From 52160da71abcd6fed96b06f40badbb7cf6173e45 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Tue, 27 Nov 2012 03:46:35 +0000 Subject: [PATCH] bnx2x: Add warning message in case of non-10G SFP module The string was split to several lines since it reached over 180 chars, which seems too much. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 661d3ea21635..ebab35d1309d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -7986,9 +7986,8 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy, { struct bnx2x *bp = params->bp; u32 sync_offset = 0, phy_idx, media_types; - u8 val[2], check_limiting_mode = 0; + u8 gport, val[2], check_limiting_mode = 0; *edc_mode = EDC_MODE_LIMITING; - phy->media_type = ETH_PHY_UNSPECIFIED; /* First check for copper cable */ if (bnx2x_read_sfp_module_eeprom(phy, @@ -8043,8 +8042,15 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy, SFP_EEPROM_COMP_CODE_LR_MASK | SFP_EEPROM_COMP_CODE_LRM_MASK)) == 0) { DP(NETIF_MSG_LINK, "1G Optic module detected\n"); + gport = params->port; phy->media_type = ETH_PHY_SFP_1G_FIBER; phy->req_line_speed = SPEED_1000; + if (!CHIP_IS_E1x(bp)) + gport = BP_PATH(bp) + (params->port << 1); + netdev_err(bp->dev, "Warning: Link speed was forced to 1000Mbps." + " Current SFP module in port %d is not" + " compliant with 10G Ethernet\n", + gport); } else { int idx, cfg_idx = 0; DP(NETIF_MSG_LINK, "10G Optic module detected\n");