spi: spi-sh-msiof: set hi/low Active for HW CS

Set hardware CS(CS control function on MSIOF <-> GPIO CS) polarity
according to SPI_CS_HIGH flag on spi->mode.

Signed-off-by: Takashi Yoshii <takasi-y@ops.dti.ne.jp>
Signed-off-by: Mark Brown <broonie@linaro.org>
This commit is contained in:
Takashi Yoshii 2013-12-02 03:19:15 +09:00 committed by Mark Brown
parent 5c32d29f13
commit 50a7799829
1 changed files with 9 additions and 4 deletions

View File

@ -169,7 +169,7 @@ static void sh_msiof_spi_set_clk_regs(struct sh_msiof_spi_priv *p,
static void sh_msiof_spi_set_pin_regs(struct sh_msiof_spi_priv *p,
u32 cpol, u32 cpha,
u32 tx_hi_z, u32 lsb_first)
u32 tx_hi_z, u32 lsb_first, u32 cs_high)
{
u32 tmp;
int edge;
@ -182,8 +182,12 @@ static void sh_msiof_spi_set_pin_regs(struct sh_msiof_spi_priv *p,
* 1 1 11 11 1 1
*/
sh_msiof_write(p, FCTR, 0);
sh_msiof_write(p, TMDR1, 0xe2000005 | (lsb_first << 24));
sh_msiof_write(p, RMDR1, 0x22000005 | (lsb_first << 24));
tmp = 0;
tmp |= !cs_high << 25;
tmp |= lsb_first << 24;
sh_msiof_write(p, TMDR1, 0xe0000005 | tmp);
sh_msiof_write(p, RMDR1, 0x20000005 | tmp);
tmp = 0xa0000000;
tmp |= cpol << 30; /* TSCKIZ */
@ -417,7 +421,8 @@ static void sh_msiof_spi_chipselect(struct spi_device *spi, int is_on)
sh_msiof_spi_set_pin_regs(p, !!(spi->mode & SPI_CPOL),
!!(spi->mode & SPI_CPHA),
!!(spi->mode & SPI_3WIRE),
!!(spi->mode & SPI_LSB_FIRST));
!!(spi->mode & SPI_LSB_FIRST),
!!(spi->mode & SPI_CS_HIGH));
}
/* use spi->controller data for CS (same strategy as spi_gpio) */