UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

RDMA/devices: Do not deadlock during client removal 

lockdep reports:

   WARNING: possible circular locking dependency detected

   modprobe/302 is trying to acquire lock:
   0000000007c8919c ((wq_completion)ib_cm){+.+.}, at: flush_workqueue+0xdf/0x990

   but task is already holding lock:
   000000002d3d2ca9 (&device->client_data_rwsem){++++}, at: remove_client_context+0x79/0xd0 [ib_core]

   which lock already depends on the new lock.

   the existing dependency chain (in reverse order) is:

   -> #2 (&device->client_data_rwsem){++++}:
          down_read+0x3f/0x160
          ib_get_net_dev_by_params+0xd5/0x200 [ib_core]
          cma_ib_req_handler+0x5f6/0x2090 [rdma_cm]
          cm_process_work+0x29/0x110 [ib_cm]
          cm_req_handler+0x10f5/0x1c00 [ib_cm]
          cm_work_handler+0x54c/0x311d [ib_cm]
          process_one_work+0x4aa/0xa30
          worker_thread+0x62/0x5b0
          kthread+0x1ca/0x1f0
          ret_from_fork+0x24/0x30

   -> #1 ((work_completion)(&(&work->work)->work)){+.+.}:
          process_one_work+0x45f/0xa30
          worker_thread+0x62/0x5b0
          kthread+0x1ca/0x1f0
          ret_from_fork+0x24/0x30

   -> #0 ((wq_completion)ib_cm){+.+.}:
          lock_acquire+0xc8/0x1d0
          flush_workqueue+0x102/0x990
          cm_remove_one+0x30e/0x3c0 [ib_cm]
          remove_client_context+0x94/0xd0 [ib_core]
          disable_device+0x10a/0x1f0 [ib_core]
          __ib_unregister_device+0x5a/0xe0 [ib_core]
          ib_unregister_device+0x21/0x30 [ib_core]
          mlx5_ib_stage_ib_reg_cleanup+0x9/0x10 [mlx5_ib]
          __mlx5_ib_remove+0x3d/0x70 [mlx5_ib]
          mlx5_ib_remove+0x12e/0x140 [mlx5_ib]
          mlx5_remove_device+0x144/0x150 [mlx5_core]
          mlx5_unregister_interface+0x3f/0xf0 [mlx5_core]
          mlx5_ib_cleanup+0x10/0x3a [mlx5_ib]
          __x64_sys_delete_module+0x227/0x350
          do_syscall_64+0xc3/0x6a4
          entry_SYSCALL_64_after_hwframe+0x49/0xbe

Which is due to the read side of the client_data_rwsem being obtained
recursively through a work queue flush during cm client removal.

The lock is being held across the remove in remove_client_context() so
that the function is a fence, once it returns the client is removed. This
is required so that the two callers do not proceed with destruction until
the client completes removal.

Instead of using client_data_rwsem use the existing device unregistration
refcount and add a similar client unregistration (client->uses) refcount.

This will fence the two unregistration paths without holding any locks.

Cc: <stable@vger.kernel.org>
Fixes: 921eab1143 ("RDMA/devices: Re-organize device.c locking")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190731081841.32345-2-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
This commit is contained in:
Jason Gunthorpe 2019-07-31 11:18:40 +03:00 committed by Doug Ledford
parent 61f259821d
commit 621e55ff5b
2 changed files with 45 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

56
drivers/infiniband/core/device.c
View File

@ -99,6 +99,12 @@ static LIST_HEAD(client_list);
static DEFINE_XARRAY_FLAGS(clients, XA_FLAGS_ALLOC);
static DECLARE_RWSEM(clients_rwsem);
static void ib_client_put(struct ib_client *client)
{
if (refcount_dec_and_test(&client->uses))
complete(&client->uses_zero);
}
/*
* If client_data is registered then the corresponding client must also still
* be registered.
@ -660,6 +666,14 @@ static int add_client_context(struct ib_device *device,
return 0;
down_write(&device->client_data_rwsem);
/*
* So long as the client is registered hold both the client and device
* unregistration locks.
*/
if (!refcount_inc_not_zero(&client->uses))
goto out_unlock;
refcount_inc(&device->refcount);
/*
* Another caller to add_client_context got here first and has already
* completely initialized context.
@ -683,6 +697,9 @@ static int add_client_context(struct ib_device *device,
return 0;
out:
ib_device_put(device);
ib_client_put(client);
out_unlock:
up_write(&device->client_data_rwsem);
return ret;
}
@ -702,7 +719,7 @@ static void remove_client_context(struct ib_device *device,
client_data = xa_load(&device->client_data, client_id);
xa_clear_mark(&device->client_data, client_id, CLIENT_DATA_REGISTERED);
client = xa_load(&clients, client_id);
downgrade_write(&device->client_data_rwsem);
up_write(&device->client_data_rwsem);
/*
* Notice we cannot be holding any exclusive locks when calling the
@ -712,17 +729,13 @@ static void remove_client_context(struct ib_device *device,
*
* For this reason clients and drivers should not call the
* unregistration functions will holdling any locks.
*
* It tempting to drop the client_data_rwsem too, but this is required
* to ensure that unregister_client does not return until all clients
* are completely unregistered, which is required to avoid module
* unloading races.
*/
if (client->remove)
client->remove(device, client_data);
xa_erase(&device->client_data, client_id);
up_read(&device->client_data_rwsem);
ib_device_put(device);
ib_client_put(client);
}
static int alloc_port_data(struct ib_device *device)
@ -1705,6 +1718,8 @@ int ib_register_client(struct ib_client *client)
unsigned long index;
int ret;
refcount_set(&client->uses, 1);
init_completion(&client->uses_zero);
ret = assign_client_id(client);
if (ret)
return ret;
@ -1740,16 +1755,29 @@ void ib_unregister_client(struct ib_client *client)
unsigned long index;
down_write(&clients_rwsem);
ib_client_put(client);
xa_clear_mark(&clients, client->client_id, CLIENT_REGISTERED);
up_write(&clients_rwsem);
/*
* Every device still known must be serialized to make sure we are
* done with the client callbacks before we return.
*/
down_read(&devices_rwsem);
xa_for_each (&devices, index, device)
/* We do not want to have locks while calling client->remove() */
rcu_read_lock();
xa_for_each (&devices, index, device) {
if (!ib_device_try_get(device))
continue;
rcu_read_unlock();
remove_client_context(device, client->client_id);
up_read(&devices_rwsem);
ib_device_put(device);
rcu_read_lock();
}
rcu_read_unlock();
/*
* remove_client_context() is not a fence, it can return even though a
* removal is ongoing. Wait until all removals are completed.
*/
wait_for_completion(&client->uses_zero);
down_write(&clients_rwsem);
list_del(&client->list);

3
include/rdma/ib_verbs.h
View File

@ -2647,6 +2647,9 @@ struct ib_client {
const union ib_gid *gid,
const struct sockaddr *addr,
void *client_data);
refcount_t uses;
struct completion uses_zero;
struct list_head list;
u32 client_id;