dt-bindings: Fix dtc warnings in examples
Fix all the warnings in the DT binding schema examples when built with 'W=1'. This is in preparation to make that the default for examples. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Vinod Koul <vkoul@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Kukjin Kim <kgene@kernel.org> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Maxime Ripard <mripard@kernel.org> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
This commit is contained in:
parent
a40df28c56
commit
51a21e0e7b
|
@ -52,7 +52,7 @@ required:
|
|||
|
||||
examples:
|
||||
- |
|
||||
mlahb: ahb {
|
||||
mlahb: ahb@38000000 {
|
||||
compatible = "st,mlahb", "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
|
|
@ -40,7 +40,7 @@ additionalProperties: false
|
|||
|
||||
examples:
|
||||
- |
|
||||
osc24M: clk@01c20050 {
|
||||
osc24M: clk@1c20050 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-osc-clk";
|
||||
reg = <0x01c20050 0x4>;
|
||||
|
|
|
@ -41,7 +41,7 @@ additionalProperties: false
|
|||
|
||||
examples:
|
||||
- |
|
||||
clk@0600005c {
|
||||
clk@600005c {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun9i-a80-gt-clk";
|
||||
reg = <0x0600005c 0x4>;
|
||||
|
|
|
@ -49,11 +49,7 @@ examples:
|
|||
resets = <&tcon_ch0_clk 0>;
|
||||
|
||||
port {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
tve0_in_tcon0: endpoint@0 {
|
||||
reg = <0>;
|
||||
tve0_in_tcon0: endpoint {
|
||||
remote-endpoint = <&tcon0_out_tve0>;
|
||||
};
|
||||
};
|
||||
|
|
|
@ -79,21 +79,15 @@ examples:
|
|||
#size-cells = <0>;
|
||||
|
||||
anx6345_in: port@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
anx6345_in_tcon0: endpoint@0 {
|
||||
reg = <0>;
|
||||
anx6345_in_tcon0: endpoint {
|
||||
remote-endpoint = <&tcon0_out_anx6345>;
|
||||
};
|
||||
};
|
||||
|
||||
anx6345_out: port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
anx6345_out_panel: endpoint@0 {
|
||||
reg = <0>;
|
||||
anx6345_out_panel: endpoint {
|
||||
remote-endpoint = <&panel_in_edp>;
|
||||
};
|
||||
};
|
||||
|
|
|
@ -37,6 +37,8 @@ examples:
|
|||
dsi@ff450000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0xff450000 0x1000>;
|
||||
|
||||
panel@0 {
|
||||
compatible = "leadtek,ltk500hd1829";
|
||||
reg = <0>;
|
||||
|
|
|
@ -37,6 +37,8 @@ examples:
|
|||
dsi@ff450000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0xff450000 0x1000>;
|
||||
|
||||
panel@0 {
|
||||
compatible = "xinpeng,xpp055c272";
|
||||
reg = <0>;
|
||||
|
|
|
@ -174,10 +174,6 @@ examples:
|
|||
};
|
||||
};
|
||||
|
||||
soc@1c00000 {
|
||||
lcdc0: lcdc@1c0c000 {
|
||||
compatible = "allwinner,sun4i-a10-lcdc";
|
||||
};
|
||||
};
|
||||
lcdc0: lcdc { };
|
||||
|
||||
...
|
||||
|
|
|
@ -143,7 +143,7 @@ examples:
|
|||
#size-cells = <2>;
|
||||
dma-coherent;
|
||||
dma-ranges;
|
||||
ranges;
|
||||
ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0x05000000>;
|
||||
|
||||
ti,sci-dev-id = <118>;
|
||||
|
||||
|
@ -169,16 +169,4 @@ examples:
|
|||
ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */
|
||||
};
|
||||
};
|
||||
|
||||
mcasp0: mcasp@02B00000 {
|
||||
dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
crypto: crypto@4E00000 {
|
||||
compatible = "ti,sa2ul-crypto";
|
||||
|
||||
dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>, <&main_udmap 0x4001>;
|
||||
dma-names = "tx", "rx1", "rx2";
|
||||
};
|
||||
};
|
||||
|
|
|
@ -84,31 +84,31 @@ examples:
|
|||
gpu_opp_table: opp_table0 {
|
||||
compatible = "operating-points-v2";
|
||||
|
||||
opp@533000000 {
|
||||
opp-533000000 {
|
||||
opp-hz = /bits/ 64 <533000000>;
|
||||
opp-microvolt = <1250000>;
|
||||
};
|
||||
opp@450000000 {
|
||||
opp-450000000 {
|
||||
opp-hz = /bits/ 64 <450000000>;
|
||||
opp-microvolt = <1150000>;
|
||||
};
|
||||
opp@400000000 {
|
||||
opp-400000000 {
|
||||
opp-hz = /bits/ 64 <400000000>;
|
||||
opp-microvolt = <1125000>;
|
||||
};
|
||||
opp@350000000 {
|
||||
opp-350000000 {
|
||||
opp-hz = /bits/ 64 <350000000>;
|
||||
opp-microvolt = <1075000>;
|
||||
};
|
||||
opp@266000000 {
|
||||
opp-266000000 {
|
||||
opp-hz = /bits/ 64 <266000000>;
|
||||
opp-microvolt = <1025000>;
|
||||
};
|
||||
opp@160000000 {
|
||||
opp-160000000 {
|
||||
opp-hz = /bits/ 64 <160000000>;
|
||||
opp-microvolt = <925000>;
|
||||
};
|
||||
opp@100000000 {
|
||||
opp-100000000 {
|
||||
opp-hz = /bits/ 64 <100000000>;
|
||||
opp-microvolt = <912500>;
|
||||
};
|
||||
|
|
|
@ -138,31 +138,31 @@ examples:
|
|||
gpu_opp_table: opp_table0 {
|
||||
compatible = "operating-points-v2";
|
||||
|
||||
opp@533000000 {
|
||||
opp-533000000 {
|
||||
opp-hz = /bits/ 64 <533000000>;
|
||||
opp-microvolt = <1250000>;
|
||||
};
|
||||
opp@450000000 {
|
||||
opp-450000000 {
|
||||
opp-hz = /bits/ 64 <450000000>;
|
||||
opp-microvolt = <1150000>;
|
||||
};
|
||||
opp@400000000 {
|
||||
opp-400000000 {
|
||||
opp-hz = /bits/ 64 <400000000>;
|
||||
opp-microvolt = <1125000>;
|
||||
};
|
||||
opp@350000000 {
|
||||
opp-350000000 {
|
||||
opp-hz = /bits/ 64 <350000000>;
|
||||
opp-microvolt = <1075000>;
|
||||
};
|
||||
opp@266000000 {
|
||||
opp-266000000 {
|
||||
opp-hz = /bits/ 64 <266000000>;
|
||||
opp-microvolt = <1025000>;
|
||||
};
|
||||
opp@160000000 {
|
||||
opp-160000000 {
|
||||
opp-hz = /bits/ 64 <160000000>;
|
||||
opp-microvolt = <925000>;
|
||||
};
|
||||
opp@100000000 {
|
||||
opp-100000000 {
|
||||
opp-hz = /bits/ 64 <100000000>;
|
||||
opp-microvolt = <912500>;
|
||||
};
|
||||
|
|
|
@ -123,7 +123,7 @@ examples:
|
|||
samsung,syscon-phandle = <&pmu_system_controller>;
|
||||
|
||||
/* NTC thermistor is a hwmon device */
|
||||
ncp15wb473@0 {
|
||||
ncp15wb473 {
|
||||
compatible = "murata,ncp15wb473";
|
||||
pullup-uv = <1800000>;
|
||||
pullup-ohm = <47000>;
|
||||
|
|
|
@ -62,7 +62,7 @@ required:
|
|||
|
||||
examples:
|
||||
- |
|
||||
i2c@00000000 {
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gt928@5d {
|
||||
|
|
|
@ -177,7 +177,7 @@ examples:
|
|||
};
|
||||
};
|
||||
|
||||
i2c5: i2c@4807c000 {
|
||||
i2c {
|
||||
clock-frequency = <400000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
|
@ -97,14 +97,14 @@ examples:
|
|||
regulators {
|
||||
compatible = "maxim,max77650-regulator";
|
||||
|
||||
max77650_ldo: regulator@0 {
|
||||
max77650_ldo: regulator-ldo {
|
||||
regulator-compatible = "ldo";
|
||||
regulator-name = "max77650-ldo";
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <2937500>;
|
||||
};
|
||||
|
||||
max77650_sbb0: regulator@1 {
|
||||
max77650_sbb0: regulator-sbb0 {
|
||||
regulator-compatible = "sbb0";
|
||||
regulator-name = "max77650-sbb0";
|
||||
regulator-min-microvolt = <800000>;
|
||||
|
|
|
@ -370,6 +370,7 @@ examples:
|
|||
mmc3: mmc@1c12000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x1c12000 0x200>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc3_pins_a>;
|
||||
vmmc-supply = <®_vmmc3>;
|
||||
|
|
|
@ -76,6 +76,8 @@ examples:
|
|||
qfprom: eeprom@700000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x00700000 0x100000>;
|
||||
|
||||
wp-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
/* ... */
|
||||
|
|
|
@ -86,7 +86,7 @@ examples:
|
|||
#include <dt-bindings/clock/sun4i-a10-ccu.h>
|
||||
#include <dt-bindings/reset/sun4i-a10-ccu.h>
|
||||
|
||||
usbphy: phy@01c13400 {
|
||||
usbphy: phy@1c13400 {
|
||||
#phy-cells = <1>;
|
||||
compatible = "allwinner,sun4i-a10-usb-phy";
|
||||
reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
|
||||
|
|
|
@ -248,7 +248,7 @@ examples:
|
|||
};
|
||||
|
||||
//Example 3 pin groups
|
||||
pinctrl@60020000 {
|
||||
pinctrl {
|
||||
usart1_pins_a: usart1-0 {
|
||||
pins1 {
|
||||
pinmux = <STM32_PINMUX('A', 9, AF7)>;
|
||||
|
|
|
@ -191,7 +191,7 @@ patternProperties:
|
|||
|
||||
examples:
|
||||
- |
|
||||
xyzreg: regulator@0 {
|
||||
xyzreg: regulator {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <2500000>;
|
||||
regulator-always-on;
|
||||
|
|
|
@ -125,7 +125,7 @@ examples:
|
|||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
sram_a: sram@00000000 {
|
||||
sram_a: sram@0 {
|
||||
compatible = "mmio-sram";
|
||||
reg = <0x00000000 0xc000>;
|
||||
#address-cells = <1>;
|
||||
|
|
|
@ -87,7 +87,7 @@ additionalProperties: false
|
|||
|
||||
examples:
|
||||
- |
|
||||
timer {
|
||||
timer@1c20c00 {
|
||||
compatible = "allwinner,sun4i-a10-timer";
|
||||
reg = <0x01c20c00 0x400>;
|
||||
interrupts = <22>,
|
||||
|
|
Loading…
Reference in New Issue