Merge remote-tracking branches 'regulator/topic/supply', 'regulator/topic/tps6105x' and 'regulator/topic/tps65023' into regulator-next

Documentation/devicetree/bindings/regulator/tps65023.txt

@@ -0,0 +1,60 @@
+TPS65023 family of regulators
+
+Required properties:
+- compatible: Must be one of the following.
+	"ti,tps65020",
+	"ti,tps65021",
+	"ti,tps65023",
+- reg: I2C slave address
+- regulators: list of regulators provided by this controller, must be named
+  after their hardware counterparts: VDCDC[1-3] and LDO[1-2]
+- regulators: This is the list of child nodes that specify the regulator
+  initialization data for defined regulators. The definition for each of
+  these nodes is defined using the standard binding for regulators found at
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+	tps65023@48 {
+		compatible = "ti,tps65023";
+		reg = <0x48>;
+
+		regulators {
+			VDCDC1 {
+				regulator-name = "vdd_mpu";
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			VDCDC2 {
+				regulator-name = "vdd_core";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			VDCDC3 {
+				regulator-name = "vdd_io";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			LDO1 {
+				regulator-name = "vdd_usb18";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			LDO2 {
+				regulator-name = "vdd_usb33";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};

drivers/mfd/tps6105x.c

@@ -16,7 +16,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
-#include <linux/mutex.h>
+#include <linux/regmap.h>
 #include <linux/gpio.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
@@ -25,73 +25,18 @@
 #include <linux/mfd/core.h>
 #include <linux/mfd/tps6105x.h>
 
-int tps6105x_set(struct tps6105x *tps6105x, u8 reg, u8 value)
+static struct regmap_config tps6105x_regmap_config = {
-{
+	.reg_bits = 8,
-	int ret;
+	.val_bits = 8,
-
+	.max_register = TPS6105X_REG_3,
-	ret = mutex_lock_interruptible(&tps6105x->lock);
+};
-	if (ret)
-		return ret;
-	ret = i2c_smbus_write_byte_data(tps6105x->client, reg, value);
-	mutex_unlock(&tps6105x->lock);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-EXPORT_SYMBOL(tps6105x_set);
-
-int tps6105x_get(struct tps6105x *tps6105x, u8 reg, u8 *buf)
-{
-	int ret;
-
-	ret = mutex_lock_interruptible(&tps6105x->lock);
-	if (ret)
-		return ret;
-	ret = i2c_smbus_read_byte_data(tps6105x->client, reg);
-	mutex_unlock(&tps6105x->lock);
-	if (ret < 0)
-		return ret;
-
-	*buf = ret;
-	return 0;
-}
-EXPORT_SYMBOL(tps6105x_get);
-
-/*
- * Masks off the bits in the mask and sets the bits in the bitvalues
- * parameter in one atomic operation
- */
-int tps6105x_mask_and_set(struct tps6105x *tps6105x, u8 reg,
-			  u8 bitmask, u8 bitvalues)
-{
-	int ret;
-	u8 regval;
-
-	ret = mutex_lock_interruptible(&tps6105x->lock);
-	if (ret)
-		return ret;
-	ret = i2c_smbus_read_byte_data(tps6105x->client, reg);
-	if (ret < 0)
-		goto fail;
-	regval = ret;
-	regval = (~bitmask & regval) | (bitmask & bitvalues);
-	ret = i2c_smbus_write_byte_data(tps6105x->client, reg, regval);
-fail:
-	mutex_unlock(&tps6105x->lock);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-EXPORT_SYMBOL(tps6105x_mask_and_set);
 
 static int tps6105x_startup(struct tps6105x *tps6105x)
 {
 	int ret;
-	u8 regval;
+	unsigned int regval;
 
-	ret = tps6105x_get(tps6105x, TPS6105X_REG_0, &regval);
+	ret = regmap_read(tps6105x->regmap, TPS6105X_REG_0, &regval);
 	if (ret)
 		return ret;
 	switch (regval >> TPS6105X_REG0_MODE_SHIFT) {
@@ -145,11 +90,14 @@ static int tps6105x_probe(struct i2c_client *client,
 	if (!tps6105x)
 		return -ENOMEM;
 
+	tps6105x->regmap = devm_regmap_init_i2c(client, &tps6105x_regmap_config);
+	if (IS_ERR(tps6105x->regmap))
+		return PTR_ERR(tps6105x->regmap);
+
 	i2c_set_clientdata(client, tps6105x);
 	tps6105x->client = client;
 	pdata = dev_get_platdata(&client->dev);
 	tps6105x->pdata = pdata;
-	mutex_init(&tps6105x->lock);
 
 	ret = tps6105x_startup(tps6105x);
 	if (ret) {
@@ -198,7 +146,7 @@ static int tps6105x_remove(struct i2c_client *client)
 	mfd_remove_devices(&client->dev);
 
 	/* Put chip in shutdown mode */
-	tps6105x_mask_and_set(tps6105x, TPS6105X_REG_0,
+	regmap_update_bits(tps6105x->regmap, TPS6105X_REG_0,
 		TPS6105X_REG0_MODE_MASK,
 		TPS6105X_MODE_SHUTDOWN << TPS6105X_REG0_MODE_SHIFT);
 

drivers/regulator/core.c

@@ -132,6 +132,45 @@ static bool have_full_constraints(void)
 	return has_full_constraints || of_have_populated_dt();
 }
 
+/**
+ * regulator_lock_supply - lock a regulator and its supplies
+ * @rdev:         regulator source
+ */
+static void regulator_lock_supply(struct regulator_dev *rdev)
+{
+	struct regulator *supply;
+	int i = 0;
+
+	while (1) {
+		mutex_lock_nested(&rdev->mutex, i++);
+		supply = rdev->supply;
+
+		if (!rdev->supply)
+			return;
+
+		rdev = supply->rdev;
+	}
+}
+
+/**
+ * regulator_unlock_supply - unlock a regulator and its supplies
+ * @rdev:         regulator source
+ */
+static void regulator_unlock_supply(struct regulator_dev *rdev)
+{
+	struct regulator *supply;
+
+	while (1) {
+		mutex_unlock(&rdev->mutex);
+		supply = rdev->supply;
+
+		if (!rdev->supply)
+			return;
+
+		rdev = supply->rdev;
+	}
+}
+
 /**
  * of_get_regulator - get a regulator device node based on supply name
  * @dev: Device pointer for the consumer (of regulator) device
@@ -2364,6 +2403,40 @@ static int _regulator_is_enabled(struct regulator_dev *rdev)
 	return rdev->desc->ops->is_enabled(rdev);
 }
 
+static int _regulator_list_voltage(struct regulator *regulator,
+				    unsigned selector, int lock)
+{
+	struct regulator_dev *rdev = regulator->rdev;
+	const struct regulator_ops *ops = rdev->desc->ops;
+	int ret;
+
+	if (rdev->desc->fixed_uV && rdev->desc->n_voltages == 1 && !selector)
+		return rdev->desc->fixed_uV;
+
+	if (ops->list_voltage) {
+		if (selector >= rdev->desc->n_voltages)
+			return -EINVAL;
+		if (lock)
+			mutex_lock(&rdev->mutex);
+		ret = ops->list_voltage(rdev, selector);
+		if (lock)
+			mutex_unlock(&rdev->mutex);
+	} else if (rdev->supply) {
+		ret = _regulator_list_voltage(rdev->supply, selector, lock);
+	} else {
+		return -EINVAL;
+	}
+
+	if (ret > 0) {
+		if (ret < rdev->constraints->min_uV)
+			ret = 0;
+		else if (ret > rdev->constraints->max_uV)
+			ret = 0;
+	}
+
+	return ret;
+}
+
 /**
  * regulator_is_enabled - is the regulator output enabled
  * @regulator: regulator source
@@ -2453,33 +2526,7 @@ EXPORT_SYMBOL_GPL(regulator_count_voltages);
  */
 int regulator_list_voltage(struct regulator *regulator, unsigned selector)
 {
-	struct regulator_dev *rdev = regulator->rdev;
+	return _regulator_list_voltage(regulator, selector, 1);
-	const struct regulator_ops *ops = rdev->desc->ops;
-	int ret;
-
-	if (rdev->desc->fixed_uV && rdev->desc->n_voltages == 1 && !selector)
-		return rdev->desc->fixed_uV;
-
-	if (ops->list_voltage) {
-		if (selector >= rdev->desc->n_voltages)
-			return -EINVAL;
-		mutex_lock(&rdev->mutex);
-		ret = ops->list_voltage(rdev, selector);
-		mutex_unlock(&rdev->mutex);
-	} else if (rdev->supply) {
-		ret = regulator_list_voltage(rdev->supply, selector);
-	} else {
-		return -EINVAL;
-	}
-
-	if (ret > 0) {
-		if (ret < rdev->constraints->min_uV)
-			ret = 0;
-		else if (ret > rdev->constraints->max_uV)
-			ret = 0;
-	}
-
-	return ret;
 }
 EXPORT_SYMBOL_GPL(regulator_list_voltage);
 
@@ -2614,6 +2661,23 @@ int regulator_is_supported_voltage(struct regulator *regulator,
 }
 EXPORT_SYMBOL_GPL(regulator_is_supported_voltage);
 
+static int regulator_map_voltage(struct regulator_dev *rdev, int min_uV,
+				 int max_uV)
+{
+	const struct regulator_desc *desc = rdev->desc;
+
+	if (desc->ops->map_voltage)
+		return desc->ops->map_voltage(rdev, min_uV, max_uV);
+
+	if (desc->ops->list_voltage == regulator_list_voltage_linear)
+		return regulator_map_voltage_linear(rdev, min_uV, max_uV);
+
+	if (desc->ops->list_voltage == regulator_list_voltage_linear_range)
+		return regulator_map_voltage_linear_range(rdev, min_uV, max_uV);
+
+	return regulator_map_voltage_iterate(rdev, min_uV, max_uV);
+}
+
 static int _regulator_call_set_voltage(struct regulator_dev *rdev,
 				       int min_uV, int max_uV,
 				       unsigned *selector)
@@ -2702,23 +2766,7 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 		}
 
 	} else if (rdev->desc->ops->set_voltage_sel) {
-		if (rdev->desc->ops->map_voltage) {
+		ret = regulator_map_voltage(rdev, min_uV, max_uV);
-			ret = rdev->desc->ops->map_voltage(rdev, min_uV,
-							   max_uV);
-		} else {
-			if (rdev->desc->ops->list_voltage ==
-			    regulator_list_voltage_linear)
-				ret = regulator_map_voltage_linear(rdev,
-								min_uV, max_uV);
-			else if (rdev->desc->ops->list_voltage ==
-				 regulator_list_voltage_linear_range)
-				ret = regulator_map_voltage_linear_range(rdev,
-								min_uV, max_uV);
-			else
-				ret = regulator_map_voltage_iterate(rdev,
-								min_uV, max_uV);
-		}
-
 		if (ret >= 0) {
 			best_val = rdev->desc->ops->list_voltage(rdev, ret);
 			if (min_uV <= best_val && max_uV >= best_val) {
@@ -2769,32 +2817,15 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 	return ret;
 }
 
-/**
+static int regulator_set_voltage_unlocked(struct regulator *regulator,
- * regulator_set_voltage - set regulator output voltage
+					  int min_uV, int max_uV)
- * @regulator: regulator source
- * @min_uV: Minimum required voltage in uV
- * @max_uV: Maximum acceptable voltage in uV
- *
- * Sets a voltage regulator to the desired output voltage. This can be set
- * during any regulator state. IOW, regulator can be disabled or enabled.
- *
- * If the regulator is enabled then the voltage will change to the new value
- * immediately otherwise if the regulator is disabled the regulator will
- * output at the new voltage when enabled.
- *
- * NOTE: If the regulator is shared between several devices then the lowest
- * request voltage that meets the system constraints will be used.
- * Regulator system constraints must be set for this regulator before
- * calling this function otherwise this call will fail.
- */
-int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
 {
 	struct regulator_dev *rdev = regulator->rdev;
 	int ret = 0;
 	int old_min_uV, old_max_uV;
 	int current_uV;
-
+	int best_supply_uV = 0;
-	mutex_lock(&rdev->mutex);
+	int supply_change_uV = 0;
 
 	/* If we're setting the same range as last time the change
 	 * should be a noop (some cpufreq implementations use the same
@@ -2838,17 +2869,95 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
 	if (ret < 0)
 		goto out2;
 
+	if (rdev->supply && (rdev->desc->min_dropout_uV ||
+				!rdev->desc->ops->get_voltage)) {
+		int current_supply_uV;
+		int selector;
+
+		selector = regulator_map_voltage(rdev, min_uV, max_uV);
+		if (selector < 0) {
+			ret = selector;
+			goto out2;
+		}
+
+		best_supply_uV = _regulator_list_voltage(regulator, selector, 0);
+		if (best_supply_uV < 0) {
+			ret = best_supply_uV;
+			goto out2;
+		}
+
+		best_supply_uV += rdev->desc->min_dropout_uV;
+
+		current_supply_uV = _regulator_get_voltage(rdev->supply->rdev);
+		if (current_supply_uV < 0) {
+			ret = current_supply_uV;
+			goto out2;
+		}
+
+		supply_change_uV = best_supply_uV - current_supply_uV;
+	}
+
+	if (supply_change_uV > 0) {
+		ret = regulator_set_voltage_unlocked(rdev->supply,
+				best_supply_uV, INT_MAX);
+		if (ret) {
+			dev_err(&rdev->dev, "Failed to increase supply voltage: %d\n",
+					ret);
+			goto out2;
+		}
+	}
+
 	ret = _regulator_do_set_voltage(rdev, min_uV, max_uV);
 	if (ret < 0)
 		goto out2;
 
+	if (supply_change_uV < 0) {
+		ret = regulator_set_voltage_unlocked(rdev->supply,
+				best_supply_uV, INT_MAX);
+		if (ret)
+			dev_warn(&rdev->dev, "Failed to decrease supply voltage: %d\n",
+					ret);
+		/* No need to fail here */
+		ret = 0;
+	}
+
 out:
-	mutex_unlock(&rdev->mutex);
 	return ret;
 out2:
 	regulator->min_uV = old_min_uV;
 	regulator->max_uV = old_max_uV;
-	mutex_unlock(&rdev->mutex);
+
+	return ret;
+}
+
+/**
+ * regulator_set_voltage - set regulator output voltage
+ * @regulator: regulator source
+ * @min_uV: Minimum required voltage in uV
+ * @max_uV: Maximum acceptable voltage in uV
+ *
+ * Sets a voltage regulator to the desired output voltage. This can be set
+ * during any regulator state. IOW, regulator can be disabled or enabled.
+ *
+ * If the regulator is enabled then the voltage will change to the new value
+ * immediately otherwise if the regulator is disabled the regulator will
+ * output at the new voltage when enabled.
+ *
+ * NOTE: If the regulator is shared between several devices then the lowest
+ * request voltage that meets the system constraints will be used.
+ * Regulator system constraints must be set for this regulator before
+ * calling this function otherwise this call will fail.
+ */
+int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
+{
+	int ret = 0;
+
+	regulator_lock_supply(regulator->rdev);
+
+	ret = regulator_set_voltage_unlocked(regulator, min_uV, max_uV);
+
+	regulator_unlock_supply(regulator->rdev);
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(regulator_set_voltage);
@@ -3001,7 +3110,7 @@ static int _regulator_get_voltage(struct regulator_dev *rdev)
 	} else if (rdev->desc->fixed_uV && (rdev->desc->n_voltages == 1)) {
 		ret = rdev->desc->fixed_uV;
 	} else if (rdev->supply) {
-		ret = regulator_get_voltage(rdev->supply);
+		ret = _regulator_get_voltage(rdev->supply->rdev);
 	} else {
 		return -EINVAL;
 	}
@@ -3024,11 +3133,11 @@ int regulator_get_voltage(struct regulator *regulator)
 {
 	int ret;
 
-	mutex_lock(&regulator->rdev->mutex);
+	regulator_lock_supply(regulator->rdev);
 
 	ret = _regulator_get_voltage(regulator->rdev);
 
-	mutex_unlock(&regulator->rdev->mutex);
+	regulator_unlock_supply(regulator->rdev);
 
 	return ret;
 }

drivers/regulator/tps6105x-regulator.c

@@ -14,7 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/err.h>
-#include <linux/i2c.h>
+#include <linux/regmap.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/mfd/core.h>
@@ -33,7 +33,7 @@ static int tps6105x_regulator_enable(struct regulator_dev *rdev)
 	int ret;
 
 	/* Activate voltage mode */
-	ret = tps6105x_mask_and_set(tps6105x, TPS6105X_REG_0,
+	ret = regmap_update_bits(tps6105x->regmap, TPS6105X_REG_0,
 		TPS6105X_REG0_MODE_MASK,
 		TPS6105X_REG0_MODE_VOLTAGE << TPS6105X_REG0_MODE_SHIFT);
 	if (ret)
@@ -48,7 +48,7 @@ static int tps6105x_regulator_disable(struct regulator_dev *rdev)
 	int ret;
 
 	/* Set into shutdown mode */
-	ret = tps6105x_mask_and_set(tps6105x, TPS6105X_REG_0,
+	ret = regmap_update_bits(tps6105x->regmap, TPS6105X_REG_0,
 		TPS6105X_REG0_MODE_MASK,
 		TPS6105X_REG0_MODE_SHUTDOWN << TPS6105X_REG0_MODE_SHIFT);
 	if (ret)
@@ -60,10 +60,10 @@ static int tps6105x_regulator_disable(struct regulator_dev *rdev)
 static int tps6105x_regulator_is_enabled(struct regulator_dev *rdev)
 {
 	struct tps6105x *tps6105x = rdev_get_drvdata(rdev);
-	u8 regval;
+	unsigned int regval;
 	int ret;
 
-	ret = tps6105x_get(tps6105x, TPS6105X_REG_0, &regval);
+	ret = regmap_read(tps6105x->regmap, TPS6105X_REG_0, &regval);
 	if (ret)
 		return ret;
 	regval &= TPS6105X_REG0_MODE_MASK;
@@ -78,10 +78,10 @@ static int tps6105x_regulator_is_enabled(struct regulator_dev *rdev)
 static int tps6105x_regulator_get_voltage_sel(struct regulator_dev *rdev)
 {
 	struct tps6105x *tps6105x = rdev_get_drvdata(rdev);
-	u8 regval;
+	unsigned int regval;
 	int ret;
 
-	ret = tps6105x_get(tps6105x, TPS6105X_REG_0, &regval);
+	ret = regmap_read(tps6105x->regmap, TPS6105X_REG_0, &regval);
 	if (ret)
 		return ret;
 
@@ -96,7 +96,7 @@ static int tps6105x_regulator_set_voltage_sel(struct regulator_dev *rdev,
 	struct tps6105x *tps6105x = rdev_get_drvdata(rdev);
 	int ret;
 
-	ret = tps6105x_mask_and_set(tps6105x, TPS6105X_REG_0,
+	ret = regmap_update_bits(tps6105x->regmap, TPS6105X_REG_0,
 				    TPS6105X_REG0_VOLTAGE_MASK,
 				    selector << TPS6105X_REG0_VOLTAGE_SHIFT);
 	if (ret)

drivers/regulator/tps65023-regulator.c

@@ -86,6 +86,42 @@
 
 #define TPS65023_MAX_REG_ID		TPS65023_LDO_2
 
+#define TPS65023_REGULATOR_DCDC(_num, _t, _em)			\
+	{							\
+		.name		= "VDCDC"#_num,			\
+		.of_match	= of_match_ptr("VDCDC"#_num),	\
+		.regulators_node = of_match_ptr("regulators"),	\
+		.id		= TPS65023_DCDC_##_num,		\
+		.n_voltages     = ARRAY_SIZE(_t),		\
+		.ops		= &tps65023_dcdc_ops,		\
+		.type		= REGULATOR_VOLTAGE,		\
+		.owner		= THIS_MODULE,			\
+		.volt_table	= _t,				\
+		.vsel_reg	= TPS65023_REG_DEF_CORE,	\
+		.vsel_mask	= ARRAY_SIZE(_t) - 1,		\
+		.enable_mask	= _em,				\
+		.enable_reg	= TPS65023_REG_REG_CTRL,	\
+		.apply_reg	= TPS65023_REG_CON_CTRL2,	\
+		.apply_bit	= TPS65023_REG_CTRL2_GO,	\
+	}							\
+
+#define TPS65023_REGULATOR_LDO(_num, _t, _vm)			\
+	{							\
+		.name		= "LDO"#_num,			\
+		.of_match	= of_match_ptr("LDO"#_num),	\
+		.regulators_node = of_match_ptr("regulators"),	\
+		.id		= TPS65023_LDO_##_num,		\
+		.n_voltages     = ARRAY_SIZE(_t),		\
+		.ops		= &tps65023_ldo_ops,		\
+		.type		= REGULATOR_VOLTAGE,		\
+		.owner		= THIS_MODULE,			\
+		.volt_table	= _t,				\
+		.vsel_reg	= TPS65023_REG_LDO_CTRL,	\
+		.vsel_mask	= _vm,				\
+		.enable_mask	= 1 << (_num),			\
+		.enable_reg	= TPS65023_REG_REG_CTRL,	\
+	}							\
+
 /* Supported voltage values for regulators */
 static const unsigned int VCORE_VSEL_table[] = {
 	800000, 825000, 850000, 875000,
@@ -124,25 +160,16 @@ static const unsigned int TPS65023_LDO2_VSEL_table[] = {
 	2500000, 2800000, 3000000, 3300000,
 };
 
-/* Regulator specific details */
-struct tps_info {
-	const char *name;
-	u8 table_len;
-	const unsigned int *table;
-};
-
 /* PMIC details */
 struct tps_pmic {
-	struct regulator_desc desc[TPS65023_NUM_REGULATOR];
 	struct regulator_dev *rdev[TPS65023_NUM_REGULATOR];
-	const struct tps_info *info[TPS65023_NUM_REGULATOR];
+	const struct tps_driver_data *driver_data;
 	struct regmap *regmap;
-	u8 core_regulator;
 };
 
 /* Struct passed as driver data */
 struct tps_driver_data {
-	const struct tps_info *info;
+	const struct regulator_desc *desc;
 	u8 core_regulator;
 };
 
@@ -154,7 +181,7 @@ static int tps65023_dcdc_get_voltage_sel(struct regulator_dev *dev)
 	if (dcdc < TPS65023_DCDC_1 || dcdc > TPS65023_DCDC_3)
 		return -EINVAL;
 
-	if (dcdc != tps->core_regulator)
+	if (dcdc != tps->driver_data->core_regulator)
 		return 0;
 
 	return regulator_get_voltage_sel_regmap(dev);
@@ -166,7 +193,7 @@ static int tps65023_dcdc_set_voltage_sel(struct regulator_dev *dev,
 	struct tps_pmic *tps = rdev_get_drvdata(dev);
 	int dcdc = rdev_get_id(dev);
 
-	if (dcdc != tps->core_regulator)
+	if (dcdc != tps->driver_data->core_regulator)
 		return -EINVAL;
 
 	return regulator_set_voltage_sel_regmap(dev, selector);
@@ -199,30 +226,60 @@ static const struct regmap_config tps65023_regmap_config = {
 	.val_bits = 8,
 };
 
+static const struct regulator_desc tps65020_regulators[] = {
+	TPS65023_REGULATOR_DCDC(1, DCDC_FIXED_3300000_VSEL_table, 0x20),
+	TPS65023_REGULATOR_DCDC(2, DCDC_FIXED_1800000_VSEL_table, 0x10),
+	TPS65023_REGULATOR_DCDC(3, VCORE_VSEL_table, 0x08),
+	TPS65023_REGULATOR_LDO(1, TPS65020_LDO_VSEL_table, 0x07),
+	TPS65023_REGULATOR_LDO(2, TPS65020_LDO_VSEL_table, 0x70),
+};
+
+static const struct regulator_desc tps65021_regulators[] = {
+	TPS65023_REGULATOR_DCDC(1, DCDC_FIXED_3300000_VSEL_table, 0x20),
+	TPS65023_REGULATOR_DCDC(2, DCDC_FIXED_1800000_VSEL_table, 0x10),
+	TPS65023_REGULATOR_DCDC(3, VCORE_VSEL_table, 0x08),
+	TPS65023_REGULATOR_LDO(1, TPS65023_LDO1_VSEL_table, 0x07),
+	TPS65023_REGULATOR_LDO(2, TPS65023_LDO2_VSEL_table, 0x70),
+};
+
+static const struct regulator_desc tps65023_regulators[] = {
+	TPS65023_REGULATOR_DCDC(1, VCORE_VSEL_table, 0x20),
+	TPS65023_REGULATOR_DCDC(2, DCDC_FIXED_3300000_VSEL_table, 0x10),
+	TPS65023_REGULATOR_DCDC(3, DCDC_FIXED_1800000_VSEL_table, 0x08),
+	TPS65023_REGULATOR_LDO(1, TPS65023_LDO1_VSEL_table, 0x07),
+	TPS65023_REGULATOR_LDO(2, TPS65023_LDO2_VSEL_table, 0x70),
+};
+
+static struct tps_driver_data tps65020_drv_data = {
+	.desc = tps65020_regulators,
+	.core_regulator = TPS65023_DCDC_3,
+};
+
+static struct tps_driver_data tps65021_drv_data = {
+	.desc = tps65021_regulators,
+	.core_regulator = TPS65023_DCDC_3,
+};
+
+static struct tps_driver_data tps65023_drv_data = {
+	.desc = tps65023_regulators,
+	.core_regulator = TPS65023_DCDC_1,
+};
+
 static int tps_65023_probe(struct i2c_client *client,
 				     const struct i2c_device_id *id)
 {
-	const struct tps_driver_data *drv_data = (void *)id->driver_data;
+	struct regulator_init_data *init_data = dev_get_platdata(&client->dev);
-	const struct tps_info *info = drv_data->info;
 	struct regulator_config config = { };
-	struct regulator_init_data *init_data;
-	struct regulator_dev *rdev;
 	struct tps_pmic *tps;
 	int i;
 	int error;
 
-	/**
-	 * init_data points to array of regulator_init structures
-	 * coming from the board-evm file.
-	 */
-	init_data = dev_get_platdata(&client->dev);
-	if (!init_data)
-		return -EIO;
-
 	tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
 	if (!tps)
 		return -ENOMEM;
 
+	tps->driver_data = (struct tps_driver_data *)id->driver_data;
+
 	tps->regmap = devm_regmap_init_i2c(client, &tps65023_regmap_config);
 	if (IS_ERR(tps->regmap)) {
 		error = PTR_ERR(tps->regmap);
@@ -232,58 +289,22 @@ static int tps_65023_probe(struct i2c_client *client,
 	}
 
 	/* common for all regulators */
-	tps->core_regulator = drv_data->core_regulator;
+	config.dev = &client->dev;
+	config.driver_data = tps;
+	config.regmap = tps->regmap;
 
-	for (i = 0; i < TPS65023_NUM_REGULATOR; i++, info++, init_data++) {
+	for (i = 0; i < TPS65023_NUM_REGULATOR; i++) {
-		/* Store regulator specific information */
+		if (init_data)
-		tps->info[i] = info;
+			config.init_data = &init_data[i];
-
-		tps->desc[i].name = info->name;
-		tps->desc[i].id = i;
-		tps->desc[i].n_voltages = info->table_len;
-		tps->desc[i].volt_table = info->table;
-		tps->desc[i].ops = (i > TPS65023_DCDC_3 ?
-					&tps65023_ldo_ops : &tps65023_dcdc_ops);
-		tps->desc[i].type = REGULATOR_VOLTAGE;
-		tps->desc[i].owner = THIS_MODULE;
-
-		tps->desc[i].enable_reg = TPS65023_REG_REG_CTRL;
-		switch (i) {
-		case TPS65023_LDO_1:
-			tps->desc[i].vsel_reg = TPS65023_REG_LDO_CTRL;
-			tps->desc[i].vsel_mask = 0x07;
-			tps->desc[i].enable_mask = 1 << 1;
-			break;
-		case TPS65023_LDO_2:
-			tps->desc[i].vsel_reg = TPS65023_REG_LDO_CTRL;
-			tps->desc[i].vsel_mask = 0x70;
-			tps->desc[i].enable_mask = 1 << 2;
-			break;
-		default: /* DCDCx */
-			tps->desc[i].enable_mask =
-					1 << (TPS65023_NUM_REGULATOR - i);
-			tps->desc[i].vsel_reg = TPS65023_REG_DEF_CORE;
-			tps->desc[i].vsel_mask = info->table_len - 1;
-			tps->desc[i].apply_reg = TPS65023_REG_CON_CTRL2;
-			tps->desc[i].apply_bit = TPS65023_REG_CTRL2_GO;
-		}
-
-		config.dev = &client->dev;
-		config.init_data = init_data;
-		config.driver_data = tps;
-		config.regmap = tps->regmap;
 
 		/* Register the regulators */
-		rdev = devm_regulator_register(&client->dev, &tps->desc[i],
+		tps->rdev[i] = devm_regulator_register(&client->dev,
-					       &config);
+					&tps->driver_data->desc[i], &config);
-		if (IS_ERR(rdev)) {
+		if (IS_ERR(tps->rdev[i])) {
 			dev_err(&client->dev, "failed to register %s\n",
 				id->name);
-			return PTR_ERR(rdev);
+			return PTR_ERR(tps->rdev[i]);
 		}
-
-		/* Save regulator for cleanup */
-		tps->rdev[i] = rdev;
 	}
 
 	i2c_set_clientdata(client, tps);
@@ -296,120 +317,33 @@ static int tps_65023_probe(struct i2c_client *client,
 	return 0;
 }
 
-static const struct tps_info tps65020_regs[] = {
+static const struct of_device_id tps65023_of_match[] = {
-	{
+	{ .compatible = "ti,tps65020", .data = &tps65020_drv_data},
-		.name = "VDCDC1",
+	{ .compatible = "ti,tps65021", .data = &tps65021_drv_data},
-		.table_len = ARRAY_SIZE(DCDC_FIXED_3300000_VSEL_table),
+	{ .compatible = "ti,tps65023", .data = &tps65023_drv_data},
-		.table = DCDC_FIXED_3300000_VSEL_table,
+	{},
-	},
-	{
-		.name = "VDCDC2",
-		.table_len = ARRAY_SIZE(DCDC_FIXED_1800000_VSEL_table),
-		.table = DCDC_FIXED_1800000_VSEL_table,
-	},
-	{
-		.name = "VDCDC3",
-		.table_len = ARRAY_SIZE(VCORE_VSEL_table),
-		.table = VCORE_VSEL_table,
-	},
-	{
-		.name = "LDO1",
-		.table_len = ARRAY_SIZE(TPS65020_LDO_VSEL_table),
-		.table = TPS65020_LDO_VSEL_table,
-	},
-	{
-		.name = "LDO2",
-		.table_len = ARRAY_SIZE(TPS65020_LDO_VSEL_table),
-		.table = TPS65020_LDO_VSEL_table,
-	},
-};
-
-static const struct tps_info tps65021_regs[] = {
-	{
-		.name = "VDCDC1",
-		.table_len = ARRAY_SIZE(DCDC_FIXED_3300000_VSEL_table),
-		.table = DCDC_FIXED_3300000_VSEL_table,
-	},
-	{
-		.name = "VDCDC2",
-		.table_len = ARRAY_SIZE(DCDC_FIXED_1800000_VSEL_table),
-		.table = DCDC_FIXED_1800000_VSEL_table,
-	},
-	{
-		.name = "VDCDC3",
-		.table_len = ARRAY_SIZE(VCORE_VSEL_table),
-		.table = VCORE_VSEL_table,
-	},
-	{
-		.name = "LDO1",
-		.table_len = ARRAY_SIZE(TPS65023_LDO1_VSEL_table),
-		.table = TPS65023_LDO1_VSEL_table,
-	},
-	{
-		.name = "LDO2",
-		.table_len = ARRAY_SIZE(TPS65023_LDO2_VSEL_table),
-		.table = TPS65023_LDO2_VSEL_table,
-	},
-};
-
-static const struct tps_info tps65023_regs[] = {
-	{
-		.name = "VDCDC1",
-		.table_len = ARRAY_SIZE(VCORE_VSEL_table),
-		.table = VCORE_VSEL_table,
-	},
-	{
-		.name = "VDCDC2",
-		.table_len = ARRAY_SIZE(DCDC_FIXED_3300000_VSEL_table),
-		.table = DCDC_FIXED_3300000_VSEL_table,
-	},
-	{
-		.name = "VDCDC3",
-		.table_len = ARRAY_SIZE(DCDC_FIXED_1800000_VSEL_table),
-		.table = DCDC_FIXED_1800000_VSEL_table,
-	},
-	{
-		.name = "LDO1",
-		.table_len = ARRAY_SIZE(TPS65023_LDO1_VSEL_table),
-		.table = TPS65023_LDO1_VSEL_table,
-	},
-	{
-		.name = "LDO2",
-		.table_len = ARRAY_SIZE(TPS65023_LDO2_VSEL_table),
-		.table = TPS65023_LDO2_VSEL_table,
-	},
-};
-
-static struct tps_driver_data tps65020_drv_data = {
-	.info = tps65020_regs,
-	.core_regulator = TPS65023_DCDC_3,
-};
-
-static struct tps_driver_data tps65021_drv_data = {
-	.info = tps65021_regs,
-	.core_regulator = TPS65023_DCDC_3,
-};
-
-static struct tps_driver_data tps65023_drv_data = {
-	.info = tps65023_regs,
-	.core_regulator = TPS65023_DCDC_1,
 };
+MODULE_DEVICE_TABLE(of, tps65023_of_match);
 
 static const struct i2c_device_id tps_65023_id[] = {
-	{.name = "tps65023",
+	{
-	.driver_data = (unsigned long) &tps65023_drv_data},
+		.name = "tps65023",
-	{.name = "tps65021",
+		.driver_data = (kernel_ulong_t)&tps65023_drv_data
-	.driver_data = (unsigned long) &tps65021_drv_data,},
+	}, {
-	{.name = "tps65020",
+		.name = "tps65021",
-	.driver_data = (unsigned long) &tps65020_drv_data},
+		.driver_data = (kernel_ulong_t)&tps65021_drv_data
+	}, {
+		.name = "tps65020",
+		.driver_data = (kernel_ulong_t)&tps65020_drv_data
+	},
 	{ },
 };
-
 MODULE_DEVICE_TABLE(i2c, tps_65023_id);
 
 static struct i2c_driver tps_65023_i2c_driver = {
 	.driver = {
 		.name = "tps65023",
+		.of_match_table = of_match_ptr(tps65023_of_match),
 	},
 	.probe = tps_65023_probe,
 	.id_table = tps_65023_id,

include/linux/mfd/tps6105x.h

@@ -10,6 +10,7 @@
 #define MFD_TPS6105X_H
 
 #include <linux/i2c.h>
+#include <linux/regmap.h>
 #include <linux/regulator/machine.h>
 
 /*
@@ -82,20 +83,15 @@ struct tps6105x_platform_data {
 
 /**
  * struct tps6105x - state holder for the TPS6105x drivers
- * @mutex: mutex to serialize I2C accesses
  * @i2c_client: corresponding I2C client
  * @regulator: regulator device if used in voltage mode
+ * @regmap: used for i2c communcation on accessing registers
  */
 struct tps6105x {
 	struct tps6105x_platform_data *pdata;
-	struct mutex		lock;
 	struct i2c_client	*client;
 	struct regulator_dev	*regulator;
+	struct regmap		*regmap;
 };
 
-extern int tps6105x_set(struct tps6105x *tps6105x, u8 reg, u8 value);
-extern int tps6105x_get(struct tps6105x *tps6105x, u8 reg, u8 *buf);
-extern int tps6105x_mask_and_set(struct tps6105x *tps6105x, u8 reg,
-				 u8 bitmask, u8 bitvalues);
-
 #endif