MIPS: Netlogic: Remove memory section from built-in DT
Do not pass a memory section in the built-in DTB, and let the boot code use the values from the DRAM BARs. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5699/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
parent
a2ba6cd6e6
commit
4f848ba5a0
|
@ -9,13 +9,6 @@
|
|||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0 0x00100000 0 0x0FF00000 // 255M at 1M
|
||||
0 0x20000000 0 0xa0000000 // 2560M at 512M
|
||||
0 0xe0000000 1 0x00000000>;
|
||||
};
|
||||
|
||||
soc {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
|
|
|
@ -9,13 +9,6 @@
|
|||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0 0x00100000 0 0x0FF00000 // 255M at 1M
|
||||
0 0x20000000 0 0xa0000000 // 2560M at 512M
|
||||
0 0xe0000000 0 0x40000000>;
|
||||
};
|
||||
|
||||
soc {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
|
|
Loading…
Reference in New Issue