From 53b434f09340db8ad59b43789b7c43f54171fe36 Mon Sep 17 00:00:00 2001 From: Wang Xingchao Date: Tue, 18 Jun 2013 10:41:53 +0800 Subject: [PATCH] ALSA: hda - Haswell converter power state D0 verify Haswell converters maybe in wrong power state before usage. i.e. only converter 0 is in D0, converter 1/2 are in D3. When pin choose converter 1/2, there's no audio output, this cause dependency when playing differnt stream on pins. AUD_PWRST ConvertorA_Widget_Power_State_Current D0 AUD_PWRST ConvertorA_Widget_Power_State_Requsted D0 AUD_PWRST ConvertorB_Widget_Power_State_Current D3 AUD_PWRST ConvertorB_Widget_Power_State_Requested D3 AUD_PWRST ConvC_Widget_PwrSt_Curr D3 AUD_PWRST ConvC_Widget_PwrSt_Req D3 This patch check converter's power state and set D0 if it's in D3 mode. Signed-off-by: Wang Xingchao Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_hdmi.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index e12f7a030c58..8983747f2a37 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1018,10 +1018,19 @@ static void hdmi_unsol_event(struct hda_codec *codec, unsigned int res) hdmi_non_intrinsic_event(codec, res); } -static void haswell_verify_pin_D0(struct hda_codec *codec, hda_nid_t nid) +static void haswell_verify_pin_D0(struct hda_codec *codec, + hda_nid_t cvt_nid, hda_nid_t nid) { int pwr, lamp, ramp; + /* For Haswell, the converter 1/2 may keep in D3 state after bootup, + * thus pins could only choose converter 0 for use. Make sure the + * converters are in correct power state */ + pwr = snd_hda_codec_read(codec, cvt_nid, 0, AC_VERB_GET_POWER_STATE, 0); + pwr = (pwr & AC_PWRST_ACTUAL) >> AC_PWRST_ACTUAL_SHIFT; + if (pwr != AC_PWRST_D0) + snd_hda_codec_write(codec, cvt_nid, 0, AC_VERB_SET_POWER_STATE, AC_PWRST_D0); + pwr = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_POWER_STATE, 0); pwr = (pwr & AC_PWRST_ACTUAL) >> AC_PWRST_ACTUAL_SHIFT; if (pwr != AC_PWRST_D0) { @@ -1068,7 +1077,7 @@ static int hdmi_setup_stream(struct hda_codec *codec, hda_nid_t cvt_nid, int new_pinctl = 0; if (codec->vendor_id == 0x80862807) - haswell_verify_pin_D0(codec, pin_nid); + haswell_verify_pin_D0(codec, cvt_nid, pin_nid); if (snd_hda_query_pin_caps(codec, pin_nid) & AC_PINCAP_HBR) { pinctl = snd_hda_codec_read(codec, pin_nid, 0,