diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 80f5dc691038..5c175f839efd 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -16,6 +16,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/platform_device.h>
 #include <linux/gpio/consumer.h>
+#include <linux/gpio/machine.h>
 #include <linux/acpi.h>
 #include <linux/delay.h>
 
@@ -64,6 +65,15 @@ static const struct acpi_gpio_mapping acpi_dwc3_byt_gpios[] = {
 	{ },
 };
 
+static struct gpiod_lookup_table platform_bytcr_gpios = {
+	.dev_id		= "0000:00:16.0",
+	.table		= {
+		GPIO_LOOKUP("INT33FC:00", 54, "reset", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("INT33FC:02", 14, "cs", GPIO_ACTIVE_HIGH),
+		{}
+	},
+};
+
 static int dwc3_pci_quirks(struct dwc3_pci *dwc)
 {
 	struct platform_device		*dwc3 = dwc->dwc3;
@@ -124,6 +134,13 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc)
 			if (ret)
 				dev_dbg(&pdev->dev, "failed to add mapping table\n");
 
+			/*
+			 * A lot of BYT devices lack ACPI resource entries for
+			 * the GPIOs, add a fallback mapping to the reference
+			 * design GPIOs which all boards seem to use.
+			 */
+			gpiod_add_lookup_table(&platform_bytcr_gpios);
+
 			/*
 			 * These GPIOs will turn on the USB2 PHY. Note that we have to
 			 * put the gpio descriptors again here because the phy driver
@@ -239,6 +256,7 @@ static void dwc3_pci_remove(struct pci_dev *pci)
 {
 	struct dwc3_pci		*dwc = pci_get_drvdata(pci);
 
+	gpiod_remove_lookup_table(&platform_bytcr_gpios);
 #ifdef CONFIG_PM
 	cancel_work_sync(&dwc->wakeup_work);
 #endif