can: netlink support for bus-error reporting and counters
This patch makes the bus-error reporting configurable and allows to retrieve the CAN TX and RX bus error counters via netlink interface. I have added support for the SJA1000. The TX and RX bus error counters are also copied to the data fields 6..7 of error messages when state changes are reported. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
78ca90ea99
commit
52c793f240
|
@ -574,6 +574,7 @@ static const struct nla_policy can_policy[IFLA_CAN_MAX + 1] = {
|
|||
[IFLA_CAN_BITTIMING_CONST]
|
||||
= { .len = sizeof(struct can_bittiming_const) },
|
||||
[IFLA_CAN_CLOCK] = { .len = sizeof(struct can_clock) },
|
||||
[IFLA_CAN_BERR_COUNTER] = { .len = sizeof(struct can_berr_counter) },
|
||||
};
|
||||
|
||||
static int can_changelink(struct net_device *dev,
|
||||
|
@ -649,6 +650,8 @@ static size_t can_get_size(const struct net_device *dev)
|
|||
size += nla_total_size(sizeof(u32)); /* IFLA_CAN_RESTART_MS */
|
||||
size += sizeof(struct can_bittiming); /* IFLA_CAN_BITTIMING */
|
||||
size += sizeof(struct can_clock); /* IFLA_CAN_CLOCK */
|
||||
if (priv->do_get_berr_counter) /* IFLA_CAN_BERR_COUNTER */
|
||||
size += sizeof(struct can_berr_counter);
|
||||
if (priv->bittiming_const) /* IFLA_CAN_BITTIMING_CONST */
|
||||
size += sizeof(struct can_bittiming_const);
|
||||
|
||||
|
@ -659,6 +662,7 @@ static int can_fill_info(struct sk_buff *skb, const struct net_device *dev)
|
|||
{
|
||||
struct can_priv *priv = netdev_priv(dev);
|
||||
struct can_ctrlmode cm = {.flags = priv->ctrlmode};
|
||||
struct can_berr_counter bec;
|
||||
enum can_state state = priv->state;
|
||||
|
||||
if (priv->do_get_state)
|
||||
|
@ -669,6 +673,8 @@ static int can_fill_info(struct sk_buff *skb, const struct net_device *dev)
|
|||
NLA_PUT(skb, IFLA_CAN_BITTIMING,
|
||||
sizeof(priv->bittiming), &priv->bittiming);
|
||||
NLA_PUT(skb, IFLA_CAN_CLOCK, sizeof(cm), &priv->clock);
|
||||
if (priv->do_get_berr_counter && !priv->do_get_berr_counter(dev, &bec))
|
||||
NLA_PUT(skb, IFLA_CAN_BERR_COUNTER, sizeof(bec), &bec);
|
||||
if (priv->bittiming_const)
|
||||
NLA_PUT(skb, IFLA_CAN_BITTIMING_CONST,
|
||||
sizeof(*priv->bittiming_const), priv->bittiming_const);
|
||||
|
|
|
@ -130,8 +130,12 @@ static void set_normal_mode(struct net_device *dev)
|
|||
/* check reset bit */
|
||||
if ((status & MOD_RM) == 0) {
|
||||
priv->can.state = CAN_STATE_ERROR_ACTIVE;
|
||||
/* enable all interrupts */
|
||||
priv->write_reg(priv, REG_IER, IRQ_ALL);
|
||||
/* enable interrupts */
|
||||
if (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)
|
||||
priv->write_reg(priv, REG_IER, IRQ_ALL);
|
||||
else
|
||||
priv->write_reg(priv, REG_IER,
|
||||
IRQ_ALL & ~IRQ_BEI);
|
||||
return;
|
||||
}
|
||||
|
||||
|
@ -203,6 +207,17 @@ static int sja1000_set_bittiming(struct net_device *dev)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static int sja1000_get_berr_counter(const struct net_device *dev,
|
||||
struct can_berr_counter *bec)
|
||||
{
|
||||
struct sja1000_priv *priv = netdev_priv(dev);
|
||||
|
||||
bec->txerr = priv->read_reg(priv, REG_TXERR);
|
||||
bec->rxerr = priv->read_reg(priv, REG_RXERR);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* initialize SJA1000 chip:
|
||||
* - reset chip
|
||||
|
@ -437,6 +452,8 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
|
|||
CAN_ERR_CRTL_TX_PASSIVE :
|
||||
CAN_ERR_CRTL_RX_PASSIVE;
|
||||
}
|
||||
cf->data[6] = txerr;
|
||||
cf->data[7] = rxerr;
|
||||
}
|
||||
|
||||
priv->can.state = state;
|
||||
|
@ -567,7 +584,9 @@ struct net_device *alloc_sja1000dev(int sizeof_priv)
|
|||
priv->can.bittiming_const = &sja1000_bittiming_const;
|
||||
priv->can.do_set_bittiming = sja1000_set_bittiming;
|
||||
priv->can.do_set_mode = sja1000_set_mode;
|
||||
priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES;
|
||||
priv->can.do_get_berr_counter = sja1000_get_berr_counter;
|
||||
priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES |
|
||||
CAN_CTRLMODE_BERR_REPORTING;
|
||||
|
||||
if (sizeof_priv)
|
||||
priv->priv = (void *)priv + sizeof(struct sja1000_priv);
|
||||
|
|
|
@ -47,6 +47,8 @@ struct can_priv {
|
|||
int (*do_set_mode)(struct net_device *dev, enum can_mode mode);
|
||||
int (*do_get_state)(const struct net_device *dev,
|
||||
enum can_state *state);
|
||||
int (*do_get_berr_counter)(const struct net_device *dev,
|
||||
struct can_berr_counter *bec);
|
||||
|
||||
unsigned int echo_skb_max;
|
||||
struct sk_buff **echo_skb;
|
||||
|
|
|
@ -69,6 +69,14 @@ enum can_state {
|
|||
CAN_STATE_MAX
|
||||
};
|
||||
|
||||
/*
|
||||
* CAN bus error counters
|
||||
*/
|
||||
struct can_berr_counter {
|
||||
__u16 txerr;
|
||||
__u16 rxerr;
|
||||
};
|
||||
|
||||
/*
|
||||
* CAN controller mode
|
||||
*/
|
||||
|
@ -77,10 +85,11 @@ struct can_ctrlmode {
|
|||
__u32 flags;
|
||||
};
|
||||
|
||||
#define CAN_CTRLMODE_LOOPBACK 0x1 /* Loopback mode */
|
||||
#define CAN_CTRLMODE_LISTENONLY 0x2 /* Listen-only mode */
|
||||
#define CAN_CTRLMODE_3_SAMPLES 0x4 /* Triple sampling mode */
|
||||
#define CAN_CTRLMODE_ONE_SHOT 0x8 /* One-Shot mode */
|
||||
#define CAN_CTRLMODE_LOOPBACK 0x01 /* Loopback mode */
|
||||
#define CAN_CTRLMODE_LISTENONLY 0x02 /* Listen-only mode */
|
||||
#define CAN_CTRLMODE_3_SAMPLES 0x04 /* Triple sampling mode */
|
||||
#define CAN_CTRLMODE_ONE_SHOT 0x08 /* One-Shot mode */
|
||||
#define CAN_CTRLMODE_BERR_REPORTING 0x10 /* Bus-error reporting */
|
||||
|
||||
/*
|
||||
* CAN device statistics
|
||||
|
@ -106,6 +115,7 @@ enum {
|
|||
IFLA_CAN_CTRLMODE,
|
||||
IFLA_CAN_RESTART_MS,
|
||||
IFLA_CAN_RESTART,
|
||||
IFLA_CAN_BERR_COUNTER,
|
||||
__IFLA_CAN_MAX
|
||||
};
|
||||
|
||||
|
|
Loading…
Reference in New Issue