From 146a08d2d646983ebd2e510405e7554364675e39 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Sun, 11 May 2014 10:47:12 +0200 Subject: [PATCH 1/4] net: cdc_mbim: optionally use VLAN ID 4094 for IP session 0 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The cdc_mbim driver maps 802.1q VLANs to MBIM IP and DSS sessions. MBIM IP session 0 is handled as an exception and is mapped to untagged frames. This patch adds optional support for remapping MBIM IP session 0 to 802.1q VLAN ID 4094 instead. The default behaviour is not changed. The new behaviour is triggered by adding a link for this previously unsupported VLAN. The untagged mapping was chosen initially to support the assumed most common use case: Most current MBIM devices only support a single IP session (i.e. session 0 only), and using untagged frames lets the users completely ignore the additonal complexity of the multiplexing layer. But when the multiplexing features of MBIM are used, then this netdev gets a double meaning: It becomes the master interface for all the VLAN subdevs the additional sessions are mapped to, while still serving as the untagged IP interface for session 0. This can be problematic, especially when using Device Service Streams (DSS), as have become apparent recently with the availability of devices with real DSS support. Some use cases need to e.g set a MTU which is higher than allowed for IP Session 0. The dual role also leads to the situation where the IP Session 0 interface cannot be taken down without breaking unrelated IP or DSS sessions - a devastating side effect which applications managing a simple IP session cannot be expected to be aware of. A typical DHCP client will assume that it should bring the interface down after releasing the IP lease. These problems can be avoided by tagging IP session 0 packets too, making this session similar to all other multiplexed sessions. This redefines the main netdev as an upper master interface only. Cc: Greg Suarez Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/cdc_mbim.c | 74 ++++++++++++++++++++++++++++++++++---- 1 file changed, 68 insertions(+), 6 deletions(-) diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c index 0ab79fca822c..694a8790f695 100644 --- a/drivers/net/usb/cdc_mbim.c +++ b/drivers/net/usb/cdc_mbim.c @@ -24,13 +24,21 @@ #include #include +/* alternative VLAN for IP session 0 if not untagged */ +#define MBIM_IPS0_VID 4094 + /* driver specific data - must match cdc_ncm usage */ struct cdc_mbim_state { struct cdc_ncm_ctx *ctx; atomic_t pmcount; struct usb_driver *subdriver; - struct usb_interface *control; - struct usb_interface *data; + unsigned long _unused; + unsigned long flags; +}; + +/* flags for the cdc_mbim_state.flags field */ +enum cdc_mbim_flags { + FLAG_IPS0_VLAN = 1 << 0, /* IP session 0 is tagged */ }; /* using a counter to merge subdriver requests with our own into a combined state */ @@ -62,6 +70,42 @@ static int cdc_mbim_wdm_manage_power(struct usb_interface *intf, int status) return cdc_mbim_manage_power(dev, status); } +static int cdc_mbim_rx_add_vid(struct net_device *netdev, __be16 proto, u16 vid) +{ + struct usbnet *dev = netdev_priv(netdev); + struct cdc_mbim_state *info = (void *)&dev->data; + + /* creation of this VLAN is a request to tag IP session 0 */ + if (vid == MBIM_IPS0_VID) + info->flags |= FLAG_IPS0_VLAN; + else + if (vid >= 512) /* we don't map these to MBIM session */ + return -EINVAL; + return 0; +} + +static int cdc_mbim_rx_kill_vid(struct net_device *netdev, __be16 proto, u16 vid) +{ + struct usbnet *dev = netdev_priv(netdev); + struct cdc_mbim_state *info = (void *)&dev->data; + + /* this is a request for an untagged IP session 0 */ + if (vid == MBIM_IPS0_VID) + info->flags &= ~FLAG_IPS0_VLAN; + return 0; +} + +static const struct net_device_ops cdc_mbim_netdev_ops = { + .ndo_open = usbnet_open, + .ndo_stop = usbnet_stop, + .ndo_start_xmit = usbnet_start_xmit, + .ndo_tx_timeout = usbnet_tx_timeout, + .ndo_change_mtu = usbnet_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, + .ndo_vlan_rx_add_vid = cdc_mbim_rx_add_vid, + .ndo_vlan_rx_kill_vid = cdc_mbim_rx_kill_vid, +}; static int cdc_mbim_bind(struct usbnet *dev, struct usb_interface *intf) { @@ -101,7 +145,10 @@ static int cdc_mbim_bind(struct usbnet *dev, struct usb_interface *intf) dev->net->flags |= IFF_NOARP; /* no need to put the VLAN tci in the packet headers */ - dev->net->features |= NETIF_F_HW_VLAN_CTAG_TX; + dev->net->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_FILTER; + + /* monitor VLAN additions and removals */ + dev->net->netdev_ops = &cdc_mbim_netdev_ops; err: return ret; } @@ -164,12 +211,24 @@ static struct sk_buff *cdc_mbim_tx_fixup(struct usbnet *dev, struct sk_buff *skb skb_pull(skb, ETH_HLEN); } + /* Is IP session <0> tagged too? */ + if (info->flags & FLAG_IPS0_VLAN) { + /* drop all untagged packets */ + if (!tci) + goto error; + /* map MBIM_IPS0_VID to IPS<0> */ + if (tci == MBIM_IPS0_VID) + tci = 0; + } + /* mapping VLANs to MBIM sessions: - * no tag => IPS session <0> + * no tag => IPS session <0> if !FLAG_IPS0_VLAN * 1 - 255 => IPS session * 256 - 511 => DSS session - * 512 - 4095 => unsupported, drop + * 512 - 4093 => unsupported, drop + * 4094 => IPS session <0> if FLAG_IPS0_VLAN */ + switch (tci & 0x0f00) { case 0x0000: /* VLAN ID 0 - 255 */ if (!is_ip) @@ -268,7 +327,7 @@ static struct sk_buff *cdc_mbim_process_dgram(struct usbnet *dev, u8 *buf, size_ __be16 proto = htons(ETH_P_802_3); struct sk_buff *skb = NULL; - if (tci < 256) { /* IPS session? */ + if (tci < 256 || tci == MBIM_IPS0_VID) { /* IPS session? */ if (len < sizeof(struct iphdr)) goto err; @@ -338,6 +397,9 @@ next_ndp: case cpu_to_le32(USB_CDC_MBIM_NDP16_IPS_SIGN): c = (u8 *)&ndp16->dwSignature; tci = c[3]; + /* tag IPS<0> packets too if MBIM_IPS0_VID exists */ + if (!tci && info->flags & FLAG_IPS0_VLAN) + tci = MBIM_IPS0_VID; break; case cpu_to_le32(USB_CDC_MBIM_NDP16_DSS_SIGN): c = (u8 *)&ndp16->dwSignature; From 6e1b3095ddd2aa5286c8219ee19ab77c0398b43f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Sun, 11 May 2014 10:47:13 +0200 Subject: [PATCH 2/4] net: cdc_mbim: reject IP packets on DSS VLANs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit DSS VLANs are pseudo network interfaces representing arbitrary data streams, and specifically not IP. Preventing spurious IP packets can sometimes be a hassle. The kernel will for example send an IPv6 Router Solicit when the interface is brought up unless the user has been careful enough to disable IPv6 first. Such packets forwared to a MBIM DSS session will look like spurious noise to the device, and can cause it to log an error or even malfunction. Drop all IP packets on the designated DSS VLANs to prevent such unwanted spurious transmissions. Cc: Greg Suarez Reported-by: Arnaud Desmier Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/cdc_mbim.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c index 694a8790f695..80d27719ba38 100644 --- a/drivers/net/usb/cdc_mbim.c +++ b/drivers/net/usb/cdc_mbim.c @@ -237,6 +237,8 @@ static struct sk_buff *cdc_mbim_tx_fixup(struct usbnet *dev, struct sk_buff *skb c[3] = tci; break; case 0x0100: /* VLAN ID 256 - 511 */ + if (is_ip) + goto error; sign = cpu_to_le32(USB_CDC_MBIM_NDP16_DSS_SIGN); c = (u8 *)&sign; c[3] = tci; From a563babeb5fbe721a046adf6f1cdc02e0a207c8d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Sun, 11 May 2014 10:47:14 +0200 Subject: [PATCH 3/4] net: cdc_mbim: add driver documentation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit An initial attempt on describing some of the odd APIs provided by this driver. Cc: Greg Suarez Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- Documentation/networking/cdc_mbim.txt | 339 ++++++++++++++++++++++++++ 1 file changed, 339 insertions(+) create mode 100644 Documentation/networking/cdc_mbim.txt diff --git a/Documentation/networking/cdc_mbim.txt b/Documentation/networking/cdc_mbim.txt new file mode 100644 index 000000000000..a15ea602aa52 --- /dev/null +++ b/Documentation/networking/cdc_mbim.txt @@ -0,0 +1,339 @@ + cdc_mbim - Driver for CDC MBIM Mobile Broadband modems + ======================================================== + +The cdc_mbim driver supports USB devices conforming to the "Universal +Serial Bus Communications Class Subclass Specification for Mobile +Broadband Interface Model" [1], which is a further development of +"Universal Serial Bus Communications Class Subclass Specifications for +Network Control Model Devices" [2] optimized for Mobile Broadband +devices, aka "3G/LTE modems". + + +Command Line Parameters +======================= + +The cdc_mbim driver has no parameters of its own. But the probing +behaviour for NCM 1.0 backwards compatible MBIM functions (an +"NCM/MBIM function" as defined in section 3.2 of [1]) is affected +by a cdc_ncm driver parameter: + +prefer_mbim +----------- +Type: Boolean +Valid Range: N/Y (0-1) +Default Value: Y (MBIM is preferred) + +This parameter sets the system policy for NCM/MBIM functions. Such +functions will be handled by either the cdc_ncm driver or the cdc_mbim +driver depending on the prefer_mbim setting. Setting prefer_mbim=N +makes the cdc_mbim driver ignore these functions and lets the cdc_ncm +driver handle them instead. + +The parameter is writable, and can be changed at any time. A manual +unbind/bind is required to make the change effective for NCM/MBIM +functions bound to the "wrong" driver + + +Basic usage +=========== + +MBIM functions are inactive when unmanaged. The cdc_mbim driver only +provides an userspace interface to the MBIM control channel, and will +not participate in the management of the function. This implies that a +userspace MBIM management application always is required to enable a +MBIM function. + +Such userspace applications includes, but are not limited to: + - mbimcli (included with the libmbim [3] library), and + - ModemManager [4] + +Establishing a MBIM IP session reequires at least these actions by the +management application: + - open the control channel + - configure network connection settings + - connect to network + - configure IP interface + +Management application development +---------------------------------- +The driver <-> userspace interfaces are described below. The MBIM +control channel protocol is described in [1]. + + +MBIM control channel userspace ABI +================================== + +/dev/cdc-wdmX character device +------------------------------ +The driver creates a two-way pipe to the MBIM function control channel +using the cdc-wdm driver as a subdriver. The userspace end of the +control channel pipe is a /dev/cdc-wdmX character device. + +The cdc_mbim driver does not process or police messages on the control +channel. The channel is fully delegated to the userspace management +application. It is therefore up to this application to ensure that it +complies with all the control channel requirements in [1]. + +The cdc-wdmX device is created as a child of the MBIM control +interface USB device. The character device associated with a specific +MBIM function can be looked up using sysfs. For example: + + bjorn@nemi:~$ ls /sys/bus/usb/drivers/cdc_mbim/2-4:2.12/usbmisc + cdc-wdm0 + + bjorn@nemi:~$ grep . /sys/bus/usb/drivers/cdc_mbim/2-4:2.12/usbmisc/cdc-wdm0/dev + 180:0 + + +USB configuration descriptors +----------------------------- +The wMaxControlMessage field of the CDC MBIM functional descriptor +limits the maximum control message size. The managament application is +responsible for negotiating a control message size complying with the +requirements in section 9.3.1 of [1], taking this descriptor field +into consideration. + +The userspace application can access the CDC MBIM functional +descriptor of a MBIM function using either of the two USB +configuration descriptor kernel interfaces described in [6] or [7]. + +See also the ioctl documentation below. + + +Fragmentation +------------- +The userspace application is responsible for all control message +fragmentation and defragmentaion, as described in section 9.5 of [1]. + + +/dev/cdc-wdmX write() +--------------------- +The MBIM control messages from the management application *must not* +exceed the negotiated control message size. + + +/dev/cdc-wdmX read() +-------------------- +The management application *must* accept control messages of up the +negotiated control message size. + + +/dev/cdc-wdmX ioctl() +-------------------- +IOCTL_WDM_MAX_COMMAND: Get Maximum Command Size +This ioctl returns the wMaxControlMessage field of the CDC MBIM +functional descriptor for MBIM devices. This is intended as a +convenience, eliminating the need to parse the USB descriptors from +userspace. + + #include + #include + #include + #include + #include + int main() + { + __u16 max; + int fd = open("/dev/cdc-wdm0", O_RDWR); + if (!ioctl(fd, IOCTL_WDM_MAX_COMMAND, &max)) + printf("wMaxControlMessage is %d\n", max); + } + + +Custom device services +---------------------- +The MBIM specification allows vendors to freely define additional +services. This is fully supported by the cdc_mbim driver. + +Support for new MBIM services, including vendor specified services, is +implemented entirely in userspace, like the rest of the MBIM control +protocol + +New services should be registered in the MBIM Registry [5]. + + + +MBIM data channel userspace ABI +=============================== + +wwanY network device +-------------------- +The cdc_mbim driver represents the MBIM data channel as a single +network device of the "wwan" type. This network device is initially +mapped to MBIM IP session 0. + + +Multiplexed IP sessions (IPS) +----------------------------- +MBIM allows multiplexing up to 256 IP sessions over a single USB data +channel. The cdc_mbim driver models such IP sessions as 802.1q VLAN +subdevices of the master wwanY device, mapping MBIM IP session Z to +VLAN ID Z for all values of Z greater than 0. + +The device maximum Z is given in the MBIM_DEVICE_CAPS_INFO structure +described in section 10.5.1 of [1]. + +The userspace management application is responsible for adding new +VLAN links prior to establishing MBIM IP sessions where the SessionId +is greater than 0. These links can be added by using the normal VLAN +kernel interfaces, either ioctl or netlink. + +For example, adding a link for a MBIM IP session with SessionId 3: + + ip link add link wwan0 name wwan0.3 type vlan id 3 + +The driver will automatically map the "wwan0.3" network device to MBIM +IP session 3. + + +Device Service Streams (DSS) +---------------------------- +MBIM also allows up to 256 non-IP data streams to be multiplexed over +the same shared USB data channel. The cdc_mbim driver models these +sessions as another set of 802.1q VLAN subdevices of the master wwanY +device, mapping MBIM DSS session A to VLAN ID (256 + A) for all values +of A. + +The device maximum A is given in the MBIM_DEVICE_SERVICES_INFO +structure described in section 10.5.29 of [1]. + +The DSS VLAN subdevices are used as a practical interface between the +shared MBIM data channel and a MBIM DSS aware userspace application. +It is not intended to be presented as-is to an end user. The +assumption is that an userspace application initiating a DSS session +also takes care of the necessary framing of the DSS data, presenting +the stream to the end user in an appropriate way for the stream type. + +The network device ABI requires a dummy ethernet header for every DSS +data frame being transported. The contents of this header is +arbitrary, with the following exceptions: + - TX frames using an IP protocol (0x0800 or 0x86dd) will be dropped + - RX frames will have the protocol field set to ETH_P_802_3 (but will + not be properly formatted 802.3 frames) + - RX frames will have the destination address set to the hardware + address of the master device + +The DSS supporting userspace management application is responsible for +adding the dummy ethernet header on TX and stripping it on RX. + +This is a simple example using tools commonly available, exporting +DssSessionId 5 as a pty character device pointed to by a /dev/nmea +symlink: + + ip link add link wwan0 name wwan0.dss5 type vlan id 261 + ip link set dev wwan0.dss5 up + socat INTERFACE:wwan0.dss5,type=2 PTY:,echo=0,link=/dev/nmea + +This is only an example, most suitable for testing out a DSS +service. Userspace applications supporting specific MBIM DSS services +are expected to use the tools and programming interfaces required by +that service. + +Note that adding VLAN links for DSS sessions is entirely optional. A +management application may instead choose to bind a packet socket +directly to the master network device, using the received VLAN tags to +map frames to the correct DSS session and adding 18 byte VLAN ethernet +headers with the appropriate tag on TX. In this case using a socket +filter is recommended, matching only the DSS VLAN subset. This avoid +unnecessary copying of unrelated IP session data to userspace. For +example: + + static struct sock_filter dssfilter[] = { + /* use special negative offsets to get VLAN tag */ + BPF_STMT(BPF_LD|BPF_B|BPF_ABS, SKF_AD_OFF + SKF_AD_VLAN_TAG_PRESENT), + BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, 1, 0, 6), /* true */ + + /* verify DSS VLAN range */ + BPF_STMT(BPF_LD|BPF_H|BPF_ABS, SKF_AD_OFF + SKF_AD_VLAN_TAG), + BPF_JUMP(BPF_JMP|BPF_JGE|BPF_K, 256, 0, 4), /* 256 is first DSS VLAN */ + BPF_JUMP(BPF_JMP|BPF_JGE|BPF_K, 512, 3, 0), /* 511 is last DSS VLAN */ + + /* verify ethertype */ + BPF_STMT(BPF_LD|BPF_H|BPF_ABS, 2 * ETH_ALEN), + BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, ETH_P_802_3, 0, 1), + + BPF_STMT(BPF_RET|BPF_K, (u_int)-1), /* accept */ + BPF_STMT(BPF_RET|BPF_K, 0), /* ignore */ + }; + + + +Tagged IP session 0 VLAN +------------------------ +As described above, MBIM IP session 0 is treated as special by the +driver. It is initially mapped to untagged frames on the wwanY +network device. + +This mapping implies a few restrictions on multiplexed IPS and DSS +sessions, which may not always be practical: + - no IPS or DSS session can use a frame size greater than the MTU on + IP session 0 + - no IPS or DSS session can be in the up state unless the network + device representing IP session 0 also is up + +These problems can be avoided by optionally making the driver map IP +session 0 to a VLAN subdevice, similar to all other IP sessions. This +behaviour is triggered by adding a VLAN link for the magic VLAN ID +4094. The driver will then immediately start mapping MBIM IP session +0 to this VLAN, and will drop untagged frames on the master wwanY +device. + +Tip: It might be less confusing to the end user to name this VLAN +subdevice after the MBIM SessionID instead of the VLAN ID. For +example: + + ip link add link wwan0 name wwan0.0 type vlan id 4094 + + +VLAN mapping +------------ + +Summarizing the cdc_mbim driver mapping described above, we have this +relationship between VLAN tags on the wwanY network device and MBIM +sessions on the shared USB data channel: + + VLAN ID MBIM type MBIM SessionID Notes + --------------------------------------------------------- + untagged IPS 0 a) + 1 - 255 IPS 1 - 255 + 256 - 511 DSS 0 - 255 + 512 - 4093 b) + 4094 IPS 0 c) + + a) if no VLAN ID 4094 link exists, else dropped + b) unsupported VLAN range, unconditionally dropped + c) if a VLAN ID 4094 link exists, else dropped + + + + +References +========== + +[1] USB Implementers Forum, Inc. - "Universal Serial Bus + Communications Class Subclass Specification for Mobile Broadband + Interface Model", Revision 1.0 (Errata 1), May 1, 2013 + - http://www.usb.org/developers/docs/devclass_docs/ + +[2] USB Implementers Forum, Inc. - "Universal Serial Bus + Communications Class Subclass Specifications for Network Control + Model Devices", Revision 1.0 (Errata 1), November 24, 2010 + - http://www.usb.org/developers/docs/devclass_docs/ + +[3] libmbim - "a glib-based library for talking to WWAN modems and + devices which speak the Mobile Interface Broadband Model (MBIM) + protocol" + - http://www.freedesktop.org/wiki/Software/libmbim/ + +[4] ModemManager - "a DBus-activated daemon which controls mobile + broadband (2G/3G/4G) devices and connections" + - http://www.freedesktop.org/wiki/Software/ModemManager/ + +[5] "MBIM (Mobile Broadband Interface Model) Registry" + - http://compliance.usb.org/mbim/ + +[6] "/proc/bus/usb filesystem output" + - Documentation/usb/proc_usb_info.txt + +[7] "/sys/bus/usb/devices/.../descriptors" + - Documentation/ABI/stable/sysfs-bus-usb From 50a0ffaf75e9d2d97200b523f2c600f40e9756b1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Sun, 11 May 2014 10:47:15 +0200 Subject: [PATCH 4/4] net: cdc_ncm/cdc_mbim: rework probing of NCM/MBIM functions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The NCM class match in the cdc_mbim driver is confusing and cause unexpected behaviour. The USB core guarantees that a USB interface is in altsetting 0 when probing starts. This means that devices implementing a NCM 1.0 backwards compatible MBIM function (a "NCM/MBIM function") always hit the NCM entry in the cdc_mbim driver match table. Such functions will never match any of the MBIM entries. This causes unexpeced behaviour for cases where the NCM and MBIM entries are differet, which is currently the case for all except Ericsson devices. Improve the probing of NCM/MBIM functions by looking up the device again in the cdc_mbim match table after switching to the MBIM identity. The shared altsetting selection is updated to better accommodate the new probing logic, returning the preferred altsetting for the control interface instead of the data interface. The control interface altsetting update is moved to the cdc_mbim driver. It is never necessary to change the control interface altsetting for NCM. Cc: Greg Suarez Reported by: Yu-an Shih Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/cdc_mbim.c | 43 +++++++++++++++++++++++++++++++++++-- drivers/net/usb/cdc_ncm.c | 27 +++++++++++------------ include/linux/usb/cdc_ncm.h | 2 +- 3 files changed, 55 insertions(+), 17 deletions(-) diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c index 80d27719ba38..bc23273d0455 100644 --- a/drivers/net/usb/cdc_mbim.c +++ b/drivers/net/usb/cdc_mbim.c @@ -107,15 +107,54 @@ static const struct net_device_ops cdc_mbim_netdev_ops = { .ndo_vlan_rx_kill_vid = cdc_mbim_rx_kill_vid, }; +/* Change the control interface altsetting and update the .driver_info + * pointer if the matching entry after changing class codes points to + * a different struct + */ +static int cdc_mbim_set_ctrlalt(struct usbnet *dev, struct usb_interface *intf, u8 alt) +{ + struct usb_driver *driver = to_usb_driver(intf->dev.driver); + const struct usb_device_id *id; + struct driver_info *info; + int ret; + + ret = usb_set_interface(dev->udev, + intf->cur_altsetting->desc.bInterfaceNumber, + alt); + if (ret) + return ret; + + id = usb_match_id(intf, driver->id_table); + if (!id) + return -ENODEV; + + info = (struct driver_info *)id->driver_info; + if (info != dev->driver_info) { + dev_dbg(&intf->dev, "driver_info updated to '%s'\n", + info->description); + dev->driver_info = info; + } + return 0; +} + static int cdc_mbim_bind(struct usbnet *dev, struct usb_interface *intf) { struct cdc_ncm_ctx *ctx; struct usb_driver *subdriver = ERR_PTR(-ENODEV); int ret = -ENODEV; - u8 data_altsetting = cdc_ncm_select_altsetting(dev, intf); + u8 data_altsetting = 1; struct cdc_mbim_state *info = (void *)&dev->data; - /* Probably NCM, defer for cdc_ncm_bind */ + /* should we change control altsetting on a NCM/MBIM function? */ + if (cdc_ncm_select_altsetting(intf) == CDC_NCM_COMM_ALTSETTING_MBIM) { + data_altsetting = CDC_NCM_DATA_ALTSETTING_MBIM; + ret = cdc_mbim_set_ctrlalt(dev, intf, CDC_NCM_COMM_ALTSETTING_MBIM); + if (ret) + goto err; + ret = -ENODEV; + } + + /* we will hit this for NCM/MBIM functions if prefer_mbim is false */ if (!cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting)) goto err; diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 9a2bd11943eb..d23bca57a23f 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -541,10 +541,10 @@ void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf) } EXPORT_SYMBOL_GPL(cdc_ncm_unbind); -/* Select the MBIM altsetting iff it is preferred and available, - * returning the number of the corresponding data interface altsetting +/* Return the number of the MBIM control interface altsetting iff it + * is preferred and available, */ -u8 cdc_ncm_select_altsetting(struct usbnet *dev, struct usb_interface *intf) +u8 cdc_ncm_select_altsetting(struct usb_interface *intf) { struct usb_host_interface *alt; @@ -563,15 +563,15 @@ u8 cdc_ncm_select_altsetting(struct usbnet *dev, struct usb_interface *intf) * the rules given in section 6 (USB Device Model) of this * specification." */ - if (prefer_mbim && intf->num_altsetting == 2) { + if (intf->num_altsetting < 2) + return intf->cur_altsetting->desc.bAlternateSetting; + + if (prefer_mbim) { alt = usb_altnum_to_altsetting(intf, CDC_NCM_COMM_ALTSETTING_MBIM); - if (alt && cdc_ncm_comm_intf_is_mbim(alt) && - !usb_set_interface(dev->udev, - intf->cur_altsetting->desc.bInterfaceNumber, - CDC_NCM_COMM_ALTSETTING_MBIM)) - return CDC_NCM_DATA_ALTSETTING_MBIM; + if (alt && cdc_ncm_comm_intf_is_mbim(alt)) + return CDC_NCM_COMM_ALTSETTING_MBIM; } - return CDC_NCM_DATA_ALTSETTING_NCM; + return CDC_NCM_COMM_ALTSETTING_NCM; } EXPORT_SYMBOL_GPL(cdc_ncm_select_altsetting); @@ -580,12 +580,11 @@ static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf) int ret; /* MBIM backwards compatible function? */ - cdc_ncm_select_altsetting(dev, intf); - if (cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting)) + if (cdc_ncm_select_altsetting(intf) != CDC_NCM_COMM_ALTSETTING_NCM) return -ENODEV; - /* NCM data altsetting is always 1 */ - ret = cdc_ncm_bind_common(dev, intf, 1); + /* The NCM data altsetting is fixed */ + ret = cdc_ncm_bind_common(dev, intf, CDC_NCM_DATA_ALTSETTING_NCM); /* * We should get an event when network connection is "connected" or diff --git a/include/linux/usb/cdc_ncm.h b/include/linux/usb/cdc_ncm.h index 44b38b92236a..55b6feead93b 100644 --- a/include/linux/usb/cdc_ncm.h +++ b/include/linux/usb/cdc_ncm.h @@ -121,7 +121,7 @@ struct cdc_ncm_ctx { u16 connected; }; -u8 cdc_ncm_select_altsetting(struct usbnet *dev, struct usb_interface *intf); +u8 cdc_ncm_select_altsetting(struct usb_interface *intf); int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting); void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf); struct sk_buff *cdc_ncm_fill_tx_frame(struct usbnet *dev, struct sk_buff *skb, __le32 sign);