From 6119dda34e5d0821959e37641b287576826b6378 Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Thu, 25 Jun 2020 17:42:09 +0200 Subject: [PATCH] net: phy: mscc: restore the base page in vsc8514/8584_config_init In the vsc8584_config_init and vsc8514_config_init, the base page is set to 'GPIO', configuration is done, and the page is never explicitly restored to the standard page. No bug was triggered as it turns out helpers called in those config_init functions do modify the base page, and set it back to standard. But that is dangerous and any modification to those functions would introduce bugs. This patch fixes this, to improve maintenance, by restoring the base page to 'standard' once 'GPIO' accesses are completed. Signed-off-by: Antoine Tenart Signed-off-by: David S. Miller --- drivers/net/phy/mscc/mscc_main.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/net/phy/mscc/mscc_main.c b/drivers/net/phy/mscc/mscc_main.c index 03680933f530..f625109df00a 100644 --- a/drivers/net/phy/mscc/mscc_main.c +++ b/drivers/net/phy/mscc/mscc_main.c @@ -1395,6 +1395,11 @@ static int vsc8584_config_init(struct phy_device *phydev) if (ret) goto err; + ret = phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, + MSCC_PHY_PAGE_STANDARD); + if (ret) + goto err; + if (!phy_interface_is_rgmii(phydev)) { val = PROC_CMD_MCB_ACCESS_MAC_CONF | PROC_CMD_RST_CONF_PORT | PROC_CMD_READ_MOD_WRITE_PORT; @@ -1779,7 +1784,11 @@ static int vsc8514_config_init(struct phy_device *phydev) val &= ~MAC_CFG_MASK; val |= MAC_CFG_QSGMII; ret = phy_base_write(phydev, MSCC_PHY_MAC_CFG_FASTLINK, val); + if (ret) + goto err; + ret = phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, + MSCC_PHY_PAGE_STANDARD); if (ret) goto err;