Staging: winbond: wbhal_s.h Coding style fixes.

I fixed checkpatch warnings except some long lines and typedefs.
I also removed versioning comments.

Signed-off-by: Lars Lindley <lindley@coyote.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Lars Lindley 2010-03-28 21:52:37 +02:00 committed by Greg Kroah-Hartman
parent b66e65e2fe
commit 5a7df3c449
1 changed files with 235 additions and 253 deletions

View File

@ -4,179 +4,166 @@
#include <linux/types.h>
#include <linux/if_ether.h> /* for ETH_ALEN */
//[20040722 WK]
#define HAL_LED_SET_MASK 0x001c //20060901 Extend
#define HAL_LED_SET_SHIFT 2
#define HAL_LED_SET_MASK 0x001c
#define HAL_LED_SET_SHIFT 2
//supported RF type
/* supported RF type */
#define RF_MAXIM_2825 0
#define RF_MAXIM_2827 1
#define RF_MAXIM_2828 2
#define RF_MAXIM_2829 3
#define RF_MAXIM_V1 15
#define RF_MAXIM_V1 15
#define RF_AIROHA_2230 16
#define RF_AIROHA_7230 17
#define RF_AIROHA_2230S 18 // 20060420 Add this
// #define RF_RFMD_2959 32 // 20060626 Remove all about RFMD
#define RF_WB_242 33
#define RF_WB_242_1 34 // 20060619.5 Add
#define RF_AIROHA_2230S 18
#define RF_WB_242 33
#define RF_WB_242_1 34
#define RF_DECIDE_BY_INF 255
//----------------------------------------------------------------
// The follow define connect to upper layer
// User must modify for connection between HAL and upper layer
//----------------------------------------------------------------
/*
* ----------------------------------------------------------------
* The follow define connect to upper layer
* User must modify for connection between HAL and upper layer
* ----------------------------------------------------------------
*/
/*
* ==============================
* Common define
* ==============================
*/
/* Bit 5 */
#define HAL_USB_MODE_BURST(_H) (_H->SoftwareSet & 0x20)
/* Scan interval */
#define SCAN_MAX_CHNL_TIME (50)
/////////////////////////////////////////////////////////////////////////////////////////////////////
//================================================================================================
// Common define
//================================================================================================
#define HAL_USB_MODE_BURST( _H ) (_H->SoftwareSet & 0x20 ) // Bit 5 20060901 Modify
// Scan interval
#define SCAN_MAX_CHNL_TIME (50)
// For TxL2 Frame typr recognise
/* For TxL2 Frame typr recognise */
#define FRAME_TYPE_802_3_DATA 0
#define FRAME_TYPE_802_11_MANAGEMENT 1
#define FRAME_TYPE_802_11_MANAGEMENT_CHALLENGE 2
#define FRAME_TYPE_802_11_MANAGEMENT_CHALLENGE 2
#define FRAME_TYPE_802_11_CONTROL 3
#define FRAME_TYPE_802_11_DATA 4
#define FRAME_TYPE_PROMISCUOUS 5
// The follow definition is used for convert the frame--------------------
#define DOT_11_SEQUENCE_OFFSET 22 //Sequence control offset
/* The follow definition is used for convert the frame------------ */
#define DOT_11_SEQUENCE_OFFSET 22 /* Sequence control offset */
#define DOT_3_TYPE_OFFSET 12
#define DOT_11_MAC_HEADER_SIZE 24
#define DOT_11_MAC_HEADER_SIZE 24
#define DOT_11_SNAP_SIZE 6
#define DOT_11_TYPE_OFFSET 30 //The start offset of 802.11 Frame. Type encapsulatuin.
#define DOT_11_TYPE_OFFSET 30 /* The start offset of 802.11 Frame. Type encapsulation. */
#define DEFAULT_SIFSTIME 10
#define DEFAULT_FRAGMENT_THRESHOLD 2346 // No fragment
#define DEFAULT_FRAGMENT_THRESHOLD 2346 /* No fragment */
#define DEFAULT_MSDU_LIFE_TIME 0xffff
#define LONG_PREAMBLE_PLUS_PLCPHEADER_TIME (144+48)
#define SHORT_PREAMBLE_PLUS_PLCPHEADER_TIME (72+24)
#define PREAMBLE_PLUS_SIGNAL_PLUS_SIGNALEXTENSION (16+4+6)
#define Tsym 4
#define LONG_PREAMBLE_PLUS_PLCPHEADER_TIME (144 + 48)
#define SHORT_PREAMBLE_PLUS_PLCPHEADER_TIME (72 + 24)
#define PREAMBLE_PLUS_SIGNAL_PLUS_SIGNALEXTENSION (16 + 4 + 6)
#define Tsym 4
// Frame Type of Bits (2, 3)---------------------------------------------
/* Frame Type of Bits (2, 3)----------------------------------- */
#define MAC_TYPE_MANAGEMENT 0x00
#define MAC_TYPE_CONTROL 0x04
#define MAC_TYPE_DATA 0x08
#define MASK_FRAGMENT_NUMBER 0x000F
#define SEQUENCE_NUMBER_SHIFT 4
#define MASK_FRAGMENT_NUMBER 0x000F
#define SEQUENCE_NUMBER_SHIFT 4
#define HAL_WOL_TYPE_WAKEUP_FRAME 0x01
#define HAL_WOL_TYPE_MAGIC_PACKET 0x02
// 20040106 ADDED
#define HAL_KEYTYPE_WEP40 0
#define HAL_KEYTYPE_WEP104 1
#define HAL_KEYTYPE_TKIP 2 // 128 bit key
#define HAL_KEYTYPE_AES_CCMP 3 // 128 bit key
#define HAL_KEYTYPE_WEP40 0
#define HAL_KEYTYPE_WEP104 1
#define HAL_KEYTYPE_TKIP 2 /* 128 bit key */
#define HAL_KEYTYPE_AES_CCMP 3 /* 128 bit key */
// For VM state
/* For VM state */
enum {
VM_STOP = 0,
VM_RUNNING,
VM_COMPLETED
};
//-----------------------------------------------------
// Normal Key table format
//-----------------------------------------------------
// The order of KEY index is MAPPING_KEY_START_INDEX > GROUP_KEY_START_INDEX
#define MAX_KEY_TABLE 24 // 24 entry for storing key data
/*
* ================================
* Normal Key table format
* ================================
*/
/* The order of KEY index is MAPPING_KEY_START_INDEX > GROUP_KEY_START_INDEX */
#define MAX_KEY_TABLE 24 /* 24 entry for storing key data */
#define GROUP_KEY_START_INDEX 4
#define MAPPING_KEY_START_INDEX 8
//--------------------------------------------------------
// Descriptor
//--------------------------------------------------------
#define MAX_DESCRIPTOR_BUFFER_INDEX 8 // Have to multiple of 2
//#define FLAG_ERROR_TX_MASK cpu_to_le32(0x000000bf) //20061009 marked by anson's endian
#define FLAG_ERROR_TX_MASK 0x000000bf //20061009 anson's endian
//#define FLAG_ERROR_RX_MASK 0x00000c3f
//#define FLAG_ERROR_RX_MASK cpu_to_le32(0x0000083f) //20061009 marked by anson's endian
//Don't care replay error,
//it is handled by S/W
#define FLAG_ERROR_RX_MASK 0x0000083f //20060926 anson's endian
/*
* =========================================
* Descriptor
* =========================================
*/
#define MAX_DESCRIPTOR_BUFFER_INDEX 8 /* Have to multiple of 2 */
#define FLAG_ERROR_TX_MASK 0x000000bf
#define FLAG_ERROR_RX_MASK 0x0000083f
#define FLAG_BAND_RX_MASK 0x10000000 //Bit 28
#define FLAG_BAND_RX_MASK 0x10000000 /* Bit 28 */
typedef struct _R00_DESCRIPTOR
{
union
{
typedef struct _R00_DESCRIPTOR {
union {
u32 value;
#ifdef _BIG_ENDIAN_ //20060926 anson's endian
struct
{
#ifdef _BIG_ENDIAN_
struct {
u32 R00_packet_or_buffer_status:1;
u32 R00_packet_in_fifo:1;
u32 R00_RESERVED:2;
u32 R00_receive_byte_count:12;
u32 R00_receive_time_index:16;
};
#else
struct
{
#else
struct {
u32 R00_receive_time_index:16;
u32 R00_receive_byte_count:12;
u32 R00_RESERVED:2;
u32 R00_packet_in_fifo:1;
u32 R00_packet_or_buffer_status:1;
};
#endif
#endif
};
} R00_DESCRIPTOR, *PR00_DESCRIPTOR;
typedef struct _T00_DESCRIPTOR
{
union
{
typedef struct _T00_DESCRIPTOR {
union {
u32 value;
#ifdef _BIG_ENDIAN_ //20061009 anson's endian
struct
{
u32 T00_first_mpdu:1; // for hardware use
u32 T00_last_mpdu:1; // for hardware use
u32 T00_IsLastMpdu:1;// 0: not 1:Yes for software used
u32 T00_IgnoreResult:1;// The same mechanism with T00 setting. 050111 Modify for TS
u32 T00_RESERVED_ID:2;//3 bit ID reserved
u32 T00_tx_packet_id:4;//930519.4.e 930810.3.c
#ifdef _BIG_ENDIAN_
struct {
u32 T00_first_mpdu:1; /* for hardware use */
u32 T00_last_mpdu:1; /* for hardware use */
u32 T00_IsLastMpdu:1;/* 0:not 1:Yes for software used */
u32 T00_IgnoreResult:1;/* The same mechanism with T00 setting. */
u32 T00_RESERVED_ID:2;/* 3 bit ID reserved */
u32 T00_tx_packet_id:4;
u32 T00_RESERVED:4;
u32 T00_header_length:6;
u32 T00_frame_length:12;
};
#else
struct
{
#else
struct {
u32 T00_frame_length:12;
u32 T00_header_length:6;
u32 T00_RESERVED:4;
u32 T00_tx_packet_id:4;//930519.4.e 930810.3.c
u32 T00_RESERVED_ID:2;//3 bit ID reserved
u32 T00_IgnoreResult:1;// The same mechanism with T00 setting. 050111 Modify for TS
u32 T00_IsLastMpdu:1;// 0: not 1:Yes for software used
u32 T00_last_mpdu:1; // for hardware use
u32 T00_first_mpdu:1; // for hardware use
u32 T00_tx_packet_id:4;
u32 T00_RESERVED_ID:2; /* 3 bit ID reserved */
u32 T00_IgnoreResult:1; /* The same mechanism with T00 setting. */
u32 T00_IsLastMpdu:1; /* 0:not 1:Yes for software used */
u32 T00_last_mpdu:1; /* for hardware use */
u32 T00_first_mpdu:1; /* for hardware use */
};
#endif
#endif
};
} T00_DESCRIPTOR, *PT00_DESCRIPTOR;
typedef struct _R01_DESCRIPTOR
{
union
{
typedef struct _R01_DESCRIPTOR {
union {
u32 value;
#ifdef _BIG_ENDIAN_ //20060926 add by anson's endian
struct
{
#ifdef _BIG_ENDIAN_
struct {
u32 R01_RESERVED:3;
u32 R01_mod_type:1;
u32 R01_pre_type:1;
@ -197,9 +184,8 @@ typedef struct _R01_DESCRIPTOR
u32 R01_icv_error:1;
u32 R01_crc_error:1;
};
#else
struct
{
#else
struct {
u32 R01_crc_error:1;
u32 R01_icv_error:1;
u32 R01_null_key_to_authentication_frame:1;
@ -220,18 +206,15 @@ typedef struct _R01_DESCRIPTOR
u32 R01_mod_type:1;
u32 R01_RESERVED:3;
};
#endif
#endif
};
} R01_DESCRIPTOR, *PR01_DESCRIPTOR;
typedef struct _T01_DESCRIPTOR
{
union
{
typedef struct _T01_DESCRIPTOR {
union {
u32 value;
#ifdef _BIG_ENDIAN_ //20061009 anson's endian
struct
{
#ifdef _BIG_ENDIAN_
struct {
u32 T01_rts_cts_duration:16;
u32 T01_fall_back_rate:3;
u32 T01_add_rts:1;
@ -245,9 +228,8 @@ typedef struct _T01_DESCRIPTOR
u32 T01_loop_back_wep_mode:1;
u32 T01_retry_abort_ebable:1;
};
#else
struct
{
#else
struct {
u32 T01_retry_abort_ebable:1;
u32 T01_loop_back_wep_mode:1;
u32 T01_inhibit_crc:1;
@ -261,21 +243,18 @@ typedef struct _T01_DESCRIPTOR
u32 T01_fall_back_rate:3;
u32 T01_rts_cts_duration:16;
};
#endif
#endif
};
} T01_DESCRIPTOR, *PT01_DESCRIPTOR;
typedef struct _T02_DESCRIPTOR
{
union
{
typedef struct _T02_DESCRIPTOR {
union {
u32 value;
#ifdef _BIG_ENDIAN_ //20061009 add by anson's endian
struct
{
u32 T02_IsLastMpdu:1;// The same mechanism with T00 setting
u32 T02_IgnoreResult:1;// The same mechanism with T00 setting. 050111 Modify for TS
u32 T02_RESERVED_ID:2;// The same mechanism with T00 setting
#ifdef _BIG_ENDIAN_
struct {
u32 T02_IsLastMpdu:1; /* The same mechanism with T00 setting */
u32 T02_IgnoreResult:1; /* The same mechanism with T00 setting. */
u32 T02_RESERVED_ID:2; /* The same mechanism with T00 setting */
u32 T02_Tx_PktID:4;
u32 T02_MPDU_Cnt:4;
u32 T02_RTS_Cnt:4;
@ -290,9 +269,8 @@ typedef struct _T02_DESCRIPTOR
u32 T02_transmit_abort:1;
u32 T02_transmit_fail:1;
};
#else
struct
{
#else
struct {
u32 T02_transmit_fail:1;
u32 T02_transmit_abort:1;
u32 T02_out_of_MaxTxMSDULiftTime:1;
@ -306,122 +284,120 @@ typedef struct _T02_DESCRIPTOR
u32 T02_RTS_Cnt:4;
u32 T02_MPDU_Cnt:4;
u32 T02_Tx_PktID:4;
u32 T02_RESERVED_ID:2;// The same mechanism with T00 setting
u32 T02_IgnoreResult:1;// The same mechanism with T00 setting. 050111 Modify for TS
u32 T02_IsLastMpdu:1;// The same mechanism with T00 setting
u32 T02_RESERVED_ID:2; /* The same mechanism with T00 setting */
u32 T02_IgnoreResult:1; /* The same mechanism with T00 setting. */
u32 T02_IsLastMpdu:1; /* The same mechanism with T00 setting */
};
#endif
#endif
};
} T02_DESCRIPTOR, *PT02_DESCRIPTOR;
struct wb35_descriptor { // Skip length = 8 DWORD
// ID for descriptor ---, The field doesn't be cleard in the operation of Descriptor definition
struct wb35_descriptor { /* Skip length = 8 DWORD */
/* ID for descriptor ---, The field doesn't be cleard in the operation of Descriptor definition */
u8 Descriptor_ID;
//----------------------The above region doesn't be cleared by DESCRIPTOR_RESET------
/* ----------------------The above region doesn't be cleared by DESCRIPTOR_RESET------ */
u8 RESERVED[3];
u16 FragmentThreshold;
u8 InternalUsed;//Only can be used by operation of descriptor definition
u8 Type;// 0: 802.3 1:802.11 data frame 2:802.11 management frame
u8 InternalUsed; /* Only can be used by operation of descriptor definition */
u8 Type; /* 0: 802.3 1:802.11 data frame 2:802.11 management frame */
u8 PreambleMode;// 0: short 1:long
u8 PreambleMode;/* 0: short 1:long */
u8 TxRate;
u8 FragmentCount;
u8 EapFix; // For speed up key install
u8 EapFix; /* For speed up key install */
// For R00 and T00 ----------------------------------------------
union
{
/* For R00 and T00 ------------------------------ */
union {
R00_DESCRIPTOR R00;
T00_DESCRIPTOR T00;
};
// For R01 and T01 ----------------------------------------------
union
{
/* For R01 and T01 ------------------------------ */
union {
R01_DESCRIPTOR R01;
T01_DESCRIPTOR T01;
};
// For R02 and T02 ----------------------------------------------
union
{
u32 R02;
/* For R02 and T02 ------------------------------ */
union {
u32 R02;
T02_DESCRIPTOR T02;
};
// For R03 and T03 ----------------------------------------------
// For software used
union
{
/* For R03 and T03 ------------------------------ */
/* For software used */
union {
u32 R03;
u32 T03;
struct
{
struct {
u8 buffer_number;
u8 buffer_start_index;
u16 buffer_total_size;
};
};
// For storing the buffer
u16 buffer_size[ MAX_DESCRIPTOR_BUFFER_INDEX ];
void* buffer_address[ MAX_DESCRIPTOR_BUFFER_INDEX ];//931130.4.q
/* For storing the buffer */
u16 buffer_size[MAX_DESCRIPTOR_BUFFER_INDEX];
void *buffer_address[MAX_DESCRIPTOR_BUFFER_INDEX];
};
#define DEFAULT_NULL_PACKET_COUNT 180000 //20060828.1 Add. 180 seconds
#define DEFAULT_NULL_PACKET_COUNT 180000 /* 180 seconds */
#define MAX_TXVGA_EEPROM 9 //How many word(u16) of EEPROM will be used for TxVGA
#define MAX_RF_PARAMETER 32
#define MAX_TXVGA_EEPROM 9 /* How many word(u16) of EEPROM will be used for TxVGA */
#define MAX_RF_PARAMETER 32
typedef struct _TXVGA_FOR_50 {
u8 ChanNo;
u8 TxVgaValue;
u8 ChanNo;
u8 TxVgaValue;
} TXVGA_FOR_50;
//=====================================================================
// Device related include
//=====================================================================
/*
* ==============================================
* Device related include
* ==============================================
*/
#include "wbusb_s.h"
#include "wb35reg_s.h"
#include "wb35tx_s.h"
#include "wb35rx_s.h"
// For Hal using ==================================================================
/* For Hal using ============================================ */
struct hw_data {
// For compatible with 33
/* For compatible with 33 */
u32 revision;
u32 BB3c_cal; // The value for Tx calibration comes from EEPROM
u32 BB54_cal; // The value for Rx calibration comes from EEPROM
u32 BB3c_cal; /* The value for Tx calibration comes from EEPROM */
u32 BB54_cal; /* The value for Rx calibration comes from EEPROM */
// For surprise remove
u32 SurpriseRemove; // 0: Normal 1: Surprise remove
/* For surprise remove */
u32 SurpriseRemove; /* 0: Normal 1: Surprise remove */
u8 IsKeyPreSet;
u8 CalOneTime; // 20060630.1
u8 CalOneTime;
u8 VCO_trim;
// For Fix 1'st DMA bug
u32 FragCount;
u32 DMAFix; //V1_DMA_FIX The variable can be removed if driver want to save mem space for V2.
u32 DMAFix; /* V1_DMA_FIX The variable can be removed if driver want to save mem space for V2. */
//===============================================
// Definition for MAC address
//===============================================
u8 PermanentMacAddress[ETH_ALEN + 2]; // The Enthernet addr that are stored in EEPROM. + 2 to 8-byte alignment
u8 CurrentMacAddress[ETH_ALEN + 2]; // The Enthernet addr that are in used. + 2 to 8-byte alignment
/*
* ===============================================
* Definition for MAC address
* ===============================================
*/
u8 PermanentMacAddress[ETH_ALEN + 2]; /* The Ethernet addr that are stored in EEPROM. + 2 to 8-byte alignment */
u8 CurrentMacAddress[ETH_ALEN + 2]; /* The Enthernet addr that are in used. + 2 to 8-byte alignment */
//=====================================================================
// Definition for 802.11
//=====================================================================
u8 *bssid_pointer; // Used by hal_get_bssid for return value
u8 bssid[8];// Only 6 byte will be used. 8 byte is required for read buffer
u8 ssid[32];// maximum ssid length is 32 byte
/*
* =========================================
* Definition for 802.11
* =========================================
*/
u8 *bssid_pointer; /* Used by hal_get_bssid for return value */
u8 bssid[8]; /* Only 6 byte will be used. 8 byte is required for read buffer */
u8 ssid[32]; /* maximum ssid length is 32 byte */
u16 AID;
u8 ssid_length;
@ -433,112 +409,118 @@ struct hw_data {
u16 BeaconPeriod;
u16 ProbeDelay;
u8 bss_type;// 0: IBSS_NET or 1:ESS_NET
u8 preamble;// 0: short preamble, 1: long preamble
u8 slot_time_select;// 9 or 20 value
u8 phy_type;// Phy select
u8 bss_type;/* 0: IBSS_NET or 1:ESS_NET */
u8 preamble;/* 0: short preamble, 1: long preamble */
u8 slot_time_select; /* 9 or 20 value */
u8 phy_type; /* Phy select */
u32 phy_para[MAX_RF_PARAMETER];
u32 phy_number;
u32 CurrentRadioSw; // 20060320.2 0:On 1:Off
u32 CurrentRadioHw; // 20060825 0:On 1:Off
u32 CurrentRadioSw; /* 0:On 1:Off */
u32 CurrentRadioHw; /* 0:On 1:Off */
u8 *power_save_point; // Used by hal_get_power_save_mode for return value
u8 *power_save_point; /* Used by hal_get_power_save_mode for return value */
u8 cwmin;
u8 desired_power_save;
u8 dtim;// Is running dtim
u8 mapping_key_replace_index;//In Key table, the next index be replaced 931130.4.r
u8 dtim; /* Is running dtim */
u8 mapping_key_replace_index; /* In Key table, the next index be replaced */
u16 MaxReceiveLifeTime;
u16 FragmentThreshold;
u16 FragmentThreshold_tmp;
u16 cwmax;
u8 Key_slot[MAX_KEY_TABLE][8]; //Ownership record for key slot. For Alignment
u32 Key_content[MAX_KEY_TABLE][12]; // 10DW for each entry + 2 for burst command( Off and On valid bit)
u8 Key_slot[MAX_KEY_TABLE][8]; /* Ownership record for key slot. For Alignment */
u32 Key_content[MAX_KEY_TABLE][12]; /* 10DW for each entry + 2 for burst command (Off and On valid bit) */
u8 CurrentDefaultKeyIndex;
u32 CurrentDefaultKeyLength;
//========================================================================
// Variable for each module
//========================================================================
struct wb_usb WbUsb; // Need WbUsb.h
struct wb35_reg reg; // Need Wb35Reg.h
struct wb35_tx Wb35Tx; // Need Wb35Tx.h
struct wb35_rx Wb35Rx; // Need Wb35Rx.h
/*
* ==================================================
* Variable for each module
* ==================================================
*/
struct wb_usb WbUsb; /* Need WbUsb.h */
struct wb35_reg reg; /* Need Wb35Reg.h */
struct wb35_tx Wb35Tx; /* Need Wb35Tx.h */
struct wb35_rx Wb35Rx; /* Need Wb35Rx.h */
struct timer_list LEDTimer;// For LED
struct timer_list LEDTimer; /* For LED */
u32 LEDpoint;// For LED
u32 LEDpoint; /* For LED */
u32 dto_tx_retry_count; // LA20040210_DTO kevin
u32 dto_tx_frag_count; // LA20040210_DTO kevin
u32 rx_ok_count[13]; // index=0: total rx ok
//u32 rx_ok_bytes[13]; // index=0, total rx ok bytes
u32 rx_err_count[13]; // index=0: total rx err
u32 dto_tx_retry_count;
u32 dto_tx_frag_count;
u32 rx_ok_count[13]; /* index=0: total rx ok */
u32 rx_err_count[13]; /* index=0: total rx err */
//for Tx debug
/* for Tx debug */
u32 tx_TBTT_start_count;
u32 tx_ETR_count;
u32 tx_WepOn_false_count;
u32 tx_Null_key_count;
u32 tx_retry_count[8];
u8 PowerIndexFromEEPROM; // For 2412MHz
u8 power_index;
u8 IsWaitJoinComplete; // TRUE: set join request
u8 band;
u8 PowerIndexFromEEPROM; /* For 2412MHz */
u8 power_index;
u8 IsWaitJoinComplete; /* TRUE: set join request */
u8 band;
u16 SoftwareSet;
u16 Reserved_s;
u16 SoftwareSet;
u16 Reserved_s;
u32 IsInitOK; // 0: Driver starting 1: Driver init OK
u32 IsInitOK; /* 0: Driver starting 1: Driver init OK */
// For Phy calibration
s32 iq_rsdl_gain_tx_d2;
s32 iq_rsdl_phase_tx_d2;
u32 txvga_setting_for_cal; // 20060703.1 Add
/* For Phy calibration */
s32 iq_rsdl_gain_tx_d2;
s32 iq_rsdl_phase_tx_d2;
u32 txvga_setting_for_cal;
u8 TxVgaSettingInEEPROM[ (((MAX_TXVGA_EEPROM*2)+3) & ~0x03) ]; // 20060621 For backup EEPROM value
u8 TxVgaFor24[16]; // Max is 14, 2 for alignment
TXVGA_FOR_50 TxVgaFor50[36]; // 35 channels in 5G. 35x2 = 70 byte. 2 for alignments
u8 TxVgaSettingInEEPROM[(((MAX_TXVGA_EEPROM * 2) + 3) & ~0x03)]; /* For EEPROM value */
u8 TxVgaFor24[16]; /* Max is 14, 2 for alignment */
TXVGA_FOR_50 TxVgaFor50[36]; /* 35 channels in 5G. 35x2 = 70 byte. 2 for alignments */
u16 Scan_Interval;
u16 RESERVED6;
u16 Scan_Interval;
u16 RESERVED6;
// LED control
/* LED control */
u32 LED_control;
// LED_control 4 byte: Gray_Led_1[3] Gray_Led_0[2] Led[1] Led[0]
// Gray_Led
// For Led gray setting
// Led
// 0: normal control, LED behavior will decide by EEPROM setting
// 1: Turn off specific LED
// 2: Always on specific LED
// 3: slow blinking specific LED
// 4: fast blinking specific LED
// 5: WPS led control is set. Led0 is Red, Led1 id Green
// Led[1] is parameter for WPS LED mode
// // 1:InProgress 2: Error 3: Session overlap 4: Success 20061108 control
u32 LED_LinkOn; //Turn LED on control
u32 LED_Scanning; // Let LED in scan process control
u32 LED_Blinking; // Temp variable for shining
/*
* LED_control 4 byte: Gray_Led_1[3] Gray_Led_0[2] Led[1] Led[0]
* Gray_Led
* For Led gray setting
* Led
* 0: normal control,
* LED behavior will decide by EEPROM setting
* 1: Turn off specific LED
* 2: Always on specific LED
* 3: slow blinking specific LED
* 4: fast blinking specific LED
* 5: WPS led control is set. Led0 is Red, Led1 id Green
*
* Led[1] is parameter for WPS LED mode
* 1:InProgress
* 2: Error
* 3: Session overlap
* 4: Success control
*/
u32 LED_LinkOn; /* Turn LED on control */
u32 LED_Scanning; /* Let LED in scan process control */
u32 LED_Blinking; /* Temp variable for shining */
u32 RxByteCountLast;
u32 TxByteCountLast;
atomic_t SurpriseRemoveCount;
// For global timer
u32 time_count;//TICK_TIME_100ms 1 = 100ms
/* For global timer */
u32 time_count; /* TICK_TIME_100ms 1 = 100ms */
// For error recover
/* For error recover */
u32 HwStop;
// 20060828.1 for avoid AP disconnect
/* For avoid AP disconnect */
u32 NullPacketCount;
};
#endif