USB: Add DT probing support to ehci-spear and ohci-spear

This patch adds support to configure the SPEAr EHCI & OHCI driver via
device-tree instead of platform_data.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/devicetree/bindings/usb/spear-usb.txt

@@ -0,0 +1,39 @@
+ST SPEAr SoC USB controllers:
+-----------------------------
+
+EHCI:
+-----
+
+Required properties:
+- compatible: "st,spear600-ehci"
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- interrupts: Should contain the EHCI interrupt
+
+Example:
+
+	ehci@e1800000 {
+		compatible = "st,spear600-ehci", "usb-ehci";
+		reg = <0xe1800000 0x1000>;
+		interrupt-parent = <&vic1>;
+		interrupts = <27>;
+	};
+
+
+OHCI:
+-----
+
+Required properties:
+- compatible: "st,spear600-ohci"
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- interrupts: Should contain the OHCI interrupt
+
+Example:
+
+	ohci@e1900000 {
+		compatible = "st,spear600-ohci", "usb-ohci";
+		reg = <0xe1800000 0x1000>;
+		interrupt-parent = <&vic1>;
+		interrupts = <26>;
+	};

drivers/usb/host/ehci-spear.c

@@ -13,6 +13,7 @@
 
 #include <linux/clk.h>
 #include <linux/jiffies.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 
@@ -168,6 +169,8 @@ static int ehci_spear_drv_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(ehci_spear_pm_ops, ehci_spear_drv_suspend,
 		ehci_spear_drv_resume);
 
+static u64 spear_ehci_dma_mask = DMA_BIT_MASK(32);
+
 static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd ;
@@ -175,12 +178,9 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
 	struct resource *res;
 	struct clk *usbh_clk;
 	const struct hc_driver *driver = &ehci_spear_hc_driver;
-	int *pdata = pdev->dev.platform_data;
 	int irq, retval;
 	char clk_name[20] = "usbh_clk";
-
+	static int instance = -1;
-	if (pdata == NULL)
-		return -EFAULT;
 
 	if (usb_disabled())
 		return -ENODEV;
@@ -191,8 +191,22 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
 		goto fail_irq_get;
 	}
 
-	if (*pdata >= 0)
+	/*
-		sprintf(clk_name, "usbh.%01d_clk", *pdata);
+	 * Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we have dma capability bindings this can go away.
+	 */
+	if (!pdev->dev.dma_mask)
+		pdev->dev.dma_mask = &spear_ehci_dma_mask;
+
+	/*
+	 * Increment the device instance, when probing via device-tree
+	 */
+	if (pdev->id < 0)
+		instance++;
+	else
+		instance = pdev->id;
+	sprintf(clk_name, "usbh.%01d_clk", instance);
 
 	usbh_clk = clk_get(NULL, clk_name);
 	if (IS_ERR(usbh_clk)) {
@@ -277,6 +291,11 @@ static int spear_ehci_hcd_drv_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static struct of_device_id spear_ehci_id_table[] __devinitdata = {
+	{ .compatible = "st,spear600-ehci", },
+	{ },
+};
+
 static struct platform_driver spear_ehci_hcd_driver = {
 	.probe		= spear_ehci_hcd_drv_probe,
 	.remove		= spear_ehci_hcd_drv_remove,
@@ -285,6 +304,7 @@ static struct platform_driver spear_ehci_hcd_driver = {
 		.name = "spear-ehci",
 		.bus = &platform_bus_type,
 		.pm = &ehci_spear_pm_ops,
+		.of_match_table = of_match_ptr(spear_ehci_id_table),
 	}
 };
 

drivers/usb/host/ohci-spear.c

@@ -14,6 +14,7 @@
 #include <linux/signal.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/of.h>
 
 struct spear_ohci {
 	struct ohci_hcd ohci;
@@ -90,6 +91,8 @@ static const struct hc_driver ohci_spear_hc_driver = {
 	.start_port_reset	= ohci_start_port_reset,
 };
 
+static u64 spear_ohci_dma_mask = DMA_BIT_MASK(32);
+
 static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
 {
 	const struct hc_driver *driver = &ohci_spear_hc_driver;
@@ -98,11 +101,8 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
 	struct spear_ohci *ohci_p;
 	struct resource *res;
 	int retval, irq;
-	int *pdata = pdev->dev.platform_data;
 	char clk_name[20] = "usbh_clk";
-
+	static int instance = -1;
-	if (pdata == NULL)
-		return -EFAULT;
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
@@ -110,8 +110,22 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
 		goto fail_irq_get;
 	}
 
-	if (*pdata >= 0)
+	/*
-		sprintf(clk_name, "usbh.%01d_clk", *pdata);
+	 * Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we have dma capability bindings this can go away.
+	 */
+	if (!pdev->dev.dma_mask)
+		pdev->dev.dma_mask = &spear_ohci_dma_mask;
+
+	/*
+	 * Increment the device instance, when probing via device-tree
+	 */
+	if (pdev->id < 0)
+		instance++;
+	else
+		instance = pdev->id;
+	sprintf(clk_name, "usbh.%01d_clk", instance);
 
 	usbh_clk = clk_get(NULL, clk_name);
 	if (IS_ERR(usbh_clk)) {
@@ -222,6 +236,11 @@ static int spear_ohci_hcd_drv_resume(struct platform_device *dev)
 }
 #endif
 
+static struct of_device_id spear_ohci_id_table[] __devinitdata = {
+	{ .compatible = "st,spear600-ohci", },
+	{ },
+};
+
 /* Driver definition to register with the platform bus */
 static struct platform_driver spear_ohci_hcd_driver = {
 	.probe =	spear_ohci_hcd_drv_probe,
@@ -233,6 +252,7 @@ static struct platform_driver spear_ohci_hcd_driver = {
 	.driver = {
 		.owner = THIS_MODULE,
 		.name = "spear-ohci",
+		.of_match_table = of_match_ptr(spear_ohci_id_table),
 	},
 };