UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

staging: dwc2: add driver parameter to set AHB config register value 

The dwc2 driver sets the value of the DWC2 GAHBCFG register to 0x6,
which is GAHBCFG_HBSTLEN_INCR4. But different platforms may require
different values. In particular, the Broadcom 2835 SOC used in the
Raspberry Pi needs a value of 0x10, otherwise the DWC2 controller
stops working after a short period of heavy USB traffic.

So this patch adds another driver parameter named 'ahbcfg'. The
default value is 0x6. Any platform needing a different value should
add a DT attribute to set it.

This patch also removes the 'ahb_single' driver parameter, since
that bit can now be set using 'ahbcfg'.

This patch does not add DT support to platform.c, I will leave that
to whoever owns the first platform that needs a non-default value.
(Stephen?)

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Paul Zimmerman 2013-07-16 12:22:12 -07:00 committed by Greg Kroah-Hartman
parent b39ed5c7b4
commit 4d3190e1f8
4 changed files with 25 additions and 45 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

51
drivers/staging/dwc2/core.c
View File

@ -277,7 +277,7 @@ static void dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
static int dwc2_gahbcfg_init(struct dwc2_hsotg *hsotg)
{
u32 ahbcfg = 0;
u32 ahbcfg = readl(hsotg->regs + GAHBCFG);
switch (hsotg->hwcfg2 & GHWCFG2_ARCHITECTURE_MASK) {
case GHWCFG2_EXT_DMA_ARCH:
@ -286,11 +286,11 @@ static int dwc2_gahbcfg_init(struct dwc2_hsotg *hsotg)
case GHWCFG2_INT_DMA_ARCH:
dev_dbg(hsotg->dev, "Internal DMA Mode\n");
/*
* Old value was GAHBCFG_HBSTLEN_INCR - done for
* Host mode ISOC in issue fix - vahrama
*/
ahbcfg |= GAHBCFG_HBSTLEN_INCR4;
if (hsotg->core_params->ahbcfg != -1) {
ahbcfg &= GAHBCFG_CTRL_MASK;
ahbcfg |= hsotg->core_params->ahbcfg &
~GAHBCFG_CTRL_MASK;
}
break;
case GHWCFG2_SLAVE_ONLY_ARCH:
@ -313,9 +313,6 @@ static int dwc2_gahbcfg_init(struct dwc2_hsotg *hsotg)
hsotg->core_params->dma_desc_enable = 0;
}
if (hsotg->core_params->ahb_single > 0)
ahbcfg |= GAHBCFG_AHB_SINGLE;
if (hsotg->core_params->dma_enable > 0)
ahbcfg |= GAHBCFG_DMA_EN;
@ -2586,35 +2583,13 @@ int dwc2_set_param_reload_ctl(struct dwc2_hsotg *hsotg, int val)
return retval;
}
int dwc2_set_param_ahb_single(struct dwc2_hsotg *hsotg, int val)
int dwc2_set_param_ahbcfg(struct dwc2_hsotg *hsotg, int val)
{
int valid = 1;
int retval = 0;
if (DWC2_PARAM_TEST(val, 0, 1)) {
if (val >= 0) {
dev_err(hsotg->dev,
"'%d' invalid for parameter ahb_single\n", val);
dev_err(hsotg->dev, "ahb_single must be 0 or 1\n");
}
valid = 0;
}
if (val > 0 && hsotg->snpsid < DWC2_CORE_REV_2_94a)
valid = 0;
if (!valid) {
if (val >= 0)
dev_err(hsotg->dev,
"%d invalid for parameter ahb_single. Check HW configuration.\n",
val);
val = 0;
dev_dbg(hsotg->dev, "Setting ahb_single to %d\n", val);
retval = -EINVAL;
}
hsotg->core_params->ahb_single = val;
return retval;
if (val != -1)
hsotg->core_params->ahbcfg = val;
else
hsotg->core_params->ahbcfg = GAHBCFG_HBSTLEN_INCR4;
return 0;
}
int dwc2_set_param_otg_ver(struct dwc2_hsotg *hsotg, int val)
@ -2681,7 +2656,7 @@ int dwc2_set_parameters(struct dwc2_hsotg *hsotg,
retval |= dwc2_set_param_en_multiple_tx_fifo(hsotg,
params->en_multiple_tx_fifo);
retval |= dwc2_set_param_reload_ctl(hsotg, params->reload_ctl);
retval |= dwc2_set_param_ahb_single(hsotg, params->ahb_single);
retval |= dwc2_set_param_ahbcfg(hsotg, params->ahbcfg);
retval |= dwc2_set_param_otg_ver(hsotg, params->otg_ver);
return retval;

13
drivers/staging/dwc2/core.h
View File

@ -150,10 +150,11 @@ enum dwc2_lx_state {
* are enabled
* @reload_ctl: True to allow dynamic reloading of HFIR register during
* runtime
* @ahb_single: This bit enables SINGLE transfers for remainder data in
* a transfer for DMA mode of operation.
* 0 - remainder data will be sent using INCR burst size
* 1 - remainder data will be sent using SINGLE burst size
* @ahbcfg: This field allows the default value of the GAHBCFG
* register to be overridden
* -1 - GAHBCFG value will not be overridden
* all others - GAHBCFG value will be overridden with
* this value
* @otg_ver: OTG version supported
* 0 - 1.3
* 1 - 2.0
@ -189,7 +190,7 @@ struct dwc2_core_params {
int host_ls_low_power_phy_clk;
int ts_dline;
int reload_ctl;
int ahb_single;
int ahbcfg;
};
/**
@ -643,7 +644,7 @@ extern int dwc2_set_param_en_multiple_tx_fifo(struct dwc2_hsotg *hsotg,
extern int dwc2_set_param_reload_ctl(struct dwc2_hsotg *hsotg, int val);
extern int dwc2_set_param_ahb_single(struct dwc2_hsotg *hsotg, int val);
extern int dwc2_set_param_ahbcfg(struct dwc2_hsotg *hsotg, int val);
extern int dwc2_set_param_otg_ver(struct dwc2_hsotg *hsotg, int val);

4
drivers/staging/dwc2/hw.h
View File

@ -78,6 +78,10 @@
#define GAHBCFG_HBSTLEN_INCR8 (5 << 1)
#define GAHBCFG_HBSTLEN_INCR16 (7 << 1)
#define GAHBCFG_GLBL_INTR_EN (1 << 0)
#define GAHBCFG_CTRL_MASK (GAHBCFG_P_TXF_EMP_LVL | \
GAHBCFG_NP_TXF_EMP_LVL | \
GAHBCFG_DMA_EN | \
GAHBCFG_GLBL_INTR_EN)
#define GUSBCFG HSOTG_REG(0x00C)
#define GUSBCFG_FORCEDEVMODE (1 << 30)

2
drivers/staging/dwc2/pci.c
View File

@ -83,7 +83,7 @@ static const struct dwc2_core_params dwc2_module_params = {
.host_ls_low_power_phy_clk = -1,
.ts_dline = -1,
.reload_ctl = -1,
.ahb_single = -1,
.ahbcfg = -1,
};
/**