diff --git a/Documentation/devicetree/bindings/soc/bcm/raspberrypi,bcm2835-power.txt b/Documentation/devicetree/bindings/soc/bcm/raspberrypi,bcm2835-power.txt new file mode 100644 index 000000000000..30942cf7992b --- /dev/null +++ b/Documentation/devicetree/bindings/soc/bcm/raspberrypi,bcm2835-power.txt @@ -0,0 +1,47 @@ +Raspberry Pi power domain driver + +Required properties: + +- compatible: Should be "raspberrypi,bcm2835-power". +- firmware: Reference to the RPi firmware device node. +- #power-domain-cells: Should be <1>, we providing multiple power domains. + +The valid defines for power domain are: + + RPI_POWER_DOMAIN_I2C0 + RPI_POWER_DOMAIN_I2C1 + RPI_POWER_DOMAIN_I2C2 + RPI_POWER_DOMAIN_VIDEO_SCALER + RPI_POWER_DOMAIN_VPU1 + RPI_POWER_DOMAIN_HDMI + RPI_POWER_DOMAIN_USB + RPI_POWER_DOMAIN_VEC + RPI_POWER_DOMAIN_JPEG + RPI_POWER_DOMAIN_H264 + RPI_POWER_DOMAIN_V3D + RPI_POWER_DOMAIN_ISP + RPI_POWER_DOMAIN_UNICAM0 + RPI_POWER_DOMAIN_UNICAM1 + RPI_POWER_DOMAIN_CCP2RX + RPI_POWER_DOMAIN_CSI2 + RPI_POWER_DOMAIN_CPI + RPI_POWER_DOMAIN_DSI0 + RPI_POWER_DOMAIN_DSI1 + RPI_POWER_DOMAIN_TRANSPOSER + RPI_POWER_DOMAIN_CCP2TX + RPI_POWER_DOMAIN_CDP + RPI_POWER_DOMAIN_ARM + +Example: + +power: power { + compatible = "raspberrypi,bcm2835-power"; + firmware = <&firmware>; + #power-domain-cells = <1>; +}; + +Example for using power domain: + +&usb { + power-domains = <&power RPI_POWER_DOMAIN_USB>; +}; diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig index 4e853ed2c82b..844142620031 100644 --- a/drivers/soc/Kconfig +++ b/drivers/soc/Kconfig @@ -1,5 +1,6 @@ menu "SOC (System On Chip) specific Drivers" +source "drivers/soc/bcm/Kconfig" source "drivers/soc/brcmstb/Kconfig" source "drivers/soc/mediatek/Kconfig" source "drivers/soc/qcom/Kconfig" diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile index f2ba2e932ae1..f3f955cdb04b 100644 --- a/drivers/soc/Makefile +++ b/drivers/soc/Makefile @@ -2,6 +2,7 @@ # Makefile for the Linux Kernel SOC specific device drivers. # +obj-y += bcm/ obj-$(CONFIG_SOC_BRCMSTB) += brcmstb/ obj-$(CONFIG_MACH_DOVE) += dove/ obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/ diff --git a/drivers/soc/bcm/Kconfig b/drivers/soc/bcm/Kconfig new file mode 100644 index 000000000000..5ba1827fe36f --- /dev/null +++ b/drivers/soc/bcm/Kconfig @@ -0,0 +1,9 @@ +config RASPBERRYPI_POWER + bool "Raspberry Pi power domain driver" + depends on ARCH_BCM2835 || COMPILE_TEST + depends on RASPBERRYPI_FIRMWARE + select PM_GENERIC_DOMAINS if PM + select PM_GENERIC_DOMAINS_OF if PM + help + This enables support for the RPi power domains which can be enabled + or disabled via the RPi firmware. diff --git a/drivers/soc/bcm/Makefile b/drivers/soc/bcm/Makefile new file mode 100644 index 000000000000..63aa3eb23087 --- /dev/null +++ b/drivers/soc/bcm/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_RASPBERRYPI_POWER) += raspberrypi-power.o diff --git a/drivers/soc/bcm/raspberrypi-power.c b/drivers/soc/bcm/raspberrypi-power.c new file mode 100644 index 000000000000..fe96a8b956fb --- /dev/null +++ b/drivers/soc/bcm/raspberrypi-power.c @@ -0,0 +1,247 @@ +/* (C) 2015 Pengutronix, Alexander Aring + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Authors: + * Alexander Aring + * Eric Anholt + */ + +#include +#include +#include +#include +#include +#include + +/* + * Firmware indices for the old power domains interface. Only a few + * of them were actually implemented. + */ +#define RPI_OLD_POWER_DOMAIN_USB 3 +#define RPI_OLD_POWER_DOMAIN_V3D 10 + +struct rpi_power_domain { + u32 domain; + bool enabled; + bool old_interface; + struct generic_pm_domain base; + struct rpi_firmware *fw; +}; + +struct rpi_power_domains { + bool has_new_interface; + struct genpd_onecell_data xlate; + struct rpi_firmware *fw; + struct rpi_power_domain domains[RPI_POWER_DOMAIN_COUNT]; +}; + +/* + * Packet definition used by RPI_FIRMWARE_SET_POWER_STATE and + * RPI_FIRMWARE_SET_DOMAIN_STATE + */ +struct rpi_power_domain_packet { + u32 domain; + u32 on; +} __packet; + +/* + * Asks the firmware to enable or disable power on a specific power + * domain. + */ +static int rpi_firmware_set_power(struct rpi_power_domain *rpi_domain, bool on) +{ + struct rpi_power_domain_packet packet; + + packet.domain = rpi_domain->domain; + packet.on = on; + return rpi_firmware_property(rpi_domain->fw, + rpi_domain->old_interface ? + RPI_FIRMWARE_SET_POWER_STATE : + RPI_FIRMWARE_SET_DOMAIN_STATE, + &packet, sizeof(packet)); +} + +static int rpi_domain_off(struct generic_pm_domain *domain) +{ + struct rpi_power_domain *rpi_domain = + container_of(domain, struct rpi_power_domain, base); + + return rpi_firmware_set_power(rpi_domain, false); +} + +static int rpi_domain_on(struct generic_pm_domain *domain) +{ + struct rpi_power_domain *rpi_domain = + container_of(domain, struct rpi_power_domain, base); + + return rpi_firmware_set_power(rpi_domain, true); +} + +static void rpi_common_init_power_domain(struct rpi_power_domains *rpi_domains, + int xlate_index, const char *name) +{ + struct rpi_power_domain *dom = &rpi_domains->domains[xlate_index]; + + dom->fw = rpi_domains->fw; + + dom->base.name = name; + dom->base.power_on = rpi_domain_on; + dom->base.power_off = rpi_domain_off; + + /* + * Treat all power domains as off at boot. + * + * The firmware itself may be keeping some domains on, but + * from Linux's perspective all we control is the refcounts + * that we give to the firmware, and we can't ask the firmware + * to turn off something that we haven't ourselves turned on. + */ + pm_genpd_init(&dom->base, NULL, true); + + rpi_domains->xlate.domains[xlate_index] = &dom->base; +} + +static void rpi_init_power_domain(struct rpi_power_domains *rpi_domains, + int xlate_index, const char *name) +{ + struct rpi_power_domain *dom = &rpi_domains->domains[xlate_index]; + + if (!rpi_domains->has_new_interface) + return; + + /* The DT binding index is the firmware's domain index minus one. */ + dom->domain = xlate_index + 1; + + rpi_common_init_power_domain(rpi_domains, xlate_index, name); +} + +static void rpi_init_old_power_domain(struct rpi_power_domains *rpi_domains, + int xlate_index, int domain, + const char *name) +{ + struct rpi_power_domain *dom = &rpi_domains->domains[xlate_index]; + + dom->old_interface = true; + dom->domain = domain; + + rpi_common_init_power_domain(rpi_domains, xlate_index, name); +} + +/* + * Detects whether the firmware supports the new power domains interface. + * + * The firmware doesn't actually return an error on an unknown tag, + * and just skips over it, so we do the detection by putting an + * unexpected value in the return field and checking if it was + * unchanged. + */ +static bool +rpi_has_new_domain_support(struct rpi_power_domains *rpi_domains) +{ + struct rpi_power_domain_packet packet; + int ret; + + packet.domain = RPI_POWER_DOMAIN_ARM; + packet.on = ~0; + + ret = rpi_firmware_property(rpi_domains->fw, + RPI_FIRMWARE_GET_DOMAIN_STATE, + &packet, sizeof(packet)); + + return ret == 0 && packet.on != ~0; +} + +static int rpi_power_probe(struct platform_device *pdev) +{ + struct device_node *fw_np; + struct device *dev = &pdev->dev; + struct rpi_power_domains *rpi_domains; + + rpi_domains = devm_kzalloc(dev, sizeof(*rpi_domains), GFP_KERNEL); + if (!rpi_domains) + return -ENOMEM; + + rpi_domains->xlate.domains = + devm_kzalloc(dev, sizeof(*rpi_domains->xlate.domains) * + RPI_POWER_DOMAIN_COUNT, GFP_KERNEL); + if (!rpi_domains->xlate.domains) + return -ENOMEM; + + rpi_domains->xlate.num_domains = RPI_POWER_DOMAIN_COUNT; + + fw_np = of_parse_phandle(pdev->dev.of_node, "firmware", 0); + if (!fw_np) { + dev_err(&pdev->dev, "no firmware node\n"); + return -ENODEV; + } + + rpi_domains->fw = rpi_firmware_get(fw_np); + of_node_put(fw_np); + if (!rpi_domains->fw) + return -EPROBE_DEFER; + + rpi_domains->has_new_interface = + rpi_has_new_domain_support(rpi_domains); + + rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_I2C0, "I2C0"); + rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_I2C1, "I2C1"); + rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_I2C2, "I2C2"); + rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_VIDEO_SCALER, + "VIDEO_SCALER"); + rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_VPU1, "VPU1"); + rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_HDMI, "HDMI"); + + /* + * Use the old firmware interface for USB power, so that we + * can turn it on even if the firmware hasn't been updated. + */ + rpi_init_old_power_domain(rpi_domains, RPI_POWER_DOMAIN_USB, + RPI_OLD_POWER_DOMAIN_USB, "USB"); + + rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_VEC, "VEC"); + rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_JPEG, "JPEG"); + rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_H264, "H264"); + rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_V3D, "V3D"); + rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_ISP, "ISP"); + rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_UNICAM0, "UNICAM0"); + rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_UNICAM1, "UNICAM1"); + rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CCP2RX, "CCP2RX"); + rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CSI2, "CSI2"); + rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CPI, "CPI"); + rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_DSI0, "DSI0"); + rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_DSI1, "DSI1"); + rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_TRANSPOSER, + "TRANSPOSER"); + rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CCP2TX, "CCP2TX"); + rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CDP, "CDP"); + rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_ARM, "ARM"); + + of_genpd_add_provider_onecell(dev->of_node, &rpi_domains->xlate); + + platform_set_drvdata(pdev, rpi_domains); + + return 0; +} + +static const struct of_device_id rpi_power_of_match[] = { + { .compatible = "raspberrypi,bcm2835-power", }, + {}, +}; +MODULE_DEVICE_TABLE(of, rpi_power_of_match); + +static struct platform_driver rpi_power_driver = { + .driver = { + .name = "raspberrypi-power", + .of_match_table = rpi_power_of_match, + }, + .probe = rpi_power_probe, +}; +builtin_platform_driver(rpi_power_driver); + +MODULE_AUTHOR("Alexander Aring "); +MODULE_AUTHOR("Eric Anholt "); +MODULE_DESCRIPTION("Raspberry Pi power domain driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/dt-bindings/power/raspberrypi-power.h b/include/dt-bindings/power/raspberrypi-power.h new file mode 100644 index 000000000000..b3ff8e09a78f --- /dev/null +++ b/include/dt-bindings/power/raspberrypi-power.h @@ -0,0 +1,41 @@ +/* + * Copyright © 2015 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _DT_BINDINGS_ARM_BCM2835_RPI_POWER_H +#define _DT_BINDINGS_ARM_BCM2835_RPI_POWER_H + +/* These power domain indices are the firmware interface's indices + * minus one. + */ +#define RPI_POWER_DOMAIN_I2C0 0 +#define RPI_POWER_DOMAIN_I2C1 1 +#define RPI_POWER_DOMAIN_I2C2 2 +#define RPI_POWER_DOMAIN_VIDEO_SCALER 3 +#define RPI_POWER_DOMAIN_VPU1 4 +#define RPI_POWER_DOMAIN_HDMI 5 +#define RPI_POWER_DOMAIN_USB 6 +#define RPI_POWER_DOMAIN_VEC 7 +#define RPI_POWER_DOMAIN_JPEG 8 +#define RPI_POWER_DOMAIN_H264 9 +#define RPI_POWER_DOMAIN_V3D 10 +#define RPI_POWER_DOMAIN_ISP 11 +#define RPI_POWER_DOMAIN_UNICAM0 12 +#define RPI_POWER_DOMAIN_UNICAM1 13 +#define RPI_POWER_DOMAIN_CCP2RX 14 +#define RPI_POWER_DOMAIN_CSI2 15 +#define RPI_POWER_DOMAIN_CPI 16 +#define RPI_POWER_DOMAIN_DSI0 17 +#define RPI_POWER_DOMAIN_DSI1 18 +#define RPI_POWER_DOMAIN_TRANSPOSER 19 +#define RPI_POWER_DOMAIN_CCP2TX 20 +#define RPI_POWER_DOMAIN_CDP 21 +#define RPI_POWER_DOMAIN_ARM 22 + +#define RPI_POWER_DOMAIN_COUNT 23 + +#endif /* _DT_BINDINGS_ARM_BCM2835_RPI_POWER_H */ diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h index c07d74aa39bf..3fb357193f09 100644 --- a/include/soc/bcm2835/raspberrypi-firmware.h +++ b/include/soc/bcm2835/raspberrypi-firmware.h @@ -72,10 +72,12 @@ enum rpi_firmware_property_tag { RPI_FIRMWARE_SET_ENABLE_QPU = 0x00030012, RPI_FIRMWARE_GET_DISPMANX_RESOURCE_MEM_HANDLE = 0x00030014, RPI_FIRMWARE_GET_EDID_BLOCK = 0x00030020, + RPI_FIRMWARE_GET_DOMAIN_STATE = 0x00030030, RPI_FIRMWARE_SET_CLOCK_STATE = 0x00038001, RPI_FIRMWARE_SET_CLOCK_RATE = 0x00038002, RPI_FIRMWARE_SET_VOLTAGE = 0x00038003, RPI_FIRMWARE_SET_TURBO = 0x00038009, + RPI_FIRMWARE_SET_DOMAIN_STATE = 0x00038030, /* Dispmanx TAGS */ RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE = 0x00040001,