diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig index 53827778b414..6620d96ee44d 100644 --- a/drivers/staging/media/Kconfig +++ b/drivers/staging/media/Kconfig @@ -36,4 +36,6 @@ source "drivers/staging/media/s5p-cec/Kconfig" # Keep LIRC at the end, as it has sub-menus source "drivers/staging/media/lirc/Kconfig" +source "drivers/staging/media/st-cec/Kconfig" + endif diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile index 6316e8c7a497..906257e94dda 100644 --- a/drivers/staging/media/Makefile +++ b/drivers/staging/media/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_LIRC_STAGING) += lirc/ obj-$(CONFIG_VIDEO_DM365_VPFE) += davinci_vpfe/ obj-$(CONFIG_VIDEO_OMAP4) += omap4iss/ obj-$(CONFIG_USB_PULSE8_CEC) += pulse8-cec/ +obj-$(CONFIG_VIDEO_STI_HDMI_CEC) += st-cec/ diff --git a/drivers/staging/media/st-cec/Kconfig b/drivers/staging/media/st-cec/Kconfig new file mode 100644 index 000000000000..784d2c600aca --- /dev/null +++ b/drivers/staging/media/st-cec/Kconfig @@ -0,0 +1,8 @@ +config VIDEO_STI_HDMI_CEC + tristate "STMicroelectronics STiH4xx HDMI CEC driver" + depends on VIDEO_DEV && MEDIA_CEC && (ARCH_STI || COMPILE_TEST) + ---help--- + This is a driver for STIH4xx HDMI CEC interface. It uses the + generic CEC framework interface. + CEC bus is present in the HDMI connector and enables communication + between compatible devices. diff --git a/drivers/staging/media/st-cec/Makefile b/drivers/staging/media/st-cec/Makefile new file mode 100644 index 000000000000..f07905e1448a --- /dev/null +++ b/drivers/staging/media/st-cec/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_VIDEO_STI_HDMI_CEC) += stih-cec.o diff --git a/drivers/staging/media/st-cec/stih-cec.c b/drivers/staging/media/st-cec/stih-cec.c new file mode 100644 index 000000000000..214344866a6b --- /dev/null +++ b/drivers/staging/media/st-cec/stih-cec.c @@ -0,0 +1,380 @@ +/* + * drivers/staging/media/st-cec/stih-cec.c + * + * STIH4xx CEC driver + * Copyright (C) STMicroelectronic SA 2016 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define CEC_NAME "stih-cec" + +/* CEC registers */ +#define CEC_CLK_DIV 0x0 +#define CEC_CTRL 0x4 +#define CEC_IRQ_CTRL 0x8 +#define CEC_STATUS 0xC +#define CEC_EXT_STATUS 0x10 +#define CEC_TX_CTRL 0x14 +#define CEC_FREE_TIME_THRESH 0x18 +#define CEC_BIT_TOUT_THRESH 0x1C +#define CEC_BIT_PULSE_THRESH 0x20 +#define CEC_DATA 0x24 +#define CEC_TX_ARRAY_CTRL 0x28 +#define CEC_CTRL2 0x2C +#define CEC_TX_ERROR_STS 0x30 +#define CEC_ADDR_TABLE 0x34 +#define CEC_DATA_ARRAY_CTRL 0x38 +#define CEC_DATA_ARRAY_STATUS 0x3C +#define CEC_TX_DATA_BASE 0x40 +#define CEC_TX_DATA_TOP 0x50 +#define CEC_TX_DATA_SIZE 0x1 +#define CEC_RX_DATA_BASE 0x54 +#define CEC_RX_DATA_TOP 0x64 +#define CEC_RX_DATA_SIZE 0x1 + +/* CEC_CTRL2 */ +#define CEC_LINE_INACTIVE_EN BIT(0) +#define CEC_AUTO_BUS_ERR_EN BIT(1) +#define CEC_STOP_ON_ARB_ERR_EN BIT(2) +#define CEC_TX_REQ_WAIT_EN BIT(3) + +/* CEC_DATA_ARRAY_CTRL */ +#define CEC_TX_ARRAY_EN BIT(0) +#define CEC_RX_ARRAY_EN BIT(1) +#define CEC_TX_ARRAY_RESET BIT(2) +#define CEC_RX_ARRAY_RESET BIT(3) +#define CEC_TX_N_OF_BYTES_IRQ_EN BIT(4) +#define CEC_TX_STOP_ON_NACK BIT(7) + +/* CEC_TX_ARRAY_CTRL */ +#define CEC_TX_N_OF_BYTES 0x1F +#define CEC_TX_START BIT(5) +#define CEC_TX_AUTO_SOM_EN BIT(6) +#define CEC_TX_AUTO_EOM_EN BIT(7) + +/* CEC_IRQ_CTRL */ +#define CEC_TX_DONE_IRQ_EN BIT(0) +#define CEC_ERROR_IRQ_EN BIT(2) +#define CEC_RX_DONE_IRQ_EN BIT(3) +#define CEC_RX_SOM_IRQ_EN BIT(4) +#define CEC_RX_EOM_IRQ_EN BIT(5) +#define CEC_FREE_TIME_IRQ_EN BIT(6) +#define CEC_PIN_STS_IRQ_EN BIT(7) + +/* CEC_CTRL */ +#define CEC_IN_FILTER_EN BIT(0) +#define CEC_PWR_SAVE_EN BIT(1) +#define CEC_EN BIT(4) +#define CEC_ACK_CTRL BIT(5) +#define CEC_RX_RESET_EN BIT(6) +#define CEC_IGNORE_RX_ERROR BIT(7) + +/* CEC_STATUS */ +#define CEC_TX_DONE_STS BIT(0) +#define CEC_TX_ACK_GET_STS BIT(1) +#define CEC_ERROR_STS BIT(2) +#define CEC_RX_DONE_STS BIT(3) +#define CEC_RX_SOM_STS BIT(4) +#define CEC_RX_EOM_STS BIT(5) +#define CEC_FREE_TIME_IRQ_STS BIT(6) +#define CEC_PIN_STS BIT(7) +#define CEC_SBIT_TOUT_STS BIT(8) +#define CEC_DBIT_TOUT_STS BIT(9) +#define CEC_LPULSE_ERROR_STS BIT(10) +#define CEC_HPULSE_ERROR_STS BIT(11) +#define CEC_TX_ERROR BIT(12) +#define CEC_TX_ARB_ERROR BIT(13) +#define CEC_RX_ERROR_MIN BIT(14) +#define CEC_RX_ERROR_MAX BIT(15) + +/* Signal free time in bit periods (2.4ms) */ +#define CEC_PRESENT_INIT_SFT 7 +#define CEC_NEW_INIT_SFT 5 +#define CEC_RETRANSMIT_SFT 3 + +/* Constants for CEC_BIT_TOUT_THRESH register */ +#define CEC_SBIT_TOUT_47MS BIT(1) +#define CEC_SBIT_TOUT_48MS BIT(0) | BIT(1) +#define CEC_SBIT_TOUT_50MS BIT(2) +#define CEC_DBIT_TOUT_27MS BIT(0) +#define CEC_DBIT_TOUT_28MS BIT(1) +#define CEC_DBIT_TOUT_29MS BIT(0) | BIT(1) + +/* Constants for CEC_BIT_PULSE_THRESH register */ +#define CEC_BIT_LPULSE_03MS BIT(1) +#define CEC_BIT_HPULSE_03MS BIT(3) + +/* Constants for CEC_DATA_ARRAY_STATUS register */ +#define CEC_RX_N_OF_BYTES 0x1F +#define CEC_TX_N_OF_BYTES_SENT BIT(5) +#define CEC_RX_OVERRUN BIT(6) + +struct stih_cec { + struct cec_adapter *adap; + struct device *dev; + struct clk *clk; + void __iomem *regs; + int irq; + u32 irq_status; +}; + +static int stih_cec_adap_enable(struct cec_adapter *adap, bool enable) +{ + struct stih_cec *cec = adap->priv; + + if (enable) { + /* The doc says (input TCLK_PERIOD * CEC_CLK_DIV) = 0.1ms */ + unsigned long clk_freq = clk_get_rate(cec->clk); + u32 cec_clk_div = clk_freq / 10000; + + writel(cec_clk_div, cec->regs + CEC_CLK_DIV); + + /* Configuration of the durations activating a timeout */ + writel(CEC_SBIT_TOUT_47MS | (CEC_DBIT_TOUT_28MS << 4), + cec->regs + CEC_BIT_TOUT_THRESH); + + /* Configuration of the smallest allowed duration for pulses */ + writel(CEC_BIT_LPULSE_03MS | CEC_BIT_HPULSE_03MS, + cec->regs + CEC_BIT_PULSE_THRESH); + + /* Minimum received bit period threshold */ + writel(BIT(5) | BIT(7), cec->regs + CEC_TX_CTRL); + + /* Configuration of transceiver data arrays */ + writel(CEC_TX_ARRAY_EN | CEC_RX_ARRAY_EN | CEC_TX_STOP_ON_NACK, + cec->regs + CEC_DATA_ARRAY_CTRL); + + /* Configuration of the control bits for CEC Transceiver */ + writel(CEC_IN_FILTER_EN | CEC_EN | CEC_RX_RESET_EN, + cec->regs + CEC_CTRL); + + /* Clear logical addresses */ + writel(0, cec->regs + CEC_ADDR_TABLE); + + /* Clear the status register */ + writel(0x0, cec->regs + CEC_STATUS); + + /* Enable the interrupts */ + writel(CEC_TX_DONE_IRQ_EN | CEC_RX_DONE_IRQ_EN | + CEC_RX_SOM_IRQ_EN | CEC_RX_EOM_IRQ_EN | + CEC_ERROR_IRQ_EN, + cec->regs + CEC_IRQ_CTRL); + + } else { + /* Clear logical addresses */ + writel(0, cec->regs + CEC_ADDR_TABLE); + + /* Clear the status register */ + writel(0x0, cec->regs + CEC_STATUS); + + /* Disable the interrupts */ + writel(0, cec->regs + CEC_IRQ_CTRL); + } + + return 0; +} + +static int stih_cec_adap_log_addr(struct cec_adapter *adap, u8 logical_addr) +{ + struct stih_cec *cec = adap->priv; + u32 reg = readl(cec->regs + CEC_ADDR_TABLE); + + reg |= 1 << logical_addr; + + if (logical_addr == CEC_LOG_ADDR_INVALID) + reg = 0; + + writel(reg, cec->regs + CEC_ADDR_TABLE); + + return 0; +} + +static int stih_cec_adap_transmit(struct cec_adapter *adap, u8 attempts, + u32 signal_free_time, struct cec_msg *msg) +{ + struct stih_cec *cec = adap->priv; + int i; + + /* Copy message into registers */ + for (i = 0; i < msg->len; i++) + writeb(msg->msg[i], cec->regs + CEC_TX_DATA_BASE + i); + + /* Start transmission, configure hardware to add start and stop bits + * Signal free time is handled by the hardware + */ + writel(CEC_TX_AUTO_SOM_EN | CEC_TX_AUTO_EOM_EN | CEC_TX_START | + msg->len, cec->regs + CEC_TX_ARRAY_CTRL); + + return 0; +} + +static void stih_tx_done(struct stih_cec *cec, u32 status) +{ + if (status & CEC_TX_ERROR) { + cec_transmit_done(cec->adap, CEC_TX_STATUS_ERROR, 0, 0, 0, 1); + return; + } + + if (status & CEC_TX_ARB_ERROR) { + cec_transmit_done(cec->adap, + CEC_TX_STATUS_ARB_LOST, 1, 0, 0, 0); + return; + } + + if (!(status & CEC_TX_ACK_GET_STS)) { + cec_transmit_done(cec->adap, CEC_TX_STATUS_NACK, 0, 1, 0, 0); + return; + } + + cec_transmit_done(cec->adap, CEC_TX_STATUS_OK, 0, 0, 0, 0); +} + +static void stih_rx_done(struct stih_cec *cec, u32 status) +{ + struct cec_msg msg = {}; + u8 i; + + if (status & CEC_RX_ERROR_MIN) + return; + + if (status & CEC_RX_ERROR_MAX) + return; + + msg.len = readl(cec->regs + CEC_DATA_ARRAY_STATUS) & 0x1f; + + if (!msg.len) + return; + + if (msg.len > 16) + msg.len = 16; + + for (i = 0; i < msg.len; i++) + msg.msg[i] = readl(cec->regs + CEC_RX_DATA_BASE + i); + + cec_received_msg(cec->adap, &msg); +} + +static irqreturn_t stih_cec_irq_handler_thread(int irq, void *priv) +{ + struct stih_cec *cec = priv; + + if (cec->irq_status & CEC_TX_DONE_STS) + stih_tx_done(cec, cec->irq_status); + + if (cec->irq_status & CEC_RX_DONE_STS) + stih_rx_done(cec, cec->irq_status); + + cec->irq_status = 0; + + return IRQ_HANDLED; +} + +static irqreturn_t stih_cec_irq_handler(int irq, void *priv) +{ + struct stih_cec *cec = priv; + + cec->irq_status = readl(cec->regs + CEC_STATUS); + writel(cec->irq_status, cec->regs + CEC_STATUS); + + return IRQ_WAKE_THREAD; +} + +static const struct cec_adap_ops sti_cec_adap_ops = { + .adap_enable = stih_cec_adap_enable, + .adap_log_addr = stih_cec_adap_log_addr, + .adap_transmit = stih_cec_adap_transmit, +}; + +static int stih_cec_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *res; + struct stih_cec *cec; + int ret; + + cec = devm_kzalloc(dev, sizeof(*cec), GFP_KERNEL); + if (!cec) + return -ENOMEM; + + cec->dev = dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + cec->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(cec->regs)) + return PTR_ERR(cec->regs); + + cec->irq = platform_get_irq(pdev, 0); + if (cec->irq < 0) + return cec->irq; + + ret = devm_request_threaded_irq(dev, cec->irq, stih_cec_irq_handler, + stih_cec_irq_handler_thread, 0, + pdev->name, cec); + if (ret) + return ret; + + cec->clk = devm_clk_get(dev, "cec-clk"); + if (IS_ERR(cec->clk)) { + dev_err(dev, "Cannot get cec clock\n"); + return PTR_ERR(cec->clk); + } + + cec->adap = cec_allocate_adapter(&sti_cec_adap_ops, cec, + CEC_NAME, + CEC_CAP_LOG_ADDRS | CEC_CAP_PASSTHROUGH | + CEC_CAP_PHYS_ADDR | CEC_CAP_TRANSMIT, + 1, &pdev->dev); + ret = PTR_ERR_OR_ZERO(cec->adap); + if (ret) + return ret; + + ret = cec_register_adapter(cec->adap); + if (ret) { + cec_delete_adapter(cec->adap); + return ret; + } + + platform_set_drvdata(pdev, cec); + return 0; +} + +static int stih_cec_remove(struct platform_device *pdev) +{ + return 0; +} + +static const struct of_device_id stih_cec_match[] = { + { + .compatible = "st,stih-cec", + }, + {}, +}; + +static struct platform_driver stih_cec_pdrv = { + .probe = stih_cec_probe, + .remove = stih_cec_remove, + .driver = { + .name = CEC_NAME, + .of_match_table = stih_cec_match, + }, +}; + +module_platform_driver(stih_cec_pdrv); + +MODULE_AUTHOR("Benjamin Gaignard "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("STIH4xx CEC driver");