diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h index 68d0d453eb06..b7b0eb104430 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h @@ -819,6 +819,7 @@ struct sge { u16 nqs_per_uld; /* # of Rx queues per ULD */ u16 timer_val[SGE_NTIMERS]; u8 counter_val[SGE_NCOUNTERS]; + u16 dbqtimer_tick; u16 dbqtimer_val[SGE_NDBQTIMERS]; u32 fl_pg_order; /* large page allocation size */ u32 stat_len; /* length of status page at ring end */ diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c index 796043544fc3..65b8dc706c1d 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c @@ -932,11 +932,190 @@ static int get_adaptive_rx_setting(struct net_device *dev) return q->rspq.adaptive_rx; } -static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c) +/* Return the current global Adapter SGE Doorbell Queue Timer Tick for all + * Ethernet TX Queues. + */ +static int get_dbqtimer_tick(struct net_device *dev) { - set_adaptive_rx_setting(dev, c->use_adaptive_rx_coalesce); - return set_rx_intr_params(dev, c->rx_coalesce_usecs, - c->rx_max_coalesced_frames); + struct port_info *pi = netdev_priv(dev); + struct adapter *adap = pi->adapter; + + if (!(adap->flags & SGE_DBQ_TIMER)) + return 0; + + return adap->sge.dbqtimer_tick; +} + +/* Return the SGE Doorbell Queue Timer Value for the Ethernet TX Queues + * associated with a Network Device. + */ +static int get_dbqtimer(struct net_device *dev) +{ + struct port_info *pi = netdev_priv(dev); + struct adapter *adap = pi->adapter; + struct sge_eth_txq *txq; + + txq = &adap->sge.ethtxq[pi->first_qset]; + + if (!(adap->flags & SGE_DBQ_TIMER)) + return 0; + + /* all of the TX Queues use the same Timer Index */ + return adap->sge.dbqtimer_val[txq->dbqtimerix]; +} + +/* Set the global Adapter SGE Doorbell Queue Timer Tick for all Ethernet TX + * Queues. This is the fundamental "Tick" that sets the scale of values which + * can be used. Individual Ethernet TX Queues index into a relatively small + * array of Tick Multipliers. Changing the base Tick will thus change all of + * the resulting Timer Values associated with those multipliers for all + * Ethernet TX Queues. + */ +static int set_dbqtimer_tick(struct net_device *dev, int usecs) +{ + struct port_info *pi = netdev_priv(dev); + struct adapter *adap = pi->adapter; + struct sge *s = &adap->sge; + u32 param, val; + int ret; + + if (!(adap->flags & SGE_DBQ_TIMER)) + return 0; + + /* return early if it's the same Timer Tick we're already using */ + if (s->dbqtimer_tick == usecs) + return 0; + + /* attempt to set the new Timer Tick value */ + param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_DBQ_TIMERTICK)); + val = usecs; + ret = t4_set_params(adap, adap->mbox, adap->pf, 0, 1, ¶m, &val); + if (ret) + return ret; + s->dbqtimer_tick = usecs; + + /* if successful, reread resulting dependent Timer values */ + ret = t4_read_sge_dbqtimers(adap, ARRAY_SIZE(s->dbqtimer_val), + s->dbqtimer_val); + return ret; +} + +/* Set the SGE Doorbell Queue Timer Value for the Ethernet TX Queues + * associated with a Network Device. There is a relatively small array of + * possible Timer Values so we need to pick the closest value available. + */ +static int set_dbqtimer(struct net_device *dev, int usecs) +{ + int qix, timerix, min_timerix, delta, min_delta; + struct port_info *pi = netdev_priv(dev); + struct adapter *adap = pi->adapter; + struct sge *s = &adap->sge; + struct sge_eth_txq *txq; + u32 param, val; + int ret; + + if (!(adap->flags & SGE_DBQ_TIMER)) + return 0; + + /* Find the SGE Doorbell Timer Value that's closest to the requested + * value. + */ + min_delta = INT_MAX; + min_timerix = 0; + for (timerix = 0; timerix < ARRAY_SIZE(s->dbqtimer_val); timerix++) { + delta = s->dbqtimer_val[timerix] - usecs; + if (delta < 0) + delta = -delta; + if (delta < min_delta) { + min_delta = delta; + min_timerix = timerix; + } + } + + /* Return early if it's the same Timer Index we're already using. + * We use the same Timer Index for all of the TX Queues for an + * interface so it's only necessary to check the first one. + */ + txq = &s->ethtxq[pi->first_qset]; + if (txq->dbqtimerix == min_timerix) + return 0; + + for (qix = 0; qix < pi->nqsets; qix++, txq++) { + if (adap->flags & FULL_INIT_DONE) { + param = + (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DMAQ) | + FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DMAQ_EQ_TIMERIX) | + FW_PARAMS_PARAM_YZ_V(txq->q.cntxt_id)); + val = min_timerix; + ret = t4_set_params(adap, adap->mbox, adap->pf, 0, + 1, ¶m, &val); + if (ret) + return ret; + } + txq->dbqtimerix = min_timerix; + } + return 0; +} + +/* Set the global Adapter SGE Doorbell Queue Timer Tick for all Ethernet TX + * Queues and the Timer Value for the Ethernet TX Queues associated with a + * Network Device. Since changing the global Tick changes all of the + * available Timer Values, we need to do this first before selecting the + * resulting closest Timer Value. Moreover, since the Tick is global, + * changing it affects the Timer Values for all Network Devices on the + * adapter. So, before changing the Tick, we grab all of the current Timer + * Values for other Network Devices on this Adapter and then attempt to select + * new Timer Values which are close to the old values ... + */ +static int set_dbqtimer_tickval(struct net_device *dev, + int tick_usecs, int timer_usecs) +{ + struct port_info *pi = netdev_priv(dev); + struct adapter *adap = pi->adapter; + int timer[MAX_NPORTS]; + unsigned int port; + int ret; + + /* Grab the other adapter Network Interface current timers and fill in + * the new one for this Network Interface. + */ + for_each_port(adap, port) + if (port == pi->port_id) + timer[port] = timer_usecs; + else + timer[port] = get_dbqtimer(adap->port[port]); + + /* Change the global Tick first ... */ + ret = set_dbqtimer_tick(dev, tick_usecs); + if (ret) + return ret; + + /* ... and then set all of the Network Interface Timer Values ... */ + for_each_port(adap, port) { + ret = set_dbqtimer(adap->port[port], timer[port]); + if (ret) + return ret; + } + + return 0; +} + +static int set_coalesce(struct net_device *dev, + struct ethtool_coalesce *coalesce) +{ + int ret; + + set_adaptive_rx_setting(dev, coalesce->use_adaptive_rx_coalesce); + + ret = set_rx_intr_params(dev, coalesce->rx_coalesce_usecs, + coalesce->rx_max_coalesced_frames); + if (ret) + return ret; + + return set_dbqtimer_tickval(dev, + coalesce->tx_coalesce_usecs_irq, + coalesce->tx_coalesce_usecs); } static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c) @@ -949,6 +1128,8 @@ static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c) c->rx_max_coalesced_frames = (rq->intr_params & QINTR_CNT_EN_F) ? adap->sge.counter_val[rq->pktcnt_idx] : 0; c->use_adaptive_rx_coalesce = get_adaptive_rx_setting(dev); + c->tx_coalesce_usecs_irq = get_dbqtimer_tick(dev); + c->tx_coalesce_usecs = get_dbqtimer(dev); return 0; } diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index bdd11a617579..bcbac247a73d 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -4331,8 +4331,18 @@ static int adap_init0(struct adapter *adap) /* Grab the SGE Doorbell Queue Timer values. If successful, that * indicates that the Firmware and Hardware support this. */ - ret = t4_read_sge_dbqtimers(adap, ARRAY_SIZE(adap->sge.dbqtimer_val), - adap->sge.dbqtimer_val); + params[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_DBQ_TIMERTICK)); + ret = t4_query_params(adap, adap->mbox, adap->pf, 0, + 1, params, val); + + if (!ret) { + adap->sge.dbqtimer_tick = val[0]; + ret = t4_read_sge_dbqtimers(adap, + ARRAY_SIZE(adap->sge.dbqtimer_val), + adap->sge.dbqtimer_val); + } + if (!ret) adap->flags |= SGE_DBQ_TIMER;