PCI: centralize device setup code
Move the device setup stuff into pci_setup_device() which will be used to setup the Virtual Function later. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This commit is contained in:
parent
a28724b0fb
commit
480b93b783
|
@ -178,6 +178,7 @@ enum pci_bar_type {
|
|||
pci_bar_mem64, /* A 64-bit memory BAR */
|
||||
};
|
||||
|
||||
extern int pci_setup_device(struct pci_dev *dev);
|
||||
extern int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
|
||||
struct resource *res, unsigned int reg);
|
||||
extern int pci_resource_bar(struct pci_dev *dev, int resno,
|
||||
|
|
|
@ -674,6 +674,19 @@ static void pci_read_irq(struct pci_dev *dev)
|
|||
dev->irq = irq;
|
||||
}
|
||||
|
||||
static void set_pcie_port_type(struct pci_dev *pdev)
|
||||
{
|
||||
int pos;
|
||||
u16 reg16;
|
||||
|
||||
pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
|
||||
if (!pos)
|
||||
return;
|
||||
pdev->is_pcie = 1;
|
||||
pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, ®16);
|
||||
pdev->pcie_type = (reg16 & PCI_EXP_FLAGS_TYPE) >> 4;
|
||||
}
|
||||
|
||||
#define LEGACY_IO_RESOURCE (IORESOURCE_IO | IORESOURCE_PCI_FIXED)
|
||||
|
||||
/**
|
||||
|
@ -683,12 +696,34 @@ static void pci_read_irq(struct pci_dev *dev)
|
|||
* Initialize the device structure with information about the device's
|
||||
* vendor,class,memory and IO-space addresses,IRQ lines etc.
|
||||
* Called at initialisation of the PCI subsystem and by CardBus services.
|
||||
* Returns 0 on success and -1 if unknown type of device (not normal, bridge
|
||||
* or CardBus).
|
||||
* Returns 0 on success and negative if unknown type of device (not normal,
|
||||
* bridge or CardBus).
|
||||
*/
|
||||
static int pci_setup_device(struct pci_dev * dev)
|
||||
int pci_setup_device(struct pci_dev *dev)
|
||||
{
|
||||
u32 class;
|
||||
u8 hdr_type;
|
||||
struct pci_slot *slot;
|
||||
|
||||
if (pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type))
|
||||
return -EIO;
|
||||
|
||||
dev->sysdata = dev->bus->sysdata;
|
||||
dev->dev.parent = dev->bus->bridge;
|
||||
dev->dev.bus = &pci_bus_type;
|
||||
dev->hdr_type = hdr_type & 0x7f;
|
||||
dev->multifunction = !!(hdr_type & 0x80);
|
||||
dev->cfg_size = pci_cfg_space_size(dev);
|
||||
dev->error_state = pci_channel_io_normal;
|
||||
set_pcie_port_type(dev);
|
||||
|
||||
list_for_each_entry(slot, &dev->bus->slots, list)
|
||||
if (PCI_SLOT(dev->devfn) == slot->number)
|
||||
dev->slot = slot;
|
||||
|
||||
/* Assume 32-bit PCI; let 64-bit PCI cards (which are far rarer)
|
||||
set this higher, assuming the system even supports it. */
|
||||
dev->dma_mask = 0xffffffff;
|
||||
|
||||
dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus),
|
||||
dev->bus->number, PCI_SLOT(dev->devfn),
|
||||
|
@ -708,7 +743,6 @@ static int pci_setup_device(struct pci_dev * dev)
|
|||
|
||||
/* Early fixups, before probing the BARs */
|
||||
pci_fixup_device(pci_fixup_early, dev);
|
||||
class = dev->class >> 8;
|
||||
|
||||
switch (dev->hdr_type) { /* header type */
|
||||
case PCI_HEADER_TYPE_NORMAL: /* standard header */
|
||||
|
@ -770,7 +804,7 @@ static int pci_setup_device(struct pci_dev * dev)
|
|||
default: /* unknown header */
|
||||
dev_err(&dev->dev, "unknown header type %02x, "
|
||||
"ignoring device\n", dev->hdr_type);
|
||||
return -1;
|
||||
return -EIO;
|
||||
|
||||
bad:
|
||||
dev_err(&dev->dev, "ignoring class %02x (doesn't match header "
|
||||
|
@ -804,19 +838,6 @@ static void pci_release_dev(struct device *dev)
|
|||
kfree(pci_dev);
|
||||
}
|
||||
|
||||
static void set_pcie_port_type(struct pci_dev *pdev)
|
||||
{
|
||||
int pos;
|
||||
u16 reg16;
|
||||
|
||||
pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
|
||||
if (!pos)
|
||||
return;
|
||||
pdev->is_pcie = 1;
|
||||
pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, ®16);
|
||||
pdev->pcie_type = (reg16 & PCI_EXP_FLAGS_TYPE) >> 4;
|
||||
}
|
||||
|
||||
/**
|
||||
* pci_cfg_space_size - get the configuration space size of the PCI device.
|
||||
* @dev: PCI device
|
||||
|
@ -897,9 +918,7 @@ EXPORT_SYMBOL(alloc_pci_dev);
|
|||
static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
|
||||
{
|
||||
struct pci_dev *dev;
|
||||
struct pci_slot *slot;
|
||||
u32 l;
|
||||
u8 hdr_type;
|
||||
int delay = 1;
|
||||
|
||||
if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &l))
|
||||
|
@ -926,33 +945,16 @@ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
|
|||
}
|
||||
}
|
||||
|
||||
if (pci_bus_read_config_byte(bus, devfn, PCI_HEADER_TYPE, &hdr_type))
|
||||
return NULL;
|
||||
|
||||
dev = alloc_pci_dev();
|
||||
if (!dev)
|
||||
return NULL;
|
||||
|
||||
dev->bus = bus;
|
||||
dev->sysdata = bus->sysdata;
|
||||
dev->dev.parent = bus->bridge;
|
||||
dev->dev.bus = &pci_bus_type;
|
||||
dev->devfn = devfn;
|
||||
dev->hdr_type = hdr_type & 0x7f;
|
||||
dev->multifunction = !!(hdr_type & 0x80);
|
||||
dev->vendor = l & 0xffff;
|
||||
dev->device = (l >> 16) & 0xffff;
|
||||
dev->error_state = pci_channel_io_normal;
|
||||
set_pcie_port_type(dev);
|
||||
|
||||
list_for_each_entry(slot, &bus->slots, list)
|
||||
if (PCI_SLOT(devfn) == slot->number)
|
||||
dev->slot = slot;
|
||||
|
||||
/* Assume 32-bit PCI; let 64-bit PCI cards (which are far rarer)
|
||||
set this higher, assuming the system even supports it. */
|
||||
dev->dma_mask = 0xffffffff;
|
||||
if (pci_setup_device(dev) < 0) {
|
||||
if (pci_setup_device(dev)) {
|
||||
kfree(dev);
|
||||
return NULL;
|
||||
}
|
||||
|
|
Loading…
Reference in New Issue