drm/amd/powerplay: Add thermal protection support for Fiji.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
This commit is contained in:
Eric Huang
Alex Deucher
parent
ea617bc9f9
commit
601038142f
|
|
@ -8,7 +8,7 @@ HARDWARE_MGR = hwmgr.o processpptables.o functiontables.o \
|
||||||
tonga_processpptables.o ppatomctrl.o \
|
tonga_processpptables.o ppatomctrl.o \
|
||||||
tonga_hwmgr.o pppcielanes.o tonga_thermal.o\
|
tonga_hwmgr.o pppcielanes.o tonga_thermal.o\
|
||||||
fiji_powertune.o fiji_hwmgr.o tonga_clockpowergating.o \
|
fiji_powertune.o fiji_hwmgr.o tonga_clockpowergating.o \
|
||||||
fiji_clockpowergating.o
|
fiji_clockpowergating.o fiji_thermal.o
|
||||||
|
|
||||||
AMD_PP_HWMGR = $(addprefix $(AMD_PP_PATH)/hwmgr/,$(HARDWARE_MGR))
|
AMD_PP_HWMGR = $(addprefix $(AMD_PP_PATH)/hwmgr/,$(HARDWARE_MGR))
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -50,8 +50,11 @@
|
||||||
#include "pp_debug.h"
|
#include "pp_debug.h"
|
||||||
#include "pp_acpi.h"
|
#include "pp_acpi.h"
|
||||||
#include "amd_pcie_helpers.h"
|
#include "amd_pcie_helpers.h"
|
||||||
|
#include "cgs_linux.h"
|
||||||
|
#include "ppinterrupt.h"
|
||||||
|
|
||||||
#include "fiji_clockpowergating.h"
|
#include "fiji_clockpowergating.h"
|
||||||
|
#include "fiji_thermal.h"
|
||||||
|
|
||||||
#define VOLTAGE_SCALE 4
|
#define VOLTAGE_SCALE 4
|
||||||
#define SMC_RAM_END 0x40000
|
#define SMC_RAM_END 0x40000
|
||||||
|
|
@ -694,6 +697,31 @@ static int fiji_hwmgr_backend_init(struct pp_hwmgr *hwmgr)
|
||||||
hwmgr->platform_descriptor.hardwarePerformanceLevels = 2;
|
hwmgr->platform_descriptor.hardwarePerformanceLevels = 2;
|
||||||
hwmgr->platform_descriptor.minimumClocksReductionPercentage = 50;
|
hwmgr->platform_descriptor.minimumClocksReductionPercentage = 50;
|
||||||
|
|
||||||
|
phm_cap_set(hwmgr->platform_descriptor.platformCaps,
|
||||||
|
PHM_PlatformCaps_FanSpeedInTableIsRPM);
|
||||||
|
|
||||||
|
if (table_info->cac_dtp_table->usDefaultTargetOperatingTemp &&
|
||||||
|
hwmgr->thermal_controller.
|
||||||
|
advanceFanControlParameters.ucFanControlMode) {
|
||||||
|
hwmgr->thermal_controller.advanceFanControlParameters.usMaxFanPWM =
|
||||||
|
hwmgr->thermal_controller.advanceFanControlParameters.usDefaultMaxFanPWM;
|
||||||
|
hwmgr->thermal_controller.advanceFanControlParameters.usMaxFanRPM =
|
||||||
|
hwmgr->thermal_controller.advanceFanControlParameters.usDefaultMaxFanRPM;
|
||||||
|
hwmgr->dyn_state.cac_dtp_table->usOperatingTempMinLimit =
|
||||||
|
table_info->cac_dtp_table->usOperatingTempMinLimit;
|
||||||
|
hwmgr->dyn_state.cac_dtp_table->usOperatingTempMaxLimit =
|
||||||
|
table_info->cac_dtp_table->usOperatingTempMaxLimit;
|
||||||
|
hwmgr->dyn_state.cac_dtp_table->usDefaultTargetOperatingTemp =
|
||||||
|
table_info->cac_dtp_table->usDefaultTargetOperatingTemp;
|
||||||
|
hwmgr->dyn_state.cac_dtp_table->usOperatingTempStep =
|
||||||
|
table_info->cac_dtp_table->usOperatingTempStep;
|
||||||
|
hwmgr->dyn_state.cac_dtp_table->usTargetOperatingTemp =
|
||||||
|
table_info->cac_dtp_table->usTargetOperatingTemp;
|
||||||
|
|
||||||
|
phm_cap_set(hwmgr->platform_descriptor.platformCaps,
|
||||||
|
PHM_PlatformCaps_ODFuzzyFanControlSupport);
|
||||||
|
}
|
||||||
|
|
||||||
sys_info.size = sizeof(struct cgs_system_info);
|
sys_info.size = sizeof(struct cgs_system_info);
|
||||||
sys_info.info_id = CGS_SYSTEM_INFO_PCIE_GEN_INFO;
|
sys_info.info_id = CGS_SYSTEM_INFO_PCIE_GEN_INFO;
|
||||||
result = cgs_query_system_info(hwmgr->device, &sys_info);
|
result = cgs_query_system_info(hwmgr->device, &sys_info);
|
||||||
|
|
@ -4915,6 +4943,108 @@ int fiji_display_configuration_changed_task(struct pp_hwmgr *hwmgr)
|
||||||
return fiji_program_display_gap(hwmgr);
|
return fiji_program_display_gap(hwmgr);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
static int fiji_set_max_fan_pwm_output(struct pp_hwmgr *hwmgr,
|
||||||
|
uint16_t us_max_fan_pwm)
|
||||||
|
{
|
||||||
|
hwmgr->thermal_controller.
|
||||||
|
advanceFanControlParameters.usMaxFanPWM = us_max_fan_pwm;
|
||||||
|
|
||||||
|
if (phm_is_hw_access_blocked(hwmgr))
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
return smum_send_msg_to_smc_with_parameter(hwmgr->smumgr,
|
||||||
|
PPSMC_MSG_SetFanPwmMax, us_max_fan_pwm);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int fiji_set_max_fan_rpm_output(struct pp_hwmgr *hwmgr,
|
||||||
|
uint16_t us_max_fan_rpm)
|
||||||
|
{
|
||||||
|
hwmgr->thermal_controller.
|
||||||
|
advanceFanControlParameters.usMaxFanRPM = us_max_fan_rpm;
|
||||||
|
|
||||||
|
if (phm_is_hw_access_blocked(hwmgr))
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
return smum_send_msg_to_smc_with_parameter(hwmgr->smumgr,
|
||||||
|
PPSMC_MSG_SetFanRpmMax, us_max_fan_rpm);
|
||||||
|
}
|
||||||
|
|
||||||
|
int fiji_dpm_set_interrupt_state(void *private_data,
|
||||||
|
unsigned src_id, unsigned type,
|
||||||
|
int enabled)
|
||||||
|
{
|
||||||
|
uint32_t cg_thermal_int;
|
||||||
|
struct pp_hwmgr *hwmgr = ((struct pp_eventmgr *)private_data)->hwmgr;
|
||||||
|
|
||||||
|
if (hwmgr == NULL)
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
switch (type) {
|
||||||
|
case AMD_THERMAL_IRQ_LOW_TO_HIGH:
|
||||||
|
if (enabled) {
|
||||||
|
cg_thermal_int = cgs_read_ind_register(hwmgr->device,
|
||||||
|
CGS_IND_REG__SMC, ixCG_THERMAL_INT);
|
||||||
|
cg_thermal_int |= CG_THERMAL_INT_CTRL__THERM_INTH_MASK_MASK;
|
||||||
|
cgs_write_ind_register(hwmgr->device,
|
||||||
|
CGS_IND_REG__SMC, ixCG_THERMAL_INT, cg_thermal_int);
|
||||||
|
} else {
|
||||||
|
cg_thermal_int = cgs_read_ind_register(hwmgr->device,
|
||||||
|
CGS_IND_REG__SMC, ixCG_THERMAL_INT);
|
||||||
|
cg_thermal_int &= ~CG_THERMAL_INT_CTRL__THERM_INTH_MASK_MASK;
|
||||||
|
cgs_write_ind_register(hwmgr->device,
|
||||||
|
CGS_IND_REG__SMC, ixCG_THERMAL_INT, cg_thermal_int);
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
|
||||||
|
case AMD_THERMAL_IRQ_HIGH_TO_LOW:
|
||||||
|
if (enabled) {
|
||||||
|
cg_thermal_int = cgs_read_ind_register(hwmgr->device,
|
||||||
|
CGS_IND_REG__SMC, ixCG_THERMAL_INT);
|
||||||
|
cg_thermal_int |= CG_THERMAL_INT_CTRL__THERM_INTL_MASK_MASK;
|
||||||
|
cgs_write_ind_register(hwmgr->device,
|
||||||
|
CGS_IND_REG__SMC, ixCG_THERMAL_INT, cg_thermal_int);
|
||||||
|
} else {
|
||||||
|
cg_thermal_int = cgs_read_ind_register(hwmgr->device,
|
||||||
|
CGS_IND_REG__SMC, ixCG_THERMAL_INT);
|
||||||
|
cg_thermal_int &= ~CG_THERMAL_INT_CTRL__THERM_INTL_MASK_MASK;
|
||||||
|
cgs_write_ind_register(hwmgr->device,
|
||||||
|
CGS_IND_REG__SMC, ixCG_THERMAL_INT, cg_thermal_int);
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
int fiji_register_internal_thermal_interrupt(struct pp_hwmgr *hwmgr,
|
||||||
|
const void *thermal_interrupt_info)
|
||||||
|
{
|
||||||
|
int result;
|
||||||
|
const struct pp_interrupt_registration_info *info =
|
||||||
|
(const struct pp_interrupt_registration_info *)
|
||||||
|
thermal_interrupt_info;
|
||||||
|
|
||||||
|
if (info == NULL)
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
result = cgs_add_irq_source(hwmgr->device, 230, AMD_THERMAL_IRQ_LAST,
|
||||||
|
fiji_dpm_set_interrupt_state,
|
||||||
|
info->call_back, info->context);
|
||||||
|
|
||||||
|
if (result)
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
result = cgs_add_irq_source(hwmgr->device, 231, AMD_THERMAL_IRQ_LAST,
|
||||||
|
fiji_dpm_set_interrupt_state,
|
||||||
|
info->call_back, info->context);
|
||||||
|
|
||||||
|
if (result)
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
static const struct pp_hwmgr_func fiji_hwmgr_funcs = {
|
static const struct pp_hwmgr_func fiji_hwmgr_funcs = {
|
||||||
.backend_init = &fiji_hwmgr_backend_init,
|
.backend_init = &fiji_hwmgr_backend_init,
|
||||||
.backend_fini = &tonga_hwmgr_backend_fini,
|
.backend_fini = &tonga_hwmgr_backend_fini,
|
||||||
|
|
@ -4936,6 +5066,18 @@ static const struct pp_hwmgr_func fiji_hwmgr_funcs = {
|
||||||
.notify_smc_display_config_after_ps_adjustment =
|
.notify_smc_display_config_after_ps_adjustment =
|
||||||
&tonga_notify_smc_display_config_after_ps_adjustment,
|
&tonga_notify_smc_display_config_after_ps_adjustment,
|
||||||
.display_config_changed = &fiji_display_configuration_changed_task,
|
.display_config_changed = &fiji_display_configuration_changed_task,
|
||||||
|
.set_max_fan_pwm_output = fiji_set_max_fan_pwm_output,
|
||||||
|
.set_max_fan_rpm_output = fiji_set_max_fan_rpm_output,
|
||||||
|
.get_temperature = fiji_thermal_get_temperature,
|
||||||
|
.stop_thermal_controller = fiji_thermal_stop_thermal_controller,
|
||||||
|
.get_fan_speed_info = fiji_fan_ctrl_get_fan_speed_info,
|
||||||
|
.get_fan_speed_percent = fiji_fan_ctrl_get_fan_speed_percent,
|
||||||
|
.set_fan_speed_percent = fiji_fan_ctrl_set_fan_speed_percent,
|
||||||
|
.reset_fan_speed_to_default = fiji_fan_ctrl_reset_fan_speed_to_default,
|
||||||
|
.get_fan_speed_rpm = fiji_fan_ctrl_get_fan_speed_rpm,
|
||||||
|
.set_fan_speed_rpm = fiji_fan_ctrl_set_fan_speed_rpm,
|
||||||
|
.uninitialize_thermal_controller = fiji_thermal_ctrl_uninitialize_thermal_controller,
|
||||||
|
.register_internal_thermal_interrupt = fiji_register_internal_thermal_interrupt,
|
||||||
};
|
};
|
||||||
|
|
||||||
int fiji_hwmgr_init(struct pp_hwmgr *hwmgr)
|
int fiji_hwmgr_init(struct pp_hwmgr *hwmgr)
|
||||||
|
|
@ -4950,5 +5092,6 @@ int fiji_hwmgr_init(struct pp_hwmgr *hwmgr)
|
||||||
hwmgr->backend = data;
|
hwmgr->backend = data;
|
||||||
hwmgr->hwmgr_func = &fiji_hwmgr_funcs;
|
hwmgr->hwmgr_func = &fiji_hwmgr_funcs;
|
||||||
hwmgr->pptable_func = &tonga_pptable_funcs;
|
hwmgr->pptable_func = &tonga_pptable_funcs;
|
||||||
|
pp_fiji_thermal_initialize(hwmgr);
|
||||||
return ret;
|
return ret;
|
||||||
}
|
}
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,687 @@
|
||||||
|
/*
|
||||||
|
* Copyright 2015 Advanced Micro Devices, Inc.
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
||||||
|
* copy of this software and associated documentation files (the "Software"),
|
||||||
|
* to deal in the Software without restriction, including without limitation
|
||||||
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
||||||
|
* and/or sell copies of the Software, and to permit persons to whom the
|
||||||
|
* Software is furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
||||||
|
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
|
||||||
|
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
|
||||||
|
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||||
|
* OTHER DEALINGS IN THE SOFTWARE.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "fiji_thermal.h"
|
||||||
|
#include "fiji_hwmgr.h"
|
||||||
|
#include "fiji_smumgr.h"
|
||||||
|
#include "fiji_ppsmc.h"
|
||||||
|
#include "smu/smu_7_1_3_d.h"
|
||||||
|
#include "smu/smu_7_1_3_sh_mask.h"
|
||||||
|
|
||||||
|
int fiji_fan_ctrl_get_fan_speed_info(struct pp_hwmgr *hwmgr,
|
||||||
|
struct phm_fan_speed_info *fan_speed_info)
|
||||||
|
{
|
||||||
|
|
||||||
|
if (hwmgr->thermal_controller.fanInfo.bNoFan)
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
fan_speed_info->supports_percent_read = true;
|
||||||
|
fan_speed_info->supports_percent_write = true;
|
||||||
|
fan_speed_info->min_percent = 0;
|
||||||
|
fan_speed_info->max_percent = 100;
|
||||||
|
|
||||||
|
if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
|
||||||
|
PHM_PlatformCaps_FanSpeedInTableIsRPM) &&
|
||||||
|
hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution) {
|
||||||
|
fan_speed_info->supports_rpm_read = true;
|
||||||
|
fan_speed_info->supports_rpm_write = true;
|
||||||
|
fan_speed_info->min_rpm = hwmgr->thermal_controller.fanInfo.ulMinRPM;
|
||||||
|
fan_speed_info->max_rpm = hwmgr->thermal_controller.fanInfo.ulMaxRPM;
|
||||||
|
} else {
|
||||||
|
fan_speed_info->min_rpm = 0;
|
||||||
|
fan_speed_info->max_rpm = 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
int fiji_fan_ctrl_get_fan_speed_percent(struct pp_hwmgr *hwmgr,
|
||||||
|
uint32_t *speed)
|
||||||
|
{
|
||||||
|
uint32_t duty100;
|
||||||
|
uint32_t duty;
|
||||||
|
uint64_t tmp64;
|
||||||
|
|
||||||
|
if (hwmgr->thermal_controller.fanInfo.bNoFan)
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
|
||||||
|
CG_FDO_CTRL1, FMAX_DUTY100);
|
||||||
|
duty = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
|
||||||
|
CG_THERMAL_STATUS, FDO_PWM_DUTY);
|
||||||
|
|
||||||
|
if (duty100 == 0)
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
|
||||||
|
tmp64 = (uint64_t)duty * 100;
|
||||||
|
do_div(tmp64, duty100);
|
||||||
|
*speed = (uint32_t)tmp64;
|
||||||
|
|
||||||
|
if (*speed > 100)
|
||||||
|
*speed = 100;
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
int fiji_fan_ctrl_get_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t *speed)
|
||||||
|
{
|
||||||
|
uint32_t tach_period;
|
||||||
|
uint32_t crystal_clock_freq;
|
||||||
|
|
||||||
|
if (hwmgr->thermal_controller.fanInfo.bNoFan ||
|
||||||
|
(hwmgr->thermal_controller.fanInfo.
|
||||||
|
ucTachometerPulsesPerRevolution == 0))
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
tach_period = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
|
||||||
|
CG_TACH_STATUS, TACH_PERIOD);
|
||||||
|
|
||||||
|
if (tach_period == 0)
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
crystal_clock_freq = tonga_get_xclk(hwmgr);
|
||||||
|
|
||||||
|
*speed = 60 * crystal_clock_freq * 10000/ tach_period;
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Set Fan Speed Control to static mode, so that the user can decide what speed to use.
|
||||||
|
* @param hwmgr the address of the powerplay hardware manager.
|
||||||
|
* mode the fan control mode, 0 default, 1 by percent, 5, by RPM
|
||||||
|
* @exception Should always succeed.
|
||||||
|
*/
|
||||||
|
int fiji_fan_ctrl_set_static_mode(struct pp_hwmgr *hwmgr, uint32_t mode)
|
||||||
|
{
|
||||||
|
|
||||||
|
if (hwmgr->fan_ctrl_is_in_default_mode) {
|
||||||
|
hwmgr->fan_ctrl_default_mode =
|
||||||
|
PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
|
||||||
|
CG_FDO_CTRL2, FDO_PWM_MODE);
|
||||||
|
hwmgr->tmin =
|
||||||
|
PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
|
||||||
|
CG_FDO_CTRL2, TMIN);
|
||||||
|
hwmgr->fan_ctrl_is_in_default_mode = false;
|
||||||
|
}
|
||||||
|
|
||||||
|
PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
|
||||||
|
CG_FDO_CTRL2, TMIN, 0);
|
||||||
|
PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
|
||||||
|
CG_FDO_CTRL2, FDO_PWM_MODE, mode);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Reset Fan Speed Control to default mode.
|
||||||
|
* @param hwmgr the address of the powerplay hardware manager.
|
||||||
|
* @exception Should always succeed.
|
||||||
|
*/
|
||||||
|
int fiji_fan_ctrl_set_default_mode(struct pp_hwmgr *hwmgr)
|
||||||
|
{
|
||||||
|
if (hwmgr->fan_ctrl_is_in_default_mode) {
|
||||||
|
PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
|
||||||
|
CG_FDO_CTRL2, FDO_PWM_MODE, hwmgr->fan_ctrl_default_mode);
|
||||||
|
PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
|
||||||
|
CG_FDO_CTRL2, TMIN, hwmgr->tmin);
|
||||||
|
hwmgr->fan_ctrl_is_in_default_mode = true;
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
int fiji_fan_ctrl_start_smc_fan_control(struct pp_hwmgr *hwmgr)
|
||||||
|
{
|
||||||
|
int result;
|
||||||
|
|
||||||
|
if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
|
||||||
|
PHM_PlatformCaps_ODFuzzyFanControlSupport)) {
|
||||||
|
cgs_write_register(hwmgr->device, mmSMC_MSG_ARG_0, FAN_CONTROL_FUZZY);
|
||||||
|
result = smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_StartFanControl);
|
||||||
|
|
||||||
|
if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
|
||||||
|
PHM_PlatformCaps_FanSpeedInTableIsRPM))
|
||||||
|
hwmgr->hwmgr_func->set_max_fan_rpm_output(hwmgr,
|
||||||
|
hwmgr->thermal_controller.
|
||||||
|
advanceFanControlParameters.usMaxFanRPM);
|
||||||
|
else
|
||||||
|
hwmgr->hwmgr_func->set_max_fan_pwm_output(hwmgr,
|
||||||
|
hwmgr->thermal_controller.
|
||||||
|
advanceFanControlParameters.usMaxFanPWM);
|
||||||
|
|
||||||
|
} else {
|
||||||
|
cgs_write_register(hwmgr->device, mmSMC_MSG_ARG_0, FAN_CONTROL_TABLE);
|
||||||
|
result = smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_StartFanControl);
|
||||||
|
}
|
||||||
|
|
||||||
|
if (!result && hwmgr->thermal_controller.
|
||||||
|
advanceFanControlParameters.ucTargetTemperature)
|
||||||
|
result = smum_send_msg_to_smc_with_parameter(hwmgr->smumgr,
|
||||||
|
PPSMC_MSG_SetFanTemperatureTarget,
|
||||||
|
hwmgr->thermal_controller.
|
||||||
|
advanceFanControlParameters.ucTargetTemperature);
|
||||||
|
|
||||||
|
return result;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
int fiji_fan_ctrl_stop_smc_fan_control(struct pp_hwmgr *hwmgr)
|
||||||
|
{
|
||||||
|
return smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_StopFanControl);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Set Fan Speed in percent.
|
||||||
|
* @param hwmgr the address of the powerplay hardware manager.
|
||||||
|
* @param speed is the percentage value (0% - 100%) to be set.
|
||||||
|
* @exception Fails is the 100% setting appears to be 0.
|
||||||
|
*/
|
||||||
|
int fiji_fan_ctrl_set_fan_speed_percent(struct pp_hwmgr *hwmgr,
|
||||||
|
uint32_t speed)
|
||||||
|
{
|
||||||
|
uint32_t duty100;
|
||||||
|
uint32_t duty;
|
||||||
|
uint64_t tmp64;
|
||||||
|
|
||||||
|
if (hwmgr->thermal_controller.fanInfo.bNoFan)
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
if (speed > 100)
|
||||||
|
speed = 100;
|
||||||
|
|
||||||
|
if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
|
||||||
|
PHM_PlatformCaps_MicrocodeFanControl))
|
||||||
|
fiji_fan_ctrl_stop_smc_fan_control(hwmgr);
|
||||||
|
|
||||||
|
duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
|
||||||
|
CG_FDO_CTRL1, FMAX_DUTY100);
|
||||||
|
|
||||||
|
if (duty100 == 0)
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
tmp64 = (uint64_t)speed * 100;
|
||||||
|
do_div(tmp64, duty100);
|
||||||
|
duty = (uint32_t)tmp64;
|
||||||
|
|
||||||
|
PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
|
||||||
|
CG_FDO_CTRL0, FDO_STATIC_DUTY, duty);
|
||||||
|
|
||||||
|
return fiji_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Reset Fan Speed to default.
|
||||||
|
* @param hwmgr the address of the powerplay hardware manager.
|
||||||
|
* @exception Always succeeds.
|
||||||
|
*/
|
||||||
|
int fiji_fan_ctrl_reset_fan_speed_to_default(struct pp_hwmgr *hwmgr)
|
||||||
|
{
|
||||||
|
int result;
|
||||||
|
|
||||||
|
if (hwmgr->thermal_controller.fanInfo.bNoFan)
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
|
||||||
|
PHM_PlatformCaps_MicrocodeFanControl)) {
|
||||||
|
result = fiji_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC);
|
||||||
|
if (!result)
|
||||||
|
result = fiji_fan_ctrl_start_smc_fan_control(hwmgr);
|
||||||
|
} else
|
||||||
|
result = fiji_fan_ctrl_set_default_mode(hwmgr);
|
||||||
|
|
||||||
|
return result;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Set Fan Speed in RPM.
|
||||||
|
* @param hwmgr the address of the powerplay hardware manager.
|
||||||
|
* @param speed is the percentage value (min - max) to be set.
|
||||||
|
* @exception Fails is the speed not lie between min and max.
|
||||||
|
*/
|
||||||
|
int fiji_fan_ctrl_set_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t speed)
|
||||||
|
{
|
||||||
|
uint32_t tach_period;
|
||||||
|
uint32_t crystal_clock_freq;
|
||||||
|
|
||||||
|
if (hwmgr->thermal_controller.fanInfo.bNoFan ||
|
||||||
|
(hwmgr->thermal_controller.fanInfo.
|
||||||
|
ucTachometerPulsesPerRevolution == 0) ||
|
||||||
|
(speed < hwmgr->thermal_controller.fanInfo.ulMinRPM) ||
|
||||||
|
(speed > hwmgr->thermal_controller.fanInfo.ulMaxRPM))
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
crystal_clock_freq = tonga_get_xclk(hwmgr);
|
||||||
|
|
||||||
|
tach_period = 60 * crystal_clock_freq * 10000 / (8 * speed);
|
||||||
|
|
||||||
|
PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
|
||||||
|
CG_TACH_STATUS, TACH_PERIOD, tach_period);
|
||||||
|
|
||||||
|
return fiji_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Reads the remote temperature from the SIslands thermal controller.
|
||||||
|
*
|
||||||
|
* @param hwmgr The address of the hardware manager.
|
||||||
|
*/
|
||||||
|
int fiji_thermal_get_temperature(struct pp_hwmgr *hwmgr)
|
||||||
|
{
|
||||||
|
int temp;
|
||||||
|
|
||||||
|
temp = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
|
||||||
|
CG_MULT_THERMAL_STATUS, CTF_TEMP);
|
||||||
|
|
||||||
|
/* Bit 9 means the reading is lower than the lowest usable value. */
|
||||||
|
if (temp & 0x200)
|
||||||
|
temp = FIJI_THERMAL_MAXIMUM_TEMP_READING;
|
||||||
|
else
|
||||||
|
temp = temp & 0x1ff;
|
||||||
|
|
||||||
|
temp *= PP_TEMPERATURE_UNITS_PER_CENTIGRADES;
|
||||||
|
|
||||||
|
return temp;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Set the requested temperature range for high and low alert signals
|
||||||
|
*
|
||||||
|
* @param hwmgr The address of the hardware manager.
|
||||||
|
* @param range Temperature range to be programmed for high and low alert signals
|
||||||
|
* @exception PP_Result_BadInput if the input data is not valid.
|
||||||
|
*/
|
||||||
|
static int fiji_thermal_set_temperature_range(struct pp_hwmgr *hwmgr,
|
||||||
|
uint32_t low_temp, uint32_t high_temp)
|
||||||
|
{
|
||||||
|
uint32_t low = FIJI_THERMAL_MINIMUM_ALERT_TEMP *
|
||||||
|
PP_TEMPERATURE_UNITS_PER_CENTIGRADES;
|
||||||
|
uint32_t high = FIJI_THERMAL_MAXIMUM_ALERT_TEMP *
|
||||||
|
PP_TEMPERATURE_UNITS_PER_CENTIGRADES;
|
||||||
|
|
||||||
|
if (low < low_temp)
|
||||||
|
low = low_temp;
|
||||||
|
if (high > high_temp)
|
||||||
|
high = high_temp;
|
||||||
|
|
||||||
|
if (low > high)
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
|
||||||
|
CG_THERMAL_INT, DIG_THERM_INTH,
|
||||||
|
(high / PP_TEMPERATURE_UNITS_PER_CENTIGRADES));
|
||||||
|
PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
|
||||||
|
CG_THERMAL_INT, DIG_THERM_INTL,
|
||||||
|
(low / PP_TEMPERATURE_UNITS_PER_CENTIGRADES));
|
||||||
|
PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
|
||||||
|
CG_THERMAL_CTRL, DIG_THERM_DPM,
|
||||||
|
(high / PP_TEMPERATURE_UNITS_PER_CENTIGRADES));
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Programs thermal controller one-time setting registers
|
||||||
|
*
|
||||||
|
* @param hwmgr The address of the hardware manager.
|
||||||
|
*/
|
||||||
|
static int fiji_thermal_initialize(struct pp_hwmgr *hwmgr)
|
||||||
|
{
|
||||||
|
if (hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution)
|
||||||
|
PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
|
||||||
|
CG_TACH_CTRL, EDGE_PER_REV,
|
||||||
|
hwmgr->thermal_controller.fanInfo.
|
||||||
|
ucTachometerPulsesPerRevolution - 1);
|
||||||
|
|
||||||
|
PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
|
||||||
|
CG_FDO_CTRL2, TACH_PWM_RESP_RATE, 0x28);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Enable thermal alerts on the RV770 thermal controller.
|
||||||
|
*
|
||||||
|
* @param hwmgr The address of the hardware manager.
|
||||||
|
*/
|
||||||
|
static int fiji_thermal_enable_alert(struct pp_hwmgr *hwmgr)
|
||||||
|
{
|
||||||
|
uint32_t alert;
|
||||||
|
|
||||||
|
alert = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
|
||||||
|
CG_THERMAL_INT, THERM_INT_MASK);
|
||||||
|
alert &= ~(FIJI_THERMAL_HIGH_ALERT_MASK | FIJI_THERMAL_LOW_ALERT_MASK);
|
||||||
|
PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
|
||||||
|
CG_THERMAL_INT, THERM_INT_MASK, alert);
|
||||||
|
|
||||||
|
/* send message to SMU to enable internal thermal interrupts */
|
||||||
|
return smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_MSG_Thermal_Cntl_Enable);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Disable thermal alerts on the RV770 thermal controller.
|
||||||
|
* @param hwmgr The address of the hardware manager.
|
||||||
|
*/
|
||||||
|
static int fiji_thermal_disable_alert(struct pp_hwmgr *hwmgr)
|
||||||
|
{
|
||||||
|
uint32_t alert;
|
||||||
|
|
||||||
|
alert = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
|
||||||
|
CG_THERMAL_INT, THERM_INT_MASK);
|
||||||
|
alert |= (FIJI_THERMAL_HIGH_ALERT_MASK | FIJI_THERMAL_LOW_ALERT_MASK);
|
||||||
|
PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
|
||||||
|
CG_THERMAL_INT, THERM_INT_MASK, alert);
|
||||||
|
|
||||||
|
/* send message to SMU to disable internal thermal interrupts */
|
||||||
|
return smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_MSG_Thermal_Cntl_Disable);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Uninitialize the thermal controller.
|
||||||
|
* Currently just disables alerts.
|
||||||
|
* @param hwmgr The address of the hardware manager.
|
||||||
|
*/
|
||||||
|
int fiji_thermal_stop_thermal_controller(struct pp_hwmgr *hwmgr)
|
||||||
|
{
|
||||||
|
int result = fiji_thermal_disable_alert(hwmgr);
|
||||||
|
|
||||||
|
if (hwmgr->thermal_controller.fanInfo.bNoFan)
|
||||||
|
fiji_fan_ctrl_set_default_mode(hwmgr);
|
||||||
|
|
||||||
|
return result;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Set up the fan table to control the fan using the SMC.
|
||||||
|
* @param hwmgr the address of the powerplay hardware manager.
|
||||||
|
* @param pInput the pointer to input data
|
||||||
|
* @param pOutput the pointer to output data
|
||||||
|
* @param pStorage the pointer to temporary storage
|
||||||
|
* @param Result the last failure code
|
||||||
|
* @return result from set temperature range routine
|
||||||
|
*/
|
||||||
|
int tf_fiji_thermal_setup_fan_table(struct pp_hwmgr *hwmgr,
|
||||||
|
void *input, void *output, void *storage, int result)
|
||||||
|
{
|
||||||
|
struct fiji_hwmgr *data = (struct fiji_hwmgr *)(hwmgr->backend);
|
||||||
|
SMU73_Discrete_FanTable fan_table = { FDO_MODE_HARDWARE };
|
||||||
|
uint32_t duty100;
|
||||||
|
uint32_t t_diff1, t_diff2, pwm_diff1, pwm_diff2;
|
||||||
|
uint16_t fdo_min, slope1, slope2;
|
||||||
|
uint32_t reference_clock;
|
||||||
|
int res;
|
||||||
|
uint64_t tmp64;
|
||||||
|
|
||||||
|
if (data->fan_table_start == 0) {
|
||||||
|
phm_cap_unset(hwmgr->platform_descriptor.platformCaps,
|
||||||
|
PHM_PlatformCaps_MicrocodeFanControl);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
|
||||||
|
CG_FDO_CTRL1, FMAX_DUTY100);
|
||||||
|
|
||||||
|
if (duty100 == 0) {
|
||||||
|
phm_cap_unset(hwmgr->platform_descriptor.platformCaps,
|
||||||
|
PHM_PlatformCaps_MicrocodeFanControl);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
tmp64 = hwmgr->thermal_controller.advanceFanControlParameters.
|
||||||
|
usPWMMin * duty100;
|
||||||
|
do_div(tmp64, 10000);
|
||||||
|
fdo_min = (uint16_t)tmp64;
|
||||||
|
|
||||||
|
t_diff1 = hwmgr->thermal_controller.advanceFanControlParameters.usTMed -
|
||||||
|
hwmgr->thermal_controller.advanceFanControlParameters.usTMin;
|
||||||
|
t_diff2 = hwmgr->thermal_controller.advanceFanControlParameters.usTHigh -
|
||||||
|
hwmgr->thermal_controller.advanceFanControlParameters.usTMed;
|
||||||
|
|
||||||
|
pwm_diff1 = hwmgr->thermal_controller.advanceFanControlParameters.usPWMMed -
|
||||||
|
hwmgr->thermal_controller.advanceFanControlParameters.usPWMMin;
|
||||||
|
pwm_diff2 = hwmgr->thermal_controller.advanceFanControlParameters.usPWMHigh -
|
||||||
|
hwmgr->thermal_controller.advanceFanControlParameters.usPWMMed;
|
||||||
|
|
||||||
|
slope1 = (uint16_t)((50 + ((16 * duty100 * pwm_diff1) / t_diff1)) / 100);
|
||||||
|
slope2 = (uint16_t)((50 + ((16 * duty100 * pwm_diff2) / t_diff2)) / 100);
|
||||||
|
|
||||||
|
fan_table.TempMin = cpu_to_be16((50 + hwmgr->
|
||||||
|
thermal_controller.advanceFanControlParameters.usTMin) / 100);
|
||||||
|
fan_table.TempMed = cpu_to_be16((50 + hwmgr->
|
||||||
|
thermal_controller.advanceFanControlParameters.usTMed) / 100);
|
||||||
|
fan_table.TempMax = cpu_to_be16((50 + hwmgr->
|
||||||
|
thermal_controller.advanceFanControlParameters.usTMax) / 100);
|
||||||
|
|
||||||
|
fan_table.Slope1 = cpu_to_be16(slope1);
|
||||||
|
fan_table.Slope2 = cpu_to_be16(slope2);
|
||||||
|
|
||||||
|
fan_table.FdoMin = cpu_to_be16(fdo_min);
|
||||||
|
|
||||||
|
fan_table.HystDown = cpu_to_be16(hwmgr->
|
||||||
|
thermal_controller.advanceFanControlParameters.ucTHyst);
|
||||||
|
|
||||||
|
fan_table.HystUp = cpu_to_be16(1);
|
||||||
|
|
||||||
|
fan_table.HystSlope = cpu_to_be16(1);
|
||||||
|
|
||||||
|
fan_table.TempRespLim = cpu_to_be16(5);
|
||||||
|
|
||||||
|
reference_clock = tonga_get_xclk(hwmgr);
|
||||||
|
|
||||||
|
fan_table.RefreshPeriod = cpu_to_be32((hwmgr->
|
||||||
|
thermal_controller.advanceFanControlParameters.ulCycleDelay *
|
||||||
|
reference_clock) / 1600);
|
||||||
|
|
||||||
|
fan_table.FdoMax = cpu_to_be16((uint16_t)duty100);
|
||||||
|
|
||||||
|
fan_table.TempSrc = (uint8_t)PHM_READ_VFPF_INDIRECT_FIELD(
|
||||||
|
hwmgr->device, CGS_IND_REG__SMC,
|
||||||
|
CG_MULT_THERMAL_CTRL, TEMP_SEL);
|
||||||
|
|
||||||
|
res = fiji_copy_bytes_to_smc(hwmgr->smumgr, data->fan_table_start,
|
||||||
|
(uint8_t *)&fan_table, (uint32_t)sizeof(fan_table),
|
||||||
|
data->sram_end);
|
||||||
|
|
||||||
|
if (!res && hwmgr->thermal_controller.
|
||||||
|
advanceFanControlParameters.ucMinimumPWMLimit)
|
||||||
|
res = smum_send_msg_to_smc_with_parameter(hwmgr->smumgr,
|
||||||
|
PPSMC_MSG_SetFanMinPwm,
|
||||||
|
hwmgr->thermal_controller.
|
||||||
|
advanceFanControlParameters.ucMinimumPWMLimit);
|
||||||
|
|
||||||
|
if (!res && hwmgr->thermal_controller.
|
||||||
|
advanceFanControlParameters.ulMinFanSCLKAcousticLimit)
|
||||||
|
res = smum_send_msg_to_smc_with_parameter(hwmgr->smumgr,
|
||||||
|
PPSMC_MSG_SetFanSclkTarget,
|
||||||
|
hwmgr->thermal_controller.
|
||||||
|
advanceFanControlParameters.ulMinFanSCLKAcousticLimit);
|
||||||
|
|
||||||
|
if (res)
|
||||||
|
phm_cap_unset(hwmgr->platform_descriptor.platformCaps,
|
||||||
|
PHM_PlatformCaps_MicrocodeFanControl);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Start the fan control on the SMC.
|
||||||
|
* @param hwmgr the address of the powerplay hardware manager.
|
||||||
|
* @param pInput the pointer to input data
|
||||||
|
* @param pOutput the pointer to output data
|
||||||
|
* @param pStorage the pointer to temporary storage
|
||||||
|
* @param Result the last failure code
|
||||||
|
* @return result from set temperature range routine
|
||||||
|
*/
|
||||||
|
int tf_fiji_thermal_start_smc_fan_control(struct pp_hwmgr *hwmgr,
|
||||||
|
void *input, void *output, void *storage, int result)
|
||||||
|
{
|
||||||
|
/* If the fantable setup has failed we could have disabled
|
||||||
|
* PHM_PlatformCaps_MicrocodeFanControl even after
|
||||||
|
* this function was included in the table.
|
||||||
|
* Make sure that we still think controlling the fan is OK.
|
||||||
|
*/
|
||||||
|
if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
|
||||||
|
PHM_PlatformCaps_MicrocodeFanControl)) {
|
||||||
|
fiji_fan_ctrl_start_smc_fan_control(hwmgr);
|
||||||
|
fiji_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC);
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Set temperature range for high and low alerts
|
||||||
|
* @param hwmgr the address of the powerplay hardware manager.
|
||||||
|
* @param pInput the pointer to input data
|
||||||
|
* @param pOutput the pointer to output data
|
||||||
|
* @param pStorage the pointer to temporary storage
|
||||||
|
* @param Result the last failure code
|
||||||
|
* @return result from set temperature range routine
|
||||||
|
*/
|
||||||
|
int tf_fiji_thermal_set_temperature_range(struct pp_hwmgr *hwmgr,
|
||||||
|
void *input, void *output, void *storage, int result)
|
||||||
|
{
|
||||||
|
struct PP_TemperatureRange *range = (struct PP_TemperatureRange *)input;
|
||||||
|
|
||||||
|
if (range == NULL)
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
return fiji_thermal_set_temperature_range(hwmgr, range->min, range->max);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Programs one-time setting registers
|
||||||
|
* @param hwmgr the address of the powerplay hardware manager.
|
||||||
|
* @param pInput the pointer to input data
|
||||||
|
* @param pOutput the pointer to output data
|
||||||
|
* @param pStorage the pointer to temporary storage
|
||||||
|
* @param Result the last failure code
|
||||||
|
* @return result from initialize thermal controller routine
|
||||||
|
*/
|
||||||
|
int tf_fiji_thermal_initialize(struct pp_hwmgr *hwmgr,
|
||||||
|
void *input, void *output, void *storage, int result)
|
||||||
|
{
|
||||||
|
return fiji_thermal_initialize(hwmgr);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Enable high and low alerts
|
||||||
|
* @param hwmgr the address of the powerplay hardware manager.
|
||||||
|
* @param pInput the pointer to input data
|
||||||
|
* @param pOutput the pointer to output data
|
||||||
|
* @param pStorage the pointer to temporary storage
|
||||||
|
* @param Result the last failure code
|
||||||
|
* @return result from enable alert routine
|
||||||
|
*/
|
||||||
|
int tf_fiji_thermal_enable_alert(struct pp_hwmgr *hwmgr,
|
||||||
|
void *input, void *output, void *storage, int result)
|
||||||
|
{
|
||||||
|
return fiji_thermal_enable_alert(hwmgr);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Disable high and low alerts
|
||||||
|
* @param hwmgr the address of the powerplay hardware manager.
|
||||||
|
* @param pInput the pointer to input data
|
||||||
|
* @param pOutput the pointer to output data
|
||||||
|
* @param pStorage the pointer to temporary storage
|
||||||
|
* @param Result the last failure code
|
||||||
|
* @return result from disable alert routine
|
||||||
|
*/
|
||||||
|
static int tf_fiji_thermal_disable_alert(struct pp_hwmgr *hwmgr,
|
||||||
|
void *input, void *output, void *storage, int result)
|
||||||
|
{
|
||||||
|
return fiji_thermal_disable_alert(hwmgr);
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct phm_master_table_item
|
||||||
|
fiji_thermal_start_thermal_controller_master_list[] = {
|
||||||
|
{NULL, tf_fiji_thermal_initialize},
|
||||||
|
{NULL, tf_fiji_thermal_set_temperature_range},
|
||||||
|
{NULL, tf_fiji_thermal_enable_alert},
|
||||||
|
/* We should restrict performance levels to low before we halt the SMC.
|
||||||
|
* On the other hand we are still in boot state when we do this
|
||||||
|
* so it would be pointless.
|
||||||
|
* If this assumption changes we have to revisit this table.
|
||||||
|
*/
|
||||||
|
{NULL, tf_fiji_thermal_setup_fan_table},
|
||||||
|
{NULL, tf_fiji_thermal_start_smc_fan_control},
|
||||||
|
{NULL, NULL}
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct phm_master_table_header
|
||||||
|
fiji_thermal_start_thermal_controller_master = {
|
||||||
|
0,
|
||||||
|
PHM_MasterTableFlag_None,
|
||||||
|
fiji_thermal_start_thermal_controller_master_list
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct phm_master_table_item
|
||||||
|
fiji_thermal_set_temperature_range_master_list[] = {
|
||||||
|
{NULL, tf_fiji_thermal_disable_alert},
|
||||||
|
{NULL, tf_fiji_thermal_set_temperature_range},
|
||||||
|
{NULL, tf_fiji_thermal_enable_alert},
|
||||||
|
{NULL, NULL}
|
||||||
|
};
|
||||||
|
|
||||||
|
struct phm_master_table_header
|
||||||
|
fiji_thermal_set_temperature_range_master = {
|
||||||
|
0,
|
||||||
|
PHM_MasterTableFlag_None,
|
||||||
|
fiji_thermal_set_temperature_range_master_list
|
||||||
|
};
|
||||||
|
|
||||||
|
int fiji_thermal_ctrl_uninitialize_thermal_controller(struct pp_hwmgr *hwmgr)
|
||||||
|
{
|
||||||
|
if (!hwmgr->thermal_controller.fanInfo.bNoFan)
|
||||||
|
fiji_fan_ctrl_set_default_mode(hwmgr);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Initializes the thermal controller related functions in the Hardware Manager structure.
|
||||||
|
* @param hwmgr The address of the hardware manager.
|
||||||
|
* @exception Any error code from the low-level communication.
|
||||||
|
*/
|
||||||
|
int pp_fiji_thermal_initialize(struct pp_hwmgr *hwmgr)
|
||||||
|
{
|
||||||
|
int result;
|
||||||
|
|
||||||
|
result = phm_construct_table(hwmgr,
|
||||||
|
&fiji_thermal_set_temperature_range_master,
|
||||||
|
&(hwmgr->set_temperature_range));
|
||||||
|
|
||||||
|
if (!result) {
|
||||||
|
result = phm_construct_table(hwmgr,
|
||||||
|
&fiji_thermal_start_thermal_controller_master,
|
||||||
|
&(hwmgr->start_thermal_controller));
|
||||||
|
if (result)
|
||||||
|
phm_destroy_table(hwmgr, &(hwmgr->set_temperature_range));
|
||||||
|
}
|
||||||
|
|
||||||
|
if (!result)
|
||||||
|
hwmgr->fan_ctrl_is_in_default_mode = true;
|
||||||
|
return result;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
@ -0,0 +1,61 @@
|
||||||
|
/*
|
||||||
|
* Copyright 2015 Advanced Micro Devices, Inc.
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
||||||
|
* copy of this software and associated documentation files (the "Software"),
|
||||||
|
* to deal in the Software without restriction, including without limitation
|
||||||
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
||||||
|
* and/or sell copies of the Software, and to permit persons to whom the
|
||||||
|
* Software is furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
||||||
|
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
|
||||||
|
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
|
||||||
|
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||||
|
* OTHER DEALINGS IN THE SOFTWARE.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef FIJI_THERMAL_H
|
||||||
|
#define FIJI_THERMAL_H
|
||||||
|
|
||||||
|
#include "hwmgr.h"
|
||||||
|
|
||||||
|
#define FIJI_THERMAL_HIGH_ALERT_MASK 0x1
|
||||||
|
#define FIJI_THERMAL_LOW_ALERT_MASK 0x2
|
||||||
|
|
||||||
|
#define FIJI_THERMAL_MINIMUM_TEMP_READING -256
|
||||||
|
#define FIJI_THERMAL_MAXIMUM_TEMP_READING 255
|
||||||
|
|
||||||
|
#define FIJI_THERMAL_MINIMUM_ALERT_TEMP 0
|
||||||
|
#define FIJI_THERMAL_MAXIMUM_ALERT_TEMP 255
|
||||||
|
|
||||||
|
#define FDO_PWM_MODE_STATIC 1
|
||||||
|
#define FDO_PWM_MODE_STATIC_RPM 5
|
||||||
|
|
||||||
|
|
||||||
|
extern int tf_fiji_thermal_initialize(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result);
|
||||||
|
extern int tf_fiji_thermal_set_temperature_range(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result);
|
||||||
|
extern int tf_fiji_thermal_enable_alert(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result);
|
||||||
|
|
||||||
|
extern int fiji_thermal_get_temperature(struct pp_hwmgr *hwmgr);
|
||||||
|
extern int fiji_thermal_stop_thermal_controller(struct pp_hwmgr *hwmgr);
|
||||||
|
extern int fiji_fan_ctrl_get_fan_speed_info(struct pp_hwmgr *hwmgr, struct phm_fan_speed_info *fan_speed_info);
|
||||||
|
extern int fiji_fan_ctrl_get_fan_speed_percent(struct pp_hwmgr *hwmgr, uint32_t *speed);
|
||||||
|
extern int fiji_fan_ctrl_set_default_mode(struct pp_hwmgr *hwmgr);
|
||||||
|
extern int fiji_fan_ctrl_set_static_mode(struct pp_hwmgr *hwmgr, uint32_t mode);
|
||||||
|
extern int fiji_fan_ctrl_set_fan_speed_percent(struct pp_hwmgr *hwmgr, uint32_t speed);
|
||||||
|
extern int fiji_fan_ctrl_reset_fan_speed_to_default(struct pp_hwmgr *hwmgr);
|
||||||
|
extern int pp_fiji_thermal_initialize(struct pp_hwmgr *hwmgr);
|
||||||
|
extern int fiji_thermal_ctrl_uninitialize_thermal_controller(struct pp_hwmgr *hwmgr);
|
||||||
|
extern int fiji_fan_ctrl_set_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t speed);
|
||||||
|
extern int fiji_fan_ctrl_get_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t *speed);
|
||||||
|
extern uint32_t tonga_get_xclk(struct pp_hwmgr *hwmgr);
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
Loading…
Reference in New Issue