diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 5850ccd0dc07..1c9716381fe9 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -384,14 +384,6 @@ config MTD_REDWOOD Redwood board. If you have one of these boards and would like to use the flash chips on it, say 'Y'. -config MTD_OCELOT - tristate "Momenco Ocelot boot flash device" - depends on MOMENCO_OCELOT - help - This enables access routines for the boot flash device and for the - NVRAM on the Momenco Ocelot board. If you have one of these boards - and would like access to either of these, say 'Y'. - config MTD_SOLUTIONENGINE tristate "CFI Flash device mapped on Hitachi SolutionEngine" depends on SUPERH && MTD_CFI && MTD_REDBOOT_PARTS diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index b9019b1b196c..53fa2b55b494 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -43,7 +43,6 @@ obj-$(CONFIG_MTD_SUN_UFLASH) += sun_uflash.o obj-$(CONFIG_MTD_VMAX) += vmax301.o obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx200_docflash.o obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.o -obj-$(CONFIG_MTD_OCELOT) += ocelot.o obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o obj-$(CONFIG_MTD_PCI) += pci.o obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o diff --git a/drivers/mtd/maps/ocelot.c b/drivers/mtd/maps/ocelot.c deleted file mode 100644 index 6977963d7897..000000000000 --- a/drivers/mtd/maps/ocelot.c +++ /dev/null @@ -1,175 +0,0 @@ -/* - * $Id: ocelot.c,v 1.17 2005/11/07 11:14:27 gleixner Exp $ - * - * Flash on Momenco Ocelot - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#define OCELOT_PLD 0x2c000000 -#define FLASH_WINDOW_ADDR 0x2fc00000 -#define FLASH_WINDOW_SIZE 0x00080000 -#define FLASH_BUSWIDTH 1 -#define NVRAM_WINDOW_ADDR 0x2c800000 -#define NVRAM_WINDOW_SIZE 0x00007FF0 -#define NVRAM_BUSWIDTH 1 - -static unsigned int cacheflush = 0; - -static struct mtd_info *flash_mtd; -static struct mtd_info *nvram_mtd; - -static void ocelot_ram_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) -{ - struct map_info *map = mtd->priv; - size_t done = 0; - - /* If we use memcpy, it does word-wide writes. Even though we told the - GT64120A that it's an 8-bit wide region, word-wide writes don't work. - We end up just writing the first byte of the four to all four bytes. - So we have this loop instead */ - *retlen = len; - while(len) { - __raw_writeb(*(unsigned char *) from, map->virt + to); - from++; - to++; - len--; - } -} - -static struct mtd_partition *parsed_parts; - -struct map_info ocelot_flash_map = { - .name = "Ocelot boot flash", - .size = FLASH_WINDOW_SIZE, - .bankwidth = FLASH_BUSWIDTH, - .phys = FLASH_WINDOW_ADDR, -}; - -struct map_info ocelot_nvram_map = { - .name = "Ocelot NVRAM", - .size = NVRAM_WINDOW_SIZE, - .bankwidth = NVRAM_BUSWIDTH, - .phys = NVRAM_WINDOW_ADDR, -}; - -static const char *probes[] = { "RedBoot", NULL }; - -static int __init init_ocelot_maps(void) -{ - void *pld; - int nr_parts; - unsigned char brd_status; - - printk(KERN_INFO "Momenco Ocelot MTD mappings: Flash 0x%x at 0x%x, NVRAM 0x%x at 0x%x\n", - FLASH_WINDOW_SIZE, FLASH_WINDOW_ADDR, NVRAM_WINDOW_SIZE, NVRAM_WINDOW_ADDR); - - /* First check whether the flash jumper is present */ - pld = ioremap(OCELOT_PLD, 0x10); - if (!pld) { - printk(KERN_NOTICE "Failed to ioremap Ocelot PLD\n"); - return -EIO; - } - brd_status = readb(pld+4); - iounmap(pld); - - /* Now ioremap the NVRAM space */ - ocelot_nvram_map.virt = ioremap_nocache(NVRAM_WINDOW_ADDR, NVRAM_WINDOW_SIZE); - if (!ocelot_nvram_map.virt) { - printk(KERN_NOTICE "Failed to ioremap Ocelot NVRAM space\n"); - return -EIO; - } - - simple_map_init(&ocelot_nvram_map); - - /* And do the RAM probe on it to get an MTD device */ - nvram_mtd = do_map_probe("map_ram", &ocelot_nvram_map); - if (!nvram_mtd) { - printk("NVRAM probe failed\n"); - goto fail_1; - } - nvram_mtd->owner = THIS_MODULE; - nvram_mtd->erasesize = 16; - /* Override the write() method */ - nvram_mtd->write = ocelot_ram_write; - - /* Now map the flash space */ - ocelot_flash_map.virt = ioremap_nocache(FLASH_WINDOW_ADDR, FLASH_WINDOW_SIZE); - if (!ocelot_flash_map.virt) { - printk(KERN_NOTICE "Failed to ioremap Ocelot flash space\n"); - goto fail_2; - } - /* Now the cached version */ - ocelot_flash_map.cached = (unsigned long)__ioremap(FLASH_WINDOW_ADDR, FLASH_WINDOW_SIZE, 0); - - simple_map_init(&ocelot_flash_map); - - /* Only probe for flash if the write jumper is present */ - if (brd_status & 0x40) { - flash_mtd = do_map_probe("jedec", &ocelot_flash_map); - } else { - printk(KERN_NOTICE "Ocelot flash write jumper not present. Treating as ROM\n"); - } - /* If that failed or the jumper's absent, pretend it's ROM */ - if (!flash_mtd) { - flash_mtd = do_map_probe("map_rom", &ocelot_flash_map); - /* If we're treating it as ROM, set the erase size */ - if (flash_mtd) - flash_mtd->erasesize = 0x10000; - } - if (!flash_mtd) - goto fail3; - - add_mtd_device(nvram_mtd); - - flash_mtd->owner = THIS_MODULE; - nr_parts = parse_mtd_partitions(flash_mtd, probes, &parsed_parts, 0); - - if (nr_parts > 0) - add_mtd_partitions(flash_mtd, parsed_parts, nr_parts); - else - add_mtd_device(flash_mtd); - - return 0; - - fail3: - iounmap((void *)ocelot_flash_map.virt); - if (ocelot_flash_map.cached) - iounmap((void *)ocelot_flash_map.cached); - fail_2: - map_destroy(nvram_mtd); - fail_1: - iounmap((void *)ocelot_nvram_map.virt); - - return -ENXIO; -} - -static void __exit cleanup_ocelot_maps(void) -{ - del_mtd_device(nvram_mtd); - map_destroy(nvram_mtd); - iounmap((void *)ocelot_nvram_map.virt); - - if (parsed_parts) - del_mtd_partitions(flash_mtd); - else - del_mtd_device(flash_mtd); - map_destroy(flash_mtd); - iounmap((void *)ocelot_flash_map.virt); - if (ocelot_flash_map.cached) - iounmap((void *)ocelot_flash_map.cached); -} - -module_init(init_ocelot_maps); -module_exit(cleanup_ocelot_maps); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Red Hat, Inc. - David Woodhouse "); -MODULE_DESCRIPTION("MTD map driver for Momenco Ocelot board");