[WATCHDOG] w83697ug: add error checking
I noticed the W83697UG driver tries to register a watchdog even though it already noticed the chip isn't there. WDT driver for the Winbond(TM) W83697UG/UF Super I/O chip initialising. w83697ug/uf WDT: No W83697UG/UF could be found w83697ug/uf WDT: Watchdog already running. Resetting timeout to 60 sec w83697ug/uf WDT: cannot register miscdev on minor=130 (err=-16) Patch propagates the error back to wdt_init(). Signed-off-by: Eric Lammerts <eric@lammerts.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
This commit is contained in:
parent
9626dd75c5
commit
63bad1452e
|
@ -79,7 +79,7 @@ MODULE_PARM_DESC(nowayout,
|
|||
(same as EFER) */
|
||||
#define WDT_EFDR (WDT_EFIR+1) /* Extended Function Data Register */
|
||||
|
||||
static void w83697ug_select_wd_register(void)
|
||||
static int w83697ug_select_wd_register(void)
|
||||
{
|
||||
unsigned char c;
|
||||
unsigned char version;
|
||||
|
@ -102,7 +102,7 @@ static void w83697ug_select_wd_register(void)
|
|||
|
||||
} else {
|
||||
printk(KERN_ERR PFX "No W83697UG/UF could be found\n");
|
||||
return;
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
outb_p(0x07, WDT_EFER); /* point to logical device number reg */
|
||||
|
@ -110,6 +110,8 @@ static void w83697ug_select_wd_register(void)
|
|||
outb_p(0x30, WDT_EFER); /* select CR30 */
|
||||
c = inb_p(WDT_EFDR);
|
||||
outb_p(c || 0x01, WDT_EFDR); /* set bit 0 to activate GPIO2 */
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void w83697ug_unselect_wd_register(void)
|
||||
|
@ -117,11 +119,14 @@ static void w83697ug_unselect_wd_register(void)
|
|||
outb_p(0xAA, WDT_EFER); /* Leave extended function mode */
|
||||
}
|
||||
|
||||
static void w83697ug_init(void)
|
||||
static int w83697ug_init(void)
|
||||
{
|
||||
int ret;
|
||||
unsigned char t;
|
||||
|
||||
w83697ug_select_wd_register();
|
||||
ret = w83697ug_select_wd_register();
|
||||
if (ret != 0)
|
||||
return ret;
|
||||
|
||||
outb_p(0xF6, WDT_EFER); /* Select CRF6 */
|
||||
t = inb_p(WDT_EFDR); /* read CRF6 */
|
||||
|
@ -137,13 +142,15 @@ static void w83697ug_init(void)
|
|||
outb_p(t, WDT_EFDR); /* Write back to CRF5 */
|
||||
|
||||
w83697ug_unselect_wd_register();
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void wdt_ctrl(int timeout)
|
||||
{
|
||||
spin_lock(&io_lock);
|
||||
|
||||
w83697ug_select_wd_register();
|
||||
if (w83697ug_select_wd_register() < 0)
|
||||
return;
|
||||
|
||||
outb_p(0xF4, WDT_EFER); /* Select CRF4 */
|
||||
outb_p(timeout, WDT_EFDR); /* Write Timeout counter to CRF4 */
|
||||
|
@ -347,7 +354,9 @@ static int __init wdt_init(void)
|
|||
goto out;
|
||||
}
|
||||
|
||||
w83697ug_init();
|
||||
ret = w83697ug_init();
|
||||
if (ret != 0)
|
||||
goto unreg_regions;
|
||||
|
||||
ret = register_reboot_notifier(&wdt_notifier);
|
||||
if (ret != 0) {
|
||||
|
|
Loading…
Reference in New Issue