ARM: at91: dt: add device tree files for SAMA5D3 family
Add device tree files for the SAMA5D3 family (SAMA5D31, SAMA5D33, SAMA5D34 and SAMA5D35). Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
This commit is contained in:
Ludovic Desroches
Nicolas Ferre
parent
8f4b47949f
commit
655ff26699
|
|
@ -31,6 +31,11 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb
|
|||
dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
|
||||
dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb
|
||||
dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
|
||||
# sama5d3
|
||||
dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb
|
||||
dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb
|
||||
dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb
|
||||
dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb
|
||||
|
||||
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
|
||||
dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,51 @@
|
|||
/*
|
||||
* sama5d31ek.dts - Device Tree file for SAMA5D31-EK board
|
||||
*
|
||||
* Copyright (C) 2013 Atmel,
|
||||
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
|
||||
*
|
||||
* Licensed under GPLv2 or later.
|
||||
*/
|
||||
/dts-v1/;
|
||||
/include/ "sama5d3xmb.dtsi"
|
||||
/include/ "sama5d3xdm.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Atmel SAMA5D31-EK";
|
||||
compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
spi0: spi@f0004000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ssc0: ssc@f0008000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c0: i2c@f0014000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c1: i2c@f0018000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
macb1: ethernet@f802c000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
d3 {
|
||||
label = "d3";
|
||||
gpios = <&pioE 24 0>;
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,44 @@
|
|||
/*
|
||||
* sama5d33ek.dts - Device Tree file for SAMA5D33-EK board
|
||||
*
|
||||
* Copyright (C) 2013 Atmel,
|
||||
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
|
||||
*
|
||||
* Licensed under GPLv2 or later.
|
||||
*/
|
||||
/dts-v1/;
|
||||
/include/ "sama5d3xmb.dtsi"
|
||||
/include/ "sama5d3xdm.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Atmel SAMA5D33-EK";
|
||||
compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
spi0: spi@f0004000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ssc0: ssc@f0008000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c0: i2c@f0014000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c1: i2c@f0018000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
macb0: ethernet@f0028000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,61 @@
|
|||
/*
|
||||
* sama5d34ek.dts - Device Tree file for SAMA5D34-EK board
|
||||
*
|
||||
* Copyright (C) 2013 Atmel,
|
||||
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
|
||||
*
|
||||
* Licensed under GPLv2 or later.
|
||||
*/
|
||||
/dts-v1/;
|
||||
/include/ "sama5d3xmb.dtsi"
|
||||
/include/ "sama5d3xdm.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Atmel SAMA5D34-EK";
|
||||
compatible = "atmel,sama5d34ek", "atmel,sama5ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
spi0: spi@f0004000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ssc0: ssc@f0008000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
can0: can@f000c000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c0: i2c@f0014000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c1: i2c@f0018000 {
|
||||
status = "okay";
|
||||
|
||||
24c256@50 {
|
||||
compatible = "24c256";
|
||||
reg = <0x50>;
|
||||
pagesize = <64>;
|
||||
};
|
||||
};
|
||||
|
||||
macb0: ethernet@f0028000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
d3 {
|
||||
label = "d3";
|
||||
gpios = <&pioE 24 0>;
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,56 @@
|
|||
/*
|
||||
* sama5d35ek.dts - Device Tree file for SAMA5D35-EK board
|
||||
*
|
||||
* Copyright (C) 2013 Atmel,
|
||||
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
|
||||
*
|
||||
* Licensed under GPLv2 or later.
|
||||
*/
|
||||
/dts-v1/;
|
||||
/include/ "sama5d3xmb.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Atmel SAMA5D35-EK";
|
||||
compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
spi0: spi@f0004000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
can0: can@f000c000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c1: i2c@f0018000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
macb0: ethernet@f0028000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
isi: isi@f0034000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
macb1: ethernet@f802c000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pb_user1 {
|
||||
label = "pb_user1";
|
||||
gpios = <&pioE 27 0>;
|
||||
linux,code = <0x100>;
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,91 @@
|
|||
/*
|
||||
* sama5d3xcm.dtsi - Device Tree Include file for SAMA5D3x CPU Module
|
||||
*
|
||||
* Copyright (C) 2013 Atmel,
|
||||
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
|
||||
*
|
||||
* Licensed under GPLv2 or later.
|
||||
*/
|
||||
/include/ "sama5d3.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "atmel,samad3xcm", "atmel,sama5d3", "atmel,sama5";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x20000000 0x20000000>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
main_clock: clock@0 {
|
||||
compatible = "atmel,osc", "fixed-clock";
|
||||
clock-frequency = <12000000>;
|
||||
};
|
||||
};
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
macb0: ethernet@f0028000 {
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
};
|
||||
|
||||
nand0: nand@60000000 {
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-mode = "hw";
|
||||
atmel,has-pmecc;
|
||||
atmel,pmecc-cap = <4>;
|
||||
atmel,pmecc-sector-size = <512>;
|
||||
atmel,has-nfc;
|
||||
atmel,use-nfc-sram;
|
||||
nand-on-flash-bbt;
|
||||
status = "okay";
|
||||
|
||||
at91bootstrap@0 {
|
||||
label = "at91bootstrap";
|
||||
reg = <0x0 0x40000>;
|
||||
};
|
||||
|
||||
bootloader@40000 {
|
||||
label = "bootloader";
|
||||
reg = <0x40000 0x80000>;
|
||||
};
|
||||
|
||||
bootloaderenv@c0000 {
|
||||
label = "bootloader env";
|
||||
reg = <0xc0000 0xc0000>;
|
||||
};
|
||||
|
||||
dtb@180000 {
|
||||
label = "device tree";
|
||||
reg = <0x180000 0x80000>;
|
||||
};
|
||||
|
||||
kernel@200000 {
|
||||
label = "kernel";
|
||||
reg = <0x200000 0x600000>;
|
||||
};
|
||||
|
||||
rootfs@800000 {
|
||||
label = "rootfs";
|
||||
reg = <0x800000 0x0f800000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
d2 {
|
||||
label = "d2";
|
||||
gpios = <&pioE 25 1>; /* PE25, conflicts with A25, RXD2 */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,42 @@
|
|||
/*
|
||||
* sama5d3dm.dtsi - Device Tree file for SAMA5 display module
|
||||
*
|
||||
* Copyright (C) 2013 Atmel,
|
||||
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
|
||||
*
|
||||
* Licensed under GPLv2 or later.
|
||||
*/
|
||||
|
||||
/ {
|
||||
ahb {
|
||||
apb {
|
||||
i2c1: i2c@f0018000 {
|
||||
qt1070: keyboard@1b {
|
||||
compatible = "qt1070";
|
||||
reg = <0x1b>;
|
||||
interrupt-parent = <&pioE>;
|
||||
interrupts = <31 0x0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_qt1070_irq>;
|
||||
};
|
||||
};
|
||||
|
||||
adc0: adc@f8018000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
tsadcc: tsadcc@f8018000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pinctrl@fffff200 {
|
||||
board {
|
||||
pinctrl_qt1070_irq: qt1070_irq {
|
||||
atmel,pins =
|
||||
<4 31 0x0 0x5>; /* PE31 GPIO with pull up deglith */
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,166 @@
|
|||
/*
|
||||
* sama5d3xmb.dts - Device Tree file for SAMA5D3x mother board
|
||||
*
|
||||
* Copyright (C) 2013 Atmel,
|
||||
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
|
||||
*
|
||||
* Licensed under GPLv2 or later.
|
||||
*/
|
||||
/include/ "sama5d3xcm.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
mmc0: mmc@f0000000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
|
||||
status = "okay";
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&pioD 17 0>;
|
||||
};
|
||||
};
|
||||
|
||||
spi0: spi@f0004000 {
|
||||
m25p80@0 {
|
||||
compatible = "atmel,at25df321a";
|
||||
spi-max-frequency = <50000000>;
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* i2c0 conflicts with ISI:
|
||||
* disable it to allow the use of ISI
|
||||
* can not enable audio when i2c0 disabled
|
||||
*/
|
||||
i2c0: i2c@f0014000 {
|
||||
wm8904: wm8904@1a {
|
||||
compatible = "wm8904";
|
||||
reg = <0x1a>;
|
||||
};
|
||||
};
|
||||
|
||||
usart1: serial@f0020000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
isi: isi@f0034000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_isi &pinctrl_isi_pck_as_mck &pinctrl_isi_power &pinctrl_isi_reset>;
|
||||
};
|
||||
|
||||
mmc1: mmc@f8000000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
|
||||
status = "okay";
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&pioD 18 0>;
|
||||
};
|
||||
};
|
||||
|
||||
adc0: adc@f8018000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <
|
||||
&pinctrl_adc0_adtrg
|
||||
&pinctrl_adc0_ad0
|
||||
&pinctrl_adc0_ad1
|
||||
&pinctrl_adc0_ad2
|
||||
&pinctrl_adc0_ad3
|
||||
&pinctrl_adc0_ad4
|
||||
>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
macb1: ethernet@f802c000 {
|
||||
phy-mode = "rmii";
|
||||
};
|
||||
|
||||
pinctrl@fffff200 {
|
||||
board {
|
||||
pinctrl_mmc0_cd: mmc0_cd {
|
||||
atmel,pins =
|
||||
<3 17 0x0 0x5>; /* PD17 GPIO with pullup deglitch */
|
||||
};
|
||||
|
||||
pinctrl_mmc1_cd: mmc1_cd {
|
||||
atmel,pins =
|
||||
<3 18 0x0 0x5>; /* PD18 GPIO with pullup deglitch */
|
||||
};
|
||||
|
||||
pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
|
||||
atmel,pins =
|
||||
<3 30 0x2 0x0>; /* PD30 periph B */
|
||||
};
|
||||
|
||||
pinctrl_isi_reset: isi_reset-0 {
|
||||
atmel,pins =
|
||||
<4 24 0x0 0x0>; /* PE24 gpio */
|
||||
};
|
||||
|
||||
pinctrl_isi_power: isi_power-0 {
|
||||
atmel,pins =
|
||||
<4 29 0x0 0x0>; /* PE29 gpio */
|
||||
};
|
||||
|
||||
pinctrl_usba_vbus: usba_vbus {
|
||||
atmel,pins =
|
||||
<3 29 0x0 0x4>; /* PD29 GPIO with deglitch */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
dbgu: serial@ffffee00 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
watchdog@fffffe40 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
usb0: gadget@00500000 {
|
||||
atmel,vbus-gpio = <&pioD 29 0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usba_vbus>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb1: ohci@00600000 {
|
||||
num-ports = <3>;
|
||||
atmel,vbus-gpio = <&pioD 25 0
|
||||
&pioD 26 1
|
||||
&pioD 27 1
|
||||
>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb2: ehci@00700000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "atmel,sama5d3ek-wm8904";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
|
||||
|
||||
atmel,model = "wm8904 @ SAMA5D3EK";
|
||||
atmel,audio-routing =
|
||||
"Headphone Jack", "HPOUTL",
|
||||
"Headphone Jack", "HPOUTR",
|
||||
"IN2L", "Line In Jack",
|
||||
"IN2R", "Line In Jack",
|
||||
"IN1L", "Mic";
|
||||
|
||||
atmel,ssc-controller = <&ssc0>;
|
||||
atmel,audio-codec = <&wm8904>;
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue