arm64: dts: ti: j784s4: Add VTM node

VTM stands for Voltage Thermal Management. Add the thermal zones.
Seven sensors mapping to seven thermal zones. Main0, Main1, Main2, Main3,
Main4, WKUP1 & WKUP2 domains respectively.

Signed-off-by: Keerthy <j-keerthy@ti.com>
[bb@ti.com: rebased on v6.3-rc1]
Signed-off-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20230405215328.3755561-5-bb@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi

@@ -382,4 +382,12 @@
 			ti,loczrama = <1>;
 		};
 	};
+
+	wkup_vtm0: temperature-sensor@42040000 {
+		compatible = "ti,j7200-vtm";
+		reg = <0x00 0x42040000 0x00 0x350>,
+		      <0x00 0x42050000 0x00 0x350>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_SHARED>;
+		#thermal-sensor-cells = <1>;
+	};
 };

arch/arm64/boot/dts/ti/k3-j784s4-thermal.dtsi

@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+wkup0_thermal: wkup0-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 0>;
+
+	trips {
+		wkup0_crit: wkup0-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+wkup1_thermal: wkup1-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 1>;
+
+	trips {
+		wkup1_crit: wkup1-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+main0_thermal: main0-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 2>;
+
+	trips {
+		main0_crit: main0-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+main1_thermal: main1-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 3>;
+
+	trips {
+		main1_crit: main1-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+main2_thermal: main2-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 4>;
+
+	trips {
+		main2_crit: main2-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+main3_thermal: main3-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 5>;
+
+	trips {
+		main3_crit: main3-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+main4_thermal: main4-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 6>;
+
+	trips {
+		main4_crit: main4-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};

arch/arm64/boot/dts/ti/k3-j784s4.dtsi

@@ -281,6 +281,10 @@
 				 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		#include "k3-j784s4-thermal.dtsi"
+	};
 };
 
 /* Now include peripherals from each bus segment */