[PATCH] dvb: flexcop: add BCM3510 ATSC frontend support for Air2PC card
Added support for the Broadcom BCM3510 ATSC (8VSB/16VSB & ITU J83 AnnexB FEC QAM64/256) demodulator used in the first generation of Air2PC ATSC PCI-cards/USB-boxes made by B2C2. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This commit is contained in:
Johannes Stezenbach
Linus Torvalds
parent
cc89c229d9
commit
55f51efdb6
|
|
@ -6,6 +6,7 @@ config DVB_B2C2_FLEXCOP
|
|||
select DVB_MT312
|
||||
select DVB_NXT2002
|
||||
select DVB_STV0297
|
||||
select DVB_BCM3510
|
||||
help
|
||||
Support for the digital TV receiver chip made by B2C2 Inc. included in
|
||||
Technisats PCI cards and USB boxes.
|
||||
|
|
|
|||
|
|
@ -10,6 +10,7 @@
|
|||
#include "stv0299.h"
|
||||
#include "mt352.h"
|
||||
#include "nxt2002.h"
|
||||
#include "bcm3510.h"
|
||||
#include "stv0297.h"
|
||||
#include "mt312.h"
|
||||
|
||||
|
|
@ -285,21 +286,25 @@ static int samsung_tdtc9251dh0_pll_set(struct dvb_frontend* fe, struct dvb_front
|
|||
}
|
||||
|
||||
static struct mt352_config samsung_tdtc9251dh0_config = {
|
||||
|
||||
.demod_address = 0x0f,
|
||||
.demod_init = samsung_tdtc9251dh0_demod_init,
|
||||
.pll_set = samsung_tdtc9251dh0_pll_set,
|
||||
.demod_init = samsung_tdtc9251dh0_demod_init,
|
||||
.pll_set = samsung_tdtc9251dh0_pll_set,
|
||||
};
|
||||
|
||||
static int nxt2002_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
|
||||
static int flexcop_fe_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
|
||||
{
|
||||
struct flexcop_device *fc = fe->dvb->priv;
|
||||
return request_firmware(fw, name, fc->dev);
|
||||
}
|
||||
|
||||
static struct nxt2002_config samsung_tbmv_config = {
|
||||
.demod_address = 0x0a,
|
||||
.request_firmware = nxt2002_request_firmware,
|
||||
.demod_address = 0x0a,
|
||||
.request_firmware = flexcop_fe_request_firmware,
|
||||
};
|
||||
|
||||
static struct bcm3510_config air2pc_atsc_first_gen_config = {
|
||||
.demod_address = 0x0f,
|
||||
.request_firmware = flexcop_fe_request_firmware,
|
||||
};
|
||||
|
||||
static int skystar23_samsung_tbdu18132_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
|
||||
|
|
@ -354,11 +359,16 @@ int flexcop_frontend_init(struct flexcop_device *fc)
|
|||
fc->dev_type = FC_AIR_DVB;
|
||||
info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address);
|
||||
} else
|
||||
/* try the air atsc (nxt2002) */
|
||||
/* try the air atsc 2nd generation (nxt2002) */
|
||||
if ((fc->fe = nxt2002_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) {
|
||||
fc->dev_type = FC_AIR_ATSC;
|
||||
fc->dev_type = FC_AIR_ATSC2;
|
||||
info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address);
|
||||
} else
|
||||
/* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */
|
||||
if ((fc->fe = bcm3510_attach(&air2pc_atsc_first_gen_config, &fc->i2c_adap)) != NULL) {
|
||||
fc->dev_type = FC_AIR_ATSC1;
|
||||
info("found the bcm3510 at i2c address: 0x%02x",air2pc_atsc_first_gen_config.demod_address);
|
||||
} else
|
||||
/* try the cable dvb (stv0297) */
|
||||
if ((fc->fe = stv0297_attach(&alps_tdee4_stv0297_config, &fc->i2c_adap, 0xf8)) != NULL) {
|
||||
fc->dev_type = FC_CABLE;
|
||||
|
|
|
|||
|
|
@ -45,11 +45,12 @@ const char *flexcop_revision_names[] = {
|
|||
|
||||
const char *flexcop_device_names[] = {
|
||||
"Unkown device",
|
||||
"AirStar 2 DVB-T",
|
||||
"AirStar 2 ATSC",
|
||||
"SkyStar 2 DVB-S",
|
||||
"SkyStar 2 DVB-S (old version)",
|
||||
"CableStar 2 DVB-C",
|
||||
"Air2PC/AirStar 2 DVB-T",
|
||||
"Air2PC/AirStar 2 ATSC 1st generation",
|
||||
"Air2PC/AirStar 2 ATSC 2nd generation",
|
||||
"Sky2PC/SkyStar 2 DVB-S",
|
||||
"Sky2PC/SkyStar 2 DVB-S (old version)",
|
||||
"Cable2PC/CableStar 2 DVB-C",
|
||||
};
|
||||
|
||||
const char *flexcop_bus_names[] = {
|
||||
|
|
|
|||
|
|
@ -21,7 +21,8 @@ extern const char *flexcop_revision_names[];
|
|||
typedef enum {
|
||||
FC_UNK = 0,
|
||||
FC_AIR_DVB,
|
||||
FC_AIR_ATSC,
|
||||
FC_AIR_ATSC1,
|
||||
FC_AIR_ATSC2,
|
||||
FC_SKY,
|
||||
FC_SKY_OLD,
|
||||
FC_CABLE,
|
||||
|
|
|
|||
|
|
@ -173,4 +173,12 @@ config DVB_OR51132
|
|||
An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
|
||||
to support this frontend.
|
||||
|
||||
config DVB_BCM3510
|
||||
tristate "Broadcom BCM3510"
|
||||
depends on DVB_CORE
|
||||
select FW_LOADER
|
||||
help
|
||||
An ATSC 8VSB/16VSB and QAM64/256 tuner module. Say Y when you want to
|
||||
support this frontend.
|
||||
|
||||
endmenu
|
||||
|
|
|
|||
|
|
@ -28,3 +28,4 @@ obj-$(CONFIG_DVB_STV0297) += stv0297.o
|
|||
obj-$(CONFIG_DVB_NXT2002) += nxt2002.o
|
||||
obj-$(CONFIG_DVB_OR51211) += or51211.o
|
||||
obj-$(CONFIG_DVB_OR51132) += or51132.o
|
||||
obj-$(CONFIG_DVB_BCM3510) += bcm3510.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,853 @@
|
|||
/*
|
||||
* Support for the Broadcom BCM3510 ATSC demodulator (1st generation Air2PC)
|
||||
*
|
||||
* Copyright (C) 2001-5, B2C2 inc.
|
||||
*
|
||||
* GPL/Linux driver written by Patrick Boettcher <patrick.boettcher@desy.de>
|
||||
*
|
||||
* This driver is "hard-coded" to be used with the 1st generation of
|
||||
* Technisat/B2C2's Air2PC ATSC PCI/USB cards/boxes. The pll-programming
|
||||
* (Panasonic CT10S) is located here, which is actually wrong. Unless there is
|
||||
* another device with a BCM3510, this is no problem.
|
||||
*
|
||||
* The driver works also with QAM64 DVB-C, but had an unreasonable high
|
||||
* UNC. (Tested with the Air2PC ATSC 1st generation)
|
||||
*
|
||||
* You'll need a firmware for this driver in order to get it running. It is
|
||||
* called "dvb-fe-bcm3510-01.fw".
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the Free
|
||||
* Software Foundation; either version 2 of the License, or (at your option)
|
||||
* any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful, but WITHOUT
|
||||
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
||||
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
||||
* more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along with
|
||||
* this program; if not, write to the Free Software Foundation, Inc., 675 Mass
|
||||
* Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/moduleparam.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/firmware.h>
|
||||
|
||||
#include "dvb_frontend.h"
|
||||
#include "bcm3510.h"
|
||||
#include "bcm3510_priv.h"
|
||||
|
||||
struct bcm3510_state {
|
||||
|
||||
struct i2c_adapter* i2c;
|
||||
struct dvb_frontend_ops ops;
|
||||
const struct bcm3510_config* config;
|
||||
struct dvb_frontend frontend;
|
||||
|
||||
/* demodulator private data */
|
||||
struct semaphore hab_sem;
|
||||
u8 firmware_loaded:1;
|
||||
|
||||
unsigned long next_status_check;
|
||||
unsigned long status_check_interval;
|
||||
struct bcm3510_hab_cmd_status1 status1;
|
||||
struct bcm3510_hab_cmd_status2 status2;
|
||||
};
|
||||
|
||||
static int debug;
|
||||
module_param(debug, int, 0644);
|
||||
MODULE_PARM_DESC(debug, "set debugging level (1=info,2=i2c (|-able)).");
|
||||
|
||||
#define dprintk(level,x...) if (level & debug) printk(x)
|
||||
#define dbufout(b,l,m) {\
|
||||
int i; \
|
||||
for (i = 0; i < l; i++) \
|
||||
m("%02x ",b[i]); \
|
||||
}
|
||||
#define deb_info(args...) dprintk(0x01,args)
|
||||
#define deb_i2c(args...) dprintk(0x02,args)
|
||||
#define deb_hab(args...) dprintk(0x04,args)
|
||||
|
||||
/* transfer functions */
|
||||
static int bcm3510_writebytes (struct bcm3510_state *state, u8 reg, u8 *buf, u8 len)
|
||||
{
|
||||
u8 b[256];
|
||||
int err;
|
||||
struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = b, .len = len + 1 };
|
||||
|
||||
b[0] = reg;
|
||||
memcpy(&b[1],buf,len);
|
||||
|
||||
deb_i2c("i2c wr %02x: ",reg);
|
||||
dbufout(buf,len,deb_i2c);
|
||||
deb_i2c("\n");
|
||||
|
||||
if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
|
||||
|
||||
deb_info("%s: i2c write error (addr %02x, reg %02x, err == %i)\n",
|
||||
__FUNCTION__, state->config->demod_address, reg, err);
|
||||
return -EREMOTEIO;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bcm3510_readbytes (struct bcm3510_state *state, u8 reg, u8 *buf, u8 len)
|
||||
{
|
||||
struct i2c_msg msg[] = {
|
||||
{ .addr = state->config->demod_address, .flags = 0, .buf = ®, .len = 1 },
|
||||
{ .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = buf, .len = len }
|
||||
};
|
||||
int err;
|
||||
|
||||
memset(buf,0,len);
|
||||
|
||||
if ((err = i2c_transfer (state->i2c, msg, 2)) != 2) {
|
||||
deb_info("%s: i2c read error (addr %02x, reg %02x, err == %i)\n",
|
||||
__FUNCTION__, state->config->demod_address, reg, err);
|
||||
return -EREMOTEIO;
|
||||
}
|
||||
deb_i2c("i2c rd %02x: ",reg);
|
||||
dbufout(buf,len,deb_i2c);
|
||||
deb_i2c("\n");
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bcm3510_writeB(struct bcm3510_state *state, u8 reg, bcm3510_register_value v)
|
||||
{
|
||||
return bcm3510_writebytes(state,reg,&v.raw,1);
|
||||
}
|
||||
|
||||
static int bcm3510_readB(struct bcm3510_state *state, u8 reg, bcm3510_register_value *v)
|
||||
{
|
||||
return bcm3510_readbytes(state,reg,&v->raw,1);
|
||||
}
|
||||
|
||||
/* Host Access Buffer transfers */
|
||||
static int bcm3510_hab_get_response(struct bcm3510_state *st, u8 *buf, int len)
|
||||
{
|
||||
bcm3510_register_value v;
|
||||
int ret,i;
|
||||
|
||||
v.HABADR_a6.HABADR = 0;
|
||||
if ((ret = bcm3510_writeB(st,0xa6,v)) < 0)
|
||||
return ret;
|
||||
|
||||
for (i = 0; i < len; i++) {
|
||||
if ((ret = bcm3510_readB(st,0xa7,&v)) < 0)
|
||||
return ret;
|
||||
buf[i] = v.HABDATA_a7;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bcm3510_hab_send_request(struct bcm3510_state *st, u8 *buf, int len)
|
||||
{
|
||||
bcm3510_register_value v,hab;
|
||||
int ret,i;
|
||||
unsigned long t;
|
||||
|
||||
/* Check if any previous HAB request still needs to be serviced by the
|
||||
* Aquisition Processor before sending new request */
|
||||
if ((ret = bcm3510_readB(st,0xa8,&v)) < 0)
|
||||
return ret;
|
||||
if (v.HABSTAT_a8.HABR) {
|
||||
deb_info("HAB is running already - clearing it.\n");
|
||||
v.HABSTAT_a8.HABR = 0;
|
||||
bcm3510_writeB(st,0xa8,v);
|
||||
// return -EBUSY;
|
||||
}
|
||||
|
||||
/* Send the start HAB Address (automatically incremented after write of
|
||||
* HABDATA) and write the HAB Data */
|
||||
hab.HABADR_a6.HABADR = 0;
|
||||
if ((ret = bcm3510_writeB(st,0xa6,hab)) < 0)
|
||||
return ret;
|
||||
|
||||
for (i = 0; i < len; i++) {
|
||||
hab.HABDATA_a7 = buf[i];
|
||||
if ((ret = bcm3510_writeB(st,0xa7,hab)) < 0)
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* Set the HABR bit to indicate AP request in progress (LBHABR allows HABR to
|
||||
* be written) */
|
||||
v.raw = 0; v.HABSTAT_a8.HABR = 1; v.HABSTAT_a8.LDHABR = 1;
|
||||
if ((ret = bcm3510_writeB(st,0xa8,v)) < 0)
|
||||
return ret;
|
||||
|
||||
/* Polling method: Wait until the AP finishes processing the HAB request */
|
||||
t = jiffies + 1*HZ;
|
||||
while (time_before(jiffies, t)) {
|
||||
deb_info("waiting for HAB to complete\n");
|
||||
msleep(10);
|
||||
if ((ret = bcm3510_readB(st,0xa8,&v)) < 0)
|
||||
return ret;
|
||||
|
||||
if (!v.HABSTAT_a8.HABR)
|
||||
return 0;
|
||||
}
|
||||
|
||||
deb_info("send_request execution timed out.\n");
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
|
||||
static int bcm3510_do_hab_cmd(struct bcm3510_state *st, u8 cmd, u8 msgid, u8 *obuf, u8 olen, u8 *ibuf, u8 ilen)
|
||||
{
|
||||
u8 ob[olen+2],ib[ilen+2];
|
||||
int ret = 0;
|
||||
|
||||
ob[0] = cmd;
|
||||
ob[1] = msgid;
|
||||
memcpy(&ob[2],obuf,olen);
|
||||
|
||||
deb_hab("hab snd: ");
|
||||
dbufout(ob,olen+2,deb_hab);
|
||||
deb_hab("\n");
|
||||
|
||||
if (down_interruptible(&st->hab_sem) < 0)
|
||||
return -EAGAIN;
|
||||
|
||||
if ((ret = bcm3510_hab_send_request(st, ob, olen+2)) < 0 ||
|
||||
(ret = bcm3510_hab_get_response(st, ib, ilen+2)) < 0)
|
||||
goto error;
|
||||
|
||||
deb_hab("hab get: ");
|
||||
dbufout(ib,ilen+2,deb_hab);
|
||||
deb_hab("\n");
|
||||
|
||||
memcpy(ibuf,&ib[2],ilen);
|
||||
error:
|
||||
up(&st->hab_sem);
|
||||
return ret;
|
||||
}
|
||||
|
||||
#if 0
|
||||
/* not needed, we use a semaphore to prevent HAB races */
|
||||
static int bcm3510_is_ap_ready(struct bcm3510_state *st)
|
||||
{
|
||||
bcm3510_register_value ap,hab;
|
||||
int ret;
|
||||
|
||||
if ((ret = bcm3510_readB(st,0xa8,&hab)) < 0 ||
|
||||
(ret = bcm3510_readB(st,0xa2,&ap) < 0))
|
||||
return ret;
|
||||
|
||||
if (ap.APSTAT1_a2.RESET || ap.APSTAT1_a2.IDLE || ap.APSTAT1_a2.STOP || hab.HABSTAT_a8.HABR) {
|
||||
deb_info("AP is busy\n");
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
static int bcm3510_bert_reset(struct bcm3510_state *st)
|
||||
{
|
||||
bcm3510_register_value b;
|
||||
int ret;
|
||||
|
||||
if ((ret < bcm3510_readB(st,0xfa,&b)) < 0)
|
||||
return ret;
|
||||
|
||||
b.BERCTL_fa.RESYNC = 0; bcm3510_writeB(st,0xfa,b);
|
||||
b.BERCTL_fa.RESYNC = 1; bcm3510_writeB(st,0xfa,b);
|
||||
b.BERCTL_fa.RESYNC = 0; bcm3510_writeB(st,0xfa,b);
|
||||
b.BERCTL_fa.CNTCTL = 1; b.BERCTL_fa.BITCNT = 1; bcm3510_writeB(st,0xfa,b);
|
||||
|
||||
/* clear residual bit counter TODO */
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bcm3510_refresh_state(struct bcm3510_state *st)
|
||||
{
|
||||
if (time_after(jiffies,st->next_status_check)) {
|
||||
bcm3510_do_hab_cmd(st, CMD_STATUS, MSGID_STATUS1, NULL,0, (u8 *)&st->status1, sizeof(st->status1));
|
||||
bcm3510_do_hab_cmd(st, CMD_STATUS, MSGID_STATUS2, NULL,0, (u8 *)&st->status2, sizeof(st->status2));
|
||||
st->next_status_check = jiffies + (st->status_check_interval*HZ)/1000;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bcm3510_read_status(struct dvb_frontend *fe, fe_status_t *status)
|
||||
{
|
||||
struct bcm3510_state* st = fe->demodulator_priv;
|
||||
bcm3510_refresh_state(st);
|
||||
|
||||
*status = 0;
|
||||
if (st->status1.STATUS1.RECEIVER_LOCK)
|
||||
*status |= FE_HAS_LOCK | FE_HAS_SYNC;
|
||||
|
||||
if (st->status1.STATUS1.FEC_LOCK)
|
||||
*status |= FE_HAS_VITERBI;
|
||||
|
||||
if (st->status1.STATUS1.OUT_PLL_LOCK)
|
||||
*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER;
|
||||
|
||||
if (*status & FE_HAS_LOCK)
|
||||
st->status_check_interval = 1500;
|
||||
else /* more frequently checks if no lock has been achieved yet */
|
||||
st->status_check_interval = 500;
|
||||
|
||||
deb_info("real_status: %02x\n",*status);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bcm3510_read_ber(struct dvb_frontend* fe, u32* ber)
|
||||
{
|
||||
struct bcm3510_state* st = fe->demodulator_priv;
|
||||
bcm3510_refresh_state(st);
|
||||
|
||||
*ber = (st->status2.LDBER0 << 16) | (st->status2.LDBER1 << 8) | st->status2.LDBER2;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bcm3510_read_unc(struct dvb_frontend* fe, u32* unc)
|
||||
{
|
||||
struct bcm3510_state* st = fe->demodulator_priv;
|
||||
bcm3510_refresh_state(st);
|
||||
*unc = (st->status2.LDUERC0 << 8) | st->status2.LDUERC1;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bcm3510_read_signal_strength(struct dvb_frontend* fe, u16* strength)
|
||||
{
|
||||
struct bcm3510_state* st = fe->demodulator_priv;
|
||||
s32 t;
|
||||
|
||||
bcm3510_refresh_state(st);
|
||||
t = st->status2.SIGNAL;
|
||||
|
||||
if (t > 190)
|
||||
t = 190;
|
||||
if (t < 90)
|
||||
t = 90;
|
||||
|
||||
t -= 90;
|
||||
t = t * 0xff / 100;
|
||||
/* normalize if necessary */
|
||||
*strength = (t << 8) | t;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bcm3510_read_snr(struct dvb_frontend* fe, u16* snr)
|
||||
{
|
||||
struct bcm3510_state* st = fe->demodulator_priv;
|
||||
bcm3510_refresh_state(st);
|
||||
|
||||
*snr = st->status1.SNR_EST0*1000 + ((st->status1.SNR_EST1*1000) >> 8);
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* tuner frontend programming */
|
||||
static int bcm3510_tuner_cmd(struct bcm3510_state* st,u8 bc, u16 n, u8 a)
|
||||
{
|
||||
struct bcm3510_hab_cmd_tune c;
|
||||
memset(&c,0,sizeof(struct bcm3510_hab_cmd_tune));
|
||||
|
||||
/* I2C Mode disabled, set 16 control / Data pairs */
|
||||
c.length = 0x10;
|
||||
c.clock_width = 0;
|
||||
/* CS1, CS0, DATA, CLK bits control the tuner RF_AGC_SEL pin is set to
|
||||
* logic high (as Configuration) */
|
||||
c.misc = 0x10;
|
||||
/* Set duration of the initial state of TUNCTL = 3.34 micro Sec */
|
||||
c.TUNCTL_state = 0x40;
|
||||
|
||||
/* PRESCALER DEVIDE RATIO | BC1_2_3_4; (band switch), 1stosc REFERENCE COUNTER REF_S12 and REF_S11 */
|
||||
c.ctl_dat[0].ctrl.size = BITS_8;
|
||||
c.ctl_dat[0].data = 0x80 | bc;
|
||||
|
||||
/* Control DATA pin, 1stosc REFERENCE COUNTER REF_S10 to REF_S3 */
|
||||
c.ctl_dat[1].ctrl.size = BITS_8;
|
||||
c.ctl_dat[1].data = 4;
|
||||
|
||||
/* set CONTROL BIT 1 to 1, 1stosc REFERENCE COUNTER REF_S2 to REF_S1 */
|
||||
c.ctl_dat[2].ctrl.size = BITS_3;
|
||||
c.ctl_dat[2].data = 0x20;
|
||||
|
||||
/* control CS0 pin, pulse byte ? */
|
||||
c.ctl_dat[3].ctrl.size = BITS_3;
|
||||
c.ctl_dat[3].ctrl.clk_off = 1;
|
||||
c.ctl_dat[3].ctrl.cs0 = 1;
|
||||
c.ctl_dat[3].data = 0x40;
|
||||
|
||||
/* PGM_S18 to PGM_S11 */
|
||||
c.ctl_dat[4].ctrl.size = BITS_8;
|
||||
c.ctl_dat[4].data = n >> 3;
|
||||
|
||||
/* PGM_S10 to PGM_S8, SWL_S7 to SWL_S3 */
|
||||
c.ctl_dat[5].ctrl.size = BITS_8;
|
||||
c.ctl_dat[5].data = ((n & 0x7) << 5) | (a >> 2);
|
||||
|
||||
/* SWL_S2 and SWL_S1, set CONTROL BIT 2 to 0 */
|
||||
c.ctl_dat[6].ctrl.size = BITS_3;
|
||||
c.ctl_dat[6].data = (a << 6) & 0xdf;
|
||||
|
||||
/* control CS0 pin, pulse byte ? */
|
||||
c.ctl_dat[7].ctrl.size = BITS_3;
|
||||
c.ctl_dat[7].ctrl.clk_off = 1;
|
||||
c.ctl_dat[7].ctrl.cs0 = 1;
|
||||
c.ctl_dat[7].data = 0x40;
|
||||
|
||||
/* PRESCALER DEVIDE RATIO, 2ndosc REFERENCE COUNTER REF_S12 and REF_S11 */
|
||||
c.ctl_dat[8].ctrl.size = BITS_8;
|
||||
c.ctl_dat[8].data = 0x80;
|
||||
|
||||
/* 2ndosc REFERENCE COUNTER REF_S10 to REF_S3 */
|
||||
c.ctl_dat[9].ctrl.size = BITS_8;
|
||||
c.ctl_dat[9].data = 0x10;
|
||||
|
||||
/* set CONTROL BIT 1 to 1, 2ndosc REFERENCE COUNTER REF_S2 to REF_S1 */
|
||||
c.ctl_dat[10].ctrl.size = BITS_3;
|
||||
c.ctl_dat[10].data = 0x20;
|
||||
|
||||
/* pulse byte */
|
||||
c.ctl_dat[11].ctrl.size = BITS_3;
|
||||
c.ctl_dat[11].ctrl.clk_off = 1;
|
||||
c.ctl_dat[11].ctrl.cs1 = 1;
|
||||
c.ctl_dat[11].data = 0x40;
|
||||
|
||||
/* PGM_S18 to PGM_S11 */
|
||||
c.ctl_dat[12].ctrl.size = BITS_8;
|
||||
c.ctl_dat[12].data = 0x2a;
|
||||
|
||||
/* PGM_S10 to PGM_S8 and SWL_S7 to SWL_S3 */
|
||||
c.ctl_dat[13].ctrl.size = BITS_8;
|
||||
c.ctl_dat[13].data = 0x8e;
|
||||
|
||||
/* SWL_S2 and SWL_S1 and set CONTROL BIT 2 to 0 */
|
||||
c.ctl_dat[14].ctrl.size = BITS_3;
|
||||
c.ctl_dat[14].data = 0;
|
||||
|
||||
/* Pulse Byte */
|
||||
c.ctl_dat[15].ctrl.size = BITS_3;
|
||||
c.ctl_dat[15].ctrl.clk_off = 1;
|
||||
c.ctl_dat[15].ctrl.cs1 = 1;
|
||||
c.ctl_dat[15].data = 0x40;
|
||||
|
||||
return bcm3510_do_hab_cmd(st,CMD_TUNE, MSGID_TUNE,(u8 *) &c,sizeof(c), NULL, 0);
|
||||
}
|
||||
|
||||
static int bcm3510_set_freq(struct bcm3510_state* st,u32 freq)
|
||||
{
|
||||
u8 bc,a;
|
||||
u16 n;
|
||||
s32 YIntercept,Tfvco1;
|
||||
|
||||
freq /= 1000;
|
||||
|
||||
deb_info("%dkHz:",freq);
|
||||
/* set Band Switch */
|
||||
if (freq <= 168000)
|
||||
bc = 0x1c;
|
||||
else if (freq <= 378000)
|
||||
bc = 0x2c;
|
||||
else
|
||||
bc = 0x30;
|
||||
|
||||
if (freq >= 470000) {
|
||||
freq -= 470001;
|
||||
YIntercept = 18805;
|
||||
} else if (freq >= 90000) {
|
||||
freq -= 90001;
|
||||
YIntercept = 15005;
|
||||
} else if (freq >= 76000){
|
||||
freq -= 76001;
|
||||
YIntercept = 14865;
|
||||
} else {
|
||||
freq -= 54001;
|
||||
YIntercept = 14645;
|
||||
}
|
||||
|
||||
Tfvco1 = (((freq/6000)*60 + YIntercept)*4)/10;
|
||||
|
||||
n = Tfvco1 >> 6;
|
||||
a = Tfvco1 & 0x3f;
|
||||
|
||||
deb_info(" BC1_2_3_4: %x, N: %x A: %x\n", bc, n, a);
|
||||
if (n >= 16 && n <= 2047)
|
||||
return bcm3510_tuner_cmd(st,bc,n,a);
|
||||
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static int bcm3510_set_frontend(struct dvb_frontend* fe,
|
||||
struct dvb_frontend_parameters *p)
|
||||
{
|
||||
struct bcm3510_state* st = fe->demodulator_priv;
|
||||
struct bcm3510_hab_cmd_ext_acquire cmd;
|
||||
struct bcm3510_hab_cmd_bert_control bert;
|
||||
int ret;
|
||||
|
||||
memset(&cmd,0,sizeof(cmd));
|
||||
switch (p->u.vsb.modulation) {
|
||||
case QAM_256:
|
||||
cmd.ACQUIRE0.MODE = 0x1;
|
||||
cmd.ACQUIRE1.SYM_RATE = 0x1;
|
||||
cmd.ACQUIRE1.IF_FREQ = 0x1;
|
||||
break;
|
||||
case QAM_64:
|
||||
cmd.ACQUIRE0.MODE = 0x2;
|
||||
cmd.ACQUIRE1.SYM_RATE = 0x2;
|
||||
cmd.ACQUIRE1.IF_FREQ = 0x1;
|
||||
break;
|
||||
/* case QAM_256:
|
||||
cmd.ACQUIRE0.MODE = 0x3;
|
||||
break;
|
||||
case QAM_128:
|
||||
cmd.ACQUIRE0.MODE = 0x4;
|
||||
break;
|
||||
case QAM_64:
|
||||
cmd.ACQUIRE0.MODE = 0x5;
|
||||
break;
|
||||
case QAM_32:
|
||||
cmd.ACQUIRE0.MODE = 0x6;
|
||||
break;
|
||||
case QAM_16:
|
||||
cmd.ACQUIRE0.MODE = 0x7;
|
||||
break;*/
|
||||
case VSB_8:
|
||||
cmd.ACQUIRE0.MODE = 0x8;
|
||||
cmd.ACQUIRE1.SYM_RATE = 0x0;
|
||||
cmd.ACQUIRE1.IF_FREQ = 0x0;
|
||||
break;
|
||||
case VSB_16:
|
||||
cmd.ACQUIRE0.MODE = 0x9;
|
||||
cmd.ACQUIRE1.SYM_RATE = 0x0;
|
||||
cmd.ACQUIRE1.IF_FREQ = 0x0;
|
||||
default:
|
||||
return -EINVAL;
|
||||
};
|
||||
cmd.ACQUIRE0.OFFSET = 0;
|
||||
cmd.ACQUIRE0.NTSCSWEEP = 1;
|
||||
cmd.ACQUIRE0.FA = 1;
|
||||
cmd.ACQUIRE0.BW = 0;
|
||||
|
||||
/* if (enableOffset) {
|
||||
cmd.IF_OFFSET0 = xx;
|
||||
cmd.IF_OFFSET1 = xx;
|
||||
|
||||
cmd.SYM_OFFSET0 = xx;
|
||||
cmd.SYM_OFFSET1 = xx;
|
||||
if (enableNtscSweep) {
|
||||
cmd.NTSC_OFFSET0;
|
||||
cmd.NTSC_OFFSET1;
|
||||
}
|
||||
} */
|
||||
bcm3510_do_hab_cmd(st, CMD_ACQUIRE, MSGID_EXT_TUNER_ACQUIRE, (u8 *) &cmd, sizeof(cmd), NULL, 0);
|
||||
|
||||
/* doing it with different MSGIDs, data book and source differs */
|
||||
bert.BE = 0;
|
||||
bert.unused = 0;
|
||||
bcm3510_do_hab_cmd(st, CMD_STATE_CONTROL, MSGID_BERT_CONTROL, (u8 *) &bert, sizeof(bert), NULL, 0);
|
||||
bcm3510_do_hab_cmd(st, CMD_STATE_CONTROL, MSGID_BERT_SET, (u8 *) &bert, sizeof(bert), NULL, 0);
|
||||
|
||||
bcm3510_bert_reset(st);
|
||||
|
||||
if ((ret = bcm3510_set_freq(st,p->frequency)) < 0)
|
||||
return ret;
|
||||
|
||||
memset(&st->status1,0,sizeof(st->status1));
|
||||
memset(&st->status2,0,sizeof(st->status2));
|
||||
st->status_check_interval = 500;
|
||||
|
||||
/* Give the AP some time */
|
||||
msleep(200);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bcm3510_sleep(struct dvb_frontend* fe)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bcm3510_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *s)
|
||||
{
|
||||
s->min_delay_ms = 1000;
|
||||
s->step_size = 0;
|
||||
s->max_drift = 0;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void bcm3510_release(struct dvb_frontend* fe)
|
||||
{
|
||||
struct bcm3510_state* state = fe->demodulator_priv;
|
||||
kfree(state);
|
||||
}
|
||||
|
||||
/* firmware download:
|
||||
* firmware file is build up like this:
|
||||
* 16bit addr, 16bit length, 8byte of length
|
||||
*/
|
||||
#define BCM3510_DEFAULT_FIRMWARE "dvb-fe-bcm3510-01.fw"
|
||||
|
||||
static int bcm3510_write_ram(struct bcm3510_state *st, u16 addr, u8 *b, u16 len)
|
||||
{
|
||||
int ret = 0,i;
|
||||
bcm3510_register_value vH, vL,vD;
|
||||
|
||||
vH.MADRH_a9 = addr >> 8;
|
||||
vL.MADRL_aa = addr;
|
||||
if ((ret = bcm3510_writeB(st,0xa9,vH)) < 0) return ret;
|
||||
if ((ret = bcm3510_writeB(st,0xaa,vL)) < 0) return ret;
|
||||
|
||||
for (i = 0; i < len; i++) {
|
||||
vD.MDATA_ab = b[i];
|
||||
if ((ret = bcm3510_writeB(st,0xab,vD)) < 0)
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bcm3510_download_firmware(struct dvb_frontend* fe)
|
||||
{
|
||||
struct bcm3510_state* st = fe->demodulator_priv;
|
||||
const struct firmware *fw;
|
||||
u16 addr,len;
|
||||
u8 *b;
|
||||
int ret,i;
|
||||
|
||||
deb_info("requesting firmware\n");
|
||||
if ((ret = st->config->request_firmware(fe, &fw, BCM3510_DEFAULT_FIRMWARE)) < 0) {
|
||||
err("could not load firmware (%s): %d",BCM3510_DEFAULT_FIRMWARE,ret);
|
||||
return ret;
|
||||
}
|
||||
deb_info("got firmware: %d\n",fw->size);
|
||||
|
||||
b = fw->data;
|
||||
for (i = 0; i < fw->size;) {
|
||||
addr = le16_to_cpu( *( (u16 *)&b[i] ) );
|
||||
len = le16_to_cpu( *( (u16 *)&b[i+2] ) );
|
||||
deb_info("firmware chunk, addr: 0x%04x, len: 0x%04x, total length: 0x%04x\n",addr,len,fw->size);
|
||||
if ((ret = bcm3510_write_ram(st,addr,&b[i+4],len)) < 0) {
|
||||
err("firmware download failed: %d\n",ret);
|
||||
return ret;
|
||||
}
|
||||
i += 4 + len;
|
||||
}
|
||||
release_firmware(fw);
|
||||
deb_info("firmware download successfully completed\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bcm3510_check_firmware_version(struct bcm3510_state *st)
|
||||
{
|
||||
struct bcm3510_hab_cmd_get_version_info ver;
|
||||
bcm3510_do_hab_cmd(st,CMD_GET_VERSION_INFO,MSGID_GET_VERSION_INFO,NULL,0,(u8*)&ver,sizeof(ver));
|
||||
|
||||
deb_info("Version information: 0x%02x 0x%02x 0x%02x 0x%02x\n",
|
||||
ver.microcode_version, ver.script_version, ver.config_version, ver.demod_version);
|
||||
|
||||
if (ver.script_version == BCM3510_DEF_SCRIPT_VERSION &&
|
||||
ver.config_version == BCM3510_DEF_CONFIG_VERSION &&
|
||||
ver.demod_version == BCM3510_DEF_DEMOD_VERSION)
|
||||
return 0;
|
||||
|
||||
deb_info("version check failed\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/* (un)resetting the AP */
|
||||
static int bcm3510_reset(struct bcm3510_state *st)
|
||||
{
|
||||
int ret;
|
||||
unsigned long t;
|
||||
bcm3510_register_value v;
|
||||
|
||||
bcm3510_readB(st,0xa0,&v); v.HCTL1_a0.RESET = 1;
|
||||
if ((ret = bcm3510_writeB(st,0xa0,v)) < 0)
|
||||
return ret;
|
||||
|
||||
t = jiffies + 3*HZ;
|
||||
while (time_before(jiffies, t)) {
|
||||
msleep(10);
|
||||
if ((ret = bcm3510_readB(st,0xa2,&v)) < 0)
|
||||
return ret;
|
||||
|
||||
if (v.APSTAT1_a2.RESET)
|
||||
return 0;
|
||||
}
|
||||
deb_info("reset timed out\n");
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
|
||||
static int bcm3510_clear_reset(struct bcm3510_state *st)
|
||||
{
|
||||
bcm3510_register_value v;
|
||||
int ret;
|
||||
unsigned long t;
|
||||
|
||||
v.raw = 0;
|
||||
if ((ret = bcm3510_writeB(st,0xa0,v)) < 0)
|
||||
return ret;
|
||||
|
||||
t = jiffies + 3*HZ;
|
||||
while (time_before(jiffies, t)) {
|
||||
msleep(10);
|
||||
if ((ret = bcm3510_readB(st,0xa2,&v)) < 0)
|
||||
return ret;
|
||||
|
||||
/* verify that reset is cleared */
|
||||
if (!v.APSTAT1_a2.RESET)
|
||||
return 0;
|
||||
}
|
||||
deb_info("reset clear timed out\n");
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
|
||||
static int bcm3510_init_cold(struct bcm3510_state *st)
|
||||
{
|
||||
int ret;
|
||||
bcm3510_register_value v;
|
||||
|
||||
/* read Acquisation Processor status register and check it is not in RUN mode */
|
||||
if ((ret = bcm3510_readB(st,0xa2,&v)) < 0)
|
||||
return ret;
|
||||
if (v.APSTAT1_a2.RUN) {
|
||||
deb_info("AP is already running - firmware already loaded.\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
deb_info("reset?\n");
|
||||
if ((ret = bcm3510_reset(st)) < 0)
|
||||
return ret;
|
||||
|
||||
deb_info("tristate?\n");
|
||||
/* tri-state */
|
||||
v.TSTCTL_2e.CTL = 0;
|
||||
if ((ret = bcm3510_writeB(st,0x2e,v)) < 0)
|
||||
return ret;
|
||||
|
||||
deb_info("firmware?\n");
|
||||
if ((ret = bcm3510_download_firmware(&st->frontend)) < 0 ||
|
||||
(ret = bcm3510_clear_reset(st)) < 0)
|
||||
return ret;
|
||||
|
||||
/* anything left here to Let the acquisition processor begin execution at program counter 0000 ??? */
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bcm3510_init(struct dvb_frontend* fe)
|
||||
{
|
||||
struct bcm3510_state* st = fe->demodulator_priv;
|
||||
bcm3510_register_value j;
|
||||
struct bcm3510_hab_cmd_set_agc c;
|
||||
int ret;
|
||||
|
||||
if ((ret = bcm3510_readB(st,0xca,&j)) < 0)
|
||||
return ret;
|
||||
|
||||
deb_info("JDEC: %02x\n",j.raw);
|
||||
|
||||
switch (j.JDEC_ca.JDEC) {
|
||||
case JDEC_WAIT_AT_RAM:
|
||||
deb_info("attempting to download firmware\n");
|
||||
if ((ret = bcm3510_init_cold(st)) < 0)
|
||||
return ret;
|
||||
case JDEC_EEPROM_LOAD_WAIT: /* fall-through is wanted */
|
||||
deb_info("firmware is loaded\n");
|
||||
bcm3510_check_firmware_version(st);
|
||||
break;
|
||||
default:
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
memset(&c,0,1);
|
||||
c.SEL = 1;
|
||||
bcm3510_do_hab_cmd(st,CMD_AUTO_PARAM,MSGID_SET_RF_AGC_SEL,(u8 *)&c,sizeof(c),NULL,0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
static struct dvb_frontend_ops bcm3510_ops;
|
||||
|
||||
struct dvb_frontend* bcm3510_attach(const struct bcm3510_config *config,
|
||||
struct i2c_adapter *i2c)
|
||||
{
|
||||
struct bcm3510_state* state = NULL;
|
||||
int ret;
|
||||
bcm3510_register_value v;
|
||||
|
||||
/* allocate memory for the internal state */
|
||||
state = kmalloc(sizeof(struct bcm3510_state), GFP_KERNEL);
|
||||
if (state == NULL)
|
||||
goto error;
|
||||
memset(state,0,sizeof(struct bcm3510_state));
|
||||
|
||||
/* setup the state */
|
||||
|
||||
state->config = config;
|
||||
state->i2c = i2c;
|
||||
memcpy(&state->ops, &bcm3510_ops, sizeof(struct dvb_frontend_ops));
|
||||
|
||||
/* create dvb_frontend */
|
||||
state->frontend.ops = &state->ops;
|
||||
state->frontend.demodulator_priv = state;
|
||||
|
||||
sema_init(&state->hab_sem, 1);
|
||||
|
||||
if ((ret = bcm3510_readB(state,0xe0,&v)) < 0)
|
||||
goto error;
|
||||
|
||||
deb_info("Revision: 0x%1x, Layer: 0x%1x.\n",v.REVID_e0.REV,v.REVID_e0.LAYER);
|
||||
|
||||
if ((v.REVID_e0.REV != 0x1 && v.REVID_e0.LAYER != 0xb) && /* cold */
|
||||
(v.REVID_e0.REV != 0x8 && v.REVID_e0.LAYER != 0x0)) /* warm */
|
||||
goto error;
|
||||
|
||||
info("Revision: 0x%1x, Layer: 0x%1x.",v.REVID_e0.REV,v.REVID_e0.LAYER);
|
||||
|
||||
bcm3510_reset(state);
|
||||
|
||||
return &state->frontend;
|
||||
|
||||
error:
|
||||
kfree(state);
|
||||
return NULL;
|
||||
}
|
||||
EXPORT_SYMBOL(bcm3510_attach);
|
||||
|
||||
static struct dvb_frontend_ops bcm3510_ops = {
|
||||
|
||||
.info = {
|
||||
.name = "Broadcom BCM3510 VSB/QAM frontend",
|
||||
.type = FE_ATSC,
|
||||
.frequency_min = 54000000,
|
||||
.frequency_max = 803000000,
|
||||
/* stepsize is just a guess */
|
||||
.frequency_stepsize = 0,
|
||||
.caps =
|
||||
FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
|
||||
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
|
||||
FE_CAN_8VSB | FE_CAN_16VSB |
|
||||
FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_128 | FE_CAN_QAM_256
|
||||
},
|
||||
|
||||
.release = bcm3510_release,
|
||||
|
||||
.init = bcm3510_init,
|
||||
.sleep = bcm3510_sleep,
|
||||
|
||||
.set_frontend = bcm3510_set_frontend,
|
||||
.get_tune_settings = bcm3510_get_tune_settings,
|
||||
|
||||
.read_status = bcm3510_read_status,
|
||||
.read_ber = bcm3510_read_ber,
|
||||
.read_signal_strength = bcm3510_read_signal_strength,
|
||||
.read_snr = bcm3510_read_snr,
|
||||
.read_ucblocks = bcm3510_read_unc,
|
||||
};
|
||||
|
||||
MODULE_DESCRIPTION("Broadcom BCM3510 ATSC (8VSB/16VSB & ITU J83 AnnexB FEC QAM64/256) demodulator driver");
|
||||
MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
|
@ -0,0 +1,40 @@
|
|||
/*
|
||||
* Support for the Broadcom BCM3510 ATSC demodulator (1st generation Air2PC)
|
||||
*
|
||||
* Copyright (C) 2001-5, B2C2 inc.
|
||||
*
|
||||
* GPL/Linux driver written by Patrick Boettcher <patrick.boettcher@desy.de>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
#ifndef BCM3510_H
|
||||
#define BCM3510_H
|
||||
|
||||
#include <linux/dvb/frontend.h>
|
||||
#include <linux/firmware.h>
|
||||
|
||||
struct bcm3510_config
|
||||
{
|
||||
/* the demodulator's i2c address */
|
||||
u8 demod_address;
|
||||
|
||||
/* request firmware for device */
|
||||
int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
|
||||
};
|
||||
|
||||
extern struct dvb_frontend* bcm3510_attach(const struct bcm3510_config* config,
|
||||
struct i2c_adapter* i2c);
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,460 @@
|
|||
/*
|
||||
* Support for the Broadcom BCM3510 ATSC demodulator (1st generation Air2PC)
|
||||
*
|
||||
* Copyright (C) 2001-5, B2C2 inc.
|
||||
*
|
||||
* GPL/Linux driver written by Patrick Boettcher <patrick.boettcher@desy.de>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
#ifndef __BCM3510_PRIV_H__
|
||||
#define __BCM3510_PRIV_H__
|
||||
|
||||
#define PACKED __attribute__((packed))
|
||||
|
||||
#undef err
|
||||
#define err(format, arg...) printk(KERN_ERR "bcm3510: " format "\n" , ## arg)
|
||||
#undef info
|
||||
#define info(format, arg...) printk(KERN_INFO "bcm3510: " format "\n" , ## arg)
|
||||
#undef warn
|
||||
#define warn(format, arg...) printk(KERN_WARNING "bcm3510: " format "\n" , ## arg)
|
||||
|
||||
|
||||
#define PANASONIC_FIRST_IF_BASE_IN_KHz 1407500
|
||||
#define BCM3510_SYMBOL_RATE 5381000
|
||||
|
||||
typedef union {
|
||||
u8 raw;
|
||||
|
||||
struct {
|
||||
u8 CTL :8;
|
||||
} TSTCTL_2e;
|
||||
|
||||
u8 LDCERC_4e;
|
||||
u8 LDUERC_4f;
|
||||
u8 LD_BER0_65;
|
||||
u8 LD_BER1_66;
|
||||
u8 LD_BER2_67;
|
||||
u8 LD_BER3_68;
|
||||
|
||||
struct {
|
||||
u8 RESET :1;
|
||||
u8 IDLE :1;
|
||||
u8 STOP :1;
|
||||
u8 HIRQ0 :1;
|
||||
u8 HIRQ1 :1;
|
||||
u8 na0 :1;
|
||||
u8 HABAV :1;
|
||||
u8 na1 :1;
|
||||
} HCTL1_a0;
|
||||
|
||||
struct {
|
||||
u8 na0 :1;
|
||||
u8 IDLMSK :1;
|
||||
u8 STMSK :1;
|
||||
u8 I0MSK :1;
|
||||
u8 I1MSK :1;
|
||||
u8 na1 :1;
|
||||
u8 HABMSK :1;
|
||||
u8 na2 :1;
|
||||
} HCTLMSK_a1;
|
||||
|
||||
struct {
|
||||
u8 RESET :1;
|
||||
u8 IDLE :1;
|
||||
u8 STOP :1;
|
||||
u8 RUN :1;
|
||||
u8 HABAV :1;
|
||||
u8 MEMAV :1;
|
||||
u8 ALDONE :1;
|
||||
u8 REIRQ :1;
|
||||
} APSTAT1_a2;
|
||||
|
||||
struct {
|
||||
u8 RSTMSK :1;
|
||||
u8 IMSK :1;
|
||||
u8 SMSK :1;
|
||||
u8 RMSK :1;
|
||||
u8 HABMSK :1;
|
||||
u8 MAVMSK :1;
|
||||
u8 ALDMSK :1;
|
||||
u8 REMSK :1;
|
||||
} APMSK1_a3;
|
||||
|
||||
u8 APSTAT2_a4;
|
||||
u8 APMSK2_a5;
|
||||
|
||||
struct {
|
||||
u8 HABADR :7;
|
||||
u8 na :1;
|
||||
} HABADR_a6;
|
||||
|
||||
u8 HABDATA_a7;
|
||||
|
||||
struct {
|
||||
u8 HABR :1;
|
||||
u8 LDHABR :1;
|
||||
u8 APMSK :1;
|
||||
u8 HMSK :1;
|
||||
u8 LDMSK :1;
|
||||
u8 na :3;
|
||||
} HABSTAT_a8;
|
||||
|
||||
u8 MADRH_a9;
|
||||
u8 MADRL_aa;
|
||||
u8 MDATA_ab;
|
||||
|
||||
struct {
|
||||
#define JDEC_WAIT_AT_RAM 0x7
|
||||
#define JDEC_EEPROM_LOAD_WAIT 0x4
|
||||
u8 JDEC :3;
|
||||
u8 na :5;
|
||||
} JDEC_ca;
|
||||
|
||||
struct {
|
||||
u8 REV :4;
|
||||
u8 LAYER :4;
|
||||
} REVID_e0;
|
||||
|
||||
struct {
|
||||
u8 unk0 :1;
|
||||
u8 CNTCTL :1;
|
||||
u8 BITCNT :1;
|
||||
u8 unk1 :1;
|
||||
u8 RESYNC :1;
|
||||
u8 unk2 :3;
|
||||
} BERCTL_fa;
|
||||
|
||||
struct {
|
||||
u8 CSEL0 :1;
|
||||
u8 CLKED0 :1;
|
||||
u8 CSEL1 :1;
|
||||
u8 CLKED1 :1;
|
||||
u8 CLKLEV :1;
|
||||
u8 SPIVAR :1;
|
||||
u8 na :2;
|
||||
} TUNSET_fc;
|
||||
|
||||
struct {
|
||||
u8 CLK :1;
|
||||
u8 DATA :1;
|
||||
u8 CS0 :1;
|
||||
u8 CS1 :1;
|
||||
u8 AGCSEL :1;
|
||||
u8 na0 :1;
|
||||
u8 TUNSEL :1;
|
||||
u8 na1 :1;
|
||||
} TUNCTL_fd;
|
||||
|
||||
u8 TUNSEL0_fe;
|
||||
u8 TUNSEL1_ff;
|
||||
|
||||
} bcm3510_register_value;
|
||||
|
||||
/* HAB commands */
|
||||
|
||||
/* version */
|
||||
#define CMD_GET_VERSION_INFO 0x3D
|
||||
#define MSGID_GET_VERSION_INFO 0x15
|
||||
struct bcm3510_hab_cmd_get_version_info {
|
||||
u8 microcode_version;
|
||||
u8 script_version;
|
||||
u8 config_version;
|
||||
u8 demod_version;
|
||||
} PACKED;
|
||||
|
||||
#define BCM3510_DEF_MICROCODE_VERSION 0x0E
|
||||
#define BCM3510_DEF_SCRIPT_VERSION 0x06
|
||||
#define BCM3510_DEF_CONFIG_VERSION 0x01
|
||||
#define BCM3510_DEF_DEMOD_VERSION 0xB1
|
||||
|
||||
/* acquire */
|
||||
#define CMD_ACQUIRE 0x38
|
||||
|
||||
#define MSGID_EXT_TUNER_ACQUIRE 0x0A
|
||||
struct bcm3510_hab_cmd_ext_acquire {
|
||||
struct {
|
||||
u8 MODE :4;
|
||||
u8 BW :1;
|
||||
u8 FA :1;
|
||||
u8 NTSCSWEEP :1;
|
||||
u8 OFFSET :1;
|
||||
} PACKED ACQUIRE0; /* control_byte */
|
||||
|
||||
struct {
|
||||
u8 IF_FREQ :3;
|
||||
u8 zero0 :1;
|
||||
u8 SYM_RATE :3;
|
||||
u8 zero1 :1;
|
||||
} PACKED ACQUIRE1; /* sym_if */
|
||||
|
||||
u8 IF_OFFSET0; /* IF_Offset_10hz */
|
||||
u8 IF_OFFSET1;
|
||||
u8 SYM_OFFSET0; /* SymbolRateOffset */
|
||||
u8 SYM_OFFSET1;
|
||||
u8 NTSC_OFFSET0; /* NTSC_Offset_10hz */
|
||||
u8 NTSC_OFFSET1;
|
||||
} PACKED;
|
||||
|
||||
#define MSGID_INT_TUNER_ACQUIRE 0x0B
|
||||
struct bcm3510_hab_cmd_int_acquire {
|
||||
struct {
|
||||
u8 MODE :4;
|
||||
u8 BW :1;
|
||||
u8 FA :1;
|
||||
u8 NTSCSWEEP :1;
|
||||
u8 OFFSET :1;
|
||||
} PACKED ACQUIRE0; /* control_byte */
|
||||
|
||||
struct {
|
||||
u8 IF_FREQ :3;
|
||||
u8 zero0 :1;
|
||||
u8 SYM_RATE :3;
|
||||
u8 zero1 :1;
|
||||
} PACKED ACQUIRE1; /* sym_if */
|
||||
|
||||
u8 TUNER_FREQ0;
|
||||
u8 TUNER_FREQ1;
|
||||
u8 TUNER_FREQ2;
|
||||
u8 TUNER_FREQ3;
|
||||
u8 IF_OFFSET0; /* IF_Offset_10hz */
|
||||
u8 IF_OFFSET1;
|
||||
u8 SYM_OFFSET0; /* SymbolRateOffset */
|
||||
u8 SYM_OFFSET1;
|
||||
u8 NTSC_OFFSET0; /* NTSC_Offset_10hz */
|
||||
u8 NTSC_OFFSET1;
|
||||
} PACKED;
|
||||
|
||||
/* modes */
|
||||
#define BCM3510_QAM16 = 0x01
|
||||
#define BCM3510_QAM32 = 0x02
|
||||
#define BCM3510_QAM64 = 0x03
|
||||
#define BCM3510_QAM128 = 0x04
|
||||
#define BCM3510_QAM256 = 0x05
|
||||
#define BCM3510_8VSB = 0x0B
|
||||
#define BCM3510_16VSB = 0x0D
|
||||
|
||||
/* IF_FREQS */
|
||||
#define BCM3510_IF_TERRESTRIAL 0x0
|
||||
#define BCM3510_IF_CABLE 0x1
|
||||
#define BCM3510_IF_USE_CMD 0x7
|
||||
|
||||
/* SYM_RATE */
|
||||
#define BCM3510_SR_8VSB 0x0 /* 5381119 s/sec */
|
||||
#define BCM3510_SR_256QAM 0x1 /* 5360537 s/sec */
|
||||
#define BCM3510_SR_16QAM 0x2 /* 5056971 s/sec */
|
||||
#define BCM3510_SR_MISC 0x3 /* 5000000 s/sec */
|
||||
#define BCM3510_SR_USE_CMD 0x7
|
||||
|
||||
/* special symbol rate */
|
||||
#define CMD_SET_VALUE_NOT_LISTED 0x2d
|
||||
#define MSGID_SET_SYMBOL_RATE_NOT_LISTED 0x0c
|
||||
struct bcm3510_hab_cmd_set_sr_not_listed {
|
||||
u8 HOST_SYM_RATE0;
|
||||
u8 HOST_SYM_RATE1;
|
||||
u8 HOST_SYM_RATE2;
|
||||
u8 HOST_SYM_RATE3;
|
||||
} PACKED;
|
||||
|
||||
/* special IF */
|
||||
#define MSGID_SET_IF_FREQ_NOT_LISTED 0x0d
|
||||
struct bcm3510_hab_cmd_set_if_freq_not_listed {
|
||||
u8 HOST_IF_FREQ0;
|
||||
u8 HOST_IF_FREQ1;
|
||||
u8 HOST_IF_FREQ2;
|
||||
u8 HOST_IF_FREQ3;
|
||||
} PACKED;
|
||||
|
||||
/* auto reacquire */
|
||||
#define CMD_AUTO_PARAM 0x2a
|
||||
#define MSGID_AUTO_REACQUIRE 0x0e
|
||||
struct bcm3510_hab_cmd_auto_reacquire {
|
||||
u8 ACQ :1; /* on/off*/
|
||||
u8 unused :7;
|
||||
} PACKED;
|
||||
|
||||
#define MSGID_SET_RF_AGC_SEL 0x12
|
||||
struct bcm3510_hab_cmd_set_agc {
|
||||
u8 LVL :1;
|
||||
u8 unused :6;
|
||||
u8 SEL :1;
|
||||
} PACKED;
|
||||
|
||||
#define MSGID_SET_AUTO_INVERSION 0x14
|
||||
struct bcm3510_hab_cmd_auto_inversion {
|
||||
u8 AI :1;
|
||||
u8 unused :7;
|
||||
} PACKED;
|
||||
|
||||
|
||||
/* bert control */
|
||||
#define CMD_STATE_CONTROL 0x12
|
||||
#define MSGID_BERT_CONTROL 0x0e
|
||||
#define MSGID_BERT_SET 0xfa
|
||||
struct bcm3510_hab_cmd_bert_control {
|
||||
u8 BE :1;
|
||||
u8 unused :7;
|
||||
} PACKED;
|
||||
|
||||
#define MSGID_TRI_STATE 0x2e
|
||||
struct bcm3510_hab_cmd_tri_state {
|
||||
u8 RE :1; /* a/d ram port pins */
|
||||
u8 PE :1; /* baud clock pin */
|
||||
u8 AC :1; /* a/d clock pin */
|
||||
u8 BE :1; /* baud clock pin */
|
||||
u8 unused :4;
|
||||
} PACKED;
|
||||
|
||||
|
||||
/* tune */
|
||||
#define CMD_TUNE 0x38
|
||||
#define MSGID_TUNE 0x16
|
||||
struct bcm3510_hab_cmd_tune_ctrl_data_pair {
|
||||
struct {
|
||||
#define BITS_8 0x07
|
||||
#define BITS_7 0x06
|
||||
#define BITS_6 0x05
|
||||
#define BITS_5 0x04
|
||||
#define BITS_4 0x03
|
||||
#define BITS_3 0x02
|
||||
#define BITS_2 0x01
|
||||
#define BITS_1 0x00
|
||||
u8 size :3;
|
||||
u8 unk :2;
|
||||
u8 clk_off :1;
|
||||
u8 cs0 :1;
|
||||
u8 cs1 :1;
|
||||
|
||||
} PACKED ctrl;
|
||||
|
||||
u8 data;
|
||||
} PACKED;
|
||||
|
||||
struct bcm3510_hab_cmd_tune {
|
||||
u8 length;
|
||||
u8 clock_width;
|
||||
u8 misc;
|
||||
u8 TUNCTL_state;
|
||||
|
||||
struct bcm3510_hab_cmd_tune_ctrl_data_pair ctl_dat[16];
|
||||
} PACKED;
|
||||
|
||||
#define CMD_STATUS 0x38
|
||||
#define MSGID_STATUS1 0x08
|
||||
struct bcm3510_hab_cmd_status1 {
|
||||
struct {
|
||||
u8 EQ_MODE :4;
|
||||
u8 reserved :2;
|
||||
u8 QRE :1; /* if QSE and the spectrum is inversed */
|
||||
u8 QSE :1; /* automatic spectral inversion */
|
||||
} PACKED STATUS0;
|
||||
|
||||
struct {
|
||||
u8 RECEIVER_LOCK :1;
|
||||
u8 FEC_LOCK :1;
|
||||
u8 OUT_PLL_LOCK :1;
|
||||
u8 reserved :5;
|
||||
} PACKED STATUS1;
|
||||
|
||||
struct {
|
||||
u8 reserved :2;
|
||||
u8 BW :1;
|
||||
u8 NTE :1; /* NTSC filter sweep enabled */
|
||||
u8 AQI :1; /* currently acquiring */
|
||||
u8 FA :1; /* fast acquisition */
|
||||
u8 ARI :1; /* auto reacquire */
|
||||
u8 TI :1; /* programming the tuner */
|
||||
} PACKED STATUS2;
|
||||
u8 STATUS3;
|
||||
u8 SNR_EST0;
|
||||
u8 SNR_EST1;
|
||||
u8 TUNER_FREQ0;
|
||||
u8 TUNER_FREQ1;
|
||||
u8 TUNER_FREQ2;
|
||||
u8 TUNER_FREQ3;
|
||||
u8 SYM_RATE0;
|
||||
u8 SYM_RATE1;
|
||||
u8 SYM_RATE2;
|
||||
u8 SYM_RATE3;
|
||||
u8 SYM_OFFSET0;
|
||||
u8 SYM_OFFSET1;
|
||||
u8 SYM_ERROR0;
|
||||
u8 SYM_ERROR1;
|
||||
u8 IF_FREQ0;
|
||||
u8 IF_FREQ1;
|
||||
u8 IF_FREQ2;
|
||||
u8 IF_FREQ3;
|
||||
u8 IF_OFFSET0;
|
||||
u8 IF_OFFSET1;
|
||||
u8 IF_ERROR0;
|
||||
u8 IF_ERROR1;
|
||||
u8 NTSC_FILTER0;
|
||||
u8 NTSC_FILTER1;
|
||||
u8 NTSC_FILTER2;
|
||||
u8 NTSC_FILTER3;
|
||||
u8 NTSC_OFFSET0;
|
||||
u8 NTSC_OFFSET1;
|
||||
u8 NTSC_ERROR0;
|
||||
u8 NTSC_ERROR1;
|
||||
u8 INT_AGC_LEVEL0;
|
||||
u8 INT_AGC_LEVEL1;
|
||||
u8 EXT_AGC_LEVEL0;
|
||||
u8 EXT_AGC_LEVEL1;
|
||||
} PACKED;
|
||||
|
||||
#define MSGID_STATUS2 0x14
|
||||
struct bcm3510_hab_cmd_status2 {
|
||||
struct {
|
||||
u8 EQ_MODE :4;
|
||||
u8 reserved :2;
|
||||
u8 QRE :1;
|
||||
u8 QSR :1;
|
||||
} PACKED STATUS0;
|
||||
struct {
|
||||
u8 RL :1;
|
||||
u8 FL :1;
|
||||
u8 OL :1;
|
||||
u8 reserved :5;
|
||||
} PACKED STATUS1;
|
||||
u8 SYMBOL_RATE0;
|
||||
u8 SYMBOL_RATE1;
|
||||
u8 SYMBOL_RATE2;
|
||||
u8 SYMBOL_RATE3;
|
||||
u8 LDCERC0;
|
||||
u8 LDCERC1;
|
||||
u8 LDCERC2;
|
||||
u8 LDCERC3;
|
||||
u8 LDUERC0;
|
||||
u8 LDUERC1;
|
||||
u8 LDUERC2;
|
||||
u8 LDUERC3;
|
||||
u8 LDBER0;
|
||||
u8 LDBER1;
|
||||
u8 LDBER2;
|
||||
u8 LDBER3;
|
||||
struct {
|
||||
u8 MODE_TYPE :4; /* acquire mode 0 */
|
||||
u8 reservd :4;
|
||||
} MODE_TYPE;
|
||||
u8 SNR_EST0;
|
||||
u8 SNR_EST1;
|
||||
u8 SIGNAL;
|
||||
} PACKED;
|
||||
|
||||
#define CMD_SET_RF_BW_NOT_LISTED 0x3f
|
||||
#define MSGID_SET_RF_BW_NOT_LISTED 0x11
|
||||
/* TODO */
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue