UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

cirrusfb: do not change MCLK for Alpine chips 

A memory clock value (MCLK) is changed to a minimum required by a current
mode bandwidth.  This usually lowers the MCLK to its minimum (50 MHz) thus
decreasing the card performance.  Just leave the MCLK value set by card
BIOS.

The CL-GD5446 Technical Reference Manual point 9.9.1.3 states that if a
pixclock value is close (~1%) to the MCLK or MCLK/2 this may result in a
jitter on the screen.  A countermeasure is to use the MCLK as pixclock
source instead of a VCLK.  The patch implements this as well.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Krzysztof Helt 2008-10-15 22:03:42 -07:00 committed by Linus Torvalds
parent 3b921832d4
commit 486ff387c0
1 changed files with 53 additions and 66 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

119
drivers/video/cirrusfb.c
View File

@ -327,9 +327,7 @@ static const struct {
#endif /* CONFIG_ZORRO */
struct cirrusfb_regs {
long multiplexing;
long mclk;
long divMCLK;
int multiplexing;
};
#ifdef CIRRUSFB_DEBUG
@ -461,45 +459,28 @@ static int cirrusfb_release(struct fb_info *info, int user)
/****************************************************************************/
/**** BEGIN Hardware specific Routines **************************************/
/* Get a good MCLK value */
static long cirrusfb_get_mclk(long freq, int bpp, long *div)
/* Check if the MCLK is not a better clock source */
static int cirrusfb_check_mclk(struct cirrusfb_info *cinfo, long freq)
{
long mclk;
long mclk = vga_rseq(cinfo->regbase, CL_SEQR1F) & 0x3f;
assert(div != NULL);
/* Calculate MCLK, in case VCLK is high enough to require > 50MHz.
* Assume a 64-bit data path for now. The formula is:
* ((B * PCLK * 2)/W) * 1.2
* B = bytes per pixel, PCLK = pixclock, W = data width in bytes */
mclk = ((bpp / 8) * freq * 2) / 4;
mclk = (mclk * 12) / 10;
if (mclk < 50000)
mclk = 50000;
DPRINTK("Use MCLK of %ld kHz\n", mclk);
/* Calculate value for SR1F. Multiply by 2 so we can round up. */
mclk = ((mclk * 16) / 14318);
mclk = (mclk + 1) / 2;
DPRINTK("Set SR1F[5:0] to 0x%lx\n", mclk);
/* Read MCLK value */
mclk = (14318 * mclk) >> 3;
DPRINTK("Read MCLK of %ld kHz\n", mclk);
/* Determine if we should use MCLK instead of VCLK, and if so, what we
* should divide it by to get VCLK */
switch (freq) {
case 24751 ... 25249:
*div = 2;
DPRINTK("Using VCLK = MCLK/2\n");
break;
case 49501 ... 50499:
*div = 1;
* should divide it by to get VCLK
*/
if (abs(freq - mclk) < 250) {
DPRINTK("Using VCLK = MCLK\n");
break;
default:
*div = 0;
break;
return 1;
} else if (abs(freq - (mclk / 2)) < 250) {
DPRINTK("Using VCLK = MCLK/2\n");
return 2;
}
return mclk;
return 0;
}
static int cirrusfb_check_var(struct fb_var_screeninfo *var,
@ -705,30 +686,27 @@ static int cirrusfb_decode_var(const struct fb_var_screeninfo *var,
break;
}
#endif
regs->mclk = cirrusfb_get_mclk(freq, var->bits_per_pixel,
&regs->divMCLK);
return 0;
}
static void cirrusfb_set_mclk(const struct cirrusfb_info *cinfo, int val,
int div)
static void cirrusfb_set_mclk_as_source(const struct cirrusfb_info *cinfo,
int div)
{
unsigned char old1f, old1e;
assert(cinfo != NULL);
old1f = vga_rseq(cinfo->regbase, CL_SEQR1F) & ~0x40;
if (div == 2) {
/* VCLK = MCLK/2 */
unsigned char old = vga_rseq(cinfo->regbase, CL_SEQR1E);
vga_wseq(cinfo->regbase, CL_SEQR1E, old | 0x1);
vga_wseq(cinfo->regbase, CL_SEQR1F, 0x40 | (val & 0x3f));
} else if (div == 1) {
/* VCLK = MCLK */
unsigned char old = vga_rseq(cinfo->regbase, CL_SEQR1E);
vga_wseq(cinfo->regbase, CL_SEQR1E, old & ~0x1);
vga_wseq(cinfo->regbase, CL_SEQR1F, 0x40 | (val & 0x3f));
} else {
vga_wseq(cinfo->regbase, CL_SEQR1F, val & 0x3f);
if (div) {
DPRINTK("Set %s as pixclock source.\n",
(div == 2) ? "MCLK/2" : "MCLK");
old1f |= 0x40;
old1e = vga_rseq(cinfo->regbase, CL_SEQR1E) & ~0x1;
if (div == 2)
old1e |= 1;
vga_wseq(cinfo->regbase, CL_SEQR1E, old1e);
}
vga_wseq(cinfo->regbase, CL_SEQR1F, old1f);
}
/*************************************************************************
@ -904,19 +882,31 @@ static int cirrusfb_set_par_foo(struct fb_info *info)
/* formula: VClk = (OSC * N) / (D * (1+P)) */
/* Example: VClk = (14.31818 * 91) / (23 * (1+1)) = 28.325 MHz */
vga_wseq(regbase, CL_SEQRB, nom);
tmp = den << 1;
if (div != 0)
tmp |= 1;
if (cinfo->btype == BT_ALPINE) {
/* if freq is close to mclk or mclk/2 select mclk
* as clock source
*/
int divMCLK = cirrusfb_check_mclk(cinfo, freq);
if (divMCLK) {
nom = 0;
cirrusfb_set_mclk_as_source(cinfo, divMCLK);
}
}
if (nom) {
vga_wseq(regbase, CL_SEQRB, nom);
tmp = den << 1;
if (div != 0)
tmp |= 1;
/* 6 bit denom; ONLY 5434!!! (bugged me 10 days) */
if ((cinfo->btype == BT_SD64) ||
(cinfo->btype == BT_ALPINE) ||
(cinfo->btype == BT_GD5480))
tmp |= 0x80;
/* 6 bit denom; ONLY 5434!!! (bugged me 10 days) */
if ((cinfo->btype == BT_SD64) ||
(cinfo->btype == BT_ALPINE) ||
(cinfo->btype == BT_GD5480))
tmp |= 0x80;
DPRINTK("CL_SEQR1B: %ld\n", (long) tmp);
vga_wseq(regbase, CL_SEQR1B, tmp);
DPRINTK("CL_SEQR1B: %ld\n", (long) tmp);
vga_wseq(regbase, CL_SEQR1B, tmp);
}
if (yres >= 1024)
/* 1280x1024 */
@ -1106,7 +1096,6 @@ static int cirrusfb_set_par_foo(struct fb_info *info)
case BT_ALPINE:
DPRINTK(" (for GD543x)\n");
cirrusfb_set_mclk(cinfo, regs.mclk, regs.divMCLK);
/* We already set SRF and SR1F */
break;
@ -1179,7 +1168,6 @@ static int cirrusfb_set_par_foo(struct fb_info *info)
case BT_ALPINE:
DPRINTK(" (for GD543x)\n");
vga_wseq(regbase, CL_SEQR7, 0xa7);
cirrusfb_set_mclk(cinfo, regs.mclk, regs.divMCLK);
break;
case BT_GD5480:
@ -1257,7 +1245,6 @@ static int cirrusfb_set_par_foo(struct fb_info *info)
case BT_ALPINE:
DPRINTK(" (for GD543x)\n");
vga_wseq(regbase, CL_SEQR7, 0xa9);
cirrusfb_set_mclk(cinfo, regs.mclk, regs.divMCLK);
break;
case BT_GD5480: