From 0fa963553a5c28d8f8aabd8878326d3f782045fc Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Thu, 12 May 2016 18:10:48 +0200 Subject: [PATCH 001/223] s390/bpf: reduce maximum program size to 64 KB The s390 BFP compiler currently uses relative branch instructions that only support jumps up to 64 KB. Examples are "j", "jnz", "cgrj", etc. Currently the maximum size of s390 BPF programs is set to 0x7ffff. If branches over 64 KB are generated the, kernel can crash due to incorrect code. So fix this an reduce the maximum size to 64 KB. Programs larger than that will be interpreted. Fixes: ce2b6ad9c185 ("s390/bpf: increase BPF_SIZE_MAX") Cc: stable@vger.kernel.org # 4.3+ Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/net/bpf_jit_comp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c index 9133b0ec000b..b36c74f4c937 100644 --- a/arch/s390/net/bpf_jit_comp.c +++ b/arch/s390/net/bpf_jit_comp.c @@ -45,7 +45,7 @@ struct bpf_jit { int labels[1]; /* Labels for local jumps */ }; -#define BPF_SIZE_MAX 0x7ffff /* Max size for program (20 bit signed displ) */ +#define BPF_SIZE_MAX 0xffff /* Max size for program (16 bit branches) */ #define SEEN_SKB 1 /* skb access */ #define SEEN_MEM 2 /* use mem[] for temporary storage */ From 6edf0aa4f8bbdfbb4d6d786892fa02728d05dc36 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Wed, 11 May 2016 21:13:13 +0200 Subject: [PATCH 002/223] s390/bpf: fix recache skb->data/hlen for skb_vlan_push/pop In case of usage of skb_vlan_push/pop, in the prologue we store the SKB pointer on the stack and restore it after BPF_JMP_CALL to skb_vlan_push/pop. Unfortunately currently there are two bugs in the code: 1) The wrong stack slot (offset 170 instead of 176) is used 2) The wrong register (W1 instead of B1) is saved So fix this and use correct stack slot and register. Fixes: 9db7f2b81880 ("s390/bpf: recache skb->data/hlen for skb_vlan_push/pop") Cc: stable@vger.kernel.org # 4.3+ Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/net/bpf_jit.h | 4 ++-- arch/s390/net/bpf_jit_comp.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/s390/net/bpf_jit.h b/arch/s390/net/bpf_jit.h index f010c93a88b1..fda605dbc1b4 100644 --- a/arch/s390/net/bpf_jit.h +++ b/arch/s390/net/bpf_jit.h @@ -37,7 +37,7 @@ extern u8 sk_load_word[], sk_load_half[], sk_load_byte[]; * | | | * +---------------+ | * | 8 byte skbp | | - * R15+170 -> +---------------+ | + * R15+176 -> +---------------+ | * | 8 byte hlen | | * R15+168 -> +---------------+ | * | 4 byte align | | @@ -58,7 +58,7 @@ extern u8 sk_load_word[], sk_load_half[], sk_load_byte[]; #define STK_OFF (STK_SPACE - STK_160_UNUSED) #define STK_OFF_TMP 160 /* Offset of tmp buffer on stack */ #define STK_OFF_HLEN 168 /* Offset of SKB header length on stack */ -#define STK_OFF_SKBP 170 /* Offset of SKB pointer on stack */ +#define STK_OFF_SKBP 176 /* Offset of SKB pointer on stack */ #define STK_OFF_R6 (160 - 11 * 8) /* Offset of r6 on stack */ #define STK_OFF_TCCNT (160 - 12 * 8) /* Offset of tail_call_cnt on stack */ diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c index b36c74f4c937..bee281f3163d 100644 --- a/arch/s390/net/bpf_jit_comp.c +++ b/arch/s390/net/bpf_jit_comp.c @@ -450,7 +450,7 @@ static void bpf_jit_prologue(struct bpf_jit *jit) emit_load_skb_data_hlen(jit); if (jit->seen & SEEN_SKB_CHANGE) /* stg %b1,ST_OFF_SKBP(%r0,%r15) */ - EMIT6_DISP_LH(0xe3000000, 0x0024, REG_W1, REG_0, REG_15, + EMIT6_DISP_LH(0xe3000000, 0x0024, BPF_REG_1, REG_0, REG_15, STK_OFF_SKBP); } From d462e32259810aaaf13440b033b99e1aad33eccd Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 18 May 2016 13:39:05 +0300 Subject: [PATCH 003/223] crypto: omap-sham - potential Oops on error in probe This if statement is reversed so we end up either leaking or Oopsing on error. Fixes: dbe246209bc1 ('crypto: omap-sham - Use dma_request_chan() for requesting DMA channel') Signed-off-by: Dan Carpenter Acked-by: Peter Ujfalusi Signed-off-by: Herbert Xu --- drivers/crypto/omap-sham.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c index 6eefaa2fe58f..63464e86f2b1 100644 --- a/drivers/crypto/omap-sham.c +++ b/drivers/crypto/omap-sham.c @@ -1986,7 +1986,7 @@ err_algs: &dd->pdata->algs_info[i].algs_list[j]); err_pm: pm_runtime_disable(dev); - if (dd->polling_mode) + if (!dd->polling_mode) dma_release_channel(dd->dma_lch); data_err: dev_err(dev, "initialization failed.\n"); From bad6a185b4d6f81d0ed2b6e4c16307969f160b95 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 18 May 2016 16:55:56 +0200 Subject: [PATCH 004/223] crypto: public_key: select CRYPTO_AKCIPHER In some rare randconfig builds, we can end up with ASYMMETRIC_PUBLIC_KEY_SUBTYPE enabled but CRYPTO_AKCIPHER disabled, which fails to link because of the reference to crypto_alloc_akcipher: crypto/built-in.o: In function `public_key_verify_signature': :(.text+0x110e4): undefined reference to `crypto_alloc_akcipher' This adds a Kconfig 'select' statement to ensure the dependency is always there. Cc: Signed-off-by: Arnd Bergmann Signed-off-by: Herbert Xu --- crypto/asymmetric_keys/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/crypto/asymmetric_keys/Kconfig b/crypto/asymmetric_keys/Kconfig index 91a7e047a765..477cbf39e0fb 100644 --- a/crypto/asymmetric_keys/Kconfig +++ b/crypto/asymmetric_keys/Kconfig @@ -13,6 +13,7 @@ config ASYMMETRIC_PUBLIC_KEY_SUBTYPE tristate "Asymmetric public-key crypto algorithm subtype" select MPILIB select CRYPTO_HASH_INFO + select CRYPTO_AKCIPHER help This option provides support for asymmetric public key type handling. If signature generation and/or verification are to be used, From a621bac3044ed6f7ec5fa0326491b2d4838bfa93 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 13 May 2016 12:04:06 -0700 Subject: [PATCH 005/223] scsi_lib: correctly retry failed zero length REQ_TYPE_FS commands When SCSI was written, all commands coming from the filesystem (REQ_TYPE_FS commands) had data. This meant that our signal for needing to complete the command was the number of bytes completed being equal to the number of bytes in the request. Unfortunately, with the advent of flush barriers, we can now get zero length REQ_TYPE_FS commands, which confuse this logic because they satisfy the condition every time. This means they never get retried even for retryable conditions, like UNIT ATTENTION because we complete them early assuming they're done. Fix this by special casing the early completion condition to recognise zero length commands with errors and let them drop through to the retry code. Cc: stable@vger.kernel.org Reported-by: Sebastian Parschauer Signed-off-by: James E.J. Bottomley Tested-by: Jack Wang Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_lib.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index b2e332af0f51..c71344aebdbb 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -821,9 +821,12 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) } /* - * If we finished all bytes in the request we are done now. + * special case: failed zero length commands always need to + * drop down into the retry code. Otherwise, if we finished + * all bytes in the request we are done now. */ - if (!scsi_end_request(req, error, good_bytes, 0)) + if (!(blk_rq_bytes(req) == 0 && error) && + !scsi_end_request(req, error, good_bytes, 0)) return; /* From eb72d0bb84eee5d0dc3044fd17b75e7101dabb57 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Tue, 26 Apr 2016 08:06:58 +0200 Subject: [PATCH 006/223] sd: get disk reference in sd_check_events() sd_check_events() is called asynchronously, and might race with device removal. So always take a disk reference when processing the event to avoid the device being removed while the event is processed. Signed-off-by: Hannes Reinecke Reviewed-by: Ewan D. Milne Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/sd.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 428c03ef02b2..f459dff30512 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1398,11 +1398,15 @@ static int media_not_present(struct scsi_disk *sdkp, **/ static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing) { - struct scsi_disk *sdkp = scsi_disk(disk); - struct scsi_device *sdp = sdkp->device; + struct scsi_disk *sdkp = scsi_disk_get(disk); + struct scsi_device *sdp; struct scsi_sense_hdr *sshdr = NULL; int retval; + if (!sdkp) + return 0; + + sdp = sdkp->device; SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_check_events\n")); /* @@ -1459,6 +1463,7 @@ out: kfree(sshdr); retval = sdp->changed ? DISK_EVENT_MEDIA_CHANGE : 0; sdp->changed = 0; + scsi_disk_put(sdkp); return retval; } From 7ebd67e0dece0ec53e5541fc600eda4e050fab72 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 12 May 2016 23:37:38 +0300 Subject: [PATCH 007/223] mpt3sas: add missing curly braces There are some missing curly braces on this if statement, so we end up printing when we shouldn't. Fixes: a470a51cd648 ('mpt3sas: Handle active cable exception event') Signed-off-by: Dan Carpenter Acked-by: Chaitra P B Signed-off-by: Martin K. Petersen --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 6a4df5a315e9..6bff13e7afc7 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -7975,13 +7975,14 @@ mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, ActiveCableEventData = (Mpi26EventDataActiveCableExcept_t *) mpi_reply->EventData; if (ActiveCableEventData->ReasonCode == - MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER) + MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER) { pr_info(MPT3SAS_FMT "Currently an active cable with ReceptacleID %d", ioc->name, ActiveCableEventData->ReceptacleID); pr_info("cannot be powered and devices connected to this active cable"); pr_info("will not be seen. This active cable"); pr_info("requires %d mW of power", ActiveCableEventData->ActiveCablePowerRequirement); + } break; default: /* ignore the rest */ From 787ab6e97024926f38773287d9f98a9b330bce23 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Wed, 18 May 2016 10:16:51 +0200 Subject: [PATCH 008/223] aacraid: do not activate events on non-SRC adapters Only SRC-based adapters support the AifReqEvent function, so there is no point in trying to activate it on older, non-SRC based adapters. Doing so lead to crashes on older adapters. Signed-off-by: Hannes Reinecke Reviewed-by: Johannes Thumshirn Reviewed-by: Raghava Aditya Renukunta Signed-off-by: Martin K. Petersen --- drivers/scsi/aacraid/aacraid.h | 5 +++++ drivers/scsi/aacraid/linit.c | 11 ++++++----- 2 files changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 8f90d9e77104..969c312de1be 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -620,6 +620,11 @@ struct aac_driver_ident */ #define AAC_QUIRK_SCSI_32 0x0020 +/* + * SRC based adapters support the AifReqEvent functions + */ +#define AAC_QUIRK_SRC 0x0040 + /* * The adapter interface specs all queues to be located in the same * physically contiguous block. The host structure that defines the diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index a943bd230bc2..79871f3519ff 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -236,10 +236,10 @@ static struct aac_driver_ident aac_drivers[] = { { aac_rx_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec Catch All */ { aac_rkt_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec Rocket Catch All */ { aac_nark_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec NEMER/ARK Catch All */ - { aac_src_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec PMC Series 6 (Tupelo) */ - { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec PMC Series 7 (Denali) */ - { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec PMC Series 8 */ - { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2 } /* Adaptec PMC Series 9 */ + { aac_src_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC }, /* Adaptec PMC Series 6 (Tupelo) */ + { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC }, /* Adaptec PMC Series 7 (Denali) */ + { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC }, /* Adaptec PMC Series 8 */ + { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC } /* Adaptec PMC Series 9 */ }; /** @@ -1299,7 +1299,8 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) else shost->this_id = shost->max_id; - aac_intr_normal(aac, 0, 2, 0, NULL); + if (aac_drivers[index].quirks & AAC_QUIRK_SRC) + aac_intr_normal(aac, 0, 2, 0, NULL); /* * dmb - we may need to move the setting of these parms somewhere else once From e9bc15f28e5f0db44aba609780d6850eabefbf11 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 13 Jan 2016 10:45:44 +0100 Subject: [PATCH 009/223] s390/config: update default configuration Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/configs/default_defconfig | 44 ++++++++++++++++--------- arch/s390/configs/gcov_defconfig | 36 +++++++++++--------- arch/s390/configs/performance_defconfig | 38 ++++++++++++--------- arch/s390/configs/zfcpdump_defconfig | 4 +-- arch/s390/defconfig | 44 +++++++++++++++---------- 5 files changed, 100 insertions(+), 66 deletions(-) diff --git a/arch/s390/configs/default_defconfig b/arch/s390/configs/default_defconfig index 0ac42cc4f880..d5ec71b2ed02 100644 --- a/arch/s390/configs/default_defconfig +++ b/arch/s390/configs/default_defconfig @@ -1,8 +1,7 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y -CONFIG_FHANDLE=y CONFIG_AUDIT=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y @@ -13,19 +12,19 @@ CONFIG_TASK_IO_ACCOUNTING=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_NUMA_BALANCING=y -CONFIG_CGROUP_FREEZER=y -CONFIG_CGROUP_PIDS=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CPUSETS=y -CONFIG_CGROUP_CPUACCT=y CONFIG_MEMCG=y CONFIG_MEMCG_SWAP=y -CONFIG_MEMCG_KMEM=y -CONFIG_CGROUP_HUGETLB=y -CONFIG_CGROUP_PERF=y +CONFIG_BLK_CGROUP=y CONFIG_CFS_BANDWIDTH=y CONFIG_RT_GROUP_SCHED=y -CONFIG_BLK_CGROUP=y +CONFIG_CGROUP_PIDS=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_HUGETLB=y +CONFIG_CPUSETS=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_PERF=y +CONFIG_CHECKPOINT_RESTORE=y CONFIG_NAMESPACES=y CONFIG_USER_NS=y CONFIG_SCHED_AUTOGROUP=y @@ -55,7 +54,6 @@ CONFIG_UNIXWARE_DISKLABEL=y CONFIG_CFQ_GROUP_IOSCHED=y CONFIG_DEFAULT_DEADLINE=y CONFIG_LIVEPATCH=y -CONFIG_MARCH_Z196=y CONFIG_TUNE_ZEC12=y CONFIG_NR_CPUS=256 CONFIG_NUMA=y @@ -65,6 +63,15 @@ CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTREMOVE=y CONFIG_KSM=y CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_CLEANCACHE=y +CONFIG_FRONTSWAP=y +CONFIG_CMA=y +CONFIG_MEM_SOFT_DIRTY=y +CONFIG_ZPOOL=m +CONFIG_ZBUD=m +CONFIG_ZSMALLOC=m +CONFIG_ZSMALLOC_STAT=y +CONFIG_IDLE_PAGE_TRACKING=y CONFIG_PCI=y CONFIG_PCI_DEBUG=y CONFIG_HOTPLUG_PCI=y @@ -452,6 +459,7 @@ CONFIG_HW_RANDOM_VIRTIO=m CONFIG_RAW_DRIVER=m CONFIG_HANGCHECK_TIMER=m CONFIG_TN3270_FS=y +# CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_SOFT_WATCHDOG=m @@ -537,6 +545,8 @@ CONFIG_DLM=m CONFIG_PRINTK_TIME=y CONFIG_DYNAMIC_DEBUG=y CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF4=y +CONFIG_GDB_SCRIPTS=y CONFIG_FRAME_WARN=1024 CONFIG_READABLE_ASM=y CONFIG_UNUSED_SYMBOLS=y @@ -555,13 +565,17 @@ CONFIG_SLUB_DEBUG_ON=y CONFIG_SLUB_STATS=y CONFIG_DEBUG_STACK_USAGE=y CONFIG_DEBUG_VM=y +CONFIG_DEBUG_VM_VMACACHE=y CONFIG_DEBUG_VM_RB=y +CONFIG_DEBUG_VM_PGFLAGS=y CONFIG_DEBUG_MEMORY_INIT=y CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m CONFIG_DEBUG_PER_CPU_MAPS=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_HUNG_TASK=y +CONFIG_WQ_WATCHDOG=y CONFIG_PANIC_ON_OOPS=y +CONFIG_DEBUG_TIMEKEEPING=y CONFIG_TIMER_STATS=y CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y @@ -596,6 +610,8 @@ CONFIG_FTRACE_SYSCALLS=y CONFIG_STACK_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_UPROBE_EVENT=y +CONFIG_FUNCTION_PROFILER=y +CONFIG_TRACE_ENUM_MAP_FILE=y CONFIG_LKDTM=m CONFIG_TEST_LIST_SORT=y CONFIG_KPROBES_SANITY_TEST=y @@ -607,7 +623,6 @@ CONFIG_TEST_STRING_HELPERS=y CONFIG_TEST_KSTRTOX=y CONFIG_DMA_API_DEBUG=y CONFIG_TEST_BPF=m -# CONFIG_STRICT_DEVMEM is not set CONFIG_S390_PTDUMP=y CONFIG_ENCRYPTED_KEYS=m CONFIG_SECURITY=y @@ -651,7 +666,6 @@ CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_ZLIB=y CONFIG_CRYPTO_LZO=m CONFIG_CRYPTO_LZ4=m CONFIG_CRYPTO_LZ4HC=m @@ -664,7 +678,7 @@ CONFIG_CRYPTO_SHA512_S390=m CONFIG_CRYPTO_DES_S390=m CONFIG_CRYPTO_AES_S390=m CONFIG_CRYPTO_GHASH_S390=m -CONFIG_ASYMMETRIC_KEY_TYPE=m +CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m CONFIG_X509_CERTIFICATE_PARSER=m CONFIG_CRC7=m diff --git a/arch/s390/configs/gcov_defconfig b/arch/s390/configs/gcov_defconfig index a31dcd56f7c0..f46a35115d2d 100644 --- a/arch/s390/configs/gcov_defconfig +++ b/arch/s390/configs/gcov_defconfig @@ -1,8 +1,7 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y -CONFIG_FHANDLE=y CONFIG_AUDIT=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y @@ -13,17 +12,17 @@ CONFIG_TASK_IO_ACCOUNTING=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_NUMA_BALANCING=y -CONFIG_CGROUP_FREEZER=y -CONFIG_CGROUP_PIDS=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CPUSETS=y -CONFIG_CGROUP_CPUACCT=y CONFIG_MEMCG=y CONFIG_MEMCG_SWAP=y -CONFIG_MEMCG_KMEM=y -CONFIG_CGROUP_HUGETLB=y -CONFIG_CGROUP_PERF=y CONFIG_BLK_CGROUP=y +CONFIG_CGROUP_PIDS=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_HUGETLB=y +CONFIG_CPUSETS=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_PERF=y +CONFIG_CHECKPOINT_RESTORE=y CONFIG_NAMESPACES=y CONFIG_USER_NS=y CONFIG_SCHED_AUTOGROUP=y @@ -53,7 +52,6 @@ CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y CONFIG_CFQ_GROUP_IOSCHED=y CONFIG_DEFAULT_DEADLINE=y -CONFIG_MARCH_Z196=y CONFIG_TUNE_ZEC12=y CONFIG_NR_CPUS=256 CONFIG_NUMA=y @@ -62,6 +60,14 @@ CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTREMOVE=y CONFIG_KSM=y CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_CLEANCACHE=y +CONFIG_FRONTSWAP=y +CONFIG_CMA=y +CONFIG_ZSWAP=y +CONFIG_ZBUD=m +CONFIG_ZSMALLOC=m +CONFIG_ZSMALLOC_STAT=y +CONFIG_IDLE_PAGE_TRACKING=y CONFIG_PCI=y CONFIG_HOTPLUG_PCI=y CONFIG_HOTPLUG_PCI_S390=y @@ -530,6 +536,8 @@ CONFIG_NLS_UTF8=m CONFIG_DLM=m CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF4=y +CONFIG_GDB_SCRIPTS=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 CONFIG_UNUSED_SYMBOLS=y @@ -547,13 +555,13 @@ CONFIG_LATENCYTOP=y CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y CONFIG_BLK_DEV_IO_TRACE=y # CONFIG_KPROBE_EVENT is not set +CONFIG_TRACE_ENUM_MAP_FILE=y CONFIG_LKDTM=m CONFIG_RBTREE_TEST=m CONFIG_INTERVAL_TREE_TEST=m CONFIG_PERCPU_TEST=m CONFIG_ATOMIC64_SELFTEST=y CONFIG_TEST_BPF=m -# CONFIG_STRICT_DEVMEM is not set CONFIG_S390_PTDUMP=y CONFIG_ENCRYPTED_KEYS=m CONFIG_SECURITY=y @@ -597,8 +605,6 @@ CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_ZLIB=y -CONFIG_CRYPTO_LZO=m CONFIG_CRYPTO_LZ4=m CONFIG_CRYPTO_LZ4HC=m CONFIG_CRYPTO_USER_API_HASH=m @@ -610,7 +616,7 @@ CONFIG_CRYPTO_SHA512_S390=m CONFIG_CRYPTO_DES_S390=m CONFIG_CRYPTO_AES_S390=m CONFIG_CRYPTO_GHASH_S390=m -CONFIG_ASYMMETRIC_KEY_TYPE=m +CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m CONFIG_X509_CERTIFICATE_PARSER=m CONFIG_CRC7=m diff --git a/arch/s390/configs/performance_defconfig b/arch/s390/configs/performance_defconfig index 7b73bf353345..ba0f2a58b8cd 100644 --- a/arch/s390/configs/performance_defconfig +++ b/arch/s390/configs/performance_defconfig @@ -1,8 +1,7 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y -CONFIG_FHANDLE=y CONFIG_AUDIT=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y @@ -14,17 +13,17 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_NUMA_BALANCING=y # CONFIG_NUMA_BALANCING_DEFAULT_ENABLED is not set -CONFIG_CGROUP_FREEZER=y -CONFIG_CGROUP_PIDS=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CPUSETS=y -CONFIG_CGROUP_CPUACCT=y CONFIG_MEMCG=y CONFIG_MEMCG_SWAP=y -CONFIG_MEMCG_KMEM=y -CONFIG_CGROUP_HUGETLB=y -CONFIG_CGROUP_PERF=y CONFIG_BLK_CGROUP=y +CONFIG_CGROUP_PIDS=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_HUGETLB=y +CONFIG_CPUSETS=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_PERF=y +CONFIG_CHECKPOINT_RESTORE=y CONFIG_NAMESPACES=y CONFIG_USER_NS=y CONFIG_SCHED_AUTOGROUP=y @@ -53,7 +52,6 @@ CONFIG_UNIXWARE_DISKLABEL=y CONFIG_CFQ_GROUP_IOSCHED=y CONFIG_DEFAULT_DEADLINE=y CONFIG_LIVEPATCH=y -CONFIG_MARCH_Z196=y CONFIG_TUNE_ZEC12=y CONFIG_NR_CPUS=512 CONFIG_NUMA=y @@ -62,6 +60,14 @@ CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTREMOVE=y CONFIG_KSM=y CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_CLEANCACHE=y +CONFIG_FRONTSWAP=y +CONFIG_CMA=y +CONFIG_ZSWAP=y +CONFIG_ZBUD=m +CONFIG_ZSMALLOC=m +CONFIG_ZSMALLOC_STAT=y +CONFIG_IDLE_PAGE_TRACKING=y CONFIG_PCI=y CONFIG_HOTPLUG_PCI=y CONFIG_HOTPLUG_PCI_S390=y @@ -447,6 +453,7 @@ CONFIG_HW_RANDOM_VIRTIO=m CONFIG_RAW_DRIVER=m CONFIG_HANGCHECK_TIMER=m CONFIG_TN3270_FS=y +# CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_SOFT_WATCHDOG=m @@ -530,6 +537,8 @@ CONFIG_NLS_UTF8=m CONFIG_DLM=m CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF4=y +CONFIG_GDB_SCRIPTS=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 CONFIG_UNUSED_SYMBOLS=y @@ -546,11 +555,12 @@ CONFIG_FTRACE_SYSCALLS=y CONFIG_STACK_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_UPROBE_EVENT=y +CONFIG_FUNCTION_PROFILER=y +CONFIG_TRACE_ENUM_MAP_FILE=y CONFIG_LKDTM=m CONFIG_PERCPU_TEST=m CONFIG_ATOMIC64_SELFTEST=y CONFIG_TEST_BPF=m -# CONFIG_STRICT_DEVMEM is not set CONFIG_S390_PTDUMP=y CONFIG_ENCRYPTED_KEYS=m CONFIG_SECURITY=y @@ -594,8 +604,6 @@ CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_ZLIB=y -CONFIG_CRYPTO_LZO=m CONFIG_CRYPTO_LZ4=m CONFIG_CRYPTO_LZ4HC=m CONFIG_CRYPTO_USER_API_HASH=m @@ -607,7 +615,7 @@ CONFIG_CRYPTO_SHA512_S390=m CONFIG_CRYPTO_DES_S390=m CONFIG_CRYPTO_AES_S390=m CONFIG_CRYPTO_GHASH_S390=m -CONFIG_ASYMMETRIC_KEY_TYPE=m +CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m CONFIG_X509_CERTIFICATE_PARSER=m CONFIG_CRC7=m diff --git a/arch/s390/configs/zfcpdump_defconfig b/arch/s390/configs/zfcpdump_defconfig index 1719843a55a2..4366a3e3e754 100644 --- a/arch/s390/configs/zfcpdump_defconfig +++ b/arch/s390/configs/zfcpdump_defconfig @@ -1,5 +1,5 @@ # CONFIG_SWAP is not set -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BLK_DEV_INITRD=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -7,7 +7,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_PARTITION_ADVANCED=y CONFIG_IBM_PARTITION=y CONFIG_DEFAULT_DEADLINE=y -CONFIG_MARCH_Z196=y CONFIG_TUNE_ZEC12=y # CONFIG_COMPAT is not set CONFIG_NR_CPUS=2 @@ -64,7 +63,6 @@ CONFIG_PANIC_ON_OOPS=y # CONFIG_SCHED_DEBUG is not set CONFIG_RCU_CPU_STALL_TIMEOUT=60 # CONFIG_FTRACE is not set -# CONFIG_STRICT_DEVMEM is not set # CONFIG_PFAULT is not set # CONFIG_S390_HYPFS_FS is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/s390/defconfig b/arch/s390/defconfig index e24f2af4c73b..3f571ea89509 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -1,8 +1,8 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y -CONFIG_FHANDLE=y +CONFIG_USELIB=y CONFIG_AUDIT=y -CONFIG_NO_HZ=y +CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y @@ -11,19 +11,19 @@ CONFIG_TASK_IO_ACCOUNTING=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CGROUPS=y -CONFIG_CGROUP_FREEZER=y -CONFIG_CGROUP_PIDS=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CPUSETS=y -CONFIG_CGROUP_CPUACCT=y CONFIG_MEMCG=y CONFIG_MEMCG_SWAP=y -CONFIG_MEMCG_KMEM=y -CONFIG_CGROUP_HUGETLB=y -CONFIG_CGROUP_PERF=y +CONFIG_BLK_CGROUP=y CONFIG_CGROUP_SCHED=y CONFIG_RT_GROUP_SCHED=y -CONFIG_BLK_CGROUP=y +CONFIG_CGROUP_PIDS=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_HUGETLB=y +CONFIG_CPUSETS=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_PERF=y +CONFIG_CHECKPOINT_RESTORE=y CONFIG_NAMESPACES=y CONFIG_USER_NS=y CONFIG_BLK_DEV_INITRD=y @@ -44,7 +44,6 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_IBM_PARTITION=y CONFIG_DEFAULT_DEADLINE=y CONFIG_LIVEPATCH=y -CONFIG_MARCH_Z196=y CONFIG_NR_CPUS=256 CONFIG_NUMA=y CONFIG_HZ_100=y @@ -52,6 +51,14 @@ CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTREMOVE=y CONFIG_KSM=y CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_CLEANCACHE=y +CONFIG_FRONTSWAP=y +CONFIG_CMA=y +CONFIG_ZSWAP=y +CONFIG_ZBUD=m +CONFIG_ZSMALLOC=m +CONFIG_ZSMALLOC_STAT=y +CONFIG_IDLE_PAGE_TRACKING=y CONFIG_CRASH_DUMP=y CONFIG_BINFMT_MISC=m CONFIG_HIBERNATION=y @@ -61,7 +68,6 @@ CONFIG_UNIX=y CONFIG_NET_KEY=y CONFIG_INET=y CONFIG_IP_MULTICAST=y -# CONFIG_INET_LRO is not set CONFIG_L2TP=m CONFIG_L2TP_DEBUGFS=m CONFIG_VLAN_8021Q=y @@ -144,6 +150,9 @@ CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y # CONFIG_NETWORK_FILESYSTEMS is not set +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF4=y +CONFIG_GDB_SCRIPTS=y CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y @@ -158,20 +167,21 @@ CONFIG_LOCK_STAT=y CONFIG_DEBUG_LOCKDEP=y CONFIG_DEBUG_ATOMIC_SLEEP=y CONFIG_DEBUG_LIST=y -CONFIG_DEBUG_PI_LIST=y CONFIG_DEBUG_SG=y CONFIG_DEBUG_NOTIFIERS=y CONFIG_RCU_CPU_STALL_TIMEOUT=60 CONFIG_RCU_TRACE=y CONFIG_LATENCYTOP=y CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y -CONFIG_TRACER_SNAPSHOT=y +CONFIG_SCHED_TRACER=y +CONFIG_FTRACE_SYSCALLS=y CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y CONFIG_STACK_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_UPROBE_EVENT=y +CONFIG_FUNCTION_PROFILER=y +CONFIG_TRACE_ENUM_MAP_FILE=y CONFIG_KPROBES_SANITY_TEST=y -# CONFIG_STRICT_DEVMEM is not set CONFIG_S390_PTDUMP=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m @@ -212,8 +222,6 @@ CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_ZLIB=m -CONFIG_CRYPTO_LZO=m CONFIG_CRYPTO_LZ4=m CONFIG_CRYPTO_LZ4HC=m CONFIG_CRYPTO_ANSI_CPRNG=m From cf0d44d513f275be9ce42158079d4257e8973889 Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Mon, 23 May 2016 15:35:51 +0200 Subject: [PATCH 010/223] s390: fix info leak in do_sigsegv Aleksa has reported incorrect si_errno value when stracing task which received SIGSEGV: [pid 20799] --- SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_MAPERR, si_errno=2510266, si_addr=0x100000000000000} The reason seems to be that do_sigsegv is not initializing siginfo structure defined on the stack completely so it will leak 4B of the previous stack content. Fix it simply by initializing si_errno to 0 (same as do_sigbus does already). Cc: stable # introduced pre-git times Reported-by: Aleksa Sarai Signed-off-by: Michal Hocko Signed-off-by: Martin Schwidefsky --- arch/s390/mm/fault.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 7a3144017301..19288c1b36d3 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -250,6 +250,7 @@ static noinline void do_sigsegv(struct pt_regs *regs, int si_code) report_user_fault(regs, SIGSEGV, 1); si.si_signo = SIGSEGV; + si.si_errno = 0; si.si_code = si_code; si.si_addr = (void __user *)(regs->int_parm_long & __FAIL_ADDR_MASK); force_sig_info(SIGSEGV, &si, current); From bbf178e0a0a323d896611905718db112b1ab1807 Mon Sep 17 00:00:00 2001 From: "xypron.glpk@gmx.de" Date: Wed, 18 May 2016 20:40:51 +0200 Subject: [PATCH 011/223] net: pegasus: simplify logical constraint If !count is true, count < 4 is also true. Signed-off-by: Heinrich Schuchardt Signed-off-by: David S. Miller --- drivers/net/usb/pegasus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c index 36cd7f016a8d..9bbe0161a2f4 100644 --- a/drivers/net/usb/pegasus.c +++ b/drivers/net/usb/pegasus.c @@ -473,7 +473,7 @@ static void read_bulk_callback(struct urb *urb) goto goon; } - if (!count || count < 4) + if (count < 4) goto goon; rx_status = buf[count - 2]; From c685293aa379b9d17e44fcc2f96a402b7648e838 Mon Sep 17 00:00:00 2001 From: Stefan Hajnoczi Date: Wed, 18 May 2016 17:42:13 -0700 Subject: [PATCH 012/223] net/atm: sk_err_soft must be positive The sk_err and sk_err_soft fields are positive errno values and userspace applications rely on this when using getsockopt(SO_ERROR). ATM code places an -errno into sk_err_soft in sigd_send() and returns it from svc_addparty()/svc_dropparty(). Although I am not familiar with ATM code I came to this conclusion because: 1. sigd_send() msg->type cases as_okay and as_error both have: sk->sk_err = -msg->reply; while the as_addparty and as_dropparty cases have: sk->sk_err_soft = msg->reply; This is the source of the inconsistency. 2. svc_addparty() returns an -errno and assumes sk_err_soft is also an -errno: if (flags & O_NONBLOCK) { error = -EINPROGRESS; goto out; } ... error = xchg(&sk->sk_err_soft, 0); out: release_sock(sk); return error; This shows that sk_err_soft is indeed being treated as an -errno. This patch ensures that sk_err_soft is always a positive errno. Signed-off-by: Stefan Hajnoczi Signed-off-by: David S. Miller --- net/atm/signaling.c | 2 +- net/atm/svc.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/net/atm/signaling.c b/net/atm/signaling.c index 4fd6af47383a..adb6e3d21b1e 100644 --- a/net/atm/signaling.c +++ b/net/atm/signaling.c @@ -124,7 +124,7 @@ as_indicate_complete: break; case as_addparty: case as_dropparty: - sk->sk_err_soft = msg->reply; + sk->sk_err_soft = -msg->reply; /* < 0 failure, otherwise ep_ref */ clear_bit(ATM_VF_WAITING, &vcc->flags); break; diff --git a/net/atm/svc.c b/net/atm/svc.c index 3fa0a9ee98d1..878563a8354d 100644 --- a/net/atm/svc.c +++ b/net/atm/svc.c @@ -546,7 +546,7 @@ static int svc_addparty(struct socket *sock, struct sockaddr *sockaddr, schedule(); } finish_wait(sk_sleep(sk), &wait); - error = xchg(&sk->sk_err_soft, 0); + error = -xchg(&sk->sk_err_soft, 0); out: release_sock(sk); return error; @@ -573,7 +573,7 @@ static int svc_dropparty(struct socket *sock, int ep_ref) error = -EUNATCH; goto out; } - error = xchg(&sk->sk_err_soft, 0); + error = -xchg(&sk->sk_err_soft, 0); out: release_sock(sk); return error; From 8da07a393f48864a87c61bb1dfbee640d9b97fd6 Mon Sep 17 00:00:00 2001 From: "xypron.glpk@gmx.de" Date: Thu, 19 May 2016 21:20:55 +0200 Subject: [PATCH 013/223] net: hns: avoid null pointer dereference In the statement assert(priv || priv->ae_handle); the right side of || is only evaluated if priv is null. v2: As suggested by David Leight and David Miller the assert statements are removed. Signed-off-by: Heinrich Schuchardt Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c index 3d746c887873..67a648c7d3a9 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c @@ -46,7 +46,6 @@ static u32 hns_nic_get_link(struct net_device *net_dev) u32 link_stat = priv->link; struct hnae_handle *h; - assert(priv && priv->ae_handle); h = priv->ae_handle; if (priv->phy) { @@ -646,8 +645,6 @@ static void hns_nic_get_drvinfo(struct net_device *net_dev, { struct hns_nic_priv *priv = netdev_priv(net_dev); - assert(priv); - strncpy(drvinfo->version, HNAE_DRIVER_VERSION, sizeof(drvinfo->version)); drvinfo->version[sizeof(drvinfo->version) - 1] = '\0'; @@ -720,8 +717,6 @@ static int hns_set_pauseparam(struct net_device *net_dev, struct hnae_handle *h; struct hnae_ae_ops *ops; - assert(priv || priv->ae_handle); - h = priv->ae_handle; ops = h->dev->ops; @@ -780,8 +775,6 @@ static int hns_set_coalesce(struct net_device *net_dev, struct hnae_ae_ops *ops; int ret; - assert(priv || priv->ae_handle); - ops = priv->ae_handle->dev->ops; if (ec->tx_coalesce_usecs != ec->rx_coalesce_usecs) @@ -1111,8 +1104,6 @@ void hns_get_regs(struct net_device *net_dev, struct ethtool_regs *cmd, struct hns_nic_priv *priv = netdev_priv(net_dev); struct hnae_ae_ops *ops; - assert(priv || priv->ae_handle); - ops = priv->ae_handle->dev->ops; cmd->version = HNS_CHIP_VERSION; @@ -1135,8 +1126,6 @@ static int hns_get_regs_len(struct net_device *net_dev) struct hns_nic_priv *priv = netdev_priv(net_dev); struct hnae_ae_ops *ops; - assert(priv || priv->ae_handle); - ops = priv->ae_handle->dev->ops; if (!ops->get_regs_len) { netdev_err(net_dev, "ops->get_regs_len is null!\n"); From 2ece068e1b1d6e76ecd07e04b027013e931287ff Mon Sep 17 00:00:00 2001 From: Muhammad Falak R Wani Date: Fri, 20 May 2016 17:51:02 +0530 Subject: [PATCH 014/223] ptp: use memdup_user(). Use memdup_user to duplicate a memory region from user-space to kernel-space, instead of open coding using kmalloc & copy_from_user. Signed-off-by: Muhammad Falak R Wani Acked-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/ptp/ptp_chardev.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/drivers/ptp/ptp_chardev.c b/drivers/ptp/ptp_chardev.c index 579fd65299a0..0b1ac6be69ce 100644 --- a/drivers/ptp/ptp_chardev.c +++ b/drivers/ptp/ptp_chardev.c @@ -208,14 +208,9 @@ long ptp_ioctl(struct posix_clock *pc, unsigned int cmd, unsigned long arg) break; case PTP_SYS_OFFSET: - sysoff = kmalloc(sizeof(*sysoff), GFP_KERNEL); - if (!sysoff) { - err = -ENOMEM; - break; - } - if (copy_from_user(sysoff, (void __user *)arg, - sizeof(*sysoff))) { - err = -EFAULT; + sysoff = memdup_user((void __user *)arg, sizeof(*sysoff)); + if (IS_ERR(sysoff)) { + err = PTR_ERR(sysoff); break; } if (sysoff->n_samples > PTP_MAX_SAMPLES) { From 049bbf589ec651685205bd8ce73221fdd62345cf Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Fri, 20 May 2016 13:21:10 -0300 Subject: [PATCH 015/223] ipv4: Fix non-initialized TTL when CONFIG_SYSCTL=n Commit fa50d974d104 ("ipv4: Namespaceify ip_default_ttl sysctl knob") moves the default TTL assignment, and as side-effect IPv4 TTL now has a default value only if sysctl support is enabled (CONFIG_SYSCTL=y). The sysctl_ip_default_ttl is fundamental for IP to work properly, as it provides the TTL to be used as default. The defautl TTL may be used in ip_selected_ttl, through the following flow: ip_select_ttl ip4_dst_hoplimit net->ipv4.sysctl_ip_default_ttl This commit fixes the issue by assigning net->ipv4.sysctl_ip_default_ttl in net_init_net, called during ipv4's initialization. Without this commit, a kernel built without sysctl support will send all IP packets with zero TTL (unless a TTL is explicitly set, e.g. with setsockopt). Given a similar issue might appear on the other knobs that were namespaceify, this commit also moves them. Fixes: fa50d974d104 ("ipv4: Namespaceify ip_default_ttl sysctl knob") Signed-off-by: Ezequiel Garcia Signed-off-by: David S. Miller --- net/ipv4/af_inet.c | 8 ++++++++ net/ipv4/sysctl_net_ipv4.c | 4 ---- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index 377424ea17a4..d39e9e47a26e 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -1681,6 +1681,14 @@ static __net_init int inet_init_net(struct net *net) */ net->ipv4.ping_group_range.range[0] = make_kgid(&init_user_ns, 1); net->ipv4.ping_group_range.range[1] = make_kgid(&init_user_ns, 0); + + /* Default values for sysctl-controlled parameters. + * We set them here, in case sysctl is not compiled. + */ + net->ipv4.sysctl_ip_default_ttl = IPDEFTTL; + net->ipv4.sysctl_ip_dynaddr = 0; + net->ipv4.sysctl_ip_early_demux = 1; + return 0; } diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c index bb0419582b8d..1cb67de106fe 100644 --- a/net/ipv4/sysctl_net_ipv4.c +++ b/net/ipv4/sysctl_net_ipv4.c @@ -999,10 +999,6 @@ static __net_init int ipv4_sysctl_init_net(struct net *net) if (!net->ipv4.sysctl_local_reserved_ports) goto err_ports; - net->ipv4.sysctl_ip_default_ttl = IPDEFTTL; - net->ipv4.sysctl_ip_dynaddr = 0; - net->ipv4.sysctl_ip_early_demux = 1; - return 0; err_ports: From 156f4fbcc2bd1ce38da483f932d3963ba9a79ad0 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 22 May 2016 11:06:09 +0200 Subject: [PATCH 016/223] MAINTAINERS: Add file patterns for net device tree bindings Submitters of device tree binding documentation may forget to CC the subsystem maintainer if this is missing. Signed-off-by: Geert Uytterhoeven Cc: David S. Miller Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 5f83015ff016..8d397157981c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7832,6 +7832,7 @@ Q: http://patchwork.ozlabs.org/project/netdev/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git S: Odd Fixes +F: Documentation/devicetree/bindings/net/ F: drivers/net/ F: include/linux/if_* F: include/linux/netdevice.h From 612bacad78ba6d0a91166fc4487af114bac172a8 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Sun, 22 May 2016 23:16:18 +0200 Subject: [PATCH 017/223] bpf, inode: disallow userns mounts Follow-up to commit e27f4a942a0e ("bpf: Use mount_nodev not mount_ns to mount the bpf filesystem"), which removes the FS_USERNS_MOUNT flag. The original idea was to have a per mountns instance instead of a single global fs instance, but that didn't work out and we had to switch to mount_nodev() model. The intent of that middle ground was that we avoid users who don't play nice to create endless instances of bpf fs which are difficult to control and discover from an admin point of view, but at the same time it would have allowed us to be more flexible with regard to namespaces. Therefore, since we now did the switch to mount_nodev() as a fix where individual instances are created, we also need to remove userns mount flag along with it to avoid running into mentioned situation. I don't expect any breakage at this early point in time with removing the flag and we can revisit this later should the requirement for this come up with future users. This and commit e27f4a942a0e have been split to facilitate tracking should any of them run into the unlikely case of causing a regression. Fixes: b2197755b263 ("bpf: add support for persistent maps/progs") Signed-off-by: Daniel Borkmann Acked-by: Hannes Frederic Sowa Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- kernel/bpf/inode.c | 1 - 1 file changed, 1 deletion(-) diff --git a/kernel/bpf/inode.c b/kernel/bpf/inode.c index 04be7021f848..318858edb1cd 100644 --- a/kernel/bpf/inode.c +++ b/kernel/bpf/inode.c @@ -365,7 +365,6 @@ static struct file_system_type bpf_fs_type = { .name = "bpf", .mount = bpf_mount, .kill_sb = kill_litter_super, - .fs_flags = FS_USERNS_MOUNT, }; MODULE_ALIAS_FS("bpf"); From 54b9430f04b0be3beb7f2711152c61e7d39c58e5 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 23 May 2016 13:19:35 +0300 Subject: [PATCH 018/223] qed: signedness bug in qed_dcbx_process_tlv() "priority" needs to be signed for the error handling to work. Fixes: 39651abd2814 ('qed: add support for dcbx.') Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c index cbf58e1f9333..a06d19a698b2 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c @@ -192,9 +192,10 @@ qed_dcbx_process_tlv(struct qed_hwfn *p_hwfn, struct dcbx_app_priority_entry *p_tbl, u32 pri_tc_tbl, int count, bool dcbx_enabled) { - u8 tc, priority, priority_map; + u8 tc, priority_map; enum dcbx_protocol_type type; u16 protocol_id; + int priority; bool enable; int i; From 59fa5860204ffc95128d60cba9f54f9740a42c7d Mon Sep 17 00:00:00 2001 From: Matt Redfearn Date: Tue, 24 May 2016 11:42:30 +0100 Subject: [PATCH 019/223] genirq: Fix missing return value in irq_destroy_ipi() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 7cec18a3906b changed the return type of irq_destroy_ipi to int, but missed adding a value to one return statement. Fix this to silence the resulting compiler warning: kernel/irq/ipi.c In function ‘irq_destroy_ipi’: kernel/irq/ipi.c:128:3: warning: ‘return’ with no value, in function returning non-void [-Wreturn-type] Fixes: 7cec18a3906b "genirq: Add error code reporting to irq_{reserve,destroy}_ipi" Signed-off-by: Matt Redfearn Cc: linux-mips@linux-mips.org Link: http://lkml.kernel.org/r/1464086550-24734-1-git-send-email-matt.redfearn@imgtec.com Signed-off-by: Thomas Gleixner --- kernel/irq/ipi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/irq/ipi.c b/kernel/irq/ipi.c index c42742208e5e..89b49f6773f0 100644 --- a/kernel/irq/ipi.c +++ b/kernel/irq/ipi.c @@ -125,7 +125,7 @@ int irq_destroy_ipi(unsigned int irq, const struct cpumask *dest) domain = data->domain; if (WARN_ON(domain == NULL)) - return; + return -EINVAL; if (!irq_domain_is_ipi(domain)) { pr_warn("Trying to destroy a non IPI domain!\n"); From 1b227e536662eae4b7beee3037edbecdc577495f Mon Sep 17 00:00:00 2001 From: Haishuang Yan Date: Sat, 21 May 2016 18:17:34 +0800 Subject: [PATCH 020/223] ip6_gre: Fix MTU setting for ip6gretap When creat an ip6gretap interface with an unreachable route, the MTU is about 14 bytes larger than what was needed. If the remote address is reachable: ping6 2001:0:130::1 -c 2 PING 2001:0:130::1(2001:0:130::1) 56 data bytes 64 bytes from 2001:0:130::1: icmp_seq=1 ttl=64 time=1.46 ms 64 bytes from 2001:0:130::1: icmp_seq=2 ttl=64 time=81.1 ms Signed-off-by: David S. Miller --- net/ipv6/ip6_gre.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index af503f518278..a6fe3397728c 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -1027,6 +1027,8 @@ static int ip6gre_tunnel_init_common(struct net_device *dev) dev->hard_header_len = LL_MAX_HEADER + t_hlen; dev->mtu = ETH_DATA_LEN - t_hlen; + if (dev->type == ARPHRD_ETHER) + dev->mtu -= ETH_HLEN; if (!(tunnel->parms.flags & IP6_TNL_F_IGN_ENCAP_LIMIT)) dev->mtu -= 8; From 252f3f5a1189a7f6c309d8e4ff1c4c1888a27f13 Mon Sep 17 00:00:00 2001 From: Haishuang Yan Date: Sat, 21 May 2016 18:17:35 +0800 Subject: [PATCH 021/223] ip6_gre: Set flowi6_proto as IPPROTO_GRE in xmit path. In gre6 xmit path, we are sending a GRE packet, so set fl6 proto to IPPROTO_GRE properly. Signed-off-by: Haishuang Yan Signed-off-by: David S. Miller --- net/ipv6/ip6_gre.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index a6fe3397728c..f4ac2842d4d9 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -712,6 +712,7 @@ static void ip6gre_tnl_link_config(struct ip6_tnl *t, int set_mtu) fl6->daddr = p->raddr; fl6->flowi6_oif = p->link; fl6->flowlabel = 0; + fl6->flowi6_proto = IPPROTO_GRE; if (!(p->flags&IP6_TNL_F_USE_ORIG_TCLASS)) fl6->flowlabel |= IPV6_TCLASS_MASK & p->flowinfo; From 3275c0c6c522ab04afa14f80efdac6213c3883d6 Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Mon, 23 May 2016 11:58:28 +1000 Subject: [PATCH 022/223] net/qlge: Avoids recursive EEH error One timer, whose handler keeps reading on MMIO register for EEH core to detect error in time, is started when the PCI device driver is loaded. MMIO register can't be accessed during PE reset in EEH recovery. Otherwise, the unexpected recursive error is triggered. The timer isn't closed that time if the interface isn't brought up. So the unexpected recursive error is seen during EEH recovery when the interface is down. This avoids the unexpected recursive EEH error by closing the timer in qlge_io_error_detected() before EEH PE reset unconditionally. The timer is started unconditionally after EEH PE reset in qlge_io_resume(). Also, the timer should be closed unconditionally when the device is removed from the system permanently in qlge_io_error_detected(). Reported-by: Shriya R. Kulkarni Signed-off-by: Gavin Shan Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlge/qlge_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c index 83d72106471c..fd5d1c93b55b 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c +++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c @@ -4846,7 +4846,6 @@ static void ql_eeh_close(struct net_device *ndev) } /* Disabling the timer */ - del_timer_sync(&qdev->timer); ql_cancel_all_work_sync(qdev); for (i = 0; i < qdev->rss_ring_count; i++) @@ -4873,6 +4872,7 @@ static pci_ers_result_t qlge_io_error_detected(struct pci_dev *pdev, return PCI_ERS_RESULT_CAN_RECOVER; case pci_channel_io_frozen: netif_device_detach(ndev); + del_timer_sync(&qdev->timer); if (netif_running(ndev)) ql_eeh_close(ndev); pci_disable_device(pdev); @@ -4880,6 +4880,7 @@ static pci_ers_result_t qlge_io_error_detected(struct pci_dev *pdev, case pci_channel_io_perm_failure: dev_err(&pdev->dev, "%s: pci_channel_io_perm_failure.\n", __func__); + del_timer_sync(&qdev->timer); ql_eeh_close(ndev); set_bit(QL_EEH_FATAL, &qdev->flags); return PCI_ERS_RESULT_DISCONNECT; From a9efad8b24bd22616f6c749a6c029957dc76542b Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 23 May 2016 14:24:56 -0700 Subject: [PATCH 023/223] net_sched: avoid too many hrtimer_start() calls I found a serious performance bug in packet schedulers using hrtimers. sch_htb and sch_fq are definitely impacted by this problem. We constantly rearm high resolution timers if some packets are throttled in one (or more) class, and other packets are flying through qdisc on another (non throttled) class. hrtimer_start() does not have the mod_timer() trick of doing nothing if expires value does not change : if (timer_pending(timer) && timer->expires == expires) return 1; This issue is particularly visible when multiple cpus can queue/dequeue packets on the same qdisc, as hrtimer code has to lock a remote base. I used following fix : 1) Change htb to use qdisc_watchdog_schedule_ns() instead of open-coding it. 2) Cache watchdog prior expiration. hrtimer might provide this, but I prefer to not rely on some hrtimer internal. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/pkt_sched.h | 1 + net/sched/sch_api.c | 4 ++++ net/sched/sch_htb.c | 13 +++---------- 3 files changed, 8 insertions(+), 10 deletions(-) diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h index 401038d2f9b8..fea53f4d92ca 100644 --- a/include/net/pkt_sched.h +++ b/include/net/pkt_sched.h @@ -61,6 +61,7 @@ psched_tdiff_bounded(psched_time_t tv1, psched_time_t tv2, psched_time_t bound) } struct qdisc_watchdog { + u64 last_expires; struct hrtimer timer; struct Qdisc *qdisc; }; diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index 64f71a2155f3..ddf047df5361 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -607,6 +607,10 @@ void qdisc_watchdog_schedule_ns(struct qdisc_watchdog *wd, u64 expires, bool thr if (throttle) qdisc_throttled(wd->qdisc); + if (wd->last_expires == expires) + return; + + wd->last_expires = expires; hrtimer_start(&wd->timer, ns_to_ktime(expires), HRTIMER_MODE_ABS_PINNED); diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index f6bf5818ed4d..d4b4218af6b1 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -928,17 +928,10 @@ ok: } } qdisc_qstats_overlimit(sch); - if (likely(next_event > q->now)) { - if (!test_bit(__QDISC_STATE_DEACTIVATED, - &qdisc_root_sleeping(q->watchdog.qdisc)->state)) { - ktime_t time = ns_to_ktime(next_event); - qdisc_throttled(q->watchdog.qdisc); - hrtimer_start(&q->watchdog.timer, time, - HRTIMER_MODE_ABS_PINNED); - } - } else { + if (likely(next_event > q->now)) + qdisc_watchdog_schedule_ns(&q->watchdog, next_event, true); + else schedule_work(&q->work); - } fin: return skb; } From 3d3ed18151172c845a11b7c184f2120220ae19fc Mon Sep 17 00:00:00 2001 From: Jamal Hadi Salim Date: Mon, 23 May 2016 21:07:20 -0400 Subject: [PATCH 024/223] net sched actions: policer missing timestamp processing Policer was not dumping or updating timestamps Signed-off-by: Jamal Hadi Salim Acked-by: Cong Wang Signed-off-by: David S. Miller --- include/uapi/linux/pkt_cls.h | 4 +++- net/sched/act_police.c | 11 +++++++++++ 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/include/uapi/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h index eba5914ba5d1..f4297c8a42fe 100644 --- a/include/uapi/linux/pkt_cls.h +++ b/include/uapi/linux/pkt_cls.h @@ -145,6 +145,8 @@ enum { TCA_POLICE_PEAKRATE, TCA_POLICE_AVRATE, TCA_POLICE_RESULT, + TCA_POLICE_TM, + TCA_POLICE_PAD, __TCA_POLICE_MAX #define TCA_POLICE_RESULT TCA_POLICE_RESULT }; @@ -173,7 +175,7 @@ enum { TCA_U32_DIVISOR, TCA_U32_SEL, TCA_U32_POLICE, - TCA_U32_ACT, + TCA_U32_ACT, TCA_U32_INDEV, TCA_U32_PCNT, TCA_U32_MARK, diff --git a/net/sched/act_police.c b/net/sched/act_police.c index 330f14e302e8..b884dae692a1 100644 --- a/net/sched/act_police.c +++ b/net/sched/act_police.c @@ -239,6 +239,8 @@ override: police->tcfp_t_c = ktime_get_ns(); police->tcf_index = parm->index ? parm->index : tcf_hash_new_index(tn); + police->tcf_tm.install = jiffies; + police->tcf_tm.lastuse = jiffies; h = tcf_hash(police->tcf_index, POL_TAB_MASK); spin_lock_bh(&hinfo->lock); hlist_add_head(&police->tcf_head, &hinfo->htab[h]); @@ -268,6 +270,7 @@ static int tcf_act_police(struct sk_buff *skb, const struct tc_action *a, spin_lock(&police->tcf_lock); bstats_update(&police->tcf_bstats, skb); + tcf_lastuse_update(&police->tcf_tm); if (police->tcfp_ewma_rate && police->tcf_rate_est.bps >= police->tcfp_ewma_rate) { @@ -327,6 +330,7 @@ tcf_act_police_dump(struct sk_buff *skb, struct tc_action *a, int bind, int ref) .refcnt = police->tcf_refcnt - ref, .bindcnt = police->tcf_bindcnt - bind, }; + struct tcf_t t; if (police->rate_present) psched_ratecfg_getrate(&opt.rate, &police->rate); @@ -340,6 +344,13 @@ tcf_act_police_dump(struct sk_buff *skb, struct tc_action *a, int bind, int ref) if (police->tcfp_ewma_rate && nla_put_u32(skb, TCA_POLICE_AVRATE, police->tcfp_ewma_rate)) goto nla_put_failure; + + t.install = jiffies_to_clock_t(jiffies - police->tcf_tm.install); + t.lastuse = jiffies_to_clock_t(jiffies - police->tcf_tm.lastuse); + t.expires = jiffies_to_clock_t(police->tcf_tm.expires); + if (nla_put_64bit(skb, TCA_POLICE_TM, sizeof(t), &t, TCA_POLICE_PAD)) + goto nla_put_failure; + return skb->len; nla_put_failure: From ab6a11a7c8ef47f996974dd3c648c2c0b1a36ab1 Mon Sep 17 00:00:00 2001 From: Tom Lendacky Date: Fri, 20 May 2016 17:33:03 -0500 Subject: [PATCH 025/223] crypto: ccp - Fix AES XTS error for request sizes above 4096 The ccp-crypto module for AES XTS support has a bug that can allow requests greater than 4096 bytes in size to be passed to the CCP hardware. The CCP hardware does not support request sizes larger than 4096, resulting in incorrect output. The request should actually be handled by the fallback mechanism instantiated by the ccp-crypto module. Add a check to insure the request size is less than or equal to the maximum supported size and use the fallback mechanism if it is not. Cc: # 3.14.x- Signed-off-by: Tom Lendacky Signed-off-by: Herbert Xu --- drivers/crypto/ccp/ccp-crypto-aes-xts.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/crypto/ccp/ccp-crypto-aes-xts.c b/drivers/crypto/ccp/ccp-crypto-aes-xts.c index 52c7395cb8d8..0d0d4529ee36 100644 --- a/drivers/crypto/ccp/ccp-crypto-aes-xts.c +++ b/drivers/crypto/ccp/ccp-crypto-aes-xts.c @@ -122,6 +122,7 @@ static int ccp_aes_xts_crypt(struct ablkcipher_request *req, struct ccp_ctx *ctx = crypto_tfm_ctx(req->base.tfm); struct ccp_aes_req_ctx *rctx = ablkcipher_request_ctx(req); unsigned int unit; + u32 unit_size; int ret; if (!ctx->u.aes.key_len) @@ -133,11 +134,17 @@ static int ccp_aes_xts_crypt(struct ablkcipher_request *req, if (!req->info) return -EINVAL; - for (unit = 0; unit < ARRAY_SIZE(unit_size_map); unit++) - if (!(req->nbytes & (unit_size_map[unit].size - 1))) - break; + unit_size = CCP_XTS_AES_UNIT_SIZE__LAST; + if (req->nbytes <= unit_size_map[0].size) { + for (unit = 0; unit < ARRAY_SIZE(unit_size_map); unit++) { + if (!(req->nbytes & (unit_size_map[unit].size - 1))) { + unit_size = unit_size_map[unit].value; + break; + } + } + } - if ((unit_size_map[unit].value == CCP_XTS_AES_UNIT_SIZE__LAST) || + if ((unit_size == CCP_XTS_AES_UNIT_SIZE__LAST) || (ctx->u.aes.key_len != AES_KEYSIZE_128)) { /* Use the fallback to process the request for any * unsupported unit sizes or key sizes @@ -158,7 +165,7 @@ static int ccp_aes_xts_crypt(struct ablkcipher_request *req, rctx->cmd.engine = CCP_ENGINE_XTS_AES_128; rctx->cmd.u.xts.action = (encrypt) ? CCP_AES_ACTION_ENCRYPT : CCP_AES_ACTION_DECRYPT; - rctx->cmd.u.xts.unit_size = unit_size_map[unit].value; + rctx->cmd.u.xts.unit_size = unit_size; rctx->cmd.u.xts.key = &ctx->u.aes.key_sg; rctx->cmd.u.xts.key_len = ctx->u.aes.key_len; rctx->cmd.u.xts.iv = &rctx->iv_sg; From 3851112e4737cd52aaeda0ce8d084be9ee128106 Mon Sep 17 00:00:00 2001 From: Vidya Sagar Ravipati Date: Sun, 22 May 2016 23:59:00 -0700 Subject: [PATCH 026/223] ethtool: add support for 25G/50G/100G speed modes This patch enhances ethtool link mode bitmap to include 25G/50G/100G speed along with interface modes Signed-off-by: Vidya Sagar Ravipati Signed-off-by: David S. Miller --- include/uapi/linux/ethtool.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 9222db8ccccc..5f030b46cff4 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -1353,6 +1353,15 @@ enum ethtool_link_mode_bit_indices { ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT = 28, ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT = 29, ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT = 30, + ETHTOOL_LINK_MODE_25000baseCR_Full_BIT = 31, + ETHTOOL_LINK_MODE_25000baseKR_Full_BIT = 32, + ETHTOOL_LINK_MODE_25000baseSR_Full_BIT = 33, + ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT = 34, + ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT = 35, + ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT = 36, + ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT = 37, + ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT = 38, + ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT = 39, /* Last allowed bit for __ETHTOOL_LINK_MODE_LEGACY_MASK is bit * 31. Please do NOT define any SUPPORTED_* or ADVERTISED_* @@ -1361,7 +1370,7 @@ enum ethtool_link_mode_bit_indices { */ __ETHTOOL_LINK_MODE_LAST - = ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT, + = ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT, }; #define __ETHTOOL_LINK_MODE_LEGACY_MASK(base_name) \ From ec7c7f5cafdaeea509ad4e7e6f71c2312062c4c6 Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Tue, 24 May 2016 05:25:23 -0400 Subject: [PATCH 027/223] qed: Reset the enable flag for eth protocol. This patch fixes the coding error in determining the enable flag for the application/protocol. The enable flag should be set for all protocols but the eth. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c index a06d19a698b2..21ec1c2df2c7 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c @@ -222,7 +222,7 @@ qed_dcbx_process_tlv(struct qed_hwfn *p_hwfn, * indication, but we only got here if there was an * app tlv for the protocol, so dcbx must be enabled. */ - enable = !!(type == DCBX_PROTOCOL_ETH); + enable = !(type == DCBX_PROTOCOL_ETH); qed_dcbx_update_app_info(p_data, p_hwfn, enable, true, priority, tc, type); From 297f7d2cce6a156c174334ee452f2f7a7ba405ca Mon Sep 17 00:00:00 2001 From: Baozeng Ding Date: Tue, 24 May 2016 22:33:24 +0800 Subject: [PATCH 028/223] tipc: fix potential null pointer dereferences in some compat functions Before calling the nla_parse_nested function, make sure the pointer to the attribute is not null. This patch fixes several potential null pointer dereference vulnerabilities in the tipc netlink functions. Signed-off-by: Baozeng Ding Signed-off-by: David S. Miller --- net/tipc/netlink_compat.c | 111 +++++++++++++++++++++++++++++++------- 1 file changed, 93 insertions(+), 18 deletions(-) diff --git a/net/tipc/netlink_compat.c b/net/tipc/netlink_compat.c index 4dfc5c14f8c3..f795b1dd0ccd 100644 --- a/net/tipc/netlink_compat.c +++ b/net/tipc/netlink_compat.c @@ -346,9 +346,15 @@ static int tipc_nl_compat_bearer_dump(struct tipc_nl_compat_msg *msg, struct nlattr **attrs) { struct nlattr *bearer[TIPC_NLA_BEARER_MAX + 1]; + int err; - nla_parse_nested(bearer, TIPC_NLA_BEARER_MAX, attrs[TIPC_NLA_BEARER], - NULL); + if (!attrs[TIPC_NLA_BEARER]) + return -EINVAL; + + err = nla_parse_nested(bearer, TIPC_NLA_BEARER_MAX, + attrs[TIPC_NLA_BEARER], NULL); + if (err) + return err; return tipc_add_tlv(msg->rep, TIPC_TLV_BEARER_NAME, nla_data(bearer[TIPC_NLA_BEARER_NAME]), @@ -460,14 +466,31 @@ static int tipc_nl_compat_link_stat_dump(struct tipc_nl_compat_msg *msg, struct nlattr *link[TIPC_NLA_LINK_MAX + 1]; struct nlattr *prop[TIPC_NLA_PROP_MAX + 1]; struct nlattr *stats[TIPC_NLA_STATS_MAX + 1]; + int err; - nla_parse_nested(link, TIPC_NLA_LINK_MAX, attrs[TIPC_NLA_LINK], NULL); + if (!attrs[TIPC_NLA_LINK]) + return -EINVAL; - nla_parse_nested(prop, TIPC_NLA_PROP_MAX, link[TIPC_NLA_LINK_PROP], - NULL); + err = nla_parse_nested(link, TIPC_NLA_LINK_MAX, attrs[TIPC_NLA_LINK], + NULL); + if (err) + return err; - nla_parse_nested(stats, TIPC_NLA_STATS_MAX, link[TIPC_NLA_LINK_STATS], - NULL); + if (!link[TIPC_NLA_LINK_PROP]) + return -EINVAL; + + err = nla_parse_nested(prop, TIPC_NLA_PROP_MAX, + link[TIPC_NLA_LINK_PROP], NULL); + if (err) + return err; + + if (!link[TIPC_NLA_LINK_STATS]) + return -EINVAL; + + err = nla_parse_nested(stats, TIPC_NLA_STATS_MAX, + link[TIPC_NLA_LINK_STATS], NULL); + if (err) + return err; name = (char *)TLV_DATA(msg->req); if (strcmp(name, nla_data(link[TIPC_NLA_LINK_NAME])) != 0) @@ -569,8 +592,15 @@ static int tipc_nl_compat_link_dump(struct tipc_nl_compat_msg *msg, { struct nlattr *link[TIPC_NLA_LINK_MAX + 1]; struct tipc_link_info link_info; + int err; - nla_parse_nested(link, TIPC_NLA_LINK_MAX, attrs[TIPC_NLA_LINK], NULL); + if (!attrs[TIPC_NLA_LINK]) + return -EINVAL; + + err = nla_parse_nested(link, TIPC_NLA_LINK_MAX, attrs[TIPC_NLA_LINK], + NULL); + if (err) + return err; link_info.dest = nla_get_flag(link[TIPC_NLA_LINK_DEST]); link_info.up = htonl(nla_get_flag(link[TIPC_NLA_LINK_UP])); @@ -758,12 +788,23 @@ static int tipc_nl_compat_name_table_dump(struct tipc_nl_compat_msg *msg, u32 node, depth, type, lowbound, upbound; static const char * const scope_str[] = {"", " zone", " cluster", " node"}; + int err; - nla_parse_nested(nt, TIPC_NLA_NAME_TABLE_MAX, - attrs[TIPC_NLA_NAME_TABLE], NULL); + if (!attrs[TIPC_NLA_NAME_TABLE]) + return -EINVAL; - nla_parse_nested(publ, TIPC_NLA_PUBL_MAX, nt[TIPC_NLA_NAME_TABLE_PUBL], - NULL); + err = nla_parse_nested(nt, TIPC_NLA_NAME_TABLE_MAX, + attrs[TIPC_NLA_NAME_TABLE], NULL); + if (err) + return err; + + if (!nt[TIPC_NLA_NAME_TABLE_PUBL]) + return -EINVAL; + + err = nla_parse_nested(publ, TIPC_NLA_PUBL_MAX, + nt[TIPC_NLA_NAME_TABLE_PUBL], NULL); + if (err) + return err; ntq = (struct tipc_name_table_query *)TLV_DATA(msg->req); @@ -815,8 +856,15 @@ static int __tipc_nl_compat_publ_dump(struct tipc_nl_compat_msg *msg, { u32 type, lower, upper; struct nlattr *publ[TIPC_NLA_PUBL_MAX + 1]; + int err; - nla_parse_nested(publ, TIPC_NLA_PUBL_MAX, attrs[TIPC_NLA_PUBL], NULL); + if (!attrs[TIPC_NLA_PUBL]) + return -EINVAL; + + err = nla_parse_nested(publ, TIPC_NLA_PUBL_MAX, attrs[TIPC_NLA_PUBL], + NULL); + if (err) + return err; type = nla_get_u32(publ[TIPC_NLA_PUBL_TYPE]); lower = nla_get_u32(publ[TIPC_NLA_PUBL_LOWER]); @@ -876,7 +924,13 @@ static int tipc_nl_compat_sk_dump(struct tipc_nl_compat_msg *msg, u32 sock_ref; struct nlattr *sock[TIPC_NLA_SOCK_MAX + 1]; - nla_parse_nested(sock, TIPC_NLA_SOCK_MAX, attrs[TIPC_NLA_SOCK], NULL); + if (!attrs[TIPC_NLA_SOCK]) + return -EINVAL; + + err = nla_parse_nested(sock, TIPC_NLA_SOCK_MAX, attrs[TIPC_NLA_SOCK], + NULL); + if (err) + return err; sock_ref = nla_get_u32(sock[TIPC_NLA_SOCK_REF]); tipc_tlv_sprintf(msg->rep, "%u:", sock_ref); @@ -917,9 +971,15 @@ static int tipc_nl_compat_media_dump(struct tipc_nl_compat_msg *msg, struct nlattr **attrs) { struct nlattr *media[TIPC_NLA_MEDIA_MAX + 1]; + int err; - nla_parse_nested(media, TIPC_NLA_MEDIA_MAX, attrs[TIPC_NLA_MEDIA], - NULL); + if (!attrs[TIPC_NLA_MEDIA]) + return -EINVAL; + + err = nla_parse_nested(media, TIPC_NLA_MEDIA_MAX, attrs[TIPC_NLA_MEDIA], + NULL); + if (err) + return err; return tipc_add_tlv(msg->rep, TIPC_TLV_MEDIA_NAME, nla_data(media[TIPC_NLA_MEDIA_NAME]), @@ -931,8 +991,15 @@ static int tipc_nl_compat_node_dump(struct tipc_nl_compat_msg *msg, { struct tipc_node_info node_info; struct nlattr *node[TIPC_NLA_NODE_MAX + 1]; + int err; - nla_parse_nested(node, TIPC_NLA_NODE_MAX, attrs[TIPC_NLA_NODE], NULL); + if (!attrs[TIPC_NLA_NODE]) + return -EINVAL; + + err = nla_parse_nested(node, TIPC_NLA_NODE_MAX, attrs[TIPC_NLA_NODE], + NULL); + if (err) + return err; node_info.addr = htonl(nla_get_u32(node[TIPC_NLA_NODE_ADDR])); node_info.up = htonl(nla_get_flag(node[TIPC_NLA_NODE_UP])); @@ -971,8 +1038,16 @@ static int tipc_nl_compat_net_dump(struct tipc_nl_compat_msg *msg, { __be32 id; struct nlattr *net[TIPC_NLA_NET_MAX + 1]; + int err; + + if (!attrs[TIPC_NLA_NET]) + return -EINVAL; + + err = nla_parse_nested(net, TIPC_NLA_NET_MAX, attrs[TIPC_NLA_NET], + NULL); + if (err) + return err; - nla_parse_nested(net, TIPC_NLA_NET_MAX, attrs[TIPC_NLA_NET], NULL); id = htonl(nla_get_u32(net[TIPC_NLA_NET_ID])); return tipc_add_tlv(msg->rep, TIPC_TLV_UNSIGNED, &id, sizeof(id)); From 91c45e38b9478ff507e05f10151d64cd0d1aad7b Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Tue, 24 May 2016 18:03:25 +0200 Subject: [PATCH 029/223] net: mvneta: Fix lacking spinlock initialization The spinlock used by the hwbm functions must be initialized by the network driver. This commit fixes this lack and the following erros when lockdep is enabled: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0xb4/0xe0) [] (dump_stack) from [] (__lock_acquire+0x1f58/0x2060) [] (__lock_acquire) from [] (lock_acquire+0xa4/0xd0) [] (lock_acquire) from [] (_raw_spin_lock_irqsave+0x54/0x68) [] (_raw_spin_lock_irqsave) from [] (hwbm_pool_add+0x1c/0xdc) [] (hwbm_pool_add) from [] (mvneta_bm_pool_use+0x338/0x490) [] (mvneta_bm_pool_use) from [] (mvneta_probe+0x654/0x1284) [] (mvneta_probe) from [] (platform_drv_probe+0x4c/0xb0) [] (platform_drv_probe) from [] (driver_probe_device+0x214/0x2c0) [] (driver_probe_device) from [] (__driver_attach+0xc0/0xc4) [] (__driver_attach) from [] (bus_for_each_dev+0x68/0x9c) [] (bus_for_each_dev) from [] (bus_add_driver+0x1a0/0x218) [] (bus_add_driver) from [] (driver_register+0x78/0xf8) [] (driver_register) from [] (do_one_initcall+0x90/0x1dc) [] (do_one_initcall) from [] (kernel_init_freeable+0x15c/0x1fc) [] (kernel_init_freeable) from [] (kernel_init+0x8/0x114) [] (kernel_init) from [] (ret_from_fork+0x14/0x24) Fixes: baa11ebc0c76 ("net: mvneta: Use the new hwbm framework") Reported-by: Russell King Cc: Signed-off-by: Gregory CLEMENT Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta_bm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/marvell/mvneta_bm.c b/drivers/net/ethernet/marvell/mvneta_bm.c index 01fccec632ec..466939f8f0cf 100644 --- a/drivers/net/ethernet/marvell/mvneta_bm.c +++ b/drivers/net/ethernet/marvell/mvneta_bm.c @@ -189,6 +189,7 @@ struct mvneta_bm_pool *mvneta_bm_pool_use(struct mvneta_bm *priv, u8 pool_id, SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); hwbm_pool->construct = mvneta_bm_construct; hwbm_pool->priv = new_pool; + spin_lock_init(&hwbm_pool->lock); /* Create new pool */ err = mvneta_bm_pool_create(priv, new_pool); From b388fc7405e901c7d6f7817d05193c054e761815 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Tue, 24 May 2016 18:03:26 +0200 Subject: [PATCH 030/223] net: hwbm: Fix unbalanced spinlock in error case When hwbm_pool_add exited in error the spinlock was not released. This patch fixes this issue. Fixes: 8cb2d8bf57e6 ("net: add a hardware buffer management helper API") Reported-by: Jean-Jacques Hiblot Cc: Signed-off-by: Gregory CLEMENT Signed-off-by: David S. Miller --- net/core/hwbm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/core/hwbm.c b/net/core/hwbm.c index 941c28486896..2cab489ae62e 100644 --- a/net/core/hwbm.c +++ b/net/core/hwbm.c @@ -55,18 +55,21 @@ int hwbm_pool_add(struct hwbm_pool *bm_pool, unsigned int buf_num, gfp_t gfp) spin_lock_irqsave(&bm_pool->lock, flags); if (bm_pool->buf_num == bm_pool->size) { pr_warn("pool already filled\n"); + spin_unlock_irqrestore(&bm_pool->lock, flags); return bm_pool->buf_num; } if (buf_num + bm_pool->buf_num > bm_pool->size) { pr_warn("cannot allocate %d buffers for pool\n", buf_num); + spin_unlock_irqrestore(&bm_pool->lock, flags); return 0; } if ((buf_num + bm_pool->buf_num) < bm_pool->buf_num) { pr_warn("Adding %d buffers to the %d current buffers will overflow\n", buf_num, bm_pool->buf_num); + spin_unlock_irqrestore(&bm_pool->lock, flags); return 0; } From c0795bf64cba4d1b796fdc5b74b33772841ed1bb Mon Sep 17 00:00:00 2001 From: Edward Cree Date: Tue, 24 May 2016 18:53:36 +0100 Subject: [PATCH 031/223] sfc: on MC reset, clear PIO buffer linkage in TXQs Otherwise, if we fail to allocate new PIO buffers, our TXQs will try to use the old ones, which aren't there any more. Fixes: 183233bec810 "sfc: Allocate and link PIO buffers; map them with write-combining" Signed-off-by: Edward Cree Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/ef10.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c index 1681084cc96f..1f309127457d 100644 --- a/drivers/net/ethernet/sfc/ef10.c +++ b/drivers/net/ethernet/sfc/ef10.c @@ -619,6 +619,17 @@ fail: return rc; } +static void efx_ef10_forget_old_piobufs(struct efx_nic *efx) +{ + struct efx_channel *channel; + struct efx_tx_queue *tx_queue; + + /* All our existing PIO buffers went away */ + efx_for_each_channel(channel, efx) + efx_for_each_channel_tx_queue(tx_queue, channel) + tx_queue->piobuf = NULL; +} + #else /* !EFX_USE_PIO */ static int efx_ef10_alloc_piobufs(struct efx_nic *efx, unsigned int n) @@ -635,6 +646,10 @@ static void efx_ef10_free_piobufs(struct efx_nic *efx) { } +static void efx_ef10_forget_old_piobufs(struct efx_nic *efx) +{ +} + #endif /* EFX_USE_PIO */ static void efx_ef10_remove(struct efx_nic *efx) @@ -1018,6 +1033,7 @@ static void efx_ef10_reset_mc_allocations(struct efx_nic *efx) nic_data->must_realloc_vis = true; nic_data->must_restore_filters = true; nic_data->must_restore_piobufs = true; + efx_ef10_forget_old_piobufs(efx); nic_data->rx_rss_context = EFX_EF10_RSS_CONTEXT_INVALID; /* Driver-created vswitches and vports must be re-created */ From 75c0bbd0e23a295faf80aa68bf5ab2b5fac709b2 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 24 May 2016 21:26:39 -0700 Subject: [PATCH 032/223] Documentation: networking: dsa: Remove poll_link description This function has been removed in 4baee937b8d5 ("net: dsa: remove DSA link polling") in favor of using the PHYLIB polling mechanism. Reviewed-by: Vivien Didelot Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- Documentation/networking/dsa/dsa.txt | 5 ----- 1 file changed, 5 deletions(-) diff --git a/Documentation/networking/dsa/dsa.txt b/Documentation/networking/dsa/dsa.txt index 631b0f7ae16f..8303eb8ced79 100644 --- a/Documentation/networking/dsa/dsa.txt +++ b/Documentation/networking/dsa/dsa.txt @@ -416,11 +416,6 @@ PHY devices and link management to the switch port MDIO registers. If unavailable return a negative error code. -- poll_link: Function invoked by DSA to query the link state of the switch - builtin Ethernet PHYs, per port. This function is responsible for calling - netif_carrier_{on,off} when appropriate, and can be used to poll all ports in a - single call. Executes from workqueue context. - - adjust_link: Function invoked by the PHY library when a slave network device is attached to a PHY device. This function is responsible for appropriately configuring the switch port link parameters: speed, duplex, pause based on From 7013d8e1d0a07b74dc6f81b470654290b769e9bb Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 24 May 2016 21:26:40 -0700 Subject: [PATCH 033/223] Documentation: networking: dsa: Remove priv_size description We no longer have a priv_size structure member since 5feebd0a8a79 ("net: dsa: Remove allocation of driver private memory") Reviewed-by: Vivien Didelot Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- Documentation/networking/dsa/dsa.txt | 2 -- 1 file changed, 2 deletions(-) diff --git a/Documentation/networking/dsa/dsa.txt b/Documentation/networking/dsa/dsa.txt index 8303eb8ced79..411b57fd73aa 100644 --- a/Documentation/networking/dsa/dsa.txt +++ b/Documentation/networking/dsa/dsa.txt @@ -369,8 +369,6 @@ does not allocate any driver private context space. Switch configuration -------------------- -- priv_size: additional size needed by the switch driver for its private context - - tag_protocol: this is to indicate what kind of tagging protocol is supported, should be a valid value from the dsa_tag_protocol enum From f05e2db1996d7a640c76481ba5ea3d7a295a8f48 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 24 May 2016 21:26:41 -0700 Subject: [PATCH 034/223] Documentation: networking: dsa: Describe port_vlan_filtering Described what the port_vlan_filtering function is supposed to accomplish. Fixes: fb2dabad69f0 ("net: dsa: support VLAN filtering switchdev attr") Signed-off-by: Florian Fainelli Reviewed-by: Vivien Didelot Signed-off-by: David S. Miller --- Documentation/networking/dsa/dsa.txt | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/Documentation/networking/dsa/dsa.txt b/Documentation/networking/dsa/dsa.txt index 411b57fd73aa..9d05ed7f7da5 100644 --- a/Documentation/networking/dsa/dsa.txt +++ b/Documentation/networking/dsa/dsa.txt @@ -535,6 +535,16 @@ Bridge layer Bridge VLAN filtering --------------------- +- port_vlan_filtering: bridge layer function invoked when the bridge gets + configured for turning on or off VLAN filtering. If nothing specific needs to + be done at the hardware level, this callback does not need to be implemented. + When VLAN filtering is turned on, the hardware must be programmed with + rejecting 802.1Q frames which have VLAN IDs outside of the programmed allowed + VLAN ID map/rules. If there is no PVID programmed into the switch port, + untagged frames must be rejected as well. When turned off the switch must + accept any 802.1Q frames irrespective of their VLAN ID, and untagged frames are + allowed. + - port_vlan_prepare: bridge layer function invoked when the bridge prepares the configuration of a VLAN on the given port. If the operation is not supported by the hardware, this function should return -EOPNOTSUPP to inform the bridge From 9ea46abe22550e3366ff7cee2f8391b35b12f730 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 25 May 2016 12:51:20 -0700 Subject: [PATCH 035/223] sparc64: Take ctx_alloc_lock properly in hugetlb_setup(). On cheetahplus chips we take the ctx_alloc_lock in order to modify the TLB lookup parameters for the indexed TLBs, which are stored in the context register. This is called with interrupts disabled, however ctx_alloc_lock is an IRQ safe lock, therefore we must take acquire/release it properly with spin_{lock,unlock}_irq(). Reported-by: Meelis Roos Tested-by: Meelis Roos Signed-off-by: David S. Miller --- arch/sparc/mm/init_64.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index 652683cb4b4b..14bb0d5ed3c6 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -2824,9 +2824,10 @@ void hugetlb_setup(struct pt_regs *regs) * the Data-TLB for huge pages. */ if (tlb_type == cheetah_plus) { + bool need_context_reload = false; unsigned long ctx; - spin_lock(&ctx_alloc_lock); + spin_lock_irq(&ctx_alloc_lock); ctx = mm->context.sparc64_ctx_val; ctx &= ~CTX_PGSZ_MASK; ctx |= CTX_PGSZ_BASE << CTX_PGSZ0_SHIFT; @@ -2845,9 +2846,12 @@ void hugetlb_setup(struct pt_regs *regs) * also executing in this address space. */ mm->context.sparc64_ctx_val = ctx; - on_each_cpu(context_reload, mm, 0); + need_context_reload = true; } - spin_unlock(&ctx_alloc_lock); + spin_unlock_irq(&ctx_alloc_lock); + + if (need_context_reload) + on_each_cpu(context_reload, mm, 0); } } #endif From f6988cb63a4e698d8a62a1d085d263d1fcc351ea Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Wed, 25 May 2016 21:21:52 +0200 Subject: [PATCH 036/223] team: don't call netdev_change_features under team->lock The team_device_event() notifier calls team_compute_features() to fix vlan_features under team->lock to protect team->port_list. The problem is that subsequent __team_compute_features() calls netdev_change_features() to propagate vlan_features to upper vlan devices while team->lock is still taken. This can lead to deadlock when NETIF_F_LRO is modified on lower devices or team device itself. Example: The team0 as active backup with eth0 and eth1 NICs. Both eth0 & eth1 are LRO capable and LRO is enabled. Thus LRO is also enabled on team0. The command 'ethtool -K team0 lro off' now hangs due to this deadlock: dev_ethtool() -> ethtool_set_features() -> __netdev_update_features(team) -> netdev_sync_lower_features() -> netdev_update_features(lower_1) -> __netdev_update_features(lower_1) -> netdev_features_change(lower_1) -> call_netdevice_notifiers(...) -> team_device_event(lower_1) -> team_compute_features(team) [TAKES team->lock] -> netdev_change_features(team) -> __netdev_update_features(team) -> netdev_sync_lower_features() -> netdev_update_features(lower_2) -> __netdev_update_features(lower_2) -> netdev_features_change(lower_2) -> call_netdevice_notifiers(...) -> team_device_event(lower_2) -> team_compute_features(team) [DEADLOCK] The bug is present in team from the beginning but it appeared after the commit fd867d5 (net/core: generic support for disabling netdev features down stack) that adds synchronization of features with lower devices. Fixes: fd867d5 (net/core: generic support for disabling netdev features down stack) Cc: Jiri Pirko Signed-off-by: Ivan Vecera Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/team/team.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index a0f64cba86ba..2ace126533cd 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -990,7 +990,7 @@ static void team_port_disable(struct team *team, #define TEAM_ENC_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \ NETIF_F_RXCSUM | NETIF_F_ALL_TSO) -static void __team_compute_features(struct team *team) +static void ___team_compute_features(struct team *team) { struct team_port *port; u32 vlan_features = TEAM_VLAN_FEATURES & NETIF_F_ALL_FOR_ALL; @@ -1021,15 +1021,20 @@ static void __team_compute_features(struct team *team) team->dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; if (dst_release_flag == (IFF_XMIT_DST_RELEASE | IFF_XMIT_DST_RELEASE_PERM)) team->dev->priv_flags |= IFF_XMIT_DST_RELEASE; +} +static void __team_compute_features(struct team *team) +{ + ___team_compute_features(team); netdev_change_features(team->dev); } static void team_compute_features(struct team *team) { mutex_lock(&team->lock); - __team_compute_features(team); + ___team_compute_features(team); mutex_unlock(&team->lock); + netdev_change_features(team->dev); } static int team_port_enter(struct team *team, struct team_port *port) From 26c5f03b2ae8018418ceb25b2e6a48560e8c2f5b Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Wed, 25 May 2016 14:49:54 +0800 Subject: [PATCH 037/223] net: alx: use custom skb allocator This patch follows Eric Dumazet's commit 7b70176421 for Atheros atl1c driver to fix one exactly same bug in alx driver, that the network link will be lost in 1-5 minutes after the device is up. My laptop Lenovo Y580 with Atheros AR8161 ethernet device hit the same problem with kernel 4.4, and it will be cured by Jarod Wilson's commit c406700c for alx driver which get merged in 4.5. But there are still some alx devices can't function well even with Jarod's patch, while this patch could make them work fine. More details on https://bugzilla.kernel.org/show_bug.cgi?id=70761 The debug shows the issue is very likely to be related with the RX DMA address, specifically 0x...f80, if RX buffer get 0x...f80 several times, their will be RX overflow error and device will stop working. For kernel 4.5.0 with Jarod's patch which works fine with my AR8161/Lennov Y580, if I made some change to the __netdev_alloc_skb --> __alloc_page_frag() to make the allocated buffer can get an address with 0x...f80, then the same error happens. If I make it to 0x...f40 or 0x....fc0, everything will be still fine. So I tend to believe that the 0x..f80 address cause the silicon to behave abnormally. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70761 Cc: Eric Dumazet Cc: Johannes Berg Cc: Jarod Wilson Signed-off-by: Feng Tang Tested-by: Ole Lukoie Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/alx/alx.h | 4 +++ drivers/net/ethernet/atheros/alx/main.c | 48 ++++++++++++++++++++++++- 2 files changed, 51 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/atheros/alx/alx.h b/drivers/net/ethernet/atheros/alx/alx.h index 8fc93c5f6abc..d02c4240b7df 100644 --- a/drivers/net/ethernet/atheros/alx/alx.h +++ b/drivers/net/ethernet/atheros/alx/alx.h @@ -96,6 +96,10 @@ struct alx_priv { unsigned int rx_ringsz; unsigned int rxbuf_size; + struct page *rx_page; + unsigned int rx_page_offset; + unsigned int rx_frag_size; + struct napi_struct napi; struct alx_tx_queue txq; struct alx_rx_queue rxq; diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c index 9fe8b5e310d1..c98acdc0d14f 100644 --- a/drivers/net/ethernet/atheros/alx/main.c +++ b/drivers/net/ethernet/atheros/alx/main.c @@ -70,6 +70,35 @@ static void alx_free_txbuf(struct alx_priv *alx, int entry) } } +static struct sk_buff *alx_alloc_skb(struct alx_priv *alx, gfp_t gfp) +{ + struct sk_buff *skb; + struct page *page; + + if (alx->rx_frag_size > PAGE_SIZE) + return __netdev_alloc_skb(alx->dev, alx->rxbuf_size, gfp); + + page = alx->rx_page; + if (!page) { + alx->rx_page = page = alloc_page(gfp); + if (unlikely(!page)) + return NULL; + alx->rx_page_offset = 0; + } + + skb = build_skb(page_address(page) + alx->rx_page_offset, + alx->rx_frag_size); + if (likely(skb)) { + alx->rx_page_offset += alx->rx_frag_size; + if (alx->rx_page_offset >= PAGE_SIZE) + alx->rx_page = NULL; + else + get_page(page); + } + return skb; +} + + static int alx_refill_rx_ring(struct alx_priv *alx, gfp_t gfp) { struct alx_rx_queue *rxq = &alx->rxq; @@ -86,7 +115,7 @@ static int alx_refill_rx_ring(struct alx_priv *alx, gfp_t gfp) while (!cur_buf->skb && next != rxq->read_idx) { struct alx_rfd *rfd = &rxq->rfd[cur]; - skb = __netdev_alloc_skb(alx->dev, alx->rxbuf_size, gfp); + skb = alx_alloc_skb(alx, gfp); if (!skb) break; dma = dma_map_single(&alx->hw.pdev->dev, @@ -124,6 +153,7 @@ static int alx_refill_rx_ring(struct alx_priv *alx, gfp_t gfp) alx_write_mem16(&alx->hw, ALX_RFD_PIDX, cur); } + return count; } @@ -592,6 +622,11 @@ static void alx_free_rings(struct alx_priv *alx) kfree(alx->txq.bufs); kfree(alx->rxq.bufs); + if (alx->rx_page) { + put_page(alx->rx_page); + alx->rx_page = NULL; + } + dma_free_coherent(&alx->hw.pdev->dev, alx->descmem.size, alx->descmem.virt, @@ -646,6 +681,7 @@ static int alx_request_irq(struct alx_priv *alx) alx->dev->name, alx); if (!err) goto out; + /* fall back to legacy interrupt */ pci_disable_msi(alx->hw.pdev); } @@ -689,6 +725,7 @@ static int alx_init_sw(struct alx_priv *alx) struct pci_dev *pdev = alx->hw.pdev; struct alx_hw *hw = &alx->hw; int err; + unsigned int head_size; err = alx_identify_hw(alx); if (err) { @@ -704,7 +741,12 @@ static int alx_init_sw(struct alx_priv *alx) hw->smb_timer = 400; hw->mtu = alx->dev->mtu; + alx->rxbuf_size = ALX_MAX_FRAME_LEN(hw->mtu); + head_size = SKB_DATA_ALIGN(alx->rxbuf_size + NET_SKB_PAD) + + SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); + alx->rx_frag_size = roundup_pow_of_two(head_size); + alx->tx_ringsz = 256; alx->rx_ringsz = 512; hw->imt = 200; @@ -806,6 +848,7 @@ static int alx_change_mtu(struct net_device *netdev, int mtu) { struct alx_priv *alx = netdev_priv(netdev); int max_frame = ALX_MAX_FRAME_LEN(mtu); + unsigned int head_size; if ((max_frame < ALX_MIN_FRAME_SIZE) || (max_frame > ALX_MAX_FRAME_SIZE)) @@ -817,6 +860,9 @@ static int alx_change_mtu(struct net_device *netdev, int mtu) netdev->mtu = mtu; alx->hw.mtu = mtu; alx->rxbuf_size = max(max_frame, ALX_DEF_RXBUF_SIZE); + head_size = SKB_DATA_ALIGN(alx->rxbuf_size + NET_SKB_PAD) + + SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); + alx->rx_frag_size = roundup_pow_of_two(head_size); netdev_update_features(netdev); if (netif_running(netdev)) alx_reinit(alx); From 643d60bf575daaba93c1ac0d0e1c4b1d4ded1f75 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 26 May 2016 00:40:23 +0200 Subject: [PATCH 038/223] net: stmmac: Fix incorrect memcpy source memory The memcpy() currently copies mdio_bus_data into new_bus->irq, which makes no sense, since the mdio_bus_data structure contains more than just irqs. The code was likely supposed to copy mdio_bus_data->irqs into the new_bus->irq instead, so fix this. Fixes: e7f4dc3536a4 ("mdio: Move allocation of interrupts into core") Signed-off-by: Marek Vasut Cc: David S. Miller Cc: Giuseppe Cavallaro Cc: Alexandre Torgue Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c index 3f83c369f56c..ec295851812b 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c @@ -297,7 +297,7 @@ int stmmac_mdio_register(struct net_device *ndev) return -ENOMEM; if (mdio_bus_data->irqs) - memcpy(new_bus->irq, mdio_bus_data, sizeof(new_bus->irq)); + memcpy(new_bus->irq, mdio_bus_data->irqs, sizeof(new_bus->irq)); #ifdef CONFIG_OF if (priv->device->of_node) From 3424d9be8f09649e6290d066c5c3cccff1c0ce77 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 26 May 2016 00:40:05 +0200 Subject: [PATCH 039/223] net: arc: trivial: Replace comma with a semicolon Fix a typo in the driver, replace comma with a semicolon at the end of statement. While using comma is a legal C here and probably does not even generate compiler warning, it was unlikely the intention. Signed-off-by: Marek Vasut Cc: David S. Miller Cc: Caesar Wang Cc: Heiko Stuebner Signed-off-by: David S. Miller --- drivers/net/ethernet/arc/emac_mdio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/arc/emac_mdio.c b/drivers/net/ethernet/arc/emac_mdio.c index 16419f550eff..058460bdd5a6 100644 --- a/drivers/net/ethernet/arc/emac_mdio.c +++ b/drivers/net/ethernet/arc/emac_mdio.c @@ -141,7 +141,7 @@ int arc_mdio_probe(struct arc_emac_priv *priv) priv->bus = bus; bus->priv = priv; bus->parent = priv->dev; - bus->name = "Synopsys MII Bus", + bus->name = "Synopsys MII Bus"; bus->read = &arc_mdio_read; bus->write = &arc_mdio_write; bus->reset = &arc_mdio_reset; From bed187b540167eb10320f6a2177604421650772e Mon Sep 17 00:00:00 2001 From: Xin Long Date: Thu, 26 May 2016 03:09:23 +0800 Subject: [PATCH 040/223] sctp: fix double EPs display in sctp_diag We have this situation: that EP hash table, contains only the EPs that are listening, while the transports one, has the opposite. We have to traverse both to dump all. But when we traverse the transports one we will also get EPs that are in the EP hash if they are listening. In this case, the EP is dumped twice. We will fix it by checking if the endpoint that is in the endpoint hash table contains any ep->asoc in there, as it means we will also find it via transport hash, and thus we can/should skip it, depending on the filters used, like 'ss -l'. Still, we should NOT skip it if the user is listing only listening endpoints, because then we are not traversing the transport hash. so we have to check idiag_states there also. Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller --- net/sctp/sctp_diag.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/sctp/sctp_diag.c b/net/sctp/sctp_diag.c index 8e3e769dc9ea..1ce724b87618 100644 --- a/net/sctp/sctp_diag.c +++ b/net/sctp/sctp_diag.c @@ -356,6 +356,9 @@ static int sctp_ep_dump(struct sctp_endpoint *ep, void *p) if (cb->args[4] < cb->args[1]) goto next; + if ((r->idiag_states & ~TCPF_LISTEN) && !list_empty(&ep->asocs)) + goto next; + if (r->sdiag_family != AF_UNSPEC && sk->sk_family != r->sdiag_family) goto next; From 63a664b7e92b14aaa1e1c3e9ae362aa70cf4cefb Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 25 May 2016 09:50:36 -0700 Subject: [PATCH 041/223] net/mlx4_en: fix tx_dropped bug 1) mlx4_en_xmit() can increment priv->stats.tx_dropped, but this variable is overwritten in mlx4_en_DUMP_ETH_STATS(). 2) This increment was not SMP safe, as a port might have many TX queues. Add a per TX ring tx_dropped to fix these issues. This is u32 as mlx4_en_DUMP_ETH_STATS() will add a 32bit field. So lets avoid bugs with SNMP agents having to cope with partial overwraps. (One of these agents being bond_fold_stats()) Signed-off-by: Eric Dumazet Reported-by: Willem de Bruijn Cc: Eugenia Emantayev Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 1 + drivers/net/ethernet/mellanox/mlx4/en_port.c | 4 +++- drivers/net/ethernet/mellanox/mlx4/en_tx.c | 8 ++++---- drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 1 + 4 files changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 92e0624f4cf0..cfd50206f7c3 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1892,6 +1892,7 @@ static void mlx4_en_clear_stats(struct net_device *dev) priv->tx_ring[i]->bytes = 0; priv->tx_ring[i]->packets = 0; priv->tx_ring[i]->tx_csum = 0; + priv->tx_ring[i]->tx_dropped = 0; } for (i = 0; i < priv->rx_ring_num; i++) { priv->rx_ring[i]->bytes = 0; diff --git a/drivers/net/ethernet/mellanox/mlx4/en_port.c b/drivers/net/ethernet/mellanox/mlx4/en_port.c index 20b6c2e678b8..3df8690154b1 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_port.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_port.c @@ -188,6 +188,7 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) } stats->tx_packets = 0; stats->tx_bytes = 0; + stats->tx_dropped = 0; priv->port_stats.tx_chksum_offload = 0; priv->port_stats.queue_stopped = 0; priv->port_stats.wake_queue = 0; @@ -199,6 +200,7 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) stats->tx_packets += ring->packets; stats->tx_bytes += ring->bytes; + stats->tx_dropped += ring->tx_dropped; priv->port_stats.tx_chksum_offload += ring->tx_csum; priv->port_stats.queue_stopped += ring->queue_stopped; priv->port_stats.wake_queue += ring->wake_queue; @@ -251,7 +253,7 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) stats->tx_fifo_errors = 0; stats->tx_heartbeat_errors = 0; stats->tx_window_errors = 0; - stats->tx_dropped = be32_to_cpu(mlx4_en_stats->TDROP); + stats->tx_dropped += be32_to_cpu(mlx4_en_stats->TDROP); /* RX stats */ priv->pkstats.rx_multicast_packets = stats->multicast; diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index f6e61570cb2c..76aa4d27183c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -726,12 +726,12 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) bool inline_ok; u32 ring_cons; - if (!priv->port_up) - goto tx_drop; - tx_ind = skb_get_queue_mapping(skb); ring = priv->tx_ring[tx_ind]; + if (!priv->port_up) + goto tx_drop; + /* fetch ring->cons far ahead before needing it to avoid stall */ ring_cons = ACCESS_ONCE(ring->cons); @@ -1030,7 +1030,7 @@ tx_drop_unmap: tx_drop: dev_kfree_skb_any(skb); - priv->stats.tx_dropped++; + ring->tx_dropped++; return NETDEV_TX_OK; } diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index cc84e09f324a..9a9124031fc7 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -270,6 +270,7 @@ struct mlx4_en_tx_ring { unsigned long tx_csum; unsigned long tso_packets; unsigned long xmit_more; + unsigned int tx_dropped; struct mlx4_bf bf; unsigned long queue_stopped; From 45acbac609e73991dd9c3c9b7ffd03ddb8c939ef Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 25 May 2016 09:50:37 -0700 Subject: [PATCH 042/223] net/mlx4_en: clear some TX ring stats in mlx4_en_clear_stats() mlx4_en_clear_stats() clears about everything but few TX ring fields are missing : - queue_stopped, wake_queue, tso_packets, xmit_more Signed-off-by: Eric Dumazet Cc: Willem de Bruijn Cc: Eugenia Emantayev Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index cfd50206f7c3..bd637c4eff13 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1893,6 +1893,10 @@ static void mlx4_en_clear_stats(struct net_device *dev) priv->tx_ring[i]->packets = 0; priv->tx_ring[i]->tx_csum = 0; priv->tx_ring[i]->tx_dropped = 0; + priv->tx_ring[i]->queue_stopped = 0; + priv->tx_ring[i]->wake_queue = 0; + priv->tx_ring[i]->tso_packets = 0; + priv->tx_ring[i]->xmit_more = 0; } for (i = 0; i < priv->rx_ring_num; i++) { priv->rx_ring[i]->bytes = 0; From 9ed17db17fb01a7be5b84558b768c091bdf8bb41 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 25 May 2016 09:50:38 -0700 Subject: [PATCH 043/223] net/mlx4_en: get rid of ret_stats mlx4 uses a private struct net_device_stats in a vain attempt to avoid races. This is buggy because multiple cpus could call mlx4_en_get_stats() at the same time, so ret_stats can not guarantee stable results. To fix this, we need to switch to ndo_get_stats64() as this method provides per-thread storage. This allows to reduce mlx4_en_priv bloat. Signed-off-by: Eric Dumazet Cc: Willem de Bruijn Cc: Eugenia Emantayev Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 11 ++++++----- drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 1 - 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index bd637c4eff13..a4fc6e966505 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1296,15 +1296,16 @@ static void mlx4_en_tx_timeout(struct net_device *dev) } -static struct net_device_stats *mlx4_en_get_stats(struct net_device *dev) +static struct rtnl_link_stats64 * +mlx4_en_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats) { struct mlx4_en_priv *priv = netdev_priv(dev); spin_lock_bh(&priv->stats_lock); - memcpy(&priv->ret_stats, &priv->stats, sizeof(priv->stats)); + netdev_stats_to_stats64(stats, &priv->stats); spin_unlock_bh(&priv->stats_lock); - return &priv->ret_stats; + return stats; } static void mlx4_en_set_default_moderation(struct mlx4_en_priv *priv) @@ -2487,7 +2488,7 @@ static const struct net_device_ops mlx4_netdev_ops = { .ndo_stop = mlx4_en_close, .ndo_start_xmit = mlx4_en_xmit, .ndo_select_queue = mlx4_en_select_queue, - .ndo_get_stats = mlx4_en_get_stats, + .ndo_get_stats64 = mlx4_en_get_stats64, .ndo_set_rx_mode = mlx4_en_set_rx_mode, .ndo_set_mac_address = mlx4_en_set_mac, .ndo_validate_addr = eth_validate_addr, @@ -2519,7 +2520,7 @@ static const struct net_device_ops mlx4_netdev_ops_master = { .ndo_stop = mlx4_en_close, .ndo_start_xmit = mlx4_en_xmit, .ndo_select_queue = mlx4_en_select_queue, - .ndo_get_stats = mlx4_en_get_stats, + .ndo_get_stats64 = mlx4_en_get_stats64, .ndo_set_rx_mode = mlx4_en_set_rx_mode, .ndo_set_mac_address = mlx4_en_set_mac, .ndo_validate_addr = eth_validate_addr, diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 9a9124031fc7..bfda84df8aae 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -484,7 +484,6 @@ struct mlx4_en_priv { struct net_device *dev; unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; struct net_device_stats stats; - struct net_device_stats ret_stats; struct mlx4_en_port_state port_state; spinlock_t stats_lock; struct ethtool_flow_id ethtool_rules[MAX_NUM_OF_FS_RULES]; From f73a6f439fca0e14f228726e5647d5afe141bc32 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 25 May 2016 09:50:39 -0700 Subject: [PATCH 044/223] net/mlx4_en: get rid of private net_device_stats We simply can use the standard net_device stats. We do not need to clear fields that are already 0. Signed-off-by: Eric Dumazet Cc: Willem de Bruijn Cc: Eugenia Emantayev Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 2 +- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 3 +-- drivers/net/ethernet/mellanox/mlx4/en_port.c | 14 +++----------- drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 1 - 4 files changed, 5 insertions(+), 15 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c index c761194bb323..fc95affaf76b 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c @@ -362,7 +362,7 @@ static void mlx4_en_get_ethtool_stats(struct net_device *dev, for (i = 0; i < NUM_MAIN_STATS; i++, bitmap_iterator_inc(&it)) if (bitmap_iterator_test(&it)) - data[index++] = ((unsigned long *)&priv->stats)[i]; + data[index++] = ((unsigned long *)&dev->stats)[i]; for (i = 0; i < NUM_PORT_STATS; i++, bitmap_iterator_inc(&it)) if (bitmap_iterator_test(&it)) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index a4fc6e966505..19ceced6736c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1302,7 +1302,7 @@ mlx4_en_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats) struct mlx4_en_priv *priv = netdev_priv(dev); spin_lock_bh(&priv->stats_lock); - netdev_stats_to_stats64(stats, &priv->stats); + netdev_stats_to_stats64(stats, &dev->stats); spin_unlock_bh(&priv->stats_lock); return stats; @@ -1877,7 +1877,6 @@ static void mlx4_en_clear_stats(struct net_device *dev) if (mlx4_en_DUMP_ETH_STATS(mdev, priv->port, 1)) en_dbg(HW, priv, "Failed dumping statistics\n"); - memset(&priv->stats, 0, sizeof(priv->stats)); memset(&priv->pstats, 0, sizeof(priv->pstats)); memset(&priv->pkstats, 0, sizeof(priv->pkstats)); memset(&priv->port_stats, 0, sizeof(priv->port_stats)); diff --git a/drivers/net/ethernet/mellanox/mlx4/en_port.c b/drivers/net/ethernet/mellanox/mlx4/en_port.c index 3df8690154b1..5aa8b751f417 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_port.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_port.c @@ -152,8 +152,9 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) struct mlx4_counter tmp_counter_stats; struct mlx4_en_stat_out_mbox *mlx4_en_stats; struct mlx4_en_stat_out_flow_control_mbox *flowstats; - struct mlx4_en_priv *priv = netdev_priv(mdev->pndev[port]); - struct net_device_stats *stats = &priv->stats; + struct net_device *dev = mdev->pndev[port]; + struct mlx4_en_priv *priv = netdev_priv(dev); + struct net_device_stats *stats = &dev->stats; struct mlx4_cmd_mailbox *mailbox; u64 in_mod = reset << 8 | port; int err; @@ -239,20 +240,11 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) stats->multicast = en_stats_adder(&mlx4_en_stats->MCAST_prio_0, &mlx4_en_stats->MCAST_prio_1, NUM_PRIORITIES); - stats->collisions = 0; stats->rx_dropped = be32_to_cpu(mlx4_en_stats->RDROP) + sw_rx_dropped; stats->rx_length_errors = be32_to_cpu(mlx4_en_stats->RdropLength); - stats->rx_over_errors = 0; stats->rx_crc_errors = be32_to_cpu(mlx4_en_stats->RCRC); - stats->rx_frame_errors = 0; stats->rx_fifo_errors = be32_to_cpu(mlx4_en_stats->RdropOvflw); - stats->rx_missed_errors = 0; - stats->tx_aborted_errors = 0; - stats->tx_carrier_errors = 0; - stats->tx_fifo_errors = 0; - stats->tx_heartbeat_errors = 0; - stats->tx_window_errors = 0; stats->tx_dropped += be32_to_cpu(mlx4_en_stats->TDROP); /* RX stats */ diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index bfda84df8aae..467d47ed2c39 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -483,7 +483,6 @@ struct mlx4_en_priv { struct mlx4_en_port_profile *prof; struct net_device *dev; unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; - struct net_device_stats stats; struct mlx4_en_port_state port_state; spinlock_t stats_lock; struct ethtool_flow_id ethtool_rules[MAX_NUM_OF_FS_RULES]; From be7b6d64c0f2f31ea03746edaabb22f57234cb49 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 26 May 2016 11:01:17 +0300 Subject: [PATCH 045/223] qede: Fix VF minimum BW setting VF is currently ignoring the minimum provided by the API, mistakenly using the maximum for minimum as well. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qede/qede_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index 337e839ca586..3bb1428e81b7 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -1824,7 +1824,7 @@ static int qede_set_vf_rate(struct net_device *dev, int vfidx, { struct qede_dev *edev = netdev_priv(dev); - return edev->ops->iov->set_rate(edev->cdev, vfidx, max_tx_rate, + return edev->ops->iov->set_rate(edev->cdev, vfidx, min_tx_rate, max_tx_rate); } From ce2b885cc5014d1cbcbe519c45f00f6a59e5ab70 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 26 May 2016 11:01:18 +0300 Subject: [PATCH 046/223] qede: Reload on GRO changes Since driver is using a FW-based GRO implementation, this has some effects on its ability to cope with GRO enablement/disablement. As a result, driver must perform an inner-reload as a result of a state change in the offload configuration of said feature. [Failure to do so means network stack would continue to receive aggregated packets even though user requested the feature to be disabled]. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qede/qede_main.c | 24 ++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index 3bb1428e81b7..5d00d1404bfc 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -2091,6 +2091,29 @@ static void qede_vlan_mark_nonconfigured(struct qede_dev *edev) edev->accept_any_vlan = false; } +int qede_set_features(struct net_device *dev, netdev_features_t features) +{ + struct qede_dev *edev = netdev_priv(dev); + netdev_features_t changes = features ^ dev->features; + bool need_reload = false; + + /* No action needed if hardware GRO is disabled during driver load */ + if (changes & NETIF_F_GRO) { + if (dev->features & NETIF_F_GRO) + need_reload = !edev->gro_disable; + else + need_reload = edev->gro_disable; + } + + if (need_reload && netif_running(edev->ndev)) { + dev->features = features; + qede_reload(edev, NULL, NULL); + return 1; + } + + return 0; +} + #ifdef CONFIG_QEDE_VXLAN static void qede_add_vxlan_port(struct net_device *dev, sa_family_t sa_family, __be16 port) @@ -2175,6 +2198,7 @@ static const struct net_device_ops qede_netdev_ops = { #endif .ndo_vlan_rx_add_vid = qede_vlan_rx_add_vid, .ndo_vlan_rx_kill_vid = qede_vlan_rx_kill_vid, + .ndo_set_features = qede_set_features, .ndo_get_stats64 = qede_get_stats64, #ifdef CONFIG_QED_SRIOV .ndo_set_vf_link_state = qede_set_vf_link_state, From 6ecb0a0c0d9539fac1497d1d218e60a393a1070c Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 26 May 2016 11:01:19 +0300 Subject: [PATCH 047/223] qede: Don't expose self-test for VFs PFs and VFs differ in their registered ethtool operations, but they're using a common function for get_sset_count(). As a result, `ethtool -i' for a VF would indicate it supports selftest, although that's not the case. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qede/qede_ethtool.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qede/qede_ethtool.c b/drivers/net/ethernet/qlogic/qede/qede_ethtool.c index 1bc75358cbc4..ad3cae3b7243 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_ethtool.c +++ b/drivers/net/ethernet/qlogic/qede/qede_ethtool.c @@ -230,7 +230,10 @@ static int qede_get_sset_count(struct net_device *dev, int stringset) case ETH_SS_PRIV_FLAGS: return QEDE_PRI_FLAG_LEN; case ETH_SS_TEST: - return QEDE_ETHTOOL_TEST_MAX; + if (!IS_VF(edev)) + return QEDE_ETHTOOL_TEST_MAX; + else + return 0; default: DP_VERBOSE(edev, QED_MSG_DEBUG, "Unsupported stringset 0x%08x\n", stringset); From 795292916cf9d8c47c53b692bcb36b02953101cf Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Thu, 26 May 2016 11:01:20 +0300 Subject: [PATCH 048/223] qed: Fix allocation in interrupt context Commit 39651abd2814 ("qed: add support for dcbx") is re-configuring the QM hw-block as part of its sequence. This is done in attention handling context which is non-sleepable, yet memory is allocated in this flow using GFP_KERNEL. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dev.c | 27 ++++++++++++++--------- 1 file changed, 16 insertions(+), 11 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index 089016f46f26..7aeed2fa2b18 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -155,7 +155,7 @@ void qed_resc_free(struct qed_dev *cdev) } } -static int qed_init_qm_info(struct qed_hwfn *p_hwfn) +static int qed_init_qm_info(struct qed_hwfn *p_hwfn, bool b_sleepable) { u8 num_vports, vf_offset = 0, i, vport_id, num_ports, curr_queue = 0; struct qed_qm_info *qm_info = &p_hwfn->qm_info; @@ -182,23 +182,28 @@ static int qed_init_qm_info(struct qed_hwfn *p_hwfn) /* PQs will be arranged as follows: First per-TC PQ then pure-LB quete. */ - qm_info->qm_pq_params = kzalloc(sizeof(*qm_info->qm_pq_params) * - num_pqs, GFP_KERNEL); + qm_info->qm_pq_params = kcalloc(num_pqs, + sizeof(struct init_qm_pq_params), + b_sleepable ? GFP_KERNEL : GFP_ATOMIC); if (!qm_info->qm_pq_params) goto alloc_err; - qm_info->qm_vport_params = kzalloc(sizeof(*qm_info->qm_vport_params) * - num_vports, GFP_KERNEL); + qm_info->qm_vport_params = kcalloc(num_vports, + sizeof(struct init_qm_vport_params), + b_sleepable ? GFP_KERNEL + : GFP_ATOMIC); if (!qm_info->qm_vport_params) goto alloc_err; - qm_info->qm_port_params = kzalloc(sizeof(*qm_info->qm_port_params) * - MAX_NUM_PORTS, GFP_KERNEL); + qm_info->qm_port_params = kcalloc(MAX_NUM_PORTS, + sizeof(struct init_qm_port_params), + b_sleepable ? GFP_KERNEL + : GFP_ATOMIC); if (!qm_info->qm_port_params) goto alloc_err; - qm_info->wfq_data = kcalloc(num_vports, sizeof(*qm_info->wfq_data), - GFP_KERNEL); + qm_info->wfq_data = kcalloc(num_vports, sizeof(struct qed_wfq_data), + b_sleepable ? GFP_KERNEL : GFP_ATOMIC); if (!qm_info->wfq_data) goto alloc_err; @@ -299,7 +304,7 @@ int qed_qm_reconf(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) qed_qm_info_free(p_hwfn); /* initialize qed's qm data structure */ - rc = qed_init_qm_info(p_hwfn); + rc = qed_init_qm_info(p_hwfn, false); if (rc) return rc; @@ -388,7 +393,7 @@ int qed_resc_alloc(struct qed_dev *cdev) goto alloc_err; /* Prepare and process QM requirements */ - rc = qed_init_qm_info(p_hwfn); + rc = qed_init_qm_info(p_hwfn, true); if (rc) goto alloc_err; From cc3d5eb09111a471f942c76e9610ee962e1d4c31 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 26 May 2016 11:01:21 +0300 Subject: [PATCH 049/223] qed: Save min/max accross dcbx-change When DCBx re-negotiation is occurring, the PF's configurations for maximum and minimum bandwidth guarantees are currently lost. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dev.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index 7aeed2fa2b18..920eadd6417c 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -161,6 +161,8 @@ static int qed_init_qm_info(struct qed_hwfn *p_hwfn, bool b_sleepable) struct qed_qm_info *qm_info = &p_hwfn->qm_info; struct init_qm_port_params *p_qm_port; u16 num_pqs, multi_cos_tcs = 1; + u8 pf_wfq = qm_info->pf_wfq; + u32 pf_rl = qm_info->pf_rl; u16 num_vfs = 0; #ifdef CONFIG_QED_SRIOV @@ -269,10 +271,10 @@ static int qed_init_qm_info(struct qed_hwfn *p_hwfn, bool b_sleepable) for (i = 0; i < qm_info->num_vports; i++) qm_info->qm_vport_params[i].vport_wfq = 1; - qm_info->pf_wfq = 0; - qm_info->pf_rl = 0; qm_info->vport_rl_en = 1; qm_info->vport_wfq_en = 1; + qm_info->pf_rl = pf_rl; + qm_info->pf_wfq = pf_wfq; return 0; From 1af9dcf7f90e6b75b7c42eaaf19cdd5da1354784 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 26 May 2016 11:01:22 +0300 Subject: [PATCH 050/223] qed: Add missing 100g init mode Some of the HW configurations are currently missing for 100g devices. This can cause various classification issues, as well as prevent device from fully reaching line-rate. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dev.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index 920eadd6417c..2a7c8755eda0 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -588,7 +588,14 @@ static void qed_calc_hw_mode(struct qed_hwfn *p_hwfn) hw_mode |= 1 << MODE_ASIC; + if (p_hwfn->cdev->num_hwfns > 1) + hw_mode |= 1 << MODE_100G; + p_hwfn->hw_info.hw_mode = hw_mode; + + DP_VERBOSE(p_hwfn, (NETIF_MSG_PROBE | NETIF_MSG_IFUP), + "Configuring function for hw_mode: 0x%08x\n", + p_hwfn->hw_info.hw_mode); } /* Init run time data for all PFs on an engine. */ From bb13ace7dca5d2385847e43511acf5777da35c0e Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Thu, 26 May 2016 11:01:23 +0300 Subject: [PATCH 051/223] qed: Prevent 100g from working in MSI Adapter can support 100g in both MSIx and INTa, but not in MSI. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dev.c | 5 +++++ drivers/net/ethernet/qlogic/qed/qed_main.c | 18 ++++++++++-------- 2 files changed, 15 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index 2a7c8755eda0..579c6d500865 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -835,6 +835,11 @@ int qed_hw_init(struct qed_dev *cdev, u32 load_code, param; int rc, mfw_rc, i; + if ((int_mode == QED_INT_MODE_MSI) && (cdev->num_hwfns > 1)) { + DP_NOTICE(cdev, "MSI mode is not supported for CMT devices\n"); + return -EINVAL; + } + if (IS_PF(cdev)) { rc = qed_init_fw_data(cdev, bin_fw_data); if (rc != 0) diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c index 8b22f87033ce..753064679bde 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_main.c +++ b/drivers/net/ethernet/qlogic/qed/qed_main.c @@ -413,15 +413,17 @@ static int qed_set_int_mode(struct qed_dev *cdev, bool force_mode) /* Fallthrough */ case QED_INT_MODE_MSI: - rc = pci_enable_msi(cdev->pdev); - if (!rc) { - int_params->out.int_mode = QED_INT_MODE_MSI; - goto out; - } + if (cdev->num_hwfns == 1) { + rc = pci_enable_msi(cdev->pdev); + if (!rc) { + int_params->out.int_mode = QED_INT_MODE_MSI; + goto out; + } - DP_NOTICE(cdev, "Failed to enable MSI\n"); - if (force_mode) - goto out; + DP_NOTICE(cdev, "Failed to enable MSI\n"); + if (force_mode) + goto out; + } /* Fallthrough */ case QED_INT_MODE_INTA: From 3e7cfce228c6c67dd31e09175eaca55fee0c7082 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 26 May 2016 11:01:24 +0300 Subject: [PATCH 052/223] qed: Don't config min BW on 100g on link flap Currently 100g devices don't support minimum/maximum BW configurations, yet link flaps might cause the driver to attempt to do such a configuration. Prevent this just as we do for the maximum BW. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dev.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index 579c6d500865..2d89e8c16b32 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -2105,6 +2105,13 @@ void qed_configure_vp_wfq_on_link_change(struct qed_dev *cdev, u32 min_pf_rate) { int i; + if (cdev->num_hwfns > 1) { + DP_VERBOSE(cdev, + NETIF_MSG_LINK, + "WFQ configuration is not supported for this device\n"); + return; + } + for_each_hwfn(cdev, i) { struct qed_hwfn *p_hwfn = &cdev->hwfns[i]; From d11c2a0de2824395656cf8ed15811580c9dd38aa Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 28 May 2016 21:21:31 -0700 Subject: [PATCH 053/223] sparc: Harden signal return frame checks. All signal frames must be at least 16-byte aligned, because that is the alignment we explicitly create when we build signal return stack frames. All stack pointers must be at least 8-byte aligned. Signed-off-by: David S. Miller --- arch/sparc/kernel/signal32.c | 46 ++++++++++++++++++++++------------ arch/sparc/kernel/signal_32.c | 41 +++++++++++++++++++----------- arch/sparc/kernel/signal_64.c | 31 +++++++++++++++-------- arch/sparc/kernel/sigutil_32.c | 9 ++++++- arch/sparc/kernel/sigutil_64.c | 10 ++++++-- 5 files changed, 92 insertions(+), 45 deletions(-) diff --git a/arch/sparc/kernel/signal32.c b/arch/sparc/kernel/signal32.c index 3c25241fa5cb..91cc2f4ae4d9 100644 --- a/arch/sparc/kernel/signal32.c +++ b/arch/sparc/kernel/signal32.c @@ -138,12 +138,24 @@ int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from) return 0; } +/* Checks if the fp is valid. We always build signal frames which are + * 16-byte aligned, therefore we can always enforce that the restore + * frame has that property as well. + */ +static bool invalid_frame_pointer(void __user *fp, int fplen) +{ + if ((((unsigned long) fp) & 15) || + ((unsigned long)fp) > 0x100000000ULL - fplen) + return true; + return false; +} + void do_sigreturn32(struct pt_regs *regs) { struct signal_frame32 __user *sf; compat_uptr_t fpu_save; compat_uptr_t rwin_save; - unsigned int psr; + unsigned int psr, ufp; unsigned int pc, npc; sigset_t set; compat_sigset_t seta; @@ -158,11 +170,16 @@ void do_sigreturn32(struct pt_regs *regs) sf = (struct signal_frame32 __user *) regs->u_regs[UREG_FP]; /* 1. Make sure we are not getting garbage from the user */ - if (!access_ok(VERIFY_READ, sf, sizeof(*sf)) || - (((unsigned long) sf) & 3)) + if (invalid_frame_pointer(sf, sizeof(*sf))) goto segv; - if (get_user(pc, &sf->info.si_regs.pc) || + if (get_user(ufp, &sf->info.si_regs.u_regs[UREG_FP])) + goto segv; + + if (ufp & 0x7) + goto segv; + + if (__get_user(pc, &sf->info.si_regs.pc) || __get_user(npc, &sf->info.si_regs.npc)) goto segv; @@ -227,7 +244,7 @@ segv: asmlinkage void do_rt_sigreturn32(struct pt_regs *regs) { struct rt_signal_frame32 __user *sf; - unsigned int psr, pc, npc; + unsigned int psr, pc, npc, ufp; compat_uptr_t fpu_save; compat_uptr_t rwin_save; sigset_t set; @@ -242,11 +259,16 @@ asmlinkage void do_rt_sigreturn32(struct pt_regs *regs) sf = (struct rt_signal_frame32 __user *) regs->u_regs[UREG_FP]; /* 1. Make sure we are not getting garbage from the user */ - if (!access_ok(VERIFY_READ, sf, sizeof(*sf)) || - (((unsigned long) sf) & 3)) + if (invalid_frame_pointer(sf, sizeof(*sf))) goto segv; - if (get_user(pc, &sf->regs.pc) || + if (get_user(ufp, &sf->regs.u_regs[UREG_FP])) + goto segv; + + if (ufp & 0x7) + goto segv; + + if (__get_user(pc, &sf->regs.pc) || __get_user(npc, &sf->regs.npc)) goto segv; @@ -307,14 +329,6 @@ segv: force_sig(SIGSEGV, current); } -/* Checks if the fp is valid */ -static int invalid_frame_pointer(void __user *fp, int fplen) -{ - if ((((unsigned long) fp) & 7) || ((unsigned long)fp) > 0x100000000ULL - fplen) - return 1; - return 0; -} - static void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs, unsigned long framesize) { unsigned long sp; diff --git a/arch/sparc/kernel/signal_32.c b/arch/sparc/kernel/signal_32.c index 52aa5e4ce5e7..c3c12efe0bc0 100644 --- a/arch/sparc/kernel/signal_32.c +++ b/arch/sparc/kernel/signal_32.c @@ -60,10 +60,22 @@ struct rt_signal_frame { #define SF_ALIGNEDSZ (((sizeof(struct signal_frame) + 7) & (~7))) #define RT_ALIGNEDSZ (((sizeof(struct rt_signal_frame) + 7) & (~7))) +/* Checks if the fp is valid. We always build signal frames which are + * 16-byte aligned, therefore we can always enforce that the restore + * frame has that property as well. + */ +static inline bool invalid_frame_pointer(void __user *fp, int fplen) +{ + if ((((unsigned long) fp) & 15) || !__access_ok((unsigned long)fp, fplen)) + return true; + + return false; +} + asmlinkage void do_sigreturn(struct pt_regs *regs) { + unsigned long up_psr, pc, npc, ufp; struct signal_frame __user *sf; - unsigned long up_psr, pc, npc; sigset_t set; __siginfo_fpu_t __user *fpu_save; __siginfo_rwin_t __user *rwin_save; @@ -77,10 +89,13 @@ asmlinkage void do_sigreturn(struct pt_regs *regs) sf = (struct signal_frame __user *) regs->u_regs[UREG_FP]; /* 1. Make sure we are not getting garbage from the user */ - if (!access_ok(VERIFY_READ, sf, sizeof(*sf))) + if (!invalid_frame_pointer(sf, sizeof(*sf))) goto segv_and_exit; - if (((unsigned long) sf) & 3) + if (get_user(ufp, &sf->info.si_regs.u_regs[UREG_FP])) + goto segv_and_exit; + + if (ufp & 0x7) goto segv_and_exit; err = __get_user(pc, &sf->info.si_regs.pc); @@ -127,7 +142,7 @@ segv_and_exit: asmlinkage void do_rt_sigreturn(struct pt_regs *regs) { struct rt_signal_frame __user *sf; - unsigned int psr, pc, npc; + unsigned int psr, pc, npc, ufp; __siginfo_fpu_t __user *fpu_save; __siginfo_rwin_t __user *rwin_save; sigset_t set; @@ -135,8 +150,13 @@ asmlinkage void do_rt_sigreturn(struct pt_regs *regs) synchronize_user_stack(); sf = (struct rt_signal_frame __user *) regs->u_regs[UREG_FP]; - if (!access_ok(VERIFY_READ, sf, sizeof(*sf)) || - (((unsigned long) sf) & 0x03)) + if (!invalid_frame_pointer(sf, sizeof(*sf))) + goto segv; + + if (get_user(ufp, &sf->regs.u_regs[UREG_FP])) + goto segv; + + if (ufp & 0x7) goto segv; err = __get_user(pc, &sf->regs.pc); @@ -178,15 +198,6 @@ segv: force_sig(SIGSEGV, current); } -/* Checks if the fp is valid */ -static inline int invalid_frame_pointer(void __user *fp, int fplen) -{ - if ((((unsigned long) fp) & 7) || !__access_ok((unsigned long)fp, fplen)) - return 1; - - return 0; -} - static inline void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs, unsigned long framesize) { unsigned long sp = regs->u_regs[UREG_FP]; diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c index 39aaec173f66..5ee930c48f4c 100644 --- a/arch/sparc/kernel/signal_64.c +++ b/arch/sparc/kernel/signal_64.c @@ -234,6 +234,17 @@ do_sigsegv: goto out; } +/* Checks if the fp is valid. We always build rt signal frames which + * are 16-byte aligned, therefore we can always enforce that the + * restore frame has that property as well. + */ +static bool invalid_frame_pointer(void __user *fp) +{ + if (((unsigned long) fp) & 15) + return true; + return false; +} + struct rt_signal_frame { struct sparc_stackf ss; siginfo_t info; @@ -246,8 +257,8 @@ struct rt_signal_frame { void do_rt_sigreturn(struct pt_regs *regs) { + unsigned long tpc, tnpc, tstate, ufp; struct rt_signal_frame __user *sf; - unsigned long tpc, tnpc, tstate; __siginfo_fpu_t __user *fpu_save; __siginfo_rwin_t __user *rwin_save; sigset_t set; @@ -261,10 +272,16 @@ void do_rt_sigreturn(struct pt_regs *regs) (regs->u_regs [UREG_FP] + STACK_BIAS); /* 1. Make sure we are not getting garbage from the user */ - if (((unsigned long) sf) & 3) + if (invalid_frame_pointer(sf)) goto segv; - err = get_user(tpc, &sf->regs.tpc); + if (get_user(ufp, &sf->regs.u_regs[UREG_FP])) + goto segv; + + if ((ufp + STACK_BIAS) & 0x7) + goto segv; + + err = __get_user(tpc, &sf->regs.tpc); err |= __get_user(tnpc, &sf->regs.tnpc); if (test_thread_flag(TIF_32BIT)) { tpc &= 0xffffffff; @@ -308,14 +325,6 @@ segv: force_sig(SIGSEGV, current); } -/* Checks if the fp is valid */ -static int invalid_frame_pointer(void __user *fp) -{ - if (((unsigned long) fp) & 15) - return 1; - return 0; -} - static inline void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs, unsigned long framesize) { unsigned long sp = regs->u_regs[UREG_FP] + STACK_BIAS; diff --git a/arch/sparc/kernel/sigutil_32.c b/arch/sparc/kernel/sigutil_32.c index 0f6eebe71e6c..e5fe8cef9a69 100644 --- a/arch/sparc/kernel/sigutil_32.c +++ b/arch/sparc/kernel/sigutil_32.c @@ -48,6 +48,10 @@ int save_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) int restore_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) { int err; + + if (((unsigned long) fpu) & 3) + return -EFAULT; + #ifdef CONFIG_SMP if (test_tsk_thread_flag(current, TIF_USEDFPU)) regs->psr &= ~PSR_EF; @@ -97,7 +101,10 @@ int restore_rwin_state(__siginfo_rwin_t __user *rp) struct thread_info *t = current_thread_info(); int i, wsaved, err; - __get_user(wsaved, &rp->wsaved); + if (((unsigned long) rp) & 3) + return -EFAULT; + + get_user(wsaved, &rp->wsaved); if (wsaved > NSWINS) return -EFAULT; diff --git a/arch/sparc/kernel/sigutil_64.c b/arch/sparc/kernel/sigutil_64.c index 387834a9c56a..36aadcbeac69 100644 --- a/arch/sparc/kernel/sigutil_64.c +++ b/arch/sparc/kernel/sigutil_64.c @@ -37,7 +37,10 @@ int restore_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) unsigned long fprs; int err; - err = __get_user(fprs, &fpu->si_fprs); + if (((unsigned long) fpu) & 7) + return -EFAULT; + + err = get_user(fprs, &fpu->si_fprs); fprs_write(0); regs->tstate &= ~TSTATE_PEF; if (fprs & FPRS_DL) @@ -72,7 +75,10 @@ int restore_rwin_state(__siginfo_rwin_t __user *rp) struct thread_info *t = current_thread_info(); int i, wsaved, err; - __get_user(wsaved, &rp->wsaved); + if (((unsigned long) rp) & 7) + return -EFAULT; + + get_user(wsaved, &rp->wsaved); if (wsaved > NSWINS) return -EFAULT; From 7cafc0b8bf130f038b0ec2dcdd6a9de6dc59b65a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 28 May 2016 20:41:12 -0700 Subject: [PATCH 054/223] sparc64: Fix return from trap window fill crashes. We must handle data access exception as well as memory address unaligned exceptions from return from trap window fill faults, not just normal TLB misses. Otherwise we can get an OOPS that looks like this: ld-linux.so.2(36808): Kernel bad sw trap 5 [#1] CPU: 1 PID: 36808 Comm: ld-linux.so.2 Not tainted 4.6.0 #34 task: fff8000303be5c60 ti: fff8000301344000 task.ti: fff8000301344000 TSTATE: 0000004410001601 TPC: 0000000000a1a784 TNPC: 0000000000a1a788 Y: 00000002 Not tainted TPC: g0: fff8000024fc8248 g1: 0000000000db04dc g2: 0000000000000000 g3: 0000000000000001 g4: fff8000303be5c60 g5: fff800030e672000 g6: fff8000301344000 g7: 0000000000000001 o0: 0000000000b95ee8 o1: 000000000000012b o2: 0000000000000000 o3: 0000000200b9b358 o4: 0000000000000000 o5: fff8000301344040 sp: fff80003013475c1 ret_pc: 0000000000a1a77c RPC: l0: 00000000000007ff l1: 0000000000000000 l2: 000000000000005f l3: 0000000000000000 l4: fff8000301347e98 l5: fff8000024ff3060 l6: 0000000000000000 l7: 0000000000000000 i0: fff8000301347f60 i1: 0000000000102400 i2: 0000000000000000 i3: 0000000000000000 i4: 0000000000000000 i5: 0000000000000000 i6: fff80003013476a1 i7: 0000000000404d4c I7: Call Trace: [0000000000404d4c] user_rtt_fill_fixup+0x6c/0x7c The window trap handlers are slightly clever, the trap table entries for them are composed of two pieces of code. First comes the code that actually performs the window fill or spill trap handling, and then there are three instructions at the end which are for exception processing. The userland register window fill handler is: add %sp, STACK_BIAS + 0x00, %g1; \ ldxa [%g1 + %g0] ASI, %l0; \ mov 0x08, %g2; \ mov 0x10, %g3; \ ldxa [%g1 + %g2] ASI, %l1; \ mov 0x18, %g5; \ ldxa [%g1 + %g3] ASI, %l2; \ ldxa [%g1 + %g5] ASI, %l3; \ add %g1, 0x20, %g1; \ ldxa [%g1 + %g0] ASI, %l4; \ ldxa [%g1 + %g2] ASI, %l5; \ ldxa [%g1 + %g3] ASI, %l6; \ ldxa [%g1 + %g5] ASI, %l7; \ add %g1, 0x20, %g1; \ ldxa [%g1 + %g0] ASI, %i0; \ ldxa [%g1 + %g2] ASI, %i1; \ ldxa [%g1 + %g3] ASI, %i2; \ ldxa [%g1 + %g5] ASI, %i3; \ add %g1, 0x20, %g1; \ ldxa [%g1 + %g0] ASI, %i4; \ ldxa [%g1 + %g2] ASI, %i5; \ ldxa [%g1 + %g3] ASI, %i6; \ ldxa [%g1 + %g5] ASI, %i7; \ restored; \ retry; nop; nop; nop; nop; \ b,a,pt %xcc, fill_fixup_dax; \ b,a,pt %xcc, fill_fixup_mna; \ b,a,pt %xcc, fill_fixup; And the way this works is that if any of those memory accesses generate an exception, the exception handler can revector to one of those final three branch instructions depending upon which kind of exception the memory access took. In this way, the fault handler doesn't have to know if it was a spill or a fill that it's handling the fault for. It just always branches to the last instruction in the parent trap's handler. For example, for a regular fault, the code goes: winfix_trampoline: rdpr %tpc, %g3 or %g3, 0x7c, %g3 wrpr %g3, %tnpc done All window trap handlers are 0x80 aligned, so if we "or" 0x7c into the trap time program counter, we'll get that final instruction in the trap handler. On return from trap, we have to pull the register window in but we do this by hand instead of just executing a "restore" instruction for several reasons. The largest being that from Niagara and onward we simply don't have enough levels in the trap stack to fully resolve all possible exception cases of a window fault when we are already at trap level 1 (which we enter to get ready to return from the original trap). This is executed inline via the FILL_*_RTRAP handlers. rtrap_64.S's code branches directly to these to do the window fill by hand if necessary. Now if you look at them, we'll see at the end: ba,a,pt %xcc, user_rtt_fill_fixup; ba,a,pt %xcc, user_rtt_fill_fixup; ba,a,pt %xcc, user_rtt_fill_fixup; And oops, all three cases are handled like a fault. This doesn't work because each of these trap types (data access exception, memory address unaligned, and faults) store their auxiliary info in different registers to pass on to the C handler which does the real work. So in the case where the stack was unaligned, the unaligned trap handler sets up the arg registers one way, and then we branched to the fault handler which expects them setup another way. So the FAULT_TYPE_* value ends up basically being garbage, and randomly would generate the backtrace seen above. Reported-by: Nick Alcock Signed-off-by: David S. Miller --- arch/sparc/include/asm/head_64.h | 4 ++ arch/sparc/include/asm/ttable.h | 8 +-- arch/sparc/kernel/Makefile | 1 + arch/sparc/kernel/rtrap_64.S | 59 ++++--------------- arch/sparc/kernel/urtt_fill.S | 98 ++++++++++++++++++++++++++++++++ 5 files changed, 117 insertions(+), 53 deletions(-) create mode 100644 arch/sparc/kernel/urtt_fill.S diff --git a/arch/sparc/include/asm/head_64.h b/arch/sparc/include/asm/head_64.h index 10e9dabc4c41..f0700cfeedd7 100644 --- a/arch/sparc/include/asm/head_64.h +++ b/arch/sparc/include/asm/head_64.h @@ -15,6 +15,10 @@ #define PTREGS_OFF (STACK_BIAS + STACKFRAME_SZ) +#define RTRAP_PSTATE (PSTATE_TSO|PSTATE_PEF|PSTATE_PRIV|PSTATE_IE) +#define RTRAP_PSTATE_IRQOFF (PSTATE_TSO|PSTATE_PEF|PSTATE_PRIV) +#define RTRAP_PSTATE_AG_IRQOFF (PSTATE_TSO|PSTATE_PEF|PSTATE_PRIV|PSTATE_AG) + #define __CHEETAH_ID 0x003e0014 #define __JALAPENO_ID 0x003e0016 #define __SERRANO_ID 0x003e0022 diff --git a/arch/sparc/include/asm/ttable.h b/arch/sparc/include/asm/ttable.h index 71b5a67522ab..781b9f1dbdc2 100644 --- a/arch/sparc/include/asm/ttable.h +++ b/arch/sparc/include/asm/ttable.h @@ -589,8 +589,8 @@ user_rtt_fill_64bit: \ restored; \ nop; nop; nop; nop; nop; nop; \ nop; nop; nop; nop; nop; \ - ba,a,pt %xcc, user_rtt_fill_fixup; \ - ba,a,pt %xcc, user_rtt_fill_fixup; \ + ba,a,pt %xcc, user_rtt_fill_fixup_dax; \ + ba,a,pt %xcc, user_rtt_fill_fixup_mna; \ ba,a,pt %xcc, user_rtt_fill_fixup; @@ -652,8 +652,8 @@ user_rtt_fill_32bit: \ restored; \ nop; nop; nop; nop; nop; \ nop; nop; nop; \ - ba,a,pt %xcc, user_rtt_fill_fixup; \ - ba,a,pt %xcc, user_rtt_fill_fixup; \ + ba,a,pt %xcc, user_rtt_fill_fixup_dax; \ + ba,a,pt %xcc, user_rtt_fill_fixup_mna; \ ba,a,pt %xcc, user_rtt_fill_fixup; diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile index 7cf9c6ea3f1f..fdb13327fded 100644 --- a/arch/sparc/kernel/Makefile +++ b/arch/sparc/kernel/Makefile @@ -21,6 +21,7 @@ CFLAGS_REMOVE_perf_event.o := -pg CFLAGS_REMOVE_pcr.o := -pg endif +obj-$(CONFIG_SPARC64) += urtt_fill.o obj-$(CONFIG_SPARC32) += entry.o wof.o wuf.o obj-$(CONFIG_SPARC32) += etrap_32.o obj-$(CONFIG_SPARC32) += rtrap_32.o diff --git a/arch/sparc/kernel/rtrap_64.S b/arch/sparc/kernel/rtrap_64.S index d08bdaffdbfc..216948ca4382 100644 --- a/arch/sparc/kernel/rtrap_64.S +++ b/arch/sparc/kernel/rtrap_64.S @@ -14,10 +14,6 @@ #include #include -#define RTRAP_PSTATE (PSTATE_TSO|PSTATE_PEF|PSTATE_PRIV|PSTATE_IE) -#define RTRAP_PSTATE_IRQOFF (PSTATE_TSO|PSTATE_PEF|PSTATE_PRIV) -#define RTRAP_PSTATE_AG_IRQOFF (PSTATE_TSO|PSTATE_PEF|PSTATE_PRIV|PSTATE_AG) - #ifdef CONFIG_CONTEXT_TRACKING # define SCHEDULE_USER schedule_user #else @@ -242,52 +238,17 @@ rt_continue: ldx [%sp + PTREGS_OFF + PT_V9_G1], %g1 wrpr %g1, %cwp ba,a,pt %xcc, user_rtt_fill_64bit +user_rtt_fill_fixup_dax: + ba,pt %xcc, user_rtt_fill_fixup_common + mov 1, %g3 + +user_rtt_fill_fixup_mna: + ba,pt %xcc, user_rtt_fill_fixup_common + mov 2, %g3 + user_rtt_fill_fixup: - rdpr %cwp, %g1 - add %g1, 1, %g1 - wrpr %g1, 0x0, %cwp - - rdpr %wstate, %g2 - sll %g2, 3, %g2 - wrpr %g2, 0x0, %wstate - - /* We know %canrestore and %otherwin are both zero. */ - - sethi %hi(sparc64_kern_pri_context), %g2 - ldx [%g2 + %lo(sparc64_kern_pri_context)], %g2 - mov PRIMARY_CONTEXT, %g1 - -661: stxa %g2, [%g1] ASI_DMMU - .section .sun4v_1insn_patch, "ax" - .word 661b - stxa %g2, [%g1] ASI_MMU - .previous - - sethi %hi(KERNBASE), %g1 - flush %g1 - - or %g4, FAULT_CODE_WINFIXUP, %g4 - stb %g4, [%g6 + TI_FAULT_CODE] - stx %g5, [%g6 + TI_FAULT_ADDR] - - mov %g6, %l1 - wrpr %g0, 0x0, %tl - -661: nop - .section .sun4v_1insn_patch, "ax" - .word 661b - SET_GL(0) - .previous - - wrpr %g0, RTRAP_PSTATE, %pstate - - mov %l1, %g6 - ldx [%g6 + TI_TASK], %g4 - LOAD_PER_CPU_BASE(%g5, %g6, %g1, %g2, %g3) - call do_sparc64_fault - add %sp, PTREGS_OFF, %o0 - ba,pt %xcc, rtrap - nop + ba,pt %xcc, user_rtt_fill_fixup_common + clr %g3 user_rtt_pre_restore: add %g1, 1, %g1 diff --git a/arch/sparc/kernel/urtt_fill.S b/arch/sparc/kernel/urtt_fill.S new file mode 100644 index 000000000000..5604a2b051d4 --- /dev/null +++ b/arch/sparc/kernel/urtt_fill.S @@ -0,0 +1,98 @@ +#include +#include +#include +#include +#include + + .text + .align 8 + .globl user_rtt_fill_fixup_common +user_rtt_fill_fixup_common: + rdpr %cwp, %g1 + add %g1, 1, %g1 + wrpr %g1, 0x0, %cwp + + rdpr %wstate, %g2 + sll %g2, 3, %g2 + wrpr %g2, 0x0, %wstate + + /* We know %canrestore and %otherwin are both zero. */ + + sethi %hi(sparc64_kern_pri_context), %g2 + ldx [%g2 + %lo(sparc64_kern_pri_context)], %g2 + mov PRIMARY_CONTEXT, %g1 + +661: stxa %g2, [%g1] ASI_DMMU + .section .sun4v_1insn_patch, "ax" + .word 661b + stxa %g2, [%g1] ASI_MMU + .previous + + sethi %hi(KERNBASE), %g1 + flush %g1 + + mov %g4, %l4 + mov %g5, %l5 + brnz,pn %g3, 1f + mov %g3, %l3 + + or %g4, FAULT_CODE_WINFIXUP, %g4 + stb %g4, [%g6 + TI_FAULT_CODE] + stx %g5, [%g6 + TI_FAULT_ADDR] +1: + mov %g6, %l1 + wrpr %g0, 0x0, %tl + +661: nop + .section .sun4v_1insn_patch, "ax" + .word 661b + SET_GL(0) + .previous + + wrpr %g0, RTRAP_PSTATE, %pstate + + mov %l1, %g6 + ldx [%g6 + TI_TASK], %g4 + LOAD_PER_CPU_BASE(%g5, %g6, %g1, %g2, %g3) + + brnz,pn %l3, 1f + nop + + call do_sparc64_fault + add %sp, PTREGS_OFF, %o0 + ba,pt %xcc, rtrap + nop + +1: cmp %g3, 2 + bne,pn %xcc, 2f + nop + + sethi %hi(tlb_type), %g1 + lduw [%g1 + %lo(tlb_type)], %g1 + cmp %g1, 3 + bne,pt %icc, 1f + add %sp, PTREGS_OFF, %o0 + mov %l4, %o2 + call sun4v_do_mna + mov %l5, %o1 + ba,a,pt %xcc, rtrap +1: mov %l4, %o1 + mov %l5, %o2 + call mem_address_unaligned + nop + ba,a,pt %xcc, rtrap + +2: sethi %hi(tlb_type), %g1 + mov %l4, %o1 + lduw [%g1 + %lo(tlb_type)], %g1 + mov %l5, %o2 + cmp %g1, 3 + bne,pt %icc, 1f + add %sp, PTREGS_OFF, %o0 + call sun4v_data_access_exception + nop + ba,a,pt %xcc, rtrap + +1: call spitfire_data_access_exception + nop + ba,a,pt %xcc, rtrap From 871e178e0f2c4fa788f694721a10b4758d494ce1 Mon Sep 17 00:00:00 2001 From: Russell Currey Date: Thu, 7 Apr 2016 16:28:26 +1000 Subject: [PATCH 055/223] powerpc/pseries/eeh: Handle RTAS delay requests in configure_bridge In the "ibm,configure-pe" and "ibm,configure-bridge" RTAS calls, the spec states that values of 9900-9905 can be returned, indicating that software should delay for 10^x (where x is the last digit, i.e. 990x) milliseconds and attempt the call again. Currently, the kernel doesn't know about this, and respecting it fixes some PCI failures when the hypervisor is busy. The delay is capped at 0.2 seconds. Cc: # 3.10+ Signed-off-by: Russell Currey Acked-by: Gavin Shan Signed-off-by: Michael Ellerman --- arch/powerpc/platforms/pseries/eeh_pseries.c | 51 ++++++++++++++------ 1 file changed, 36 insertions(+), 15 deletions(-) diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c index ac3ffd97e059..405baaf96864 100644 --- a/arch/powerpc/platforms/pseries/eeh_pseries.c +++ b/arch/powerpc/platforms/pseries/eeh_pseries.c @@ -615,29 +615,50 @@ static int pseries_eeh_configure_bridge(struct eeh_pe *pe) { int config_addr; int ret; + /* Waiting 0.2s maximum before skipping configuration */ + int max_wait = 200; /* Figure out the PE address */ config_addr = pe->config_addr; if (pe->addr) config_addr = pe->addr; - /* Use new configure-pe function, if supported */ - if (ibm_configure_pe != RTAS_UNKNOWN_SERVICE) { - ret = rtas_call(ibm_configure_pe, 3, 1, NULL, - config_addr, BUID_HI(pe->phb->buid), - BUID_LO(pe->phb->buid)); - } else if (ibm_configure_bridge != RTAS_UNKNOWN_SERVICE) { - ret = rtas_call(ibm_configure_bridge, 3, 1, NULL, - config_addr, BUID_HI(pe->phb->buid), - BUID_LO(pe->phb->buid)); - } else { - return -EFAULT; + while (max_wait > 0) { + /* Use new configure-pe function, if supported */ + if (ibm_configure_pe != RTAS_UNKNOWN_SERVICE) { + ret = rtas_call(ibm_configure_pe, 3, 1, NULL, + config_addr, BUID_HI(pe->phb->buid), + BUID_LO(pe->phb->buid)); + } else if (ibm_configure_bridge != RTAS_UNKNOWN_SERVICE) { + ret = rtas_call(ibm_configure_bridge, 3, 1, NULL, + config_addr, BUID_HI(pe->phb->buid), + BUID_LO(pe->phb->buid)); + } else { + return -EFAULT; + } + + if (!ret) + return ret; + + /* + * If RTAS returns a delay value that's above 100ms, cut it + * down to 100ms in case firmware made a mistake. For more + * on how these delay values work see rtas_busy_delay_time + */ + if (ret > RTAS_EXTENDED_DELAY_MIN+2 && + ret <= RTAS_EXTENDED_DELAY_MAX) + ret = RTAS_EXTENDED_DELAY_MIN+2; + + max_wait -= rtas_busy_delay_time(ret); + + if (max_wait < 0) + break; + + rtas_busy_delay(ret); } - if (ret) - pr_warn("%s: Unable to configure bridge PHB#%d-PE#%x (%d)\n", - __func__, pe->phb->global_number, pe->addr, ret); - + pr_warn("%s: Unable to configure bridge PHB#%d-PE#%x (%d)\n", + __func__, pe->phb->global_number, pe->addr, ret); return ret; } From bd000b82e86503d5e8b9e6d40a3257bc9dddb96d Mon Sep 17 00:00:00 2001 From: Russell Currey Date: Thu, 7 Apr 2016 16:28:27 +1000 Subject: [PATCH 056/223] powerpc/pseries/eeh: Refactor the configure_bridge RTAS tokens The RTAS calls "ibm,configure-pe" and "ibm,configure-bridge" perform the same actions, however the former can skip configuration if unnecessary. The existing code treats them as different tokens even though only one will ever be called. Refactor this by making a single token that is assigned during init. Signed-off-by: Russell Currey Acked-by: Gavin Shan Signed-off-by: Michael Ellerman --- arch/powerpc/platforms/pseries/eeh_pseries.c | 28 +++++++++----------- 1 file changed, 12 insertions(+), 16 deletions(-) diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c index 405baaf96864..3998e0f9a03b 100644 --- a/arch/powerpc/platforms/pseries/eeh_pseries.c +++ b/arch/powerpc/platforms/pseries/eeh_pseries.c @@ -53,7 +53,6 @@ static int ibm_read_slot_reset_state2; static int ibm_slot_error_detail; static int ibm_get_config_addr_info; static int ibm_get_config_addr_info2; -static int ibm_configure_bridge; static int ibm_configure_pe; /* @@ -81,7 +80,14 @@ static int pseries_eeh_init(void) ibm_get_config_addr_info2 = rtas_token("ibm,get-config-addr-info2"); ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info"); ibm_configure_pe = rtas_token("ibm,configure-pe"); - ibm_configure_bridge = rtas_token("ibm,configure-bridge"); + + /* + * ibm,configure-pe and ibm,configure-bridge have the same semantics, + * however ibm,configure-pe can be faster. If we can't find + * ibm,configure-pe then fall back to using ibm,configure-bridge. + */ + if (ibm_configure_pe == RTAS_UNKNOWN_SERVICE) + ibm_configure_pe = rtas_token("ibm,configure-bridge"); /* * Necessary sanity check. We needn't check "get-config-addr-info" @@ -93,8 +99,7 @@ static int pseries_eeh_init(void) (ibm_read_slot_reset_state2 == RTAS_UNKNOWN_SERVICE && ibm_read_slot_reset_state == RTAS_UNKNOWN_SERVICE) || ibm_slot_error_detail == RTAS_UNKNOWN_SERVICE || - (ibm_configure_pe == RTAS_UNKNOWN_SERVICE && - ibm_configure_bridge == RTAS_UNKNOWN_SERVICE)) { + ibm_configure_pe == RTAS_UNKNOWN_SERVICE) { pr_info("EEH functionality not supported\n"); return -EINVAL; } @@ -624,18 +629,9 @@ static int pseries_eeh_configure_bridge(struct eeh_pe *pe) config_addr = pe->addr; while (max_wait > 0) { - /* Use new configure-pe function, if supported */ - if (ibm_configure_pe != RTAS_UNKNOWN_SERVICE) { - ret = rtas_call(ibm_configure_pe, 3, 1, NULL, - config_addr, BUID_HI(pe->phb->buid), - BUID_LO(pe->phb->buid)); - } else if (ibm_configure_bridge != RTAS_UNKNOWN_SERVICE) { - ret = rtas_call(ibm_configure_bridge, 3, 1, NULL, - config_addr, BUID_HI(pe->phb->buid), - BUID_LO(pe->phb->buid)); - } else { - return -EFAULT; - } + ret = rtas_call(ibm_configure_pe, 3, 1, NULL, + config_addr, BUID_HI(pe->phb->buid), + BUID_LO(pe->phb->buid)); if (!ret) return ret; From 9791d8e7627d1c4dbf8819646833f2f576b4f8f3 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 25 May 2016 16:50:45 +0200 Subject: [PATCH 057/223] ipv6: hide ip6_encap_hlen/ip6_tnl_encap definitions A recent cleanup moved MAX_IPTUN_ENCAP_OPS along with some other definitions, but it is now invisible when CONFIG_INET is not defined, but still referenced from ip6_tunnel.h: In file included from net/xfrm/xfrm_input.c:17:0: include/net/ip6_tunnel.h:67:17: error: 'MAX_IPTUN_ENCAP_OPS' undeclared here (not in a function) ip6tun_encaps[MAX_IPTUN_ENCAP_OPS]; ^~~~~~~~~~~~~~~~~~~ This hides the ip6_encap_hlen and ip6_tnl_encap functions inside of CONFIG_INET so we don't run into the the problem. Alternatively we could move the macro out of the #ifdef again to restore the previous behavior Signed-off-by: Arnd Bergmann Fixes: 55c2bc143224 ("net: Cleanup encap items in ip_tunnels.h") Signed-off-by: David S. Miller --- include/net/ip6_tunnel.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/net/ip6_tunnel.h b/include/net/ip6_tunnel.h index d325c81332e3..43a5a0e4524c 100644 --- a/include/net/ip6_tunnel.h +++ b/include/net/ip6_tunnel.h @@ -63,6 +63,8 @@ struct ip6_tnl_encap_ops { u8 *protocol, struct flowi6 *fl6); }; +#ifdef CONFIG_INET + extern const struct ip6_tnl_encap_ops __rcu * ip6tun_encaps[MAX_IPTUN_ENCAP_OPS]; @@ -138,7 +140,6 @@ struct net *ip6_tnl_get_link_net(const struct net_device *dev); int ip6_tnl_get_iflink(const struct net_device *dev); int ip6_tnl_change_mtu(struct net_device *dev, int new_mtu); -#ifdef CONFIG_INET static inline void ip6tunnel_xmit(struct sock *sk, struct sk_buff *skb, struct net_device *dev) { From fabb13db448efc23c47851550867fc46519de97e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 25 May 2016 16:50:46 +0200 Subject: [PATCH 058/223] fou: add Kconfig options for IPv6 support A previous patch added the fou6.ko module, but that failed to link in a couple of configurations: net/built-in.o: In function `ip6_tnl_encap_add_fou_ops': net/ipv6/fou6.c:88: undefined reference to `ip6_tnl_encap_add_ops' net/ipv6/fou6.c:94: undefined reference to `ip6_tnl_encap_add_ops' net/ipv6/fou6.c:97: undefined reference to `ip6_tnl_encap_del_ops' net/built-in.o: In function `ip6_tnl_encap_del_fou_ops': net/ipv6/fou6.c:106: undefined reference to `ip6_tnl_encap_del_ops' net/ipv6/fou6.c:107: undefined reference to `ip6_tnl_encap_del_ops' If CONFIG_IPV6=m, ip6_tnl_encap_add_ops/ip6_tnl_encap_del_ops are in a module, but fou6.c can still be built-in, and that obviously fails to link. Also, if CONFIG_IPV6=y, but CONFIG_IPV6_TUNNEL=m or CONFIG_IPV6_TUNNEL=n, the same problem happens for a different reason. This adds two new silent Kconfig symbols to work around both problems: - CONFIG_IPV6_FOU is now always set to 'm' if either CONFIG_NET_FOU=m or CONFIG_IPV6=m - CONFIG_IPV6_FOU_TUNNEL is set implicitly when IPV6_FOU is enabled and NET_FOU_IP_TUNNELS is also turned out, and it will ensure that CONFIG_IPV6_TUNNEL is also available. The options could be made user-visible as well, to give additional room for configuration, but it seems easier not to bother users with more choice here. Signed-off-by: Arnd Bergmann Fixes: aa3463d65e7b ("fou: Add encap ops for IPv6 tunnels") Signed-off-by: David S. Miller --- net/ipv6/Kconfig | 9 +++++++++ net/ipv6/Makefile | 2 +- net/ipv6/fou6.c | 2 +- 3 files changed, 11 insertions(+), 2 deletions(-) diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig index 3f8411328de5..994608263260 100644 --- a/net/ipv6/Kconfig +++ b/net/ipv6/Kconfig @@ -232,6 +232,15 @@ config IPV6_GRE Saying M here will produce a module called ip6_gre. If unsure, say N. +config IPV6_FOU + tristate + default NET_FOU && IPV6 + +config IPV6_FOU_TUNNEL + tristate + default NET_FOU_IP_TUNNELS && IPV6_FOU + select INET6_TUNNEL + config IPV6_MULTIPLE_TABLES bool "IPv6: Multiple Routing Tables" select FIB_RULES diff --git a/net/ipv6/Makefile b/net/ipv6/Makefile index 7ec3129c9ace..d42ca3d1197f 100644 --- a/net/ipv6/Makefile +++ b/net/ipv6/Makefile @@ -42,7 +42,7 @@ obj-$(CONFIG_IPV6_VTI) += ip6_vti.o obj-$(CONFIG_IPV6_SIT) += sit.o obj-$(CONFIG_IPV6_TUNNEL) += ip6_tunnel.o obj-$(CONFIG_IPV6_GRE) += ip6_gre.o -obj-$(CONFIG_NET_FOU) += fou6.o +obj-$(CONFIG_NET_FOU_IPV6_TUNNELS) += fou6.o obj-y += addrconf_core.o exthdrs_core.o ip6_checksum.o ip6_icmp.o obj-$(CONFIG_INET) += output_core.o protocol.o $(ipv6-offload) diff --git a/net/ipv6/fou6.c b/net/ipv6/fou6.c index c972d0b52579..9ea249b9451e 100644 --- a/net/ipv6/fou6.c +++ b/net/ipv6/fou6.c @@ -69,7 +69,7 @@ int gue6_build_header(struct sk_buff *skb, struct ip_tunnel_encap *e, } EXPORT_SYMBOL(gue6_build_header); -#ifdef CONFIG_NET_FOU_IP_TUNNELS +#if IS_ENABLED(CONFIG_IPV6_FOU_TUNNEL) static const struct ip6_tnl_encap_ops fou_ip6tun_ops = { .encap_hlen = fou_encap_hlen, From 6756325a9a1e2d36b6210f4a42f77501c917ebb9 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 26 May 2016 09:46:22 +0300 Subject: [PATCH 059/223] ptp: oops in ptp_ioctl() If we pass ERR_PTR(-EFAULT) to kfree() then it's going to oops. Fixes: 2ece068e1b1d ('ptp: use memdup_user().') Signed-off-by: Dan Carpenter Acked-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/ptp/ptp_chardev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ptp/ptp_chardev.c b/drivers/ptp/ptp_chardev.c index 0b1ac6be69ce..d637c933c8a9 100644 --- a/drivers/ptp/ptp_chardev.c +++ b/drivers/ptp/ptp_chardev.c @@ -211,6 +211,7 @@ long ptp_ioctl(struct posix_clock *pc, unsigned int cmd, unsigned long arg) sysoff = memdup_user((void __user *)arg, sizeof(*sysoff)); if (IS_ERR(sysoff)) { err = PTR_ERR(sysoff); + sysoff = NULL; break; } if (sysoff->n_samples > PTP_MAX_SAMPLES) { From 0d08df6c493898e679d9c517e77ea95c063d40ec Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 26 May 2016 14:43:52 +0300 Subject: [PATCH 060/223] net/lapb: tuse %*ph to dump buffers Use %*ph specifier to dump small buffers in hex format instead doing this byte-by-byte. Signed-off-by: Andy Shevchenko Signed-off-by: David S. Miller --- net/lapb/lapb_in.c | 5 ++--- net/lapb/lapb_out.c | 4 +--- net/lapb/lapb_subr.c | 14 +++++--------- 3 files changed, 8 insertions(+), 15 deletions(-) diff --git a/net/lapb/lapb_in.c b/net/lapb/lapb_in.c index 5dba899131b3..182470847fcf 100644 --- a/net/lapb/lapb_in.c +++ b/net/lapb/lapb_in.c @@ -444,10 +444,9 @@ static void lapb_state3_machine(struct lapb_cb *lapb, struct sk_buff *skb, break; case LAPB_FRMR: - lapb_dbg(1, "(%p) S3 RX FRMR(%d) %02X %02X %02X %02X %02X\n", + lapb_dbg(1, "(%p) S3 RX FRMR(%d) %5ph\n", lapb->dev, frame->pf, - skb->data[0], skb->data[1], skb->data[2], - skb->data[3], skb->data[4]); + skb->data); lapb_establish_data_link(lapb); lapb_dbg(0, "(%p) S3 -> S1\n", lapb->dev); lapb_requeue_frames(lapb); diff --git a/net/lapb/lapb_out.c b/net/lapb/lapb_out.c index ba4d015bd1a6..482c94d9d958 100644 --- a/net/lapb/lapb_out.c +++ b/net/lapb/lapb_out.c @@ -148,9 +148,7 @@ void lapb_transmit_buffer(struct lapb_cb *lapb, struct sk_buff *skb, int type) } } - lapb_dbg(2, "(%p) S%d TX %02X %02X %02X\n", - lapb->dev, lapb->state, - skb->data[0], skb->data[1], skb->data[2]); + lapb_dbg(2, "(%p) S%d TX %3ph\n", lapb->dev, lapb->state, skb->data); if (!lapb_data_transmit(lapb, skb)) kfree_skb(skb); diff --git a/net/lapb/lapb_subr.c b/net/lapb/lapb_subr.c index 9d0a426eccbb..3c1914df641f 100644 --- a/net/lapb/lapb_subr.c +++ b/net/lapb/lapb_subr.c @@ -113,9 +113,7 @@ int lapb_decode(struct lapb_cb *lapb, struct sk_buff *skb, { frame->type = LAPB_ILLEGAL; - lapb_dbg(2, "(%p) S%d RX %02X %02X %02X\n", - lapb->dev, lapb->state, - skb->data[0], skb->data[1], skb->data[2]); + lapb_dbg(2, "(%p) S%d RX %3ph\n", lapb->dev, lapb->state, skb->data); /* We always need to look at 2 bytes, sometimes we need * to look at 3 and those cases are handled below. @@ -284,10 +282,9 @@ void lapb_transmit_frmr(struct lapb_cb *lapb) dptr++; *dptr++ = lapb->frmr_type; - lapb_dbg(1, "(%p) S%d TX FRMR %02X %02X %02X %02X %02X\n", + lapb_dbg(1, "(%p) S%d TX FRMR %5ph\n", lapb->dev, lapb->state, - skb->data[1], skb->data[2], skb->data[3], - skb->data[4], skb->data[5]); + &skb->data[1]); } else { dptr = skb_put(skb, 4); *dptr++ = LAPB_FRMR; @@ -299,9 +296,8 @@ void lapb_transmit_frmr(struct lapb_cb *lapb) dptr++; *dptr++ = lapb->frmr_type; - lapb_dbg(1, "(%p) S%d TX FRMR %02X %02X %02X\n", - lapb->dev, lapb->state, skb->data[1], - skb->data[2], skb->data[3]); + lapb_dbg(1, "(%p) S%d TX FRMR %3ph\n", + lapb->dev, lapb->state, &skb->data[1]); } lapb_transmit_buffer(lapb, skb, LAPB_RESPONSE); From 86651650d16a359e4142c6a8b0467c87e48c4c94 Mon Sep 17 00:00:00 2001 From: Elad Kanfi Date: Thu, 26 May 2016 15:00:06 +0300 Subject: [PATCH 061/223] net: nps_enet: Disable interrupts before napi reschedule Since NAPI works by shutting down event interrupts when theres work and turning them on when theres none, the net driver must make sure that interrupts are disabled when it reschedules polling. By calling napi_reschedule, the driver switches to polling mode, therefor there should be no interrupt interference. Any received packets will be handled in nps_enet_poll by polling the HW indication of received packet until all packets are handled. Signed-off-by: Elad Kanfi Acked-by: Noam Camus Tested-by: Alexey Brodkin Signed-off-by: David S. Miller --- drivers/net/ethernet/ezchip/nps_enet.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ezchip/nps_enet.c b/drivers/net/ethernet/ezchip/nps_enet.c index 085f9125cf42..06f031715b57 100644 --- a/drivers/net/ethernet/ezchip/nps_enet.c +++ b/drivers/net/ethernet/ezchip/nps_enet.c @@ -205,8 +205,10 @@ static int nps_enet_poll(struct napi_struct *napi, int budget) * re-adding ourselves to the poll list. */ - if (priv->tx_skb && !tx_ctrl_ct) + if (priv->tx_skb && !tx_ctrl_ct) { + nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE, 0); napi_reschedule(napi); + } } return work_done; From 421eeea10d0a5e52256bce9544de477938104fdb Mon Sep 17 00:00:00 2001 From: Baozeng Ding Date: Thu, 26 May 2016 21:07:42 +0800 Subject: [PATCH 062/223] ieee802154: fix logic error in ieee802154_llsec_parse_dev_addr Fix a logic error to avoid potential null pointer dereference. Signed-off-by: Baozeng Ding Reviewed-by: Stefan Schmidt Signed-off-by: David S. Miller --- net/ieee802154/nl802154.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ieee802154/nl802154.c b/net/ieee802154/nl802154.c index ca207dbf673b..116187b5c267 100644 --- a/net/ieee802154/nl802154.c +++ b/net/ieee802154/nl802154.c @@ -1289,8 +1289,8 @@ ieee802154_llsec_parse_dev_addr(struct nlattr *nla, nl802154_dev_addr_policy)) return -EINVAL; - if (!attrs[NL802154_DEV_ADDR_ATTR_PAN_ID] && - !attrs[NL802154_DEV_ADDR_ATTR_MODE] && + if (!attrs[NL802154_DEV_ADDR_ATTR_PAN_ID] || + !attrs[NL802154_DEV_ADDR_ATTR_MODE] || !(attrs[NL802154_DEV_ADDR_ATTR_SHORT] || attrs[NL802154_DEV_ADDR_ATTR_EXTENDED])) return -EINVAL; From 68bb399e656f244d3d173a20a8280c167632fca8 Mon Sep 17 00:00:00 2001 From: Edward Cree Date: Thu, 26 May 2016 21:46:05 +0100 Subject: [PATCH 063/223] sfc: use flow dissector helpers for aRFS Signed-off-by: Edward Cree Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/rx.c | 73 ++++++++++------------------------- 1 file changed, 20 insertions(+), 53 deletions(-) diff --git a/drivers/net/ethernet/sfc/rx.c b/drivers/net/ethernet/sfc/rx.c index 8956995b2fe7..9d6cc8b92ba0 100644 --- a/drivers/net/ethernet/sfc/rx.c +++ b/drivers/net/ethernet/sfc/rx.c @@ -842,33 +842,15 @@ int efx_filter_rfs(struct net_device *net_dev, const struct sk_buff *skb, struct efx_nic *efx = netdev_priv(net_dev); struct efx_channel *channel; struct efx_filter_spec spec; - const __be16 *ports; - __be16 ether_type; - int nhoff; + struct flow_keys fk; int rc; - /* The core RPS/RFS code has already parsed and validated - * VLAN, IP and transport headers. We assume they are in the - * header area. - */ + if (!skb_flow_dissect_flow_keys(skb, &fk, 0)) + return -EPROTONOSUPPORT; - if (skb->protocol == htons(ETH_P_8021Q)) { - const struct vlan_hdr *vh = - (const struct vlan_hdr *)skb->data; - - /* We can't filter on the IP 5-tuple and the vlan - * together, so just strip the vlan header and filter - * on the IP part. - */ - EFX_BUG_ON_PARANOID(skb_headlen(skb) < sizeof(*vh)); - ether_type = vh->h_vlan_encapsulated_proto; - nhoff = sizeof(struct vlan_hdr); - } else { - ether_type = skb->protocol; - nhoff = 0; - } - - if (ether_type != htons(ETH_P_IP) && ether_type != htons(ETH_P_IPV6)) + if (fk.basic.n_proto != htons(ETH_P_IP) && fk.basic.n_proto != htons(ETH_P_IPV6)) + return -EPROTONOSUPPORT; + if (fk.control.flags & FLOW_DIS_IS_FRAGMENT) return -EPROTONOSUPPORT; efx_filter_init_rx(&spec, EFX_FILTER_PRI_HINT, @@ -878,34 +860,19 @@ int efx_filter_rfs(struct net_device *net_dev, const struct sk_buff *skb, EFX_FILTER_MATCH_ETHER_TYPE | EFX_FILTER_MATCH_IP_PROTO | EFX_FILTER_MATCH_LOC_HOST | EFX_FILTER_MATCH_LOC_PORT | EFX_FILTER_MATCH_REM_HOST | EFX_FILTER_MATCH_REM_PORT; - spec.ether_type = ether_type; + spec.ether_type = fk.basic.n_proto; + spec.ip_proto = fk.basic.ip_proto; - if (ether_type == htons(ETH_P_IP)) { - const struct iphdr *ip = - (const struct iphdr *)(skb->data + nhoff); - - EFX_BUG_ON_PARANOID(skb_headlen(skb) < nhoff + sizeof(*ip)); - if (ip_is_fragment(ip)) - return -EPROTONOSUPPORT; - spec.ip_proto = ip->protocol; - spec.rem_host[0] = ip->saddr; - spec.loc_host[0] = ip->daddr; - EFX_BUG_ON_PARANOID(skb_headlen(skb) < nhoff + 4 * ip->ihl + 4); - ports = (const __be16 *)(skb->data + nhoff + 4 * ip->ihl); + if (fk.basic.n_proto == htons(ETH_P_IP)) { + spec.rem_host[0] = fk.addrs.v4addrs.src; + spec.loc_host[0] = fk.addrs.v4addrs.dst; } else { - const struct ipv6hdr *ip6 = - (const struct ipv6hdr *)(skb->data + nhoff); - - EFX_BUG_ON_PARANOID(skb_headlen(skb) < - nhoff + sizeof(*ip6) + 4); - spec.ip_proto = ip6->nexthdr; - memcpy(spec.rem_host, &ip6->saddr, sizeof(ip6->saddr)); - memcpy(spec.loc_host, &ip6->daddr, sizeof(ip6->daddr)); - ports = (const __be16 *)(ip6 + 1); + memcpy(spec.rem_host, &fk.addrs.v6addrs.src, sizeof(struct in6_addr)); + memcpy(spec.loc_host, &fk.addrs.v6addrs.dst, sizeof(struct in6_addr)); } - spec.rem_port = ports[0]; - spec.loc_port = ports[1]; + spec.rem_port = fk.ports.src; + spec.loc_port = fk.ports.dst; rc = efx->type->filter_rfs_insert(efx, &spec); if (rc < 0) @@ -916,18 +883,18 @@ int efx_filter_rfs(struct net_device *net_dev, const struct sk_buff *skb, channel = efx_get_channel(efx, skb_get_rx_queue(skb)); ++channel->rfs_filters_added; - if (ether_type == htons(ETH_P_IP)) + if (spec.ether_type == htons(ETH_P_IP)) netif_info(efx, rx_status, efx->net_dev, "steering %s %pI4:%u:%pI4:%u to queue %u [flow %u filter %d]\n", (spec.ip_proto == IPPROTO_TCP) ? "TCP" : "UDP", - spec.rem_host, ntohs(ports[0]), spec.loc_host, - ntohs(ports[1]), rxq_index, flow_id, rc); + spec.rem_host, ntohs(spec.rem_port), spec.loc_host, + ntohs(spec.loc_port), rxq_index, flow_id, rc); else netif_info(efx, rx_status, efx->net_dev, "steering %s [%pI6]:%u:[%pI6]:%u to queue %u [flow %u filter %d]\n", (spec.ip_proto == IPPROTO_TCP) ? "TCP" : "UDP", - spec.rem_host, ntohs(ports[0]), spec.loc_host, - ntohs(ports[1]), rxq_index, flow_id, rc); + spec.rem_host, ntohs(spec.rem_port), spec.loc_host, + ntohs(spec.loc_port), rxq_index, flow_id, rc); return rc; } From 176b346b37f0b9c03e91eb6f1460e00f3c0c3edf Mon Sep 17 00:00:00 2001 From: Eric Garver Date: Thu, 26 May 2016 12:28:05 -0400 Subject: [PATCH 064/223] Documentation: ip-sysctl.txt: clarify secure_redirects Clarify how secure_redirects works. Mention that RFC1122 always applies. Signed-off-by: Eric Garver Signed-off-by: David S. Miller --- Documentation/networking/ip-sysctl.txt | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 6c7f365b1515..9ae929395b24 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -1036,15 +1036,17 @@ proxy_arp_pvlan - BOOLEAN shared_media - BOOLEAN Send(router) or accept(host) RFC1620 shared media redirects. - Overrides ip_secure_redirects. + Overrides secure_redirects. shared_media for the interface will be enabled if at least one of conf/{all,interface}/shared_media is set to TRUE, it will be disabled otherwise default TRUE secure_redirects - BOOLEAN - Accept ICMP redirect messages only for gateways, - listed in default gateway list. + Accept ICMP redirect messages only to gateways listed in the + interface's current gateway list. Even if disabled, RFC1122 redirect + rules still apply. + Overridden by shared_media. secure_redirects for the interface will be enabled if at least one of conf/{all,interface}/secure_redirects is set to TRUE, it will be disabled otherwise From 0e6b5259824e97a0f7e7b450421ff12865d3b0e2 Mon Sep 17 00:00:00 2001 From: Shmulik Ladkani Date: Thu, 26 May 2016 20:16:36 +0300 Subject: [PATCH 065/223] net: l2tp: Make l2tp_ip6 namespace aware l2tp_ip6 tunnel and session lookups were still using init_net, although the l2tp core infrastructure already supports lookups keyed by 'net'. As a result, l2tp_ip6_recv discarded packets for tunnels/sessions created in namespaces other than the init_net. Fix, by using dev_net(skb->dev) or sock_net(sk) where appropriate. Signed-off-by: Shmulik Ladkani Signed-off-by: David S. Miller --- net/l2tp/l2tp_ip6.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/net/l2tp/l2tp_ip6.c b/net/l2tp/l2tp_ip6.c index c6f5df1bed12..6c54e03fe9c1 100644 --- a/net/l2tp/l2tp_ip6.c +++ b/net/l2tp/l2tp_ip6.c @@ -128,6 +128,7 @@ static inline struct sock *l2tp_ip6_bind_lookup(struct net *net, */ static int l2tp_ip6_recv(struct sk_buff *skb) { + struct net *net = dev_net(skb->dev); struct sock *sk; u32 session_id; u32 tunnel_id; @@ -154,7 +155,7 @@ static int l2tp_ip6_recv(struct sk_buff *skb) } /* Ok, this is a data packet. Lookup the session. */ - session = l2tp_session_find(&init_net, NULL, session_id); + session = l2tp_session_find(net, NULL, session_id); if (session == NULL) goto discard; @@ -188,14 +189,14 @@ pass_up: goto discard; tunnel_id = ntohl(*(__be32 *) &skb->data[4]); - tunnel = l2tp_tunnel_find(&init_net, tunnel_id); + tunnel = l2tp_tunnel_find(net, tunnel_id); if (tunnel != NULL) sk = tunnel->sock; else { struct ipv6hdr *iph = ipv6_hdr(skb); read_lock_bh(&l2tp_ip6_lock); - sk = __l2tp_ip6_bind_lookup(&init_net, &iph->daddr, + sk = __l2tp_ip6_bind_lookup(net, &iph->daddr, 0, tunnel_id); read_unlock_bh(&l2tp_ip6_lock); } @@ -263,6 +264,7 @@ static int l2tp_ip6_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len) struct inet_sock *inet = inet_sk(sk); struct ipv6_pinfo *np = inet6_sk(sk); struct sockaddr_l2tpip6 *addr = (struct sockaddr_l2tpip6 *) uaddr; + struct net *net = sock_net(sk); __be32 v4addr = 0; int addr_type; int err; @@ -286,7 +288,7 @@ static int l2tp_ip6_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len) err = -EADDRINUSE; read_lock_bh(&l2tp_ip6_lock); - if (__l2tp_ip6_bind_lookup(&init_net, &addr->l2tp_addr, + if (__l2tp_ip6_bind_lookup(net, &addr->l2tp_addr, sk->sk_bound_dev_if, addr->l2tp_conn_id)) goto out_in_use; read_unlock_bh(&l2tp_ip6_lock); @@ -456,7 +458,7 @@ static int l2tp_ip6_backlog_recv(struct sock *sk, struct sk_buff *skb) return 0; drop: - IP_INC_STATS(&init_net, IPSTATS_MIB_INDISCARDS); + IP_INC_STATS(sock_net(sk), IPSTATS_MIB_INDISCARDS); kfree_skb(skb); return -1; } From a6d206e28abe468aac5bb589669c6beb855b1a66 Mon Sep 17 00:00:00 2001 From: Steve Longerbeam Date: Wed, 27 Apr 2016 16:23:33 -0400 Subject: [PATCH 066/223] drm/imx: imx-ldb: Add DDC support Add support for reading EDID over Display Data Channel. If no DDC adapter is available, falls back to hardcoded EDID or display-timings node as before. Signed-off-by: Steve Longerbeam Signed-off-by: Akshay Bhat Acked-by: Philipp Zabel Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/imx-ldb.c | 42 ++++++++++++++++++++++++++++------- 1 file changed, 34 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c index a58eee59550a..f506e8dd76cb 100644 --- a/drivers/gpu/drm/imx/imx-ldb.c +++ b/drivers/gpu/drm/imx/imx-ldb.c @@ -59,6 +59,7 @@ struct imx_ldb_channel { struct drm_encoder encoder; struct drm_panel *panel; struct device_node *child; + struct i2c_adapter *ddc; int chno; void *edid; int edid_len; @@ -107,6 +108,9 @@ static int imx_ldb_connector_get_modes(struct drm_connector *connector) return num_modes; } + if (!imx_ldb_ch->edid && imx_ldb_ch->ddc) + imx_ldb_ch->edid = drm_get_edid(connector, imx_ldb_ch->ddc); + if (imx_ldb_ch->edid) { drm_mode_connector_update_edid_property(connector, imx_ldb_ch->edid); @@ -553,6 +557,7 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) for_each_child_of_node(np, child) { struct imx_ldb_channel *channel; + struct device_node *ddc_node; struct device_node *port; ret = of_property_read_u32(child, "reg", &i); @@ -595,14 +600,34 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) } } - edidp = of_get_property(child, "edid", &channel->edid_len); - if (edidp) { - channel->edid = kmemdup(edidp, channel->edid_len, - GFP_KERNEL); - } else if (!channel->panel) { - ret = of_get_drm_display_mode(child, &channel->mode, 0); - if (!ret) - channel->mode_valid = 1; + ddc_node = of_parse_phandle(child, "ddc-i2c-bus", 0); + if (ddc_node) { + channel->ddc = of_find_i2c_adapter_by_node(ddc_node); + of_node_put(ddc_node); + if (!channel->ddc) { + dev_warn(dev, "failed to get ddc i2c adapter\n"); + return -EPROBE_DEFER; + } + } + + if (!channel->ddc) { + /* if no DDC available, fallback to hardcoded EDID */ + dev_dbg(dev, "no ddc available\n"); + + edidp = of_get_property(child, "edid", + &channel->edid_len); + if (edidp) { + channel->edid = kmemdup(edidp, + channel->edid_len, + GFP_KERNEL); + } else if (!channel->panel) { + /* fallback to display-timings node */ + ret = of_get_drm_display_mode(child, + &channel->mode, + 0); + if (!ret) + channel->mode_valid = 1; + } } channel->bus_format = of_get_bus_format(dev, child); @@ -647,6 +672,7 @@ static void imx_ldb_unbind(struct device *dev, struct device *master, channel->encoder.funcs->destroy(&channel->encoder); kfree(channel->edid); + i2c_put_adapter(channel->ddc); } } From ee89686631174fa576e61400ac3580722edac120 Mon Sep 17 00:00:00 2001 From: Akshay Bhat Date: Wed, 27 Apr 2016 16:23:34 -0400 Subject: [PATCH 067/223] dt-bindings: imx: ldb: Add ddc-i2c-bus property Document the ddc-i2c-bus property used by imx-ldb driver to read EDID information via I2C interface. Signed-off-by: Akshay Bhat Acked-by: Rob Herring Signed-off-by: Philipp Zabel --- Documentation/devicetree/bindings/display/imx/ldb.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/display/imx/ldb.txt b/Documentation/devicetree/bindings/display/imx/ldb.txt index 0a175d991b52..a407462c885e 100644 --- a/Documentation/devicetree/bindings/display/imx/ldb.txt +++ b/Documentation/devicetree/bindings/display/imx/ldb.txt @@ -62,6 +62,7 @@ Required properties: display-timings are used instead. Optional properties (required if display-timings are used): + - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing - display-timings : A node that describes the display timings as defined in Documentation/devicetree/bindings/display/display-timing.txt. - fsl,data-mapping : should be "spwg" or "jeida" From 620011e0477e485fc6112ace3c0a772130e8fd4f Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 3 May 2016 14:37:13 +0200 Subject: [PATCH 068/223] drm/imx: imx-ldb: use of_graph_get_endpoint_by_regs helper Instead of using of_graph_get_port_by_id() to get the port and then of_get_child_by_name() to get the first endpoint, get to the endpoint in a single step. Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/imx-ldb.c | 33 +++++++++++++++++---------------- 1 file changed, 17 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c index f506e8dd76cb..5f8f0bf45a62 100644 --- a/drivers/gpu/drm/imx/imx-ldb.c +++ b/drivers/gpu/drm/imx/imx-ldb.c @@ -558,7 +558,7 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) for_each_child_of_node(np, child) { struct imx_ldb_channel *channel; struct device_node *ddc_node; - struct device_node *port; + struct device_node *ep; ret = of_property_read_u32(child, "reg", &i); if (ret || i < 0 || i > 1) @@ -581,22 +581,23 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) * The output port is port@4 with an external 4-port mux or * port@2 with the internal 2-port mux. */ - port = of_graph_get_port_by_id(child, imx_ldb->lvds_mux ? 4 : 2); - if (port) { - struct device_node *endpoint, *remote; + ep = of_graph_get_endpoint_by_regs(child, + imx_ldb->lvds_mux ? 4 : 2, + -1); + if (ep) { + struct device_node *remote; - endpoint = of_get_child_by_name(port, "endpoint"); - if (endpoint) { - remote = of_graph_get_remote_port_parent(endpoint); - if (remote) - channel->panel = of_drm_find_panel(remote); - else - return -EPROBE_DEFER; - if (!channel->panel) { - dev_err(dev, "panel not found: %s\n", - remote->full_name); - return -EPROBE_DEFER; - } + remote = of_graph_get_remote_port_parent(ep); + of_node_put(ep); + if (remote) + channel->panel = of_drm_find_panel(remote); + else + return -EPROBE_DEFER; + of_node_put(remote); + if (!channel->panel) { + dev_err(dev, "panel not found: %s\n", + remote->full_name); + return -EPROBE_DEFER; } } From 3a1c117f8bf13435f6db78f294d5754b2eb6185b Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 3 May 2016 14:39:29 +0200 Subject: [PATCH 069/223] drm/imx: parallel-display: use of_graph_get_endpoint_by_regs helper Instead of using of_graph_get_port_by_id() to get the port and then of_get_child_by_name() to get the first endpoint, get to the endpoint in a single step. Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/parallel-display.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/imx/parallel-display.c b/drivers/gpu/drm/imx/parallel-display.c index 363e2c7741e2..27755ecbf516 100644 --- a/drivers/gpu/drm/imx/parallel-display.c +++ b/drivers/gpu/drm/imx/parallel-display.c @@ -203,7 +203,7 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data) { struct drm_device *drm = data; struct device_node *np = dev->of_node; - struct device_node *port; + struct device_node *ep; const u8 *edidp; struct imx_parallel_display *imxpd; int ret; @@ -230,18 +230,18 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data) } /* port@1 is the output port */ - port = of_graph_get_port_by_id(np, 1); - if (port) { - struct device_node *endpoint, *remote; + ep = of_graph_get_endpoint_by_regs(np, 1, -1); + if (ep) { + struct device_node *remote; - endpoint = of_get_child_by_name(port, "endpoint"); - if (endpoint) { - remote = of_graph_get_remote_port_parent(endpoint); - if (remote) - imxpd->panel = of_drm_find_panel(remote); - if (!imxpd->panel) - return -EPROBE_DEFER; + remote = of_graph_get_remote_port_parent(ep); + of_node_put(ep); + if (remote) { + imxpd->panel = of_drm_find_panel(remote); + of_node_put(remote); } + if (!imxpd->panel) + return -EPROBE_DEFER; } imxpd->dev = dev; From 7932131f6381e5d2d4a78d9134f5f6bf45900ae5 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Fri, 12 Feb 2016 14:35:55 +0100 Subject: [PATCH 070/223] drm/imx: ipuv3-plane: enable UYVY and VYUY formats Advertise the DRM_FORMAT_UYVY and DRM_FORMAT_VYUY formats to userspace. Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/ipuv3-plane.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c index 681ec6eb77d9..8c24df787884 100644 --- a/drivers/gpu/drm/imx/ipuv3-plane.c +++ b/drivers/gpu/drm/imx/ipuv3-plane.c @@ -38,6 +38,8 @@ static const uint32_t ipu_plane_formats[] = { DRM_FORMAT_RGBX8888, DRM_FORMAT_BGRA8888, DRM_FORMAT_BGRA8888, + DRM_FORMAT_UYVY, + DRM_FORMAT_VYUY, DRM_FORMAT_YUYV, DRM_FORMAT_YVYU, DRM_FORMAT_YUV420, From 4ed094fd73a7c0b8534685d2ed0f0f3ccdb96bdf Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Mon, 9 May 2016 17:02:13 +0200 Subject: [PATCH 071/223] drm/imx: use bus_flags for pixel clock polarity This patch allows panels to set pixel clock and data enable pin polarity other than the default of driving data at the falling pixel clock edge and active high display enable. Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/imx-drm-core.c | 13 ++++++++----- drivers/gpu/drm/imx/imx-drm.h | 7 ++++--- drivers/gpu/drm/imx/imx-tve.c | 6 ++++-- drivers/gpu/drm/imx/ipuv3-crtc.c | 10 +++++++--- drivers/gpu/drm/imx/parallel-display.c | 4 ++-- 5 files changed, 25 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/imx/imx-drm-core.c b/drivers/gpu/drm/imx/imx-drm-core.c index 1f14b602882b..82656654fb21 100644 --- a/drivers/gpu/drm/imx/imx-drm-core.c +++ b/drivers/gpu/drm/imx/imx-drm-core.c @@ -97,8 +97,8 @@ static struct imx_drm_crtc *imx_drm_find_crtc(struct drm_crtc *crtc) return NULL; } -int imx_drm_set_bus_format_pins(struct drm_encoder *encoder, u32 bus_format, - int hsync_pin, int vsync_pin) +int imx_drm_set_bus_config(struct drm_encoder *encoder, u32 bus_format, + int hsync_pin, int vsync_pin, u32 bus_flags) { struct imx_drm_crtc_helper_funcs *helper; struct imx_drm_crtc *imx_crtc; @@ -110,14 +110,17 @@ int imx_drm_set_bus_format_pins(struct drm_encoder *encoder, u32 bus_format, helper = &imx_crtc->imx_drm_helper_funcs; if (helper->set_interface_pix_fmt) return helper->set_interface_pix_fmt(encoder->crtc, - bus_format, hsync_pin, vsync_pin); + bus_format, hsync_pin, vsync_pin, + bus_flags); return 0; } -EXPORT_SYMBOL_GPL(imx_drm_set_bus_format_pins); +EXPORT_SYMBOL_GPL(imx_drm_set_bus_config); int imx_drm_set_bus_format(struct drm_encoder *encoder, u32 bus_format) { - return imx_drm_set_bus_format_pins(encoder, bus_format, 2, 3); + return imx_drm_set_bus_config(encoder, bus_format, 2, 3, + DRM_BUS_FLAG_DE_HIGH | + DRM_BUS_FLAG_PIXDATA_NEGEDGE); } EXPORT_SYMBOL_GPL(imx_drm_set_bus_format); diff --git a/drivers/gpu/drm/imx/imx-drm.h b/drivers/gpu/drm/imx/imx-drm.h index b0241b9d1334..74320a1723b7 100644 --- a/drivers/gpu/drm/imx/imx-drm.h +++ b/drivers/gpu/drm/imx/imx-drm.h @@ -19,7 +19,8 @@ struct imx_drm_crtc_helper_funcs { int (*enable_vblank)(struct drm_crtc *crtc); void (*disable_vblank)(struct drm_crtc *crtc); int (*set_interface_pix_fmt)(struct drm_crtc *crtc, - u32 bus_format, int hsync_pin, int vsync_pin); + u32 bus_format, int hsync_pin, int vsync_pin, + u32 bus_flags); const struct drm_crtc_helper_funcs *crtc_helper_funcs; const struct drm_crtc_funcs *crtc_funcs; }; @@ -41,8 +42,8 @@ void imx_drm_mode_config_init(struct drm_device *drm); struct drm_gem_cma_object *imx_drm_fb_get_obj(struct drm_framebuffer *fb); -int imx_drm_set_bus_format_pins(struct drm_encoder *encoder, - u32 bus_format, int hsync_pin, int vsync_pin); +int imx_drm_set_bus_config(struct drm_encoder *encoder, u32 bus_format, + int hsync_pin, int vsync_pin, u32 bus_flags); int imx_drm_set_bus_format(struct drm_encoder *encoder, u32 bus_format); diff --git a/drivers/gpu/drm/imx/imx-tve.c b/drivers/gpu/drm/imx/imx-tve.c index ae7a9fb3b8a2..baf788121287 100644 --- a/drivers/gpu/drm/imx/imx-tve.c +++ b/drivers/gpu/drm/imx/imx-tve.c @@ -294,8 +294,10 @@ static void imx_tve_encoder_prepare(struct drm_encoder *encoder) switch (tve->mode) { case TVE_MODE_VGA: - imx_drm_set_bus_format_pins(encoder, MEDIA_BUS_FMT_GBR888_1X24, - tve->hsync_pin, tve->vsync_pin); + imx_drm_set_bus_config(encoder, MEDIA_BUS_FMT_GBR888_1X24, + tve->hsync_pin, tve->vsync_pin, + DRM_BUS_FLAG_DE_HIGH | + DRM_BUS_FLAG_PIXDATA_NEGEDGE); break; case TVE_MODE_TVOUT: imx_drm_set_bus_format(encoder, MEDIA_BUS_FMT_YUV8_1X24); diff --git a/drivers/gpu/drm/imx/ipuv3-crtc.c b/drivers/gpu/drm/imx/ipuv3-crtc.c index b2c30b8d9816..fc040417e1e8 100644 --- a/drivers/gpu/drm/imx/ipuv3-crtc.c +++ b/drivers/gpu/drm/imx/ipuv3-crtc.c @@ -66,6 +66,7 @@ struct ipu_crtc { struct ipu_flip_work *flip_work; int irq; u32 bus_format; + u32 bus_flags; int di_hsync_pin; int di_vsync_pin; }; @@ -271,8 +272,10 @@ static int ipu_crtc_mode_set(struct drm_crtc *crtc, else sig_cfg.clkflags = 0; - sig_cfg.enable_pol = 1; - sig_cfg.clk_pol = 0; + sig_cfg.enable_pol = !(ipu_crtc->bus_flags & DRM_BUS_FLAG_DE_LOW); + /* Default to driving pixel data on negative clock edges */ + sig_cfg.clk_pol = !!(ipu_crtc->bus_flags & + DRM_BUS_FLAG_PIXDATA_POSEDGE); sig_cfg.bus_format = ipu_crtc->bus_format; sig_cfg.v_to_h_sync = 0; sig_cfg.hsync_pin = ipu_crtc->di_hsync_pin; @@ -396,11 +399,12 @@ static void ipu_disable_vblank(struct drm_crtc *crtc) } static int ipu_set_interface_pix_fmt(struct drm_crtc *crtc, - u32 bus_format, int hsync_pin, int vsync_pin) + u32 bus_format, int hsync_pin, int vsync_pin, u32 bus_flags) { struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc); ipu_crtc->bus_format = bus_format; + ipu_crtc->bus_flags = bus_flags; ipu_crtc->di_hsync_pin = hsync_pin; ipu_crtc->di_vsync_pin = vsync_pin; diff --git a/drivers/gpu/drm/imx/parallel-display.c b/drivers/gpu/drm/imx/parallel-display.c index 27755ecbf516..2c442516d4c7 100644 --- a/drivers/gpu/drm/imx/parallel-display.c +++ b/drivers/gpu/drm/imx/parallel-display.c @@ -115,8 +115,8 @@ static void imx_pd_encoder_dpms(struct drm_encoder *encoder, int mode) static void imx_pd_encoder_prepare(struct drm_encoder *encoder) { struct imx_parallel_display *imxpd = enc_to_imxpd(encoder); - - imx_drm_set_bus_format(encoder, imxpd->bus_format); + imx_drm_set_bus_config(encoder, imxpd->bus_format, 2, 3, + imxpd->connector.display_info.bus_flags); } static void imx_pd_encoder_commit(struct drm_encoder *encoder) From 97a6075d7cfabd0d45f8667a89da2a5fd13b4e70 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Date: Tue, 24 May 2016 08:31:51 +0200 Subject: [PATCH 072/223] drm/imx: parallel-display: remove dead code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The 'mode_valid' flag is never set in this driver. Remove it and the code that depends on it. Signed-off-by: Lothar Waßmann Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/parallel-display.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/drivers/gpu/drm/imx/parallel-display.c b/drivers/gpu/drm/imx/parallel-display.c index 2c442516d4c7..2d1fd02cd3d6 100644 --- a/drivers/gpu/drm/imx/parallel-display.c +++ b/drivers/gpu/drm/imx/parallel-display.c @@ -35,7 +35,6 @@ struct imx_parallel_display { void *edid; int edid_len; u32 bus_format; - int mode_valid; struct drm_display_mode mode; struct drm_panel *panel; }; @@ -68,17 +67,6 @@ static int imx_pd_connector_get_modes(struct drm_connector *connector) num_modes = drm_add_edid_modes(connector, imxpd->edid); } - if (imxpd->mode_valid) { - struct drm_display_mode *mode = drm_mode_create(connector->dev); - - if (!mode) - return -EINVAL; - drm_mode_copy(mode, &imxpd->mode); - mode->type |= DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, - drm_mode_probed_add(connector, mode); - num_modes++; - } - if (np) { struct drm_display_mode *mode = drm_mode_create(connector->dev); From c82b4d73e2cd32fff41be0cd6e75ea83d32943b3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Date: Tue, 24 May 2016 08:31:49 +0200 Subject: [PATCH 073/223] drm/imx: imx-ldb: honor 'native-mode' property when selecting video mode from DT MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch allows to select a specific video mode from a list of modes defined in DT by setting the 'native-mode' property appropriately. This change does not affect the behaviour of existing platforms, since they either: - have just one display-timings subnode - have the native-mode property pointing to the first entry - let the bootloader select the appropriate timing Signed-off-by: Lothar Waßmann Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/imx-ldb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c index 5f8f0bf45a62..beff793bb717 100644 --- a/drivers/gpu/drm/imx/imx-ldb.c +++ b/drivers/gpu/drm/imx/imx-ldb.c @@ -25,6 +25,7 @@ #include #include #include +#include