = NULL;
@ -770,7 +679,7 @@ static int send_connect(struct c4iw_ep *ep)
u64 opt0;
u32 opt2;
unsigned int mtu_idx;
int wscale;
u32 wscale;
int win, sizev4, sizev6, wrlen;
struct sockaddr_in *la = (struct sockaddr_in *)
&ep->com.local_addr;
@ -817,10 +726,10 @@ static int send_connect(struct c4iw_ep *ep)
}
set_wr_txq(skb, CPL_PRIORITY_SETUP, ep->ctrlq_idx);
best_mtu(ep->com.dev->rdev.lldi.mtus, ep->mtu, &mtu_idx,
enable_tcp_timestamps,
(AF_INET == ep->com.remote_addr.ss_family) ? 0 : 1);
wscale = compute_wscale(rcv_win);
cxgb_best_mtu(ep->com.dev->rdev.lldi.mtus, ep->mtu, &mtu_idx,
enable_tcp_timestamps,
(ep->com.remote_addr.ss_family == AF_INET) ? 0 : 1);
wscale = cxgb_compute_wscale(rcv_win);
/*
* Specify the largest window that will fit in opt0. The
@ -1447,9 +1356,9 @@ static void established_upcall(struct c4iw_ep *ep)
static int update_rx_credits(struct c4iw_ep *ep, u32 credits)
{
struct cpl_rx_data_ack *req;
struct sk_buff *skb;
int wrlen = roundup(sizeof *req, 16);
u32 wrlen = roundup(sizeof(struct cpl_rx_data_ack), 16);
u32 credit_dack;
PDBG("%s ep %p tid %u credits %u\n", __func__, ep, ep->hwtid, credits);
skb = get_skb(NULL, wrlen, GFP_KERNEL);
@ -1466,15 +1375,12 @@ static int update_rx_credits(struct c4iw_ep *ep, u32 credits)
if (ep->rcv_win > RCV_BUFSIZ_M * 1024)
credits += ep->rcv_win - RCV_BUFSIZ_M * 1024;
req = (struct cpl_rx_data_ack *) skb_put(skb, wrlen);
memset(req, 0, wrlen);
INIT_TP_WR(req, ep->hwtid);
OPCODE_TID(req) = cpu_to_be32(MK_OPCODE_TID(CPL_RX_DATA_ACK,
ep->hwtid));
req->credit_dack = cpu_to_be32(credits | RX_FORCE_ACK_F |
RX_DACK_CHANGE_F |
RX_DACK_MODE_V(dack_mode));
set_wr_txq(skb, CPL_PRIORITY_ACK, ep->ctrlq_idx);
credit_dack = credits | RX_FORCE_ACK_F | RX_DACK_CHANGE_F |
RX_DACK_MODE_V(dack_mode);
cxgb_mk_rx_data_ack(skb, wrlen, ep->hwtid, ep->ctrlq_idx,
credit_dack);
c4iw_ofld_send(&ep->com.dev->rdev, skb);
return credits;
}
@ -1972,7 +1878,7 @@ static int send_fw_act_open_req(struct c4iw_ep *ep, unsigned int atid)
struct sk_buff *skb;
struct fw_ofld_connection_wr *req;
unsigned int mtu_idx;
int wscale;
u32 wscale;
struct sockaddr_in *sin;
int win;
@ -1997,10 +1903,10 @@ static int send_fw_act_open_req(struct c4iw_ep *ep, unsigned int atid)
htons(FW_OFLD_CONNECTION_WR_CPLRXDATAACK_F);
req->tcb.tx_max = (__force __be32) jiffies;
req->tcb.rcv_adv = htons(1);
best_mtu(ep->com.dev->rdev.lldi.mtus, ep->mtu, &mtu_idx,
enable_tcp_timestamps,
(AF_INET == ep->com.remote_addr.ss_family) ? 0 : 1);
wscale = compute_wscale(rcv_win);
cxgb_best_mtu(ep->com.dev->rdev.lldi.mtus, ep->mtu, &mtu_idx,
enable_tcp_timestamps,
(ep->com.remote_addr.ss_family == AF_INET) ? 0 : 1);
wscale = cxgb_compute_wscale(rcv_win);
/*
* Specify the largest window that will fit in opt0. The
@ -2054,15 +1960,6 @@ static inline int act_open_has_tid(int status)
status != CPL_ERR_CONN_EXIST);
}
/* Returns whether a CPL status conveys negative advice.
*/
static int is_neg_adv(unsigned int status)
{
return status == CPL_ERR_RTX_NEG_ADVICE ||
status == CPL_ERR_PERSIST_NEG_ADVICE ||
status == CPL_ERR_KEEPALV_NEG_ADVICE;
}
static char *neg_adv_str(unsigned int status)
{
switch (status) {
@ -2218,16 +2115,21 @@ static int c4iw_reconnect(struct c4iw_ep *ep)
/* find a route */
if (ep->com.cm_id->m_local_addr.ss_family == AF_INET) {
ep->dst = find_route(ep->com.dev, laddr->sin_addr.s_addr,
raddr->sin_addr.s_addr, laddr->sin_port,
raddr->sin_port, ep->com.cm_id->tos);
ep->dst = cxgb_find_route(&ep->com.dev->rdev.lldi, get_real_dev,
laddr->sin_addr.s_addr,
raddr->sin_addr.s_addr,
laddr->sin_port,
raddr->sin_port, ep->com.cm_id->tos);
iptype = 4;
ra = (__u8 *)&raddr->sin_addr;
} else {
ep->dst = find_route6(ep->com.dev, laddr6->sin6_addr.s6_addr,
raddr6->sin6_addr.s6_addr,
laddr6->sin6_port, raddr6->sin6_port, 0,
raddr6->sin6_scope_id);
ep->dst = cxgb_find_route6(&ep->com.dev->rdev.lldi,
get_real_dev,
laddr6->sin6_addr.s6_addr,
raddr6->sin6_addr.s6_addr,
laddr6->sin6_port,
raddr6->sin6_port, 0,
raddr6->sin6_scope_id);
iptype = 6;
ra = (__u8 *)&raddr6->sin6_addr;
}
@ -2299,7 +2201,7 @@ static int act_open_rpl(struct c4iw_dev *dev, struct sk_buff *skb)
PDBG("%s ep %p atid %u status %u errno %d\n", __func__, ep, atid,
status, status2errno(status));
if (is_neg_adv(status)) {
if (cxgb_is_neg_adv(status)) {
PDBG("%s Connection problems for atid %u status %u (%s)\n",
__func__, atid, status, neg_adv_str(status));
ep->stats.connect_neg_adv++;
@ -2426,7 +2328,7 @@ static int accept_cr(struct c4iw_ep *ep, struct sk_buff *skb,
unsigned int mtu_idx;
u64 opt0;
u32 opt2;
int wscale;
u32 wscale;
struct cpl_t5_pass_accept_rpl *rpl5 = NULL;
int win;
enum chip_type adapter_type = ep->com.dev->rdev.lldi.adapter_type;
@ -2447,10 +2349,10 @@ static int accept_cr(struct c4iw_ep *ep, struct sk_buff *skb,
OPCODE_TID(rpl) = cpu_to_be32(MK_OPCODE_TID(CPL_PASS_ACCEPT_RPL,
ep->hwtid));
best_mtu(ep->com.dev->rdev.lldi.mtus, ep->mtu, &mtu_idx,
enable_tcp_timestamps && req->tcpopt.tstamp,
(AF_INET == ep->com.remote_addr.ss_family) ? 0 : 1);
wscale = compute_wscale(rcv_win);
cxgb_best_mtu(ep->com.dev->rdev.lldi.mtus, ep->mtu, &mtu_idx,
enable_tcp_timestamps && req->tcpopt.tstamp,
(ep->com.remote_addr.ss_family == AF_INET) ? 0 : 1);
wscale = cxgb_compute_wscale(rcv_win);
/*
* Specify the largest window that will fit in opt0. The
@ -2522,42 +2424,6 @@ static void reject_cr(struct c4iw_dev *dev, u32 hwtid, struct sk_buff *skb)
return;
}
static void get_4tuple(struct cpl_pass_accept_req *req, enum chip_type type,
int *iptype, __u8 *local_ip, __u8 *peer_ip,
__be16 *local_port, __be16 *peer_port)
{
int eth_len = (CHELSIO_CHIP_VERSION(type) <= CHELSIO_T5) ?
ETH_HDR_LEN_G(be32_to_cpu(req->hdr_len)) :
T6_ETH_HDR_LEN_G(be32_to_cpu(req->hdr_len));
int ip_len = (CHELSIO_CHIP_VERSION(type) <= CHELSIO_T5) ?
IP_HDR_LEN_G(be32_to_cpu(req->hdr_len)) :
T6_IP_HDR_LEN_G(be32_to_cpu(req->hdr_len));
struct iphdr *ip = (struct iphdr *)((u8 *)(req + 1) + eth_len);
struct ipv6hdr *ip6 = (struct ipv6hdr *)((u8 *)(req + 1) + eth_len);
struct tcphdr *tcp = (struct tcphdr *)
((u8 *)(req + 1) + eth_len + ip_len);
if (ip->version == 4) {
PDBG("%s saddr 0x%x daddr 0x%x sport %u dport %u\n", __func__,
ntohl(ip->saddr), ntohl(ip->daddr), ntohs(tcp->source),
ntohs(tcp->dest));
*iptype = 4;
memcpy(peer_ip, &ip->saddr, 4);
memcpy(local_ip, &ip->daddr, 4);
} else {
PDBG("%s saddr %pI6 daddr %pI6 sport %u dport %u\n", __func__,
ip6->saddr.s6_addr, ip6->daddr.s6_addr, ntohs(tcp->source),
ntohs(tcp->dest));
*iptype = 6;
memcpy(peer_ip, ip6->saddr.s6_addr, 16);
memcpy(local_ip, ip6->daddr.s6_addr, 16);
}
*peer_port = tcp->source;
*local_port = tcp->dest;
return;
}
static int pass_accept_req(struct c4iw_dev *dev, struct sk_buff *skb)
{
struct c4iw_ep *child_ep = NULL, *parent_ep;
@ -2586,8 +2452,8 @@ static int pass_accept_req(struct c4iw_dev *dev, struct sk_buff *skb)
goto reject;
}
get_4tuple(req, parent_ep->com.dev->rdev.lldi.adapter_type, &iptype,
local_ip, peer_ip, &local_port, &peer_port);
cxgb_get_4tuple(req, parent_ep->com.dev->rdev.lldi.adapter_type,
&iptype, local_ip, peer_ip, &local_port, &peer_port);
/* Find output route */
if (iptype == 4) {
@ -2595,18 +2461,19 @@ static int pass_accept_req(struct c4iw_dev *dev, struct sk_buff *skb)
, __func__, parent_ep, hwtid,
local_ip, peer_ip, ntohs(local_port),
ntohs(peer_port), peer_mss);
dst = find_route(dev, *(__be32 *)local_ip, *(__be32 *)peer_ip,
local_port, peer_port,
tos);
dst = cxgb_find_route(&dev->rdev.lldi, get_real_dev,
*(__be32 *)local_ip, *(__be32 *)peer_ip,
local_port, peer_port, tos);
} else {
PDBG("%s parent ep %p hwtid %u laddr %pI6 raddr %pI6 lport %d rport %d peer_mss %d\n"
, __func__, parent_ep, hwtid,
local_ip, peer_ip, ntohs(local_port),
ntohs(peer_port), peer_mss);
dst = find_route6(dev, local_ip, peer_ip, local_port, peer_port,
PASS_OPEN_TOS_G(ntohl(req->tos_stid)),
((struct sockaddr_in6 *)
&parent_ep->com.local_addr)->sin6_scope_id);
dst = cxgb_find_route6(&dev->rdev.lldi, get_real_dev,
local_ip, peer_ip, local_port, peer_port,
PASS_OPEN_TOS_G(ntohl(req->tos_stid)),
((struct sockaddr_in6 *)
&parent_ep->com.local_addr)->sin6_scope_id);
}
if (!dst) {
printk(KERN_ERR MOD "%s - failed to find dst entry!\n",
@ -2839,18 +2706,18 @@ static int peer_abort(struct c4iw_dev *dev, struct sk_buff *skb)
{
struct cpl_abort_req_rss *req = cplhdr(skb);
struct c4iw_ep *ep;
struct cpl_abort_rpl *rpl;
struct sk_buff *rpl_skb;
struct c4iw_qp_attributes attrs;
int ret;
int release = 0;
unsigned int tid = GET_TID(req);
u32 len = roundup(sizeof(struct cpl_abort_rpl), 16);
ep = get_ep_from_tid(dev, tid);
if (!ep)
return 0;
if (is_neg_adv(req->status)) {
if (cxgb_is_neg_adv(req->status)) {
PDBG("%s Negative advice on abort- tid %u status %d (%s)\n",
__func__, ep->hwtid, req->status,
neg_adv_str(req->status));
@ -2943,11 +2810,9 @@ static int peer_abort(struct c4iw_dev *dev, struct sk_buff *skb)
release = 1;
goto out;
}
set_wr_txq(skb, CPL_PRIORITY_DATA, ep->txq_idx);
rpl = (struct cpl_abort_rpl *) skb_put(rpl_skb, sizeof(*rpl));
INIT_TP_WR(rpl, ep->hwtid);
OPCODE_TID(rpl) = cpu_to_be32(MK_OPCODE_TID(CPL_ABORT_RPL, ep->hwtid));
rpl->cmd = CPL_ABORT_NO_RST;
cxgb_mk_abort_rpl(rpl_skb, len, ep->hwtid, ep->txq_idx);
c4iw_ofld_send(&ep->com.dev->rdev, rpl_skb);
out:
if (release)
@ -3379,9 +3244,11 @@ int c4iw_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
PDBG("%s saddr %pI4 sport 0x%x raddr %pI4 rport 0x%x\n",
__func__, &laddr->sin_addr, ntohs(laddr->sin_port),
ra, ntohs(raddr->sin_port));
ep->dst = find_route(dev, laddr->sin_addr.s_addr,
raddr->sin_addr.s_addr, laddr->sin_port,
raddr->sin_port, cm_id->tos);
ep->dst = cxgb_find_route(&dev->rdev.lldi, get_real_dev,
laddr->sin_addr.s_addr,
raddr->sin_addr.s_addr,
laddr->sin_port,
raddr->sin_port, cm_id->tos);
} else {
iptype = 6;
ra = (__u8 *)&raddr6->sin6_addr;
@ -3400,10 +3267,12 @@ int c4iw_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
__func__, laddr6->sin6_addr.s6_addr,
ntohs(laddr6->sin6_port),
raddr6->sin6_addr.s6_addr, ntohs(raddr6->sin6_port));
ep->dst = find_route6(dev, laddr6->sin6_addr.s6_addr,
raddr6->sin6_addr.s6_addr,
laddr6->sin6_port, raddr6->sin6_port, 0,
raddr6->sin6_scope_id);
ep->dst = cxgb_find_route6(&dev->rdev.lldi, get_real_dev,
laddr6->sin6_addr.s6_addr,
raddr6->sin6_addr.s6_addr,
laddr6->sin6_port,
raddr6->sin6_port, 0,
raddr6->sin6_scope_id);
}
if (!ep->dst) {
printk(KERN_ERR MOD "%s - cannot find route.\n", __func__);
@ -4045,8 +3914,9 @@ static int rx_pkt(struct c4iw_dev *dev, struct sk_buff *skb)
ntohl(iph->daddr), ntohs(tcph->dest), ntohl(iph->saddr),
ntohs(tcph->source), iph->tos);
dst = find_route(dev, iph->daddr, iph->saddr, tcph->dest, tcph->source,
iph->tos);
dst = cxgb_find_route(&dev->rdev.lldi, get_real_dev,
iph->daddr, iph->saddr, tcph->dest,
tcph->source, iph->tos);
if (!dst) {
pr_err("%s - failed to find dst entry!\n",
__func__);
@ -4321,7 +4191,7 @@ static int peer_abort_intr(struct c4iw_dev *dev, struct sk_buff *skb)
kfree_skb(skb);
return 0;
}
if (is_neg_adv(req->status)) {
if (cxgb_is_neg_adv(req->status)) {
PDBG("%s Negative advice on abort- tid %u status %d (%s)\n",
__func__, ep->hwtid, req->status,
neg_adv_str(req->status));

4
drivers/infiniband/hw/cxgb4/device.c
View File

@ -1480,6 +1480,10 @@ static int c4iw_uld_control(void *handle, enum cxgb4_control control, ...)
static struct cxgb4_uld_info c4iw_uld_info = {
.name = DRV_NAME,
.nrxq = MAX_ULD_QSETS,
.rxq_size = 511,
.ciq = true,
.lro = false,
.add = c4iw_uld_add,
.rx_handler = c4iw_uld_rx_handler,
.state_change = c4iw_uld_state_change,

9
drivers/infiniband/hw/cxgb4/iw_cxgb4.h
View File

@ -882,15 +882,6 @@ static inline struct c4iw_listen_ep *to_listen_ep(struct iw_cm_id *cm_id)
return cm_id->provider_data;
}
static inline int compute_wscale(int win)
{
int wscale = 0;
while (wscale < 14 && (65535<<wscale) < win)
wscale++;
return wscale;
}
static inline int ocqp_supported(const struct cxgb4_lld_info *infop)
{
#if defined(__i386__) || defined(__x86_64__) || defined(CONFIG_PPC64)

108
drivers/infiniband/hw/mlx5/cq.c
View File

@ -729,14 +729,16 @@ static int alloc_cq_buf(struct mlx5_ib_dev *dev, struct mlx5_ib_cq_buf *buf,
static int create_cq_user(struct mlx5_ib_dev *dev, struct ib_udata *udata,
struct ib_ucontext *context, struct mlx5_ib_cq *cq,
int entries, struct mlx5_create_cq_mbox_in **cqb,
int entries, u32 **cqb,
int *cqe_size, int *index, int *inlen)
{
struct mlx5_ib_create_cq ucmd;
size_t ucmdlen;
int page_shift;
__be64 *pas;
int npages;
int ncont;
void *cqc;
int err;
ucmdlen =
@ -774,14 +776,20 @@ static int create_cq_user(struct mlx5_ib_dev *dev, struct ib_udata *udata,
mlx5_ib_dbg(dev, "addr 0x%llx, size %u, npages %d, page_shift %d, ncont %d\n",
ucmd.buf_addr, entries * ucmd.cqe_size, npages, page_shift, ncont);
*inlen = sizeof(**cqb) + sizeof(*(*cqb)->pas) * ncont;
*inlen = MLX5_ST_SZ_BYTES(create_cq_in) +
MLX5_FLD_SZ_BYTES(create_cq_in, pas[0]) * ncont;
*cqb = mlx5_vzalloc(*inlen);
if (!*cqb) {
err = -ENOMEM;
goto err_db;
}
mlx5_ib_populate_pas(dev, cq->buf.umem, page_shift, (*cqb)->pas, 0);
(*cqb)->ctx.log_pg_sz = page_shift - MLX5_ADAPTER_PAGE_SHIFT;
pas = (__be64 *)MLX5_ADDR_OF(create_cq_in, *cqb, pas);
mlx5_ib_populate_pas(dev, cq->buf.umem, page_shift, pas, 0);
cqc = MLX5_ADDR_OF(create_cq_in, *cqb, cq_context);
MLX5_SET(cqc, cqc, log_page_size,
page_shift - MLX5_ADAPTER_PAGE_SHIFT);
*index = to_mucontext(context)->uuari.uars[0].index;
@ -816,9 +824,10 @@ static void init_cq_buf(struct mlx5_ib_cq *cq, struct mlx5_ib_cq_buf *buf)
static int create_cq_kernel(struct mlx5_ib_dev *dev, struct mlx5_ib_cq *cq,
int entries, int cqe_size,
struct mlx5_create_cq_mbox_in **cqb,
int *index, int *inlen)
u32 **cqb, int *index, int *inlen)
{
__be64 *pas;
void *cqc;
int err;
err = mlx5_db_alloc(dev->mdev, &cq->db);
@ -835,15 +844,21 @@ static int create_cq_kernel(struct mlx5_ib_dev *dev, struct mlx5_ib_cq *cq,
init_cq_buf(cq, &cq->buf);
*inlen = sizeof(**cqb) + sizeof(*(*cqb)->pas) * cq->buf.buf.npages;
*inlen = MLX5_ST_SZ_BYTES(create_cq_in) +
MLX5_FLD_SZ_BYTES(create_cq_in, pas[0]) * cq->buf.buf.npages;
*cqb = mlx5_vzalloc(*inlen);
if (!*cqb) {
err = -ENOMEM;
goto err_buf;
}
mlx5_fill_page_array(&cq->buf.buf, (*cqb)->pas);
(*cqb)->ctx.log_pg_sz = cq->buf.buf.page_shift - MLX5_ADAPTER_PAGE_SHIFT;
pas = (__be64 *)MLX5_ADDR_OF(create_cq_in, *cqb, pas);
mlx5_fill_page_array(&cq->buf.buf, pas);
cqc = MLX5_ADDR_OF(create_cq_in, *cqb, cq_context);
MLX5_SET(cqc, cqc, log_page_size,
cq->buf.buf.page_shift - MLX5_ADAPTER_PAGE_SHIFT);
*index = dev->mdev->priv.uuari.uars[0].index;
return 0;
@ -877,11 +892,12 @@ struct ib_cq *mlx5_ib_create_cq(struct ib_device *ibdev,
{
int entries = attr->cqe;
int vector = attr->comp_vector;
struct mlx5_create_cq_mbox_in *cqb = NULL;
struct mlx5_ib_dev *dev = to_mdev(ibdev);
struct mlx5_ib_cq *cq;
int uninitialized_var(index);
int uninitialized_var(inlen);
u32 *cqb = NULL;
void *cqc;
int cqe_size;
unsigned int irqn;
int eqn;
@ -927,19 +943,20 @@ struct ib_cq *mlx5_ib_create_cq(struct ib_device *ibdev,
INIT_WORK(&cq->notify_work, notify_soft_wc_handler);
}
cq->cqe_size = cqe_size;
cqb->ctx.cqe_sz_flags = cqe_sz_to_mlx_sz(cqe_size) << 5;
if (cq->create_flags & IB_CQ_FLAGS_IGNORE_OVERRUN)
cqb->ctx.cqe_sz_flags |= (1 << 1);
cqb->ctx.log_sz_usr_page = cpu_to_be32((ilog2(entries) << 24) | index);
err = mlx5_vector2eqn(dev->mdev, vector, &eqn, &irqn);
if (err)
goto err_cqb;
cqb->ctx.c_eqn = cpu_to_be16(eqn);
cqb->ctx.db_record_addr = cpu_to_be64(cq->db.dma);
cq->cqe_size = cqe_size;
cqc = MLX5_ADDR_OF(create_cq_in, cqb, cq_context);
MLX5_SET(cqc, cqc, cqe_sz, cqe_sz_to_mlx_sz(cqe_size));
MLX5_SET(cqc, cqc, log_cq_size, ilog2(entries));
MLX5_SET(cqc, cqc, uar_page, index);
MLX5_SET(cqc, cqc, c_eqn, eqn);
MLX5_SET64(cqc, cqc, dbr_addr, cq->db.dma);
if (cq->create_flags & IB_CQ_FLAGS_IGNORE_OVERRUN)
MLX5_SET(cqc, cqc, oi, 1);
err = mlx5_core_create_cq(dev->mdev, &cq->mcq, cqb, inlen);
if (err)
@ -1070,27 +1087,15 @@ void mlx5_ib_cq_clean(struct mlx5_ib_cq *cq, u32 qpn, struct mlx5_ib_srq *srq)
int mlx5_ib_modify_cq(struct ib_cq *cq, u16 cq_count, u16 cq_period)
{
struct mlx5_modify_cq_mbox_in *in;
struct mlx5_ib_dev *dev = to_mdev(cq->device);
struct mlx5_ib_cq *mcq = to_mcq(cq);
int err;
u32 fsel;
if (!MLX5_CAP_GEN(dev->mdev, cq_moderation))
return -ENOSYS;
in = kzalloc(sizeof(*in), GFP_KERNEL);
if (!in)
return -ENOMEM;
in->cqn = cpu_to_be32(mcq->mcq.cqn);
fsel = (MLX5_CQ_MODIFY_PERIOD | MLX5_CQ_MODIFY_COUNT);
in->ctx.cq_period = cpu_to_be16(cq_period);
in->ctx.cq_max_count = cpu_to_be16(cq_count);
in->field_select = cpu_to_be32(fsel);
err = mlx5_core_modify_cq(dev->mdev, &mcq->mcq, in, sizeof(*in));
kfree(in);
err = mlx5_core_modify_cq_moderation(dev->mdev, &mcq->mcq,
cq_period, cq_count);
if (err)
mlx5_ib_warn(dev, "modify cq 0x%x failed\n", mcq->mcq.cqn);
@ -1223,9 +1228,11 @@ int mlx5_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata)
{
struct mlx5_ib_dev *dev = to_mdev(ibcq->device);
struct mlx5_ib_cq *cq = to_mcq(ibcq);
struct mlx5_modify_cq_mbox_in *in;
void *cqc;
u32 *in;
int err;
int npas;
__be64 *pas;
int page_shift;
int inlen;
int uninitialized_var(cqe_size);
@ -1267,28 +1274,37 @@ int mlx5_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata)
if (err)
goto ex;
inlen = sizeof(*in) + npas * sizeof(in->pas[0]);
inlen = MLX5_ST_SZ_BYTES(modify_cq_in) +
MLX5_FLD_SZ_BYTES(modify_cq_in, pas[0]) * npas;
in = mlx5_vzalloc(inlen);
if (!in) {
err = -ENOMEM;
goto ex_resize;
}
pas = (__be64 *)MLX5_ADDR_OF(modify_cq_in, in, pas);
if (udata)
mlx5_ib_populate_pas(dev, cq->resize_umem, page_shift,
in->pas, 0);
pas, 0);
else
mlx5_fill_page_array(&cq->resize_buf->buf, in->pas);
mlx5_fill_page_array(&cq->resize_buf->buf, pas);
in->field_select = cpu_to_be32(MLX5_MODIFY_CQ_MASK_LOG_SIZE |
MLX5_MODIFY_CQ_MASK_PG_OFFSET |
MLX5_MODIFY_CQ_MASK_PG_SIZE);
in->ctx.log_pg_sz = page_shift - MLX5_ADAPTER_PAGE_SHIFT;
in->ctx.cqe_sz_flags = cqe_sz_to_mlx_sz(cqe_size) << 5;
in->ctx.page_offset = 0;
in->ctx.log_sz_usr_page = cpu_to_be32(ilog2(entries) << 24);
in->hdr.opmod = cpu_to_be16(MLX5_CQ_OPMOD_RESIZE);
in->cqn = cpu_to_be32(cq->mcq.cqn);
MLX5_SET(modify_cq_in, in,
modify_field_select_resize_field_select.resize_field_select.resize_field_select,
MLX5_MODIFY_CQ_MASK_LOG_SIZE |
MLX5_MODIFY_CQ_MASK_PG_OFFSET |
MLX5_MODIFY_CQ_MASK_PG_SIZE);
cqc = MLX5_ADDR_OF(modify_cq_in, in, cq_context);
MLX5_SET(cqc, cqc, log_page_size,
page_shift - MLX5_ADAPTER_PAGE_SHIFT);
MLX5_SET(cqc, cqc, cqe_sz, cqe_sz_to_mlx_sz(cqe_size));
MLX5_SET(cqc, cqc, log_cq_size, ilog2(entries));
MLX5_SET(modify_cq_in, in, op_mod, MLX5_CQ_OPMOD_RESIZE);
MLX5_SET(modify_cq_in, in, cqn, cq->mcq.cqn);
err = mlx5_core_modify_cq(dev->mdev, &cq->mcq, in, inlen);
if (err)

13
drivers/infiniband/hw/mlx5/main.c
View File

@ -232,23 +232,19 @@ static int set_roce_addr(struct ib_device *device, u8 port_num,
const union ib_gid *gid,
const struct ib_gid_attr *attr)
{
struct mlx5_ib_dev *dev = to_mdev(device);
u32 in[MLX5_ST_SZ_DW(set_roce_address_in)];
u32 out[MLX5_ST_SZ_DW(set_roce_address_out)];
struct mlx5_ib_dev *dev = to_mdev(device);
u32 in[MLX5_ST_SZ_DW(set_roce_address_in)] = {0};
u32 out[MLX5_ST_SZ_DW(set_roce_address_out)] = {0};
void *in_addr = MLX5_ADDR_OF(set_roce_address_in, in, roce_address);
enum rdma_link_layer ll = mlx5_ib_port_link_layer(device, port_num);
if (ll != IB_LINK_LAYER_ETHERNET)
return -EINVAL;
memset(in, 0, sizeof(in));
ib_gid_to_mlx5_roce_addr(gid, attr, in_addr);
MLX5_SET(set_roce_address_in, in, roce_address_index, index);
MLX5_SET(set_roce_address_in, in, opcode, MLX5_CMD_OP_SET_ROCE_ADDRESS);
memset(out, 0, sizeof(out));
return mlx5_cmd_exec(dev->mdev, in, sizeof(in), out, sizeof(out));
}
@ -753,8 +749,7 @@ static int mlx5_query_hca_port(struct ib_device *ibdev, u8 port,
&props->active_width);
if (err)
goto out;
err = mlx5_query_port_proto_oper(mdev, &props->active_speed, MLX5_PTYS_IB,
port);
err = mlx5_query_port_ib_proto_oper(mdev, &props->active_speed, port);
if (err)
goto out;

2
drivers/infiniband/hw/mlx5/mlx5_ib.h
View File

@ -505,7 +505,7 @@ struct mlx5_ib_mr {
int umred;
int npages;
struct mlx5_ib_dev *dev;
struct mlx5_create_mkey_mbox_out out;
u32 out[MLX5_ST_SZ_DW(create_mkey_out)];
struct mlx5_core_sig_ctx *sig;
int live;
void *descs_alloc;

182
drivers/infiniband/hw/mlx5/mr.c
View File

@ -135,20 +135,10 @@ static void reg_mr_callback(int status, void *context)
return;
}
if (mr->out.hdr.status) {
mlx5_ib_warn(dev, "failed - status %d, syndorme 0x%x\n",
mr->out.hdr.status,
be32_to_cpu(mr->out.hdr.syndrome));
kfree(mr);
dev->fill_delay = 1;
mod_timer(&dev->delay_timer, jiffies + HZ);
return;
}
spin_lock_irqsave(&dev->mdev->priv.mkey_lock, flags);
key = dev->mdev->priv.mkey_key++;
spin_unlock_irqrestore(&dev->mdev->priv.mkey_lock, flags);
mr->mmkey.key = mlx5_idx_to_mkey(be32_to_cpu(mr->out.mkey) & 0xffffff) | key;
mr->mmkey.key = mlx5_idx_to_mkey(MLX5_GET(create_mkey_out, mr->out, mkey_index)) | key;
cache->last_add = jiffies;
@ -170,16 +160,19 @@ static int add_keys(struct mlx5_ib_dev *dev, int c, int num)
{
struct mlx5_mr_cache *cache = &dev->cache;
struct mlx5_cache_ent *ent = &cache->ent[c];
struct mlx5_create_mkey_mbox_in *in;
int inlen = MLX5_ST_SZ_BYTES(create_mkey_in);
struct mlx5_ib_mr *mr;
int npages = 1 << ent->order;
void *mkc;
u32 *in;
int err = 0;
int i;
in = kzalloc(sizeof(*in), GFP_KERNEL);
in = kzalloc(inlen, GFP_KERNEL);
if (!in)
return -ENOMEM;
mkc = MLX5_ADDR_OF(create_mkey_in, in, memory_key_mkey_entry);
for (i = 0; i < num; i++) {
if (ent->pending >= MAX_PENDING_REG_MR) {
err = -EAGAIN;
@ -194,18 +187,22 @@ static int add_keys(struct mlx5_ib_dev *dev, int c, int num)
mr->order = ent->order;
mr->umred = 1;
mr->dev = dev;
in->seg.status = MLX5_MKEY_STATUS_FREE;
in->seg.xlt_oct_size = cpu_to_be32((npages + 1) / 2);
in->seg.qpn_mkey7_0 = cpu_to_be32(0xffffff << 8);
in->seg.flags = MLX5_ACCESS_MODE_MTT | MLX5_PERM_UMR_EN;
in->seg.log2_page_size = 12;
MLX5_SET(mkc, mkc, free, 1);
MLX5_SET(mkc, mkc, umr_en, 1);
MLX5_SET(mkc, mkc, access_mode, MLX5_MKC_ACCESS_MODE_MTT);
MLX5_SET(mkc, mkc, qpn, 0xffffff);
MLX5_SET(mkc, mkc, translations_octword_size, (npages + 1) / 2);
MLX5_SET(mkc, mkc, log_page_size, 12);
spin_lock_irq(&ent->lock);
ent->pending++;
spin_unlock_irq(&ent->lock);
err = mlx5_core_create_mkey(dev->mdev, &mr->mmkey, in,
sizeof(*in), reg_mr_callback,
mr, &mr->out);
err = mlx5_core_create_mkey_cb(dev->mdev, &mr->mmkey,
in, inlen,
mr->out, sizeof(mr->out),
reg_mr_callback, mr);
if (err) {
spin_lock_irq(&ent->lock);
ent->pending--;
@ -670,30 +667,38 @@ int mlx5_mr_cache_cleanup(struct mlx5_ib_dev *dev)
struct ib_mr *mlx5_ib_get_dma_mr(struct ib_pd *pd, int acc)
{
struct mlx5_ib_dev *dev = to_mdev(pd->device);
int inlen = MLX5_ST_SZ_BYTES(create_mkey_in);
struct mlx5_core_dev *mdev = dev->mdev;
struct mlx5_create_mkey_mbox_in *in;
struct mlx5_mkey_seg *seg;
struct mlx5_ib_mr *mr;
void *mkc;
u32 *in;
int err;
mr = kzalloc(sizeof(*mr), GFP_KERNEL);
if (!mr)
return ERR_PTR(-ENOMEM);
in = kzalloc(sizeof(*in), GFP_KERNEL);
in = kzalloc(inlen, GFP_KERNEL);
if (!in) {
err = -ENOMEM;
goto err_free;
}
seg = &in->seg;
seg->flags = convert_access(acc) | MLX5_ACCESS_MODE_PA;
seg->flags_pd = cpu_to_be32(to_mpd(pd)->pdn | MLX5_MKEY_LEN64);
seg->qpn_mkey7_0 = cpu_to_be32(0xffffff << 8);
seg->start_addr = 0;
mkc = MLX5_ADDR_OF(create_mkey_in, in, memory_key_mkey_entry);
err = mlx5_core_create_mkey(mdev, &mr->mmkey, in, sizeof(*in), NULL, NULL,
NULL);
MLX5_SET(mkc, mkc, access_mode, MLX5_MKC_ACCESS_MODE_PA);
MLX5_SET(mkc, mkc, a, !!(acc & IB_ACCESS_REMOTE_ATOMIC));
MLX5_SET(mkc, mkc, rw, !!(acc & IB_ACCESS_REMOTE_WRITE));
MLX5_SET(mkc, mkc, rr, !!(acc & IB_ACCESS_REMOTE_READ));
MLX5_SET(mkc, mkc, lw, !!(acc & IB_ACCESS_LOCAL_WRITE));
MLX5_SET(mkc, mkc, lr, 1);
MLX5_SET(mkc, mkc, length64, 1);
MLX5_SET(mkc, mkc, pd, to_mpd(pd)->pdn);
MLX5_SET(mkc, mkc, qpn, 0xffffff);
MLX5_SET64(mkc, mkc, start_addr, 0);
err = mlx5_core_create_mkey(mdev, &mr->mmkey, in, inlen);
if (err)
goto err_in;
@ -1063,9 +1068,11 @@ static struct mlx5_ib_mr *reg_create(struct ib_mr *ibmr, struct ib_pd *pd,
int page_shift, int access_flags)
{
struct mlx5_ib_dev *dev = to_mdev(pd->device);
struct mlx5_create_mkey_mbox_in *in;
struct mlx5_ib_mr *mr;
__be64 *pas;
void *mkc;
int inlen;
u32 *in;
int err;
bool pg_cap = !!(MLX5_CAP_GEN(dev->mdev, pg));
@ -1073,31 +1080,41 @@ static struct mlx5_ib_mr *reg_create(struct ib_mr *ibmr, struct ib_pd *pd,
if (!mr)
return ERR_PTR(-ENOMEM);
inlen = sizeof(*in) + sizeof(*in->pas) * ((npages + 1) / 2) * 2;
inlen = MLX5_ST_SZ_BYTES(create_mkey_in) +
sizeof(*pas) * ((npages + 1) / 2) * 2;
in = mlx5_vzalloc(inlen);
if (!in) {
err = -ENOMEM;
goto err_1;
}
mlx5_ib_populate_pas(dev, umem, page_shift, in->pas,
pas = (__be64 *)MLX5_ADDR_OF(create_mkey_in, in, klm_pas_mtt);
mlx5_ib_populate_pas(dev, umem, page_shift, pas,
pg_cap ? MLX5_IB_MTT_PRESENT : 0);
/* The MLX5_MKEY_INBOX_PG_ACCESS bit allows setting the access flags
/* The pg_access bit allows setting the access flags
* in the page list submitted with the command. */
in->flags = pg_cap ? cpu_to_be32(MLX5_MKEY_INBOX_PG_ACCESS) : 0;
in->seg.flags = convert_access(access_flags) |
MLX5_ACCESS_MODE_MTT;
in->seg.flags_pd = cpu_to_be32(to_mpd(pd)->pdn);
in->seg.start_addr = cpu_to_be64(virt_addr);
in->seg.len = cpu_to_be64(length);
in->seg.bsfs_octo_size = 0;
in->seg.xlt_oct_size = cpu_to_be32(get_octo_len(virt_addr, length, 1 << page_shift));
in->seg.log2_page_size = page_shift;
in->seg.qpn_mkey7_0 = cpu_to_be32(0xffffff << 8);
in->xlat_oct_act_size = cpu_to_be32(get_octo_len(virt_addr, length,
1 << page_shift));
err = mlx5_core_create_mkey(dev->mdev, &mr->mmkey, in, inlen, NULL,
NULL, NULL);
MLX5_SET(create_mkey_in, in, pg_access, !!(pg_cap));
mkc = MLX5_ADDR_OF(create_mkey_in, in, memory_key_mkey_entry);
MLX5_SET(mkc, mkc, access_mode, MLX5_MKC_ACCESS_MODE_MTT);
MLX5_SET(mkc, mkc, a, !!(access_flags & IB_ACCESS_REMOTE_ATOMIC));
MLX5_SET(mkc, mkc, rw, !!(access_flags & IB_ACCESS_REMOTE_WRITE));
MLX5_SET(mkc, mkc, rr, !!(access_flags & IB_ACCESS_REMOTE_READ));
MLX5_SET(mkc, mkc, lw, !!(access_flags & IB_ACCESS_LOCAL_WRITE));
MLX5_SET(mkc, mkc, lr, 1);
MLX5_SET64(mkc, mkc, start_addr, virt_addr);
MLX5_SET64(mkc, mkc, len, length);
MLX5_SET(mkc, mkc, pd, to_mpd(pd)->pdn);
MLX5_SET(mkc, mkc, bsf_octword_size, 0);
MLX5_SET(mkc, mkc, translations_octword_size,
get_octo_len(virt_addr, length, 1 << page_shift));
MLX5_SET(mkc, mkc, log_page_size, page_shift);
MLX5_SET(mkc, mkc, qpn, 0xffffff);
MLX5_SET(create_mkey_in, in, translations_octword_actual_size,
get_octo_len(virt_addr, length, 1 << page_shift));
err = mlx5_core_create_mkey(dev->mdev, &mr->mmkey, in, inlen);
if (err) {
mlx5_ib_warn(dev, "create mkey failed\n");
goto err_2;
@ -1523,30 +1540,32 @@ struct ib_mr *mlx5_ib_alloc_mr(struct ib_pd *pd,
u32 max_num_sg)
{
struct mlx5_ib_dev *dev = to_mdev(pd->device);
struct mlx5_create_mkey_mbox_in *in;
struct mlx5_ib_mr *mr;
int inlen = MLX5_ST_SZ_BYTES(create_mkey_in);
int ndescs = ALIGN(max_num_sg, 4);
struct mlx5_ib_mr *mr;
void *mkc;
u32 *in;
int err;
mr = kzalloc(sizeof(*mr), GFP_KERNEL);
if (!mr)
return ERR_PTR(-ENOMEM);
in = kzalloc(sizeof(*in), GFP_KERNEL);
in = kzalloc(inlen, GFP_KERNEL);
if (!in) {
err = -ENOMEM;
goto err_free;
}
in->seg.status = MLX5_MKEY_STATUS_FREE;
in->seg.xlt_oct_size = cpu_to_be32(ndescs);
in->seg.qpn_mkey7_0 = cpu_to_be32(0xffffff << 8);
in->seg.flags_pd = cpu_to_be32(to_mpd(pd)->pdn);
mkc = MLX5_ADDR_OF(create_mkey_in, in, memory_key_mkey_entry);
MLX5_SET(mkc, mkc, free, 1);
MLX5_SET(mkc, mkc, translations_octword_size, ndescs);
MLX5_SET(mkc, mkc, qpn, 0xffffff);
MLX5_SET(mkc, mkc, pd, to_mpd(pd)->pdn);
if (mr_type == IB_MR_TYPE_MEM_REG) {
mr->access_mode = MLX5_ACCESS_MODE_MTT;
in->seg.log2_page_size = PAGE_SHIFT;
mr->access_mode = MLX5_MKC_ACCESS_MODE_MTT;
MLX5_SET(mkc, mkc, log_page_size, PAGE_SHIFT);
err = mlx5_alloc_priv_descs(pd->device, mr,
ndescs, sizeof(u64));
if (err)
@ -1555,7 +1574,7 @@ struct ib_mr *mlx5_ib_alloc_mr(struct ib_pd *pd,
mr->desc_size = sizeof(u64);
mr->max_descs = ndescs;
} else if (mr_type == IB_MR_TYPE_SG_GAPS) {
mr->access_mode = MLX5_ACCESS_MODE_KLM;
mr->access_mode = MLX5_MKC_ACCESS_MODE_KLMS;
err = mlx5_alloc_priv_descs(pd->device, mr,
ndescs, sizeof(struct mlx5_klm));
@ -1566,9 +1585,8 @@ struct ib_mr *mlx5_ib_alloc_mr(struct ib_pd *pd,
} else if (mr_type == IB_MR_TYPE_SIGNATURE) {
u32 psv_index[2];
in->seg.flags_pd = cpu_to_be32(be32_to_cpu(in->seg.flags_pd) |
MLX5_MKEY_BSF_EN);
in->seg.bsfs_octo_size = cpu_to_be32(MLX5_MKEY_BSF_OCTO_SIZE);
MLX5_SET(mkc, mkc, bsf_en, 1);
MLX5_SET(mkc, mkc, bsf_octword_size, MLX5_MKEY_BSF_OCTO_SIZE);
mr->sig = kzalloc(sizeof(*mr->sig), GFP_KERNEL);
if (!mr->sig) {
err = -ENOMEM;
@ -1581,7 +1599,7 @@ struct ib_mr *mlx5_ib_alloc_mr(struct ib_pd *pd,
if (err)
goto err_free_sig;
mr->access_mode = MLX5_ACCESS_MODE_KLM;
mr->access_mode = MLX5_MKC_ACCESS_MODE_KLMS;
mr->sig->psv_memory.psv_idx = psv_index[0];
mr->sig->psv_wire.psv_idx = psv_index[1];
@ -1595,9 +1613,10 @@ struct ib_mr *mlx5_ib_alloc_mr(struct ib_pd *pd,
goto err_free_in;
}
in->seg.flags = MLX5_PERM_UMR_EN | mr->access_mode;
err = mlx5_core_create_mkey(dev->mdev, &mr->mmkey, in, sizeof(*in),
NULL, NULL, NULL);
MLX5_SET(mkc, mkc, access_mode, mr->access_mode);
MLX5_SET(mkc, mkc, umr_en, 1);
err = mlx5_core_create_mkey(dev->mdev, &mr->mmkey, in, inlen);
if (err)
goto err_destroy_psv;
@ -1633,8 +1652,10 @@ struct ib_mw *mlx5_ib_alloc_mw(struct ib_pd *pd, enum ib_mw_type type,
struct ib_udata *udata)
{
struct mlx5_ib_dev *dev = to_mdev(pd->device);
struct mlx5_create_mkey_mbox_in *in = NULL;
int inlen = MLX5_ST_SZ_BYTES(create_mkey_in);
struct mlx5_ib_mw *mw = NULL;
u32 *in = NULL;
void *mkc;
int ndescs;
int err;
struct mlx5_ib_alloc_mw req = {};
@ -1658,23 +1679,24 @@ struct ib_mw *mlx5_ib_alloc_mw(struct ib_pd *pd, enum ib_mw_type type,
ndescs = req.num_klms ? roundup(req.num_klms, 4) : roundup(1, 4);
mw = kzalloc(sizeof(*mw), GFP_KERNEL);
in = kzalloc(sizeof(*in), GFP_KERNEL);
in = kzalloc(inlen, GFP_KERNEL);
if (!mw || !in) {
err = -ENOMEM;
goto free;
}
in->seg.status = MLX5_MKEY_STATUS_FREE;
in->seg.xlt_oct_size = cpu_to_be32(ndescs);
in->seg.flags_pd = cpu_to_be32(to_mpd(pd)->pdn);
in->seg.flags = MLX5_PERM_UMR_EN | MLX5_ACCESS_MODE_KLM |
MLX5_PERM_LOCAL_READ;
if (type == IB_MW_TYPE_2)
in->seg.flags_pd |= cpu_to_be32(MLX5_MKEY_REMOTE_INVAL);
in->seg.qpn_mkey7_0 = cpu_to_be32(0xffffff << 8);
mkc = MLX5_ADDR_OF(create_mkey_in, in, memory_key_mkey_entry);
err = mlx5_core_create_mkey(dev->mdev, &mw->mmkey, in, sizeof(*in),
NULL, NULL, NULL);
MLX5_SET(mkc, mkc, free, 1);
MLX5_SET(mkc, mkc, translations_octword_size, ndescs);
MLX5_SET(mkc, mkc, pd, to_mpd(pd)->pdn);
MLX5_SET(mkc, mkc, umr_en, 1);
MLX5_SET(mkc, mkc, lr, 1);
MLX5_SET(mkc, mkc, access_mode, MLX5_MKC_ACCESS_MODE_KLMS);
MLX5_SET(mkc, mkc, en_rinval, !!((type == IB_MW_TYPE_2)));
MLX5_SET(mkc, mkc, qpn, 0xffffff);
err = mlx5_core_create_mkey(dev->mdev, &mw->mmkey, in, inlen);
if (err)
goto free;
@ -1811,7 +1833,7 @@ int mlx5_ib_map_mr_sg(struct ib_mr *ibmr, struct scatterlist *sg, int sg_nents,
mr->desc_size * mr->max_descs,
DMA_TO_DEVICE);
if (mr->access_mode == MLX5_ACCESS_MODE_KLM)
if (mr->access_mode == MLX5_MKC_ACCESS_MODE_KLMS)
n = mlx5_ib_sg_to_klms(mr, sg, sg_nents, sg_offset);
else
n = ib_sg_to_pages(ibmr, sg, sg_nents, sg_offset,

191
drivers/infiniband/hw/mlx5/qp.c
View File

@ -726,7 +726,7 @@ err_umem:
static int create_user_qp(struct mlx5_ib_dev *dev, struct ib_pd *pd,
struct mlx5_ib_qp *qp, struct ib_udata *udata,
struct ib_qp_init_attr *attr,
struct mlx5_create_qp_mbox_in **in,
u32 **in,
struct mlx5_ib_create_qp_resp *resp, int *inlen,
struct mlx5_ib_qp_base *base)
{
@ -739,6 +739,8 @@ static int create_user_qp(struct mlx5_ib_dev *dev, struct ib_pd *pd,
u32 offset = 0;
int uuarn;
int ncont = 0;
__be64 *pas;
void *qpc;
int err;
err = ib_copy_from_udata(&ucmd, udata, sizeof(ucmd));
@ -795,20 +797,24 @@ static int create_user_qp(struct mlx5_ib_dev *dev, struct ib_pd *pd,
ubuffer->umem = NULL;
}
*inlen = sizeof(**in) + sizeof(*(*in)->pas) * ncont;
*inlen = MLX5_ST_SZ_BYTES(create_qp_in) +
MLX5_FLD_SZ_BYTES(create_qp_in, pas[0]) * ncont;
*in = mlx5_vzalloc(*inlen);
if (!*in) {
err = -ENOMEM;
goto err_umem;
}
if (ubuffer->umem)
mlx5_ib_populate_pas(dev, ubuffer->umem, page_shift,
(*in)->pas, 0);
(*in)->ctx.log_pg_sz_remote_qpn =
cpu_to_be32((page_shift - MLX5_ADAPTER_PAGE_SHIFT) << 24);
(*in)->ctx.params2 = cpu_to_be32(offset << 6);
(*in)->ctx.qp_counter_set_usr_page = cpu_to_be32(uar_index);
pas = (__be64 *)MLX5_ADDR_OF(create_qp_in, *in, pas);
if (ubuffer->umem)
mlx5_ib_populate_pas(dev, ubuffer->umem, page_shift, pas, 0);
qpc = MLX5_ADDR_OF(create_qp_in, *in, qpc);
MLX5_SET(qpc, qpc, log_page_size, page_shift - MLX5_ADAPTER_PAGE_SHIFT);
MLX5_SET(qpc, qpc, page_offset, offset);
MLX5_SET(qpc, qpc, uar_page, uar_index);
resp->uuar_index = uuarn;
qp->uuarn = uuarn;
@ -857,12 +863,13 @@ static void destroy_qp_user(struct ib_pd *pd, struct mlx5_ib_qp *qp,
static int create_kernel_qp(struct mlx5_ib_dev *dev,
struct ib_qp_init_attr *init_attr,
struct mlx5_ib_qp *qp,
struct mlx5_create_qp_mbox_in **in, int *inlen,
u32 **in, int *inlen,
struct mlx5_ib_qp_base *base)
{
enum mlx5_ib_latency_class lc = MLX5_IB_LATENCY_CLASS_LOW;
struct mlx5_uuar_info *uuari;
int uar_index;
void *qpc;
int uuarn;
int err;
@ -902,25 +909,29 @@ static int create_kernel_qp(struct mlx5_ib_dev *dev,
}
qp->sq.qend = mlx5_get_send_wqe(qp, qp->sq.wqe_cnt);
*inlen = sizeof(**in) + sizeof(*(*in)->pas) * qp->buf.npages;
*inlen = MLX5_ST_SZ_BYTES(create_qp_in) +
MLX5_FLD_SZ_BYTES(create_qp_in, pas[0]) * qp->buf.npages;
*in = mlx5_vzalloc(*inlen);
if (!*in) {
err = -ENOMEM;
goto err_buf;
}
(*in)->ctx.qp_counter_set_usr_page = cpu_to_be32(uar_index);
(*in)->ctx.log_pg_sz_remote_qpn =
cpu_to_be32((qp->buf.page_shift - MLX5_ADAPTER_PAGE_SHIFT) << 24);
qpc = MLX5_ADDR_OF(create_qp_in, *in, qpc);
MLX5_SET(qpc, qpc, uar_page, uar_index);
MLX5_SET(qpc, qpc, log_page_size, qp->buf.page_shift - MLX5_ADAPTER_PAGE_SHIFT);
/* Set "fast registration enabled" for all kernel QPs */
(*in)->ctx.params1 |= cpu_to_be32(1 << 11);
(*in)->ctx.sq_crq_size |= cpu_to_be16(1 << 4);
MLX5_SET(qpc, qpc, fre, 1);
MLX5_SET(qpc, qpc, rlky, 1);
if (init_attr->create_flags & mlx5_ib_create_qp_sqpn_qp1()) {
(*in)->ctx.deth_sqpn = cpu_to_be32(1);
MLX5_SET(qpc, qpc, deth_sqpn, 1);
qp->flags |= MLX5_IB_QP_SQPN_QP1;
}
mlx5_fill_page_array(&qp->buf, (*in)->pas);
mlx5_fill_page_array(&qp->buf,
(__be64 *)MLX5_ADDR_OF(create_qp_in, *in, pas));
err = mlx5_db_alloc(dev->mdev, &qp->db);
if (err) {
@ -974,15 +985,15 @@ static void destroy_qp_kernel(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp)
free_uuar(&dev->mdev->priv.uuari, qp->bf->uuarn);
}
static __be32 get_rx_type(struct mlx5_ib_qp *qp, struct ib_qp_init_attr *attr)
static u32 get_rx_type(struct mlx5_ib_qp *qp, struct ib_qp_init_attr *attr)
{
if (attr->srq || (attr->qp_type == IB_QPT_XRC_TGT) ||
(attr->qp_type == IB_QPT_XRC_INI))
return cpu_to_be32(MLX5_SRQ_RQ);
return MLX5_SRQ_RQ;
else if (!qp->has_rq)
return cpu_to_be32(MLX5_ZERO_LEN_RQ);
return MLX5_ZERO_LEN_RQ;
else
return cpu_to_be32(MLX5_NON_ZERO_RQ);
return MLX5_NON_ZERO_RQ;
}
static int is_connected(enum ib_qp_type qp_type)
@ -996,13 +1007,10 @@ static int is_connected(enum ib_qp_type qp_type)
static int create_raw_packet_qp_tis(struct mlx5_ib_dev *dev,
struct mlx5_ib_sq *sq, u32 tdn)
{
u32 in[MLX5_ST_SZ_DW(create_tis_in)];
u32 in[MLX5_ST_SZ_DW(create_tis_in)] = {0};
void *tisc = MLX5_ADDR_OF(create_tis_in, in, ctx);
memset(in, 0, sizeof(in));
MLX5_SET(tisc, tisc, transport_domain, tdn);
return mlx5_core_create_tis(dev->mdev, in, sizeof(in), &sq->tisn);
}
@ -1191,7 +1199,7 @@ static void destroy_raw_packet_qp_tir(struct mlx5_ib_dev *dev,
}
static int create_raw_packet_qp(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp,
struct mlx5_create_qp_mbox_in *in,
u32 *in,
struct ib_pd *pd)
{
struct mlx5_ib_raw_packet_qp *raw_packet_qp = &qp->raw_packet_qp;
@ -1462,18 +1470,18 @@ static int create_qp_common(struct mlx5_ib_dev *dev, struct ib_pd *pd,
struct ib_udata *udata, struct mlx5_ib_qp *qp)
{
struct mlx5_ib_resources *devr = &dev->devr;
int inlen = MLX5_ST_SZ_BYTES(create_qp_in);
struct mlx5_core_dev *mdev = dev->mdev;
struct mlx5_ib_qp_base *base;
struct mlx5_ib_create_qp_resp resp;
struct mlx5_create_qp_mbox_in *in;
struct mlx5_ib_create_qp ucmd;
struct mlx5_ib_cq *send_cq;
struct mlx5_ib_cq *recv_cq;
unsigned long flags;
int inlen = sizeof(*in);
int err;
u32 uidx = MLX5_IB_DEFAULT_UIDX;
struct mlx5_ib_create_qp ucmd;
struct mlx5_ib_qp_base *base;
void *qpc;
u32 *in;
int err;
base = init_attr->qp_type == IB_QPT_RAW_PACKET ?
&qp->raw_packet_qp.rq.base :
@ -1601,7 +1609,7 @@ static int create_qp_common(struct mlx5_ib_dev *dev, struct ib_pd *pd,
if (err)
return err;
} else {
in = mlx5_vzalloc(sizeof(*in));
in = mlx5_vzalloc(inlen);
if (!in)
return -ENOMEM;
@ -1611,26 +1619,29 @@ static int create_qp_common(struct mlx5_ib_dev *dev, struct ib_pd *pd,
if (is_sqp(init_attr->qp_type))
qp->port = init_attr->port_num;
in->ctx.flags = cpu_to_be32(to_mlx5_st(init_attr->qp_type) << 16 |
MLX5_QP_PM_MIGRATED << 11);
qpc = MLX5_ADDR_OF(create_qp_in, in, qpc);
MLX5_SET(qpc, qpc, st, to_mlx5_st(init_attr->qp_type));
MLX5_SET(qpc, qpc, pm_state, MLX5_QP_PM_MIGRATED);
if (init_attr->qp_type != MLX5_IB_QPT_REG_UMR)
in->ctx.flags_pd = cpu_to_be32(to_mpd(pd ? pd : devr->p0)->pdn);
MLX5_SET(qpc, qpc, pd, to_mpd(pd ? pd : devr->p0)->pdn);
else
in->ctx.flags_pd = cpu_to_be32(MLX5_QP_LAT_SENSITIVE);
MLX5_SET(qpc, qpc, latency_sensitive, 1);
if (qp->wq_sig)
in->ctx.flags_pd |= cpu_to_be32(MLX5_QP_ENABLE_SIG);
MLX5_SET(qpc, qpc, wq_signature, 1);
if (qp->flags & MLX5_IB_QP_BLOCK_MULTICAST_LOOPBACK)
in->ctx.flags_pd |= cpu_to_be32(MLX5_QP_BLOCK_MCAST);
MLX5_SET(qpc, qpc, block_lb_mc, 1);
if (qp->flags & MLX5_IB_QP_CROSS_CHANNEL)
in->ctx.params2 |= cpu_to_be32(MLX5_QP_BIT_CC_MASTER);
MLX5_SET(qpc, qpc, cd_master, 1);
if (qp->flags & MLX5_IB_QP_MANAGED_SEND)
in->ctx.params2 |= cpu_to_be32(MLX5_QP_BIT_CC_SLAVE_SEND);
MLX5_SET(qpc, qpc, cd_slave_send, 1);
if (qp->flags & MLX5_IB_QP_MANAGED_RECV)
in->ctx.params2 |= cpu_to_be32(MLX5_QP_BIT_CC_SLAVE_RECV);
MLX5_SET(qpc, qpc, cd_slave_receive, 1);
if (qp->scat_cqe && is_connected(init_attr->qp_type)) {
int rcqe_sz;
@ -1640,71 +1651,68 @@ static int create_qp_common(struct mlx5_ib_dev *dev, struct ib_pd *pd,
scqe_sz = mlx5_ib_get_cqe_size(dev, init_attr->send_cq);
if (rcqe_sz == 128)
in->ctx.cs_res = MLX5_RES_SCAT_DATA64_CQE;
MLX5_SET(qpc, qpc, cs_res, MLX5_RES_SCAT_DATA64_CQE);
else
in->ctx.cs_res = MLX5_RES_SCAT_DATA32_CQE;
MLX5_SET(qpc, qpc, cs_res, MLX5_RES_SCAT_DATA32_CQE);
if (init_attr->sq_sig_type == IB_SIGNAL_ALL_WR) {
if (scqe_sz == 128)
in->ctx.cs_req = MLX5_REQ_SCAT_DATA64_CQE;
MLX5_SET(qpc, qpc, cs_req, MLX5_REQ_SCAT_DATA64_CQE);
else
in->ctx.cs_req = MLX5_REQ_SCAT_DATA32_CQE;
MLX5_SET(qpc, qpc, cs_req, MLX5_REQ_SCAT_DATA32_CQE);
}
}
if (qp->rq.wqe_cnt) {
in->ctx.rq_size_stride = (qp->rq.wqe_shift - 4);
in->ctx.rq_size_stride |= ilog2(qp->rq.wqe_cnt) << 3;
MLX5_SET(qpc, qpc, log_rq_stride, qp->rq.wqe_shift - 4);
MLX5_SET(qpc, qpc, log_rq_size, ilog2(qp->rq.wqe_cnt));
}
in->ctx.rq_type_srqn = get_rx_type(qp, init_attr);
MLX5_SET(qpc, qpc, rq_type, get_rx_type(qp, init_attr));
if (qp->sq.wqe_cnt)
in->ctx.sq_crq_size |= cpu_to_be16(ilog2(qp->sq.wqe_cnt) << 11);
MLX5_SET(qpc, qpc, log_sq_size, ilog2(qp->sq.wqe_cnt));
else
in->ctx.sq_crq_size |= cpu_to_be16(0x8000);
MLX5_SET(qpc, qpc, no_sq, 1);
/* Set default resources */
switch (init_attr->qp_type) {
case IB_QPT_XRC_TGT:
in->ctx.cqn_recv = cpu_to_be32(to_mcq(devr->c0)->mcq.cqn);
in->ctx.cqn_send = cpu_to_be32(to_mcq(devr->c0)->mcq.cqn);
in->ctx.rq_type_srqn |= cpu_to_be32(to_msrq(devr->s0)->msrq.srqn);
in->ctx.xrcd = cpu_to_be32(to_mxrcd(init_attr->xrcd)->xrcdn);
MLX5_SET(qpc, qpc, cqn_rcv, to_mcq(devr->c0)->mcq.cqn);
MLX5_SET(qpc, qpc, cqn_snd, to_mcq(devr->c0)->mcq.cqn);
MLX5_SET(qpc, qpc, srqn_rmpn_xrqn, to_msrq(devr->s0)->msrq.srqn);
MLX5_SET(qpc, qpc, xrcd, to_mxrcd(init_attr->xrcd)->xrcdn);
break;
case IB_QPT_XRC_INI:
in->ctx.cqn_recv = cpu_to_be32(to_mcq(devr->c0)->mcq.cqn);
in->ctx.xrcd = cpu_to_be32(to_mxrcd(devr->x1)->xrcdn);
in->ctx.rq_type_srqn |= cpu_to_be32(to_msrq(devr->s0)->msrq.srqn);
MLX5_SET(qpc, qpc, cqn_rcv, to_mcq(devr->c0)->mcq.cqn);
MLX5_SET(qpc, qpc, xrcd, to_mxrcd(devr->x1)->xrcdn);
MLX5_SET(qpc, qpc, srqn_rmpn_xrqn, to_msrq(devr->s0)->msrq.srqn);
break;
default:
if (init_attr->srq) {
in->ctx.xrcd = cpu_to_be32(to_mxrcd(devr->x0)->xrcdn);
in->ctx.rq_type_srqn |= cpu_to_be32(to_msrq(init_attr->srq)->msrq.srqn);
MLX5_SET(qpc, qpc, xrcd, to_mxrcd(devr->x0)->xrcdn);
MLX5_SET(qpc, qpc, srqn_rmpn_xrqn, to_msrq(init_attr->srq)->msrq.srqn);
} else {
in->ctx.xrcd = cpu_to_be32(to_mxrcd(devr->x1)->xrcdn);
in->ctx.rq_type_srqn |=
cpu_to_be32(to_msrq(devr->s1)->msrq.srqn);
MLX5_SET(qpc, qpc, xrcd, to_mxrcd(devr->x1)->xrcdn);
MLX5_SET(qpc, qpc, srqn_rmpn_xrqn, to_msrq(devr->s1)->msrq.srqn);
}
}
if (init_attr->send_cq)
in->ctx.cqn_send = cpu_to_be32(to_mcq(init_attr->send_cq)->mcq.cqn);
MLX5_SET(qpc, qpc, cqn_snd, to_mcq(init_attr->send_cq)->mcq.cqn);
if (init_attr->recv_cq)
in->ctx.cqn_recv = cpu_to_be32(to_mcq(init_attr->recv_cq)->mcq.cqn);
MLX5_SET(qpc, qpc, cqn_rcv, to_mcq(init_attr->recv_cq)->mcq.cqn);
in->ctx.db_rec_addr = cpu_to_be64(qp->db.dma);
MLX5_SET64(qpc, qpc, dbr_addr, qp->db.dma);
if (MLX5_CAP_GEN(mdev, cqe_version) == MLX5_CQE_VERSION_V1) {
qpc = MLX5_ADDR_OF(create_qp_in, in, qpc);
/* 0xffffff means we ask to work with cqe version 0 */
/* 0xffffff means we ask to work with cqe version 0 */
if (MLX5_CAP_GEN(mdev, cqe_version) == MLX5_CQE_VERSION_V1)
MLX5_SET(qpc, qpc, user_index, uidx);
}
/* we use IB_QP_CREATE_IPOIB_UD_LSO to indicates ipoib qp */
if (init_attr->qp_type == IB_QPT_UD &&
(init_attr->create_flags & IB_QP_CREATE_IPOIB_UD_LSO)) {
qpc = MLX5_ADDR_OF(create_qp_in, in, qpc);
MLX5_SET(qpc, qpc, ulp_stateless_offload_mode, 1);
qp->flags |= MLX5_IB_QP_LSO;
}
@ -1861,7 +1869,6 @@ static void destroy_qp_common(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp)
{
struct mlx5_ib_cq *send_cq, *recv_cq;
struct mlx5_ib_qp_base *base = &qp->trans_qp.base;
struct mlx5_modify_qp_mbox_in *in;
unsigned long flags;
int err;
@ -1874,16 +1881,12 @@ static void destroy_qp_common(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp)
&qp->raw_packet_qp.rq.base :
&qp->trans_qp.base;
in = kzalloc(sizeof(*in), GFP_KERNEL);
if (!in)
return;
if (qp->state != IB_QPS_RESET) {
if (qp->ibqp.qp_type != IB_QPT_RAW_PACKET) {
mlx5_ib_qp_disable_pagefaults(qp);
err = mlx5_core_qp_modify(dev->mdev,
MLX5_CMD_OP_2RST_QP, in, 0,
&base->mqp);
MLX5_CMD_OP_2RST_QP, 0,
NULL, &base->mqp);
} else {
err = modify_raw_packet_qp(dev, qp,
MLX5_CMD_OP_2RST_QP);
@ -1925,8 +1928,6 @@ static void destroy_qp_common(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp)
base->mqp.qpn);
}
kfree(in);
if (qp->create_type == MLX5_QP_KERNEL)
destroy_qp_kernel(dev, qp);
else if (qp->create_type == MLX5_QP_USER)
@ -2512,7 +2513,6 @@ static int __mlx5_ib_modify_qp(struct ib_qp *ibqp,
struct mlx5_ib_qp_base *base = &qp->trans_qp.base;
struct mlx5_ib_cq *send_cq, *recv_cq;
struct mlx5_qp_context *context;
struct mlx5_modify_qp_mbox_in *in;
struct mlx5_ib_pd *pd;
enum mlx5_qp_state mlx5_cur, mlx5_new;
enum mlx5_qp_optpar optpar;
@ -2521,11 +2521,10 @@ static int __mlx5_ib_modify_qp(struct ib_qp *ibqp,
int err;
u16 op;
in = kzalloc(sizeof(*in), GFP_KERNEL);
if (!in)
context = kzalloc(sizeof(*context), GFP_KERNEL);
if (!context)
return -ENOMEM;
context = &in->ctx;
err = to_mlx5_st(ibqp->qp_type);
if (err < 0) {
mlx5_ib_dbg(dev, "unsupported qp type %d\n", ibqp->qp_type);
@ -2690,12 +2689,11 @@ static int __mlx5_ib_modify_qp(struct ib_qp *ibqp,
op = optab[mlx5_cur][mlx5_new];
optpar = ib_mask_to_mlx5_opt(attr_mask);
optpar &= opt_mask[mlx5_cur][mlx5_new][mlx5_st];
in->optparam = cpu_to_be32(optpar);
if (qp->ibqp.qp_type == IB_QPT_RAW_PACKET)
err = modify_raw_packet_qp(dev, qp, op);
else
err = mlx5_core_qp_modify(dev->mdev, op, in, sqd_event,
err = mlx5_core_qp_modify(dev->mdev, op, optpar, context,
&base->mqp);
if (err)
goto out;
@ -2736,7 +2734,7 @@ static int __mlx5_ib_modify_qp(struct ib_qp *ibqp,
}
out:
kfree(in);
kfree(context);
return err;
}
@ -2969,7 +2967,7 @@ static void set_reg_umr_seg(struct mlx5_wqe_umr_ctrl_seg *umr,
memset(umr, 0, sizeof(*umr));
if (mr->access_mode == MLX5_ACCESS_MODE_KLM)
if (mr->access_mode == MLX5_MKC_ACCESS_MODE_KLMS)
/* KLMs take twice the size of MTTs */
ndescs *= 2;
@ -3112,9 +3110,9 @@ static void set_reg_mkey_seg(struct mlx5_mkey_seg *seg,
memset(seg, 0, sizeof(*seg));
if (mr->access_mode == MLX5_ACCESS_MODE_MTT)
if (mr->access_mode == MLX5_MKC_ACCESS_MODE_MTT)
seg->log2_page_size = ilog2(mr->ibmr.page_size);
else if (mr->access_mode == MLX5_ACCESS_MODE_KLM)
else if (mr->access_mode == MLX5_MKC_ACCESS_MODE_KLMS)
/* KLMs take twice the size of MTTs */
ndescs *= 2;
@ -3455,7 +3453,7 @@ static void set_sig_mkey_segment(struct mlx5_mkey_seg *seg,
memset(seg, 0, sizeof(*seg));
seg->flags = get_umr_flags(wr->access_flags) |
MLX5_ACCESS_MODE_KLM;
MLX5_MKC_ACCESS_MODE_KLMS;
seg->qpn_mkey7_0 = cpu_to_be32((sig_key & 0xff) | 0xffffff00);
seg->flags_pd = cpu_to_be32(MLX5_MKEY_REMOTE_INVAL | sigerr << 26 |
MLX5_MKEY_BSF_EN | pdn);
@ -4317,21 +4315,24 @@ static int query_raw_packet_qp_state(struct mlx5_ib_dev *dev,
static int query_qp_attr(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp,
struct ib_qp_attr *qp_attr)
{
struct mlx5_query_qp_mbox_out *outb;
int outlen = MLX5_ST_SZ_BYTES(query_qp_out);
struct mlx5_qp_context *context;
int mlx5_state;
u32 *outb;
int err = 0;
outb = kzalloc(sizeof(*outb), GFP_KERNEL);
outb = kzalloc(outlen, GFP_KERNEL);
if (!outb)
return -ENOMEM;
context = &outb->ctx;
err = mlx5_core_qp_query(dev->mdev, &qp->trans_qp.base.mqp, outb,
sizeof(*outb));
outlen);
if (err)
goto out;
/* FIXME: use MLX5_GET rather than mlx5_qp_context manual struct */
context = (struct mlx5_qp_context *)MLX5_ADDR_OF(query_qp_out, outb, qpc);
mlx5_state = be32_to_cpu(context->flags) >> 28;
qp->state = to_ib_qp_state(mlx5_state);

6
drivers/isdn/hardware/mISDN/avmfritz.c
View File

@ -284,7 +284,7 @@ __write_ctrl_pciv2(struct fritzcard *fc, struct hdlc_hw *hdlc, u32 channel) {
AVM_HDLC_STATUS_1));
}
void
static void
write_ctrl(struct bchannel *bch, int which) {
struct fritzcard *fc = bch->hw;
struct hdlc_hw *hdlc;
@ -741,7 +741,7 @@ inithdlc(struct fritzcard *fc)
modehdlc(&fc->bch[1], -1);
}
void
static void
clear_pending_hdlc_ints(struct fritzcard *fc)
{
u32 val;
@ -962,7 +962,7 @@ avm_dctrl(struct mISDNchannel *ch, u32 cmd, void *arg)
return err;
}
int
static int
setup_fritz(struct fritzcard *fc)
{
u32 val, ver;

24
drivers/isdn/hardware/mISDN/hfcmulti.c
View File

@ -564,19 +564,19 @@ disable_hwirq(struct hfc_multi *hc)
#define MAX_TDM_CHAN 32
inline void
static inline void
enablepcibridge(struct hfc_multi *c)
{
HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x3); /* was _io before */
}
inline void
static inline void
disablepcibridge(struct hfc_multi *c)
{
HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x2); /* was _io before */
}
inline unsigned char
static inline unsigned char
readpcibridge(struct hfc_multi *hc, unsigned char address)
{
unsigned short cipv;
@ -604,7 +604,7 @@ readpcibridge(struct hfc_multi *hc, unsigned char address)
return data;
}
inline void
static inline void
writepcibridge(struct hfc_multi *hc, unsigned char address, unsigned char data)
{
unsigned short cipv;
@ -634,14 +634,14 @@ writepcibridge(struct hfc_multi *hc, unsigned char address, unsigned char data)
outl(datav, hc->pci_iobase);
}
inline void
static inline void
cpld_set_reg(struct hfc_multi *hc, unsigned char reg)
{
/* Do data pin read low byte */
HFC_outb(hc, R_GPIO_OUT1, reg);
}
inline void
static inline void
cpld_write_reg(struct hfc_multi *hc, unsigned char reg, unsigned char val)
{
cpld_set_reg(hc, reg);
@ -653,7 +653,7 @@ cpld_write_reg(struct hfc_multi *hc, unsigned char reg, unsigned char val)
return;
}
inline unsigned char
static inline unsigned char
cpld_read_reg(struct hfc_multi *hc, unsigned char reg)
{
unsigned char bytein;
@ -670,14 +670,14 @@ cpld_read_reg(struct hfc_multi *hc, unsigned char reg)
return bytein;
}
inline void
static inline void
vpm_write_address(struct hfc_multi *hc, unsigned short addr)
{
cpld_write_reg(hc, 0, 0xff & addr);
cpld_write_reg(hc, 1, 0x01 & (addr >> 8));
}
inline unsigned short
static inline unsigned short
vpm_read_address(struct hfc_multi *c)
{
unsigned short addr;
@ -691,7 +691,7 @@ vpm_read_address(struct hfc_multi *c)
return addr & 0x1ff;
}
inline unsigned char
static inline unsigned char
vpm_in(struct hfc_multi *c, int which, unsigned short addr)
{
unsigned char res;
@ -712,7 +712,7 @@ vpm_in(struct hfc_multi *c, int which, unsigned short addr)
return res;
}
inline void
static inline void
vpm_out(struct hfc_multi *c, int which, unsigned short addr,
unsigned char data)
{
@ -1024,7 +1024,7 @@ hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm)
}
/* This must be called AND hc must be locked irqsave!!! */
inline void
static inline void
plxsd_checksync(struct hfc_multi *hc, int rm)
{
if (hc->syncronized) {

2
drivers/isdn/hardware/mISDN/mISDNipac.c
View File

@ -113,7 +113,7 @@ isac_ph_state_bh(struct dchannel *dch)
pr_debug("%s: TE newstate %x\n", isac->name, dch->state);
}
void
static void
isac_empty_fifo(struct isac_hw *isac, int count)
{
u8 *ptr;

2
drivers/isdn/hardware/mISDN/w6692.c
View File

@ -848,7 +848,7 @@ dbusy_timer_handler(struct dchannel *dch)
}
}
void initW6692(struct w6692_hw *card)
static void initW6692(struct w6692_hw *card)
{
u8 val;

2
drivers/net/Kconfig
View File

@ -149,6 +149,8 @@ config IPVLAN
tristate "IP-VLAN support"
depends on INET
depends on IPV6
depends on NETFILTER
depends on NET_L3_MASTER_DEV
---help---
This allows one to create virtual devices off of a main interface
and packets will be delivered based on the dest L3 (IPv6/IPv4 addr)

2
drivers/net/bonding/bond_main.c
View File

@ -4628,7 +4628,7 @@ static int bond_init(struct net_device *bond_dev)
netdev_dbg(bond_dev, "Begin bond_init\n");
bond->wq = create_singlethread_workqueue(bond_dev->name);
bond->wq = alloc_ordered_workqueue(bond_dev->name, WQ_MEM_RECLAIM);
if (!bond->wq)
return -ENOMEM;

9
drivers/net/can/usb/ems_usb.c
View File

@ -600,7 +600,6 @@ static int ems_usb_start(struct ems_usb *dev)
/* create a URB, and a buffer for it */
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
netdev_err(netdev, "No memory left for URBs\n");
err = -ENOMEM;
break;
}
@ -752,10 +751,8 @@ static netdev_tx_t ems_usb_start_xmit(struct sk_buff *skb, struct net_device *ne
/* create a URB, and a buffer for it, and copy the data to the URB */
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
netdev_err(netdev, "No memory left for URBs\n");
if (!urb)
goto nomem;
}
buf = usb_alloc_coherent(dev->udev, size, GFP_ATOMIC, &urb->transfer_dma);
if (!buf) {
@ -1007,10 +1004,8 @@ static int ems_usb_probe(struct usb_interface *intf,
dev->tx_contexts[i].echo_index = MAX_TX_URBS;
dev->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!dev->intr_urb) {
dev_err(&intf->dev, "Couldn't alloc intr URB\n");
if (!dev->intr_urb)
goto cleanup_candev;
}
dev->intr_in_buffer = kzalloc(INTR_IN_BUFFER_SIZE, GFP_KERNEL);
if (!dev->intr_in_buffer)

3
drivers/net/can/usb/esd_usb2.c
View File

@ -558,8 +558,6 @@ static int esd_usb2_setup_rx_urbs(struct esd_usb2 *dev)
/* create a URB, and a buffer for it */
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
dev_warn(dev->udev->dev.parent,
"No memory left for URBs\n");
err = -ENOMEM;
break;
}
@ -730,7 +728,6 @@ static netdev_tx_t esd_usb2_start_xmit(struct sk_buff *skb,
/* create a URB, and a buffer for it, and copy the data to the URB */
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
netdev_err(netdev, "No memory left for URBs\n");
stats->tx_dropped++;
dev_kfree_skb(skb);
goto nourbmem;

9
drivers/net/can/usb/gs_usb.c
View File

@ -493,10 +493,8 @@ static netdev_tx_t gs_can_start_xmit(struct sk_buff *skb,
/* create a URB, and a buffer for it */
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
netdev_err(netdev, "No memory left for URB\n");
if (!urb)
goto nomem_urb;
}
hf = usb_alloc_coherent(dev->udev, sizeof(*hf), GFP_ATOMIC,
&urb->transfer_dma);
@ -600,11 +598,8 @@ static int gs_can_open(struct net_device *netdev)
/* alloc rx urb */
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
netdev_err(netdev,
"No memory left for URB\n");
if (!urb)
return -ENOMEM;
}
/* alloc rx buffer */
buf = usb_alloc_coherent(dev->udev,

7
drivers/net/can/usb/kvaser_usb.c
View File

@ -787,10 +787,8 @@ static int kvaser_usb_simple_msg_async(struct kvaser_usb_net_priv *priv,
int err;
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
netdev_err(netdev, "No memory left for URBs\n");
if (!urb)
return -ENOMEM;
}
buf = kmalloc(sizeof(struct kvaser_msg), GFP_ATOMIC);
if (!buf) {
@ -1393,8 +1391,6 @@ static int kvaser_usb_setup_rx_urbs(struct kvaser_usb *dev)
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
dev_warn(dev->udev->dev.parent,
"No memory left for URBs\n");
err = -ENOMEM;
break;
}
@ -1670,7 +1666,6 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb,
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
netdev_err(netdev, "No memory left for URBs\n");
stats->tx_dropped++;
dev_kfree_skb(skb);
return NETDEV_TX_OK;

6
drivers/net/can/usb/peak_usb/pcan_usb_core.c
View File

@ -399,7 +399,6 @@ static int peak_usb_start(struct peak_usb_device *dev)
/* create a URB, and a buffer for it, to receive usb messages */
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
netdev_err(netdev, "No memory left for URBs\n");
err = -ENOMEM;
break;
}
@ -454,7 +453,6 @@ static int peak_usb_start(struct peak_usb_device *dev)
/* create a URB and a buffer for it, to transmit usb messages */
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
netdev_err(netdev, "No memory left for URBs\n");
err = -ENOMEM;
break;
}
@ -651,10 +649,8 @@ static int peak_usb_restart(struct peak_usb_device *dev)
/* first allocate a urb to handle the asynchronous steps */
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
netdev_err(dev->netdev, "no memory left for urb\n");
if (!urb)
return -ENOMEM;
}
/* also allocate enough space for the commands to send */
buf = kmalloc(PCAN_USB_MAX_CMD_LEN, GFP_ATOMIC);

5
drivers/net/can/usb/usb_8dev.c
View File

@ -623,10 +623,8 @@ static netdev_tx_t usb_8dev_start_xmit(struct sk_buff *skb,
/* create a URB, and a buffer for it, and copy the data to the URB */
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
netdev_err(netdev, "No memory left for URBs\n");
if (!urb)
goto nomem;
}
buf = usb_alloc_coherent(priv->udev, size, GFP_ATOMIC,
&urb->transfer_dma);
@ -748,7 +746,6 @@ static int usb_8dev_start(struct usb_8dev_priv *priv)
/* create a URB, and a buffer for it */
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
netdev_err(netdev, "No memory left for URBs\n");
err = -ENOMEM;
break;
}

10
drivers/net/dsa/Kconfig
View File

@ -16,6 +16,7 @@ config NET_DSA_BCM_SF2
select FIXED_PHY
select BCM7XXX_PHY
select MDIO_BCM_UNIMAC
select B53
---help---
This enables support for the Broadcom Starfighter 2 Ethernet
switch chips.
@ -24,4 +25,13 @@ source "drivers/net/dsa/b53/Kconfig"
source "drivers/net/dsa/mv88e6xxx/Kconfig"
config NET_DSA_QCA8K
tristate "Qualcomm Atheros QCA8K Ethernet switch family support"
depends on NET_DSA
select NET_DSA_TAG_QCA
select REGMAP
---help---
This enables support for the Qualcomm Atheros QCA8K Ethernet
switch chips.
endmenu

1
drivers/net/dsa/Makefile
View File

@ -1,5 +1,6 @@
obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm_sf2.o
obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o
obj-y += b53/
obj-y += mv88e6xxx/

199
drivers/net/dsa/b53/b53_common.c
View File

@ -167,6 +167,65 @@ static const struct b53_mib_desc b53_mibs[] = {
#define B53_MIBS_SIZE ARRAY_SIZE(b53_mibs)
static const struct b53_mib_desc b53_mibs_58xx[] = {
{ 8, 0x00, "TxOctets" },
{ 4, 0x08, "TxDropPkts" },
{ 4, 0x0c, "TxQPKTQ0" },
{ 4, 0x10, "TxBroadcastPkts" },
{ 4, 0x14, "TxMulticastPkts" },
{ 4, 0x18, "TxUnicastPKts" },
{ 4, 0x1c, "TxCollisions" },
{ 4, 0x20, "TxSingleCollision" },
{ 4, 0x24, "TxMultipleCollision" },
{ 4, 0x28, "TxDeferredCollision" },
{ 4, 0x2c, "TxLateCollision" },
{ 4, 0x30, "TxExcessiveCollision" },
{ 4, 0x34, "TxFrameInDisc" },
{ 4, 0x38, "TxPausePkts" },
{ 4, 0x3c, "TxQPKTQ1" },
{ 4, 0x40, "TxQPKTQ2" },
{ 4, 0x44, "TxQPKTQ3" },
{ 4, 0x48, "TxQPKTQ4" },
{ 4, 0x4c, "TxQPKTQ5" },
{ 8, 0x50, "RxOctets" },
{ 4, 0x58, "RxUndersizePkts" },
{ 4, 0x5c, "RxPausePkts" },
{ 4, 0x60, "RxPkts64Octets" },
{ 4, 0x64, "RxPkts65to127Octets" },
{ 4, 0x68, "RxPkts128to255Octets" },
{ 4, 0x6c, "RxPkts256to511Octets" },
{ 4, 0x70, "RxPkts512to1023Octets" },
{ 4, 0x74, "RxPkts1024toMaxPktsOctets" },
{ 4, 0x78, "RxOversizePkts" },
{ 4, 0x7c, "RxJabbers" },
{ 4, 0x80, "RxAlignmentErrors" },
{ 4, 0x84, "RxFCSErrors" },
{ 8, 0x88, "RxGoodOctets" },
{ 4, 0x90, "RxDropPkts" },
{ 4, 0x94, "RxUnicastPkts" },
{ 4, 0x98, "RxMulticastPkts" },
{ 4, 0x9c, "RxBroadcastPkts" },
{ 4, 0xa0, "RxSAChanges" },
{ 4, 0xa4, "RxFragments" },
{ 4, 0xa8, "RxJumboPkt" },
{ 4, 0xac, "RxSymblErr" },
{ 4, 0xb0, "InRangeErrCount" },
{ 4, 0xb4, "OutRangeErrCount" },
{ 4, 0xb8, "EEELpiEvent" },
{ 4, 0xbc, "EEELpiDuration" },
{ 4, 0xc0, "RxDiscard" },
{ 4, 0xc8, "TxQPKTQ6" },
{ 4, 0xcc, "TxQPKTQ7" },
{ 4, 0xd0, "TxPkts64Octets" },
{ 4, 0xd4, "TxPkts65to127Octets" },
{ 4, 0xd8, "TxPkts128to255Octets" },
{ 4, 0xdc, "TxPkts256to511Ocets" },
{ 4, 0xe0, "TxPkts512to1023Ocets" },
{ 4, 0xe4, "TxPkts1024toMaxPktOcets" },
};
#define B53_MIBS_58XX_SIZE ARRAY_SIZE(b53_mibs_58xx)
static int b53_do_vlan_op(struct b53_device *dev, u8 op)
{
unsigned int i;
@ -418,7 +477,7 @@ static int b53_fast_age_vlan(struct b53_device *dev, u16 vid)
static void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
{
struct b53_device *dev = ds_to_priv(ds);
struct b53_device *dev = ds->priv;
unsigned int i;
u16 pvlan;
@ -436,7 +495,7 @@ static void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
static int b53_enable_port(struct dsa_switch *ds, int port,
struct phy_device *phy)
{
struct b53_device *dev = ds_to_priv(ds);
struct b53_device *dev = ds->priv;
unsigned int cpu_port = dev->cpu_port;
u16 pvlan;
@ -461,7 +520,7 @@ static int b53_enable_port(struct dsa_switch *ds, int port,
static void b53_disable_port(struct dsa_switch *ds, int port,
struct phy_device *phy)
{
struct b53_device *dev = ds_to_priv(ds);
struct b53_device *dev = ds->priv;
u8 reg;
/* Disable Tx/Rx for the port */
@ -570,7 +629,7 @@ static int b53_switch_reset(struct b53_device *dev)
static int b53_phy_read16(struct dsa_switch *ds, int addr, int reg)
{
struct b53_device *priv = ds_to_priv(ds);
struct b53_device *priv = ds->priv;
u16 value = 0;
int ret;
@ -585,7 +644,7 @@ static int b53_phy_read16(struct dsa_switch *ds, int addr, int reg)
static int b53_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
{
struct b53_device *priv = ds_to_priv(ds);
struct b53_device *priv = ds->priv;
if (priv->ops->phy_write16)
return priv->ops->phy_write16(priv, addr, reg, val);
@ -635,6 +694,8 @@ static const struct b53_mib_desc *b53_get_mib(struct b53_device *dev)
return b53_mibs_65;
else if (is63xx(dev))
return b53_mibs_63xx;
else if (is58xx(dev))
return b53_mibs_58xx;
else
return b53_mibs;
}
@ -645,13 +706,15 @@ static unsigned int b53_get_mib_size(struct b53_device *dev)
return B53_MIBS_65_SIZE;
else if (is63xx(dev))
return B53_MIBS_63XX_SIZE;
else if (is58xx(dev))
return B53_MIBS_58XX_SIZE;
else
return B53_MIBS_SIZE;
}
static void b53_get_strings(struct dsa_switch *ds, int port, uint8_t *data)
{
struct b53_device *dev = ds_to_priv(ds);
struct b53_device *dev = ds->priv;
const struct b53_mib_desc *mibs = b53_get_mib(dev);
unsigned int mib_size = b53_get_mib_size(dev);
unsigned int i;
@ -664,7 +727,7 @@ static void b53_get_strings(struct dsa_switch *ds, int port, uint8_t *data)
static void b53_get_ethtool_stats(struct dsa_switch *ds, int port,
uint64_t *data)
{
struct b53_device *dev = ds_to_priv(ds);
struct b53_device *dev = ds->priv;
const struct b53_mib_desc *mibs = b53_get_mib(dev);
unsigned int mib_size = b53_get_mib_size(dev);
const struct b53_mib_desc *s;
@ -696,19 +759,14 @@ static void b53_get_ethtool_stats(struct dsa_switch *ds, int port,
static int b53_get_sset_count(struct dsa_switch *ds)
{
struct b53_device *dev = ds_to_priv(ds);
struct b53_device *dev = ds->priv;
return b53_get_mib_size(dev);
}
static int b53_set_addr(struct dsa_switch *ds, u8 *addr)
{
return 0;
}
static int b53_setup(struct dsa_switch *ds)
{
struct b53_device *dev = ds_to_priv(ds);
struct b53_device *dev = ds->priv;
unsigned int port;
int ret;
@ -739,7 +797,7 @@ static int b53_setup(struct dsa_switch *ds)
static void b53_adjust_link(struct dsa_switch *ds, int port,
struct phy_device *phydev)
{
struct b53_device *dev = ds_to_priv(ds);
struct b53_device *dev = ds->priv;
u8 rgmii_ctrl = 0, reg = 0, off;
if (!phy_is_pseudo_fixed_link(phydev))
@ -873,7 +931,7 @@ static int b53_vlan_prepare(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan,
struct switchdev_trans *trans)
{
struct b53_device *dev = ds_to_priv(ds);
struct b53_device *dev = ds->priv;
if ((is5325(dev) || is5365(dev)) && vlan->vid_begin == 0)
return -EOPNOTSUPP;
@ -890,7 +948,7 @@ static void b53_vlan_add(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan,
struct switchdev_trans *trans)
{
struct b53_device *dev = ds_to_priv(ds);
struct b53_device *dev = ds->priv;
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
unsigned int cpu_port = dev->cpu_port;
@ -924,7 +982,7 @@ static void b53_vlan_add(struct dsa_switch *ds, int port,
static int b53_vlan_del(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan)
{
struct b53_device *dev = ds_to_priv(ds);
struct b53_device *dev = ds->priv;
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
unsigned int cpu_port = dev->cpu_port;
struct b53_vlan *vl;
@ -970,7 +1028,7 @@ static int b53_vlan_dump(struct dsa_switch *ds, int port,
struct switchdev_obj_port_vlan *vlan,
int (*cb)(struct switchdev_obj *obj))
{
struct b53_device *dev = ds_to_priv(ds);
struct b53_device *dev = ds->priv;
u16 vid, vid_start = 0, pvid;
struct b53_vlan *vl;
int err = 0;
@ -1129,7 +1187,7 @@ static int b53_fdb_prepare(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_fdb *fdb,
struct switchdev_trans *trans)
{
struct b53_device *priv = ds_to_priv(ds);
struct b53_device *priv = ds->priv;
/* 5325 and 5365 require some more massaging, but could
* be supported eventually
@ -1144,7 +1202,7 @@ static void b53_fdb_add(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_fdb *fdb,
struct switchdev_trans *trans)
{
struct b53_device *priv = ds_to_priv(ds);
struct b53_device *priv = ds->priv;
if (b53_arl_op(priv, 0, port, fdb->addr, fdb->vid, true))
pr_err("%s: failed to add MAC address\n", __func__);
@ -1153,7 +1211,7 @@ static void b53_fdb_add(struct dsa_switch *ds, int port,
static int b53_fdb_del(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_fdb *fdb)
{
struct b53_device *priv = ds_to_priv(ds);
struct b53_device *priv = ds->priv;
return b53_arl_op(priv, 0, port, fdb->addr, fdb->vid, false);
}
@ -1212,7 +1270,7 @@ static int b53_fdb_dump(struct dsa_switch *ds, int port,
struct switchdev_obj_port_fdb *fdb,
int (*cb)(struct switchdev_obj *obj))
{
struct b53_device *priv = ds_to_priv(ds);
struct b53_device *priv = ds->priv;
struct net_device *dev = ds->ports[port].netdev;
struct b53_arl_entry results[2];
unsigned int count = 0;
@ -1251,10 +1309,22 @@ static int b53_fdb_dump(struct dsa_switch *ds, int port,
static int b53_br_join(struct dsa_switch *ds, int port,
struct net_device *bridge)
{
struct b53_device *dev = ds_to_priv(ds);
struct b53_device *dev = ds->priv;
s8 cpu_port = ds->dst->cpu_port;
u16 pvlan, reg;
unsigned int i;
/* Make this port leave the all VLANs join since we will have proper
* VLAN entries from now on
*/
if (is58xx(dev)) {
b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, &reg);
reg &= ~BIT(port);
if ((reg & BIT(cpu_port)) == BIT(cpu_port))
reg &= ~BIT(cpu_port);
b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
}
dev->ports[port].bridge_dev = bridge;
b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
@ -1284,9 +1354,10 @@ static int b53_br_join(struct dsa_switch *ds, int port,
static void b53_br_leave(struct dsa_switch *ds, int port)
{
struct b53_device *dev = ds_to_priv(ds);
struct b53_device *dev = ds->priv;
struct net_device *bridge = dev->ports[port].bridge_dev;
struct b53_vlan *vl = &dev->vlans[0];
s8 cpu_port = ds->dst->cpu_port;
unsigned int i;
u16 pvlan, reg, pvid;
@ -1316,22 +1387,27 @@ static void b53_br_leave(struct dsa_switch *ds, int port)
else
pvid = 0;
b53_get_vlan_entry(dev, pvid, vl);
vl->members |= BIT(port) | BIT(dev->cpu_port);
vl->untag |= BIT(port) | BIT(dev->cpu_port);
b53_set_vlan_entry(dev, pvid, vl);
/* Make this port join all VLANs without VLAN entries */
if (is58xx(dev)) {
b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, &reg);
reg |= BIT(port);
if (!(reg & BIT(cpu_port)))
reg |= BIT(cpu_port);
b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
} else {
b53_get_vlan_entry(dev, pvid, vl);
vl->members |= BIT(port) | BIT(dev->cpu_port);
vl->untag |= BIT(port) | BIT(dev->cpu_port);
b53_set_vlan_entry(dev, pvid, vl);
}
}
static void b53_br_set_stp_state(struct dsa_switch *ds, int port,
u8 state)
static void b53_br_set_stp_state(struct dsa_switch *ds, int port, u8 state)
{
struct b53_device *dev = ds_to_priv(ds);
u8 hw_state, cur_hw_state;
struct b53_device *dev = ds->priv;
u8 hw_state;
u8 reg;
b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), &reg);
cur_hw_state = reg & PORT_CTRL_STP_STATE_MASK;
switch (state) {
case BR_STATE_DISABLED:
hw_state = PORT_CTRL_DIS_STATE;
@ -1353,30 +1429,28 @@ static void b53_br_set_stp_state(struct dsa_switch *ds, int port,
return;
}
/* Fast-age ARL entries if we are moving a port from Learning or
* Forwarding (cur_hw_state) state to Disabled, Blocking or Listening
* state (hw_state)
*/
if (cur_hw_state != hw_state) {
if (cur_hw_state >= PORT_CTRL_LEARN_STATE &&
hw_state <= PORT_CTRL_LISTEN_STATE) {
if (b53_fast_age_port(dev, port)) {
dev_err(ds->dev, "fast ageing failed\n");
return;
}
}
}
b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), &reg);
reg &= ~PORT_CTRL_STP_STATE_MASK;
reg |= hw_state;
b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
}
static struct dsa_switch_driver b53_switch_ops = {
.tag_protocol = DSA_TAG_PROTO_NONE,
static void b53_br_fast_age(struct dsa_switch *ds, int port)
{
struct b53_device *dev = ds->priv;
if (b53_fast_age_port(dev, port))
dev_err(ds->dev, "fast ageing failed\n");
}
static enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds)
{
return DSA_TAG_PROTO_NONE;
}
static struct dsa_switch_ops b53_switch_ops = {
.get_tag_protocol = b53_get_tag_protocol,
.setup = b53_setup,
.set_addr = b53_set_addr,
.get_strings = b53_get_strings,
.get_ethtool_stats = b53_get_ethtool_stats,
.get_sset_count = b53_get_sset_count,
@ -1388,6 +1462,7 @@ static struct dsa_switch_driver b53_switch_ops = {
.port_bridge_join = b53_br_join,
.port_bridge_leave = b53_br_leave,
.port_stp_state_set = b53_br_set_stp_state,
.port_fast_age = b53_br_fast_age,
.port_vlan_filtering = b53_vlan_filtering,
.port_vlan_prepare = b53_vlan_prepare,
.port_vlan_add = b53_vlan_add,
@ -1593,11 +1668,22 @@ static const struct b53_chip_data b53_switch_chips[] = {
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
},
{
.chip_id = BCM7445_DEVICE_ID,
.dev_name = "BCM7445",
.vlans = 4096,
.enabled_ports = 0x1ff,
.arl_entries = 4,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
},
};
static int b53_switch_init(struct b53_device *dev)
{
struct dsa_switch *ds = dev->ds;
unsigned int i;
int ret;
@ -1613,7 +1699,6 @@ static int b53_switch_init(struct b53_device *dev)
dev->vta_regs[1] = chip->vta_regs[1];
dev->vta_regs[2] = chip->vta_regs[2];
dev->jumbo_pm_reg = chip->jumbo_pm_reg;
ds->drv = &b53_switch_ops;
dev->cpu_port = chip->cpu_port;
dev->num_vlans = chip->vlans;
dev->num_arl_entries = chip->arl_entries;
@ -1681,7 +1766,8 @@ static int b53_switch_init(struct b53_device *dev)
return 0;
}
struct b53_device *b53_switch_alloc(struct device *base, struct b53_io_ops *ops,
struct b53_device *b53_switch_alloc(struct device *base,
const struct b53_io_ops *ops,
void *priv)
{
struct dsa_switch *ds;
@ -1700,6 +1786,7 @@ struct b53_device *b53_switch_alloc(struct device *base, struct b53_io_ops *ops,
dev->ds = ds;
dev->priv = priv;
dev->ops = ops;
ds->ops = &b53_switch_ops;
mutex_init(&dev->reg_mutex);
mutex_init(&dev->stats_mutex);

2
drivers/net/dsa/b53/b53_mdio.c
View File

@ -267,7 +267,7 @@ static int b53_mdio_phy_write16(struct b53_device *dev, int addr, int reg,
return mdiobus_write_nested(bus, addr, reg, value);
}
static struct b53_io_ops b53_mdio_ops = {
static const struct b53_io_ops b53_mdio_ops = {
.read8 = b53_mdio_read8,
.read16 = b53_mdio_read16,
.read32 = b53_mdio_read32,

2
drivers/net/dsa/b53/b53_mmap.c
View File

@ -208,7 +208,7 @@ static int b53_mmap_write64(struct b53_device *dev, u8 page, u8 reg,
return 0;
}
static struct b53_io_ops b53_mmap_ops = {
static const struct b53_io_ops b53_mmap_ops = {
.read8 = b53_mmap_read8,
.read16 = b53_mmap_read16,
.read32 = b53_mmap_read32,

11
drivers/net/dsa/b53/b53_priv.h
View File

@ -60,6 +60,7 @@ enum {
BCM53018_DEVICE_ID = 0x53018,
BCM53019_DEVICE_ID = 0x53019,
BCM58XX_DEVICE_ID = 0x5800,
BCM7445_DEVICE_ID = 0x7445,
};
#define B53_N_PORTS 9
@ -174,6 +175,12 @@ static inline int is5301x(struct b53_device *dev)
dev->chip_id == BCM53019_DEVICE_ID;
}
static inline int is58xx(struct b53_device *dev)
{
return dev->chip_id == BCM58XX_DEVICE_ID ||
dev->chip_id == BCM7445_DEVICE_ID;
}
#define B53_CPU_PORT_25 5
#define B53_CPU_PORT 8
@ -182,7 +189,8 @@ static inline int is_cpu_port(struct b53_device *dev, int port)
return dev->cpu_port;
}
struct b53_device *b53_switch_alloc(struct device *base, struct b53_io_ops *ops,
struct b53_device *b53_switch_alloc(struct device *base,
const struct b53_io_ops *ops,
void *priv);
int b53_switch_detect(struct b53_device *dev);
@ -364,7 +372,6 @@ static inline void b53_arl_from_entry(u64 *mac_vid, u32 *fwd_entry,
#ifdef CONFIG_BCM47XX
#include <linux/version.h>
#include <linux/bcm47xx_nvram.h>
#include <bcm47xx_board.h>
static inline int b53_switch_get_reset_gpio(struct b53_device *dev)

3
drivers/net/dsa/b53/b53_regs.h
View File

@ -309,6 +309,9 @@
/* Port VLAN mask (16 bit) IMP port is always 8, also on 5325 & co */
#define B53_PVLAN_PORT_MASK(i) ((i) * 2)
/* Join all VLANs register (16 bit) */
#define B53_JOIN_ALL_VLAN_EN 0x50
/*************************************************************************
* 802.1Q Page Registers
*************************************************************************/

4
drivers/net/dsa/b53/b53_spi.c
View File

@ -270,7 +270,7 @@ static int b53_spi_write64(struct b53_device *dev, u8 page, u8 reg, u64 value)
return spi_write(spi, txbuf, sizeof(txbuf));
}
static struct b53_io_ops b53_spi_ops = {
static const struct b53_io_ops b53_spi_ops = {
.read8 = b53_spi_read8,
.read16 = b53_spi_read16,
.read32 = b53_spi_read32,
@ -317,8 +317,6 @@ static int b53_spi_remove(struct spi_device *spi)
static struct spi_driver b53_spi_driver = {
.driver = {
.name = "b53-switch",
.bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = b53_spi_probe,
.remove = b53_spi_remove,

2
drivers/net/dsa/b53/b53_srab.c
View File

@ -344,7 +344,7 @@ err:
return ret;
}
static struct b53_io_ops b53_srab_ops = {
static const struct b53_io_ops b53_srab_ops = {
.read8 = b53_srab_read8,
.read16 = b53_srab_read16,
.read32 = b53_srab_read32,

1110
drivers/net/dsa/bcm_sf2.c
View File

File diff suppressed because it is too large Load Diff

82
drivers/net/dsa/bcm_sf2.h
View File

@ -26,6 +26,7 @@
#include <net/dsa.h>
#include "bcm_sf2_regs.h"
#include "b53/b53_priv.h"
struct bcm_sf2_hw_params {
u16 top_rev;
@ -49,72 +50,8 @@ struct bcm_sf2_port_status {
unsigned int link;
struct ethtool_eee eee;
u32 vlan_ctl_mask;
u16 pvid;
struct net_device *bridge_dev;
};
struct bcm_sf2_arl_entry {
u8 port;
u8 mac[ETH_ALEN];
u16 vid;
u8 is_valid:1;
u8 is_age:1;
u8 is_static:1;
};
struct bcm_sf2_vlan {
u16 members;
u16 untag;
};
static inline void bcm_sf2_mac_from_u64(u64 src, u8 *dst)
{
unsigned int i;
for (i = 0; i < ETH_ALEN; i++)
dst[ETH_ALEN - 1 - i] = (src >> (8 * i)) & 0xff;
}
static inline u64 bcm_sf2_mac_to_u64(const u8 *src)
{
unsigned int i;
u64 dst = 0;
for (i = 0; i < ETH_ALEN; i++)
dst |= (u64)src[ETH_ALEN - 1 - i] << (8 * i);
return dst;
}
static inline void bcm_sf2_arl_to_entry(struct bcm_sf2_arl_entry *ent,
u64 mac_vid, u32 fwd_entry)
{
memset(ent, 0, sizeof(*ent));
ent->port = fwd_entry & PORTID_MASK;
ent->is_valid = !!(fwd_entry & ARL_VALID);
ent->is_age = !!(fwd_entry & ARL_AGE);
ent->is_static = !!(fwd_entry & ARL_STATIC);
bcm_sf2_mac_from_u64(mac_vid, ent->mac);
ent->vid = mac_vid >> VID_SHIFT;
}
static inline void bcm_sf2_arl_from_entry(u64 *mac_vid, u32 *fwd_entry,
const struct bcm_sf2_arl_entry *ent)
{
*mac_vid = bcm_sf2_mac_to_u64(ent->mac);
*mac_vid |= (u64)(ent->vid & VID_MASK) << VID_SHIFT;
*fwd_entry = ent->port & PORTID_MASK;
if (ent->is_valid)
*fwd_entry |= ARL_VALID;
if (ent->is_static)
*fwd_entry |= ARL_STATIC;
if (ent->is_age)
*fwd_entry |= ARL_AGE;
}
struct bcm_sf2_priv {
/* Base registers, keep those in order with BCM_SF2_REGS_NAME */
void __iomem *core;
@ -134,6 +71,9 @@ struct bcm_sf2_priv {
u32 irq1_stat;
u32 irq1_mask;
/* Backing b53_device */
struct b53_device *dev;
/* Mutex protecting access to the MIB counters */
struct mutex stats_mutex;
@ -155,16 +95,14 @@ struct bcm_sf2_priv {
struct device_node *master_mii_dn;
struct mii_bus *slave_mii_bus;
struct mii_bus *master_mii_bus;
/* Cache of programmed VLANs */
struct bcm_sf2_vlan vlans[VLAN_N_VID];
};
struct bcm_sf2_hw_stats {
const char *string;
u16 reg;
u8 sizeof_stat;
};
static inline struct bcm_sf2_priv *bcm_sf2_to_priv(struct dsa_switch *ds)
{
struct b53_device *dev = ds->priv;
return dev->priv;
}
#define SF2_IO_MACRO(name) \
static inline u32 name##_readl(struct bcm_sf2_priv *priv, u32 off) \

122
drivers/net/dsa/bcm_sf2_regs.h
View File

@ -115,14 +115,6 @@
#define RX_BCST_EN (1 << 2)
#define RX_MCST_EN (1 << 3)
#define RX_UCST_EN (1 << 4)
#define G_MISTP_STATE_SHIFT 5
#define G_MISTP_NO_STP (0 << G_MISTP_STATE_SHIFT)
#define G_MISTP_DIS_STATE (1 << G_MISTP_STATE_SHIFT)
#define G_MISTP_BLOCK_STATE (2 << G_MISTP_STATE_SHIFT)
#define G_MISTP_LISTEN_STATE (3 << G_MISTP_STATE_SHIFT)
#define G_MISTP_LEARN_STATE (4 << G_MISTP_STATE_SHIFT)
#define G_MISTP_FWD_STATE (5 << G_MISTP_STATE_SHIFT)
#define G_MISTP_STATE_MASK 0x7
#define CORE_SWMODE 0x0002c
#define SW_FWDG_MODE (1 << 0)
@ -205,75 +197,11 @@
#define BRCM_HDR_EN_P5 (1 << 1)
#define BRCM_HDR_EN_P7 (1 << 2)
#define CORE_BRCM_HDR_CTRL2 0x0828
#define CORE_HL_PRTC_CTRL 0x0940
#define ARP_EN (1 << 0)
#define RARP_EN (1 << 1)
#define DHCP_EN (1 << 2)
#define ICMPV4_EN (1 << 3)
#define ICMPV6_EN (1 << 4)
#define ICMPV6_FWD_MODE (1 << 5)
#define IGMP_DIP_EN (1 << 8)
#define IGMP_RPTLVE_EN (1 << 9)
#define IGMP_RTPLVE_FWD_MODE (1 << 10)
#define IGMP_QRY_EN (1 << 11)
#define IGMP_QRY_FWD_MODE (1 << 12)
#define IGMP_UKN_EN (1 << 13)
#define IGMP_UKN_FWD_MODE (1 << 14)
#define MLD_RPTDONE_EN (1 << 15)
#define MLD_RPTDONE_FWD_MODE (1 << 16)
#define MLD_QRY_EN (1 << 17)
#define MLD_QRY_FWD_MODE (1 << 18)
#define CORE_RST_MIB_CNT_EN 0x0950
#define CORE_BRCM_HDR_RX_DIS 0x0980
#define CORE_BRCM_HDR_TX_DIS 0x0988
#define CORE_ARLA_NUM_ENTRIES 1024
#define CORE_ARLA_RWCTL 0x1400
#define ARL_RW (1 << 0)
#define IVL_SVL_SELECT (1 << 6)
#define ARL_STRTDN (1 << 7)
#define CORE_ARLA_MAC 0x1408
#define CORE_ARLA_VID 0x1420
#define ARLA_VIDTAB_INDX_MASK 0x1fff
#define CORE_ARLA_MACVID0 0x1440
#define MAC_MASK 0xffffffffff
#define VID_SHIFT 48
#define VID_MASK 0xfff
#define CORE_ARLA_FWD_ENTRY0 0x1460
#define PORTID_MASK 0x1ff
#define ARL_CON_SHIFT 9
#define ARL_CON_MASK 0x3
#define ARL_PRI_SHIFT 11
#define ARL_PRI_MASK 0x7
#define ARL_AGE (1 << 14)
#define ARL_STATIC (1 << 15)
#define ARL_VALID (1 << 16)
#define CORE_ARLA_MACVID_ENTRY(x) (CORE_ARLA_MACVID0 + ((x) * 0x40))
#define CORE_ARLA_FWD_ENTRY(x) (CORE_ARLA_FWD_ENTRY0 + ((x) * 0x40))
#define CORE_ARLA_SRCH_CTL 0x1540
#define ARLA_SRCH_VLID (1 << 0)
#define IVL_SVL_SELECT (1 << 6)
#define ARLA_SRCH_STDN (1 << 7)
#define CORE_ARLA_SRCH_ADR 0x1544
#define ARLA_SRCH_ADR_VALID (1 << 15)
#define CORE_ARLA_SRCH_RSLT_0_MACVID 0x1580
#define CORE_ARLA_SRCH_RSLT_0 0x15a0
#define CORE_ARLA_SRCH_RSLT_MACVID(x) (CORE_ARLA_SRCH_RSLT_0_MACVID + ((x) * 0x40))
#define CORE_ARLA_SRCH_RSLT(x) (CORE_ARLA_SRCH_RSLT_0 + ((x) * 0x40))
#define CORE_ARLA_VTBL_RWCTRL 0x1600
#define ARLA_VTBL_CMD_WRITE 0
#define ARLA_VTBL_CMD_READ 1
@ -297,59 +225,9 @@
#define P_TXQ_PSM_VDD(x) (P_TXQ_PSM_VDD_MASK << \
((x) * P_TXQ_PSM_VDD_SHIFT))
#define CORE_P0_MIB_OFFSET 0x8000
#define P_MIB_SIZE 0x400
#define CORE_P_MIB_OFFSET(x) (CORE_P0_MIB_OFFSET + (x) * P_MIB_SIZE)
#define CORE_PORT_VLAN_CTL_PORT(x) (0xc400 + ((x) * 0x8))
#define PORT_VLAN_CTRL_MASK 0x1ff
#define CORE_VLAN_CTRL0 0xd000
#define CHANGE_1P_VID_INNER (1 << 0)
#define CHANGE_1P_VID_OUTER (1 << 1)
#define CHANGE_1Q_VID (1 << 3)
#define VLAN_LEARN_MODE_SVL (0 << 5)
#define VLAN_LEARN_MODE_IVL (3 << 5)
#define VLAN_EN (1 << 7)
#define CORE_VLAN_CTRL1 0xd004
#define EN_RSV_MCAST_FWDMAP (1 << 2)
#define EN_RSV_MCAST_UNTAG (1 << 3)
#define EN_IPMC_BYPASS_FWDMAP (1 << 5)
#define EN_IPMC_BYPASS_UNTAG (1 << 6)
#define CORE_VLAN_CTRL2 0xd008
#define EN_MIIM_BYPASS_V_FWDMAP (1 << 2)
#define EN_GMRP_GVRP_V_FWDMAP (1 << 5)
#define EN_GMRP_GVRP_UNTAG_MAP (1 << 6)
#define CORE_VLAN_CTRL3 0xd00c
#define EN_DROP_NON1Q_MASK 0x1ff
#define CORE_VLAN_CTRL4 0xd014
#define RESV_MCAST_FLOOD (1 << 1)
#define EN_DOUBLE_TAG_MASK 0x3
#define EN_DOUBLE_TAG_SHIFT 2
#define EN_MGE_REV_GMRP (1 << 4)
#define EN_MGE_REV_GVRP (1 << 5)
#define INGR_VID_CHK_SHIFT 6
#define INGR_VID_CHK_MASK 0x3
#define INGR_VID_CHK_FWD (0 << INGR_VID_CHK_SHIFT)
#define INGR_VID_CHK_DROP (1 << INGR_VID_CHK_SHIFT)
#define INGR_VID_CHK_NO_CHK (2 << INGR_VID_CHK_SHIFT)
#define INGR_VID_CHK_VID_VIOL_IMP (3 << INGR_VID_CHK_SHIFT)
#define CORE_VLAN_CTRL5 0xd018
#define EN_CPU_RX_BYP_INNER_CRCCHCK (1 << 0)
#define EN_VID_FFF_FWD (1 << 2)
#define DROP_VTABLE_MISS (1 << 3)
#define EGRESS_DIR_FRM_BYP_TRUNK_EN (1 << 4)
#define PRESV_NON1Q (1 << 6)
#define CORE_VLAN_CTRL6 0xd01c
#define STRICT_SFD_DETECT (1 << 0)
#define DIS_ARL_BUST_LMIT (1 << 4)
#define CORE_DEFAULT_1Q_TAG_P(x) (0xd040 + ((x) * 8))
#define CFI_SHIFT 12
#define PRI_SHIFT 13

17
drivers/net/dsa/mv88e6060.c
View File

@ -19,7 +19,7 @@
static int reg_read(struct dsa_switch *ds, int addr, int reg)
{
struct mv88e6060_priv *priv = ds_to_priv(ds);
struct mv88e6060_priv *priv = ds->priv;
return mdiobus_read_nested(priv->bus, priv->sw_addr + addr, reg);
}
@ -37,7 +37,7 @@ static int reg_read(struct dsa_switch *ds, int addr, int reg)
static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
{
struct mv88e6060_priv *priv = ds_to_priv(ds);
struct mv88e6060_priv *priv = ds->priv;
return mdiobus_write_nested(priv->bus, priv->sw_addr + addr, reg, val);
}
@ -69,6 +69,11 @@ static const char *mv88e6060_get_name(struct mii_bus *bus, int sw_addr)
return NULL;
}
static enum dsa_tag_protocol mv88e6060_get_tag_protocol(struct dsa_switch *ds)
{
return DSA_TAG_PROTO_TRAILER;
}
static const char *mv88e6060_drv_probe(struct device *dsa_dev,
struct device *host_dev, int sw_addr,
void **_priv)
@ -247,8 +252,8 @@ mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
return reg_write(ds, addr, regnum, val);
}
static struct dsa_switch_driver mv88e6060_switch_driver = {
.tag_protocol = DSA_TAG_PROTO_TRAILER,
static struct dsa_switch_ops mv88e6060_switch_ops = {
.get_tag_protocol = mv88e6060_get_tag_protocol,
.probe = mv88e6060_drv_probe,
.setup = mv88e6060_setup,
.set_addr = mv88e6060_set_addr,
@ -258,14 +263,14 @@ static struct dsa_switch_driver mv88e6060_switch_driver = {
static int __init mv88e6060_init(void)
{
register_switch_driver(&mv88e6060_switch_driver);
register_switch_driver(&mv88e6060_switch_ops);
return 0;
}
module_init(mv88e6060_init);
static void __exit mv88e6060_cleanup(void)
{
unregister_switch_driver(&mv88e6060_switch_driver);
unregister_switch_driver(&mv88e6060_switch_ops);
}
module_exit(mv88e6060_cleanup);

12
drivers/net/dsa/mv88e6xxx/Kconfig
View File

@ -2,6 +2,18 @@ config NET_DSA_MV88E6XXX
tristate "Marvell 88E6xxx Ethernet switch fabric support"
depends on NET_DSA
select NET_DSA_TAG_EDSA
select NET_DSA_TAG_DSA
help
This driver adds support for most of the Marvell 88E6xxx models of
Ethernet switch chips, except 88E6060.
config NET_DSA_MV88E6XXX_GLOBAL2
bool "Switch Global 2 Registers support"
default y
depends on NET_DSA_MV88E6XXX
help
This registers set at internal SMI address 0x1C provides extended
features like EEPROM interface, trunking, cross-chip setup, etc.
It is required on most chips. If the chip you compile the support for
doesn't have such registers set, say N here. In doubt, say Y.

5
drivers/net/dsa/mv88e6xxx/Makefile
View File

@ -1 +1,4 @@
obj-$(CONFIG_NET_DSA_MV88E6XXX) += chip.o
obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o
mv88e6xxx-objs := chip.o
mv88e6xxx-objs += global1.o
mv88e6xxx-$(CONFIG_NET_DSA_MV88E6XXX_GLOBAL2) += global2.o

2415
drivers/net/dsa/mv88e6xxx/chip.c
View File

File diff suppressed because it is too large Load Diff

34
drivers/net/dsa/mv88e6xxx/global1.c Normal file
View File

@ -0,0 +1,34 @@
/*
* Marvell 88E6xxx Switch Global (1) Registers support
*
* Copyright (c) 2008 Marvell Semiconductor
*
* Copyright (c) 2016 Vivien Didelot <vivien.didelot@savoirfairelinux.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include "mv88e6xxx.h"
#include "global1.h"
int mv88e6xxx_g1_read(struct mv88e6xxx_chip *chip, int reg, u16 *val)
{
int addr = chip->info->global1_addr;
return mv88e6xxx_read(chip, addr, reg, val);
}
int mv88e6xxx_g1_write(struct mv88e6xxx_chip *chip, int reg, u16 val)
{
int addr = chip->info->global1_addr;
return mv88e6xxx_write(chip, addr, reg, val);
}
int mv88e6xxx_g1_wait(struct mv88e6xxx_chip *chip, int reg, u16 mask)
{
return mv88e6xxx_wait(chip, chip->info->global1_addr, reg, mask);
}

23
drivers/net/dsa/mv88e6xxx/global1.h Normal file
View File

@ -0,0 +1,23 @@
/*
* Marvell 88E6xxx Switch Global (1) Registers support
*
* Copyright (c) 2008 Marvell Semiconductor
*
* Copyright (c) 2016 Vivien Didelot <vivien.didelot@savoirfairelinux.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef _MV88E6XXX_GLOBAL1_H
#define _MV88E6XXX_GLOBAL1_H
#include "mv88e6xxx.h"
int mv88e6xxx_g1_read(struct mv88e6xxx_chip *chip, int reg, u16 *val);
int mv88e6xxx_g1_write(struct mv88e6xxx_chip *chip, int reg, u16 val);
int mv88e6xxx_g1_wait(struct mv88e6xxx_chip *chip, int reg, u16 mask);
#endif /* _MV88E6XXX_GLOBAL1_H */

491
drivers/net/dsa/mv88e6xxx/global2.c Normal file
View File

@ -0,0 +1,491 @@
/*
* Marvell 88E6xxx Switch Global 2 Registers support (device address 0x1C)
*
* Copyright (c) 2008 Marvell Semiconductor
*
* Copyright (c) 2016 Vivien Didelot <vivien.didelot@savoirfairelinux.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include "mv88e6xxx.h"
#include "global2.h"
#define ADDR_GLOBAL2 0x1c
static int mv88e6xxx_g2_read(struct mv88e6xxx_chip *chip, int reg, u16 *val)
{
return mv88e6xxx_read(chip, ADDR_GLOBAL2, reg, val);
}
static int mv88e6xxx_g2_write(struct mv88e6xxx_chip *chip, int reg, u16 val)
{
return mv88e6xxx_write(chip, ADDR_GLOBAL2, reg, val);
}
static int mv88e6xxx_g2_update(struct mv88e6xxx_chip *chip, int reg, u16 update)
{
return mv88e6xxx_update(chip, ADDR_GLOBAL2, reg, update);
}
static int mv88e6xxx_g2_wait(struct mv88e6xxx_chip *chip, int reg, u16 mask)
{
return mv88e6xxx_wait(chip, ADDR_GLOBAL2, reg, mask);
}
/* Offset 0x06: Device Mapping Table register */
static int mv88e6xxx_g2_device_mapping_write(struct mv88e6xxx_chip *chip,
int target, int port)
{
u16 val = (target << 8) | (port & 0xf);
return mv88e6xxx_g2_update(chip, GLOBAL2_DEVICE_MAPPING, val);
}
static int mv88e6xxx_g2_set_device_mapping(struct mv88e6xxx_chip *chip)
{
int target, port;
int err;
/* Initialize the routing port to the 32 possible target devices */
for (target = 0; target < 32; ++target) {
port = 0xf;
if (target < DSA_MAX_SWITCHES) {
port = chip->ds->rtable[target];
if (port == DSA_RTABLE_NONE)
port = 0xf;
}
err = mv88e6xxx_g2_device_mapping_write(chip, target, port);
if (err)
break;
}
return err;
}
/* Offset 0x07: Trunk Mask Table register */
static int mv88e6xxx_g2_trunk_mask_write(struct mv88e6xxx_chip *chip, int num,
bool hask, u16 mask)
{
const u16 port_mask = BIT(mv88e6xxx_num_ports(chip)) - 1;
u16 val = (num << 12) | (mask & port_mask);
if (hask)
val |= GLOBAL2_TRUNK_MASK_HASK;
return mv88e6xxx_g2_update(chip, GLOBAL2_TRUNK_MASK, val);
}
/* Offset 0x08: Trunk Mapping Table register */
static int mv88e6xxx_g2_trunk_mapping_write(struct mv88e6xxx_chip *chip, int id,
u16 map)
{
const u16 port_mask = BIT(mv88e6xxx_num_ports(chip)) - 1;
u16 val = (id << 11) | (map & port_mask);
return mv88e6xxx_g2_update(chip, GLOBAL2_TRUNK_MAPPING, val);
}
static int mv88e6xxx_g2_clear_trunk(struct mv88e6xxx_chip *chip)
{
const u16 port_mask = BIT(mv88e6xxx_num_ports(chip)) - 1;
int i, err;
/* Clear all eight possible Trunk Mask vectors */
for (i = 0; i < 8; ++i) {
err = mv88e6xxx_g2_trunk_mask_write(chip, i, false, port_mask);
if (err)
return err;
}
/* Clear all sixteen possible Trunk ID routing vectors */
for (i = 0; i < 16; ++i) {
err = mv88e6xxx_g2_trunk_mapping_write(chip, i, 0);
if (err)
return err;
}
return 0;
}
/* Offset 0x09: Ingress Rate Command register
* Offset 0x0A: Ingress Rate Data register
*/
static int mv88e6xxx_g2_clear_irl(struct mv88e6xxx_chip *chip)
{
int port, err;
/* Init all Ingress Rate Limit resources of all ports */
for (port = 0; port < mv88e6xxx_num_ports(chip); ++port) {
/* XXX newer chips (like 88E6390) have different 2-bit ops */
err = mv88e6xxx_g2_write(chip, GLOBAL2_IRL_CMD,
GLOBAL2_IRL_CMD_OP_INIT_ALL |
(port << 8));
if (err)
break;
/* Wait for the operation to complete */
err = mv88e6xxx_g2_wait(chip, GLOBAL2_IRL_CMD,
GLOBAL2_IRL_CMD_BUSY);
if (err)
break;
}
return err;
}
/* Offset 0x0D: Switch MAC/WoL/WoF register */
static int mv88e6xxx_g2_switch_mac_write(struct mv88e6xxx_chip *chip,
unsigned int pointer, u8 data)
{
u16 val = (pointer << 8) | data;
return mv88e6xxx_g2_update(chip, GLOBAL2_SWITCH_MAC, val);
}
int mv88e6xxx_g2_set_switch_mac(struct mv88e6xxx_chip *chip, u8 *addr)
{
int i, err;
for (i = 0; i < 6; i++) {
err = mv88e6xxx_g2_switch_mac_write(chip, i, addr[i]);
if (err)
break;
}
return err;
}
/* Offset 0x0F: Priority Override Table */
static int mv88e6xxx_g2_pot_write(struct mv88e6xxx_chip *chip, int pointer,
u8 data)
{
u16 val = (pointer << 8) | (data & 0x7);
return mv88e6xxx_g2_update(chip, GLOBAL2_PRIO_OVERRIDE, val);
}
static int mv88e6xxx_g2_clear_pot(struct mv88e6xxx_chip *chip)
{
int i, err;
/* Clear all sixteen possible Priority Override entries */
for (i = 0; i < 16; i++) {
err = mv88e6xxx_g2_pot_write(chip, i, 0);
if (err)
break;
}
return err;
}
/* Offset 0x14: EEPROM Command
* Offset 0x15: EEPROM Data
*/
static int mv88e6xxx_g2_eeprom_wait(struct mv88e6xxx_chip *chip)
{
return mv88e6xxx_g2_wait(chip, GLOBAL2_EEPROM_CMD,
GLOBAL2_EEPROM_CMD_BUSY |
GLOBAL2_EEPROM_CMD_RUNNING);
}
static int mv88e6xxx_g2_eeprom_cmd(struct mv88e6xxx_chip *chip, u16 cmd)
{
int err;
err = mv88e6xxx_g2_write(chip, GLOBAL2_EEPROM_CMD, cmd);
if (err)
return err;
return mv88e6xxx_g2_eeprom_wait(chip);
}
static int mv88e6xxx_g2_eeprom_read16(struct mv88e6xxx_chip *chip,
u8 addr, u16 *data)
{
u16 cmd = GLOBAL2_EEPROM_CMD_OP_READ | addr;
int err;
err = mv88e6xxx_g2_eeprom_wait(chip);
if (err)
return err;
err = mv88e6xxx_g2_eeprom_cmd(chip, cmd);
if (err)
return err;
return mv88e6xxx_g2_read(chip, GLOBAL2_EEPROM_DATA, data);
}
static int mv88e6xxx_g2_eeprom_write16(struct mv88e6xxx_chip *chip,
u8 addr, u16 data)
{
u16 cmd = GLOBAL2_EEPROM_CMD_OP_WRITE | addr;
int err;
err = mv88e6xxx_g2_eeprom_wait(chip);
if (err)
return err;
err = mv88e6xxx_g2_write(chip, GLOBAL2_EEPROM_DATA, data);
if (err)
return err;
return mv88e6xxx_g2_eeprom_cmd(chip, cmd);
}
int mv88e6xxx_g2_get_eeprom16(struct mv88e6xxx_chip *chip,
struct ethtool_eeprom *eeprom, u8 *data)
{
unsigned int offset = eeprom->offset;
unsigned int len = eeprom->len;
u16 val;
int err;
eeprom->len = 0;
if (offset & 1) {
err = mv88e6xxx_g2_eeprom_read16(chip, offset >> 1, &val);
if (err)
return err;
*data++ = (val >> 8) & 0xff;
offset++;
len--;
eeprom->len++;
}
while (len >= 2) {
err = mv88e6xxx_g2_eeprom_read16(chip, offset >> 1, &val);
if (err)
return err;
*data++ = val & 0xff;
*data++ = (val >> 8) & 0xff;
offset += 2;
len -= 2;
eeprom->len += 2;
}
if (len) {
err = mv88e6xxx_g2_eeprom_read16(chip, offset >> 1, &val);
if (err)
return err;
*data++ = val & 0xff;
offset++;
len--;
eeprom->len++;
}
return 0;
}
int mv88e6xxx_g2_set_eeprom16(struct mv88e6xxx_chip *chip,
struct ethtool_eeprom *eeprom, u8 *data)
{
unsigned int offset = eeprom->offset;
unsigned int len = eeprom->len;
u16 val;
int err;
/* Ensure the RO WriteEn bit is set */
err = mv88e6xxx_g2_read(chip, GLOBAL2_EEPROM_CMD, &val);
if (err)
return err;
if (!(val & GLOBAL2_EEPROM_CMD_WRITE_EN))
return -EROFS;
eeprom->len = 0;
if (offset & 1) {
err = mv88e6xxx_g2_eeprom_read16(chip, offset >> 1, &val);
if (err)
return err;
val = (*data++ << 8) | (val & 0xff);
err = mv88e6xxx_g2_eeprom_write16(chip, offset >> 1, val);
if (err)
return err;
offset++;
len--;
eeprom->len++;
}
while (len >= 2) {
val = *data++;
val |= *data++ << 8;
err = mv88e6xxx_g2_eeprom_write16(chip, offset >> 1, val);
if (err)
return err;
offset += 2;
len -= 2;
eeprom->len += 2;
}
if (len) {
err = mv88e6xxx_g2_eeprom_read16(chip, offset >> 1, &val);
if (err)
return err;
val = (val & 0xff00) | *data++;
err = mv88e6xxx_g2_eeprom_write16(chip, offset >> 1, val);
if (err)
return err;
offset++;
len--;
eeprom->len++;
}
return 0;
}
/* Offset 0x18: SMI PHY Command Register
* Offset 0x19: SMI PHY Data Register
*/
static int mv88e6xxx_g2_smi_phy_wait(struct mv88e6xxx_chip *chip)
{
return mv88e6xxx_g2_wait(chip, GLOBAL2_SMI_PHY_CMD,
GLOBAL2_SMI_PHY_CMD_BUSY);
}
static int mv88e6xxx_g2_smi_phy_cmd(struct mv88e6xxx_chip *chip, u16 cmd)
{
int err;
err = mv88e6xxx_g2_write(chip, GLOBAL2_SMI_PHY_CMD, cmd);
if (err)
return err;
return mv88e6xxx_g2_smi_phy_wait(chip);
}
int mv88e6xxx_g2_smi_phy_read(struct mv88e6xxx_chip *chip, int addr, int reg,
u16 *val)
{
u16 cmd = GLOBAL2_SMI_PHY_CMD_OP_22_READ_DATA | (addr << 5) | reg;
int err;
err = mv88e6xxx_g2_smi_phy_wait(chip);
if (err)
return err;
err = mv88e6xxx_g2_smi_phy_cmd(chip, cmd);
if (err)
return err;
return mv88e6xxx_g2_read(chip, GLOBAL2_SMI_PHY_DATA, val);
}
int mv88e6xxx_g2_smi_phy_write(struct mv88e6xxx_chip *chip, int addr, int reg,
u16 val)
{
u16 cmd = GLOBAL2_SMI_PHY_CMD_OP_22_WRITE_DATA | (addr << 5) | reg;
int err;
err = mv88e6xxx_g2_smi_phy_wait(chip);
if (err)
return err;
err = mv88e6xxx_g2_write(chip, GLOBAL2_SMI_PHY_DATA, val);
if (err)
return err;
return mv88e6xxx_g2_smi_phy_cmd(chip, cmd);
}
int mv88e6xxx_g2_setup(struct mv88e6xxx_chip *chip)
{
u16 reg;
int err;
if (mv88e6xxx_has(chip, MV88E6XXX_FLAG_G2_MGMT_EN_2X)) {
/* Consider the frames with reserved multicast destination
* addresses matching 01:80:c2:00:00:2x as MGMT.
*/
err = mv88e6xxx_g2_write(chip, GLOBAL2_MGMT_EN_2X, 0xffff);
if (err)
return err;
}
if (mv88e6xxx_has(chip, MV88E6XXX_FLAG_G2_MGMT_EN_0X)) {
/* Consider the frames with reserved multicast destination
* addresses matching 01:80:c2:00:00:0x as MGMT.
*/
err = mv88e6xxx_g2_write(chip, GLOBAL2_MGMT_EN_0X, 0xffff);
if (err)
return err;
}
/* Ignore removed tag data on doubly tagged packets, disable
* flow control messages, force flow control priority to the
* highest, and send all special multicast frames to the CPU
* port at the highest priority.
*/
reg = GLOBAL2_SWITCH_MGMT_FORCE_FLOW_CTRL_PRI | (0x7 << 4);
if (mv88e6xxx_has(chip, MV88E6XXX_FLAG_G2_MGMT_EN_0X) ||
mv88e6xxx_has(chip, MV88E6XXX_FLAG_G2_MGMT_EN_2X))
reg |= GLOBAL2_SWITCH_MGMT_RSVD2CPU | 0x7;
err = mv88e6xxx_g2_write(chip, GLOBAL2_SWITCH_MGMT, reg);
if (err)
return err;
/* Program the DSA routing table. */
err = mv88e6xxx_g2_set_device_mapping(chip);
if (err)
return err;
/* Clear all trunk masks and mapping. */
err = mv88e6xxx_g2_clear_trunk(chip);
if (err)
return err;
if (mv88e6xxx_has(chip, MV88E6XXX_FLAGS_IRL)) {
/* Disable ingress rate limiting by resetting all per port
* ingress rate limit resources to their initial state.
*/
err = mv88e6xxx_g2_clear_irl(chip);
if (err)
return err;
}
if (mv88e6xxx_has(chip, MV88E6XXX_FLAGS_PVT)) {
/* Initialize Cross-chip Port VLAN Table to reset defaults */
err = mv88e6xxx_g2_write(chip, GLOBAL2_PVT_ADDR,
GLOBAL2_PVT_ADDR_OP_INIT_ONES);
if (err)
return err;
}
if (mv88e6xxx_has(chip, MV88E6XXX_FLAG_G2_POT)) {
/* Clear the priority override table. */
err = mv88e6xxx_g2_clear_pot(chip);
if (err)
return err;
}
return 0;
}

88
drivers/net/dsa/mv88e6xxx/global2.h Normal file
View File

@ -0,0 +1,88 @@
/*
* Marvell 88E6xxx Switch Global 2 Registers support (device address 0x1C)
*
* Copyright (c) 2008 Marvell Semiconductor
*
* Copyright (c) 2016 Vivien Didelot <vivien.didelot@savoirfairelinux.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef _MV88E6XXX_GLOBAL2_H
#define _MV88E6XXX_GLOBAL2_H
#include "mv88e6xxx.h"
#ifdef CONFIG_NET_DSA_MV88E6XXX_GLOBAL2
static inline int mv88e6xxx_g2_require(struct mv88e6xxx_chip *chip)
{
return 0;
}
int mv88e6xxx_g2_smi_phy_read(struct mv88e6xxx_chip *chip, int addr, int reg,
u16 *val);
int mv88e6xxx_g2_smi_phy_write(struct mv88e6xxx_chip *chip, int addr, int reg,
u16 val);
int mv88e6xxx_g2_set_switch_mac(struct mv88e6xxx_chip *chip, u8 *addr);
int mv88e6xxx_g2_get_eeprom16(struct mv88e6xxx_chip *chip,
struct ethtool_eeprom *eeprom, u8 *data);
int mv88e6xxx_g2_set_eeprom16(struct mv88e6xxx_chip *chip,
struct ethtool_eeprom *eeprom, u8 *data);
int mv88e6xxx_g2_setup(struct mv88e6xxx_chip *chip);
#else /* !CONFIG_NET_DSA_MV88E6XXX_GLOBAL2 */
static inline int mv88e6xxx_g2_require(struct mv88e6xxx_chip *chip)
{
if (mv88e6xxx_has(chip, MV88E6XXX_FLAG_GLOBAL2)) {
dev_err(chip->dev, "this chip requires CONFIG_NET_DSA_MV88E6XXX_GLOBAL2 enabled\n");
return -EOPNOTSUPP;
}
return 0;
}
static inline int mv88e6xxx_g2_smi_phy_read(struct mv88e6xxx_chip *chip,
int addr, int reg, u16 *val)
{
return -EOPNOTSUPP;
}
static inline int mv88e6xxx_g2_smi_phy_write(struct mv88e6xxx_chip *chip,
int addr, int reg, u16 val)
{
return -EOPNOTSUPP;
}
static inline int mv88e6xxx_g2_set_switch_mac(struct mv88e6xxx_chip *chip,
u8 *addr)
{
return -EOPNOTSUPP;
}
static inline int mv88e6xxx_g2_get_eeprom16(struct mv88e6xxx_chip *chip,
struct ethtool_eeprom *eeprom,
u8 *data)
{
return -EOPNOTSUPP;
}
static inline int mv88e6xxx_g2_set_eeprom16(struct mv88e6xxx_chip *chip,
struct ethtool_eeprom *eeprom,
u8 *data)
{
return -EOPNOTSUPP;
}
static inline int mv88e6xxx_g2_setup(struct mv88e6xxx_chip *chip)
{
return -EOPNOTSUPP;
}
#endif /* CONFIG_NET_DSA_MV88E6XXX_GLOBAL2 */
#endif /* _MV88E6XXX_GLOBAL2_H */

236
drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
View File

@ -30,11 +30,13 @@
#define SMI_CMD_OP_45_READ_DATA_INC ((3 << 10) | SMI_CMD_BUSY)
#define SMI_DATA 0x01
/* Fiber/SERDES Registers are located at SMI address F, page 1 */
#define REG_FIBER_SERDES 0x0f
#define PAGE_FIBER_SERDES 0x01
/* PHY Registers */
#define PHY_PAGE 0x16
#define PHY_PAGE_COPPER 0x00
#define ADDR_SERDES 0x0f
#define SERDES_PAGE_FIBER 0x01
#define REG_PORT(p) (0x10 + (p))
#define PORT_STATUS 0x00
#define PORT_STATUS_PAUSE_EN BIT(15)
#define PORT_STATUS_MY_PAUSE BIT(14)
@ -157,7 +159,6 @@
#define PORT_TAG_REGMAP_0123 0x18
#define PORT_TAG_REGMAP_4567 0x19
#define REG_GLOBAL 0x1b
#define GLOBAL_STATUS 0x00
#define GLOBAL_STATUS_PPU_STATE BIT(15) /* 6351 and 6171 */
/* Two bits for 6165, 6185 etc */
@ -169,8 +170,8 @@
#define GLOBAL_MAC_01 0x01
#define GLOBAL_MAC_23 0x02
#define GLOBAL_MAC_45 0x03
#define GLOBAL_ATU_FID 0x01 /* 6097 6165 6351 6352 */
#define GLOBAL_VTU_FID 0x02 /* 6097 6165 6351 6352 */
#define GLOBAL_ATU_FID 0x01
#define GLOBAL_VTU_FID 0x02
#define GLOBAL_VTU_FID_MASK 0xfff
#define GLOBAL_VTU_SID 0x03 /* 6097 6165 6351 6352 */
#define GLOBAL_VTU_SID_MASK 0x3f
@ -275,7 +276,6 @@
#define GLOBAL_STATS_COUNTER_32 0x1e
#define GLOBAL_STATS_COUNTER_01 0x1f
#define REG_GLOBAL2 0x1c
#define GLOBAL2_INT_SOURCE 0x00
#define GLOBAL2_INT_MASK 0x01
#define GLOBAL2_MGMT_EN_2X 0x02
@ -329,17 +329,16 @@
#define GLOBAL2_EEPROM_DATA 0x15
#define GLOBAL2_PTP_AVB_OP 0x16
#define GLOBAL2_PTP_AVB_DATA 0x17
#define GLOBAL2_SMI_OP 0x18
#define GLOBAL2_SMI_OP_BUSY BIT(15)
#define GLOBAL2_SMI_OP_CLAUSE_22 BIT(12)
#define GLOBAL2_SMI_OP_22_WRITE ((1 << 10) | GLOBAL2_SMI_OP_BUSY | \
GLOBAL2_SMI_OP_CLAUSE_22)
#define GLOBAL2_SMI_OP_22_READ ((2 << 10) | GLOBAL2_SMI_OP_BUSY | \
GLOBAL2_SMI_OP_CLAUSE_22)
#define GLOBAL2_SMI_OP_45_WRITE_ADDR ((0 << 10) | GLOBAL2_SMI_OP_BUSY)
#define GLOBAL2_SMI_OP_45_WRITE_DATA ((1 << 10) | GLOBAL2_SMI_OP_BUSY)
#define GLOBAL2_SMI_OP_45_READ_DATA ((2 << 10) | GLOBAL2_SMI_OP_BUSY)
#define GLOBAL2_SMI_DATA 0x19
#define GLOBAL2_SMI_PHY_CMD 0x18
#define GLOBAL2_SMI_PHY_CMD_BUSY BIT(15)
#define GLOBAL2_SMI_PHY_CMD_MODE_22 BIT(12)
#define GLOBAL2_SMI_PHY_CMD_OP_22_WRITE_DATA ((0x1 << 10) | \
GLOBAL2_SMI_PHY_CMD_MODE_22 | \
GLOBAL2_SMI_PHY_CMD_BUSY)
#define GLOBAL2_SMI_PHY_CMD_OP_22_READ_DATA ((0x2 << 10) | \
GLOBAL2_SMI_PHY_CMD_MODE_22 | \
GLOBAL2_SMI_PHY_CMD_BUSY)
#define GLOBAL2_SMI_PHY_DATA 0x19
#define GLOBAL2_SCRATCH_MISC 0x1a
#define GLOBAL2_SCRATCH_BUSY BIT(15)
#define GLOBAL2_SCRATCH_REGISTER_SHIFT 8
@ -384,10 +383,36 @@ enum mv88e6xxx_family {
};
enum mv88e6xxx_cap {
/* Two different tag protocols can be used by the driver. All
* switches support DSA, but only later generations support
* EDSA.
*/
MV88E6XXX_CAP_EDSA,
/* Energy Efficient Ethernet.
*/
MV88E6XXX_CAP_EEE,
/* Multi-chip Addressing Mode.
* Some chips respond to only 2 registers of its own SMI device address
* when it is non-zero, and use indirect access to internal registers.
*/
MV88E6XXX_CAP_SMI_CMD, /* (0x00) SMI Command */
MV88E6XXX_CAP_SMI_DATA, /* (0x01) SMI Data */
/* PHY Registers.
*/
MV88E6XXX_CAP_PHY_PAGE, /* (0x16) Page Register */
/* Fiber/SERDES Registers (SMI address F).
*/
MV88E6XXX_CAP_SERDES,
/* Switch Global (1) Registers.
*/
MV88E6XXX_CAP_G1_ATU_FID, /* (0x01) ATU FID Register */
MV88E6XXX_CAP_G1_VTU_FID, /* (0x02) VTU FID Register */
/* Switch Global 2 Registers.
* The device contains a second set of global 16-bit registers.
*/
@ -398,16 +423,7 @@ enum mv88e6xxx_cap {
MV88E6XXX_CAP_G2_IRL_DATA, /* (0x0a) Ingress Rate Data */
MV88E6XXX_CAP_G2_PVT_ADDR, /* (0x0b) Cross Chip Port VLAN Addr */
MV88E6XXX_CAP_G2_PVT_DATA, /* (0x0c) Cross Chip Port VLAN Data */
MV88E6XXX_CAP_G2_SWITCH_MAC, /* (0x0d) Switch MAC/WoL/WoF */
MV88E6XXX_CAP_G2_POT, /* (0x0f) Priority Override Table */
MV88E6XXX_CAP_G2_EEPROM_CMD, /* (0x14) EEPROM Command */
MV88E6XXX_CAP_G2_EEPROM_DATA, /* (0x15) EEPROM Data */
/* Multi-chip Addressing Mode.
* Some chips require an indirect SMI access when their SMI device
* address is not zero. See SMI_CMD and SMI_DATA.
*/
MV88E6XXX_CAP_MULTI_CHIP,
/* PHY Polling Unit.
* See GLOBAL_CONTROL_PPU_ENABLE and GLOBAL_STATUS_PPU_POLLING.
@ -415,12 +431,6 @@ enum mv88e6xxx_cap {
MV88E6XXX_CAP_PPU,
MV88E6XXX_CAP_PPU_ACTIVE,
/* SMI PHY Command and Data registers.
* This requires an indirect access to PHY registers through
* GLOBAL2_SMI_OP, otherwise direct access to PHY registers is done.
*/
MV88E6XXX_CAP_SMI_PHY,
/* Per VLAN Spanning Tree Unit (STU).
* The Port State database, if present, is accessed through VTU
* operations and dedicated SID registers. See GLOBAL_VTU_SID.
@ -440,130 +450,148 @@ enum mv88e6xxx_cap {
};
/* Bitmask of capabilities */
#define MV88E6XXX_FLAG_EEE BIT(MV88E6XXX_CAP_EEE)
#define MV88E6XXX_FLAG_GLOBAL2 BIT(MV88E6XXX_CAP_GLOBAL2)
#define MV88E6XXX_FLAG_G2_MGMT_EN_2X BIT(MV88E6XXX_CAP_G2_MGMT_EN_2X)
#define MV88E6XXX_FLAG_G2_MGMT_EN_0X BIT(MV88E6XXX_CAP_G2_MGMT_EN_0X)
#define MV88E6XXX_FLAG_G2_IRL_CMD BIT(MV88E6XXX_CAP_G2_IRL_CMD)
#define MV88E6XXX_FLAG_G2_IRL_DATA BIT(MV88E6XXX_CAP_G2_IRL_DATA)
#define MV88E6XXX_FLAG_G2_PVT_ADDR BIT(MV88E6XXX_CAP_G2_PVT_ADDR)
#define MV88E6XXX_FLAG_G2_PVT_DATA BIT(MV88E6XXX_CAP_G2_PVT_DATA)
#define MV88E6XXX_FLAG_G2_SWITCH_MAC BIT(MV88E6XXX_CAP_G2_SWITCH_MAC)
#define MV88E6XXX_FLAG_G2_POT BIT(MV88E6XXX_CAP_G2_POT)
#define MV88E6XXX_FLAG_G2_EEPROM_CMD BIT(MV88E6XXX_CAP_G2_EEPROM_CMD)
#define MV88E6XXX_FLAG_G2_EEPROM_DATA BIT(MV88E6XXX_CAP_G2_EEPROM_DATA)
#define MV88E6XXX_FLAG_MULTI_CHIP BIT(MV88E6XXX_CAP_MULTI_CHIP)
#define MV88E6XXX_FLAG_PPU BIT(MV88E6XXX_CAP_PPU)
#define MV88E6XXX_FLAG_PPU_ACTIVE BIT(MV88E6XXX_CAP_PPU_ACTIVE)
#define MV88E6XXX_FLAG_SMI_PHY BIT(MV88E6XXX_CAP_SMI_PHY)
#define MV88E6XXX_FLAG_STU BIT(MV88E6XXX_CAP_STU)
#define MV88E6XXX_FLAG_TEMP BIT(MV88E6XXX_CAP_TEMP)
#define MV88E6XXX_FLAG_TEMP_LIMIT BIT(MV88E6XXX_CAP_TEMP_LIMIT)
#define MV88E6XXX_FLAG_VTU BIT(MV88E6XXX_CAP_VTU)
#define MV88E6XXX_FLAG_EDSA BIT_ULL(MV88E6XXX_CAP_EDSA)
#define MV88E6XXX_FLAG_EEE BIT_ULL(MV88E6XXX_CAP_EEE)
/* EEPROM Programming via Global2 with 16-bit data */
#define MV88E6XXX_FLAGS_EEPROM16 \
(MV88E6XXX_FLAG_G2_EEPROM_CMD | \
MV88E6XXX_FLAG_G2_EEPROM_DATA)
#define MV88E6XXX_FLAG_SMI_CMD BIT_ULL(MV88E6XXX_CAP_SMI_CMD)
#define MV88E6XXX_FLAG_SMI_DATA BIT_ULL(MV88E6XXX_CAP_SMI_DATA)
#define MV88E6XXX_FLAG_PHY_PAGE BIT_ULL(MV88E6XXX_CAP_PHY_PAGE)
#define MV88E6XXX_FLAG_SERDES BIT_ULL(MV88E6XXX_CAP_SERDES)
#define MV88E6XXX_FLAG_G1_ATU_FID BIT_ULL(MV88E6XXX_CAP_G1_ATU_FID)
#define MV88E6XXX_FLAG_G1_VTU_FID BIT_ULL(MV88E6XXX_CAP_G1_VTU_FID)
#define MV88E6XXX_FLAG_GLOBAL2 BIT_ULL(MV88E6XXX_CAP_GLOBAL2)
#define MV88E6XXX_FLAG_G2_MGMT_EN_2X BIT_ULL(MV88E6XXX_CAP_G2_MGMT_EN_2X)
#define MV88E6XXX_FLAG_G2_MGMT_EN_0X BIT_ULL(MV88E6XXX_CAP_G2_MGMT_EN_0X)
#define MV88E6XXX_FLAG_G2_IRL_CMD BIT_ULL(MV88E6XXX_CAP_G2_IRL_CMD)
#define MV88E6XXX_FLAG_G2_IRL_DATA BIT_ULL(MV88E6XXX_CAP_G2_IRL_DATA)
#define MV88E6XXX_FLAG_G2_PVT_ADDR BIT_ULL(MV88E6XXX_CAP_G2_PVT_ADDR)
#define MV88E6XXX_FLAG_G2_PVT_DATA BIT_ULL(MV88E6XXX_CAP_G2_PVT_DATA)
#define MV88E6XXX_FLAG_G2_POT BIT_ULL(MV88E6XXX_CAP_G2_POT)
#define MV88E6XXX_FLAG_PPU BIT_ULL(MV88E6XXX_CAP_PPU)
#define MV88E6XXX_FLAG_PPU_ACTIVE BIT_ULL(MV88E6XXX_CAP_PPU_ACTIVE)
#define MV88E6XXX_FLAG_STU BIT_ULL(MV88E6XXX_CAP_STU)
#define MV88E6XXX_FLAG_TEMP BIT_ULL(MV88E6XXX_CAP_TEMP)
#define MV88E6XXX_FLAG_TEMP_LIMIT BIT_ULL(MV88E6XXX_CAP_TEMP_LIMIT)
#define MV88E6XXX_FLAG_VTU BIT_ULL(MV88E6XXX_CAP_VTU)
/* Ingress Rate Limit unit */
#define MV88E6XXX_FLAGS_IRL \
(MV88E6XXX_FLAG_G2_IRL_CMD | \
MV88E6XXX_FLAG_G2_IRL_DATA)
/* Multi-chip Addressing Mode */
#define MV88E6XXX_FLAGS_MULTI_CHIP \
(MV88E6XXX_FLAG_SMI_CMD | \
MV88E6XXX_FLAG_SMI_DATA)
/* Cross-chip Port VLAN Table */
#define MV88E6XXX_FLAGS_PVT \
(MV88E6XXX_FLAG_G2_PVT_ADDR | \
MV88E6XXX_FLAG_G2_PVT_DATA)
/* Fiber/SERDES Registers at SMI address F, page 1 */
#define MV88E6XXX_FLAGS_SERDES \
(MV88E6XXX_FLAG_PHY_PAGE | \
MV88E6XXX_FLAG_SERDES)
#define MV88E6XXX_FLAGS_FAMILY_6095 \
(MV88E6XXX_FLAG_GLOBAL2 | \
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAG_MULTI_CHIP | \
MV88E6XXX_FLAG_PPU | \
MV88E6XXX_FLAG_VTU)
MV88E6XXX_FLAG_VTU | \
MV88E6XXX_FLAGS_MULTI_CHIP)
#define MV88E6XXX_FLAGS_FAMILY_6097 \
(MV88E6XXX_FLAG_GLOBAL2 | \
(MV88E6XXX_FLAG_G1_ATU_FID | \
MV88E6XXX_FLAG_G1_VTU_FID | \
MV88E6XXX_FLAG_GLOBAL2 | \
MV88E6XXX_FLAG_G2_MGMT_EN_2X | \
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAG_G2_POT | \
MV88E6XXX_FLAG_MULTI_CHIP | \
MV88E6XXX_FLAG_PPU | \
MV88E6XXX_FLAG_STU | \
MV88E6XXX_FLAG_VTU | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP | \
MV88E6XXX_FLAGS_PVT)
#define MV88E6XXX_FLAGS_FAMILY_6165 \
(MV88E6XXX_FLAG_GLOBAL2 | \
(MV88E6XXX_FLAG_G1_ATU_FID | \
MV88E6XXX_FLAG_G1_VTU_FID | \
MV88E6XXX_FLAG_GLOBAL2 | \
MV88E6XXX_FLAG_G2_MGMT_EN_2X | \
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAG_G2_SWITCH_MAC | \
MV88E6XXX_FLAG_G2_POT | \
MV88E6XXX_FLAG_MULTI_CHIP | \
MV88E6XXX_FLAG_STU | \
MV88E6XXX_FLAG_TEMP | \
MV88E6XXX_FLAG_VTU | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP | \
MV88E6XXX_FLAGS_PVT)
#define MV88E6XXX_FLAGS_FAMILY_6185 \
(MV88E6XXX_FLAG_GLOBAL2 | \
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAG_MULTI_CHIP | \
MV88E6XXX_FLAGS_MULTI_CHIP | \
MV88E6XXX_FLAG_PPU | \
MV88E6XXX_FLAG_VTU)
#define MV88E6XXX_FLAGS_FAMILY_6320 \
(MV88E6XXX_FLAG_EEE | \
(MV88E6XXX_FLAG_EDSA | \
MV88E6XXX_FLAG_EEE | \
MV88E6XXX_FLAG_GLOBAL2 | \
MV88E6XXX_FLAG_G2_MGMT_EN_2X | \
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAG_G2_SWITCH_MAC | \
MV88E6XXX_FLAG_G2_POT | \
MV88E6XXX_FLAG_MULTI_CHIP | \
MV88E6XXX_FLAG_PPU_ACTIVE | \
MV88E6XXX_FLAG_SMI_PHY | \
MV88E6XXX_FLAG_TEMP | \
MV88E6XXX_FLAG_TEMP_LIMIT | \
MV88E6XXX_FLAG_VTU | \
MV88E6XXX_FLAGS_EEPROM16 | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP | \
MV88E6XXX_FLAGS_PVT)
#define MV88E6XXX_FLAGS_FAMILY_6351 \
(MV88E6XXX_FLAG_GLOBAL2 | \
(MV88E6XXX_FLAG_EDSA | \
MV88E6XXX_FLAG_G1_ATU_FID | \
MV88E6XXX_FLAG_G1_VTU_FID | \
MV88E6XXX_FLAG_GLOBAL2 | \
MV88E6XXX_FLAG_G2_MGMT_EN_2X | \
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAG_G2_SWITCH_MAC | \
MV88E6XXX_FLAG_G2_POT | \
MV88E6XXX_FLAG_MULTI_CHIP | \
MV88E6XXX_FLAG_PPU_ACTIVE | \
MV88E6XXX_FLAG_SMI_PHY | \
MV88E6XXX_FLAG_STU | \
MV88E6XXX_FLAG_TEMP | \
MV88E6XXX_FLAG_VTU | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_MULTI_CHIP | \
MV88E6XXX_FLAGS_PVT)
#define MV88E6XXX_FLAGS_FAMILY_6352 \
(MV88E6XXX_FLAG_EEE | \
(MV88E6XXX_FLAG_EDSA | \
MV88E6XXX_FLAG_EEE | \
MV88E6XXX_FLAG_G1_ATU_FID | \
MV88E6XXX_FLAG_G1_VTU_FID | \
MV88E6XXX_FLAG_GLOBAL2 | \
MV88E6XXX_FLAG_G2_MGMT_EN_2X | \
MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
MV88E6XXX_FLAG_G2_SWITCH_MAC | \
MV88E6XXX_FLAG_G2_POT | \
MV88E6XXX_FLAG_MULTI_CHIP | \
MV88E6XXX_FLAG_PPU_ACTIVE | \
MV88E6XXX_FLAG_SMI_PHY | \
MV88E6XXX_FLAG_STU | \
MV88E6XXX_FLAG_TEMP | \
MV88E6XXX_FLAG_TEMP_LIMIT | \
MV88E6XXX_FLAG_VTU | \
MV88E6XXX_FLAGS_EEPROM16 | \
MV88E6XXX_FLAGS_IRL | \
MV88E6XXX_FLAGS_PVT)
MV88E6XXX_FLAGS_MULTI_CHIP | \
MV88E6XXX_FLAGS_PVT | \
MV88E6XXX_FLAGS_SERDES)
struct mv88e6xxx_ops;
struct mv88e6xxx_info {
enum mv88e6xxx_family family;
@ -572,8 +600,10 @@ struct mv88e6xxx_info {
unsigned int num_databases;
unsigned int num_ports;
unsigned int port_base_addr;
unsigned int global1_addr;
unsigned int age_time_coeff;
unsigned long flags;
unsigned long long flags;
const struct mv88e6xxx_ops *ops;
};
struct mv88e6xxx_atu_entry {
@ -584,18 +614,15 @@ struct mv88e6xxx_atu_entry {
u8 mac[ETH_ALEN];
};
struct mv88e6xxx_vtu_stu_entry {
/* VTU only */
struct mv88e6xxx_vtu_entry {
u16 vid;
u16 fid;
/* VTU and STU */
u8 sid;
bool valid;
u8 data[DSA_MAX_PORTS];
};
struct mv88e6xxx_ops;
struct mv88e6xxx_bus_ops;
struct mv88e6xxx_priv_port {
struct net_device *bridge_dev;
@ -616,13 +643,14 @@ struct mv88e6xxx_chip {
/* The MII bus and the address on the bus that is used to
* communication with the switch
*/
const struct mv88e6xxx_ops *smi_ops;
const struct mv88e6xxx_bus_ops *smi_ops;
struct mii_bus *bus;
int sw_addr;
/* Handles automatic disabling and re-enabling of the PHY
* polling unit.
*/
const struct mv88e6xxx_bus_ops *phy_ops;
struct mutex ppu_mutex;
int ppu_disabled;
struct work_struct ppu_work;
@ -651,11 +679,25 @@ struct mv88e6xxx_chip {
struct mii_bus *mdio_bus;
};
struct mv88e6xxx_ops {
struct mv88e6xxx_bus_ops {
int (*read)(struct mv88e6xxx_chip *chip, int addr, int reg, u16 *val);
int (*write)(struct mv88e6xxx_chip *chip, int addr, int reg, u16 val);
};
struct mv88e6xxx_ops {
int (*get_eeprom)(struct mv88e6xxx_chip *chip,
struct ethtool_eeprom *eeprom, u8 *data);
int (*set_eeprom)(struct mv88e6xxx_chip *chip,
struct ethtool_eeprom *eeprom, u8 *data);
int (*set_switch_mac)(struct mv88e6xxx_chip *chip, u8 *addr);
int (*phy_read)(struct mv88e6xxx_chip *chip, int addr, int reg,
u16 *val);
int (*phy_write)(struct mv88e6xxx_chip *chip, int addr, int reg,
u16 val);
};
enum stat_type {
BANK0,
BANK1,
@ -675,4 +717,20 @@ static inline bool mv88e6xxx_has(struct mv88e6xxx_chip *chip,
return (chip->info->flags & flags) == flags;
}
static inline unsigned int mv88e6xxx_num_databases(struct mv88e6xxx_chip *chip)
{
return chip->info->num_databases;
}
static inline unsigned int mv88e6xxx_num_ports(struct mv88e6xxx_chip *chip)
{
return chip->info->num_ports;
}
int mv88e6xxx_read(struct mv88e6xxx_chip *chip, int addr, int reg, u16 *val);
int mv88e6xxx_write(struct mv88e6xxx_chip *chip, int addr, int reg, u16 val);
int mv88e6xxx_update(struct mv88e6xxx_chip *chip, int addr, int reg,
u16 update);
int mv88e6xxx_wait(struct mv88e6xxx_chip *chip, int addr, int reg, u16 mask);
#endif

1040
drivers/net/dsa/qca8k.c Normal file
View File

File diff suppressed because it is too large Load Diff

Some files were not shown because too many files have changed in this diff Show More