UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

Merge branch 'samsung/exynos-multiplatform' into next/multiplatform 

These patches get us closer to adding multiplatform support on
the Exynos platform, they are part of a longer series of
patches.  This would get all the simple stuff out of the
way, and I don't think there is a big risk of introducing
regressions with these.

A lot of the other patches have already been merged into
subsystem trees. After this series in in arm-soc, what is
left comes down to

* The ASoC conversion to dmaengine won't make it unless someone
  who knows that code better steps up to do it right away. This
  means that we won't have audio in a 3.10 multiplatform kernel
  on Exynos, but it will still work for users that don't enable
  multiplatform.

* The irqchip (combiner), clk and clksource patches are all based
  on top   of other changesets we pulled in from your trees, so I
  would not make them part of the next/multiplatform branch. We can
  apply them on top of the next/drivers branch once they are
  tested successfully.

* A trivial patch is needed in the end to actually make
  CONFIG_ARCH_EXYNOS visible in multiplatform configurations.
  We will do that as a separate patch once everything else is
  there.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2013-04-19 13:35:57 +02:00
parent 408e713545 bd51de53e1
commit 56b690481c
42 changed files with 203 additions and 149 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
arch/arm/Kconfig
View File

@ -776,18 +776,11 @@ config ARCH_S5PV210
help
Samsung S5PV210/S5PC110 series based systems
config ARCH_EXYNOS
config ARCH_EXYNOS_SINGLE
bool "Samsung EXYNOS"
select ARCH_HAS_CPUFREQ
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_SPARSEMEM_ENABLE
select CLKDEV_LOOKUP
select CPU_V7
select GENERIC_CLOCKEVENTS
select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
select NEED_MACH_GPIO_H
select NEED_MACH_MEMORY_H
help

8
arch/arm/Kconfig.debug
View File

@ -348,6 +348,7 @@ choice
config DEBUG_S3C_UART0
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
bool "Use S3C UART 0 for low-level debug"
help
Say Y here if you want the debug print routines to direct
@ -359,6 +360,7 @@ choice
config DEBUG_S3C_UART1
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
bool "Use S3C UART 1 for low-level debug"
help
Say Y here if you want the debug print routines to direct
@ -370,6 +372,7 @@ choice
config DEBUG_S3C_UART2
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
bool "Use S3C UART 2 for low-level debug"
help
Say Y here if you want the debug print routines to direct
@ -381,6 +384,7 @@ choice
config DEBUG_S3C_UART3
depends on PLAT_SAMSUNG && ARCH_EXYNOS
select DEBUG_EXYNOS_UART
bool "Use S3C UART 3 for low-level debug"
help
Say Y here if you want the debug print routines to direct
@ -510,6 +514,9 @@ choice
endchoice
config DEBUG_EXYNOS_UART
bool
config DEBUG_IMX_UART_PORT
int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \
@ -607,6 +614,7 @@ config DEBUG_LL_INCLUDE
string
default "debug/bcm2835.S" if DEBUG_BCM2835
default "debug/cns3xxx.S" if DEBUG_CNS3XXX
default "debug/exynos.S" if DEBUG_EXYNOS_UART
default "debug/icedcc.S" if DEBUG_ICEDCC
default "debug/imx.S" if DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \

2
arch/arm/configs/exynos4_defconfig
View File

@ -4,7 +4,7 @@ CONFIG_KALLSYMS_ALL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_EXYNOS_SINGLE=y
CONFIG_S3C_LOWLEVEL_UART_PORT=1
CONFIG_MACH_SMDKC210=y
CONFIG_MACH_ARMLEX4210=y

12
arch/arm/mach-exynos/include/mach/debug-macro.S → arch/arm/include/debug/exynos.S
View File

@ -1,10 +1,7 @@
/* linux/arch/arm/mach-exynos4/include/mach/debug-macro.S
*
/*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@ -12,7 +9,10 @@
/* pull in the relevant register and map files. */
#include <mach/map.h>
#define S3C_ADDR_BASE 0xF6000000
#define S3C_VA_UART S3C_ADDR_BASE + 0x01000000
#define EXYNOS4_PA_UART 0x13800000
#define EXYNOS5_PA_UART 0x12C00000
/* note, for the boot process to work we have to keep the UART
* virtual address aligned to an 1MiB boundary for the L1
@ -36,4 +36,4 @@
#define fifo_full fifo_full_s5pv210
#define fifo_level fifo_level_s5pv210
#include <plat/debug-macro.S>
#include <debug/samsung.S>

0
arch/arm/plat-samsung/include/plat/debug-macro.S → arch/arm/include/debug/samsung.S
View File

40
arch/arm/mach-exynos/Kconfig
View File

@ -7,6 +7,20 @@
# Configuration options for the EXYNOS4
config ARCH_EXYNOS
# TODO: make this visible after all drivers are converted
bool "Samsung EXYNOS" if ARCH_MULTI_V7 && BROKEN
default ARCH_EXYNOS_SINGLE
select ARCH_HAS_CPUFREQ
select CLKDEV_LOOKUP
select CPU_V7
select GENERIC_CLOCKEVENTS
select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
help
Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
if ARCH_EXYNOS
menu "SAMSUNG EXYNOS SoCs Support"
@ -20,6 +34,9 @@ config ARCH_EXYNOS4
help
Samsung EXYNOS4 SoCs based systems
config ARCH_EXYNOS4_SINGLE
def_bool ARCH_EXYNOS4 && ARCH_EXYNOS_SINGLE
config ARCH_EXYNOS5
bool "SAMSUNG EXYNOS5"
select HAVE_ARM_SCU if SMP
@ -37,7 +54,7 @@ config CPU_EXYNOS4210
select PM_GENERIC_DOMAINS
select S5P_PM if PM
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
select SAMSUNG_DMADEV if ARCH_EXYNOS_SINGLE
help
Enable EXYNOS4210 CPU support
@ -47,7 +64,7 @@ config SOC_EXYNOS4212
depends on ARCH_EXYNOS4
select S5P_PM if PM
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
select SAMSUNG_DMADEV if ARCH_EXYNOS_SINGLE
help
Enable EXYNOS4212 SoC support
@ -55,7 +72,7 @@ config SOC_EXYNOS4412
bool "SAMSUNG EXYNOS4412"
default y
depends on ARCH_EXYNOS4
select SAMSUNG_DMADEV
select SAMSUNG_DMADEV if ARCH_EXYNOS_SINGLE
help
Enable EXYNOS4412 SoC support
@ -66,7 +83,7 @@ config SOC_EXYNOS5250
select S5P_PM if PM
select S5P_SLEEP if PM
select S5P_DEV_MFC
select SAMSUNG_DMADEV
select SAMSUNG_DMADEV if ARCH_EXYNOS_SINGLE
help
Enable EXYNOS5250 SoC support
@ -87,6 +104,19 @@ config EXYNOS4_MCT
help
Use MCT (Multi Core Timer) as kernel timers
config EXYNOS_ATAGS
bool "ATAGS based boot for EXYNOS (deprecated)"
depends on !ARCH_MULTIPLATFORM
depends on ATAGS
default y
help
The EXYNOS platform is moving towards being completely probed
through device tree. This enables support for board files using
the traditional ATAGS boot format.
Note that this option is not available for multiplatform builds.
if EXYNOS_ATAGS
config EXYNOS_DEV_DMA
bool
help
@ -402,6 +432,8 @@ config MACH_SMDK4412
Machine support for Samsung SMDK4412
endif
endif
comment "Flattened Device Tree based board for EXYNOS SoCs"
config MACH_EXYNOS4_DT

5
arch/arm/mach-exynos/Makefile
View File

@ -4,6 +4,7 @@
# http://www.samsung.com/
#
# Licensed under GPLv2
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
obj-y :=
obj-m :=
@ -48,12 +49,12 @@ obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o
# device support
obj-y += dev-uart.o
obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o
obj-$(CONFIG_ARCH_EXYNOS4_SINGLE) += dev-audio.o
obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o
obj-$(CONFIG_EXYNOS_DEV_DMA) += dma.o
obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o
obj-$(CONFIG_ARCH_EXYNOS) += setup-i2c0.o
obj-$(CONFIG_ARCH_EXYNOS_SINGLE) += setup-i2c0.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o

6
arch/arm/mach-exynos/common.c
View File

@ -368,6 +368,9 @@ static void __init exynos4_map_io(void)
else
iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
if (!IS_ENABLED(CONFIG_EXYNOS_ATAGS))
return
/* initialize device information early */
exynos4_default_sdhci0();
exynos4_default_sdhci1();
@ -570,6 +573,8 @@ static void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no)
s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no);
}
#ifdef CONFIG_EXYNOS_ATAGS
static void __iomem *exynos_eint_base;
static DEFINE_SPINLOCK(eint_lock);
@ -875,3 +880,4 @@ static int __init exynos_init_irq_eint(void)
return 0;
}
arch_initcall(exynos_init_irq_eint);
#endif

1
arch/arm/mach-exynos/dev-uart.c
View File

@ -20,6 +20,7 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <plat/devs.h>

5
arch/arm/mach-exynos/include/mach/irqs.h
View File

@ -466,7 +466,10 @@
#define IRQ_TIMER_BASE (IRQ_GPIO_END + 64)
/* Set the default NR_IRQS */
#define EXYNOS_NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT)
#define NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT)
#ifndef CONFIG_SPARSE_IRQ
#define NR_IRQS EXYNOS_NR_IRQS
#endif
#endif /* __ASM_ARCH_IRQS_H */

1
arch/arm/mach-exynos/mach-armlex4210.c
View File

@ -25,6 +25,7 @@
#include <plat/regs-srom.h>
#include <plat/sdhci.h>
#include <mach/irqs.h>
#include <mach/map.h>
#include "common.h"

1
arch/arm/mach-exynos/mach-nuri.c
View File

@ -53,6 +53,7 @@
#include <plat/fimc-core.h>
#include <plat/camport.h>
#include <mach/irqs.h>
#include <mach/map.h>
#include "common.h"

1
arch/arm/mach-exynos/mach-origen.c
View File

@ -46,6 +46,7 @@
#include <plat/hdmi.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <drm/exynos_drm.h>
#include "common.h"

1
arch/arm/mach-exynos/mach-smdk4x12.c
View File

@ -39,6 +39,7 @@
#include <plat/regs-serial.h>
#include <plat/sdhci.h>
#include <mach/irqs.h>
#include <mach/map.h>
#include <drm/exynos_drm.h>

1
arch/arm/mach-exynos/mach-smdkv310.c
View File

@ -43,6 +43,7 @@
#include <plat/clock.h>
#include <plat/hdmi.h>
#include <mach/irqs.h>
#include <mach/map.h>
#include <drm/exynos_drm.h>

2
arch/arm/mach-exynos/setup-sdhci-gpio.c
View File

@ -19,8 +19,8 @@
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <mach/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-sdhci.h>
#include <plat/sdhci.h>
void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)

2
arch/arm/mach-s3c24xx/include/mach/debug-macro.S
View File

@ -98,4 +98,4 @@
/* include the reset of the code which will do the work */
#include <plat/debug-macro.S>
#include <debug/samsung.S>

2
arch/arm/mach-s3c64xx/include/mach/debug-macro.S
View File

@ -35,4 +35,4 @@
* will be fine with us.
*/
#include <plat/debug-macro.S>
#include <debug/samsung.S>

2
arch/arm/mach-s5p64x0/include/mach/debug-macro.S
View File

@ -30,4 +30,4 @@
#endif
.endm
#include <plat/debug-macro.S>
#include <debug/samsung.S>

2
arch/arm/mach-s5pc100/include/mach/debug-macro.S
View File

@ -36,4 +36,4 @@
* will be fine with us.
*/
#include <plat/debug-macro.S>
#include <debug/samsung.S>

1
arch/arm/mach-s5pc100/setup-sdhci-gpio.c
View File

@ -19,7 +19,6 @@
#include <linux/mmc/card.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-sdhci.h>
#include <plat/sdhci.h>
void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)

2
arch/arm/mach-s5pv210/include/mach/debug-macro.S
View File

@ -38,4 +38,4 @@
* will be fine with us.
*/
#include <plat/debug-macro.S>
#include <debug/samsung.S>

1
arch/arm/mach-s5pv210/setup-sdhci-gpio.c
View File

@ -20,7 +20,6 @@
#include <linux/mmc/card.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-sdhci.h>
#include <plat/sdhci.h>
void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)

7
arch/arm/plat-samsung/Kconfig
View File

@ -13,6 +13,10 @@ config PLAT_SAMSUNG
help
Base platform code for all Samsung SoC based systems
config PLAT_SAMSUNG_SINGLE
def_bool PLAT_SAMSUNG && !ARCH_MULTIPLATFORM
config PLAT_S5P
bool
depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
@ -23,7 +27,7 @@ config PLAT_S5P
select GIC_NON_BANKED if ARCH_EXYNOS4
select NO_IOPORT
select PLAT_SAMSUNG
select S3C_GPIO_TRACK
select S3C_GPIO_TRACK if PLAT_SAMSUNG_SINGLE
select S5P_GPIO_DRVSTR
select SAMSUNG_CLKSRC
select SAMSUNG_GPIOLIB_4BIT
@ -178,6 +182,7 @@ config S5P_DEV_UART
config S3C_ADC
bool "ADC common driver support"
depends on PLAT_SAMSUNG_SINGLE
help
Core support for the ADC block found in the Samsung SoC systems
for drivers such as the touchscreen and hwmon to use to share

8
arch/arm/plat-samsung/Makefile
View File

@ -4,6 +4,9 @@
#
# Licensed under GPLv2
ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include
ccflags-$(CONFIG_ARCH_EXYNOS) += -I$(srctree)/arch/arm/mach-exynos/include
obj-y :=
obj-m :=
obj-n := dummy.o
@ -34,7 +37,7 @@ obj-$(CONFIG_S3C_ADC) += adc.o
obj-y += platformdata.o
obj-y += devs.o
obj-$(CONFIG_PLAT_SAMSUNG_SINGLE) += devs.o
obj-y += dev-uart.o
obj-$(CONFIG_S5P_DEV_MFC) += s5p-dev-mfc.o
obj-$(CONFIG_S5P_DEV_UART) += s5p-dev-uart.o
@ -51,9 +54,10 @@ obj-$(CONFIG_S3C_DMA) += dma.o s3c-dma-ops.o
obj-$(CONFIG_SAMSUNG_DMADEV) += dma-ops.o
# PM support
obj-$(CONFIG_PM) += pm.o
ifdef CONFIG_PLAT_SAMSUNG_SINGLE
obj-$(CONFIG_PM) += pm-gpio.o
endif
obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o
obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o

45
arch/arm/plat-samsung/devs.c
View File

@ -878,51 +878,6 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
}
#endif /* CONFIG_PLAT_S3C24XX */
/* MFC */
#ifdef CONFIG_S5P_DEV_MFC
static struct resource s5p_mfc_resource[] = {
[0] = DEFINE_RES_MEM(S5P_PA_MFC, SZ_64K),
[1] = DEFINE_RES_IRQ(IRQ_MFC),
};
struct platform_device s5p_device_mfc = {
.name = "s5p-mfc",
.id = -1,
.num_resources = ARRAY_SIZE(s5p_mfc_resource),
.resource = s5p_mfc_resource,
};
/*
* MFC hardware has 2 memory interfaces which are modelled as two separate
* platform devices to let dma-mapping distinguish between them.
*
* MFC parent device (s5p_device_mfc) must be registered before memory
* interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r).
*/
struct platform_device s5p_device_mfc_l = {
.name = "s5p-mfc-l",
.id = -1,
.dev = {
.parent = &s5p_device_mfc.dev,
.dma_mask = &samsung_device_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
struct platform_device s5p_device_mfc_r = {
.name = "s5p-mfc-r",
.id = -1,
.dev = {
.parent = &s5p_device_mfc.dev,
.dma_mask = &samsung_device_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
#endif /* CONFIG_S5P_DEV_MFC */
/* MIPI CSIS */
#ifdef CONFIG_S5P_DEV_CSIS0

5
arch/arm/plat-samsung/include/plat/pm.h
View File

@ -166,6 +166,7 @@ extern void s3c_pm_check_store(void);
*/
extern void s3c_pm_configure_extint(void);
#ifdef CONFIG_PLAT_SAMSUNG_SINGLE
/**
* samsung_pm_restore_gpios() - restore the state of the gpios after sleep.
*
@ -181,6 +182,10 @@ extern void samsung_pm_restore_gpios(void);
* Save the GPIO states for resotration on resume. See samsung_pm_restore_gpios().
*/
extern void samsung_pm_save_gpios(void);
#else
#define samsung_pm_restore_gpios() do { } while(0)
#define samsung_pm_save_gpios() do { } while(0)
#endif
extern void s3c_pm_save_core(void);
extern void s3c_pm_restore_core(void);

56
arch/arm/plat-samsung/include/plat/sdhci.h
View File

@ -18,62 +18,9 @@
#ifndef __PLAT_S3C_SDHCI_H
#define __PLAT_S3C_SDHCI_H __FILE__
#include <linux/platform_data/mmc-sdhci-s3c.h>
#include <plat/devs.h>
struct platform_device;
struct mmc_host;
struct mmc_card;
struct mmc_ios;
enum cd_types {
S3C_SDHCI_CD_INTERNAL, /* use mmc internal CD line */
S3C_SDHCI_CD_EXTERNAL, /* use external callback */
S3C_SDHCI_CD_GPIO, /* use external gpio pin for CD line */
S3C_SDHCI_CD_NONE, /* no CD line, use polling to detect card */
S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */
};
/**
* struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
* @max_width: The maximum number of data bits supported.
* @host_caps: Standard MMC host capabilities bit field.
* @host_caps2: The second standard MMC host capabilities bit field.
* @cd_type: Type of Card Detection method (see cd_types enum above)
* @ext_cd_init: Initialize external card detect subsystem. Called on
* sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL.
* notify_func argument is a callback to the sdhci-s3c driver
* that triggers the card detection event. Callback arguments:
* dev is pointer to platform device of the host controller,
* state is new state of the card (0 - removed, 1 - inserted).
* @ext_cd_cleanup: Cleanup external card detect subsystem. Called on
* sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL.
* notify_func argument is the same callback as for ext_cd_init.
* @ext_cd_gpio: gpio pin used for external CD line, valid only if
* cd_type == S3C_SDHCI_CD_GPIO
* @ext_cd_gpio_invert: invert values for external CD gpio line
* @cfg_gpio: Configure the GPIO for a specific card bit-width
*
* Initialisation data specific to either the machine or the platform
* for the device driver to use or call-back when configuring gpio or
* card speed information.
*/
struct s3c_sdhci_platdata {
unsigned int max_width;
unsigned int host_caps;
unsigned int host_caps2;
unsigned int pm_caps;
enum cd_types cd_type;
int ext_cd_gpio;
bool ext_cd_gpio_invert;
int (*ext_cd_init)(void (*notify_func)(struct platform_device *,
int state));
int (*ext_cd_cleanup)(void (*notify_func)(struct platform_device *,
int state));
void (*cfg_gpio)(struct platform_device *dev, int width);
};
/* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data
* @pd: The default platform data for this device.
* @set: Pointer to the platform data to fill in.
@ -378,5 +325,4 @@ static inline void s3c_sdhci_setname(int id, char *name)
break;
}
}
#endif /* __PLAT_S3C_SDHCI_H */

1
arch/arm/plat-samsung/irq-vic-timer.c
View File

@ -19,6 +19,7 @@
#include <linux/io.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <plat/cpu.h>
#include <plat/irq-vic-timer.h>
#include <plat/regs-timer.h>

1
arch/arm/plat-samsung/pm.c
View File

@ -27,6 +27,7 @@
#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
#include <mach/regs-irq.h>
#include <mach/irqs.h>
#include <asm/irq.h>
#include <plat/pm.h>

42
arch/arm/plat-samsung/s5p-dev-mfc.c
View File

@ -18,10 +18,50 @@
#include <linux/of.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <plat/devs.h>
#include <plat/irqs.h>
#include <plat/mfc.h>
static struct resource s5p_mfc_resource[] = {
[0] = DEFINE_RES_MEM(S5P_PA_MFC, SZ_64K),
[1] = DEFINE_RES_IRQ(IRQ_MFC),
};
struct platform_device s5p_device_mfc = {
.name = "s5p-mfc",
.id = -1,
.num_resources = ARRAY_SIZE(s5p_mfc_resource),
.resource = s5p_mfc_resource,
};
/*
* MFC hardware has 2 memory interfaces which are modelled as two separate
* platform devices to let dma-mapping distinguish between them.
*
* MFC parent device (s5p_device_mfc) must be registered before memory
* interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r).
*/
struct platform_device s5p_device_mfc_l = {
.name = "s5p-mfc-l",
.id = -1,
.dev = {
.parent = &s5p_device_mfc.dev,
.dma_mask = &s5p_device_mfc_l.dev.coherent_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
struct platform_device s5p_device_mfc_r = {
.name = "s5p-mfc-r",
.id = -1,
.dev = {
.parent = &s5p_device_mfc.dev,
.dma_mask = &s5p_device_mfc_r.dev.coherent_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
struct s5p_mfc_reserved_mem {
phys_addr_t base;
unsigned long size;

1
arch/arm/plat-samsung/s5p-irq.c
View File

@ -15,6 +15,7 @@
#include <linux/io.h>
#include <linux/irqchip/arm-vic.h>
#include <mach/irqs.h>
#include <mach/map.h>
#include <plat/regs-timer.h>
#include <plat/cpu.h>

2
drivers/gpio/Makefile
View File

@ -57,7 +57,7 @@ obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o
obj-$(CONFIG_PLAT_SAMSUNG_SINGLE) += gpio-samsung.o
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o

2
drivers/mmc/host/Kconfig
View File

@ -180,7 +180,7 @@ config MMC_SDHCI_TEGRA
config MMC_SDHCI_S3C
tristate "SDHCI support on Samsung S3C SoC"
depends on MMC_SDHCI && PLAT_SAMSUNG
depends on MMC_SDHCI && PLAT_SAMSUNG_SINGLE
help
This selects the Secure Digital Host Controller Interface (SDHCI)
often referrered to as the HSMMC block in some of the Samsung S3C

0
arch/arm/plat-samsung/include/plat/regs-sdhci.h → drivers/mmc/host/sdhci-s3c-regs.h
View File

5
drivers/mmc/host/sdhci-s3c.c
View File

@ -15,6 +15,7 @@
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/platform_data/mmc-sdhci-s3c.h>
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/io.h>
@ -28,9 +29,7 @@
#include <linux/mmc/host.h>
#include <plat/sdhci.h>
#include <plat/regs-sdhci.h>
#include "sdhci-s3c-regs.h"
#include "sdhci.h"
#define MAX_BUS_CLK (4)

4
drivers/mtd/onenand/samsung.c
View File

@ -23,11 +23,11 @@
#include <linux/mtd/partitions.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <asm/mach/flash.h>
#include <plat/regs-onenand.h>
#include <linux/io.h>
#include "samsung.h"
enum soc_type {
TYPE_S3C6400,

2
arch/arm/plat-samsung/include/plat/regs-onenand.h → drivers/mtd/onenand/samsung.h
View File

@ -11,8 +11,6 @@
#ifndef __SAMSUNG_ONENAND_H__
#define __SAMSUNG_ONENAND_H__
#include <mach/hardware.h>
/*
* OneNAND Controller
*/

3
drivers/rtc/rtc-s3c.c
View File

@ -29,9 +29,8 @@
#include <linux/uaccess.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <plat/regs-rtc.h>
#include "rtc-s3c.h"
enum s3c_cpu_type {
TYPE_S3C2410,

3
arch/arm/plat-samsung/include/plat/regs-rtc.h → drivers/rtc/rtc-s3c.h
View File

@ -1,5 +1,4 @@
/* arch/arm/mach-s3c2410/include/mach/regs-rtc.h
*
/*
* Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
* http://www.simtec.co.uk/products/SWLINUX/
*

2
drivers/thermal/exynos_thermal.c
View File

@ -39,8 +39,6 @@
#include <linux/cpu_cooling.h>
#include <linux/of.h>
#include <plat/cpu.h>
/* Exynos generic registers */
#define EXYNOS_TMU_REG_TRIMINFO 0x0
#define EXYNOS_TMU_REG_CONTROL 0x20

56
include/linux/platform_data/mmc-sdhci-s3c.h Normal file
View File

@ -0,0 +1,56 @@
#ifndef __PLATFORM_DATA_SDHCI_S3C_H
#define __PLATFORM_DATA_SDHCI_S3C_H
struct platform_device;
enum cd_types {
S3C_SDHCI_CD_INTERNAL, /* use mmc internal CD line */
S3C_SDHCI_CD_EXTERNAL, /* use external callback */
S3C_SDHCI_CD_GPIO, /* use external gpio pin for CD line */
S3C_SDHCI_CD_NONE, /* no CD line, use polling to detect card */
S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */
};
/**
* struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
* @max_width: The maximum number of data bits supported.
* @host_caps: Standard MMC host capabilities bit field.
* @host_caps2: The second standard MMC host capabilities bit field.
* @cd_type: Type of Card Detection method (see cd_types enum above)
* @ext_cd_init: Initialize external card detect subsystem. Called on
* sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL.
* notify_func argument is a callback to the sdhci-s3c driver
* that triggers the card detection event. Callback arguments:
* dev is pointer to platform device of the host controller,
* state is new state of the card (0 - removed, 1 - inserted).
* @ext_cd_cleanup: Cleanup external card detect subsystem. Called on
* sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL.
* notify_func argument is the same callback as for ext_cd_init.
* @ext_cd_gpio: gpio pin used for external CD line, valid only if
* cd_type == S3C_SDHCI_CD_GPIO
* @ext_cd_gpio_invert: invert values for external CD gpio line
* @cfg_gpio: Configure the GPIO for a specific card bit-width
*
* Initialisation data specific to either the machine or the platform
* for the device driver to use or call-back when configuring gpio or
* card speed information.
*/
struct s3c_sdhci_platdata {
unsigned int max_width;
unsigned int host_caps;
unsigned int host_caps2;
unsigned int pm_caps;
enum cd_types cd_type;
int ext_cd_gpio;
bool ext_cd_gpio_invert;
int (*ext_cd_init)(void (*notify_func)(struct platform_device *,
int state));
int (*ext_cd_cleanup)(void (*notify_func)(struct platform_device *,
int state));
void (*cfg_gpio)(struct platform_device *dev, int width);
};
#endif /* __PLATFORM_DATA_SDHCI_S3C_H */