USB-serial fixes for v4.2-rc2
Here's an idr memory-leak fix and a couple of new device ids. Included is also a build fix for mos7720 on the mn10300 architecture, which has a register with the same name as one of the driver defines. Signed-off-by: Johan Hovold <johan@kernel.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABAgAGBQJVn8VQAAoJEEEN5E/e4bSVJOUP/1ndwFMIHqxmUSQDHM/wdgea SfhT0Pdd/m1VpYx9TXOa8raYTIbBonkAgVpMcVJQjtAHyeYa9AwnmtAatsGMUQMr 0gkIFlr8xjgZojxfNxconuLW0ok8jy+Le1yfB1B/KBtIUhzTvH+T3xPj9nVsmn5a p4gAii6A3+Gs6BZb5H4BBpMrVFQaR3S+qHWyCjAlCsxKDiAGKGlp/xGWqfAHDGg7 jSTZzFb4IEEj65aruz9atjWiWBI3QBFKckip8hyXs6h7oPKL2CrW9trT77LwO9Yu gFFj2mzrm1YL+b+iEjsk7D6DUKqzVzmSGOJqm75KrS5z9aKmZYi2I1NlZDxEUCED DQfKAMOF2offy88jbOTpR1x14LZVQQD+Y4puTT46a4Cir1tbFuQSTbRRGySW84Fx u46tv5k4OsqEUW0uwpie2NH7CEvjXaCmmWKSHDEJxqy/qO+0SO1NriEPS6zUY0Mo hUqvobsZg3h2TGXz82AZOCrfjVji7wlpN8oNkcCv+EQJ+CxCdnZLPK+9VdxkrVlt sjzGdkkQC/sLF3/7vmb8wTnpYPnoOS/x/VLUVCdnWVUlM7JYRyNN1m0hpaVN2z9X Mb3V4ITeTCMoGuwFdm9UjGHHsNiCgxO9kMI5hZJi0KkB35alxdUcZGs5N2y0CUYc QXRM0Hfe6VRsh3q2B1RH =K/L7 -----END PGP SIGNATURE----- Merge tag 'usb-serial-4.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.2-rc2 Here's an idr memory-leak fix and a couple of new device ids. Included is also a build fix for mos7720 on the mn10300 architecture, which has a register with the same name as one of the driver defines. Signed-off-by: Johan Hovold <johan@kernel.org>
This commit is contained in:
Greg Kroah-Hartman
commit
51f007e1a1
|
|
@ -187,6 +187,7 @@ static const struct usb_device_id id_table[] = {
|
|||
{ USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */
|
||||
{ USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */
|
||||
{ USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */
|
||||
{ USB_DEVICE(0x2626, 0xEA60) }, /* Aruba Networks 7xxx USB Serial Console */
|
||||
{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
|
||||
{ USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
|
||||
{ USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
|
||||
|
|
|
|||
|
|
@ -121,26 +121,26 @@ static DEFINE_SPINLOCK(release_lock);
|
|||
static const unsigned int dummy; /* for clarity in register access fns */
|
||||
|
||||
enum mos_regs {
|
||||
THR, /* serial port regs */
|
||||
RHR,
|
||||
IER,
|
||||
FCR,
|
||||
ISR,
|
||||
LCR,
|
||||
MCR,
|
||||
LSR,
|
||||
MSR,
|
||||
SPR,
|
||||
DLL,
|
||||
DLM,
|
||||
DPR, /* parallel port regs */
|
||||
DSR,
|
||||
DCR,
|
||||
ECR,
|
||||
SP1_REG, /* device control regs */
|
||||
SP2_REG, /* serial port 2 (7720 only) */
|
||||
PP_REG,
|
||||
SP_CONTROL_REG,
|
||||
MOS7720_THR, /* serial port regs */
|
||||
MOS7720_RHR,
|
||||
MOS7720_IER,
|
||||
MOS7720_FCR,
|
||||
MOS7720_ISR,
|
||||
MOS7720_LCR,
|
||||
MOS7720_MCR,
|
||||
MOS7720_LSR,
|
||||
MOS7720_MSR,
|
||||
MOS7720_SPR,
|
||||
MOS7720_DLL,
|
||||
MOS7720_DLM,
|
||||
MOS7720_DPR, /* parallel port regs */
|
||||
MOS7720_DSR,
|
||||
MOS7720_DCR,
|
||||
MOS7720_ECR,
|
||||
MOS7720_SP1_REG, /* device control regs */
|
||||
MOS7720_SP2_REG, /* serial port 2 (7720 only) */
|
||||
MOS7720_PP_REG,
|
||||
MOS7720_SP_CONTROL_REG,
|
||||
};
|
||||
|
||||
/*
|
||||
|
|
@ -150,26 +150,26 @@ enum mos_regs {
|
|||
static inline __u16 get_reg_index(enum mos_regs reg)
|
||||
{
|
||||
static const __u16 mos7715_index_lookup_table[] = {
|
||||
0x00, /* THR */
|
||||
0x00, /* RHR */
|
||||
0x01, /* IER */
|
||||
0x02, /* FCR */
|
||||
0x02, /* ISR */
|
||||
0x03, /* LCR */
|
||||
0x04, /* MCR */
|
||||
0x05, /* LSR */
|
||||
0x06, /* MSR */
|
||||
0x07, /* SPR */
|
||||
0x00, /* DLL */
|
||||
0x01, /* DLM */
|
||||
0x00, /* DPR */
|
||||
0x01, /* DSR */
|
||||
0x02, /* DCR */
|
||||
0x0a, /* ECR */
|
||||
0x01, /* SP1_REG */
|
||||
0x02, /* SP2_REG (7720 only) */
|
||||
0x04, /* PP_REG (7715 only) */
|
||||
0x08, /* SP_CONTROL_REG */
|
||||
0x00, /* MOS7720_THR */
|
||||
0x00, /* MOS7720_RHR */
|
||||
0x01, /* MOS7720_IER */
|
||||
0x02, /* MOS7720_FCR */
|
||||
0x02, /* MOS7720_ISR */
|
||||
0x03, /* MOS7720_LCR */
|
||||
0x04, /* MOS7720_MCR */
|
||||
0x05, /* MOS7720_LSR */
|
||||
0x06, /* MOS7720_MSR */
|
||||
0x07, /* MOS7720_SPR */
|
||||
0x00, /* MOS7720_DLL */
|
||||
0x01, /* MOS7720_DLM */
|
||||
0x00, /* MOS7720_DPR */
|
||||
0x01, /* MOS7720_DSR */
|
||||
0x02, /* MOS7720_DCR */
|
||||
0x0a, /* MOS7720_ECR */
|
||||
0x01, /* MOS7720_SP1_REG */
|
||||
0x02, /* MOS7720_SP2_REG (7720 only) */
|
||||
0x04, /* MOS7720_PP_REG (7715 only) */
|
||||
0x08, /* MOS7720_SP_CONTROL_REG */
|
||||
};
|
||||
return mos7715_index_lookup_table[reg];
|
||||
}
|
||||
|
|
@ -181,10 +181,10 @@ static inline __u16 get_reg_index(enum mos_regs reg)
|
|||
static inline __u16 get_reg_value(enum mos_regs reg,
|
||||
unsigned int serial_portnum)
|
||||
{
|
||||
if (reg >= SP1_REG) /* control reg */
|
||||
if (reg >= MOS7720_SP1_REG) /* control reg */
|
||||
return 0x0000;
|
||||
|
||||
else if (reg >= DPR) /* parallel port reg (7715 only) */
|
||||
else if (reg >= MOS7720_DPR) /* parallel port reg (7715 only) */
|
||||
return 0x0100;
|
||||
|
||||
else /* serial port reg */
|
||||
|
|
@ -252,7 +252,8 @@ static inline int mos7715_change_mode(struct mos7715_parport *mos_parport,
|
|||
enum mos7715_pp_modes mode)
|
||||
{
|
||||
mos_parport->shadowECR = mode;
|
||||
write_mos_reg(mos_parport->serial, dummy, ECR, mos_parport->shadowECR);
|
||||
write_mos_reg(mos_parport->serial, dummy, MOS7720_ECR,
|
||||
mos_parport->shadowECR);
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
@ -486,7 +487,7 @@ static void parport_mos7715_write_data(struct parport *pp, unsigned char d)
|
|||
if (parport_prologue(pp) < 0)
|
||||
return;
|
||||
mos7715_change_mode(mos_parport, SPP);
|
||||
write_mos_reg(mos_parport->serial, dummy, DPR, (__u8)d);
|
||||
write_mos_reg(mos_parport->serial, dummy, MOS7720_DPR, (__u8)d);
|
||||
parport_epilogue(pp);
|
||||
}
|
||||
|
||||
|
|
@ -497,7 +498,7 @@ static unsigned char parport_mos7715_read_data(struct parport *pp)
|
|||
|
||||
if (parport_prologue(pp) < 0)
|
||||
return 0;
|
||||
read_mos_reg(mos_parport->serial, dummy, DPR, &d);
|
||||
read_mos_reg(mos_parport->serial, dummy, MOS7720_DPR, &d);
|
||||
parport_epilogue(pp);
|
||||
return d;
|
||||
}
|
||||
|
|
@ -510,7 +511,7 @@ static void parport_mos7715_write_control(struct parport *pp, unsigned char d)
|
|||
if (parport_prologue(pp) < 0)
|
||||
return;
|
||||
data = ((__u8)d & 0x0f) | (mos_parport->shadowDCR & 0xf0);
|
||||
write_mos_reg(mos_parport->serial, dummy, DCR, data);
|
||||
write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR, data);
|
||||
mos_parport->shadowDCR = data;
|
||||
parport_epilogue(pp);
|
||||
}
|
||||
|
|
@ -543,7 +544,8 @@ static unsigned char parport_mos7715_frob_control(struct parport *pp,
|
|||
if (parport_prologue(pp) < 0)
|
||||
return 0;
|
||||
mos_parport->shadowDCR = (mos_parport->shadowDCR & (~mask)) ^ val;
|
||||
write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
|
||||
write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR,
|
||||
mos_parport->shadowDCR);
|
||||
dcr = mos_parport->shadowDCR & 0x0f;
|
||||
parport_epilogue(pp);
|
||||
return dcr;
|
||||
|
|
@ -581,7 +583,8 @@ static void parport_mos7715_data_forward(struct parport *pp)
|
|||
return;
|
||||
mos7715_change_mode(mos_parport, PS2);
|
||||
mos_parport->shadowDCR &= ~0x20;
|
||||
write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
|
||||
write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR,
|
||||
mos_parport->shadowDCR);
|
||||
parport_epilogue(pp);
|
||||
}
|
||||
|
||||
|
|
@ -593,7 +596,8 @@ static void parport_mos7715_data_reverse(struct parport *pp)
|
|||
return;
|
||||
mos7715_change_mode(mos_parport, PS2);
|
||||
mos_parport->shadowDCR |= 0x20;
|
||||
write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
|
||||
write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR,
|
||||
mos_parport->shadowDCR);
|
||||
parport_epilogue(pp);
|
||||
}
|
||||
|
||||
|
|
@ -633,8 +637,10 @@ static void parport_mos7715_restore_state(struct parport *pp,
|
|||
spin_unlock(&release_lock);
|
||||
return;
|
||||
}
|
||||
write_parport_reg_nonblock(mos_parport, DCR, mos_parport->shadowDCR);
|
||||
write_parport_reg_nonblock(mos_parport, ECR, mos_parport->shadowECR);
|
||||
write_parport_reg_nonblock(mos_parport, MOS7720_DCR,
|
||||
mos_parport->shadowDCR);
|
||||
write_parport_reg_nonblock(mos_parport, MOS7720_ECR,
|
||||
mos_parport->shadowECR);
|
||||
spin_unlock(&release_lock);
|
||||
}
|
||||
|
||||
|
|
@ -714,14 +720,16 @@ static int mos7715_parport_init(struct usb_serial *serial)
|
|||
init_completion(&mos_parport->syncmsg_compl);
|
||||
|
||||
/* cycle parallel port reset bit */
|
||||
write_mos_reg(mos_parport->serial, dummy, PP_REG, (__u8)0x80);
|
||||
write_mos_reg(mos_parport->serial, dummy, PP_REG, (__u8)0x00);
|
||||
write_mos_reg(mos_parport->serial, dummy, MOS7720_PP_REG, (__u8)0x80);
|
||||
write_mos_reg(mos_parport->serial, dummy, MOS7720_PP_REG, (__u8)0x00);
|
||||
|
||||
/* initialize device registers */
|
||||
mos_parport->shadowDCR = DCR_INIT_VAL;
|
||||
write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
|
||||
write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR,
|
||||
mos_parport->shadowDCR);
|
||||
mos_parport->shadowECR = ECR_INIT_VAL;
|
||||
write_mos_reg(mos_parport->serial, dummy, ECR, mos_parport->shadowECR);
|
||||
write_mos_reg(mos_parport->serial, dummy, MOS7720_ECR,
|
||||
mos_parport->shadowECR);
|
||||
|
||||
/* register with parport core */
|
||||
mos_parport->pp = parport_register_port(0, PARPORT_IRQ_NONE,
|
||||
|
|
@ -1033,45 +1041,49 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
|
|||
/* Initialize MCS7720 -- Write Init values to corresponding Registers
|
||||
*
|
||||
* Register Index
|
||||
* 0 : THR/RHR
|
||||
* 1 : IER
|
||||
* 2 : FCR
|
||||
* 3 : LCR
|
||||
* 4 : MCR
|
||||
* 5 : LSR
|
||||
* 6 : MSR
|
||||
* 7 : SPR
|
||||
* 0 : MOS7720_THR/MOS7720_RHR
|
||||
* 1 : MOS7720_IER
|
||||
* 2 : MOS7720_FCR
|
||||
* 3 : MOS7720_LCR
|
||||
* 4 : MOS7720_MCR
|
||||
* 5 : MOS7720_LSR
|
||||
* 6 : MOS7720_MSR
|
||||
* 7 : MOS7720_SPR
|
||||
*
|
||||
* 0x08 : SP1/2 Control Reg
|
||||
*/
|
||||
port_number = port->port_number;
|
||||
read_mos_reg(serial, port_number, LSR, &data);
|
||||
read_mos_reg(serial, port_number, MOS7720_LSR, &data);
|
||||
|
||||
dev_dbg(&port->dev, "SS::%p LSR:%x\n", mos7720_port, data);
|
||||
|
||||
write_mos_reg(serial, dummy, SP1_REG, 0x02);
|
||||
write_mos_reg(serial, dummy, SP2_REG, 0x02);
|
||||
write_mos_reg(serial, dummy, MOS7720_SP1_REG, 0x02);
|
||||
write_mos_reg(serial, dummy, MOS7720_SP2_REG, 0x02);
|
||||
|
||||
write_mos_reg(serial, port_number, IER, 0x00);
|
||||
write_mos_reg(serial, port_number, FCR, 0x00);
|
||||
write_mos_reg(serial, port_number, MOS7720_IER, 0x00);
|
||||
write_mos_reg(serial, port_number, MOS7720_FCR, 0x00);
|
||||
|
||||
write_mos_reg(serial, port_number, FCR, 0xcf);
|
||||
write_mos_reg(serial, port_number, MOS7720_FCR, 0xcf);
|
||||
mos7720_port->shadowLCR = 0x03;
|
||||
write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
|
||||
write_mos_reg(serial, port_number, MOS7720_LCR,
|
||||
mos7720_port->shadowLCR);
|
||||
mos7720_port->shadowMCR = 0x0b;
|
||||
write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
|
||||
write_mos_reg(serial, port_number, MOS7720_MCR,
|
||||
mos7720_port->shadowMCR);
|
||||
|
||||
write_mos_reg(serial, port_number, SP_CONTROL_REG, 0x00);
|
||||
read_mos_reg(serial, dummy, SP_CONTROL_REG, &data);
|
||||
write_mos_reg(serial, port_number, MOS7720_SP_CONTROL_REG, 0x00);
|
||||
read_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, &data);
|
||||
data = data | (port->port_number + 1);
|
||||
write_mos_reg(serial, dummy, SP_CONTROL_REG, data);
|
||||
write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, data);
|
||||
mos7720_port->shadowLCR = 0x83;
|
||||
write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
|
||||
write_mos_reg(serial, port_number, THR, 0x0c);
|
||||
write_mos_reg(serial, port_number, IER, 0x00);
|
||||
write_mos_reg(serial, port_number, MOS7720_LCR,
|
||||
mos7720_port->shadowLCR);
|
||||
write_mos_reg(serial, port_number, MOS7720_THR, 0x0c);
|
||||
write_mos_reg(serial, port_number, MOS7720_IER, 0x00);
|
||||
mos7720_port->shadowLCR = 0x03;
|
||||
write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
|
||||
write_mos_reg(serial, port_number, IER, 0x0c);
|
||||
write_mos_reg(serial, port_number, MOS7720_LCR,
|
||||
mos7720_port->shadowLCR);
|
||||
write_mos_reg(serial, port_number, MOS7720_IER, 0x0c);
|
||||
|
||||
response = usb_submit_urb(port->read_urb, GFP_KERNEL);
|
||||
if (response)
|
||||
|
|
@ -1144,8 +1156,8 @@ static void mos7720_close(struct usb_serial_port *port)
|
|||
usb_kill_urb(port->write_urb);
|
||||
usb_kill_urb(port->read_urb);
|
||||
|
||||
write_mos_reg(serial, port->port_number, MCR, 0x00);
|
||||
write_mos_reg(serial, port->port_number, IER, 0x00);
|
||||
write_mos_reg(serial, port->port_number, MOS7720_MCR, 0x00);
|
||||
write_mos_reg(serial, port->port_number, MOS7720_IER, 0x00);
|
||||
|
||||
mos7720_port->open = 0;
|
||||
}
|
||||
|
|
@ -1169,7 +1181,8 @@ static void mos7720_break(struct tty_struct *tty, int break_state)
|
|||
data = mos7720_port->shadowLCR & ~UART_LCR_SBC;
|
||||
|
||||
mos7720_port->shadowLCR = data;
|
||||
write_mos_reg(serial, port->port_number, LCR, mos7720_port->shadowLCR);
|
||||
write_mos_reg(serial, port->port_number, MOS7720_LCR,
|
||||
mos7720_port->shadowLCR);
|
||||
}
|
||||
|
||||
/*
|
||||
|
|
@ -1297,7 +1310,7 @@ static void mos7720_throttle(struct tty_struct *tty)
|
|||
/* if we are implementing RTS/CTS, toggle that line */
|
||||
if (tty->termios.c_cflag & CRTSCTS) {
|
||||
mos7720_port->shadowMCR &= ~UART_MCR_RTS;
|
||||
write_mos_reg(port->serial, port->port_number, MCR,
|
||||
write_mos_reg(port->serial, port->port_number, MOS7720_MCR,
|
||||
mos7720_port->shadowMCR);
|
||||
}
|
||||
}
|
||||
|
|
@ -1327,7 +1340,7 @@ static void mos7720_unthrottle(struct tty_struct *tty)
|
|||
/* if we are implementing RTS/CTS, toggle that line */
|
||||
if (tty->termios.c_cflag & CRTSCTS) {
|
||||
mos7720_port->shadowMCR |= UART_MCR_RTS;
|
||||
write_mos_reg(port->serial, port->port_number, MCR,
|
||||
write_mos_reg(port->serial, port->port_number, MOS7720_MCR,
|
||||
mos7720_port->shadowMCR);
|
||||
}
|
||||
}
|
||||
|
|
@ -1352,35 +1365,39 @@ static int set_higher_rates(struct moschip_port *mos7720_port,
|
|||
dev_dbg(&port->dev, "Sending Setting Commands ..........\n");
|
||||
port_number = port->port_number;
|
||||
|
||||
write_mos_reg(serial, port_number, IER, 0x00);
|
||||
write_mos_reg(serial, port_number, FCR, 0x00);
|
||||
write_mos_reg(serial, port_number, FCR, 0xcf);
|
||||
write_mos_reg(serial, port_number, MOS7720_IER, 0x00);
|
||||
write_mos_reg(serial, port_number, MOS7720_FCR, 0x00);
|
||||
write_mos_reg(serial, port_number, MOS7720_FCR, 0xcf);
|
||||
mos7720_port->shadowMCR = 0x0b;
|
||||
write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
|
||||
write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x00);
|
||||
write_mos_reg(serial, port_number, MOS7720_MCR,
|
||||
mos7720_port->shadowMCR);
|
||||
write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, 0x00);
|
||||
|
||||
/***********************************************
|
||||
* Set for higher rates *
|
||||
***********************************************/
|
||||
/* writing baud rate verbatum into uart clock field clearly not right */
|
||||
if (port_number == 0)
|
||||
sp_reg = SP1_REG;
|
||||
sp_reg = MOS7720_SP1_REG;
|
||||
else
|
||||
sp_reg = SP2_REG;
|
||||
sp_reg = MOS7720_SP2_REG;
|
||||
write_mos_reg(serial, dummy, sp_reg, baud * 0x10);
|
||||
write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x03);
|
||||
write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, 0x03);
|
||||
mos7720_port->shadowMCR = 0x2b;
|
||||
write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
|
||||
write_mos_reg(serial, port_number, MOS7720_MCR,
|
||||
mos7720_port->shadowMCR);
|
||||
|
||||
/***********************************************
|
||||
* Set DLL/DLM
|
||||
***********************************************/
|
||||
mos7720_port->shadowLCR = mos7720_port->shadowLCR | UART_LCR_DLAB;
|
||||
write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
|
||||
write_mos_reg(serial, port_number, DLL, 0x01);
|
||||
write_mos_reg(serial, port_number, DLM, 0x00);
|
||||
write_mos_reg(serial, port_number, MOS7720_LCR,
|
||||
mos7720_port->shadowLCR);
|
||||
write_mos_reg(serial, port_number, MOS7720_DLL, 0x01);
|
||||
write_mos_reg(serial, port_number, MOS7720_DLM, 0x00);
|
||||
mos7720_port->shadowLCR = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
|
||||
write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
|
||||
write_mos_reg(serial, port_number, MOS7720_LCR,
|
||||
mos7720_port->shadowLCR);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -1488,15 +1505,16 @@ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port,
|
|||
|
||||
/* Enable access to divisor latch */
|
||||
mos7720_port->shadowLCR = mos7720_port->shadowLCR | UART_LCR_DLAB;
|
||||
write_mos_reg(serial, number, LCR, mos7720_port->shadowLCR);
|
||||
write_mos_reg(serial, number, MOS7720_LCR, mos7720_port->shadowLCR);
|
||||
|
||||
/* Write the divisor */
|
||||
write_mos_reg(serial, number, DLL, (__u8)(divisor & 0xff));
|
||||
write_mos_reg(serial, number, DLM, (__u8)((divisor & 0xff00) >> 8));
|
||||
write_mos_reg(serial, number, MOS7720_DLL, (__u8)(divisor & 0xff));
|
||||
write_mos_reg(serial, number, MOS7720_DLM,
|
||||
(__u8)((divisor & 0xff00) >> 8));
|
||||
|
||||
/* Disable access to divisor latch */
|
||||
mos7720_port->shadowLCR = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
|
||||
write_mos_reg(serial, number, LCR, mos7720_port->shadowLCR);
|
||||
write_mos_reg(serial, number, MOS7720_LCR, mos7720_port->shadowLCR);
|
||||
|
||||
return status;
|
||||
}
|
||||
|
|
@ -1600,14 +1618,16 @@ static void change_port_settings(struct tty_struct *tty,
|
|||
|
||||
|
||||
/* Disable Interrupts */
|
||||
write_mos_reg(serial, port_number, IER, 0x00);
|
||||
write_mos_reg(serial, port_number, FCR, 0x00);
|
||||
write_mos_reg(serial, port_number, FCR, 0xcf);
|
||||
write_mos_reg(serial, port_number, MOS7720_IER, 0x00);
|
||||
write_mos_reg(serial, port_number, MOS7720_FCR, 0x00);
|
||||
write_mos_reg(serial, port_number, MOS7720_FCR, 0xcf);
|
||||
|
||||
/* Send the updated LCR value to the mos7720 */
|
||||
write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
|
||||
write_mos_reg(serial, port_number, MOS7720_LCR,
|
||||
mos7720_port->shadowLCR);
|
||||
mos7720_port->shadowMCR = 0x0b;
|
||||
write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
|
||||
write_mos_reg(serial, port_number, MOS7720_MCR,
|
||||
mos7720_port->shadowMCR);
|
||||
|
||||
/* set up the MCR register and send it to the mos7720 */
|
||||
mos7720_port->shadowMCR = UART_MCR_OUT2;
|
||||
|
|
@ -1619,14 +1639,17 @@ static void change_port_settings(struct tty_struct *tty,
|
|||
/* To set hardware flow control to the specified *
|
||||
* serial port, in SP1/2_CONTROL_REG */
|
||||
if (port_number)
|
||||
write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x01);
|
||||
write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG,
|
||||
0x01);
|
||||
else
|
||||
write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x02);
|
||||
write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG,
|
||||
0x02);
|
||||
|
||||
} else
|
||||
mos7720_port->shadowMCR &= ~(UART_MCR_XONANY);
|
||||
|
||||
write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
|
||||
write_mos_reg(serial, port_number, MOS7720_MCR,
|
||||
mos7720_port->shadowMCR);
|
||||
|
||||
/* Determine divisor based on baud rate */
|
||||
baud = tty_get_baud_rate(tty);
|
||||
|
|
@ -1639,7 +1662,7 @@ static void change_port_settings(struct tty_struct *tty,
|
|||
if (baud >= 230400) {
|
||||
set_higher_rates(mos7720_port, baud);
|
||||
/* Enable Interrupts */
|
||||
write_mos_reg(serial, port_number, IER, 0x0c);
|
||||
write_mos_reg(serial, port_number, MOS7720_IER, 0x0c);
|
||||
return;
|
||||
}
|
||||
|
||||
|
|
@ -1650,7 +1673,7 @@ static void change_port_settings(struct tty_struct *tty,
|
|||
if (cflag & CBAUD)
|
||||
tty_encode_baud_rate(tty, baud, baud);
|
||||
/* Enable Interrupts */
|
||||
write_mos_reg(serial, port_number, IER, 0x0c);
|
||||
write_mos_reg(serial, port_number, MOS7720_IER, 0x0c);
|
||||
|
||||
if (port->read_urb->status != -EINPROGRESS) {
|
||||
status = usb_submit_urb(port->read_urb, GFP_KERNEL);
|
||||
|
|
@ -1725,7 +1748,7 @@ static int get_lsr_info(struct tty_struct *tty,
|
|||
|
||||
count = mos7720_chars_in_buffer(tty);
|
||||
if (count == 0) {
|
||||
read_mos_reg(port->serial, port_number, LSR, &data);
|
||||
read_mos_reg(port->serial, port_number, MOS7720_LSR, &data);
|
||||
if ((data & (UART_LSR_TEMT | UART_LSR_THRE))
|
||||
== (UART_LSR_TEMT | UART_LSR_THRE)) {
|
||||
dev_dbg(&port->dev, "%s -- Empty\n", __func__);
|
||||
|
|
@ -1782,7 +1805,7 @@ static int mos7720_tiocmset(struct tty_struct *tty,
|
|||
mcr &= ~UART_MCR_LOOP;
|
||||
|
||||
mos7720_port->shadowMCR = mcr;
|
||||
write_mos_reg(port->serial, port->port_number, MCR,
|
||||
write_mos_reg(port->serial, port->port_number, MOS7720_MCR,
|
||||
mos7720_port->shadowMCR);
|
||||
|
||||
return 0;
|
||||
|
|
@ -1827,7 +1850,7 @@ static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
|
|||
}
|
||||
|
||||
mos7720_port->shadowMCR = mcr;
|
||||
write_mos_reg(port->serial, port->port_number, MCR,
|
||||
write_mos_reg(port->serial, port->port_number, MOS7720_MCR,
|
||||
mos7720_port->shadowMCR);
|
||||
|
||||
return 0;
|
||||
|
|
@ -1942,7 +1965,7 @@ static int mos7720_startup(struct usb_serial *serial)
|
|||
}
|
||||
#endif
|
||||
/* LSR For Port 1 */
|
||||
read_mos_reg(serial, 0, LSR, &data);
|
||||
read_mos_reg(serial, 0, MOS7720_LSR, &data);
|
||||
dev_dbg(&dev->dev, "LSR:%x\n", data);
|
||||
|
||||
return 0;
|
||||
|
|
|
|||
|
|
@ -1765,6 +1765,7 @@ static const struct usb_device_id option_ids[] = {
|
|||
{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x00, 0x00) },
|
||||
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
|
||||
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
|
||||
{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) }, /* OLICARD300 - MT6225 */
|
||||
{ USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) },
|
||||
{ USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) },
|
||||
{ } /* Terminating entry */
|
||||
|
|
|
|||
|
|
@ -1306,6 +1306,7 @@ static void __exit usb_serial_exit(void)
|
|||
tty_unregister_driver(usb_serial_tty_driver);
|
||||
put_tty_driver(usb_serial_tty_driver);
|
||||
bus_unregister(&usb_serial_bus_type);
|
||||
idr_destroy(&serial_minors);
|
||||
}
|
||||
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue