Linux 3.13-rc4
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.15 (GNU/Linux) iQEcBAABAgAGBQJSrhGrAAoJEHm+PkMAQRiGsNoH/jIK3CsQ2lbW7yRLXmfgtbzz i2Kep6D4SDvmaLpLYOVC8xNYTiE8jtTbSXHomwP5wMZ63MQDhBfnEWsEWqeZ9+D9 3Q46p0QWuoBgYu2VGkoxTfygkT6hhSpwWIi3SeImbY4fg57OHiUil/+YGhORM4Qc K4549OCTY3sIrgmWL77gzqjRUo+pQ4C73NKqZ3+5nlOmYBZC1yugk8mFwEpQkwhK 4NRNU760Fo+XIht/bINqRiPMddzC15p0mxvJy3cDW8bZa1tFSS9SB7AQUULBbcHL +2dFlFOEb5SV1sNiNPrJ0W+h2qUh2e7kPB0F8epaBppgbwVdyQoC2u4uuLV2ZN0= =lI2r -----END PGP SIGNATURE----- Merge tag 'v3.13-rc4' into regulator-pfuze100 Linux 3.13-rc4
This commit is contained in:
Mark Brown
commit
598911b42c
5
CREDITS
5
CREDITS
|
|
@ -655,6 +655,11 @@ S: Stanford University
|
|||
S: Stanford, California 94305
|
||||
S: USA
|
||||
|
||||
N: Carlos Chinea
|
||||
E: carlos.chinea@nokia.com
|
||||
E: cch.devel@gmail.com
|
||||
D: Author of HSI Subsystem
|
||||
|
||||
N: Randolph Chung
|
||||
E: tausq@debian.org
|
||||
D: Linux/PA-RISC hacker
|
||||
|
|
|
|||
|
|
@ -196,13 +196,6 @@ chmod 0644 /dev/cpu/microcode
|
|||
as root before you can use this. You'll probably also want to
|
||||
get the user-space microcode_ctl utility to use with this.
|
||||
|
||||
Powertweak
|
||||
----------
|
||||
|
||||
If you are running v0.1.17 or earlier, you should upgrade to
|
||||
version v0.99.0 or higher. Running old versions may cause problems
|
||||
with programs using shared memory.
|
||||
|
||||
udev
|
||||
----
|
||||
udev is a userspace application for populating /dev dynamically with
|
||||
|
|
@ -366,10 +359,6 @@ Intel P6 microcode
|
|||
------------------
|
||||
o <http://www.urbanmyth.org/microcode/>
|
||||
|
||||
Powertweak
|
||||
----------
|
||||
o <http://powertweak.sourceforge.net/>
|
||||
|
||||
udev
|
||||
----
|
||||
o <http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html>
|
||||
|
|
|
|||
|
|
@ -58,7 +58,7 @@
|
|||
</sect1>
|
||||
<sect1><title>Wait queues and Wake events</title>
|
||||
!Iinclude/linux/wait.h
|
||||
!Ekernel/wait.c
|
||||
!Ekernel/sched/wait.c
|
||||
</sect1>
|
||||
<sect1><title>High-resolution timers</title>
|
||||
!Iinclude/linux/ktime.h
|
||||
|
|
|
|||
|
|
@ -73,7 +73,8 @@ range from zero to the maximal number of valid planes for the currently active
|
|||
format. For the single-planar API, applications must set <structfield> plane
|
||||
</structfield> to zero. Additional flags may be posted in the <structfield>
|
||||
flags </structfield> field. Refer to a manual for open() for details.
|
||||
Currently only O_CLOEXEC is supported. All other fields must be set to zero.
|
||||
Currently only O_CLOEXEC, O_RDONLY, O_WRONLY, and O_RDWR are supported. All
|
||||
other fields must be set to zero.
|
||||
In the case of multi-planar API, every plane is exported separately using
|
||||
multiple <constant> VIDIOC_EXPBUF </constant> calls. </para>
|
||||
|
||||
|
|
@ -170,8 +171,9 @@ multi-planar API. Otherwise this value must be set to zero. </entry>
|
|||
<entry>__u32</entry>
|
||||
<entry><structfield>flags</structfield></entry>
|
||||
<entry>Flags for the newly created file, currently only <constant>
|
||||
O_CLOEXEC </constant> is supported, refer to the manual of open() for more
|
||||
details.</entry>
|
||||
O_CLOEXEC </constant>, <constant>O_RDONLY</constant>, <constant>O_WRONLY
|
||||
</constant>, and <constant>O_RDWR</constant> are supported, refer to the manual
|
||||
of open() for more details.</entry>
|
||||
</row>
|
||||
<row>
|
||||
<entry>__s32</entry>
|
||||
|
|
|
|||
|
|
@ -164,10 +164,10 @@ This points to a number of methods, all of which need to be provided:
|
|||
|
||||
(4) Diff the index keys of two objects.
|
||||
|
||||
int (*diff_objects)(const void *a, const void *b);
|
||||
int (*diff_objects)(const void *object, const void *index_key);
|
||||
|
||||
Return the bit position at which the index keys of two objects differ or
|
||||
-1 if they are the same.
|
||||
Return the bit position at which the index key of the specified object
|
||||
differs from the given index key or -1 if they are the same.
|
||||
|
||||
|
||||
(5) Free an object.
|
||||
|
|
|
|||
|
|
@ -266,10 +266,12 @@ E.g.
|
|||
Invalidation is removing an entry from the cache without writing it
|
||||
back. Cache blocks can be invalidated via the invalidate_cblocks
|
||||
message, which takes an arbitrary number of cblock ranges. Each cblock
|
||||
must be expressed as a decimal value, in the future a variant message
|
||||
that takes cblock ranges expressed in hexidecimal may be needed to
|
||||
better support efficient invalidation of larger caches. The cache must
|
||||
be in passthrough mode when invalidate_cblocks is used.
|
||||
range's end value is "one past the end", meaning 5-10 expresses a range
|
||||
of values from 5 to 9. Each cblock must be expressed as a decimal
|
||||
value, in the future a variant message that takes cblock ranges
|
||||
expressed in hexidecimal may be needed to better support efficient
|
||||
invalidation of larger caches. The cache must be in passthrough mode
|
||||
when invalidate_cblocks is used.
|
||||
|
||||
invalidate_cblocks [<cblock>|<cblock begin>-<cblock end>]*
|
||||
|
||||
|
|
|
|||
|
|
@ -7,10 +7,18 @@ The MPU contain CPUs, GIC, L2 cache and a local PRCM.
|
|||
Required properties:
|
||||
- compatible : Should be "ti,omap3-mpu" for OMAP3
|
||||
Should be "ti,omap4-mpu" for OMAP4
|
||||
Should be "ti,omap5-mpu" for OMAP5
|
||||
- ti,hwmods: "mpu"
|
||||
|
||||
Examples:
|
||||
|
||||
- For an OMAP5 SMP system:
|
||||
|
||||
mpu {
|
||||
compatible = "ti,omap5-mpu";
|
||||
ti,hwmods = "mpu"
|
||||
};
|
||||
|
||||
- For an OMAP4 SMP system:
|
||||
|
||||
mpu {
|
||||
|
|
|
|||
|
|
@ -7,6 +7,7 @@ representation in the device tree should be done as under:-
|
|||
Required properties:
|
||||
|
||||
- compatible : should be one of
|
||||
"arm,armv8-pmuv3"
|
||||
"arm,cortex-a15-pmu"
|
||||
"arm,cortex-a9-pmu"
|
||||
"arm,cortex-a8-pmu"
|
||||
|
|
|
|||
|
|
@ -49,7 +49,7 @@ adc@12D10000 {
|
|||
/* NTC thermistor is a hwmon device */
|
||||
ncp15wb473@0 {
|
||||
compatible = "ntc,ncp15wb473";
|
||||
pullup-uV = <1800000>;
|
||||
pullup-uv = <1800000>;
|
||||
pullup-ohm = <47000>;
|
||||
pulldown-ohm = <0>;
|
||||
io-channels = <&adc 4>;
|
||||
|
|
|
|||
|
|
@ -6,7 +6,7 @@ SoC's in the Exynos4 family.
|
|||
|
||||
Required Properties:
|
||||
|
||||
- comptible: should be one of the following.
|
||||
- compatible: should be one of the following.
|
||||
- "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC.
|
||||
- "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC.
|
||||
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@ controllers within the Exynos5250 SoC.
|
|||
|
||||
Required Properties:
|
||||
|
||||
- comptible: should be one of the following.
|
||||
- compatible: should be one of the following.
|
||||
- "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC.
|
||||
|
||||
- reg: physical base address of the controller and length of memory mapped
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@ controllers within the Exynos5420 SoC.
|
|||
|
||||
Required Properties:
|
||||
|
||||
- comptible: should be one of the following.
|
||||
- compatible: should be one of the following.
|
||||
- "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC.
|
||||
|
||||
- reg: physical base address of the controller and length of memory mapped
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@ controllers within the Exynos5440 SoC.
|
|||
|
||||
Required Properties:
|
||||
|
||||
- comptible: should be "samsung,exynos5440-clock".
|
||||
- compatible: should be "samsung,exynos5440-clock".
|
||||
|
||||
- reg: physical base address of the controller and length of memory mapped
|
||||
region.
|
||||
|
|
|
|||
|
|
@ -5,16 +5,42 @@ This is for the non-QE/CPM/GUTs GPIO controllers as found on
|
|||
|
||||
Every GPIO controller node must have #gpio-cells property defined,
|
||||
this information will be used to translate gpio-specifiers.
|
||||
See bindings/gpio/gpio.txt for details of how to specify GPIO
|
||||
information for devices.
|
||||
|
||||
The GPIO module usually is connected to the SoC's internal interrupt
|
||||
controller, see bindings/interrupt-controller/interrupts.txt (the
|
||||
interrupt client nodes section) for details how to specify this GPIO
|
||||
module's interrupt.
|
||||
|
||||
The GPIO module may serve as another interrupt controller (cascaded to
|
||||
the SoC's internal interrupt controller). See the interrupt controller
|
||||
nodes section in bindings/interrupt-controller/interrupts.txt for
|
||||
details.
|
||||
|
||||
Required properties:
|
||||
- compatible : "fsl,<CHIP>-gpio" followed by "fsl,mpc8349-gpio" for
|
||||
83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx.
|
||||
- #gpio-cells : Should be two. The first cell is the pin number and the
|
||||
second cell is used to specify optional parameters (currently unused).
|
||||
- interrupts : Interrupt mapping for GPIO IRQ.
|
||||
- interrupt-parent : Phandle for the interrupt controller that
|
||||
- compatible: "fsl,<chip>-gpio" followed by "fsl,mpc8349-gpio"
|
||||
for 83xx, "fsl,mpc8572-gpio" for 85xx, or
|
||||
"fsl,mpc8610-gpio" for 86xx.
|
||||
- #gpio-cells: Should be two. The first cell is the pin number
|
||||
and the second cell is used to specify optional
|
||||
parameters (currently unused).
|
||||
- interrupt-parent: Phandle for the interrupt controller that
|
||||
services interrupts for this device.
|
||||
- gpio-controller : Marks the port as GPIO controller.
|
||||
- interrupts: Interrupt mapping for GPIO IRQ.
|
||||
- gpio-controller: Marks the port as GPIO controller.
|
||||
|
||||
Optional properties:
|
||||
- interrupt-controller: Empty boolean property which marks the GPIO
|
||||
module as an IRQ controller.
|
||||
- #interrupt-cells: Should be two. Defines the number of integer
|
||||
cells required to specify an interrupt within
|
||||
this interrupt controller. The first cell
|
||||
defines the pin number, the second cell
|
||||
defines additional flags (trigger type,
|
||||
trigger polarity). Note that the available
|
||||
set of trigger conditions supported by the
|
||||
GPIO module depends on the actual SoC.
|
||||
|
||||
Example of gpio-controller nodes for a MPC8347 SoC:
|
||||
|
||||
|
|
@ -22,39 +48,27 @@ Example of gpio-controller nodes for a MPC8347 SoC:
|
|||
#gpio-cells = <2>;
|
||||
compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
|
||||
reg = <0xc00 0x100>;
|
||||
interrupts = <74 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
interrupts = <74 0x8>;
|
||||
gpio-controller;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpio2: gpio-controller@d00 {
|
||||
#gpio-cells = <2>;
|
||||
compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
|
||||
reg = <0xd00 0x100>;
|
||||
interrupts = <75 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
interrupts = <75 0x8>;
|
||||
gpio-controller;
|
||||
};
|
||||
|
||||
See booting-without-of.txt for details of how to specify GPIO
|
||||
information for devices.
|
||||
|
||||
To use GPIO pins as interrupt sources for peripherals, specify the
|
||||
GPIO controller as the interrupt parent and define GPIO number +
|
||||
trigger mode using the interrupts property, which is defined like
|
||||
this:
|
||||
|
||||
interrupts = <number trigger>, where:
|
||||
- number: GPIO pin (0..31)
|
||||
- trigger: trigger mode:
|
||||
2 = trigger on falling edge
|
||||
3 = trigger on both edges
|
||||
|
||||
Example of device using this is:
|
||||
Example of a peripheral using the GPIO module as an IRQ controller:
|
||||
|
||||
funkyfpga@0 {
|
||||
compatible = "funky-fpga";
|
||||
...
|
||||
interrupts = <4 3>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <4 3>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -1,7 +1,8 @@
|
|||
I2C for OMAP platforms
|
||||
|
||||
Required properties :
|
||||
- compatible : Must be "ti,omap3-i2c" or "ti,omap4-i2c"
|
||||
- compatible : Must be "ti,omap2420-i2c", "ti,omap2430-i2c", "ti,omap3-i2c"
|
||||
or "ti,omap4-i2c"
|
||||
- ti,hwmods : Must be "i2c<n>", n being the instance number (1-based)
|
||||
- #address-cells = <1>;
|
||||
- #size-cells = <0>;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,54 @@
|
|||
* TI MMC host controller for OMAP1 and 2420
|
||||
|
||||
The MMC Host Controller on TI OMAP1 and 2420 family provides
|
||||
an interface for MMC, SD, and SDIO types of memory cards.
|
||||
|
||||
This file documents differences between the core properties described
|
||||
by mmc.txt and the properties used by the omap mmc driver.
|
||||
|
||||
Note that this driver will not work with omap2430 or later omaps,
|
||||
please see the omap hsmmc driver for the current omaps.
|
||||
|
||||
Required properties:
|
||||
- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
|
||||
- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
|
||||
instance starting 1
|
||||
|
||||
Examples:
|
||||
|
||||
msdi1: mmc@4809c000 {
|
||||
compatible = "ti,omap2420-mmc";
|
||||
ti,hwmods = "msdi1";
|
||||
reg = <0x4809c000 0x80>;
|
||||
interrupts = <83>;
|
||||
dmas = <&sdma 61 &sdma 62>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
* TI MMC host controller for OMAP1 and 2420
|
||||
|
||||
The MMC Host Controller on TI OMAP1 and 2420 family provides
|
||||
an interface for MMC, SD, and SDIO types of memory cards.
|
||||
|
||||
This file documents differences between the core properties described
|
||||
by mmc.txt and the properties used by the omap mmc driver.
|
||||
|
||||
Note that this driver will not work with omap2430 or later omaps,
|
||||
please see the omap hsmmc driver for the current omaps.
|
||||
|
||||
Required properties:
|
||||
- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
|
||||
- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
|
||||
instance starting 1
|
||||
|
||||
Examples:
|
||||
|
||||
msdi1: mmc@4809c000 {
|
||||
compatible = "ti,omap2420-mmc";
|
||||
ti,hwmods = "msdi1";
|
||||
reg = <0x4809c000 0x80>;
|
||||
interrupts = <83>;
|
||||
dmas = <&sdma 61 &sdma 62>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
|
|
@ -4,7 +4,7 @@ This file provides information, what the device node
|
|||
for the davinci_emac interface contains.
|
||||
|
||||
Required properties:
|
||||
- compatible: "ti,davinci-dm6467-emac";
|
||||
- compatible: "ti,davinci-dm6467-emac" or "ti,am3517-emac"
|
||||
- reg: Offset and length of the register set for the device
|
||||
- ti,davinci-ctrl-reg-offset: offset to control register
|
||||
- ti,davinci-ctrl-mod-reg-offset: offset to control module register
|
||||
|
|
|
|||
|
|
@ -15,6 +15,7 @@ Optional properties:
|
|||
only if property "phy-reset-gpios" is available. Missing the property
|
||||
will have the duration be 1 millisecond. Numbers greater than 1000 are
|
||||
invalid and 1 millisecond will be used instead.
|
||||
- phy-supply: regulator that powers the Ethernet PHY.
|
||||
|
||||
Example:
|
||||
|
||||
|
|
@ -25,4 +26,5 @@ ethernet@83fec000 {
|
|||
phy-mode = "mii";
|
||||
phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
|
||||
local-mac-address = [00 04 9F 01 1B B9];
|
||||
phy-supply = <®_fec_supply>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -8,3 +8,7 @@ Required properties:
|
|||
Optional properties:
|
||||
- phy-device : phandle to Ethernet phy
|
||||
- local-mac-address : Ethernet mac address to use
|
||||
- reg-io-width : Mask of sizes (in bytes) of the IO accesses that
|
||||
are supported on the device. Valid value for SMSC LAN91c111 are
|
||||
1, 2 or 4. If it's omitted or invalid, the size would be 2 meaning
|
||||
16-bit access only.
|
||||
|
|
|
|||
|
|
@ -0,0 +1,17 @@
|
|||
Qualcomm MSM pseudo random number generator.
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible : should be "qcom,prng"
|
||||
- reg : specifies base physical address and size of the registers map
|
||||
- clocks : phandle to clock-controller plus clock-specifier pair
|
||||
- clock-names : "core" clocks all registers, FIFO and circuits in PRNG IP block
|
||||
|
||||
Example:
|
||||
|
||||
rng@f9bff000 {
|
||||
compatible = "qcom,prng";
|
||||
reg = <0xf9bff000 0x200>;
|
||||
clocks = <&clock GCC_PRNG_AHB_CLK>;
|
||||
clock-names = "core";
|
||||
};
|
||||
|
|
@ -1,5 +0,0 @@
|
|||
NVIDIA Tegra 2 SPI device
|
||||
|
||||
Required properties:
|
||||
- compatible : should be "nvidia,tegra20-spi".
|
||||
- gpios : should specify GPIOs used for chipselect.
|
||||
|
|
@ -32,12 +32,14 @@ est ESTeem Wireless Modems
|
|||
fsl Freescale Semiconductor
|
||||
GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc.
|
||||
gef GE Fanuc Intelligent Platforms Embedded Systems, Inc.
|
||||
gmt Global Mixed-mode Technology, Inc.
|
||||
hisilicon Hisilicon Limited.
|
||||
hp Hewlett Packard
|
||||
ibm International Business Machines (IBM)
|
||||
idt Integrated Device Technologies, Inc.
|
||||
img Imagination Technologies Ltd.
|
||||
intercontrol Inter Control Group
|
||||
lg LG Corporation
|
||||
linux Linux-specific binding
|
||||
lsi LSI Corp. (LSI Logic)
|
||||
marvell Marvell Technology Group Ltd.
|
||||
|
|
|
|||
|
|
@ -0,0 +1,14 @@
|
|||
00-INDEX
|
||||
- This file
|
||||
gpio.txt
|
||||
- Introduction to GPIOs and their kernel interfaces
|
||||
consumer.txt
|
||||
- How to obtain and use GPIOs in a driver
|
||||
driver.txt
|
||||
- How to write a GPIO driver
|
||||
board.txt
|
||||
- How to assign GPIOs to a consumer device and a function
|
||||
sysfs.txt
|
||||
- Information about the GPIO sysfs interface
|
||||
gpio-legacy.txt
|
||||
- Historical documentation of the deprecated GPIO integer interface
|
||||
|
|
@ -0,0 +1,115 @@
|
|||
GPIO Mappings
|
||||
=============
|
||||
|
||||
This document explains how GPIOs can be assigned to given devices and functions.
|
||||
Note that it only applies to the new descriptor-based interface. For a
|
||||
description of the deprecated integer-based GPIO interface please refer to
|
||||
gpio-legacy.txt (actually, there is no real mapping possible with the old
|
||||
interface; you just fetch an integer from somewhere and request the
|
||||
corresponding GPIO.
|
||||
|
||||
Platforms that make use of GPIOs must select ARCH_REQUIRE_GPIOLIB (if GPIO usage
|
||||
is mandatory) or ARCH_WANT_OPTIONAL_GPIOLIB (if GPIO support can be omitted) in
|
||||
their Kconfig. Then, how GPIOs are mapped depends on what the platform uses to
|
||||
describe its hardware layout. Currently, mappings can be defined through device
|
||||
tree, ACPI, and platform data.
|
||||
|
||||
Device Tree
|
||||
-----------
|
||||
GPIOs can easily be mapped to devices and functions in the device tree. The
|
||||
exact way to do it depends on the GPIO controller providing the GPIOs, see the
|
||||
device tree bindings for your controller.
|
||||
|
||||
GPIOs mappings are defined in the consumer device's node, in a property named
|
||||
<function>-gpios, where <function> is the function the driver will request
|
||||
through gpiod_get(). For example:
|
||||
|
||||
foo_device {
|
||||
compatible = "acme,foo";
|
||||
...
|
||||
led-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>, /* red */
|
||||
<&gpio 16 GPIO_ACTIVE_HIGH>, /* green */
|
||||
<&gpio 17 GPIO_ACTIVE_HIGH>; /* blue */
|
||||
|
||||
power-gpio = <&gpio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
This property will make GPIOs 15, 16 and 17 available to the driver under the
|
||||
"led" function, and GPIO 1 as the "power" GPIO:
|
||||
|
||||
struct gpio_desc *red, *green, *blue, *power;
|
||||
|
||||
red = gpiod_get_index(dev, "led", 0);
|
||||
green = gpiod_get_index(dev, "led", 1);
|
||||
blue = gpiod_get_index(dev, "led", 2);
|
||||
|
||||
power = gpiod_get(dev, "power");
|
||||
|
||||
The led GPIOs will be active-high, while the power GPIO will be active-low (i.e.
|
||||
gpiod_is_active_low(power) will be true).
|
||||
|
||||
ACPI
|
||||
----
|
||||
ACPI does not support function names for GPIOs. Therefore, only the "idx"
|
||||
argument of gpiod_get_index() is useful to discriminate between GPIOs assigned
|
||||
to a device. The "con_id" argument can still be set for debugging purposes (it
|
||||
will appear under error messages as well as debug and sysfs nodes).
|
||||
|
||||
Platform Data
|
||||
-------------
|
||||
Finally, GPIOs can be bound to devices and functions using platform data. Board
|
||||
files that desire to do so need to include the following header:
|
||||
|
||||
#include <linux/gpio/driver.h>
|
||||
|
||||
GPIOs are mapped by the means of tables of lookups, containing instances of the
|
||||
gpiod_lookup structure. Two macros are defined to help declaring such mappings:
|
||||
|
||||
GPIO_LOOKUP(chip_label, chip_hwnum, dev_id, con_id, flags)
|
||||
GPIO_LOOKUP_IDX(chip_label, chip_hwnum, dev_id, con_id, idx, flags)
|
||||
|
||||
where
|
||||
|
||||
- chip_label is the label of the gpiod_chip instance providing the GPIO
|
||||
- chip_hwnum is the hardware number of the GPIO within the chip
|
||||
- dev_id is the identifier of the device that will make use of this GPIO. If
|
||||
NULL, the GPIO will be available to all devices.
|
||||
- con_id is the name of the GPIO function from the device point of view. It
|
||||
can be NULL.
|
||||
- idx is the index of the GPIO within the function.
|
||||
- flags is defined to specify the following properties:
|
||||
* GPIOF_ACTIVE_LOW - to configure the GPIO as active-low
|
||||
* GPIOF_OPEN_DRAIN - GPIO pin is open drain type.
|
||||
* GPIOF_OPEN_SOURCE - GPIO pin is open source type.
|
||||
|
||||
In the future, these flags might be extended to support more properties.
|
||||
|
||||
Note that GPIO_LOOKUP() is just a shortcut to GPIO_LOOKUP_IDX() where idx = 0.
|
||||
|
||||
A lookup table can then be defined as follows:
|
||||
|
||||
struct gpiod_lookup gpios_table[] = {
|
||||
GPIO_LOOKUP_IDX("gpio.0", 15, "foo.0", "led", 0, GPIO_ACTIVE_HIGH),
|
||||
GPIO_LOOKUP_IDX("gpio.0", 16, "foo.0", "led", 1, GPIO_ACTIVE_HIGH),
|
||||
GPIO_LOOKUP_IDX("gpio.0", 17, "foo.0", "led", 2, GPIO_ACTIVE_HIGH),
|
||||
GPIO_LOOKUP("gpio.0", 1, "foo.0", "power", GPIO_ACTIVE_LOW),
|
||||
};
|
||||
|
||||
And the table can be added by the board code as follows:
|
||||
|
||||
gpiod_add_table(gpios_table, ARRAY_SIZE(gpios_table));
|
||||
|
||||
The driver controlling "foo.0" will then be able to obtain its GPIOs as follows:
|
||||
|
||||
struct gpio_desc *red, *green, *blue, *power;
|
||||
|
||||
red = gpiod_get_index(dev, "led", 0);
|
||||
green = gpiod_get_index(dev, "led", 1);
|
||||
blue = gpiod_get_index(dev, "led", 2);
|
||||
|
||||
power = gpiod_get(dev, "power");
|
||||
gpiod_direction_output(power, 1);
|
||||
|
||||
Since the "power" GPIO is mapped as active-low, its actual signal will be 0
|
||||
after this code. Contrary to the legacy integer GPIO interface, the active-low
|
||||
property is handled during mapping and is thus transparent to GPIO consumers.
|
||||
|
|
@ -0,0 +1,197 @@
|
|||
GPIO Descriptor Consumer Interface
|
||||
==================================
|
||||
|
||||
This document describes the consumer interface of the GPIO framework. Note that
|
||||
it describes the new descriptor-based interface. For a description of the
|
||||
deprecated integer-based GPIO interface please refer to gpio-legacy.txt.
|
||||
|
||||
|
||||
Guidelines for GPIOs consumers
|
||||
==============================
|
||||
|
||||
Drivers that can't work without standard GPIO calls should have Kconfig entries
|
||||
that depend on GPIOLIB. The functions that allow a driver to obtain and use
|
||||
GPIOs are available by including the following file:
|
||||
|
||||
#include <linux/gpio/consumer.h>
|
||||
|
||||
All the functions that work with the descriptor-based GPIO interface are
|
||||
prefixed with gpiod_. The gpio_ prefix is used for the legacy interface. No
|
||||
other function in the kernel should use these prefixes.
|
||||
|
||||
|
||||
Obtaining and Disposing GPIOs
|
||||
=============================
|
||||
|
||||
With the descriptor-based interface, GPIOs are identified with an opaque,
|
||||
non-forgeable handler that must be obtained through a call to one of the
|
||||
gpiod_get() functions. Like many other kernel subsystems, gpiod_get() takes the
|
||||
device that will use the GPIO and the function the requested GPIO is supposed to
|
||||
fulfill:
|
||||
|
||||
struct gpio_desc *gpiod_get(struct device *dev, const char *con_id)
|
||||
|
||||
If a function is implemented by using several GPIOs together (e.g. a simple LED
|
||||
device that displays digits), an additional index argument can be specified:
|
||||
|
||||
struct gpio_desc *gpiod_get_index(struct device *dev,
|
||||
const char *con_id, unsigned int idx)
|
||||
|
||||
Both functions return either a valid GPIO descriptor, or an error code checkable
|
||||
with IS_ERR(). They will never return a NULL pointer.
|
||||
|
||||
Device-managed variants of these functions are also defined:
|
||||
|
||||
struct gpio_desc *devm_gpiod_get(struct device *dev, const char *con_id)
|
||||
|
||||
struct gpio_desc *devm_gpiod_get_index(struct device *dev,
|
||||
const char *con_id,
|
||||
unsigned int idx)
|
||||
|
||||
A GPIO descriptor can be disposed of using the gpiod_put() function:
|
||||
|
||||
void gpiod_put(struct gpio_desc *desc)
|
||||
|
||||
It is strictly forbidden to use a descriptor after calling this function. The
|
||||
device-managed variant is, unsurprisingly:
|
||||
|
||||
void devm_gpiod_put(struct device *dev, struct gpio_desc *desc)
|
||||
|
||||
|
||||
Using GPIOs
|
||||
===========
|
||||
|
||||
Setting Direction
|
||||
-----------------
|
||||
The first thing a driver must do with a GPIO is setting its direction. This is
|
||||
done by invoking one of the gpiod_direction_*() functions:
|
||||
|
||||
int gpiod_direction_input(struct gpio_desc *desc)
|
||||
int gpiod_direction_output(struct gpio_desc *desc, int value)
|
||||
|
||||
The return value is zero for success, else a negative errno. It should be
|
||||
checked, since the get/set calls don't return errors and since misconfiguration
|
||||
is possible. You should normally issue these calls from a task context. However,
|
||||
for spinlock-safe GPIOs it is OK to use them before tasking is enabled, as part
|
||||
of early board setup.
|
||||
|
||||
For output GPIOs, the value provided becomes the initial output value. This
|
||||
helps avoid signal glitching during system startup.
|
||||
|
||||
A driver can also query the current direction of a GPIO:
|
||||
|
||||
int gpiod_get_direction(const struct gpio_desc *desc)
|
||||
|
||||
This function will return either GPIOF_DIR_IN or GPIOF_DIR_OUT.
|
||||
|
||||
Be aware that there is no default direction for GPIOs. Therefore, **using a GPIO
|
||||
without setting its direction first is illegal and will result in undefined
|
||||
behavior!**
|
||||
|
||||
|
||||
Spinlock-Safe GPIO Access
|
||||
-------------------------
|
||||
Most GPIO controllers can be accessed with memory read/write instructions. Those
|
||||
don't need to sleep, and can safely be done from inside hard (non-threaded) IRQ
|
||||
handlers and similar contexts.
|
||||
|
||||
Use the following calls to access GPIOs from an atomic context:
|
||||
|
||||
int gpiod_get_value(const struct gpio_desc *desc);
|
||||
void gpiod_set_value(struct gpio_desc *desc, int value);
|
||||
|
||||
The values are boolean, zero for low, nonzero for high. When reading the value
|
||||
of an output pin, the value returned should be what's seen on the pin. That
|
||||
won't always match the specified output value, because of issues including
|
||||
open-drain signaling and output latencies.
|
||||
|
||||
The get/set calls do not return errors because "invalid GPIO" should have been
|
||||
reported earlier from gpiod_direction_*(). However, note that not all platforms
|
||||
can read the value of output pins; those that can't should always return zero.
|
||||
Also, using these calls for GPIOs that can't safely be accessed without sleeping
|
||||
(see below) is an error.
|
||||
|
||||
|
||||
GPIO Access That May Sleep
|
||||
--------------------------
|
||||
Some GPIO controllers must be accessed using message based buses like I2C or
|
||||
SPI. Commands to read or write those GPIO values require waiting to get to the
|
||||
head of a queue to transmit a command and get its response. This requires
|
||||
sleeping, which can't be done from inside IRQ handlers.
|
||||
|
||||
Platforms that support this type of GPIO distinguish them from other GPIOs by
|
||||
returning nonzero from this call:
|
||||
|
||||
int gpiod_cansleep(const struct gpio_desc *desc)
|
||||
|
||||
To access such GPIOs, a different set of accessors is defined:
|
||||
|
||||
int gpiod_get_value_cansleep(const struct gpio_desc *desc)
|
||||
void gpiod_set_value_cansleep(struct gpio_desc *desc, int value)
|
||||
|
||||
Accessing such GPIOs requires a context which may sleep, for example a threaded
|
||||
IRQ handler, and those accessors must be used instead of spinlock-safe
|
||||
accessors without the cansleep() name suffix.
|
||||
|
||||
Other than the fact that these accessors might sleep, and will work on GPIOs
|
||||
that can't be accessed from hardIRQ handlers, these calls act the same as the
|
||||
spinlock-safe calls.
|
||||
|
||||
|
||||
Active-low State and Raw GPIO Values
|
||||
------------------------------------
|
||||
Device drivers like to manage the logical state of a GPIO, i.e. the value their
|
||||
device will actually receive, no matter what lies between it and the GPIO line.
|
||||
In some cases, it might make sense to control the actual GPIO line value. The
|
||||
following set of calls ignore the active-low property of a GPIO and work on the
|
||||
raw line value:
|
||||
|
||||
int gpiod_get_raw_value(const struct gpio_desc *desc)
|
||||
void gpiod_set_raw_value(struct gpio_desc *desc, int value)
|
||||
int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc)
|
||||
void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value)
|
||||
|
||||
The active-low state of a GPIO can also be queried using the following call:
|
||||
|
||||
int gpiod_is_active_low(const struct gpio_desc *desc)
|
||||
|
||||
Note that these functions should only be used with great moderation ; a driver
|
||||
should not have to care about the physical line level.
|
||||
|
||||
GPIOs mapped to IRQs
|
||||
--------------------
|
||||
GPIO lines can quite often be used as IRQs. You can get the IRQ number
|
||||
corresponding to a given GPIO using the following call:
|
||||
|
||||
int gpiod_to_irq(const struct gpio_desc *desc)
|
||||
|
||||
It will return an IRQ number, or an negative errno code if the mapping can't be
|
||||
done (most likely because that particular GPIO cannot be used as IRQ). It is an
|
||||
unchecked error to use a GPIO that wasn't set up as an input using
|
||||
gpiod_direction_input(), or to use an IRQ number that didn't originally come
|
||||
from gpiod_to_irq(). gpiod_to_irq() is not allowed to sleep.
|
||||
|
||||
Non-error values returned from gpiod_to_irq() can be passed to request_irq() or
|
||||
free_irq(). They will often be stored into IRQ resources for platform devices,
|
||||
by the board-specific initialization code. Note that IRQ trigger options are
|
||||
part of the IRQ interface, e.g. IRQF_TRIGGER_FALLING, as are system wakeup
|
||||
capabilities.
|
||||
|
||||
|
||||
Interacting With the Legacy GPIO Subsystem
|
||||
==========================================
|
||||
Many kernel subsystems still handle GPIOs using the legacy integer-based
|
||||
interface. Although it is strongly encouraged to upgrade them to the safer
|
||||
descriptor-based API, the following two functions allow you to convert a GPIO
|
||||
descriptor into the GPIO integer namespace and vice-versa:
|
||||
|
||||
int desc_to_gpio(const struct gpio_desc *desc)
|
||||
struct gpio_desc *gpio_to_desc(unsigned gpio)
|
||||
|
||||
The GPIO number returned by desc_to_gpio() can be safely used as long as the
|
||||
GPIO descriptor has not been freed. All the same, a GPIO number passed to
|
||||
gpio_to_desc() must have been properly acquired, and usage of the returned GPIO
|
||||
descriptor is only possible after the GPIO number has been released.
|
||||
|
||||
Freeing a GPIO obtained by one API with the other API is forbidden and an
|
||||
unchecked error.
|
||||
|
|
@ -0,0 +1,75 @@
|
|||
GPIO Descriptor Driver Interface
|
||||
================================
|
||||
|
||||
This document serves as a guide for GPIO chip drivers writers. Note that it
|
||||
describes the new descriptor-based interface. For a description of the
|
||||
deprecated integer-based GPIO interface please refer to gpio-legacy.txt.
|
||||
|
||||
Each GPIO controller driver needs to include the following header, which defines
|
||||
the structures used to define a GPIO driver:
|
||||
|
||||
#include <linux/gpio/driver.h>
|
||||
|
||||
|
||||
Internal Representation of GPIOs
|
||||
================================
|
||||
|
||||
Inside a GPIO driver, individual GPIOs are identified by their hardware number,
|
||||
which is a unique number between 0 and n, n being the number of GPIOs managed by
|
||||
the chip. This number is purely internal: the hardware number of a particular
|
||||
GPIO descriptor is never made visible outside of the driver.
|
||||
|
||||
On top of this internal number, each GPIO also need to have a global number in
|
||||
the integer GPIO namespace so that it can be used with the legacy GPIO
|
||||
interface. Each chip must thus have a "base" number (which can be automatically
|
||||
assigned), and for each GPIO the global number will be (base + hardware number).
|
||||
Although the integer representation is considered deprecated, it still has many
|
||||
users and thus needs to be maintained.
|
||||
|
||||
So for example one platform could use numbers 32-159 for GPIOs, with a
|
||||
controller defining 128 GPIOs at a "base" of 32 ; while another platform uses
|
||||
numbers 0..63 with one set of GPIO controllers, 64-79 with another type of GPIO
|
||||
controller, and on one particular board 80-95 with an FPGA. The numbers need not
|
||||
be contiguous; either of those platforms could also use numbers 2000-2063 to
|
||||
identify GPIOs in a bank of I2C GPIO expanders.
|
||||
|
||||
|
||||
Controller Drivers: gpio_chip
|
||||
=============================
|
||||
|
||||
In the gpiolib framework each GPIO controller is packaged as a "struct
|
||||
gpio_chip" (see linux/gpio/driver.h for its complete definition) with members
|
||||
common to each controller of that type:
|
||||
|
||||
- methods to establish GPIO direction
|
||||
- methods used to access GPIO values
|
||||
- method to return the IRQ number associated to a given GPIO
|
||||
- flag saying whether calls to its methods may sleep
|
||||
- optional debugfs dump method (showing extra state like pullup config)
|
||||
- optional base number (will be automatically assigned if omitted)
|
||||
- label for diagnostics and GPIOs mapping using platform data
|
||||
|
||||
The code implementing a gpio_chip should support multiple instances of the
|
||||
controller, possibly using the driver model. That code will configure each
|
||||
gpio_chip and issue gpiochip_add(). Removing a GPIO controller should be rare;
|
||||
use gpiochip_remove() when it is unavoidable.
|
||||
|
||||
Most often a gpio_chip is part of an instance-specific structure with state not
|
||||
exposed by the GPIO interfaces, such as addressing, power management, and more.
|
||||
Chips such as codecs will have complex non-GPIO state.
|
||||
|
||||
Any debugfs dump method should normally ignore signals which haven't been
|
||||
requested as GPIOs. They can use gpiochip_is_requested(), which returns either
|
||||
NULL or the label associated with that GPIO when it was requested.
|
||||
|
||||
Locking IRQ usage
|
||||
-----------------
|
||||
Input GPIOs can be used as IRQ signals. When this happens, a driver is requested
|
||||
to mark the GPIO as being used as an IRQ:
|
||||
|
||||
int gpiod_lock_as_irq(struct gpio_desc *desc)
|
||||
|
||||
This will prevent the use of non-irq related GPIO APIs until the GPIO IRQ lock
|
||||
is released:
|
||||
|
||||
void gpiod_unlock_as_irq(struct gpio_desc *desc)
|
||||
|
|
@ -0,0 +1,119 @@
|
|||
GPIO Interfaces
|
||||
===============
|
||||
|
||||
The documents in this directory give detailed instructions on how to access
|
||||
GPIOs in drivers, and how to write a driver for a device that provides GPIOs
|
||||
itself.
|
||||
|
||||
Due to the history of GPIO interfaces in the kernel, there are two different
|
||||
ways to obtain and use GPIOs:
|
||||
|
||||
- The descriptor-based interface is the preferred way to manipulate GPIOs,
|
||||
and is described by all the files in this directory excepted gpio-legacy.txt.
|
||||
- The legacy integer-based interface which is considered deprecated (but still
|
||||
usable for compatibility reasons) is documented in gpio-legacy.txt.
|
||||
|
||||
The remainder of this document applies to the new descriptor-based interface.
|
||||
gpio-legacy.txt contains the same information applied to the legacy
|
||||
integer-based interface.
|
||||
|
||||
|
||||
What is a GPIO?
|
||||
===============
|
||||
|
||||
A "General Purpose Input/Output" (GPIO) is a flexible software-controlled
|
||||
digital signal. They are provided from many kinds of chip, and are familiar
|
||||
to Linux developers working with embedded and custom hardware. Each GPIO
|
||||
represents a bit connected to a particular pin, or "ball" on Ball Grid Array
|
||||
(BGA) packages. Board schematics show which external hardware connects to
|
||||
which GPIOs. Drivers can be written generically, so that board setup code
|
||||
passes such pin configuration data to drivers.
|
||||
|
||||
System-on-Chip (SOC) processors heavily rely on GPIOs. In some cases, every
|
||||
non-dedicated pin can be configured as a GPIO; and most chips have at least
|
||||
several dozen of them. Programmable logic devices (like FPGAs) can easily
|
||||
provide GPIOs; multifunction chips like power managers, and audio codecs
|
||||
often have a few such pins to help with pin scarcity on SOCs; and there are
|
||||
also "GPIO Expander" chips that connect using the I2C or SPI serial buses.
|
||||
Most PC southbridges have a few dozen GPIO-capable pins (with only the BIOS
|
||||
firmware knowing how they're used).
|
||||
|
||||
The exact capabilities of GPIOs vary between systems. Common options:
|
||||
|
||||
- Output values are writable (high=1, low=0). Some chips also have
|
||||
options about how that value is driven, so that for example only one
|
||||
value might be driven, supporting "wire-OR" and similar schemes for the
|
||||
other value (notably, "open drain" signaling).
|
||||
|
||||
- Input values are likewise readable (1, 0). Some chips support readback
|
||||
of pins configured as "output", which is very useful in such "wire-OR"
|
||||
cases (to support bidirectional signaling). GPIO controllers may have
|
||||
input de-glitch/debounce logic, sometimes with software controls.
|
||||
|
||||
- Inputs can often be used as IRQ signals, often edge triggered but
|
||||
sometimes level triggered. Such IRQs may be configurable as system
|
||||
wakeup events, to wake the system from a low power state.
|
||||
|
||||
- Usually a GPIO will be configurable as either input or output, as needed
|
||||
by different product boards; single direction ones exist too.
|
||||
|
||||
- Most GPIOs can be accessed while holding spinlocks, but those accessed
|
||||
through a serial bus normally can't. Some systems support both types.
|
||||
|
||||
On a given board each GPIO is used for one specific purpose like monitoring
|
||||
MMC/SD card insertion/removal, detecting card write-protect status, driving
|
||||
a LED, configuring a transceiver, bit-banging a serial bus, poking a hardware
|
||||
watchdog, sensing a switch, and so on.
|
||||
|
||||
|
||||
Common GPIO Properties
|
||||
======================
|
||||
|
||||
These properties are met through all the other documents of the GPIO interface
|
||||
and it is useful to understand them, especially if you need to define GPIO
|
||||
mappings.
|
||||
|
||||
Active-High and Active-Low
|
||||
--------------------------
|
||||
It is natural to assume that a GPIO is "active" when its output signal is 1
|
||||
("high"), and inactive when it is 0 ("low"). However in practice the signal of a
|
||||
GPIO may be inverted before is reaches its destination, or a device could decide
|
||||
to have different conventions about what "active" means. Such decisions should
|
||||
be transparent to device drivers, therefore it is possible to define a GPIO as
|
||||
being either active-high ("1" means "active", the default) or active-low ("0"
|
||||
means "active") so that drivers only need to worry about the logical signal and
|
||||
not about what happens at the line level.
|
||||
|
||||
Open Drain and Open Source
|
||||
--------------------------
|
||||
Sometimes shared signals need to use "open drain" (where only the low signal
|
||||
level is actually driven), or "open source" (where only the high signal level is
|
||||
driven) signaling. That term applies to CMOS transistors; "open collector" is
|
||||
used for TTL. A pullup or pulldown resistor causes the high or low signal level.
|
||||
This is sometimes called a "wire-AND"; or more practically, from the negative
|
||||
logic (low=true) perspective this is a "wire-OR".
|
||||
|
||||
One common example of an open drain signal is a shared active-low IRQ line.
|
||||
Also, bidirectional data bus signals sometimes use open drain signals.
|
||||
|
||||
Some GPIO controllers directly support open drain and open source outputs; many
|
||||
don't. When you need open drain signaling but your hardware doesn't directly
|
||||
support it, there's a common idiom you can use to emulate it with any GPIO pin
|
||||
that can be used as either an input or an output:
|
||||
|
||||
LOW: gpiod_direction_output(gpio, 0) ... this drives the signal and overrides
|
||||
the pullup.
|
||||
|
||||
HIGH: gpiod_direction_input(gpio) ... this turns off the output, so the pullup
|
||||
(or some other device) controls the signal.
|
||||
|
||||
The same logic can be applied to emulate open source signaling, by driving the
|
||||
high signal and configuring the GPIO as input for low. This open drain/open
|
||||
source emulation can be handled transparently by the GPIO framework.
|
||||
|
||||
If you are "driving" the signal high but gpiod_get_value(gpio) reports a low
|
||||
value (after the appropriate rise time passes), you know some other component is
|
||||
driving the shared signal low. That's not necessarily an error. As one common
|
||||
example, that's how I2C clocks are stretched: a slave that needs a slower clock
|
||||
delays the rising edge of SCK, and the I2C master adjusts its signaling rate
|
||||
accordingly.
|
||||
|
|
@ -0,0 +1,155 @@
|
|||
GPIO Sysfs Interface for Userspace
|
||||
==================================
|
||||
|
||||
Platforms which use the "gpiolib" implementors framework may choose to
|
||||
configure a sysfs user interface to GPIOs. This is different from the
|
||||
debugfs interface, since it provides control over GPIO direction and
|
||||
value instead of just showing a gpio state summary. Plus, it could be
|
||||
present on production systems without debugging support.
|
||||
|
||||
Given appropriate hardware documentation for the system, userspace could
|
||||
know for example that GPIO #23 controls the write protect line used to
|
||||
protect boot loader segments in flash memory. System upgrade procedures
|
||||
may need to temporarily remove that protection, first importing a GPIO,
|
||||
then changing its output state, then updating the code before re-enabling
|
||||
the write protection. In normal use, GPIO #23 would never be touched,
|
||||
and the kernel would have no need to know about it.
|
||||
|
||||
Again depending on appropriate hardware documentation, on some systems
|
||||
userspace GPIO can be used to determine system configuration data that
|
||||
standard kernels won't know about. And for some tasks, simple userspace
|
||||
GPIO drivers could be all that the system really needs.
|
||||
|
||||
Note that standard kernel drivers exist for common "LEDs and Buttons"
|
||||
GPIO tasks: "leds-gpio" and "gpio_keys", respectively. Use those
|
||||
instead of talking directly to the GPIOs; they integrate with kernel
|
||||
frameworks better than your userspace code could.
|
||||
|
||||
|
||||
Paths in Sysfs
|
||||
--------------
|
||||
There are three kinds of entry in /sys/class/gpio:
|
||||
|
||||
- Control interfaces used to get userspace control over GPIOs;
|
||||
|
||||
- GPIOs themselves; and
|
||||
|
||||
- GPIO controllers ("gpio_chip" instances).
|
||||
|
||||
That's in addition to standard files including the "device" symlink.
|
||||
|
||||
The control interfaces are write-only:
|
||||
|
||||
/sys/class/gpio/
|
||||
|
||||
"export" ... Userspace may ask the kernel to export control of
|
||||
a GPIO to userspace by writing its number to this file.
|
||||
|
||||
Example: "echo 19 > export" will create a "gpio19" node
|
||||
for GPIO #19, if that's not requested by kernel code.
|
||||
|
||||
"unexport" ... Reverses the effect of exporting to userspace.
|
||||
|
||||
Example: "echo 19 > unexport" will remove a "gpio19"
|
||||
node exported using the "export" file.
|
||||
|
||||
GPIO signals have paths like /sys/class/gpio/gpio42/ (for GPIO #42)
|
||||
and have the following read/write attributes:
|
||||
|
||||
/sys/class/gpio/gpioN/
|
||||
|
||||
"direction" ... reads as either "in" or "out". This value may
|
||||
normally be written. Writing as "out" defaults to
|
||||
initializing the value as low. To ensure glitch free
|
||||
operation, values "low" and "high" may be written to
|
||||
configure the GPIO as an output with that initial value.
|
||||
|
||||
Note that this attribute *will not exist* if the kernel
|
||||
doesn't support changing the direction of a GPIO, or
|
||||
it was exported by kernel code that didn't explicitly
|
||||
allow userspace to reconfigure this GPIO's direction.
|
||||
|
||||
"value" ... reads as either 0 (low) or 1 (high). If the GPIO
|
||||
is configured as an output, this value may be written;
|
||||
any nonzero value is treated as high.
|
||||
|
||||
If the pin can be configured as interrupt-generating interrupt
|
||||
and if it has been configured to generate interrupts (see the
|
||||
description of "edge"), you can poll(2) on that file and
|
||||
poll(2) will return whenever the interrupt was triggered. If
|
||||
you use poll(2), set the events POLLPRI and POLLERR. If you
|
||||
use select(2), set the file descriptor in exceptfds. After
|
||||
poll(2) returns, either lseek(2) to the beginning of the sysfs
|
||||
file and read the new value or close the file and re-open it
|
||||
to read the value.
|
||||
|
||||
"edge" ... reads as either "none", "rising", "falling", or
|
||||
"both". Write these strings to select the signal edge(s)
|
||||
that will make poll(2) on the "value" file return.
|
||||
|
||||
This file exists only if the pin can be configured as an
|
||||
interrupt generating input pin.
|
||||
|
||||
"active_low" ... reads as either 0 (false) or 1 (true). Write
|
||||
any nonzero value to invert the value attribute both
|
||||
for reading and writing. Existing and subsequent
|
||||
poll(2) support configuration via the edge attribute
|
||||
for "rising" and "falling" edges will follow this
|
||||
setting.
|
||||
|
||||
GPIO controllers have paths like /sys/class/gpio/gpiochip42/ (for the
|
||||
controller implementing GPIOs starting at #42) and have the following
|
||||
read-only attributes:
|
||||
|
||||
/sys/class/gpio/gpiochipN/
|
||||
|
||||
"base" ... same as N, the first GPIO managed by this chip
|
||||
|
||||
"label" ... provided for diagnostics (not always unique)
|
||||
|
||||
"ngpio" ... how many GPIOs this manges (N to N + ngpio - 1)
|
||||
|
||||
Board documentation should in most cases cover what GPIOs are used for
|
||||
what purposes. However, those numbers are not always stable; GPIOs on
|
||||
a daughtercard might be different depending on the base board being used,
|
||||
or other cards in the stack. In such cases, you may need to use the
|
||||
gpiochip nodes (possibly in conjunction with schematics) to determine
|
||||
the correct GPIO number to use for a given signal.
|
||||
|
||||
|
||||
Exporting from Kernel code
|
||||
--------------------------
|
||||
Kernel code can explicitly manage exports of GPIOs which have already been
|
||||
requested using gpio_request():
|
||||
|
||||
/* export the GPIO to userspace */
|
||||
int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
|
||||
|
||||
/* reverse gpio_export() */
|
||||
void gpiod_unexport(struct gpio_desc *desc);
|
||||
|
||||
/* create a sysfs link to an exported GPIO node */
|
||||
int gpiod_export_link(struct device *dev, const char *name,
|
||||
struct gpio_desc *desc);
|
||||
|
||||
/* change the polarity of a GPIO node in sysfs */
|
||||
int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value);
|
||||
|
||||
After a kernel driver requests a GPIO, it may only be made available in
|
||||
the sysfs interface by gpiod_export(). The driver can control whether the
|
||||
signal direction may change. This helps drivers prevent userspace code
|
||||
from accidentally clobbering important system state.
|
||||
|
||||
This explicit exporting can help with debugging (by making some kinds
|
||||
of experiments easier), or can provide an always-there interface that's
|
||||
suitable for documenting as part of a board support package.
|
||||
|
||||
After the GPIO has been exported, gpiod_export_link() allows creating
|
||||
symlinks from elsewhere in sysfs to the GPIO sysfs node. Drivers can
|
||||
use this to provide the interface under their own device in sysfs with
|
||||
a descriptive name.
|
||||
|
||||
Drivers can use gpiod_sysfs_set_active_low() to hide GPIO line polarity
|
||||
differences between boards from user space. Polarity change can be done both
|
||||
before and after gpiod_export(), and previously enabled poll(2) support for
|
||||
either rising or falling edge will be reconfigured to follow this setting.
|
||||
|
|
@ -313,7 +313,7 @@ static struct mic_device_desc *get_device_desc(struct mic_info *mic, int type)
|
|||
int i;
|
||||
void *dp = get_dp(mic, type);
|
||||
|
||||
for (i = mic_aligned_size(struct mic_bootparam); i < PAGE_SIZE;
|
||||
for (i = sizeof(struct mic_bootparam); i < PAGE_SIZE;
|
||||
i += mic_total_desc_size(d)) {
|
||||
d = dp + i;
|
||||
|
||||
|
|
@ -445,8 +445,8 @@ init_vr(struct mic_info *mic, int fd, int type,
|
|||
__func__, mic->name, vr0->va, vr0->info, vr_size,
|
||||
vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN));
|
||||
mpsslog("magic 0x%x expected 0x%x\n",
|
||||
vr0->info->magic, MIC_MAGIC + type);
|
||||
assert(vr0->info->magic == MIC_MAGIC + type);
|
||||
le32toh(vr0->info->magic), MIC_MAGIC + type);
|
||||
assert(le32toh(vr0->info->magic) == MIC_MAGIC + type);
|
||||
if (vr1) {
|
||||
vr1->va = (struct mic_vring *)
|
||||
&va[MIC_DEVICE_PAGE_END + vr_size];
|
||||
|
|
@ -458,8 +458,8 @@ init_vr(struct mic_info *mic, int fd, int type,
|
|||
__func__, mic->name, vr1->va, vr1->info, vr_size,
|
||||
vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN));
|
||||
mpsslog("magic 0x%x expected 0x%x\n",
|
||||
vr1->info->magic, MIC_MAGIC + type + 1);
|
||||
assert(vr1->info->magic == MIC_MAGIC + type + 1);
|
||||
le32toh(vr1->info->magic), MIC_MAGIC + type + 1);
|
||||
assert(le32toh(vr1->info->magic) == MIC_MAGIC + type + 1);
|
||||
}
|
||||
done:
|
||||
return va;
|
||||
|
|
@ -520,7 +520,7 @@ static void *
|
|||
virtio_net(void *arg)
|
||||
{
|
||||
static __u8 vnet_hdr[2][sizeof(struct virtio_net_hdr)];
|
||||
static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __aligned(64);
|
||||
static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __attribute__ ((aligned(64)));
|
||||
struct iovec vnet_iov[2][2] = {
|
||||
{ { .iov_base = vnet_hdr[0], .iov_len = sizeof(vnet_hdr[0]) },
|
||||
{ .iov_base = vnet_buf[0], .iov_len = sizeof(vnet_buf[0]) } },
|
||||
|
|
@ -1412,6 +1412,12 @@ mic_config(void *arg)
|
|||
}
|
||||
|
||||
do {
|
||||
ret = lseek(fd, 0, SEEK_SET);
|
||||
if (ret < 0) {
|
||||
mpsslog("%s: Failed to seek to file start '%s': %s\n",
|
||||
mic->name, pathname, strerror(errno));
|
||||
goto close_error1;
|
||||
}
|
||||
ret = read(fd, value, sizeof(value));
|
||||
if (ret < 0) {
|
||||
mpsslog("%s: Failed to read sysfs entry '%s': %s\n",
|
||||
|
|
|
|||
|
|
@ -123,6 +123,16 @@ Transmission process is similar to capture as shown below.
|
|||
[shutdown] close() --------> destruction of the transmission socket and
|
||||
deallocation of all associated resources.
|
||||
|
||||
Socket creation and destruction is also straight forward, and is done
|
||||
the same way as in capturing described in the previous paragraph:
|
||||
|
||||
int fd = socket(PF_PACKET, mode, 0);
|
||||
|
||||
The protocol can optionally be 0 in case we only want to transmit
|
||||
via this socket, which avoids an expensive call to packet_rcv().
|
||||
In this case, you also need to bind(2) the TX_RING with sll_protocol = 0
|
||||
set. Otherwise, htons(ETH_P_ALL) or any other protocol, for example.
|
||||
|
||||
Binding the socket to your network interface is mandatory (with zero copy) to
|
||||
know the header size of frames used in the circular buffer.
|
||||
|
||||
|
|
|
|||
82
MAINTAINERS
82
MAINTAINERS
|
|
@ -893,19 +893,14 @@ F: arch/arm/include/asm/hardware/dec21285.h
|
|||
F: arch/arm/mach-footbridge/
|
||||
|
||||
ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
|
||||
M: Shawn Guo <shawn.guo@linaro.org>
|
||||
M: Sascha Hauer <kernel@pengutronix.de>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Maintained
|
||||
T: git git://git.pengutronix.de/git/imx/linux-2.6.git
|
||||
F: arch/arm/mach-imx/
|
||||
F: arch/arm/configs/imx*_defconfig
|
||||
|
||||
ARM/FREESCALE IMX6
|
||||
M: Shawn Guo <shawn.guo@linaro.org>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Maintained
|
||||
T: git git://git.linaro.org/people/shawnguo/linux-2.6.git
|
||||
F: arch/arm/mach-imx/*imx6*
|
||||
F: arch/arm/mach-imx/
|
||||
F: arch/arm/boot/dts/imx*
|
||||
F: arch/arm/configs/imx*_defconfig
|
||||
|
||||
ARM/FREESCALE MXS ARM ARCHITECTURE
|
||||
M: Shawn Guo <shawn.guo@linaro.org>
|
||||
|
|
@ -1934,7 +1929,8 @@ S: Maintained
|
|||
F: drivers/gpio/gpio-bt8xx.c
|
||||
|
||||
BTRFS FILE SYSTEM
|
||||
M: Chris Mason <chris.mason@fusionio.com>
|
||||
M: Chris Mason <clm@fb.com>
|
||||
M: Josef Bacik <jbacik@fb.com>
|
||||
L: linux-btrfs@vger.kernel.org
|
||||
W: http://btrfs.wiki.kernel.org/
|
||||
Q: http://patchwork.kernel.org/project/linux-btrfs/list/
|
||||
|
|
@ -2137,11 +2133,17 @@ S: Maintained
|
|||
F: Documentation/zh_CN/
|
||||
|
||||
CHIPIDEA USB HIGH SPEED DUAL ROLE CONTROLLER
|
||||
M: Alexander Shishkin <alexander.shishkin@linux.intel.com>
|
||||
M: Peter Chen <Peter.Chen@freescale.com>
|
||||
T: git://github.com/hzpeterchen/linux-usb.git
|
||||
L: linux-usb@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/usb/chipidea/
|
||||
|
||||
CHROME HARDWARE PLATFORM SUPPORT
|
||||
M: Olof Johansson <olof@lixom.net>
|
||||
S: Maintained
|
||||
F: drivers/platform/chrome/
|
||||
|
||||
CISCO VIC ETHERNET NIC DRIVER
|
||||
M: Christian Benvenuti <benve@cisco.com>
|
||||
M: Sujith Sankar <ssujith@cisco.com>
|
||||
|
|
@ -4038,12 +4040,26 @@ W: http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi
|
|||
S: Maintained
|
||||
F: fs/hpfs/
|
||||
|
||||
HSI SUBSYSTEM
|
||||
M: Sebastian Reichel <sre@debian.org>
|
||||
S: Maintained
|
||||
F: Documentation/ABI/testing/sysfs-bus-hsi
|
||||
F: drivers/hsi/
|
||||
F: include/linux/hsi/
|
||||
F: include/uapi/linux/hsi/
|
||||
|
||||
HSO 3G MODEM DRIVER
|
||||
M: Jan Dumon <j.dumon@option.com>
|
||||
W: http://www.pharscape.org
|
||||
S: Maintained
|
||||
F: drivers/net/usb/hso.c
|
||||
|
||||
HSR NETWORK PROTOCOL
|
||||
M: Arvid Brodin <arvid.brodin@alten.se>
|
||||
L: netdev@vger.kernel.org
|
||||
S: Maintained
|
||||
F: net/hsr/
|
||||
|
||||
HTCPEN TOUCHSCREEN DRIVER
|
||||
M: Pau Oliva Fora <pof@eslack.org>
|
||||
L: linux-input@vger.kernel.org
|
||||
|
|
@ -4450,10 +4466,8 @@ M: Bruce Allan <bruce.w.allan@intel.com>
|
|||
M: Carolyn Wyborny <carolyn.wyborny@intel.com>
|
||||
M: Don Skidmore <donald.c.skidmore@intel.com>
|
||||
M: Greg Rose <gregory.v.rose@intel.com>
|
||||
M: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
|
||||
M: Alex Duyck <alexander.h.duyck@intel.com>
|
||||
M: John Ronciak <john.ronciak@intel.com>
|
||||
M: Tushar Dave <tushar.n.dave@intel.com>
|
||||
L: e1000-devel@lists.sourceforge.net
|
||||
W: http://www.intel.com/support/feedback.htm
|
||||
W: http://e1000.sourceforge.net/
|
||||
|
|
@ -5256,7 +5270,7 @@ S: Maintained
|
|||
F: Documentation/lockdep*.txt
|
||||
F: Documentation/lockstat.txt
|
||||
F: include/linux/lockdep.h
|
||||
F: kernel/lockdep*
|
||||
F: kernel/locking/
|
||||
|
||||
LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP/Vista Dynamic Disks)
|
||||
M: "Richard Russon (FlatCap)" <ldm@flatcap.org>
|
||||
|
|
@ -5968,10 +5982,10 @@ F: drivers/nfc/
|
|||
F: include/linux/platform_data/pn544.h
|
||||
|
||||
NFS, SUNRPC, AND LOCKD CLIENTS
|
||||
M: Trond Myklebust <Trond.Myklebust@netapp.com>
|
||||
M: Trond Myklebust <trond.myklebust@primarydata.com>
|
||||
L: linux-nfs@vger.kernel.org
|
||||
W: http://client.linux-nfs.org
|
||||
T: git git://git.linux-nfs.org/pub/linux/nfs-2.6.git
|
||||
T: git git://git.linux-nfs.org/projects/trondmy/linux-nfs.git
|
||||
S: Maintained
|
||||
F: fs/lockd/
|
||||
F: fs/nfs/
|
||||
|
|
@ -6238,8 +6252,8 @@ OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
|
|||
M: Rob Herring <rob.herring@calxeda.com>
|
||||
M: Pawel Moll <pawel.moll@arm.com>
|
||||
M: Mark Rutland <mark.rutland@arm.com>
|
||||
M: Stephen Warren <swarren@wwwdotorg.org>
|
||||
M: Ian Campbell <ijc+devicetree@hellion.org.uk>
|
||||
M: Kumar Gala <galak@codeaurora.org>
|
||||
L: devicetree@vger.kernel.org
|
||||
S: Maintained
|
||||
F: Documentation/devicetree/
|
||||
|
|
@ -6449,19 +6463,52 @@ F: drivers/pci/
|
|||
F: include/linux/pci*
|
||||
F: arch/x86/pci/
|
||||
|
||||
PCI DRIVER FOR IMX6
|
||||
M: Richard Zhu <r65037@freescale.com>
|
||||
M: Shawn Guo <shawn.guo@linaro.org>
|
||||
L: linux-pci@vger.kernel.org
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Maintained
|
||||
F: drivers/pci/host/*imx6*
|
||||
|
||||
PCI DRIVER FOR MVEBU (Marvell Armada 370 and Armada XP SOC support)
|
||||
M: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
||||
M: Jason Cooper <jason@lakedaemon.net>
|
||||
L: linux-pci@vger.kernel.org
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Maintained
|
||||
F: drivers/pci/host/*mvebu*
|
||||
|
||||
PCI DRIVER FOR NVIDIA TEGRA
|
||||
M: Thierry Reding <thierry.reding@gmail.com>
|
||||
L: linux-tegra@vger.kernel.org
|
||||
L: linux-pci@vger.kernel.org
|
||||
S: Supported
|
||||
F: Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
|
||||
F: drivers/pci/host/pci-tegra.c
|
||||
|
||||
PCI DRIVER FOR RENESAS R-CAR
|
||||
M: Simon Horman <horms@verge.net.au>
|
||||
L: linux-pci@vger.kernel.org
|
||||
L: linux-sh@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/pci/host/*rcar*
|
||||
|
||||
PCI DRIVER FOR SAMSUNG EXYNOS
|
||||
M: Jingoo Han <jg1.han@samsung.com>
|
||||
L: linux-pci@vger.kernel.org
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
|
||||
S: Maintained
|
||||
F: drivers/pci/host/pci-exynos.c
|
||||
|
||||
PCI DRIVER FOR SYNOPSIS DESIGNWARE
|
||||
M: Mohit Kumar <mohit.kumar@st.com>
|
||||
M: Jingoo Han <jg1.han@samsung.com>
|
||||
L: linux-pci@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/pci/host/*designware*
|
||||
|
||||
PCMCIA SUBSYSTEM
|
||||
P: Linux PCMCIA Team
|
||||
L: linux-pcmcia@lists.infradead.org
|
||||
|
|
@ -7380,7 +7427,6 @@ S: Maintained
|
|||
F: kernel/sched/
|
||||
F: include/linux/sched.h
|
||||
F: include/uapi/linux/sched.h
|
||||
F: kernel/wait.c
|
||||
F: include/linux/wait.h
|
||||
|
||||
SCORE ARCHITECTURE
|
||||
|
|
|
|||
2
Makefile
2
Makefile
|
|
@ -1,7 +1,7 @@
|
|||
VERSION = 3
|
||||
PATCHLEVEL = 13
|
||||
SUBLEVEL = 0
|
||||
EXTRAVERSION = -rc1
|
||||
EXTRAVERSION = -rc4
|
||||
NAME = One Giant Leap for Frogkind
|
||||
|
||||
# *DOCUMENTATION*
|
||||
|
|
|
|||
|
|
@ -8,6 +8,7 @@
|
|||
|
||||
config ARC
|
||||
def_bool y
|
||||
select BUILDTIME_EXTABLE_SORT
|
||||
select CLONE_BACKWARDS
|
||||
# ARC Busybox based initramfs absolutely relies on DEVTMPFS for /dev
|
||||
select DEVTMPFS if !INITRAMFS_SOURCE=""
|
||||
|
|
|
|||
|
|
@ -8,6 +8,9 @@
|
|||
|
||||
/******** no-legacy-syscalls-ABI *******/
|
||||
|
||||
#ifndef _UAPI_ASM_ARC_UNISTD_H
|
||||
#define _UAPI_ASM_ARC_UNISTD_H
|
||||
|
||||
#define __ARCH_WANT_SYS_EXECVE
|
||||
#define __ARCH_WANT_SYS_CLONE
|
||||
#define __ARCH_WANT_SYS_VFORK
|
||||
|
|
@ -32,3 +35,5 @@ __SYSCALL(__NR_arc_gettls, sys_arc_gettls)
|
|||
/* Generic syscall (fs/filesystems.c - lost in asm-generic/unistd.h */
|
||||
#define __NR_sysfs (__NR_arch_specific_syscall + 3)
|
||||
__SYSCALL(__NR_sysfs, sys_sysfs)
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -79,9 +79,9 @@ static int arc_pmu_cache_event(u64 config)
|
|||
cache_result = (config >> 16) & 0xff;
|
||||
if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
|
||||
return -EINVAL;
|
||||
if (cache_type >= PERF_COUNT_HW_CACHE_OP_MAX)
|
||||
if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
|
||||
return -EINVAL;
|
||||
if (cache_type >= PERF_COUNT_HW_CACHE_RESULT_MAX)
|
||||
if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
|
||||
return -EINVAL;
|
||||
|
||||
ret = arc_pmu_cache_map[cache_type][cache_op][cache_result];
|
||||
|
|
|
|||
|
|
@ -13,4 +13,83 @@
|
|||
/ {
|
||||
model = "IGEP COM AM335x on AQUILA Expansion";
|
||||
compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx";
|
||||
|
||||
hdmi {
|
||||
compatible = "ti,tilcdc,slave";
|
||||
i2c = <&i2c0>;
|
||||
pinctrl-names = "default", "off";
|
||||
pinctrl-0 = <&nxp_hdmi_pins>;
|
||||
pinctrl-1 = <&nxp_hdmi_off_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
leds_base {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&leds_base_pins>;
|
||||
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led@0 {
|
||||
label = "base:red:user";
|
||||
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; /* gpio1_21 */
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@1 {
|
||||
label = "base:green:user";
|
||||
gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; /* gpio2_0 */
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&am33xx_pinmux {
|
||||
nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
|
||||
0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */
|
||||
0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */
|
||||
0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */
|
||||
0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */
|
||||
0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */
|
||||
0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */
|
||||
0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */
|
||||
0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */
|
||||
0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */
|
||||
0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */
|
||||
0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */
|
||||
0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */
|
||||
0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */
|
||||
0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */
|
||||
0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */
|
||||
0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */
|
||||
0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */
|
||||
0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */
|
||||
0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */
|
||||
0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */
|
||||
>;
|
||||
};
|
||||
nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
|
||||
>;
|
||||
};
|
||||
|
||||
leds_base_pins: pinmux_leds_base_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
|
||||
0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&lcdc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
eeprom: eeprom@50 {
|
||||
compatible = "at,24c256";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -199,6 +199,35 @@
|
|||
pinctrl-0 = <&uart0_pins>;
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
|
||||
control@44e10000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb-phy@47401300 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb-phy@47401b00 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb@47401000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb@47401800 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
dma-controller@07402000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
#include "tps65910.dtsi"
|
||||
|
||||
&tps {
|
||||
|
|
|
|||
|
|
@ -7,11 +7,11 @@
|
|||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "omap34xx.dtsi"
|
||||
#include "am3517.dtsi"
|
||||
|
||||
/ {
|
||||
model = "TI AM3517 EVM (AM3517/05)";
|
||||
compatible = "ti,am3517-evm", "ti,omap3";
|
||||
model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
|
||||
compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
|
|
|
|||
|
|
@ -0,0 +1,63 @@
|
|||
/*
|
||||
* Device Tree Source for am3517 SoC
|
||||
*
|
||||
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public License
|
||||
* version 2. This program is licensed "as is" without any warranty of any
|
||||
* kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#include "omap3.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
serial3 = &uart4;
|
||||
};
|
||||
|
||||
ocp {
|
||||
am35x_otg_hs: am35x_otg_hs@5c040000 {
|
||||
compatible = "ti,omap3-musb";
|
||||
ti,hwmods = "am35x_otg_hs";
|
||||
status = "disabled";
|
||||
reg = <0x5c040000 0x1000>;
|
||||
interrupts = <71>;
|
||||
interrupt-names = "mc";
|
||||
};
|
||||
|
||||
davinci_emac: ethernet@0x5c000000 {
|
||||
compatible = "ti,am3517-emac";
|
||||
ti,hwmods = "davinci_emac";
|
||||
status = "disabled";
|
||||
reg = <0x5c000000 0x30000>;
|
||||
interrupts = <67 68 69 70>;
|
||||
ti,davinci-ctrl-reg-offset = <0x10000>;
|
||||
ti,davinci-ctrl-mod-reg-offset = <0>;
|
||||
ti,davinci-ctrl-ram-offset = <0x20000>;
|
||||
ti,davinci-ctrl-ram-size = <0x2000>;
|
||||
ti,davinci-rmii-en = /bits/ 8 <1>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
};
|
||||
|
||||
davinci_mdio: ethernet@0x5c030000 {
|
||||
compatible = "ti,davinci_mdio";
|
||||
ti,hwmods = "davinci_mdio";
|
||||
status = "disabled";
|
||||
reg = <0x5c030000 0x1000>;
|
||||
bus_freq = <1000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
uart4: serial@4809e000 {
|
||||
compatible = "ti,omap3-uart";
|
||||
ti,hwmods = "uart4";
|
||||
status = "disabled";
|
||||
reg = <0x4809e000 0x400>;
|
||||
interrupts = <84>;
|
||||
dmas = <&sdma 55 &sdma 54>;
|
||||
dma-names = "tx", "rx";
|
||||
clock-frequency = <48000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -99,6 +99,7 @@
|
|||
spi-max-frequency = <50000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pcie-controller {
|
||||
status = "okay";
|
||||
|
|
@ -117,5 +118,4 @@
|
|||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -118,7 +118,7 @@
|
|||
|
||||
coherency-fabric@20200 {
|
||||
compatible = "marvell,coherency-fabric";
|
||||
reg = <0x20200 0xb0>, <0x21810 0x1c>;
|
||||
reg = <0x20200 0xb0>, <0x21010 0x1c>;
|
||||
};
|
||||
|
||||
serial@12000 {
|
||||
|
|
|
|||
|
|
@ -47,7 +47,7 @@
|
|||
/*
|
||||
* MV78230 has 2 PCIe units Gen2.0: One unit can be
|
||||
* configured as x4 or quad x1 lanes. One unit is
|
||||
* x4/x1.
|
||||
* x1 only.
|
||||
*/
|
||||
pcie-controller {
|
||||
compatible = "marvell,armada-xp-pcie";
|
||||
|
|
@ -62,10 +62,10 @@
|
|||
|
||||
ranges =
|
||||
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
|
||||
0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
|
||||
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
|
||||
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
|
||||
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
|
||||
0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
|
||||
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
|
||||
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
|
||||
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
|
||||
|
|
@ -74,8 +74,8 @@
|
|||
0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
|
||||
0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
|
||||
0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
|
||||
0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
|
||||
0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>;
|
||||
0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
|
||||
0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>;
|
||||
|
||||
pcie@1,0 {
|
||||
device_type = "pci";
|
||||
|
|
@ -145,20 +145,20 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie@9,0 {
|
||||
pcie@5,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
|
||||
reg = <0x4800 0 0 0 0>;
|
||||
assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
|
||||
reg = <0x2800 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
|
||||
0x81000000 0 0 0x81000000 0x9 0 1 0>;
|
||||
ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
|
||||
0x81000000 0 0 0x81000000 0x5 0 1 0>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &mpic 99>;
|
||||
marvell,pcie-port = <2>;
|
||||
interrupt-map = <0 0 0 0 &mpic 62>;
|
||||
marvell,pcie-port = <1>;
|
||||
marvell,pcie-lane = <0>;
|
||||
clocks = <&gateclk 26>;
|
||||
clocks = <&gateclk 9>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -48,7 +48,7 @@
|
|||
/*
|
||||
* MV78260 has 3 PCIe units Gen2.0: Two units can be
|
||||
* configured as x4 or quad x1 lanes. One unit is
|
||||
* x4/x1.
|
||||
* x4 only.
|
||||
*/
|
||||
pcie-controller {
|
||||
compatible = "marvell,armada-xp-pcie";
|
||||
|
|
@ -68,7 +68,9 @@
|
|||
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
|
||||
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
|
||||
0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
|
||||
0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */
|
||||
0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */
|
||||
0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */
|
||||
0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */
|
||||
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
|
||||
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
|
||||
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
|
||||
|
|
@ -77,10 +79,18 @@
|
|||
0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
|
||||
0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
|
||||
0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
|
||||
0x82000000 0x9 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
|
||||
0x81000000 0x9 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
|
||||
0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
|
||||
0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>;
|
||||
|
||||
0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
|
||||
0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
|
||||
0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
|
||||
0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */
|
||||
0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
|
||||
0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */
|
||||
0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
|
||||
0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */
|
||||
|
||||
0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
|
||||
0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>;
|
||||
|
||||
pcie@1,0 {
|
||||
device_type = "pci";
|
||||
|
|
@ -150,6 +160,74 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie@5,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
|
||||
reg = <0x2800 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
|
||||
0x81000000 0 0 0x81000000 0x5 0 1 0>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &mpic 62>;
|
||||
marvell,pcie-port = <1>;
|
||||
marvell,pcie-lane = <0>;
|
||||
clocks = <&gateclk 9>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie@6,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
|
||||
reg = <0x3000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
|
||||
0x81000000 0 0 0x81000000 0x6 0 1 0>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &mpic 63>;
|
||||
marvell,pcie-port = <1>;
|
||||
marvell,pcie-lane = <1>;
|
||||
clocks = <&gateclk 10>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie@7,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
|
||||
reg = <0x3800 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
|
||||
0x81000000 0 0 0x81000000 0x7 0 1 0>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &mpic 64>;
|
||||
marvell,pcie-port = <1>;
|
||||
marvell,pcie-lane = <2>;
|
||||
clocks = <&gateclk 11>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie@8,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
|
||||
reg = <0x4000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
|
||||
0x81000000 0 0 0x81000000 0x8 0 1 0>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &mpic 65>;
|
||||
marvell,pcie-port = <1>;
|
||||
marvell,pcie-lane = <3>;
|
||||
clocks = <&gateclk 12>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie@9,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
|
||||
|
|
@ -166,23 +244,6 @@
|
|||
clocks = <&gateclk 26>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie@10,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
|
||||
reg = <0x5000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
|
||||
0x81000000 0 0 0x81000000 0xa 0 1 0>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &mpic 103>;
|
||||
marvell,pcie-port = <3>;
|
||||
marvell,pcie-lane = <0>;
|
||||
clocks = <&gateclk 27>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
internal-regs {
|
||||
|
|
|
|||
|
|
@ -11,6 +11,10 @@
|
|||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
serial4 = &usart3;
|
||||
};
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
pinctrl@fffff400 {
|
||||
|
|
|
|||
|
|
@ -85,6 +85,8 @@
|
|||
reg = <0x7e205000 0x1000>;
|
||||
interrupts = <2 21>;
|
||||
clocks = <&clk_i2c>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -93,6 +95,8 @@
|
|||
reg = <0x7e804000 0x1000>;
|
||||
interrupts = <2 21>;
|
||||
clocks = <&clk_i2c>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -27,6 +27,13 @@
|
|||
i2c2_bus: i2c2-bus {
|
||||
samsung,pin-pud = <0>;
|
||||
};
|
||||
|
||||
max77686_irq: max77686-irq {
|
||||
samsung,pins = "gpx3-2";
|
||||
samsung,pin-function = <0>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@12C60000 {
|
||||
|
|
@ -35,6 +42,11 @@
|
|||
|
||||
max77686@09 {
|
||||
compatible = "maxim,max77686";
|
||||
interrupt-parent = <&gpx3>;
|
||||
interrupts = <2 0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&max77686_irq>;
|
||||
wakeup-source;
|
||||
reg = <0x09>;
|
||||
|
||||
voltage-regulators {
|
||||
|
|
|
|||
|
|
@ -161,7 +161,7 @@
|
|||
clocks = <&clks 197>, <&clks 3>,
|
||||
<&clks 197>, <&clks 107>,
|
||||
<&clks 0>, <&clks 118>,
|
||||
<&clks 62>, <&clks 139>,
|
||||
<&clks 0>, <&clks 139>,
|
||||
<&clks 0>;
|
||||
clock-names = "core", "rxtx0",
|
||||
"rxtx1", "rxtx2",
|
||||
|
|
|
|||
|
|
@ -44,8 +44,8 @@
|
|||
gpmc,wr-access-ns = <186>;
|
||||
gpmc,cycle2cycle-samecsen;
|
||||
gpmc,cycle2cycle-diffcsen;
|
||||
vmmc-supply = <&vddvario>;
|
||||
vmmc_aux-supply = <&vdd33a>;
|
||||
vddvario-supply = <&vddvario>;
|
||||
vdd33a-supply = <&vdd33a>;
|
||||
reg-io-width = <4>;
|
||||
smsc,save-mac-address;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -13,7 +13,7 @@
|
|||
* they probably share the same GPIO IRQ
|
||||
* REVISIT: Add timing support from slls644g.pdf
|
||||
*/
|
||||
8250@3,0 {
|
||||
uart@3,0 {
|
||||
compatible = "ns16550a";
|
||||
reg = <3 0 0x100>;
|
||||
bank-width = <2>;
|
||||
|
|
|
|||
|
|
@ -9,6 +9,7 @@
|
|||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/pinctrl/omap.h>
|
||||
|
||||
#include "skeleton.dtsi"
|
||||
|
|
@ -21,6 +22,8 @@
|
|||
serial0 = &uart1;
|
||||
serial1 = &uart2;
|
||||
serial2 = &uart3;
|
||||
i2c0 = &i2c1;
|
||||
i2c1 = &i2c2;
|
||||
};
|
||||
|
||||
cpus {
|
||||
|
|
@ -53,6 +56,28 @@
|
|||
ranges;
|
||||
ti,hwmods = "l3_main";
|
||||
|
||||
aes: aes@480a6000 {
|
||||
compatible = "ti,omap2-aes";
|
||||
ti,hwmods = "aes";
|
||||
reg = <0x480a6000 0x50>;
|
||||
dmas = <&sdma 9 &sdma 10>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
hdq1w: 1w@480b2000 {
|
||||
compatible = "ti,omap2420-1w";
|
||||
ti,hwmods = "hdq1w";
|
||||
reg = <0x480b2000 0x1000>;
|
||||
interrupts = <58>;
|
||||
};
|
||||
|
||||
mailbox: mailbox@48094000 {
|
||||
compatible = "ti,omap2-mailbox";
|
||||
ti,hwmods = "mailbox";
|
||||
reg = <0x48094000 0x200>;
|
||||
interrupts = <26>;
|
||||
};
|
||||
|
||||
intc: interrupt-controller@1 {
|
||||
compatible = "ti,omap2-intc";
|
||||
interrupt-controller;
|
||||
|
|
@ -63,6 +88,7 @@
|
|||
|
||||
sdma: dma-controller@48056000 {
|
||||
compatible = "ti,omap2430-sdma", "ti,omap2420-sdma";
|
||||
ti,hwmods = "dma";
|
||||
reg = <0x48056000 0x1000>;
|
||||
interrupts = <12>,
|
||||
<13>,
|
||||
|
|
@ -73,21 +99,91 @@
|
|||
#dma-requests = <64>;
|
||||
};
|
||||
|
||||
i2c1: i2c@48070000 {
|
||||
compatible = "ti,omap2-i2c";
|
||||
ti,hwmods = "i2c1";
|
||||
reg = <0x48070000 0x80>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <56>;
|
||||
dmas = <&sdma 27 &sdma 28>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
i2c2: i2c@48072000 {
|
||||
compatible = "ti,omap2-i2c";
|
||||
ti,hwmods = "i2c2";
|
||||
reg = <0x48072000 0x80>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <57>;
|
||||
dmas = <&sdma 29 &sdma 30>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
mcspi1: mcspi@48098000 {
|
||||
compatible = "ti,omap2-mcspi";
|
||||
ti,hwmods = "mcspi1";
|
||||
reg = <0x48098000 0x100>;
|
||||
interrupts = <65>;
|
||||
dmas = <&sdma 35 &sdma 36 &sdma 37 &sdma 38
|
||||
&sdma 39 &sdma 40 &sdma 41 &sdma 42>;
|
||||
dma-names = "tx0", "rx0", "tx1", "rx1",
|
||||
"tx2", "rx2", "tx3", "rx3";
|
||||
};
|
||||
|
||||
mcspi2: mcspi@4809a000 {
|
||||
compatible = "ti,omap2-mcspi";
|
||||
ti,hwmods = "mcspi2";
|
||||
reg = <0x4809a000 0x100>;
|
||||
interrupts = <66>;
|
||||
dmas = <&sdma 43 &sdma 44 &sdma 45 &sdma 46>;
|
||||
dma-names = "tx0", "rx0", "tx1", "rx1";
|
||||
};
|
||||
|
||||
rng: rng@480a0000 {
|
||||
compatible = "ti,omap2-rng";
|
||||
ti,hwmods = "rng";
|
||||
reg = <0x480a0000 0x50>;
|
||||
interrupts = <36>;
|
||||
};
|
||||
|
||||
sham: sham@480a4000 {
|
||||
compatible = "ti,omap2-sham";
|
||||
ti,hwmods = "sham";
|
||||
reg = <0x480a4000 0x64>;
|
||||
interrupts = <51>;
|
||||
dmas = <&sdma 13>;
|
||||
dma-names = "rx";
|
||||
};
|
||||
|
||||
uart1: serial@4806a000 {
|
||||
compatible = "ti,omap2-uart";
|
||||
ti,hwmods = "uart1";
|
||||
reg = <0x4806a000 0x2000>;
|
||||
interrupts = <72>;
|
||||
dmas = <&sdma 49 &sdma 50>;
|
||||
dma-names = "tx", "rx";
|
||||
clock-frequency = <48000000>;
|
||||
};
|
||||
|
||||
uart2: serial@4806c000 {
|
||||
compatible = "ti,omap2-uart";
|
||||
ti,hwmods = "uart2";
|
||||
reg = <0x4806c000 0x400>;
|
||||
interrupts = <73>;
|
||||
dmas = <&sdma 51 &sdma 52>;
|
||||
dma-names = "tx", "rx";
|
||||
clock-frequency = <48000000>;
|
||||
};
|
||||
|
||||
uart3: serial@4806e000 {
|
||||
compatible = "ti,omap2-uart";
|
||||
ti,hwmods = "uart3";
|
||||
reg = <0x4806e000 0x400>;
|
||||
interrupts = <74>;
|
||||
dmas = <&sdma 53 &sdma 54>;
|
||||
dma-names = "tx", "rx";
|
||||
clock-frequency = <48000000>;
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -114,6 +114,15 @@
|
|||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
msdi1: mmc@4809c000 {
|
||||
compatible = "ti,omap2420-mmc";
|
||||
ti,hwmods = "msdi1";
|
||||
reg = <0x4809c000 0x80>;
|
||||
interrupts = <83>;
|
||||
dmas = <&sdma 61 &sdma 62>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
timer1: timer@48028000 {
|
||||
compatible = "ti,omap2420-timer";
|
||||
reg = <0x48028000 0x400>;
|
||||
|
|
@ -121,5 +130,19 @@
|
|||
ti,hwmods = "timer1";
|
||||
ti,timer-alwon;
|
||||
};
|
||||
|
||||
wd_timer2: wdt@48022000 {
|
||||
compatible = "ti,omap2-wdt";
|
||||
ti,hwmods = "wd_timer2";
|
||||
reg = <0x48022000 0x80>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
compatible = "ti,omap2420-i2c";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
compatible = "ti,omap2420-i2c";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -175,6 +175,25 @@
|
|||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
mmc1: mmc@4809c000 {
|
||||
compatible = "ti,omap2-hsmmc";
|
||||
reg = <0x4809c000 0x200>;
|
||||
interrupts = <83>;
|
||||
ti,hwmods = "mmc1";
|
||||
ti,dual-volt;
|
||||
dmas = <&sdma 61>, <&sdma 62>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
mmc2: mmc@480b4000 {
|
||||
compatible = "ti,omap2-hsmmc";
|
||||
reg = <0x480b4000 0x200>;
|
||||
interrupts = <86>;
|
||||
ti,hwmods = "mmc2";
|
||||
dmas = <&sdma 47>, <&sdma 48>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
timer1: timer@49018000 {
|
||||
compatible = "ti,omap2420-timer";
|
||||
reg = <0x49018000 0x400>;
|
||||
|
|
@ -182,5 +201,35 @@
|
|||
ti,hwmods = "timer1";
|
||||
ti,timer-alwon;
|
||||
};
|
||||
|
||||
mcspi3: mcspi@480b8000 {
|
||||
compatible = "ti,omap2-mcspi";
|
||||
ti,hwmods = "mcspi3";
|
||||
reg = <0x480b8000 0x100>;
|
||||
interrupts = <91>;
|
||||
dmas = <&sdma 15 &sdma 16 &sdma 23 &sdma 24>;
|
||||
dma-names = "tx0", "rx0", "tx1", "rx1";
|
||||
};
|
||||
|
||||
usb_otg_hs: usb_otg_hs@480ac000 {
|
||||
compatible = "ti,omap2-musb";
|
||||
ti,hwmods = "usb_otg_hs";
|
||||
reg = <0x480ac000 0x1000>;
|
||||
interrupts = <93>;
|
||||
};
|
||||
|
||||
wd_timer2: wdt@49016000 {
|
||||
compatible = "ti,omap2-wdt";
|
||||
ti,hwmods = "wd_timer2";
|
||||
reg = <0x49016000 0x80>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
compatible = "ti,omap2430-i2c";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
compatible = "ti,omap2430-i2c";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -215,3 +215,10 @@
|
|||
&usbhsehci {
|
||||
phys = <0 &hsusb2_phy>;
|
||||
};
|
||||
|
||||
&vaux2 {
|
||||
regulator-name = "usb_1v8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -61,6 +61,14 @@
|
|||
vcc-supply = <&hsusb2_power>;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "ti,omap-twl4030";
|
||||
ti,model = "omap3beagle";
|
||||
|
||||
ti,mcbsp = <&mcbsp2>;
|
||||
ti,codec = <&twl_audio>;
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
|
|
@ -120,6 +128,12 @@
|
|||
reg = <0x48>;
|
||||
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
|
||||
interrupt-parent = <&intc>;
|
||||
|
||||
twl_audio: audio {
|
||||
compatible = "ti,twl4030-audio";
|
||||
codec {
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -178,3 +192,10 @@
|
|||
mode = <3>;
|
||||
power = <50>;
|
||||
};
|
||||
|
||||
&vaux2 {
|
||||
regulator-name = "vdd_ehci";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* Device Tree Source for IGEP Technology devices
|
||||
* Common device tree for IGEP boards based on AM/DM37x
|
||||
*
|
||||
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
|
||||
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
|
||||
|
|
@ -10,7 +10,7 @@
|
|||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "omap34xx.dtsi"
|
||||
#include "omap36xx.dtsi"
|
||||
|
||||
/ {
|
||||
memory {
|
||||
|
|
@ -24,6 +24,25 @@
|
|||
ti,mcbsp = <&mcbsp2>;
|
||||
ti,codec = <&twl_audio>;
|
||||
};
|
||||
|
||||
vdd33: regulator-vdd33 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd33";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
lbee1usjyc_vmmc: lbee1usjyc_vmmc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lbee1usjyc_pins>;
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "regulator-lbee1usjyc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 WIFI_PDN */
|
||||
startup-delay-us = <10000>;
|
||||
enable-active-high;
|
||||
vin-supply = <&vdd33>;
|
||||
};
|
||||
};
|
||||
|
||||
&omap3_pmx_core {
|
||||
|
|
@ -48,6 +67,15 @@
|
|||
>;
|
||||
};
|
||||
|
||||
/* WiFi/BT combo */
|
||||
lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x136 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 */
|
||||
0x138 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */
|
||||
0x13a (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */
|
||||
>;
|
||||
};
|
||||
|
||||
mcbsp2_pins: pinmux_mcbsp2_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x10c (PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
|
||||
|
|
@ -65,10 +93,17 @@
|
|||
0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
|
||||
0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
|
||||
0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
|
||||
0x120 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */
|
||||
0x122 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */
|
||||
0x124 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */
|
||||
0x126 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */
|
||||
>;
|
||||
};
|
||||
|
||||
mmc2_pins: pinmux_mmc2_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
|
||||
0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
|
||||
0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
|
||||
0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
|
||||
0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
|
||||
0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
|
||||
>;
|
||||
};
|
||||
|
||||
|
|
@ -78,10 +113,33 @@
|
|||
>;
|
||||
};
|
||||
|
||||
i2c1_pins: pinmux_i2c1_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
|
||||
0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c2_pins: pinmux_i2c2_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x18e (PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */
|
||||
0x190 (PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c3_pins: pinmux_i2c3_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
|
||||
0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
leds_pins: pinmux_leds_pins { };
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
clock-frequency = <2600000>;
|
||||
|
||||
twl: twl@48 {
|
||||
|
|
@ -101,9 +159,16 @@
|
|||
#include "twl4030_omap3.dtsi"
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2_pins>;
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c3_pins>;
|
||||
};
|
||||
|
||||
&mcbsp2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcbsp2_pins>;
|
||||
|
|
@ -114,11 +179,15 @@
|
|||
pinctrl-0 = <&mmc1_pins>;
|
||||
vmmc-supply = <&vmmc1>;
|
||||
vmmc_aux-supply = <&vsim>;
|
||||
bus-width = <8>;
|
||||
bus-width = <4>;
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
status = "disabled";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc2_pins>;
|
||||
vmmc-supply = <&lbee1usjyc_vmmc>;
|
||||
bus-width = <4>;
|
||||
non-removable;
|
||||
};
|
||||
|
||||
&mmc3 {
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* Device Tree Source for IGEPv2 board
|
||||
* Device Tree Source for IGEPv2 Rev. (TI OMAP AM/DM37x)
|
||||
*
|
||||
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
|
||||
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
|
||||
|
|
@ -13,7 +13,7 @@
|
|||
#include "omap-gpmc-smsc911x.dtsi"
|
||||
|
||||
/ {
|
||||
model = "IGEPv2";
|
||||
model = "IGEPv2 (TI OMAP AM/DM37x)";
|
||||
compatible = "isee,omap3-igep0020", "ti,omap3";
|
||||
|
||||
leds {
|
||||
|
|
@ -67,6 +67,8 @@
|
|||
pinctrl-names = "default";
|
||||
pinctrl-0 = <
|
||||
&hsusbb1_pins
|
||||
&tfp410_pins
|
||||
&dss_pins
|
||||
>;
|
||||
|
||||
hsusbb1_pins: pinmux_hsusbb1_pins {
|
||||
|
|
@ -85,6 +87,45 @@
|
|||
0x5ba (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */
|
||||
>;
|
||||
};
|
||||
|
||||
tfp410_pins: tfp410_dvi_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
|
||||
>;
|
||||
};
|
||||
|
||||
dss_pins: pinmux_dss_dvi_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
|
||||
0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
|
||||
0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
|
||||
0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
|
||||
0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
|
||||
0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
|
||||
0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
|
||||
0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
|
||||
0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
|
||||
0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
|
||||
0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
|
||||
0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
|
||||
0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
|
||||
0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
|
||||
0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
|
||||
0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
|
||||
0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
|
||||
0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
|
||||
0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
|
||||
0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
|
||||
0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
|
||||
0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
|
||||
0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
|
||||
0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
|
||||
0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
|
||||
0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
|
||||
0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
|
||||
0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&leds_pins {
|
||||
|
|
@ -174,3 +215,8 @@
|
|||
&usbhsehci {
|
||||
phys = <&hsusb1_phy>;
|
||||
};
|
||||
|
||||
&vpll2 {
|
||||
/* Needed for DSS */
|
||||
regulator-name = "vdds_dsi";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* Device Tree Source for IGEP COM Module
|
||||
* Device Tree Source for IGEP COM MODULE (TI OMAP AM/DM37x)
|
||||
*
|
||||
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
|
||||
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
|
||||
|
|
@ -12,7 +12,7 @@
|
|||
#include "omap3-igep.dtsi"
|
||||
|
||||
/ {
|
||||
model = "IGEP COM Module";
|
||||
model = "IGEP COM MODULE (TI OMAP AM/DM37x)";
|
||||
compatible = "isee,omap3-igep0030", "ti,omap3";
|
||||
|
||||
leds {
|
||||
|
|
|
|||
|
|
@ -9,7 +9,7 @@
|
|||
|
||||
/dts-v1/;
|
||||
|
||||
#include "omap34xx.dtsi"
|
||||
#include "omap34xx-hs.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Nokia N900";
|
||||
|
|
@ -125,6 +125,21 @@
|
|||
>;
|
||||
};
|
||||
|
||||
mmc2_pins: pinmux_mmc2_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
|
||||
0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
|
||||
0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
|
||||
0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
|
||||
0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
|
||||
0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
|
||||
0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */
|
||||
0x136 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */
|
||||
0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */
|
||||
0x13a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */
|
||||
>;
|
||||
};
|
||||
|
||||
display_pins: pinmux_display_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x0d4 (PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */
|
||||
|
|
@ -358,8 +373,14 @@
|
|||
cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
|
||||
};
|
||||
|
||||
/* most boards use vaux3, only some old versions use vmmc2 instead */
|
||||
&mmc2 {
|
||||
status = "disabled";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc2_pins>;
|
||||
vmmc-supply = <&vaux3>;
|
||||
vmmc_aux-supply = <&vsim>;
|
||||
bus-width = <8>;
|
||||
non-removable;
|
||||
};
|
||||
|
||||
&mmc3 {
|
||||
|
|
|
|||
|
|
@ -8,7 +8,7 @@
|
|||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include "omap36xx.dtsi"
|
||||
#include "omap36xx-hs.dtsi"
|
||||
|
||||
/ {
|
||||
cpus {
|
||||
|
|
|
|||
|
|
@ -82,6 +82,13 @@
|
|||
ranges;
|
||||
ti,hwmods = "l3_main";
|
||||
|
||||
aes: aes@480c5000 {
|
||||
compatible = "ti,omap3-aes";
|
||||
ti,hwmods = "aes";
|
||||
reg = <0x480c5000 0x50>;
|
||||
interrupts = <0>;
|
||||
};
|
||||
|
||||
counter32k: counter@48320000 {
|
||||
compatible = "ti,omap-counter32k";
|
||||
reg = <0x48320000 0x20>;
|
||||
|
|
@ -260,6 +267,13 @@
|
|||
ti,hwmods = "i2c3";
|
||||
};
|
||||
|
||||
mailbox: mailbox@48094000 {
|
||||
compatible = "ti,omap3-mailbox";
|
||||
ti,hwmods = "mailbox";
|
||||
reg = <0x48094000 0x200>;
|
||||
interrupts = <26>;
|
||||
};
|
||||
|
||||
mcspi1: spi@48098000 {
|
||||
compatible = "ti,omap2-mcspi";
|
||||
reg = <0x48098000 0x100>;
|
||||
|
|
@ -357,6 +371,13 @@
|
|||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
mmu_isp: mmu@480bd400 {
|
||||
compatible = "ti,omap3-mmu-isp";
|
||||
ti,hwmods = "mmu_isp";
|
||||
reg = <0x480bd400 0x80>;
|
||||
interrupts = <8>;
|
||||
};
|
||||
|
||||
wdt2: wdt@48314000 {
|
||||
compatible = "ti,omap3-wdt";
|
||||
reg = <0x48314000 0x80>;
|
||||
|
|
@ -442,6 +463,27 @@
|
|||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
sham: sham@480c3000 {
|
||||
compatible = "ti,omap3-sham";
|
||||
ti,hwmods = "sham";
|
||||
reg = <0x480c3000 0x64>;
|
||||
interrupts = <49>;
|
||||
};
|
||||
|
||||
smartreflex_core: smartreflex@480cb000 {
|
||||
compatible = "ti,omap3-smartreflex-core";
|
||||
ti,hwmods = "smartreflex_core";
|
||||
reg = <0x480cb000 0x400>;
|
||||
interrupts = <19>;
|
||||
};
|
||||
|
||||
smartreflex_mpu_iva: smartreflex@480c9000 {
|
||||
compatible = "ti,omap3-smartreflex-iva";
|
||||
ti,hwmods = "smartreflex_mpu_iva";
|
||||
reg = <0x480c9000 0x400>;
|
||||
interrupts = <18>;
|
||||
};
|
||||
|
||||
timer1: timer@48318000 {
|
||||
compatible = "ti,omap3430-timer";
|
||||
reg = <0x48318000 0x400>;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,16 @@
|
|||
/* Disabled modules for secure omaps */
|
||||
|
||||
#include "omap34xx.dtsi"
|
||||
|
||||
/* Secure omaps have some devices inaccessible depending on the firmware */
|
||||
&aes {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&sham {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&timer12 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -0,0 +1,16 @@
|
|||
/* Disabled modules for secure omaps */
|
||||
|
||||
#include "omap36xx.dtsi"
|
||||
|
||||
/* Secure omaps have some devices inaccessible depending on the firmware */
|
||||
&aes {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&sham {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&timer12 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -246,15 +246,6 @@
|
|||
0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&omap4_pmx_wkup {
|
||||
led_wkgpio_pins: pinmux_leds_wkpins {
|
||||
pinctrl-single,pins = <
|
||||
0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
|
||||
0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
|
||||
>;
|
||||
};
|
||||
|
||||
/*
|
||||
* wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
|
||||
|
|
@ -274,7 +265,7 @@
|
|||
pinctrl-single,pins = <
|
||||
0x38 (PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */
|
||||
0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
|
||||
0x108 (PIN_OUTPUT | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
|
||||
0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
|
||||
0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
|
||||
0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
|
||||
0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
|
||||
|
|
@ -284,6 +275,15 @@
|
|||
};
|
||||
};
|
||||
|
||||
&omap4_pmx_wkup {
|
||||
led_wkgpio_pins: pinmux_leds_wkpins {
|
||||
pinctrl-single,pins = <
|
||||
0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
|
||||
0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
|
|
|
|||
|
|
@ -300,12 +300,12 @@
|
|||
wl12xx_pins: pinmux_wl12xx_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
|
||||
0x108 (PIN_OUTPUT | MUX_MODE3) /* sdmmc5_clk.sdmmc5_clk */
|
||||
0x10a (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_cmd.sdmmc5_cmd */
|
||||
0x10c (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat0.sdmmc5_dat0 */
|
||||
0x10e (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat1.sdmmc5_dat1 */
|
||||
0x110 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat2.sdmmc5_dat2 */
|
||||
0x112 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat3.sdmmc5_dat3 */
|
||||
0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
|
||||
0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
|
||||
0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
|
||||
0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
|
||||
0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
|
||||
0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -245,14 +245,14 @@
|
|||
|
||||
mpu_periph_clk: mpu_periph_clk {
|
||||
#clock-cells = <0>;
|
||||
compatible = "altr,socfpga-gate-clk";
|
||||
compatible = "altr,socfpga-perip-clk";
|
||||
clocks = <&mpuclk>;
|
||||
fixed-divider = <4>;
|
||||
};
|
||||
|
||||
mpu_l2_ram_clk: mpu_l2_ram_clk {
|
||||
#clock-cells = <0>;
|
||||
compatible = "altr,socfpga-gate-clk";
|
||||
compatible = "altr,socfpga-perip-clk";
|
||||
clocks = <&mpuclk>;
|
||||
fixed-divider = <2>;
|
||||
};
|
||||
|
|
@ -266,8 +266,9 @@
|
|||
|
||||
l3_main_clk: l3_main_clk {
|
||||
#clock-cells = <0>;
|
||||
compatible = "altr,socfpga-gate-clk";
|
||||
compatible = "altr,socfpga-perip-clk";
|
||||
clocks = <&mainclk>;
|
||||
fixed-divider = <1>;
|
||||
};
|
||||
|
||||
l3_mp_clk: l3_mp_clk {
|
||||
|
|
|
|||
|
|
@ -193,7 +193,10 @@
|
|||
pio: pinctrl@01c20800 {
|
||||
compatible = "allwinner,sun6i-a31-pinctrl";
|
||||
reg = <0x01c20800 0x400>;
|
||||
interrupts = <0 11 1>, <0 15 1>, <0 16 1>, <0 17 1>;
|
||||
interrupts = <0 11 4>,
|
||||
<0 15 4>,
|
||||
<0 16 4>,
|
||||
<0 17 4>;
|
||||
clocks = <&apb1_gates 5>;
|
||||
gpio-controller;
|
||||
interrupt-controller;
|
||||
|
|
@ -212,11 +215,11 @@
|
|||
timer@01c20c00 {
|
||||
compatible = "allwinner,sun4i-timer";
|
||||
reg = <0x01c20c00 0xa0>;
|
||||
interrupts = <0 18 1>,
|
||||
<0 19 1>,
|
||||
<0 20 1>,
|
||||
<0 21 1>,
|
||||
<0 22 1>;
|
||||
interrupts = <0 18 4>,
|
||||
<0 19 4>,
|
||||
<0 20 4>,
|
||||
<0 21 4>,
|
||||
<0 22 4>;
|
||||
clocks = <&osc24M>;
|
||||
};
|
||||
|
||||
|
|
@ -228,7 +231,7 @@
|
|||
uart0: serial@01c28000 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x01c28000 0x400>;
|
||||
interrupts = <0 0 1>;
|
||||
interrupts = <0 0 4>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
clocks = <&apb2_gates 16>;
|
||||
|
|
@ -238,7 +241,7 @@
|
|||
uart1: serial@01c28400 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x01c28400 0x400>;
|
||||
interrupts = <0 1 1>;
|
||||
interrupts = <0 1 4>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
clocks = <&apb2_gates 17>;
|
||||
|
|
@ -248,7 +251,7 @@
|
|||
uart2: serial@01c28800 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x01c28800 0x400>;
|
||||
interrupts = <0 2 1>;
|
||||
interrupts = <0 2 4>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
clocks = <&apb2_gates 18>;
|
||||
|
|
@ -258,7 +261,7 @@
|
|||
uart3: serial@01c28c00 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x01c28c00 0x400>;
|
||||
interrupts = <0 3 1>;
|
||||
interrupts = <0 3 4>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
clocks = <&apb2_gates 19>;
|
||||
|
|
@ -268,7 +271,7 @@
|
|||
uart4: serial@01c29000 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x01c29000 0x400>;
|
||||
interrupts = <0 4 1>;
|
||||
interrupts = <0 4 4>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
clocks = <&apb2_gates 20>;
|
||||
|
|
@ -278,7 +281,7 @@
|
|||
uart5: serial@01c29400 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x01c29400 0x400>;
|
||||
interrupts = <0 5 1>;
|
||||
interrupts = <0 5 4>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
clocks = <&apb2_gates 21>;
|
||||
|
|
|
|||
|
|
@ -170,7 +170,7 @@
|
|||
emac: ethernet@01c0b000 {
|
||||
compatible = "allwinner,sun4i-emac";
|
||||
reg = <0x01c0b000 0x1000>;
|
||||
interrupts = <0 55 1>;
|
||||
interrupts = <0 55 4>;
|
||||
clocks = <&ahb_gates 17>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -186,7 +186,7 @@
|
|||
pio: pinctrl@01c20800 {
|
||||
compatible = "allwinner,sun7i-a20-pinctrl";
|
||||
reg = <0x01c20800 0x400>;
|
||||
interrupts = <0 28 1>;
|
||||
interrupts = <0 28 4>;
|
||||
clocks = <&apb0_gates 5>;
|
||||
gpio-controller;
|
||||
interrupt-controller;
|
||||
|
|
@ -251,12 +251,12 @@
|
|||
timer@01c20c00 {
|
||||
compatible = "allwinner,sun4i-timer";
|
||||
reg = <0x01c20c00 0x90>;
|
||||
interrupts = <0 22 1>,
|
||||
<0 23 1>,
|
||||
<0 24 1>,
|
||||
<0 25 1>,
|
||||
<0 67 1>,
|
||||
<0 68 1>;
|
||||
interrupts = <0 22 4>,
|
||||
<0 23 4>,
|
||||
<0 24 4>,
|
||||
<0 25 4>,
|
||||
<0 67 4>,
|
||||
<0 68 4>;
|
||||
clocks = <&osc24M>;
|
||||
};
|
||||
|
||||
|
|
@ -273,7 +273,7 @@
|
|||
uart0: serial@01c28000 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x01c28000 0x400>;
|
||||
interrupts = <0 1 1>;
|
||||
interrupts = <0 1 4>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
clocks = <&apb1_gates 16>;
|
||||
|
|
@ -283,7 +283,7 @@
|
|||
uart1: serial@01c28400 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x01c28400 0x400>;
|
||||
interrupts = <0 2 1>;
|
||||
interrupts = <0 2 4>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
clocks = <&apb1_gates 17>;
|
||||
|
|
@ -293,7 +293,7 @@
|
|||
uart2: serial@01c28800 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x01c28800 0x400>;
|
||||
interrupts = <0 3 1>;
|
||||
interrupts = <0 3 4>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
clocks = <&apb1_gates 18>;
|
||||
|
|
@ -303,7 +303,7 @@
|
|||
uart3: serial@01c28c00 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x01c28c00 0x400>;
|
||||
interrupts = <0 4 1>;
|
||||
interrupts = <0 4 4>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
clocks = <&apb1_gates 19>;
|
||||
|
|
@ -313,7 +313,7 @@
|
|||
uart4: serial@01c29000 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x01c29000 0x400>;
|
||||
interrupts = <0 17 1>;
|
||||
interrupts = <0 17 4>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
clocks = <&apb1_gates 20>;
|
||||
|
|
@ -323,7 +323,7 @@
|
|||
uart5: serial@01c29400 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x01c29400 0x400>;
|
||||
interrupts = <0 18 1>;
|
||||
interrupts = <0 18 4>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
clocks = <&apb1_gates 21>;
|
||||
|
|
@ -333,7 +333,7 @@
|
|||
uart6: serial@01c29800 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x01c29800 0x400>;
|
||||
interrupts = <0 19 1>;
|
||||
interrupts = <0 19 4>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
clocks = <&apb1_gates 22>;
|
||||
|
|
@ -343,7 +343,7 @@
|
|||
uart7: serial@01c29c00 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x01c29c00 0x400>;
|
||||
interrupts = <0 20 1>;
|
||||
interrupts = <0 20 4>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
clocks = <&apb1_gates 23>;
|
||||
|
|
@ -353,7 +353,7 @@
|
|||
i2c0: i2c@01c2ac00 {
|
||||
compatible = "allwinner,sun4i-i2c";
|
||||
reg = <0x01c2ac00 0x400>;
|
||||
interrupts = <0 7 1>;
|
||||
interrupts = <0 7 4>;
|
||||
clocks = <&apb1_gates 0>;
|
||||
clock-frequency = <100000>;
|
||||
status = "disabled";
|
||||
|
|
@ -362,7 +362,7 @@
|
|||
i2c1: i2c@01c2b000 {
|
||||
compatible = "allwinner,sun4i-i2c";
|
||||
reg = <0x01c2b000 0x400>;
|
||||
interrupts = <0 8 1>;
|
||||
interrupts = <0 8 4>;
|
||||
clocks = <&apb1_gates 1>;
|
||||
clock-frequency = <100000>;
|
||||
status = "disabled";
|
||||
|
|
@ -371,7 +371,7 @@
|
|||
i2c2: i2c@01c2b400 {
|
||||
compatible = "allwinner,sun4i-i2c";
|
||||
reg = <0x01c2b400 0x400>;
|
||||
interrupts = <0 9 1>;
|
||||
interrupts = <0 9 4>;
|
||||
clocks = <&apb1_gates 2>;
|
||||
clock-frequency = <100000>;
|
||||
status = "disabled";
|
||||
|
|
@ -380,7 +380,7 @@
|
|||
i2c3: i2c@01c2b800 {
|
||||
compatible = "allwinner,sun4i-i2c";
|
||||
reg = <0x01c2b800 0x400>;
|
||||
interrupts = <0 88 1>;
|
||||
interrupts = <0 88 4>;
|
||||
clocks = <&apb1_gates 3>;
|
||||
clock-frequency = <100000>;
|
||||
status = "disabled";
|
||||
|
|
@ -389,7 +389,7 @@
|
|||
i2c4: i2c@01c2bc00 {
|
||||
compatible = "allwinner,sun4i-i2c";
|
||||
reg = <0x01c2bc00 0x400>;
|
||||
interrupts = <0 89 1>;
|
||||
interrupts = <0 89 4>;
|
||||
clocks = <&apb1_gates 15>;
|
||||
clock-frequency = <100000>;
|
||||
status = "disabled";
|
||||
|
|
|
|||
|
|
@ -69,6 +69,7 @@ CONFIG_KS8851=y
|
|||
CONFIG_SMSC911X=y
|
||||
CONFIG_STMMAC_ETH=y
|
||||
CONFIG_MDIO_SUN4I=y
|
||||
CONFIG_TI_CPSW=y
|
||||
CONFIG_KEYBOARD_SPEAR=y
|
||||
CONFIG_SERIO_AMBAKMI=y
|
||||
CONFIG_SERIAL_8250=y
|
||||
|
|
@ -133,12 +134,14 @@ CONFIG_USB_GPIO_VBUS=y
|
|||
CONFIG_USB_ISP1301=y
|
||||
CONFIG_USB_MXS_PHY=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_BLOCK_MINORS=16
|
||||
CONFIG_MMC_ARMMMCI=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_PLTFM=y
|
||||
CONFIG_MMC_SDHCI_ESDHC_IMX=y
|
||||
CONFIG_MMC_SDHCI_TEGRA=y
|
||||
CONFIG_MMC_SDHCI_SPEAR=y
|
||||
CONFIG_MMC_SDHCI_BCM_KONA=y
|
||||
CONFIG_MMC_OMAP=y
|
||||
CONFIG_MMC_OMAP_HS=y
|
||||
CONFIG_EDAC=y
|
||||
|
|
|
|||
|
|
@ -173,6 +173,7 @@ CONFIG_MFD_PALMAS=y
|
|||
CONFIG_MFD_TPS65217=y
|
||||
CONFIG_MFD_TPS65910=y
|
||||
CONFIG_TWL6040_CORE=y
|
||||
CONFIG_REGULATOR_FIXED_VOLTAGE=y
|
||||
CONFIG_REGULATOR_PALMAS=y
|
||||
CONFIG_REGULATOR_TPS65023=y
|
||||
CONFIG_REGULATOR_TPS6507X=y
|
||||
|
|
|
|||
|
|
@ -12,6 +12,9 @@ CONFIG_NET=y
|
|||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||
|
|
@ -58,4 +61,8 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
|||
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
|
||||
CONFIG_COMMON_CLK_DEBUG=y
|
||||
# CONFIG_IOMMU_SUPPORT is not set
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NLS=y
|
||||
CONFIG_PRINTK_TIME=y
|
||||
|
|
|
|||
|
|
@ -22,6 +22,7 @@ CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
|
|||
CONFIG_CPU_FREQ=y
|
||||
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
|
||||
CONFIG_CPU_IDLE=y
|
||||
CONFIG_ARM_U8500_CPUIDLE=y
|
||||
CONFIG_VFP=y
|
||||
CONFIG_NEON=y
|
||||
CONFIG_PM_RUNTIME=y
|
||||
|
|
@ -109,6 +110,8 @@ CONFIG_EXT2_FS_SECURITY=y
|
|||
CONFIG_EXT3_FS=y
|
||||
CONFIG_EXT4_FS=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_DEVTMPFS=y
|
||||
CONFIG_DEVTMPFS_MOUNT=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_TMPFS_POSIX_ACL=y
|
||||
# CONFIG_MISC_FILESYSTEMS is not set
|
||||
|
|
|
|||
|
|
@ -100,23 +100,19 @@
|
|||
#define TASK_UNMAPPED_BASE UL(0x00000000)
|
||||
#endif
|
||||
|
||||
#ifndef PHYS_OFFSET
|
||||
#define PHYS_OFFSET UL(CONFIG_DRAM_BASE)
|
||||
#endif
|
||||
|
||||
#ifndef END_MEM
|
||||
#define END_MEM (UL(CONFIG_DRAM_BASE) + CONFIG_DRAM_SIZE)
|
||||
#endif
|
||||
|
||||
#ifndef PAGE_OFFSET
|
||||
#define PAGE_OFFSET (PHYS_OFFSET)
|
||||
#define PAGE_OFFSET PLAT_PHYS_OFFSET
|
||||
#endif
|
||||
|
||||
/*
|
||||
* The module can be at any place in ram in nommu mode.
|
||||
*/
|
||||
#define MODULES_END (END_MEM)
|
||||
#define MODULES_VADDR (PHYS_OFFSET)
|
||||
#define MODULES_VADDR PAGE_OFFSET
|
||||
|
||||
#define XIP_VIRT_ADDR(physaddr) (physaddr)
|
||||
|
||||
|
|
@ -157,6 +153,16 @@
|
|||
#endif
|
||||
#define ARCH_PGD_MASK ((1 << ARCH_PGD_SHIFT) - 1)
|
||||
|
||||
/*
|
||||
* PLAT_PHYS_OFFSET is the offset (from zero) of the start of physical
|
||||
* memory. This is used for XIP and NoMMU kernels, or by kernels which
|
||||
* have their own mach/memory.h. Assembly code must always use
|
||||
* PLAT_PHYS_OFFSET and not PHYS_OFFSET.
|
||||
*/
|
||||
#ifndef PLAT_PHYS_OFFSET
|
||||
#define PLAT_PHYS_OFFSET UL(CONFIG_PHYS_OFFSET)
|
||||
#endif
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
/*
|
||||
|
|
@ -239,6 +245,8 @@ static inline unsigned long __phys_to_virt(phys_addr_t x)
|
|||
|
||||
#else
|
||||
|
||||
#define PHYS_OFFSET PLAT_PHYS_OFFSET
|
||||
|
||||
static inline phys_addr_t __virt_to_phys(unsigned long x)
|
||||
{
|
||||
return (phys_addr_t)x - PAGE_OFFSET + PHYS_OFFSET;
|
||||
|
|
@ -251,17 +259,6 @@ static inline unsigned long __phys_to_virt(phys_addr_t x)
|
|||
|
||||
#endif
|
||||
#endif
|
||||
#endif /* __ASSEMBLY__ */
|
||||
|
||||
#ifndef PHYS_OFFSET
|
||||
#ifdef PLAT_PHYS_OFFSET
|
||||
#define PHYS_OFFSET PLAT_PHYS_OFFSET
|
||||
#else
|
||||
#define PHYS_OFFSET UL(CONFIG_PHYS_OFFSET)
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
/*
|
||||
* PFNs are used to describe any physical page; this means
|
||||
|
|
|
|||
|
|
@ -61,7 +61,7 @@ extern void __pgd_error(const char *file, int line, pgd_t);
|
|||
* mapping to be mapped at. This is particularly important for
|
||||
* non-high vector CPUs.
|
||||
*/
|
||||
#define FIRST_USER_ADDRESS PAGE_SIZE
|
||||
#define FIRST_USER_ADDRESS (PAGE_SIZE * 2)
|
||||
|
||||
/*
|
||||
* Use TASK_SIZE as the ceiling argument for free_pgtables() and
|
||||
|
|
|
|||
|
|
@ -68,7 +68,7 @@ ENTRY(stext)
|
|||
|
||||
#ifdef CONFIG_ARM_MPU
|
||||
/* Calculate the size of a region covering just the kernel */
|
||||
ldr r5, =PHYS_OFFSET @ Region start: PHYS_OFFSET
|
||||
ldr r5, =PLAT_PHYS_OFFSET @ Region start: PHYS_OFFSET
|
||||
ldr r6, =(_end) @ Cover whole kernel
|
||||
sub r6, r6, r5 @ Minimum size of region to map
|
||||
clz r6, r6 @ Region size must be 2^N...
|
||||
|
|
@ -213,7 +213,7 @@ ENTRY(__setup_mpu)
|
|||
set_region_nr r0, #MPU_RAM_REGION
|
||||
isb
|
||||
/* Full access from PL0, PL1, shared for CONFIG_SMP, cacheable */
|
||||
ldr r0, =PHYS_OFFSET @ RAM starts at PHYS_OFFSET
|
||||
ldr r0, =PLAT_PHYS_OFFSET @ RAM starts at PHYS_OFFSET
|
||||
ldr r5,=(MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL)
|
||||
|
||||
setup_region r0, r5, r6, MPU_DATA_SIDE @ PHYS_OFFSET, shared, enabled
|
||||
|
|
|
|||
|
|
@ -110,7 +110,7 @@ ENTRY(stext)
|
|||
sub r4, r3, r4 @ (PHYS_OFFSET - PAGE_OFFSET)
|
||||
add r8, r8, r4 @ PHYS_OFFSET
|
||||
#else
|
||||
ldr r8, =PHYS_OFFSET @ always constant in this case
|
||||
ldr r8, =PLAT_PHYS_OFFSET @ always constant in this case
|
||||
#endif
|
||||
|
||||
/*
|
||||
|
|
|
|||
|
|
@ -14,11 +14,12 @@
|
|||
#include <asm/pgalloc.h>
|
||||
#include <asm/mmu_context.h>
|
||||
#include <asm/cacheflush.h>
|
||||
#include <asm/fncpy.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/smp_plat.h>
|
||||
#include <asm/system_misc.h>
|
||||
|
||||
extern const unsigned char relocate_new_kernel[];
|
||||
extern void relocate_new_kernel(void);
|
||||
extern const unsigned int relocate_new_kernel_size;
|
||||
|
||||
extern unsigned long kexec_start_address;
|
||||
|
|
@ -142,6 +143,8 @@ void machine_kexec(struct kimage *image)
|
|||
{
|
||||
unsigned long page_list;
|
||||
unsigned long reboot_code_buffer_phys;
|
||||
unsigned long reboot_entry = (unsigned long)relocate_new_kernel;
|
||||
unsigned long reboot_entry_phys;
|
||||
void *reboot_code_buffer;
|
||||
|
||||
/*
|
||||
|
|
@ -168,16 +171,16 @@ void machine_kexec(struct kimage *image)
|
|||
|
||||
|
||||
/* copy our kernel relocation code to the control code page */
|
||||
memcpy(reboot_code_buffer,
|
||||
relocate_new_kernel, relocate_new_kernel_size);
|
||||
reboot_entry = fncpy(reboot_code_buffer,
|
||||
reboot_entry,
|
||||
relocate_new_kernel_size);
|
||||
reboot_entry_phys = (unsigned long)reboot_entry +
|
||||
(reboot_code_buffer_phys - (unsigned long)reboot_code_buffer);
|
||||
|
||||
|
||||
flush_icache_range((unsigned long) reboot_code_buffer,
|
||||
(unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
|
||||
printk(KERN_INFO "Bye!\n");
|
||||
|
||||
if (kexec_reinit)
|
||||
kexec_reinit();
|
||||
|
||||
soft_restart(reboot_code_buffer_phys);
|
||||
soft_restart(reboot_entry_phys);
|
||||
}
|
||||
|
|
|
|||
|
|
@ -404,6 +404,7 @@ EXPORT_SYMBOL(dump_fpu);
|
|||
unsigned long get_wchan(struct task_struct *p)
|
||||
{
|
||||
struct stackframe frame;
|
||||
unsigned long stack_page;
|
||||
int count = 0;
|
||||
if (!p || p == current || p->state == TASK_RUNNING)
|
||||
return 0;
|
||||
|
|
@ -412,9 +413,11 @@ unsigned long get_wchan(struct task_struct *p)
|
|||
frame.sp = thread_saved_sp(p);
|
||||
frame.lr = 0; /* recovered from the stack */
|
||||
frame.pc = thread_saved_pc(p);
|
||||
stack_page = (unsigned long)task_stack_page(p);
|
||||
do {
|
||||
int ret = unwind_frame(&frame);
|
||||
if (ret < 0)
|
||||
if (frame.sp < stack_page ||
|
||||
frame.sp >= stack_page + THREAD_SIZE ||
|
||||
unwind_frame(&frame) < 0)
|
||||
return 0;
|
||||
if (!in_sched_functions(frame.pc))
|
||||
return frame.pc;
|
||||
|
|
|
|||
|
|
@ -2,10 +2,12 @@
|
|||
* relocate_kernel.S - put the kernel image in place to boot
|
||||
*/
|
||||
|
||||
#include <linux/linkage.h>
|
||||
#include <asm/kexec.h>
|
||||
|
||||
.globl relocate_new_kernel
|
||||
relocate_new_kernel:
|
||||
.align 3 /* not needed for this code, but keeps fncpy() happy */
|
||||
|
||||
ENTRY(relocate_new_kernel)
|
||||
|
||||
ldr r0,kexec_indirection_page
|
||||
ldr r1,kexec_start_address
|
||||
|
|
@ -79,6 +81,8 @@ kexec_mach_type:
|
|||
kexec_boot_atags:
|
||||
.long 0x0
|
||||
|
||||
ENDPROC(relocate_new_kernel)
|
||||
|
||||
relocate_new_kernel_end:
|
||||
|
||||
.globl relocate_new_kernel_size
|
||||
|
|
|
|||
|
|
@ -873,8 +873,6 @@ void __init setup_arch(char **cmdline_p)
|
|||
machine_desc = mdesc;
|
||||
machine_name = mdesc->name;
|
||||
|
||||
setup_dma_zone(mdesc);
|
||||
|
||||
if (mdesc->reboot_mode != REBOOT_HARD)
|
||||
reboot_mode = mdesc->reboot_mode;
|
||||
|
||||
|
|
@ -892,6 +890,7 @@ void __init setup_arch(char **cmdline_p)
|
|||
sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
|
||||
|
||||
early_paging_init(mdesc, lookup_processor_type(read_cpuid_id()));
|
||||
setup_dma_zone(mdesc);
|
||||
sanity_check_meminfo();
|
||||
arm_memblock_init(&meminfo, mdesc);
|
||||
|
||||
|
|
|
|||
|
|
@ -30,6 +30,27 @@
|
|||
* snippets.
|
||||
*/
|
||||
|
||||
/*
|
||||
* In CPU_THUMBONLY case kernel arm opcodes are not allowed.
|
||||
* Note in this case codes skips those instructions but it uses .org
|
||||
* directive to keep correct layout of sigreturn_codes array.
|
||||
*/
|
||||
#ifndef CONFIG_CPU_THUMBONLY
|
||||
#define ARM_OK(code...) code
|
||||
#else
|
||||
#define ARM_OK(code...)
|
||||
#endif
|
||||
|
||||
.macro arm_slot n
|
||||
.org sigreturn_codes + 12 * (\n)
|
||||
ARM_OK( .arm )
|
||||
.endm
|
||||
|
||||
.macro thumb_slot n
|
||||
.org sigreturn_codes + 12 * (\n) + 8
|
||||
.thumb
|
||||
.endm
|
||||
|
||||
#if __LINUX_ARM_ARCH__ <= 4
|
||||
/*
|
||||
* Note we manually set minimally required arch that supports
|
||||
|
|
@ -45,26 +66,27 @@
|
|||
.global sigreturn_codes
|
||||
.type sigreturn_codes, #object
|
||||
|
||||
.arm
|
||||
.align
|
||||
|
||||
sigreturn_codes:
|
||||
|
||||
/* ARM sigreturn syscall code snippet */
|
||||
mov r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
|
||||
swi #(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)
|
||||
arm_slot 0
|
||||
ARM_OK( mov r7, #(__NR_sigreturn - __NR_SYSCALL_BASE) )
|
||||
ARM_OK( swi #(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE) )
|
||||
|
||||
/* Thumb sigreturn syscall code snippet */
|
||||
.thumb
|
||||
thumb_slot 0
|
||||
movs r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
|
||||
swi #0
|
||||
|
||||
/* ARM sigreturn_rt syscall code snippet */
|
||||
.arm
|
||||
mov r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
|
||||
swi #(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)
|
||||
arm_slot 1
|
||||
ARM_OK( mov r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE) )
|
||||
ARM_OK( swi #(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE) )
|
||||
|
||||
/* Thumb sigreturn_rt syscall code snippet */
|
||||
.thumb
|
||||
thumb_slot 1
|
||||
movs r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
|
||||
swi #0
|
||||
|
||||
|
|
@ -74,7 +96,7 @@ sigreturn_codes:
|
|||
* it is thumb case or not, so we need additional
|
||||
* word after real last entry.
|
||||
*/
|
||||
.arm
|
||||
arm_slot 2
|
||||
.space 4
|
||||
|
||||
.size sigreturn_codes, . - sigreturn_codes
|
||||
|
|
|
|||
|
|
@ -31,7 +31,7 @@ int notrace unwind_frame(struct stackframe *frame)
|
|||
high = ALIGN(low, THREAD_SIZE);
|
||||
|
||||
/* check current frame pointer is within bounds */
|
||||
if (fp < (low + 12) || fp + 4 >= high)
|
||||
if (fp < low + 12 || fp > high - 4)
|
||||
return -EINVAL;
|
||||
|
||||
/* restore the registers from the stack frame */
|
||||
|
|
|
|||
|
|
@ -509,9 +509,10 @@ static inline int
|
|||
__do_cache_op(unsigned long start, unsigned long end)
|
||||
{
|
||||
int ret;
|
||||
unsigned long chunk = PAGE_SIZE;
|
||||
|
||||
do {
|
||||
unsigned long chunk = min(PAGE_SIZE, end - start);
|
||||
|
||||
if (signal_pending(current)) {
|
||||
struct thread_info *ti = current_thread_info();
|
||||
|
||||
|
|
|
|||
|
|
@ -40,6 +40,7 @@ ENTRY(__loop_const_udelay) @ 0 <= r0 <= 0x7fffff06
|
|||
/*
|
||||
* loops = r0 * HZ * loops_per_jiffy / 1000000
|
||||
*/
|
||||
.align 3
|
||||
|
||||
@ Delay routine
|
||||
ENTRY(__loop_delay)
|
||||
|
|
|
|||
|
|
@ -174,7 +174,6 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
|
|||
static struct clock_event_device clkevt = {
|
||||
.name = "at91_tick",
|
||||
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
|
||||
.shift = 32,
|
||||
.rating = 150,
|
||||
.set_next_event = clkevt32k_next_event,
|
||||
.set_mode = clkevt32k_mode,
|
||||
|
|
@ -265,11 +264,9 @@ void __init at91rm9200_timer_init(void)
|
|||
at91_st_write(AT91_ST_RTMR, 1);
|
||||
|
||||
/* Setup timer clockevent, with minimum of two ticks (important!!) */
|
||||
clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift);
|
||||
clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt);
|
||||
clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1;
|
||||
clkevt.cpumask = cpumask_of(0);
|
||||
clockevents_register_device(&clkevt);
|
||||
clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK,
|
||||
2, AT91_ST_ALMV);
|
||||
|
||||
/* register clocksource */
|
||||
clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);
|
||||
|
|
|
|||
|
|
@ -16,7 +16,11 @@
|
|||
#include <mach/at91_ramc.h>
|
||||
#include <mach/at91rm9200_sdramc.h>
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
extern void at91_pm_set_standby(void (*at91_standby)(void));
|
||||
#else
|
||||
static inline void at91_pm_set_standby(void (*at91_standby)(void)) { }
|
||||
#endif
|
||||
|
||||
/*
|
||||
* The AT91RM9200 goes into self-refresh mode with this command, and will
|
||||
|
|
|
|||
|
|
@ -95,19 +95,19 @@ static struct clk twi0_clk = {
|
|||
.name = "twi0_clk",
|
||||
.pid = SAMA5D3_ID_TWI0,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
.div = AT91_PMC_PCR_DIV2,
|
||||
.div = AT91_PMC_PCR_DIV8,
|
||||
};
|
||||
static struct clk twi1_clk = {
|
||||
.name = "twi1_clk",
|
||||
.pid = SAMA5D3_ID_TWI1,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
.div = AT91_PMC_PCR_DIV2,
|
||||
.div = AT91_PMC_PCR_DIV8,
|
||||
};
|
||||
static struct clk twi2_clk = {
|
||||
.name = "twi2_clk",
|
||||
.pid = SAMA5D3_ID_TWI2,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
.div = AT91_PMC_PCR_DIV2,
|
||||
.div = AT91_PMC_PCR_DIV8,
|
||||
};
|
||||
static struct clk mmc0_clk = {
|
||||
.name = "mci0_clk",
|
||||
|
|
|
|||
|
|
@ -487,7 +487,7 @@ int __init da8xx_register_emac(void)
|
|||
|
||||
static struct resource da830_mcasp1_resources[] = {
|
||||
{
|
||||
.name = "mcasp1",
|
||||
.name = "mpu",
|
||||
.start = DAVINCI_DA830_MCASP1_REG_BASE,
|
||||
.end = DAVINCI_DA830_MCASP1_REG_BASE + (SZ_1K * 12) - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
|
|
@ -515,7 +515,7 @@ static struct platform_device da830_mcasp1_device = {
|
|||
|
||||
static struct resource da850_mcasp_resources[] = {
|
||||
{
|
||||
.name = "mcasp",
|
||||
.name = "mpu",
|
||||
.start = DAVINCI_DA8XX_MCASP0_REG_BASE,
|
||||
.end = DAVINCI_DA8XX_MCASP0_REG_BASE + (SZ_1K * 12) - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
|
|
|
|||
|
|
@ -641,6 +641,7 @@ static struct platform_device dm355_edma_device = {
|
|||
|
||||
static struct resource dm355_asp1_resources[] = {
|
||||
{
|
||||
.name = "mpu",
|
||||
.start = DAVINCI_ASP1_BASE,
|
||||
.end = DAVINCI_ASP1_BASE + SZ_8K - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
|
|
@ -906,7 +907,7 @@ static struct davinci_gpio_platform_data dm355_gpio_platform_data = {
|
|||
int __init dm355_gpio_register(void)
|
||||
{
|
||||
return davinci_gpio_register(dm355_gpio_resources,
|
||||
sizeof(dm355_gpio_resources),
|
||||
ARRAY_SIZE(dm355_gpio_resources),
|
||||
&dm355_gpio_platform_data);
|
||||
}
|
||||
/*----------------------------------------------------------------------*/
|
||||
|
|
|
|||
|
|
@ -720,7 +720,7 @@ static struct davinci_gpio_platform_data dm365_gpio_platform_data = {
|
|||
int __init dm365_gpio_register(void)
|
||||
{
|
||||
return davinci_gpio_register(dm365_gpio_resources,
|
||||
sizeof(dm365_gpio_resources),
|
||||
ARRAY_SIZE(dm365_gpio_resources),
|
||||
&dm365_gpio_platform_data);
|
||||
}
|
||||
|
||||
|
|
@ -942,6 +942,7 @@ static struct platform_device dm365_edma_device = {
|
|||
|
||||
static struct resource dm365_asp_resources[] = {
|
||||
{
|
||||
.name = "mpu",
|
||||
.start = DAVINCI_DM365_ASP0_BASE,
|
||||
.end = DAVINCI_DM365_ASP0_BASE + SZ_8K - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
|
|
|
|||
|
|
@ -572,6 +572,7 @@ static struct platform_device dm644x_edma_device = {
|
|||
/* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */
|
||||
static struct resource dm644x_asp_resources[] = {
|
||||
{
|
||||
.name = "mpu",
|
||||
.start = DAVINCI_ASP0_BASE,
|
||||
.end = DAVINCI_ASP0_BASE + SZ_8K - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
|
|
@ -792,7 +793,7 @@ static struct davinci_gpio_platform_data dm644_gpio_platform_data = {
|
|||
int __init dm644x_gpio_register(void)
|
||||
{
|
||||
return davinci_gpio_register(dm644_gpio_resources,
|
||||
sizeof(dm644_gpio_resources),
|
||||
ARRAY_SIZE(dm644_gpio_resources),
|
||||
&dm644_gpio_platform_data);
|
||||
}
|
||||
/*----------------------------------------------------------------------*/
|
||||
|
|
|
|||
|
|
@ -621,7 +621,7 @@ static struct platform_device dm646x_edma_device = {
|
|||
|
||||
static struct resource dm646x_mcasp0_resources[] = {
|
||||
{
|
||||
.name = "mcasp0",
|
||||
.name = "mpu",
|
||||
.start = DAVINCI_DM646X_MCASP0_REG_BASE,
|
||||
.end = DAVINCI_DM646X_MCASP0_REG_BASE + (SZ_1K << 1) - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
|
|
@ -641,7 +641,7 @@ static struct resource dm646x_mcasp0_resources[] = {
|
|||
|
||||
static struct resource dm646x_mcasp1_resources[] = {
|
||||
{
|
||||
.name = "mcasp1",
|
||||
.name = "mpu",
|
||||
.start = DAVINCI_DM646X_MCASP1_REG_BASE,
|
||||
.end = DAVINCI_DM646X_MCASP1_REG_BASE + (SZ_1K << 1) - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
|
|
@ -769,7 +769,7 @@ static struct davinci_gpio_platform_data dm646x_gpio_platform_data = {
|
|||
int __init dm646x_gpio_register(void)
|
||||
{
|
||||
return davinci_gpio_register(dm646x_gpio_resources,
|
||||
sizeof(dm646x_gpio_resources),
|
||||
ARRAY_SIZE(dm646x_gpio_resources),
|
||||
&dm646x_gpio_platform_data);
|
||||
}
|
||||
/*----------------------------------------------------------------------*/
|
||||
|
|
|
|||
|
|
@ -15,6 +15,7 @@
|
|||
#include <linux/init.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/spinlock.h>
|
||||
#include <video/vga.h>
|
||||
|
||||
#include <asm/pgtable.h>
|
||||
#include <asm/page.h>
|
||||
|
|
@ -196,6 +197,8 @@ void __init footbridge_map_io(void)
|
|||
iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
|
||||
pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO));
|
||||
}
|
||||
|
||||
vga_base = PCIMEM_BASE;
|
||||
}
|
||||
|
||||
void footbridge_restart(enum reboot_mode mode, const char *cmd)
|
||||
|
|
|
|||
|
|
@ -18,7 +18,6 @@
|
|||
#include <linux/irq.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/spinlock.h>
|
||||
#include <video/vga.h>
|
||||
|
||||
#include <asm/irq.h>
|
||||
#include <asm/mach/pci.h>
|
||||
|
|
@ -291,7 +290,6 @@ void __init dc21285_preinit(void)
|
|||
int cfn_mode;
|
||||
|
||||
pcibios_min_mem = 0x81000000;
|
||||
vga_base = PCIMEM_BASE;
|
||||
|
||||
mem_size = (unsigned int)high_memory - PAGE_OFFSET;
|
||||
for (mem_mask = 0x00100000; mem_mask < 0x10000000; mem_mask <<= 1)
|
||||
|
|
|
|||
|
|
@ -30,21 +30,24 @@ static const struct {
|
|||
const char *name;
|
||||
const char *trigger;
|
||||
} ebsa285_leds[] = {
|
||||
{ "ebsa285:amber", "heartbeat", },
|
||||
{ "ebsa285:green", "cpu0", },
|
||||
{ "ebsa285:amber", "cpu0", },
|
||||
{ "ebsa285:green", "heartbeat", },
|
||||
{ "ebsa285:red",},
|
||||
};
|
||||
|
||||
static unsigned char hw_led_state;
|
||||
|
||||
static void ebsa285_led_set(struct led_classdev *cdev,
|
||||
enum led_brightness b)
|
||||
{
|
||||
struct ebsa285_led *led = container_of(cdev,
|
||||
struct ebsa285_led, cdev);
|
||||
|
||||
if (b != LED_OFF)
|
||||
*XBUS_LEDS |= led->mask;
|
||||
if (b == LED_OFF)
|
||||
hw_led_state |= led->mask;
|
||||
else
|
||||
*XBUS_LEDS &= ~led->mask;
|
||||
hw_led_state &= ~led->mask;
|
||||
*XBUS_LEDS = hw_led_state;
|
||||
}
|
||||
|
||||
static enum led_brightness ebsa285_led_get(struct led_classdev *cdev)
|
||||
|
|
@ -52,18 +55,19 @@ static enum led_brightness ebsa285_led_get(struct led_classdev *cdev)
|
|||
struct ebsa285_led *led = container_of(cdev,
|
||||
struct ebsa285_led, cdev);
|
||||
|
||||
return (*XBUS_LEDS & led->mask) ? LED_FULL : LED_OFF;
|
||||
return hw_led_state & led->mask ? LED_OFF : LED_FULL;
|
||||
}
|
||||
|
||||
static int __init ebsa285_leds_init(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
if (machine_is_ebsa285())
|
||||
if (!machine_is_ebsa285())
|
||||
return -ENODEV;
|
||||
|
||||
/* 3 LEDS All ON */
|
||||
*XBUS_LEDS |= XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED;
|
||||
/* 3 LEDS all off */
|
||||
hw_led_state = XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED;
|
||||
*XBUS_LEDS = hw_led_state;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(ebsa285_leds); i++) {
|
||||
struct ebsa285_led *led;
|
||||
|
|
|
|||
|
|
@ -17,12 +17,15 @@
|
|||
#include <linux/clkdev.h>
|
||||
#include <linux/clocksource.h>
|
||||
#include <linux/dma-mapping.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/irqchip.h>
|
||||
#include <linux/mailbox.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_irq.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <linux/of_address.h>
|
||||
#include <linux/reboot.h>
|
||||
#include <linux/amba/bus.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
|
|
@ -130,6 +133,24 @@ static struct platform_device highbank_cpuidle_device = {
|
|||
.name = "cpuidle-calxeda",
|
||||
};
|
||||
|
||||
static int hb_keys_notifier(struct notifier_block *nb, unsigned long event, void *data)
|
||||
{
|
||||
u32 key = *(u32 *)data;
|
||||
|
||||
if (event != 0x1000)
|
||||
return 0;
|
||||
|
||||
if (key == KEY_POWER)
|
||||
orderly_poweroff(false);
|
||||
else if (key == 0xffff)
|
||||
ctrl_alt_del();
|
||||
|
||||
return 0;
|
||||
}
|
||||
static struct notifier_block hb_keys_nb = {
|
||||
.notifier_call = hb_keys_notifier,
|
||||
};
|
||||
|
||||
static void __init highbank_init(void)
|
||||
{
|
||||
struct device_node *np;
|
||||
|
|
@ -145,6 +166,8 @@ static void __init highbank_init(void)
|
|||
bus_register_notifier(&platform_bus_type, &highbank_platform_nb);
|
||||
bus_register_notifier(&amba_bustype, &highbank_amba_nb);
|
||||
|
||||
pl320_ipc_register_notifier(&hb_keys_nb);
|
||||
|
||||
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
|
||||
|
||||
if (psci_ops.cpu_suspend)
|
||||
|
|
|
|||
|
|
@ -19,11 +19,11 @@ secure-common = omap-smc.o omap-secure.o
|
|||
|
||||
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
|
||||
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
|
||||
obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
|
||||
obj-$(CONFIG_ARCH_OMAP4) += $(hwmod-common) $(secure-common)
|
||||
obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
|
||||
obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common)
|
||||
obj-$(CONFIG_SOC_OMAP5) += $(hwmod-common) $(secure-common)
|
||||
obj-$(CONFIG_SOC_AM43XX) += $(hwmod-common) $(secure-common)
|
||||
obj-$(CONFIG_SOC_DRA7XX) += prm44xx.o $(hwmod-common) $(secure-common)
|
||||
obj-$(CONFIG_SOC_DRA7XX) += $(hwmod-common) $(secure-common)
|
||||
|
||||
ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
|
||||
obj-y += mcbsp.o
|
||||
|
|
|
|||
|
|
@ -131,6 +131,24 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)")
|
|||
.dt_compat = omap3_gp_boards_compat,
|
||||
.restart = omap3xxx_restart,
|
||||
MACHINE_END
|
||||
|
||||
static const char *am3517_boards_compat[] __initdata = {
|
||||
"ti,am3517",
|
||||
NULL,
|
||||
};
|
||||
|
||||
DT_MACHINE_START(AM3517_DT, "Generic AM3517 (Flattened Device Tree)")
|
||||
.reserve = omap_reserve,
|
||||
.map_io = omap3_map_io,
|
||||
.init_early = am35xx_init_early,
|
||||
.init_irq = omap_intc_of_init,
|
||||
.handle_irq = omap3_intc_handle_irq,
|
||||
.init_machine = omap_generic_init,
|
||||
.init_late = omap3_init_late,
|
||||
.init_time = omap3_gptimer_timer_init,
|
||||
.dt_compat = am3517_boards_compat,
|
||||
.restart = omap3xxx_restart,
|
||||
MACHINE_END
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SOC_AM33XX
|
||||
|
|
|
|||
|
|
@ -299,7 +299,6 @@ struct omap_sdrc_params;
|
|||
extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
|
||||
struct omap_sdrc_params *sdrc_cs1);
|
||||
struct omap2_hsmmc_info;
|
||||
extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers);
|
||||
extern void omap_reserve(void);
|
||||
|
||||
struct omap_hwmod;
|
||||
|
|
|
|||
|
|
@ -32,7 +32,6 @@
|
|||
|
||||
#include "soc.h"
|
||||
#include "iomap.h"
|
||||
#include "mux.h"
|
||||
#include "control.h"
|
||||
#include "display.h"
|
||||
#include "prm.h"
|
||||
|
|
@ -102,90 +101,13 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initconst = {
|
|||
{ "dss_hdmi", "omapdss_hdmi", -1 },
|
||||
};
|
||||
|
||||
static void __init omap4_tpd12s015_mux_pads(void)
|
||||
{
|
||||
omap_mux_init_signal("hdmi_cec",
|
||||
OMAP_PIN_INPUT_PULLUP);
|
||||
omap_mux_init_signal("hdmi_ddc_scl",
|
||||
OMAP_PIN_INPUT_PULLUP);
|
||||
omap_mux_init_signal("hdmi_ddc_sda",
|
||||
OMAP_PIN_INPUT_PULLUP);
|
||||
}
|
||||
|
||||
static void __init omap4_hdmi_mux_pads(enum omap_hdmi_flags flags)
|
||||
{
|
||||
u32 reg;
|
||||
u16 control_i2c_1;
|
||||
|
||||
/*
|
||||
* CONTROL_I2C_1: HDMI_DDC_SDA_PULLUPRESX (bit 28) and
|
||||
* HDMI_DDC_SCL_PULLUPRESX (bit 24) are set to disable
|
||||
* internal pull up resistor.
|
||||
*/
|
||||
if (flags & OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP) {
|
||||
control_i2c_1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1;
|
||||
reg = omap4_ctrl_pad_readl(control_i2c_1);
|
||||
reg |= (OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK |
|
||||
OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK);
|
||||
omap4_ctrl_pad_writel(reg, control_i2c_1);
|
||||
}
|
||||
}
|
||||
|
||||
static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
|
||||
{
|
||||
u32 enable_mask, enable_shift;
|
||||
u32 pipd_mask, pipd_shift;
|
||||
u32 reg;
|
||||
|
||||
if (dsi_id == 0) {
|
||||
enable_mask = OMAP4_DSI1_LANEENABLE_MASK;
|
||||
enable_shift = OMAP4_DSI1_LANEENABLE_SHIFT;
|
||||
pipd_mask = OMAP4_DSI1_PIPD_MASK;
|
||||
pipd_shift = OMAP4_DSI1_PIPD_SHIFT;
|
||||
} else if (dsi_id == 1) {
|
||||
enable_mask = OMAP4_DSI2_LANEENABLE_MASK;
|
||||
enable_shift = OMAP4_DSI2_LANEENABLE_SHIFT;
|
||||
pipd_mask = OMAP4_DSI2_PIPD_MASK;
|
||||
pipd_shift = OMAP4_DSI2_PIPD_SHIFT;
|
||||
} else {
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
reg = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
|
||||
|
||||
reg &= ~enable_mask;
|
||||
reg &= ~pipd_mask;
|
||||
|
||||
reg |= (lanes << enable_shift) & enable_mask;
|
||||
reg |= (lanes << pipd_shift) & pipd_mask;
|
||||
|
||||
omap4_ctrl_pad_writel(reg, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int __init omap_hdmi_init(enum omap_hdmi_flags flags)
|
||||
{
|
||||
if (cpu_is_omap44xx()) {
|
||||
omap4_hdmi_mux_pads(flags);
|
||||
omap4_tpd12s015_mux_pads();
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
|
||||
{
|
||||
if (cpu_is_omap44xx())
|
||||
return omap4_dsi_mux_pads(dsi_id, lane_mask);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
|
||||
{
|
||||
if (cpu_is_omap44xx())
|
||||
omap4_dsi_mux_pads(dsi_id, 0);
|
||||
}
|
||||
|
||||
static int omap_dss_set_min_bus_tput(struct device *dev, unsigned long tput)
|
||||
|
|
|
|||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue