From 649627245cc439fddef2096bf646cb3558e13803 Mon Sep 17 00:00:00 2001 From: Amelie Delaunay Date: Tue, 5 Jan 2021 10:05:24 +0100 Subject: [PATCH] phy: stm32: ensure phy are no more active when removing the driver To ensure a good balancing of regulators, and allow PLL disabling when the driver is removed, call stm32_usbphyc_phy_exit on each ports to set phys inactive and disable PLL. Signed-off-by: Amelie Delaunay Link: https://lore.kernel.org/r/20210105090525.23164-6-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul --- drivers/phy/st/phy-stm32-usbphyc.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c index 33367a325612..8b11d95b2c20 100644 --- a/drivers/phy/st/phy-stm32-usbphyc.c +++ b/drivers/phy/st/phy-stm32-usbphyc.c @@ -470,6 +470,12 @@ clk_disable: static int stm32_usbphyc_remove(struct platform_device *pdev) { struct stm32_usbphyc *usbphyc = dev_get_drvdata(&pdev->dev); + int port; + + /* Ensure PHYs are not active, to allow PLL disabling */ + for (port = 0; port < usbphyc->nphys; port++) + if (usbphyc->phys[port]->active) + stm32_usbphyc_phy_exit(usbphyc->phys[port]->phy); clk_disable_unprepare(usbphyc->clk);