spi: bcm-qspi: Add BSPI spi-nor flash controller driver
This change implements BSPI driver for Broadcom BRCMSTB, NS2, NSP SoCs works in combination with the MSPI controller driver and implements flash read acceleration and implements the spi_flash_read() method. Both MSPI and BSPI controllers are needed to access spi-nor flash. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Kamal Dasu
Mark Brown
parent
44f95d87a6
commit
4e3b2d236f
|
|
@ -38,6 +38,60 @@
|
|||
|
||||
#define DRIVER_NAME "bcm_qspi"
|
||||
|
||||
|
||||
/* BSPI register offsets */
|
||||
#define BSPI_REVISION_ID 0x000
|
||||
#define BSPI_SCRATCH 0x004
|
||||
#define BSPI_MAST_N_BOOT_CTRL 0x008
|
||||
#define BSPI_BUSY_STATUS 0x00c
|
||||
#define BSPI_INTR_STATUS 0x010
|
||||
#define BSPI_B0_STATUS 0x014
|
||||
#define BSPI_B0_CTRL 0x018
|
||||
#define BSPI_B1_STATUS 0x01c
|
||||
#define BSPI_B1_CTRL 0x020
|
||||
#define BSPI_STRAP_OVERRIDE_CTRL 0x024
|
||||
#define BSPI_FLEX_MODE_ENABLE 0x028
|
||||
#define BSPI_BITS_PER_CYCLE 0x02c
|
||||
#define BSPI_BITS_PER_PHASE 0x030
|
||||
#define BSPI_CMD_AND_MODE_BYTE 0x034
|
||||
#define BSPI_BSPI_FLASH_UPPER_ADDR_BYTE 0x038
|
||||
#define BSPI_BSPI_XOR_VALUE 0x03c
|
||||
#define BSPI_BSPI_XOR_ENABLE 0x040
|
||||
#define BSPI_BSPI_PIO_MODE_ENABLE 0x044
|
||||
#define BSPI_BSPI_PIO_IODIR 0x048
|
||||
#define BSPI_BSPI_PIO_DATA 0x04c
|
||||
|
||||
/* RAF register offsets */
|
||||
#define BSPI_RAF_START_ADDR 0x100
|
||||
#define BSPI_RAF_NUM_WORDS 0x104
|
||||
#define BSPI_RAF_CTRL 0x108
|
||||
#define BSPI_RAF_FULLNESS 0x10c
|
||||
#define BSPI_RAF_WATERMARK 0x110
|
||||
#define BSPI_RAF_STATUS 0x114
|
||||
#define BSPI_RAF_READ_DATA 0x118
|
||||
#define BSPI_RAF_WORD_CNT 0x11c
|
||||
#define BSPI_RAF_CURR_ADDR 0x120
|
||||
|
||||
/* Override mode masks */
|
||||
#define BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE BIT(0)
|
||||
#define BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL BIT(1)
|
||||
#define BSPI_STRAP_OVERRIDE_CTRL_ADDR_4BYTE BIT(2)
|
||||
#define BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD BIT(3)
|
||||
#define BSPI_STRAP_OVERRIDE_CTRL_ENDAIN_MODE BIT(4)
|
||||
|
||||
#define BSPI_ADDRLEN_3BYTES 3
|
||||
#define BSPI_ADDRLEN_4BYTES 4
|
||||
|
||||
#define BSPI_RAF_STATUS_FIFO_EMPTY_MASK BIT(1)
|
||||
|
||||
#define BSPI_RAF_CTRL_START_MASK BIT(0)
|
||||
#define BSPI_RAF_CTRL_CLEAR_MASK BIT(1)
|
||||
|
||||
#define BSPI_BPP_MODE_SELECT_MASK BIT(8)
|
||||
#define BSPI_BPP_ADDR_SELECT_MASK BIT(16)
|
||||
|
||||
#define BSPI_READ_LENGTH 256
|
||||
|
||||
/* MSPI register offsets */
|
||||
#define MSPI_SPCR0_LSB 0x000
|
||||
#define MSPI_SPCR0_MSB 0x004
|
||||
|
|
@ -108,8 +162,16 @@ struct bcm_qspi_parms {
|
|||
u8 bits_per_word;
|
||||
};
|
||||
|
||||
struct bcm_xfer_mode {
|
||||
bool flex_mode;
|
||||
unsigned int width;
|
||||
unsigned int addrlen;
|
||||
unsigned int hp;
|
||||
};
|
||||
|
||||
enum base_type {
|
||||
MSPI,
|
||||
BSPI,
|
||||
CHIP_SELECT,
|
||||
BASEMAX,
|
||||
};
|
||||
|
|
@ -140,13 +202,28 @@ struct bcm_qspi {
|
|||
struct bcm_qspi_parms last_parms;
|
||||
struct qspi_trans trans_pos;
|
||||
int curr_cs;
|
||||
int bspi_maj_rev;
|
||||
int bspi_min_rev;
|
||||
int bspi_enabled;
|
||||
struct spi_flash_read_message *bspi_rf_msg;
|
||||
u32 bspi_rf_msg_idx;
|
||||
u32 bspi_rf_msg_len;
|
||||
u32 bspi_rf_msg_status;
|
||||
struct bcm_xfer_mode xfer_mode;
|
||||
u32 s3_strap_override_ctrl;
|
||||
bool bspi_mode;
|
||||
bool big_endian;
|
||||
int num_irqs;
|
||||
struct bcm_qspi_dev_id *dev_ids;
|
||||
struct completion mspi_done;
|
||||
struct completion bspi_done;
|
||||
};
|
||||
|
||||
static inline bool has_bspi(struct bcm_qspi *qspi)
|
||||
{
|
||||
return qspi->bspi_mode;
|
||||
}
|
||||
|
||||
/* Read qspi controller register*/
|
||||
static inline u32 bcm_qspi_read(struct bcm_qspi *qspi, enum base_type type,
|
||||
unsigned int offset)
|
||||
|
|
@ -161,6 +238,300 @@ static inline void bcm_qspi_write(struct bcm_qspi *qspi, enum base_type type,
|
|||
bcm_qspi_writel(qspi->big_endian, data, qspi->base[type] + offset);
|
||||
}
|
||||
|
||||
/* BSPI helpers */
|
||||
static int bcm_qspi_bspi_busy_poll(struct bcm_qspi *qspi)
|
||||
{
|
||||
int i;
|
||||
|
||||
/* this should normally finish within 10us */
|
||||
for (i = 0; i < 1000; i++) {
|
||||
if (!(bcm_qspi_read(qspi, BSPI, BSPI_BUSY_STATUS) & 1))
|
||||
return 0;
|
||||
udelay(1);
|
||||
}
|
||||
dev_warn(&qspi->pdev->dev, "timeout waiting for !busy_status\n");
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
static inline bool bcm_qspi_bspi_ver_three(struct bcm_qspi *qspi)
|
||||
{
|
||||
if (qspi->bspi_maj_rev < 4)
|
||||
return true;
|
||||
return false;
|
||||
}
|
||||
|
||||
static void bcm_qspi_bspi_flush_prefetch_buffers(struct bcm_qspi *qspi)
|
||||
{
|
||||
bcm_qspi_bspi_busy_poll(qspi);
|
||||
/* Force rising edge for the b0/b1 'flush' field */
|
||||
bcm_qspi_write(qspi, BSPI, BSPI_B0_CTRL, 1);
|
||||
bcm_qspi_write(qspi, BSPI, BSPI_B1_CTRL, 1);
|
||||
bcm_qspi_write(qspi, BSPI, BSPI_B0_CTRL, 0);
|
||||
bcm_qspi_write(qspi, BSPI, BSPI_B1_CTRL, 0);
|
||||
}
|
||||
|
||||
static int bcm_qspi_bspi_lr_is_fifo_empty(struct bcm_qspi *qspi)
|
||||
{
|
||||
return (bcm_qspi_read(qspi, BSPI, BSPI_RAF_STATUS) &
|
||||
BSPI_RAF_STATUS_FIFO_EMPTY_MASK);
|
||||
}
|
||||
|
||||
static inline u32 bcm_qspi_bspi_lr_read_fifo(struct bcm_qspi *qspi)
|
||||
{
|
||||
u32 data = bcm_qspi_read(qspi, BSPI, BSPI_RAF_READ_DATA);
|
||||
|
||||
/* BSPI v3 LR is LE only, convert data to host endianness */
|
||||
if (bcm_qspi_bspi_ver_three(qspi))
|
||||
data = le32_to_cpu(data);
|
||||
|
||||
return data;
|
||||
}
|
||||
|
||||
static inline void bcm_qspi_bspi_lr_start(struct bcm_qspi *qspi)
|
||||
{
|
||||
bcm_qspi_bspi_busy_poll(qspi);
|
||||
bcm_qspi_write(qspi, BSPI, BSPI_RAF_CTRL,
|
||||
BSPI_RAF_CTRL_START_MASK);
|
||||
}
|
||||
|
||||
static inline void bcm_qspi_bspi_lr_clear(struct bcm_qspi *qspi)
|
||||
{
|
||||
bcm_qspi_write(qspi, BSPI, BSPI_RAF_CTRL,
|
||||
BSPI_RAF_CTRL_CLEAR_MASK);
|
||||
bcm_qspi_bspi_flush_prefetch_buffers(qspi);
|
||||
}
|
||||
|
||||
static void bcm_qspi_bspi_lr_data_read(struct bcm_qspi *qspi)
|
||||
{
|
||||
u32 *buf = (u32 *)qspi->bspi_rf_msg->buf;
|
||||
u32 data = 0;
|
||||
|
||||
dev_dbg(&qspi->pdev->dev, "xfer %p rx %p rxlen %d\n", qspi->bspi_rf_msg,
|
||||
qspi->bspi_rf_msg->buf, qspi->bspi_rf_msg_len);
|
||||
while (!bcm_qspi_bspi_lr_is_fifo_empty(qspi)) {
|
||||
data = bcm_qspi_bspi_lr_read_fifo(qspi);
|
||||
if (likely(qspi->bspi_rf_msg_len >= 4) &&
|
||||
IS_ALIGNED((uintptr_t)buf, 4)) {
|
||||
buf[qspi->bspi_rf_msg_idx++] = data;
|
||||
qspi->bspi_rf_msg_len -= 4;
|
||||
} else {
|
||||
/* Read out remaining bytes, make sure*/
|
||||
u8 *cbuf = (u8 *)&buf[qspi->bspi_rf_msg_idx];
|
||||
|
||||
data = cpu_to_le32(data);
|
||||
while (qspi->bspi_rf_msg_len) {
|
||||
*cbuf++ = (u8)data;
|
||||
data >>= 8;
|
||||
qspi->bspi_rf_msg_len--;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
static void bcm_qspi_bspi_set_xfer_params(struct bcm_qspi *qspi, u8 cmd_byte,
|
||||
int bpp, int bpc, int flex_mode)
|
||||
{
|
||||
bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE, 0);
|
||||
bcm_qspi_write(qspi, BSPI, BSPI_BITS_PER_CYCLE, bpc);
|
||||
bcm_qspi_write(qspi, BSPI, BSPI_BITS_PER_PHASE, bpp);
|
||||
bcm_qspi_write(qspi, BSPI, BSPI_CMD_AND_MODE_BYTE, cmd_byte);
|
||||
bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE, flex_mode);
|
||||
}
|
||||
|
||||
static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi, int width,
|
||||
int addrlen, int hp)
|
||||
{
|
||||
int bpc = 0, bpp = 0;
|
||||
u8 command = SPINOR_OP_READ_FAST;
|
||||
int flex_mode = 1, rv = 0;
|
||||
bool spans_4byte = false;
|
||||
|
||||
dev_dbg(&qspi->pdev->dev, "set flex mode w %x addrlen %x hp %d\n",
|
||||
width, addrlen, hp);
|
||||
|
||||
if (addrlen == BSPI_ADDRLEN_4BYTES) {
|
||||
bpp = BSPI_BPP_ADDR_SELECT_MASK;
|
||||
spans_4byte = true;
|
||||
}
|
||||
|
||||
bpp |= 8;
|
||||
|
||||
switch (width) {
|
||||
case SPI_NBITS_SINGLE:
|
||||
if (addrlen == BSPI_ADDRLEN_3BYTES)
|
||||
/* default mode, does not need flex_cmd */
|
||||
flex_mode = 0;
|
||||
else
|
||||
command = SPINOR_OP_READ4_FAST;
|
||||
break;
|
||||
case SPI_NBITS_DUAL:
|
||||
bpc = 0x00000001;
|
||||
if (hp) {
|
||||
bpc |= 0x00010100; /* address and mode are 2-bit */
|
||||
bpp = BSPI_BPP_MODE_SELECT_MASK;
|
||||
command = OPCODE_DIOR;
|
||||
if (spans_4byte)
|
||||
command = OPCODE_DIOR_4B;
|
||||
} else {
|
||||
command = SPINOR_OP_READ_1_1_2;
|
||||
if (spans_4byte)
|
||||
command = SPINOR_OP_READ4_1_1_2;
|
||||
}
|
||||
break;
|
||||
case SPI_NBITS_QUAD:
|
||||
bpc = 0x00000002;
|
||||
if (hp) {
|
||||
bpc |= 0x00020200; /* address and mode are 4-bit */
|
||||
bpp = 4; /* dummy cycles */
|
||||
bpp |= BSPI_BPP_ADDR_SELECT_MASK;
|
||||
command = OPCODE_QIOR;
|
||||
if (spans_4byte)
|
||||
command = OPCODE_QIOR_4B;
|
||||
} else {
|
||||
command = SPINOR_OP_READ_1_1_4;
|
||||
if (spans_4byte)
|
||||
command = SPINOR_OP_READ4_1_1_4;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
rv = -EINVAL;
|
||||
break;
|
||||
}
|
||||
|
||||
if (rv == 0)
|
||||
bcm_qspi_bspi_set_xfer_params(qspi, command, bpp, bpc,
|
||||
flex_mode);
|
||||
|
||||
return rv;
|
||||
}
|
||||
|
||||
static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi, int width,
|
||||
int addrlen, int hp)
|
||||
{
|
||||
u32 data = bcm_qspi_read(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL);
|
||||
|
||||
dev_dbg(&qspi->pdev->dev, "set override mode w %x addrlen %x hp %d\n",
|
||||
width, addrlen, hp);
|
||||
|
||||
switch (width) {
|
||||
case SPI_NBITS_SINGLE:
|
||||
/* clear quad/dual mode */
|
||||
data &= ~(BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD |
|
||||
BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL);
|
||||
break;
|
||||
|
||||
case SPI_NBITS_QUAD:
|
||||
/* clear dual mode and set quad mode */
|
||||
data &= ~BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL;
|
||||
data |= BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD;
|
||||
break;
|
||||
case SPI_NBITS_DUAL:
|
||||
/* clear quad mode set dual mode */
|
||||
data &= ~BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD;
|
||||
data |= BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (addrlen == BSPI_ADDRLEN_4BYTES)
|
||||
/* set 4byte mode*/
|
||||
data |= BSPI_STRAP_OVERRIDE_CTRL_ADDR_4BYTE;
|
||||
else
|
||||
/* clear 4 byte mode */
|
||||
data &= ~BSPI_STRAP_OVERRIDE_CTRL_ADDR_4BYTE;
|
||||
|
||||
/* set the override mode */
|
||||
data |= BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE;
|
||||
bcm_qspi_write(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL, data);
|
||||
bcm_qspi_bspi_set_xfer_params(qspi, SPINOR_OP_READ_FAST, 0, 0, 0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bcm_qspi_bspi_set_mode(struct bcm_qspi *qspi,
|
||||
int width, int addrlen, int hp)
|
||||
{
|
||||
int error = 0;
|
||||
|
||||
/* default mode */
|
||||
qspi->xfer_mode.flex_mode = true;
|
||||
|
||||
if (!bcm_qspi_bspi_ver_three(qspi)) {
|
||||
u32 val, mask;
|
||||
|
||||
val = bcm_qspi_read(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL);
|
||||
mask = BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE;
|
||||
if (val & mask || qspi->s3_strap_override_ctrl & mask) {
|
||||
qspi->xfer_mode.flex_mode = false;
|
||||
bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE,
|
||||
0);
|
||||
|
||||
if ((val | qspi->s3_strap_override_ctrl) &
|
||||
BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL)
|
||||
width = SPI_NBITS_DUAL;
|
||||
else if ((val | qspi->s3_strap_override_ctrl) &
|
||||
BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD)
|
||||
width = SPI_NBITS_QUAD;
|
||||
|
||||
error = bcm_qspi_bspi_set_override(qspi, width, addrlen,
|
||||
hp);
|
||||
}
|
||||
}
|
||||
|
||||
if (qspi->xfer_mode.flex_mode)
|
||||
error = bcm_qspi_bspi_set_flex_mode(qspi, width, addrlen, hp);
|
||||
|
||||
if (error) {
|
||||
dev_warn(&qspi->pdev->dev,
|
||||
"INVALID COMBINATION: width=%d addrlen=%d hp=%d\n",
|
||||
width, addrlen, hp);
|
||||
} else if (qspi->xfer_mode.width != width ||
|
||||
qspi->xfer_mode.addrlen != addrlen ||
|
||||
qspi->xfer_mode.hp != hp) {
|
||||
qspi->xfer_mode.width = width;
|
||||
qspi->xfer_mode.addrlen = addrlen;
|
||||
qspi->xfer_mode.hp = hp;
|
||||
dev_dbg(&qspi->pdev->dev,
|
||||
"cs:%d %d-lane output, %d-byte address%s\n",
|
||||
qspi->curr_cs,
|
||||
qspi->xfer_mode.width,
|
||||
qspi->xfer_mode.addrlen,
|
||||
qspi->xfer_mode.hp != -1 ? ", hp mode" : "");
|
||||
}
|
||||
|
||||
return error;
|
||||
}
|
||||
|
||||
static void bcm_qspi_enable_bspi(struct bcm_qspi *qspi)
|
||||
{
|
||||
if (!has_bspi(qspi) || (qspi->bspi_enabled))
|
||||
return;
|
||||
|
||||
qspi->bspi_enabled = 1;
|
||||
if ((bcm_qspi_read(qspi, BSPI, BSPI_MAST_N_BOOT_CTRL) & 1) == 0)
|
||||
return;
|
||||
|
||||
bcm_qspi_bspi_flush_prefetch_buffers(qspi);
|
||||
udelay(1);
|
||||
bcm_qspi_write(qspi, BSPI, BSPI_MAST_N_BOOT_CTRL, 0);
|
||||
udelay(1);
|
||||
}
|
||||
|
||||
static void bcm_qspi_disable_bspi(struct bcm_qspi *qspi)
|
||||
{
|
||||
if (!has_bspi(qspi) || (!qspi->bspi_enabled))
|
||||
return;
|
||||
|
||||
qspi->bspi_enabled = 0;
|
||||
if ((bcm_qspi_read(qspi, BSPI, BSPI_MAST_N_BOOT_CTRL) & 1))
|
||||
return;
|
||||
|
||||
bcm_qspi_bspi_busy_poll(qspi);
|
||||
bcm_qspi_write(qspi, BSPI, BSPI_MAST_N_BOOT_CTRL, 1);
|
||||
udelay(1);
|
||||
}
|
||||
|
||||
static void bcm_qspi_chip_select(struct bcm_qspi *qspi, int cs)
|
||||
{
|
||||
u32 data = 0;
|
||||
|
|
@ -298,6 +669,8 @@ static void read_from_hw(struct bcm_qspi *qspi, int slots)
|
|||
struct qspi_trans tp;
|
||||
int slot;
|
||||
|
||||
bcm_qspi_disable_bspi(qspi);
|
||||
|
||||
if (slots > MSPI_NUM_CDRAM) {
|
||||
/* should never happen */
|
||||
dev_err(&qspi->pdev->dev, "%s: too many slots!\n", __func__);
|
||||
|
|
@ -368,6 +741,7 @@ static int write_to_hw(struct bcm_qspi *qspi, struct spi_device *spi)
|
|||
int slot = 0, tstatus = 0;
|
||||
u32 mspi_cdram = 0;
|
||||
|
||||
bcm_qspi_disable_bspi(qspi);
|
||||
tp = qspi->trans_pos;
|
||||
bcm_qspi_update_parms(qspi, spi, tp.trans);
|
||||
|
||||
|
|
@ -414,6 +788,9 @@ static int write_to_hw(struct bcm_qspi *qspi, struct spi_device *spi)
|
|||
write_cdram_slot(qspi, slot - 1, mspi_cdram);
|
||||
}
|
||||
|
||||
if (has_bspi(qspi))
|
||||
bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 1);
|
||||
|
||||
/* Must flush previous writes before starting MSPI operation */
|
||||
mb();
|
||||
/* Set cont | spe | spifie */
|
||||
|
|
@ -423,6 +800,118 @@ done:
|
|||
return slot;
|
||||
}
|
||||
|
||||
static int bcm_qspi_bspi_flash_read(struct spi_device *spi,
|
||||
struct spi_flash_read_message *msg)
|
||||
{
|
||||
struct bcm_qspi *qspi = spi_master_get_devdata(spi->master);
|
||||
u32 addr = 0, len, len_words;
|
||||
int ret = 0;
|
||||
unsigned long timeo = msecs_to_jiffies(100);
|
||||
|
||||
if (bcm_qspi_bspi_ver_three(qspi))
|
||||
if (msg->addr_width == BSPI_ADDRLEN_4BYTES)
|
||||
return -EIO;
|
||||
|
||||
bcm_qspi_chip_select(qspi, spi->chip_select);
|
||||
bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0);
|
||||
|
||||
/*
|
||||
* when using flex mode mode we need to send
|
||||
* the upper address byte to bspi
|
||||
*/
|
||||
if (bcm_qspi_bspi_ver_three(qspi) == false) {
|
||||
addr = msg->from & 0xff000000;
|
||||
bcm_qspi_write(qspi, BSPI,
|
||||
BSPI_BSPI_FLASH_UPPER_ADDR_BYTE, addr);
|
||||
}
|
||||
|
||||
if (!qspi->xfer_mode.flex_mode)
|
||||
addr = msg->from;
|
||||
else
|
||||
addr = msg->from & 0x00ffffff;
|
||||
|
||||
/* set BSPI RAF buffer max read length */
|
||||
len = msg->len;
|
||||
if (len > BSPI_READ_LENGTH)
|
||||
len = BSPI_READ_LENGTH;
|
||||
|
||||
if (bcm_qspi_bspi_ver_three(qspi) == true)
|
||||
addr = (addr + 0xc00000) & 0xffffff;
|
||||
|
||||
reinit_completion(&qspi->bspi_done);
|
||||
bcm_qspi_enable_bspi(qspi);
|
||||
len_words = (len + 3) >> 2;
|
||||
qspi->bspi_rf_msg = msg;
|
||||
qspi->bspi_rf_msg_status = 0;
|
||||
qspi->bspi_rf_msg_idx = 0;
|
||||
qspi->bspi_rf_msg_len = len;
|
||||
dev_dbg(&qspi->pdev->dev, "bspi xfr addr 0x%x len 0x%x", addr, len);
|
||||
|
||||
bcm_qspi_write(qspi, BSPI, BSPI_RAF_START_ADDR, addr);
|
||||
bcm_qspi_write(qspi, BSPI, BSPI_RAF_NUM_WORDS, len_words);
|
||||
bcm_qspi_write(qspi, BSPI, BSPI_RAF_WATERMARK, 0);
|
||||
|
||||
/* Must flush previous writes before starting BSPI operation */
|
||||
mb();
|
||||
|
||||
bcm_qspi_bspi_lr_start(qspi);
|
||||
if (!wait_for_completion_timeout(&qspi->bspi_done, timeo)) {
|
||||
dev_err(&qspi->pdev->dev, "timeout waiting for BSPI\n");
|
||||
ret = -ETIMEDOUT;
|
||||
} else {
|
||||
/* set the return length for the caller */
|
||||
msg->retlen = len;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int bcm_qspi_flash_read(struct spi_device *spi,
|
||||
struct spi_flash_read_message *msg)
|
||||
{
|
||||
struct bcm_qspi *qspi = spi_master_get_devdata(spi->master);
|
||||
int ret = 0;
|
||||
bool mspi_read = false;
|
||||
u32 io_width, addrlen, addr, len;
|
||||
u_char *buf;
|
||||
|
||||
buf = msg->buf;
|
||||
addr = msg->from;
|
||||
len = msg->len;
|
||||
|
||||
if (bcm_qspi_bspi_ver_three(qspi) == true) {
|
||||
/*
|
||||
* The address coming into this function is a raw flash offset.
|
||||
* But for BSPI <= V3, we need to convert it to a remapped BSPI
|
||||
* address. If it crosses a 4MB boundary, just revert back to
|
||||
* using MSPI.
|
||||
*/
|
||||
addr = (addr + 0xc00000) & 0xffffff;
|
||||
|
||||
if ((~ADDR_4MB_MASK & addr) ^
|
||||
(~ADDR_4MB_MASK & (addr + len - 1)))
|
||||
mspi_read = true;
|
||||
}
|
||||
|
||||
/* non-aligned and very short transfers are handled by MSPI */
|
||||
if (!IS_ALIGNED((uintptr_t)addr, 4) || !IS_ALIGNED((uintptr_t)buf, 4) ||
|
||||
len < 4)
|
||||
mspi_read = true;
|
||||
|
||||
if (mspi_read)
|
||||
/* this will make the m25p80 read to fallback to mspi read */
|
||||
return -EAGAIN;
|
||||
|
||||
io_width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE;
|
||||
addrlen = msg->addr_width;
|
||||
ret = bcm_qspi_bspi_set_mode(qspi, io_width, addrlen, -1);
|
||||
|
||||
if (!ret)
|
||||
ret = bcm_qspi_bspi_flash_read(spi, msg);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int bcm_qspi_transfer_one(struct spi_master *master,
|
||||
struct spi_device *spi,
|
||||
struct spi_transfer *trans)
|
||||
|
|
@ -469,12 +958,75 @@ static irqreturn_t bcm_qspi_mspi_l2_isr(int irq, void *dev_id)
|
|||
bcm_qspi_write(qspi, MSPI, MSPI_MSPI_STATUS, status);
|
||||
complete(&qspi->mspi_done);
|
||||
return IRQ_HANDLED;
|
||||
} else {
|
||||
return IRQ_NONE;
|
||||
}
|
||||
|
||||
return IRQ_NONE;
|
||||
}
|
||||
|
||||
static irqreturn_t bcm_qspi_bspi_lr_l2_isr(int irq, void *dev_id)
|
||||
{
|
||||
struct bcm_qspi_dev_id *qspi_dev_id = dev_id;
|
||||
struct bcm_qspi *qspi = qspi_dev_id->dev;
|
||||
u32 status;
|
||||
|
||||
if (qspi->bspi_enabled && qspi->bspi_rf_msg) {
|
||||
bcm_qspi_bspi_lr_data_read(qspi);
|
||||
if (qspi->bspi_rf_msg_len == 0) {
|
||||
qspi->bspi_rf_msg = NULL;
|
||||
if (qspi->bspi_rf_msg_status)
|
||||
bcm_qspi_bspi_lr_clear(qspi);
|
||||
else
|
||||
bcm_qspi_bspi_flush_prefetch_buffers(qspi);
|
||||
}
|
||||
}
|
||||
|
||||
status = (qspi_dev_id->irqp->mask & INTR_BSPI_LR_SESSION_DONE_MASK);
|
||||
if (qspi->bspi_enabled && status && qspi->bspi_rf_msg_len == 0)
|
||||
complete(&qspi->bspi_done);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static irqreturn_t bcm_qspi_bspi_lr_err_l2_isr(int irq, void *dev_id)
|
||||
{
|
||||
struct bcm_qspi_dev_id *qspi_dev_id = dev_id;
|
||||
struct bcm_qspi *qspi = qspi_dev_id->dev;
|
||||
|
||||
dev_err(&qspi->pdev->dev, "BSPI INT error\n");
|
||||
qspi->bspi_rf_msg_status = -EIO;
|
||||
complete(&qspi->bspi_done);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static const struct bcm_qspi_irq qspi_irq_tab[] = {
|
||||
{
|
||||
.irq_name = "spi_lr_fullness_reached",
|
||||
.irq_handler = bcm_qspi_bspi_lr_l2_isr,
|
||||
.mask = INTR_BSPI_LR_FULLNESS_REACHED_MASK,
|
||||
},
|
||||
{
|
||||
.irq_name = "spi_lr_session_aborted",
|
||||
.irq_handler = bcm_qspi_bspi_lr_err_l2_isr,
|
||||
.mask = INTR_BSPI_LR_SESSION_ABORTED_MASK,
|
||||
},
|
||||
{
|
||||
.irq_name = "spi_lr_impatient",
|
||||
.irq_handler = bcm_qspi_bspi_lr_err_l2_isr,
|
||||
.mask = INTR_BSPI_LR_IMPATIENT_MASK,
|
||||
},
|
||||
{
|
||||
.irq_name = "spi_lr_session_done",
|
||||
.irq_handler = bcm_qspi_bspi_lr_l2_isr,
|
||||
.mask = INTR_BSPI_LR_SESSION_DONE_MASK,
|
||||
},
|
||||
#ifdef QSPI_INT_DEBUG
|
||||
/* this interrupt is for debug purposes only, dont request irq */
|
||||
{
|
||||
.irq_name = "spi_lr_overread",
|
||||
.irq_handler = bcm_qspi_bspi_lr_err_l2_isr,
|
||||
.mask = INTR_BSPI_LR_OVERREAD_MASK,
|
||||
},
|
||||
#endif
|
||||
{
|
||||
.irq_name = "mspi_done",
|
||||
.irq_handler = bcm_qspi_mspi_l2_isr,
|
||||
|
|
@ -487,6 +1039,24 @@ static const struct bcm_qspi_irq qspi_irq_tab[] = {
|
|||
},
|
||||
};
|
||||
|
||||
static void bcm_qspi_bspi_init(struct bcm_qspi *qspi)
|
||||
{
|
||||
u32 val = 0;
|
||||
|
||||
val = bcm_qspi_read(qspi, BSPI, BSPI_REVISION_ID);
|
||||
qspi->bspi_maj_rev = (val >> 8) & 0xff;
|
||||
qspi->bspi_min_rev = val & 0xff;
|
||||
if (!(bcm_qspi_bspi_ver_three(qspi))) {
|
||||
/* Force mapping of BSPI address -> flash offset */
|
||||
bcm_qspi_write(qspi, BSPI, BSPI_BSPI_XOR_VALUE, 0);
|
||||
bcm_qspi_write(qspi, BSPI, BSPI_BSPI_XOR_ENABLE, 1);
|
||||
}
|
||||
qspi->bspi_enabled = 1;
|
||||
bcm_qspi_disable_bspi(qspi);
|
||||
bcm_qspi_write(qspi, BSPI, BSPI_B0_CTRL, 0);
|
||||
bcm_qspi_write(qspi, BSPI, BSPI_B1_CTRL, 0);
|
||||
}
|
||||
|
||||
static void bcm_qspi_hw_init(struct bcm_qspi *qspi)
|
||||
{
|
||||
struct bcm_qspi_parms parms;
|
||||
|
|
@ -501,11 +1071,17 @@ static void bcm_qspi_hw_init(struct bcm_qspi *qspi)
|
|||
parms.bits_per_word = 8;
|
||||
parms.speed_hz = qspi->max_speed_hz;
|
||||
bcm_qspi_hw_set_parms(qspi, &parms);
|
||||
|
||||
if (has_bspi(qspi))
|
||||
bcm_qspi_bspi_init(qspi);
|
||||
}
|
||||
|
||||
static void bcm_qspi_hw_uninit(struct bcm_qspi *qspi)
|
||||
{
|
||||
bcm_qspi_write(qspi, MSPI, MSPI_SPCR2, 0);
|
||||
if (has_bspi(qspi))
|
||||
bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0);
|
||||
|
||||
}
|
||||
|
||||
static const struct of_device_id bcm_qspi_of_match[] = {
|
||||
|
|
@ -515,7 +1091,7 @@ static const struct of_device_id bcm_qspi_of_match[] = {
|
|||
MODULE_DEVICE_TABLE(of, bcm_qspi_of_match);
|
||||
|
||||
int bcm_qspi_probe(struct platform_device *pdev,
|
||||
struct bcm_qspi_soc_intc *soc)
|
||||
struct bcm_qspi_soc_intc *soc_intc)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
struct bcm_qspi *qspi;
|
||||
|
|
@ -549,6 +1125,7 @@ int bcm_qspi_probe(struct platform_device *pdev,
|
|||
master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_RX_DUAL | SPI_RX_QUAD;
|
||||
master->setup = bcm_qspi_setup;
|
||||
master->transfer_one = bcm_qspi_transfer_one;
|
||||
master->spi_flash_read = bcm_qspi_flash_read;
|
||||
master->cleanup = bcm_qspi_cleanup;
|
||||
master->dev.of_node = dev->of_node;
|
||||
master->num_chipselect = NUM_CHIPSELECT;
|
||||
|
|
@ -573,6 +1150,20 @@ int bcm_qspi_probe(struct platform_device *pdev,
|
|||
goto qspi_probe_err;
|
||||
}
|
||||
|
||||
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "bspi");
|
||||
if (res) {
|
||||
qspi->base[BSPI] = devm_ioremap_resource(dev, res);
|
||||
if (IS_ERR(qspi->base[BSPI])) {
|
||||
ret = PTR_ERR(qspi->base[BSPI]);
|
||||
goto qspi_probe_err;
|
||||
}
|
||||
qspi->bspi_mode = true;
|
||||
} else {
|
||||
qspi->bspi_mode = false;
|
||||
}
|
||||
|
||||
dev_info(dev, "using %smspi mode\n", qspi->bspi_mode ? "bspi-" : "");
|
||||
|
||||
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cs_reg");
|
||||
if (res) {
|
||||
qspi->base[CHIP_SELECT] = devm_ioremap_resource(dev, res);
|
||||
|
|
@ -635,9 +1226,15 @@ int bcm_qspi_probe(struct platform_device *pdev,
|
|||
|
||||
bcm_qspi_hw_init(qspi);
|
||||
init_completion(&qspi->mspi_done);
|
||||
init_completion(&qspi->bspi_done);
|
||||
qspi->curr_cs = -1;
|
||||
|
||||
platform_set_drvdata(pdev, qspi);
|
||||
|
||||
qspi->xfer_mode.width = -1;
|
||||
qspi->xfer_mode.addrlen = -1;
|
||||
qspi->xfer_mode.hp = -1;
|
||||
|
||||
ret = devm_spi_register_master(&pdev->dev, master);
|
||||
if (ret < 0) {
|
||||
dev_err(dev, "can't register master\n");
|
||||
|
|
|
|||
|
|
@ -20,6 +20,26 @@
|
|||
#include <linux/types.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
/* BSPI interrupt masks */
|
||||
#define INTR_BSPI_LR_OVERREAD_MASK BIT(4)
|
||||
#define INTR_BSPI_LR_SESSION_DONE_MASK BIT(3)
|
||||
#define INTR_BSPI_LR_IMPATIENT_MASK BIT(2)
|
||||
#define INTR_BSPI_LR_SESSION_ABORTED_MASK BIT(1)
|
||||
#define INTR_BSPI_LR_FULLNESS_REACHED_MASK BIT(0)
|
||||
|
||||
#define BSPI_LR_INTERRUPTS_DATA \
|
||||
(INTR_BSPI_LR_SESSION_DONE_MASK | \
|
||||
INTR_BSPI_LR_FULLNESS_REACHED_MASK)
|
||||
|
||||
#define BSPI_LR_INTERRUPTS_ERROR \
|
||||
(INTR_BSPI_LR_OVERREAD_MASK | \
|
||||
INTR_BSPI_LR_IMPATIENT_MASK | \
|
||||
INTR_BSPI_LR_SESSION_ABORTED_MASK)
|
||||
|
||||
#define BSPI_LR_INTERRUPTS_ALL \
|
||||
(BSPI_LR_INTERRUPTS_ERROR | \
|
||||
BSPI_LR_INTERRUPTS_DATA)
|
||||
|
||||
/* MSPI Interrupt masks */
|
||||
#define INTR_MSPI_HALTED_MASK BIT(6)
|
||||
#define INTR_MSPI_DONE_MASK BIT(5)
|
||||
|
|
|
|||
Loading…
Reference in New Issue