usb: gadget: uvc: Add fix for UVC compliance test suite assertion 6.3.90 failure

As per UVC compliance test specification's assertion number 6.3.90
related to 'Standard VS Isochronous Video Data Endpoint Descriptor Assertions',
the bits D3..2 of 'bmAttributes' field of Standard VS Isochronous Video Data
Endpoint Descriptor should be 01 (binary) to indicate that the
synchronization type is ASYNCHRONOUS.

This mandatory requirement has been captured in section 3.10.1.1 of the UVC
Video Class Specification version 1.1

This patch adds a fix for the same.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Bhupesh Sharma <bhupesh.sharma@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This commit is contained in:
Bhupesh Sharma 2013-03-01 20:46:28 +01:00 committed by Felipe Balbi
parent 0485ec0d3b
commit 609a0532a4
1 changed files with 6 additions and 3 deletions

View File

@ -153,7 +153,8 @@ static struct usb_endpoint_descriptor uvc_fs_streaming_ep __initdata = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_ISOC,
.bmAttributes = USB_ENDPOINT_SYNC_ASYNC
| USB_ENDPOINT_XFER_ISOC,
/* The wMaxPacketSize and bInterval values will be initialized from
* module parameters.
*/
@ -165,7 +166,8 @@ static struct usb_endpoint_descriptor uvc_hs_streaming_ep __initdata = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_ISOC,
.bmAttributes = USB_ENDPOINT_SYNC_ASYNC
| USB_ENDPOINT_XFER_ISOC,
/* The wMaxPacketSize and bInterval values will be initialized from
* module parameters.
*/
@ -178,7 +180,8 @@ static struct usb_endpoint_descriptor uvc_ss_streaming_ep __initdata = {
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_ISOC,
.bmAttributes = USB_ENDPOINT_SYNC_ASYNC
| USB_ENDPOINT_XFER_ISOC,
/* The wMaxPacketSize and bInterval values will be initialized from
* module parameters.
*/