dt-bindings: input: touchscreen: ilitek_ts_i2c: Absorb ili2xxx bindings

While Linux uses a different driver, the Ilitek
ILI210x/ILI2117/ILI2120/ILI251x touchscreen controller Device Tree
binding documentation is very similar.

  - Drop the fixed reg value, as some controllers use a different
    address,
  - Make reset-gpios optional, as it is not always wired.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/0c5f06c9d262c1720b40d068b6eefe58ca406601.1638539806.git.geert+renesas@glider.be
This commit is contained in:
Geert Uytterhoeven 2021-12-03 14:58:26 +01:00 committed by Rob Herring
parent ee77ef0d09
commit 644291ebec
2 changed files with 5 additions and 29 deletions

View File

@ -1,27 +0,0 @@
Ilitek ILI210x/ILI2117/ILI2120/ILI251x touchscreen controller
Required properties:
- compatible:
ilitek,ili210x for ILI210x
ilitek,ili2117 for ILI2117
ilitek,ili2120 for ILI2120
ilitek,ili251x for ILI251x
- reg: The I2C address of the device
- interrupts: The sink for the touchscreen's IRQ output
See ../interrupt-controller/interrupts.txt
Optional properties for main touchpad device:
- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low)
Example:
touchscreen@41 {
compatible = "ilitek,ili251x";
reg = <0x41>;
interrupt-parent = <&gpio4>;
interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
};

View File

@ -15,6 +15,9 @@ allOf:
properties:
compatible:
enum:
- ilitek,ili210x
- ilitek,ili2117
- ilitek,ili2120
- ilitek,ili2130
- ilitek,ili2131
- ilitek,ili2132
@ -22,11 +25,12 @@ properties:
- ilitek,ili2322
- ilitek,ili2323
- ilitek,ili2326
- ilitek,ili251x
- ilitek,ili2520
- ilitek,ili2521
reg:
const: 0x41
maxItems: 1
interrupts:
maxItems: 1
@ -50,7 +54,6 @@ required:
- compatible
- reg
- interrupts
- reset-gpios
examples:
- |