serial: stm32: Clear prev values before setting RTS delays
The code lacks clearing of previous DEAT/DEDT values. Thus, changing
values on the fly results in garbage delays tending towards the maximum
value as more and more bits are ORed together. (Leaving RS485 mode
would have cleared the old values though).
Fixes: 1bcda09d29
("serial: stm32: add support for RS485 hardware control mode")
Cc: stable <stable@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220627150753.34510-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
parent
ec5ad33168
commit
5c5f44e362
|
@ -72,6 +72,8 @@ static void stm32_usart_config_reg_rs485(u32 *cr1, u32 *cr3, u32 delay_ADE,
|
|||
*cr3 |= USART_CR3_DEM;
|
||||
over8 = *cr1 & USART_CR1_OVER8;
|
||||
|
||||
*cr1 &= ~(USART_CR1_DEDT_MASK | USART_CR1_DEAT_MASK);
|
||||
|
||||
if (over8)
|
||||
rs485_deat_dedt = delay_ADE * baud * 8;
|
||||
else
|
||||
|
|
Loading…
Reference in New Issue