OMAP1: Amstrad Delta: update board initialization code forcomplete modem IRQ GPIO line setup

In case of Amstrad Delta modem utilized GPIO line, interrupt is requested from
standard serial8250 driver code without first requesting the GPIO pin itself.
Even if it works with default OMAP GPIO interrupt handler, it appeared not
compatible with recent, optimized version of the board GPIO FIQ handler,
required for fast processing of interrupts generated by other GPIO pin that a
serial keyboard clock hangs off.

This patch fills the board specific modem initialization routine with common
GPIO line reservation and direction setup.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Janusz Krzysztofik 2010-04-28 01:05:47 +00:00 committed by Tony Lindgren
parent 11f9562a42
commit 4cb2dc67d1
1 changed files with 11 additions and 1 deletions

View File

@ -263,8 +263,18 @@ static struct platform_device ams_delta_modem_device = {
static int __init ams_delta_modem_init(void)
{
int err;
omap_cfg_reg(M14_1510_GPIO2);
ams_delta_modem_ports[0].irq = gpio_to_irq(2);
ams_delta_modem_ports[0].irq =
gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
err = gpio_request(AMS_DELTA_GPIO_PIN_MODEM_IRQ, "modem");
if (err) {
pr_err("Couldn't request gpio pin for modem\n");
return err;
}
gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
ams_delta_latch2_write(
AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC,