diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index dba50deb7e9a..c1c550f2a517 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1050,7 +1050,7 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ohci_hcd_at91_driver
 #endif
 
-#ifdef CONFIG_ARCH_PNX4008
+#if defined(CONFIG_ARCH_PNX4008) || defined(CONFIG_ARCH_LPC32XX)
 #include "ohci-nxp.c"
 #define PLATFORM_DRIVER		usb_hcd_nxp_driver
 #endif
diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c
index a12c6b40472e..e7cc7b633214 100644
--- a/drivers/usb/host/ohci-nxp.c
+++ b/drivers/usb/host/ohci-nxp.c
@@ -3,6 +3,7 @@
  *
  * Currently supported OHCI host devices:
  * - Philips PNX4008
+ * - NXP LPC32xx
  *
  * Authors: Dmitry Chigirev <source@mvista.com>
  *	    Vitaly Wool <vitalywool@gmail.com>
@@ -23,20 +24,24 @@
 #include <linux/i2c.h>
 
 #include <mach/hardware.h>
+#include <asm/mach-types.h>
 #include <asm/io.h>
 
 #include <mach/platform.h>
 #include <mach/irqs.h>
 #include <asm/gpio.h>
 
-#define USB_CTRL	IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
+#define USB_CONFIG_BASE		0x31020000
+#define PWRMAN_BASE		0x40004000
+
+#define USB_CTRL		IO_ADDRESS(PWRMAN_BASE + 0x64)
 
 /* USB_CTRL bit defines */
 #define USB_SLAVE_HCLK_EN	(1 << 24)
 #define USB_HOST_NEED_CLK_EN	(1 << 21)
 
-#define USB_OTG_CLK_CTRL	IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xFF4)
-#define USB_OTG_CLK_STAT	IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xFF8)
+#define USB_OTG_CLK_CTRL	IO_ADDRESS(USB_CONFIG_BASE + 0xFF4)
+#define USB_OTG_CLK_STAT	IO_ADDRESS(USB_CONFIG_BASE + 0xFF8)
 
 /* USB_OTG_CLK_CTRL bit defines */
 #define AHB_M_CLOCK_ON		(1 << 4)
@@ -45,7 +50,7 @@
 #define DEV_CLOCK_ON		(1 << 1)
 #define HOST_CLOCK_ON		(1 << 0)
 
-#define USB_OTG_STAT_CONTROL	IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0x110)
+#define USB_OTG_STAT_CONTROL	IO_ADDRESS(USB_CONFIG_BASE + 0x110)
 
 /* USB_OTG_STAT_CONTROL bit defines */
 #define TRANSPARENT_I2C_EN	(1 << 7)
@@ -99,6 +104,15 @@
 #define ISP1301_I2C_INTERRUPT_RISING 0xE
 #define ISP1301_I2C_REG_CLEAR_ADDR 1
 
+/* On LPC32xx, those are undefined */
+#ifndef start_int_set_falling_edge
+#define start_int_set_falling_edge(irq)
+#define start_int_set_rising_edge(irq)
+#define start_int_ack(irq)
+#define start_int_mask(irq)
+#define start_int_umask(irq)
+#endif
+
 static struct i2c_driver isp1301_driver;
 static struct i2c_client *isp1301_i2c_client;
 
@@ -144,7 +158,7 @@ static void i2c_write(u8 buf, u8 subaddr)
 	i2c_master_send(isp1301_i2c_client, &tmpbuf[0], 2);
 }
 
-static void isp1301_configure(void)
+static void isp1301_configure_pnx4008(void)
 {
 	/* PNX4008 only supports DAT_SE0 USB mode */
 	/* PNX4008 R2A requires setting the MAX603 to output 3.6V */
@@ -167,7 +181,63 @@ static void isp1301_configure(void)
 		  ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR);
 	i2c_write(0xFF,
 		  ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR);
+}
 
+static void isp1301_configure_lpc32xx(void)
+{
+	/* LPC32XX only supports DAT_SE0 USB mode */
+	/* This sequence is important */
+
+	/* Disable transparent UART mode first */
+	i2c_smbus_write_byte_data(isp1301_i2c_client,
+		(ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
+		MC1_UART_EN);
+	i2c_smbus_write_byte_data(isp1301_i2c_client,
+		(ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
+		~MC1_SPEED_REG);
+	i2c_smbus_write_byte_data(isp1301_i2c_client,
+				  ISP1301_I2C_MODE_CONTROL_1, MC1_SPEED_REG);
+	i2c_smbus_write_byte_data(isp1301_i2c_client,
+		  (ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR),
+		  ~0);
+	i2c_smbus_write_byte_data(isp1301_i2c_client,
+		ISP1301_I2C_MODE_CONTROL_2,
+		(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL));
+	i2c_smbus_write_byte_data(isp1301_i2c_client,
+		(ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0);
+	i2c_smbus_write_byte_data(isp1301_i2c_client,
+		ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0);
+	i2c_smbus_write_byte_data(isp1301_i2c_client,
+		ISP1301_I2C_OTG_CONTROL_1,
+		(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
+	i2c_smbus_write_byte_data(isp1301_i2c_client,
+		(ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
+		(OTG1_DM_PULLUP | OTG1_DP_PULLUP));
+	i2c_smbus_write_byte_data(isp1301_i2c_client,
+		ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
+	i2c_smbus_write_byte_data(isp1301_i2c_client,
+		ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR,
+		~0);
+	i2c_smbus_write_byte_data(isp1301_i2c_client,
+		ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
+
+	/* Enable usb_need_clk clock after transceiver is initialized */
+	__raw_writel((__raw_readl(USB_CTRL) | (1 << 22)), USB_CTRL);
+
+	printk(KERN_INFO "ISP1301 Vendor ID  : 0x%04x\n",
+	      i2c_smbus_read_word_data(isp1301_i2c_client, 0x00));
+	printk(KERN_INFO "ISP1301 Product ID : 0x%04x\n",
+	      i2c_smbus_read_word_data(isp1301_i2c_client, 0x02));
+	printk(KERN_INFO "ISP1301 Version ID : 0x%04x\n",
+	      i2c_smbus_read_word_data(isp1301_i2c_client, 0x14));
+}
+
+static void isp1301_configure(void)
+{
+	if (machine_is_pnx4008())
+		isp1301_configure_pnx4008();
+	else
+		isp1301_configure_lpc32xx();
 }
 
 static inline void isp1301_vbus_on(void)
@@ -258,39 +328,43 @@ static const struct hc_driver ohci_nxp_hc_driver = {
 
 static void nxp_set_usb_bits(void)
 {
-	start_int_set_falling_edge(SE_USB_OTG_ATX_INT_N);
-	start_int_ack(SE_USB_OTG_ATX_INT_N);
-	start_int_umask(SE_USB_OTG_ATX_INT_N);
+	if (machine_is_pnx4008()) {
+		start_int_set_falling_edge(SE_USB_OTG_ATX_INT_N);
+		start_int_ack(SE_USB_OTG_ATX_INT_N);
+		start_int_umask(SE_USB_OTG_ATX_INT_N);
 
-	start_int_set_rising_edge(SE_USB_OTG_TIMER_INT);
-	start_int_ack(SE_USB_OTG_TIMER_INT);
-	start_int_umask(SE_USB_OTG_TIMER_INT);
+		start_int_set_rising_edge(SE_USB_OTG_TIMER_INT);
+		start_int_ack(SE_USB_OTG_TIMER_INT);
+		start_int_umask(SE_USB_OTG_TIMER_INT);
 
-	start_int_set_rising_edge(SE_USB_I2C_INT);
-	start_int_ack(SE_USB_I2C_INT);
-	start_int_umask(SE_USB_I2C_INT);
+		start_int_set_rising_edge(SE_USB_I2C_INT);
+		start_int_ack(SE_USB_I2C_INT);
+		start_int_umask(SE_USB_I2C_INT);
 
-	start_int_set_rising_edge(SE_USB_INT);
-	start_int_ack(SE_USB_INT);
-	start_int_umask(SE_USB_INT);
+		start_int_set_rising_edge(SE_USB_INT);
+		start_int_ack(SE_USB_INT);
+		start_int_umask(SE_USB_INT);
 
-	start_int_set_rising_edge(SE_USB_NEED_CLK_INT);
-	start_int_ack(SE_USB_NEED_CLK_INT);
-	start_int_umask(SE_USB_NEED_CLK_INT);
+		start_int_set_rising_edge(SE_USB_NEED_CLK_INT);
+		start_int_ack(SE_USB_NEED_CLK_INT);
+		start_int_umask(SE_USB_NEED_CLK_INT);
 
-	start_int_set_rising_edge(SE_USB_AHB_NEED_CLK_INT);
-	start_int_ack(SE_USB_AHB_NEED_CLK_INT);
-	start_int_umask(SE_USB_AHB_NEED_CLK_INT);
+		start_int_set_rising_edge(SE_USB_AHB_NEED_CLK_INT);
+		start_int_ack(SE_USB_AHB_NEED_CLK_INT);
+		start_int_umask(SE_USB_AHB_NEED_CLK_INT);
+	}
 }
 
 static void nxp_unset_usb_bits(void)
 {
-	start_int_mask(SE_USB_OTG_ATX_INT_N);
-	start_int_mask(SE_USB_OTG_TIMER_INT);
-	start_int_mask(SE_USB_I2C_INT);
-	start_int_mask(SE_USB_INT);
-	start_int_mask(SE_USB_NEED_CLK_INT);
-	start_int_mask(SE_USB_AHB_NEED_CLK_INT);
+	if (machine_is_pnx4008()) {
+		start_int_mask(SE_USB_OTG_ATX_INT_N);
+		start_int_mask(SE_USB_OTG_TIMER_INT);
+		start_int_mask(SE_USB_I2C_INT);
+		start_int_mask(SE_USB_INT);
+		start_int_mask(SE_USB_NEED_CLK_INT);
+		start_int_mask(SE_USB_AHB_NEED_CLK_INT);
+	}
 }
 
 static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)