Input: add support for the FlySky FS-iA6B RC receiver
This patch adds support for the FlySky FS-iA6B RC receiver (serial IBUS). It allows the usage of the FlySky FS-i6 and other AFHDS compliant remote controls as a joystick input device. To use it, a patch to inputattach which adds the FS-iA6B as a 115200 baud serial device is required. I will upstream it after this patch is merged. More information about the hardware can be found here: https://notsyncing.net/?p=blog&b=2018.linux-fsia6b Signed-off-by: Markus Koch <markus@notsyncing.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This commit is contained in:
Markus Koch
Dmitry Torokhov
parent
771a081e44
commit
5d4b45a1dd
|
|
@ -12394,6 +12394,12 @@ S: Maintained
|
|||
F: Documentation/input/devices/pxrc.rst
|
||||
F: drivers/input/joystick/pxrc.c
|
||||
|
||||
FLYSKY FSIA6B RC RECEIVER
|
||||
M: Markus Koch <markus@notsyncing.net>
|
||||
L: linux-input@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/input/joystick/fsia6b.c
|
||||
|
||||
PHONET PROTOCOL
|
||||
M: Remi Denis-Courmont <courmisch@gmail.com>
|
||||
S: Supported
|
||||
|
|
|
|||
|
|
@ -362,4 +362,14 @@ config JOYSTICK_PXRC
|
|||
To compile this driver as a module, choose M here: the
|
||||
module will be called pxrc.
|
||||
|
||||
config JOYSTICK_FSIA6B
|
||||
tristate "FlySky FS-iA6B RC Receiver"
|
||||
select SERIO
|
||||
help
|
||||
Say Y here if you use a FlySky FS-i6 RC remote control along with the
|
||||
FS-iA6B RC receiver as a joystick input device.
|
||||
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called fsia6b.
|
||||
|
||||
endif
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@ obj-$(CONFIG_JOYSTICK_AS5011) += as5011.o
|
|||
obj-$(CONFIG_JOYSTICK_ANALOG) += analog.o
|
||||
obj-$(CONFIG_JOYSTICK_COBRA) += cobra.o
|
||||
obj-$(CONFIG_JOYSTICK_DB9) += db9.o
|
||||
obj-$(CONFIG_JOYSTICK_FSIA6B) += fsia6b.o
|
||||
obj-$(CONFIG_JOYSTICK_GAMECON) += gamecon.o
|
||||
obj-$(CONFIG_JOYSTICK_GF2K) += gf2k.o
|
||||
obj-$(CONFIG_JOYSTICK_GRIP) += grip.o
|
||||
|
|
@ -23,7 +24,7 @@ obj-$(CONFIG_JOYSTICK_JOYDUMP) += joydump.o
|
|||
obj-$(CONFIG_JOYSTICK_MAGELLAN) += magellan.o
|
||||
obj-$(CONFIG_JOYSTICK_MAPLE) += maplecontrol.o
|
||||
obj-$(CONFIG_JOYSTICK_PSXPAD_SPI) += psxpad-spi.o
|
||||
obj-$(CONFIG_JOYSTICK_PXRC) += pxrc.o
|
||||
obj-$(CONFIG_JOYSTICK_PXRC) += pxrc.o
|
||||
obj-$(CONFIG_JOYSTICK_SIDEWINDER) += sidewinder.o
|
||||
obj-$(CONFIG_JOYSTICK_SPACEBALL) += spaceball.o
|
||||
obj-$(CONFIG_JOYSTICK_SPACEORB) += spaceorb.o
|
||||
|
|
@ -32,7 +33,7 @@ obj-$(CONFIG_JOYSTICK_TMDC) += tmdc.o
|
|||
obj-$(CONFIG_JOYSTICK_TURBOGRAFX) += turbografx.o
|
||||
obj-$(CONFIG_JOYSTICK_TWIDJOY) += twidjoy.o
|
||||
obj-$(CONFIG_JOYSTICK_WARRIOR) += warrior.o
|
||||
obj-$(CONFIG_JOYSTICK_WALKERA0701) += walkera0701.o
|
||||
obj-$(CONFIG_JOYSTICK_XPAD) += xpad.o
|
||||
obj-$(CONFIG_JOYSTICK_ZHENHUA) += zhenhua.o
|
||||
obj-$(CONFIG_JOYSTICK_WALKERA0701) += walkera0701.o
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,231 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* FS-iA6B iBus RC receiver driver
|
||||
*
|
||||
* This driver provides all 14 channels of the FlySky FS-ia6B RC receiver
|
||||
* as analog values.
|
||||
*
|
||||
* Additionally, the channels can be converted to discrete switch values.
|
||||
* By default, it is configured for the offical FS-i6 remote control.
|
||||
* If you use a different hardware configuration, you can configure it
|
||||
* using the `switch_config` parameter.
|
||||
*/
|
||||
|
||||
#include <linux/device.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/serio.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/types.h>
|
||||
|
||||
#define DRIVER_DESC "FS-iA6B iBus RC receiver"
|
||||
|
||||
MODULE_AUTHOR("Markus Koch <markus@notsyncing.net>");
|
||||
MODULE_DESCRIPTION(DRIVER_DESC);
|
||||
MODULE_LICENSE("GPL");
|
||||
|
||||
#define IBUS_SERVO_COUNT 14
|
||||
|
||||
static char *switch_config = "00000022320000";
|
||||
module_param(switch_config, charp, 0444);
|
||||
MODULE_PARM_DESC(switch_config,
|
||||
"Amount of switch positions per channel (14 characters, 0-3)");
|
||||
|
||||
static int fsia6b_axes[IBUS_SERVO_COUNT] = {
|
||||
ABS_X, ABS_Y,
|
||||
ABS_Z, ABS_RX,
|
||||
ABS_RY, ABS_RZ,
|
||||
ABS_HAT0X, ABS_HAT0Y,
|
||||
ABS_HAT1X, ABS_HAT1Y,
|
||||
ABS_HAT2X, ABS_HAT2Y,
|
||||
ABS_HAT3X, ABS_HAT3Y
|
||||
};
|
||||
|
||||
enum ibus_state { SYNC, COLLECT, PROCESS };
|
||||
|
||||
struct ibus_packet {
|
||||
enum ibus_state state;
|
||||
|
||||
int offset;
|
||||
u16 ibuf;
|
||||
u16 channel[IBUS_SERVO_COUNT];
|
||||
};
|
||||
|
||||
struct fsia6b {
|
||||
struct input_dev *dev;
|
||||
struct ibus_packet packet;
|
||||
|
||||
char phys[32];
|
||||
};
|
||||
|
||||
static irqreturn_t fsia6b_serio_irq(struct serio *serio,
|
||||
unsigned char data, unsigned int flags)
|
||||
{
|
||||
struct fsia6b *fsia6b = serio_get_drvdata(serio);
|
||||
int i;
|
||||
int sw_state;
|
||||
int sw_id = BTN_0;
|
||||
|
||||
fsia6b->packet.ibuf = (data << 8) | ((fsia6b->packet.ibuf >> 8) & 0xFF);
|
||||
|
||||
switch (fsia6b->packet.state) {
|
||||
case SYNC:
|
||||
if (fsia6b->packet.ibuf == 0x4020)
|
||||
fsia6b->packet.state = COLLECT;
|
||||
break;
|
||||
|
||||
case COLLECT:
|
||||
fsia6b->packet.state = PROCESS;
|
||||
break;
|
||||
|
||||
case PROCESS:
|
||||
fsia6b->packet.channel[fsia6b->packet.offset] =
|
||||
fsia6b->packet.ibuf;
|
||||
fsia6b->packet.offset++;
|
||||
|
||||
if (fsia6b->packet.offset == IBUS_SERVO_COUNT) {
|
||||
fsia6b->packet.offset = 0;
|
||||
fsia6b->packet.state = SYNC;
|
||||
for (i = 0; i < IBUS_SERVO_COUNT; ++i) {
|
||||
input_report_abs(fsia6b->dev, fsia6b_axes[i],
|
||||
fsia6b->packet.channel[i]);
|
||||
|
||||
sw_state = 0;
|
||||
if (fsia6b->packet.channel[i] > 1900)
|
||||
sw_state = 1;
|
||||
else if (fsia6b->packet.channel[i] < 1100)
|
||||
sw_state = 2;
|
||||
|
||||
switch (switch_config[i]) {
|
||||
case '3':
|
||||
input_report_key(fsia6b->dev,
|
||||
sw_id++,
|
||||
sw_state == 0);
|
||||
/* fall-through */
|
||||
case '2':
|
||||
input_report_key(fsia6b->dev,
|
||||
sw_id++,
|
||||
sw_state == 1);
|
||||
/* fall-through */
|
||||
case '1':
|
||||
input_report_key(fsia6b->dev,
|
||||
sw_id++,
|
||||
sw_state == 2);
|
||||
}
|
||||
}
|
||||
input_sync(fsia6b->dev);
|
||||
} else {
|
||||
fsia6b->packet.state = COLLECT;
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int fsia6b_serio_connect(struct serio *serio, struct serio_driver *drv)
|
||||
{
|
||||
struct fsia6b *fsia6b;
|
||||
struct input_dev *input_dev;
|
||||
int err;
|
||||
int i, j;
|
||||
int sw_id = 0;
|
||||
|
||||
fsia6b = kzalloc(sizeof(*fsia6b), GFP_KERNEL);
|
||||
if (!fsia6b)
|
||||
return -ENOMEM;
|
||||
|
||||
fsia6b->packet.ibuf = 0;
|
||||
fsia6b->packet.offset = 0;
|
||||
fsia6b->packet.state = SYNC;
|
||||
|
||||
serio_set_drvdata(serio, fsia6b);
|
||||
|
||||
input_dev = input_allocate_device();
|
||||
if (!input_dev) {
|
||||
err = -ENOMEM;
|
||||
goto fail1;
|
||||
}
|
||||
fsia6b->dev = input_dev;
|
||||
|
||||
snprintf(fsia6b->phys, sizeof(fsia6b->phys), "%s/input0", serio->phys);
|
||||
|
||||
input_dev->name = DRIVER_DESC;
|
||||
input_dev->phys = fsia6b->phys;
|
||||
input_dev->id.bustype = BUS_RS232;
|
||||
input_dev->id.vendor = SERIO_FSIA6B;
|
||||
input_dev->id.product = serio->id.id;
|
||||
input_dev->id.version = 0x0100;
|
||||
input_dev->dev.parent = &serio->dev;
|
||||
|
||||
for (i = 0; i < IBUS_SERVO_COUNT; i++)
|
||||
input_set_abs_params(input_dev, fsia6b_axes[i],
|
||||
1000, 2000, 2, 2);
|
||||
|
||||
/* Register switch configuration */
|
||||
for (i = 0; i < IBUS_SERVO_COUNT; i++) {
|
||||
if (switch_config[i] < '0' || switch_config[i] > '3') {
|
||||
dev_err(&fsia6b->dev->dev,
|
||||
"Invalid switch configuration supplied for fsia6b.\n");
|
||||
err = -EINVAL;
|
||||
goto fail2;
|
||||
}
|
||||
|
||||
for (j = '1'; j <= switch_config[i]; j++) {
|
||||
input_set_capability(input_dev, EV_KEY, BTN_0 + sw_id);
|
||||
sw_id++;
|
||||
}
|
||||
}
|
||||
|
||||
err = serio_open(serio, drv);
|
||||
if (err)
|
||||
goto fail2;
|
||||
|
||||
err = input_register_device(fsia6b->dev);
|
||||
if (err)
|
||||
goto fail3;
|
||||
|
||||
return 0;
|
||||
|
||||
fail3: serio_close(serio);
|
||||
fail2: input_free_device(input_dev);
|
||||
fail1: serio_set_drvdata(serio, NULL);
|
||||
kfree(fsia6b);
|
||||
return err;
|
||||
}
|
||||
|
||||
static void fsia6b_serio_disconnect(struct serio *serio)
|
||||
{
|
||||
struct fsia6b *fsia6b = serio_get_drvdata(serio);
|
||||
|
||||
serio_close(serio);
|
||||
serio_set_drvdata(serio, NULL);
|
||||
input_unregister_device(fsia6b->dev);
|
||||
kfree(fsia6b);
|
||||
}
|
||||
|
||||
static const struct serio_device_id fsia6b_serio_ids[] = {
|
||||
{
|
||||
.type = SERIO_RS232,
|
||||
.proto = SERIO_FSIA6B,
|
||||
.id = SERIO_ANY,
|
||||
.extra = SERIO_ANY,
|
||||
},
|
||||
{ 0 }
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(serio, fsia6b_serio_ids);
|
||||
|
||||
static struct serio_driver fsia6b_serio_drv = {
|
||||
.driver = {
|
||||
.name = "fsia6b"
|
||||
},
|
||||
.description = DRIVER_DESC,
|
||||
.id_table = fsia6b_serio_ids,
|
||||
.interrupt = fsia6b_serio_irq,
|
||||
.connect = fsia6b_serio_connect,
|
||||
.disconnect = fsia6b_serio_disconnect
|
||||
};
|
||||
|
||||
module_serio_driver(fsia6b_serio_drv)
|
||||
|
|
@ -82,5 +82,6 @@
|
|||
#define SERIO_EGALAX 0x3f
|
||||
#define SERIO_PULSE8_CEC 0x40
|
||||
#define SERIO_RAINSHADOW_CEC 0x41
|
||||
#define SERIO_FSIA6B 0x42
|
||||
|
||||
#endif /* _UAPI_SERIO_H */
|
||||
|
|
|
|||
Loading…
Reference in New Issue