From 538b387234563e030cd9ad8983ad3de8eaf03e13 Mon Sep 17 00:00:00 2001 From: David Binder Date: Wed, 13 Apr 2016 16:08:41 -0400 Subject: [PATCH] staging: unisys: Documentation: Remove proc-entries.txt Unisys drivers no longer utilize procfs. Therefore, the documentation for our procfs entries is no longer needed. Signed-off-by: David Binder Signed-off-by: David Kershner Signed-off-by: Greg Kroah-Hartman --- .../unisys/Documentation/proc-entries.txt | 93 ------------------- drivers/staging/unisys/MAINTAINERS | 1 - 2 files changed, 94 deletions(-) delete mode 100644 drivers/staging/unisys/Documentation/proc-entries.txt diff --git a/drivers/staging/unisys/Documentation/proc-entries.txt b/drivers/staging/unisys/Documentation/proc-entries.txt deleted file mode 100644 index 426f92b1c577..000000000000 --- a/drivers/staging/unisys/Documentation/proc-entries.txt +++ /dev/null @@ -1,93 +0,0 @@ - s-Par Proc Entries -This document describes the proc entries created by the Unisys s-Par modules. - -Support Module Entries -These entries are provided primarily for debugging. - -/proc/uislib/info: This entry contains debugging information for the -uislib module, including bus information and memory usage. - -/proc/visorchipset/controlvm: This directory contains debugging -entries for the controlvm channel used by visorchipset. - -/proc/uislib/platform: This entry is used to display the platform -number this node is in the system. For some guests, this may be -invalid. - -/proc/visorchipset/chipsetready: This entry is written to by scripts -to signify that any user level activity has been completed before the -guest can be considered running and is shown as running in the s-Par -UI. - -Device Entries -These entries provide status of the devices shared by a service partition. - -/proc/uislib/vbus: this is a directory containing entries for each -virtual bus. Each numbered sub-directory contains an info entry, which -describes the devices that appear on that bus. - -/proc/uislib/cycles_before_wait: This entry is used to tune -performance, by setting the number of cycles we wait before going idle -when in polling mode. A longer time will reduce message latency but -spend more processing time polling. - -/proc/uislib/smart_wakeup: This entry is used to tune performance, by -enabling or disabling smart wakeup. - -/proc/virthba/info: This entry contains debugging information for the -virthba module, including interrupt information and memory usage. - -/proc/virthba/enable_ints: This entry controls interrupt use by the -virthba module. Writing a 0 to this entry will disable interrupts. - -/proc/virtnic/info: This entry contains debugging information for the -virtnic module, including interrupt information, send and receive -counts, and other device information. - -/proc/virtnic/ethX: This is a directory containing entries for each -virtual NIC. Each named subdirectory contains two entries, -clientstring and zone. - -/proc/virtpci/info: This entry contains debugging information for the -virtpci module, including virtual PCI bus information and device -locations. - -/proc/virtnic/enable_ints: This entry controls interrupt use by the -virtnic module. Writing a 0 to this entry will disable interrupts. - -Visorconinclient, visordiag, visornoop, visorserialclient, and -visorvideoclient Entries - -The entries in proc for these modules all follow the same -pattern. Each module has its own proc directory with the same name, -e.g. visordiag presents a /proc/visordiag directory. Inside of the -module's directory are a device directory, which contains one numbered -directory for each device provided by that module. Each device has a -diag entry that presents the device number and visorbus name for that -device. The module directory also has a driver/diag entry, which -reports the corresponding s-Par version number of the driver. - -Automated Installation Entries - -These entries are used to pass information between the s-Par platform -and the Linux-based installation and recovery tool. These values are -read/write, however, the guest can only reset them to 0, or report an -error status through the installer entry. The values are only set via -s-Par's firmware interface, to help prevent accidentally booting into -the tool. - -/proc/visorchipset/boottotool: This entry instructs s-Par that the -next reboot will launch the installation and recovery tool. If set to -0, the next boot will happen according to the UEFI boot manager -settings. - -/proc/visorchipset/toolaction: This entry indicates the installation -and recovery tool mode requested for the next boot. - -/proc/visorchipset/installer: this entry is used by the installation -and recovery tool to pass status and result information back to the -s-Par firmware. - -/proc/visorchipset/partition: This directory contains the guest -partition configuration data for each virtual bus, for use during -installation and at runtime for s-Par service partitions. diff --git a/drivers/staging/unisys/MAINTAINERS b/drivers/staging/unisys/MAINTAINERS index cc46e37e64c1..1f0425bf3583 100644 --- a/drivers/staging/unisys/MAINTAINERS +++ b/drivers/staging/unisys/MAINTAINERS @@ -2,5 +2,4 @@ Unisys s-Par drivers M: David Kershner S: Maintained F: Documentation/s-Par/overview.txt -F: Documentation/s-Par/proc-entries.txt F: drivers/staging/unisys/