UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

mtd: omap2: fix some typos in comments 

Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
This commit is contained in:
Peter Meerwald 2012-07-19 13:21:04 +02:00 committed by David Woodhouse
parent bf7a01bf79
commit 4cacbe226f
1 changed files with 5 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
drivers/mtd/nand/omap2.c
View File

@ -347,7 +347,7 @@ static void omap_nand_dma_callback(void *data)
}
/*
* omap_nand_dma_transfer: configer and start dma transfer
* omap_nand_dma_transfer: configure and start dma transfer
* @mtd: MTD device structure
* @addr: virtual address in RAM of source/destination
* @len: number of data bytes to be transferred
@ -463,7 +463,7 @@ static void omap_write_buf_dma_pref(struct mtd_info *mtd,
}
/*
* omap_nand_irq - GMPC irq handler
* omap_nand_irq - GPMC irq handler
* @this_irq: gpmc irq number
* @dev: omap_nand_info structure pointer is passed here
*/
@ -1205,8 +1205,8 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
/*
* If RDY/BSY line is connected to OMAP then use the omap ready
* funcrtion and the generic nand_wait function which reads the status
* register after monitoring the RDY/BSY line.Otherwise use a standard
* function and the generic nand_wait function which reads the status
* register after monitoring the RDY/BSY line. Otherwise use a standard
* chip delay which is slightly more than tR (AC Timing) of the NAND
* device and read status register until you get a failure or success
*/
@ -1287,7 +1287,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
info->nand.verify_buf = omap_verify_buf;
/* selsect the ecc type */
/* select the ecc type */
if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_DEFAULT)
info->nand.ecc.mode = NAND_ECC_SOFT;
else if ((pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW) ||