e1000e: 82579: workaround for link drop issue
When connected to certain switches, the 82579 PHY might drop link unexpectedly. Work around the issue by setting the Mean Square Error higher than the hardware default. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This commit is contained in:
parent
56032be77c
commit
4d24136c8e
|
@ -145,6 +145,8 @@
|
|||
#define I82579_EMI_ADDR 0x10
|
||||
#define I82579_EMI_DATA 0x11
|
||||
#define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */
|
||||
#define I82579_MSE_THRESHOLD 0x084F /* Mean Square Error Threshold */
|
||||
#define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */
|
||||
|
||||
/* Strapping Option Register - RO */
|
||||
#define E1000_STRAP 0x0000C
|
||||
|
@ -1669,6 +1671,26 @@ static s32 e1000_lv_phy_workarounds_ich8lan(struct e1000_hw *hw)
|
|||
/* Set MDIO slow mode before any other MDIO access */
|
||||
ret_val = e1000_set_mdio_slow_mode_hv(hw);
|
||||
|
||||
ret_val = hw->phy.ops.acquire(hw);
|
||||
if (ret_val)
|
||||
goto out;
|
||||
ret_val = hw->phy.ops.write_reg_locked(hw, I82579_EMI_ADDR,
|
||||
I82579_MSE_THRESHOLD);
|
||||
if (ret_val)
|
||||
goto release;
|
||||
/* set MSE higher to enable link to stay up when noise is high */
|
||||
ret_val = hw->phy.ops.write_reg_locked(hw, I82579_EMI_DATA, 0x0034);
|
||||
if (ret_val)
|
||||
goto release;
|
||||
ret_val = hw->phy.ops.write_reg_locked(hw, I82579_EMI_ADDR,
|
||||
I82579_MSE_LINK_DOWN);
|
||||
if (ret_val)
|
||||
goto release;
|
||||
/* drop link after 5 times MSE threshold was reached */
|
||||
ret_val = hw->phy.ops.write_reg_locked(hw, I82579_EMI_DATA, 0x0005);
|
||||
release:
|
||||
hw->phy.ops.release(hw);
|
||||
|
||||
out:
|
||||
return ret_val;
|
||||
}
|
||||
|
|
Loading…
Reference in New Issue