ASoC: fsl_esai: Wrap some operations to be functions
Extract the operation to be functions, to improve the readability. In this patch, fsl_esai_hw_init, fsl_esai_register_restore, fsl_esai_trigger_start and fsl_esai_trigger_stop are extracted. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/804d7e75ae7e06a913479912b578b3538ca7cd3f.1562842206.git.shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Shengjiu Wang
Mark Brown
parent
4dc057a786
commit
5be6155b50
|
|
@ -35,6 +35,7 @@
|
|||
* @fifo_depth: depth of tx/rx FIFO
|
||||
* @slot_width: width of each DAI slot
|
||||
* @slots: number of slots
|
||||
* @channels: channel num for tx or rx
|
||||
* @hck_rate: clock rate of desired HCKx clock
|
||||
* @sck_rate: clock rate of desired SCKx clock
|
||||
* @hck_dir: the direction of HCKx pads
|
||||
|
|
@ -57,6 +58,7 @@ struct fsl_esai {
|
|||
u32 slots;
|
||||
u32 tx_mask;
|
||||
u32 rx_mask;
|
||||
u32 channels[2];
|
||||
u32 hck_rate[2];
|
||||
u32 sck_rate[2];
|
||||
bool hck_dir[2];
|
||||
|
|
@ -543,64 +545,132 @@ static int fsl_esai_hw_params(struct snd_pcm_substream *substream,
|
|||
return 0;
|
||||
}
|
||||
|
||||
static int fsl_esai_hw_init(struct fsl_esai *esai_priv)
|
||||
{
|
||||
struct platform_device *pdev = esai_priv->pdev;
|
||||
int ret;
|
||||
|
||||
/* Reset ESAI unit */
|
||||
ret = regmap_update_bits(esai_priv->regmap, REG_ESAI_ECR,
|
||||
ESAI_ECR_ESAIEN_MASK | ESAI_ECR_ERST_MASK,
|
||||
ESAI_ECR_ESAIEN | ESAI_ECR_ERST);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "failed to reset ESAI: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/*
|
||||
* We need to enable ESAI so as to access some of its registers.
|
||||
* Otherwise, we would fail to dump regmap from user space.
|
||||
*/
|
||||
ret = regmap_update_bits(esai_priv->regmap, REG_ESAI_ECR,
|
||||
ESAI_ECR_ESAIEN_MASK | ESAI_ECR_ERST_MASK,
|
||||
ESAI_ECR_ESAIEN);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "failed to enable ESAI: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
regmap_update_bits(esai_priv->regmap, REG_ESAI_PRRC,
|
||||
ESAI_PRRC_PDC_MASK, 0);
|
||||
regmap_update_bits(esai_priv->regmap, REG_ESAI_PCRC,
|
||||
ESAI_PCRC_PC_MASK, 0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int fsl_esai_register_restore(struct fsl_esai *esai_priv)
|
||||
{
|
||||
int ret;
|
||||
|
||||
/* FIFO reset for safety */
|
||||
regmap_update_bits(esai_priv->regmap, REG_ESAI_TFCR,
|
||||
ESAI_xFCR_xFR, ESAI_xFCR_xFR);
|
||||
regmap_update_bits(esai_priv->regmap, REG_ESAI_RFCR,
|
||||
ESAI_xFCR_xFR, ESAI_xFCR_xFR);
|
||||
|
||||
regcache_mark_dirty(esai_priv->regmap);
|
||||
ret = regcache_sync(esai_priv->regmap);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
/* FIFO reset done */
|
||||
regmap_update_bits(esai_priv->regmap, REG_ESAI_TFCR, ESAI_xFCR_xFR, 0);
|
||||
regmap_update_bits(esai_priv->regmap, REG_ESAI_RFCR, ESAI_xFCR_xFR, 0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void fsl_esai_trigger_start(struct fsl_esai *esai_priv, bool tx)
|
||||
{
|
||||
u8 i, channels = esai_priv->channels[tx];
|
||||
u32 pins = DIV_ROUND_UP(channels, esai_priv->slots);
|
||||
u32 mask;
|
||||
|
||||
regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx),
|
||||
ESAI_xFCR_xFEN_MASK, ESAI_xFCR_xFEN);
|
||||
|
||||
/* Write initial words reqiured by ESAI as normal procedure */
|
||||
for (i = 0; tx && i < channels; i++)
|
||||
regmap_write(esai_priv->regmap, REG_ESAI_ETDR, 0x0);
|
||||
|
||||
/*
|
||||
* When set the TE/RE in the end of enablement flow, there
|
||||
* will be channel swap issue for multi data line case.
|
||||
* In order to workaround this issue, we switch the bit
|
||||
* enablement sequence to below sequence
|
||||
* 1) clear the xSMB & xSMA: which is done in probe and
|
||||
* stop state.
|
||||
* 2) set TE/RE
|
||||
* 3) set xSMB
|
||||
* 4) set xSMA: xSMA is the last one in this flow, which
|
||||
* will trigger esai to start.
|
||||
*/
|
||||
regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx),
|
||||
tx ? ESAI_xCR_TE_MASK : ESAI_xCR_RE_MASK,
|
||||
tx ? ESAI_xCR_TE(pins) : ESAI_xCR_RE(pins));
|
||||
mask = tx ? esai_priv->tx_mask : esai_priv->rx_mask;
|
||||
|
||||
regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMB(tx),
|
||||
ESAI_xSMB_xS_MASK, ESAI_xSMB_xS(mask));
|
||||
regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMA(tx),
|
||||
ESAI_xSMA_xS_MASK, ESAI_xSMA_xS(mask));
|
||||
}
|
||||
|
||||
static void fsl_esai_trigger_stop(struct fsl_esai *esai_priv, bool tx)
|
||||
{
|
||||
regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx),
|
||||
tx ? ESAI_xCR_TE_MASK : ESAI_xCR_RE_MASK, 0);
|
||||
regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMA(tx),
|
||||
ESAI_xSMA_xS_MASK, 0);
|
||||
regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMB(tx),
|
||||
ESAI_xSMB_xS_MASK, 0);
|
||||
|
||||
/* Disable and reset FIFO */
|
||||
regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx),
|
||||
ESAI_xFCR_xFR | ESAI_xFCR_xFEN, ESAI_xFCR_xFR);
|
||||
regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx),
|
||||
ESAI_xFCR_xFR, 0);
|
||||
}
|
||||
|
||||
static int fsl_esai_trigger(struct snd_pcm_substream *substream, int cmd,
|
||||
struct snd_soc_dai *dai)
|
||||
{
|
||||
struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai);
|
||||
bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
|
||||
u8 i, channels = substream->runtime->channels;
|
||||
u32 pins = DIV_ROUND_UP(channels, esai_priv->slots);
|
||||
u32 mask;
|
||||
|
||||
esai_priv->channels[tx] = substream->runtime->channels;
|
||||
|
||||
switch (cmd) {
|
||||
case SNDRV_PCM_TRIGGER_START:
|
||||
case SNDRV_PCM_TRIGGER_RESUME:
|
||||
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
||||
regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx),
|
||||
ESAI_xFCR_xFEN_MASK, ESAI_xFCR_xFEN);
|
||||
|
||||
/* Write initial words reqiured by ESAI as normal procedure */
|
||||
for (i = 0; tx && i < channels; i++)
|
||||
regmap_write(esai_priv->regmap, REG_ESAI_ETDR, 0x0);
|
||||
|
||||
/*
|
||||
* When set the TE/RE in the end of enablement flow, there
|
||||
* will be channel swap issue for multi data line case.
|
||||
* In order to workaround this issue, we switch the bit
|
||||
* enablement sequence to below sequence
|
||||
* 1) clear the xSMB & xSMA: which is done in probe and
|
||||
* stop state.
|
||||
* 2) set TE/RE
|
||||
* 3) set xSMB
|
||||
* 4) set xSMA: xSMA is the last one in this flow, which
|
||||
* will trigger esai to start.
|
||||
*/
|
||||
regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx),
|
||||
tx ? ESAI_xCR_TE_MASK : ESAI_xCR_RE_MASK,
|
||||
tx ? ESAI_xCR_TE(pins) : ESAI_xCR_RE(pins));
|
||||
mask = tx ? esai_priv->tx_mask : esai_priv->rx_mask;
|
||||
|
||||
regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMB(tx),
|
||||
ESAI_xSMB_xS_MASK, ESAI_xSMB_xS(mask));
|
||||
regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMA(tx),
|
||||
ESAI_xSMA_xS_MASK, ESAI_xSMA_xS(mask));
|
||||
|
||||
fsl_esai_trigger_start(esai_priv, tx);
|
||||
break;
|
||||
case SNDRV_PCM_TRIGGER_SUSPEND:
|
||||
case SNDRV_PCM_TRIGGER_STOP:
|
||||
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
||||
regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx),
|
||||
tx ? ESAI_xCR_TE_MASK : ESAI_xCR_RE_MASK, 0);
|
||||
regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMA(tx),
|
||||
ESAI_xSMA_xS_MASK, 0);
|
||||
regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMB(tx),
|
||||
ESAI_xSMB_xS_MASK, 0);
|
||||
|
||||
/* Disable and reset FIFO */
|
||||
regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx),
|
||||
ESAI_xFCR_xFR | ESAI_xFCR_xFEN, ESAI_xFCR_xFR);
|
||||
regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx),
|
||||
ESAI_xFCR_xFR, 0);
|
||||
fsl_esai_trigger_stop(esai_priv, tx);
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
|
|
@ -866,22 +936,9 @@ static int fsl_esai_probe(struct platform_device *pdev)
|
|||
|
||||
dev_set_drvdata(&pdev->dev, esai_priv);
|
||||
|
||||
/* Reset ESAI unit */
|
||||
ret = regmap_write(esai_priv->regmap, REG_ESAI_ECR, ESAI_ECR_ERST);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "failed to reset ESAI: %d\n", ret);
|
||||
ret = fsl_esai_hw_init(esai_priv);
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
|
||||
/*
|
||||
* We need to enable ESAI so as to access some of its registers.
|
||||
* Otherwise, we would fail to dump regmap from user space.
|
||||
*/
|
||||
ret = regmap_write(esai_priv->regmap, REG_ESAI_ECR, ESAI_ECR_ESAIEN);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "failed to enable ESAI: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
esai_priv->tx_mask = 0xFFFFFFFF;
|
||||
esai_priv->rx_mask = 0xFFFFFFFF;
|
||||
|
|
@ -955,20 +1012,10 @@ static int fsl_esai_runtime_resume(struct device *dev)
|
|||
|
||||
regcache_cache_only(esai->regmap, false);
|
||||
|
||||
/* FIFO reset for safety */
|
||||
regmap_update_bits(esai->regmap, REG_ESAI_TFCR,
|
||||
ESAI_xFCR_xFR, ESAI_xFCR_xFR);
|
||||
regmap_update_bits(esai->regmap, REG_ESAI_RFCR,
|
||||
ESAI_xFCR_xFR, ESAI_xFCR_xFR);
|
||||
|
||||
ret = regcache_sync(esai->regmap);
|
||||
ret = fsl_esai_register_restore(esai);
|
||||
if (ret)
|
||||
goto err_regcache_sync;
|
||||
|
||||
/* FIFO reset done */
|
||||
regmap_update_bits(esai->regmap, REG_ESAI_TFCR, ESAI_xFCR_xFR, 0);
|
||||
regmap_update_bits(esai->regmap, REG_ESAI_RFCR, ESAI_xFCR_xFR, 0);
|
||||
|
||||
return 0;
|
||||
|
||||
err_regcache_sync:
|
||||
|
|
@ -991,7 +1038,6 @@ static int fsl_esai_runtime_suspend(struct device *dev)
|
|||
struct fsl_esai *esai = dev_get_drvdata(dev);
|
||||
|
||||
regcache_cache_only(esai->regmap, true);
|
||||
regcache_mark_dirty(esai->regmap);
|
||||
|
||||
if (!IS_ERR(esai->fsysclk))
|
||||
clk_disable_unprepare(esai->fsysclk);
|
||||
|
|
|
|||
Loading…
Reference in New Issue