From 9186a1fd9ed190739423db84bc344d258ef3e3d7 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Fri, 26 Jul 2013 15:29:09 +0200 Subject: [PATCH 1/4] iwlwifi: dvm: fix calling ieee80211_chswitch_done() with NULL If channel switch is pending and we remove interface we can crash like showed below due to passing NULL vif to mac80211: BUG: unable to handle kernel paging request at fffffffffffff8cc IP: [] strnlen+0xd/0x40 Call Trace: [] string.isra.3+0x3e/0xd0 [] vsnprintf+0x219/0x640 [] vscnprintf+0x11/0x30 [] vprintk_emit+0x115/0x4f0 [] printk+0x61/0x63 [] ieee80211_chswitch_done+0xaf/0xd0 [mac80211] [] iwl_chswitch_done+0x34/0x40 [iwldvm] [] iwlagn_commit_rxon+0x2a3/0xdc0 [iwldvm] [] ? iwlagn_set_rxon_chain+0x180/0x2c0 [iwldvm] [] iwl_set_mode+0x36/0x40 [iwldvm] [] iwlagn_mac_remove_interface+0x8d/0x1b0 [iwldvm] [] ieee80211_do_stop+0x29d/0x7f0 [mac80211] This is because we nulify ctx->vif in iwlagn_mac_remove_interface() before calling some other functions that teardown interface. To fix just check ctx->vif on iwl_chswitch_done(). We should not call ieee80211_chswitch_done() as channel switch works were already canceled by mac80211 in ieee80211_do_stop() -> ieee80211_mgd_stop(). Resolve: https://bugzilla.redhat.com/show_bug.cgi?id=979581 Cc: stable@vger.kernel.org Reported-by: Lukasz Jagiello Signed-off-by: Stanislaw Gruszka Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/mac80211.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index 822f1a00efbb..319387263e12 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -1068,7 +1068,10 @@ void iwl_chswitch_done(struct iwl_priv *priv, bool is_success) if (test_bit(STATUS_EXIT_PENDING, &priv->status)) return; - if (test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) + if (!test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) + return; + + if (ctx->vif) ieee80211_chswitch_done(ctx->vif, is_success); } From eabc4ac5d7606a57ee2b7308cb7323ea8f60183b Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 29 Jul 2013 23:05:18 +0300 Subject: [PATCH 2/4] iwlwifi: pcie: disable L1 Active after pci_enable_device As Arjan pointed out, we mustn't do anything related to PCI configuration until the device is properly enabled with pci_enable_device(). Cc: stable@vger.kernel.org Reported-by: Arjan van de Ven Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/pcie/trans.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 96cfcdd39079..390e2f058aff 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -1502,16 +1502,16 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, spin_lock_init(&trans_pcie->reg_lock); init_waitqueue_head(&trans_pcie->ucode_write_waitq); - /* W/A - seems to solve weird behavior. We need to remove this if we - * don't want to stay in L1 all the time. This wastes a lot of power */ - pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 | - PCIE_LINK_STATE_CLKPM); - if (pci_enable_device(pdev)) { err = -ENODEV; goto out_no_pci; } + /* W/A - seems to solve weird behavior. We need to remove this if we + * don't want to stay in L1 all the time. This wastes a lot of power */ + pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 | + PCIE_LINK_STATE_CLKPM); + pci_set_master(pdev); err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36)); From 4f0c848a334ff1840a105c506883edbfaf0e57cc Mon Sep 17 00:00:00 2001 From: Guy Cohen Date: Thu, 1 Aug 2013 14:56:23 +0200 Subject: [PATCH 3/4] Revert "iwlwifi: pcie: clear RFKILL interrupt in AMPG" This reverts commit a53ee0a308b16e392e0219c585b10f329345766b. This fix causes a worse HW Error when entering RF-Kill. Signed-off-by: Guy Cohen Signed-off-by: Dor Shaish Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/iwl-prph.h | 2 -- drivers/net/wireless/iwlwifi/pcie/rx.c | 8 -------- 2 files changed, 10 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index a70c7b9d9bad..ff8cc75c189d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -97,8 +97,6 @@ #define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800) -#define APMG_RTC_INT_STT_RFKILL (0x10000000) - /* Device system time */ #define DEVICE_SYSTEM_TIME_REG 0xA0206C diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index f600e68a410a..fd848cd1583e 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -888,14 +888,6 @@ irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id) iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill); if (hw_rfkill) { - /* - * Clear the interrupt in APMG if the NIC is going down. - * Note that when the NIC exits RFkill (else branch), we - * can't access prph and the NIC will be reset in - * start_hw anyway. - */ - iwl_write_prph(trans, APMG_RTC_INT_STT_REG, - APMG_RTC_INT_STT_RFKILL); set_bit(STATUS_RFKILL, &trans_pcie->status); if (test_and_clear_bit(STATUS_HCMD_ACTIVE, &trans_pcie->status)) From 057397943eee0bf3bc01a58ee52a9a6f1810258e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 25 Jul 2013 18:39:30 +0200 Subject: [PATCH 4/4] iwlwifi: mvm: disconnect if time event scheduling fails If scheduling an important time event fails, or if we get an unexpected notification from the firmware, there isn't much we can do to recover, so just drop the connection and let higher layers retry it. Reviewed-by: Ilan Peer Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/time-event.c | 33 +++++++++++++------ 1 file changed, 23 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/time-event.c b/drivers/net/wireless/iwlwifi/mvm/time-event.c index ad9bbca99213..7fd6fbfbc1b3 100644 --- a/drivers/net/wireless/iwlwifi/mvm/time-event.c +++ b/drivers/net/wireless/iwlwifi/mvm/time-event.c @@ -138,6 +138,20 @@ static void iwl_mvm_roc_finished(struct iwl_mvm *mvm) schedule_work(&mvm->roc_done_wk); } +static bool iwl_mvm_te_check_disconnect(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + const char *errmsg) +{ + if (vif->type != NL80211_IFTYPE_STATION) + return false; + if (vif->bss_conf.assoc && vif->bss_conf.dtim_period) + return false; + if (errmsg) + IWL_ERR(mvm, "%s\n", errmsg); + ieee80211_connection_loss(vif); + return true; +} + /* * Handles a FW notification for an event that is known to the driver. * @@ -163,8 +177,13 @@ static void iwl_mvm_te_handle_notif(struct iwl_mvm *mvm, * P2P Device discoveribility, while there are other higher priority * events in the system). */ - WARN_ONCE(!le32_to_cpu(notif->status), - "Failed to schedule time event\n"); + if (WARN_ONCE(!le32_to_cpu(notif->status), + "Failed to schedule time event\n")) { + if (iwl_mvm_te_check_disconnect(mvm, te_data->vif, NULL)) { + iwl_mvm_te_clear_data(mvm, te_data); + return; + } + } if (le32_to_cpu(notif->action) & TE_NOTIF_HOST_EVENT_END) { IWL_DEBUG_TE(mvm, @@ -180,14 +199,8 @@ static void iwl_mvm_te_handle_notif(struct iwl_mvm *mvm, * By now, we should have finished association * and know the dtim period. */ - if (te_data->vif->type == NL80211_IFTYPE_STATION && - (!te_data->vif->bss_conf.assoc || - !te_data->vif->bss_conf.dtim_period)) { - IWL_ERR(mvm, - "No assocation and the time event is over already...\n"); - ieee80211_connection_loss(te_data->vif); - } - + iwl_mvm_te_check_disconnect(mvm, te_data->vif, + "No assocation and the time event is over already..."); iwl_mvm_te_clear_data(mvm, te_data); } else if (le32_to_cpu(notif->action) & TE_NOTIF_HOST_EVENT_START) { te_data->running = true;