UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

serial: remove sirf prima/atlas driver 

The CSR SiRF prima2/atlas platforms are getting removed, so this driver
is no longer needed.

Cc: Barry Song <baohua@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210120161324.3728294-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Arnd Bergmann 2021-01-20 17:12:26 +01:00 committed by Greg Kroah-Hartman
parent 532b7cecdd
commit 4776a4a0a2
5 changed files with 0 additions and 2007 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

34
Documentation/devicetree/bindings/serial/sirf-uart.txt
View File

@ -1,34 +0,0 @@
* CSR SiRFprimaII/atlasVI Universal Synchronous Asynchronous Receiver/Transmitter *
Required properties:
- compatible : Should be "sirf,prima2-uart", "sirf, prima2-usp-uart",
"sirf,atlas7-uart" or "sirf,atlas7-usp-uart".
- reg : Offset and length of the register set for the device
- interrupts : Should contain uart interrupt
- fifosize : Should define hardware rx/tx fifo size
- clocks : Should contain uart clock number
Optional properties:
- uart-has-rtscts: we have hardware flow controller pins in hardware
- rts-gpios: RTS pin for USP-based UART if uart-has-rtscts is true
- cts-gpios: CTS pin for USP-based UART if uart-has-rtscts is true
Example:
uart0: uart@b0050000 {
cell-index = <0>;
compatible = "sirf,prima2-uart";
reg = <0xb0050000 0x1000>;
interrupts = <17>;
fifosize = <128>;
clocks = <&clks 13>;
};
On the board-specific dts, we can put rts-gpios and cts-gpios like
usp@b0090000 {
compatible = "sirf,prima2-usp-uart";
uart-has-rtscts;
rts-gpios = <&gpio 15 0>;
cts-gpios = <&gpio 46 0>;
};

22
drivers/tty/serial/Kconfig
View File

@ -276,28 +276,6 @@ config SERIAL_SAMSUNG_CONSOLE
your boot loader about how to pass options to the kernel at
boot time.)
config SERIAL_SIRFSOC
tristate "SiRF SoC Platform Serial port support"
depends on ARCH_SIRF
select SERIAL_CORE
help
Support for the on-chip UART on the CSR SiRFprimaII series,
providing /dev/ttySiRF0, 1 and 2 (note, some machines may not
provide all of these ports, depending on how the serial port
pins are configured).
config SERIAL_SIRFSOC_CONSOLE
bool "Support for console on SiRF SoC serial port"
depends on SERIAL_SIRFSOC=y
select SERIAL_CORE_CONSOLE
help
Even if you say Y here, the currently visible virtual console
(/dev/tty0) will still be used as the system console by default, but
you can alter that using a kernel command line option such as
"console=ttySiRFx". (Try "man bootparam" or see the documentation of
your boot loader about how to pass options to the kernel at
boot time.)
config SERIAL_TEGRA
tristate "NVIDIA Tegra20/30 SoC serial controller"
depends on ARCH_TEGRA && TEGRA20_APB_DMA

1
drivers/tty/serial/Makefile
View File

@ -69,7 +69,6 @@ obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o
obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o
obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o
obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o
obj-$(CONFIG_SERIAL_SIRFSOC) += sirfsoc_uart.o
obj-$(CONFIG_SERIAL_TEGRA) += serial-tegra.o
obj-$(CONFIG_SERIAL_TEGRA_TCU) += tegra-tcu.o
obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o

1503
drivers/tty/serial/sirfsoc_uart.c
View File

File diff suppressed because it is too large Load Diff

447
drivers/tty/serial/sirfsoc_uart.h
View File

@ -1,447 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Drivers for CSR SiRFprimaII onboard UARTs.
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*/
#include <linux/bitops.h>
#include <linux/log2.h>
#include <linux/hrtimer.h>
struct sirfsoc_uart_param {
const char *uart_name;
const char *port_name;
};
struct sirfsoc_register {
/* hardware uart specific */
u32 sirfsoc_line_ctrl;
u32 sirfsoc_divisor;
/* uart - usp common */
u32 sirfsoc_tx_rx_en;
u32 sirfsoc_int_en_reg;
u32 sirfsoc_int_st_reg;
u32 sirfsoc_int_en_clr_reg;
u32 sirfsoc_tx_dma_io_ctrl;
u32 sirfsoc_tx_dma_io_len;
u32 sirfsoc_tx_fifo_ctrl;
u32 sirfsoc_tx_fifo_level_chk;
u32 sirfsoc_tx_fifo_op;
u32 sirfsoc_tx_fifo_status;
u32 sirfsoc_tx_fifo_data;
u32 sirfsoc_rx_dma_io_ctrl;
u32 sirfsoc_rx_dma_io_len;
u32 sirfsoc_rx_fifo_ctrl;
u32 sirfsoc_rx_fifo_level_chk;
u32 sirfsoc_rx_fifo_op;
u32 sirfsoc_rx_fifo_status;
u32 sirfsoc_rx_fifo_data;
u32 sirfsoc_afc_ctrl;
u32 sirfsoc_swh_dma_io;
/* hardware usp specific */
u32 sirfsoc_mode1;
u32 sirfsoc_mode2;
u32 sirfsoc_tx_frame_ctrl;
u32 sirfsoc_rx_frame_ctrl;
u32 sirfsoc_async_param_reg;
};
typedef u32 (*fifo_full_mask)(struct uart_port *port);
typedef u32 (*fifo_empty_mask)(struct uart_port *port);
struct sirfsoc_fifo_status {
fifo_full_mask ff_full;
fifo_empty_mask ff_empty;
};
struct sirfsoc_int_en {
u32 sirfsoc_rx_done_en;
u32 sirfsoc_tx_done_en;
u32 sirfsoc_rx_oflow_en;
u32 sirfsoc_tx_allout_en;
u32 sirfsoc_rx_io_dma_en;
u32 sirfsoc_tx_io_dma_en;
u32 sirfsoc_rxfifo_full_en;
u32 sirfsoc_txfifo_empty_en;
u32 sirfsoc_rxfifo_thd_en;
u32 sirfsoc_txfifo_thd_en;
u32 sirfsoc_frm_err_en;
u32 sirfsoc_rxd_brk_en;
u32 sirfsoc_rx_timeout_en;
u32 sirfsoc_parity_err_en;
u32 sirfsoc_cts_en;
u32 sirfsoc_rts_en;
};
struct sirfsoc_int_status {
u32 sirfsoc_rx_done;
u32 sirfsoc_tx_done;
u32 sirfsoc_rx_oflow;
u32 sirfsoc_tx_allout;
u32 sirfsoc_rx_io_dma;
u32 sirfsoc_tx_io_dma;
u32 sirfsoc_rxfifo_full;
u32 sirfsoc_txfifo_empty;
u32 sirfsoc_rxfifo_thd;
u32 sirfsoc_txfifo_thd;
u32 sirfsoc_frm_err;
u32 sirfsoc_rxd_brk;
u32 sirfsoc_rx_timeout;
u32 sirfsoc_parity_err;
u32 sirfsoc_cts;
u32 sirfsoc_rts;
};
enum sirfsoc_uart_type {
SIRF_REAL_UART,
SIRF_USP_UART,
};
struct sirfsoc_uart_register {
struct sirfsoc_register uart_reg;
struct sirfsoc_int_en uart_int_en;
struct sirfsoc_int_status uart_int_st;
struct sirfsoc_fifo_status fifo_status;
struct sirfsoc_uart_param uart_param;
enum sirfsoc_uart_type uart_type;
};
static u32 uart_usp_ff_full_mask(struct uart_port *port)
{
u32 full_bit;
full_bit = ilog2(port->fifosize);
return (1 << full_bit);
}
static u32 uart_usp_ff_empty_mask(struct uart_port *port)
{
u32 empty_bit;
empty_bit = ilog2(port->fifosize) + 1;
return (1 << empty_bit);
}
static struct sirfsoc_uart_register sirfsoc_usp = {
.uart_reg = {
.sirfsoc_mode1 = 0x0000,
.sirfsoc_mode2 = 0x0004,
.sirfsoc_tx_frame_ctrl = 0x0008,
.sirfsoc_rx_frame_ctrl = 0x000c,
.sirfsoc_tx_rx_en = 0x0010,
.sirfsoc_int_en_reg = 0x0014,
.sirfsoc_int_st_reg = 0x0018,
.sirfsoc_async_param_reg = 0x0024,
.sirfsoc_tx_dma_io_ctrl = 0x0100,
.sirfsoc_tx_dma_io_len = 0x0104,
.sirfsoc_tx_fifo_ctrl = 0x0108,
.sirfsoc_tx_fifo_level_chk = 0x010c,
.sirfsoc_tx_fifo_op = 0x0110,
.sirfsoc_tx_fifo_status = 0x0114,
.sirfsoc_tx_fifo_data = 0x0118,
.sirfsoc_rx_dma_io_ctrl = 0x0120,
.sirfsoc_rx_dma_io_len = 0x0124,
.sirfsoc_rx_fifo_ctrl = 0x0128,
.sirfsoc_rx_fifo_level_chk = 0x012c,
.sirfsoc_rx_fifo_op = 0x0130,
.sirfsoc_rx_fifo_status = 0x0134,
.sirfsoc_rx_fifo_data = 0x0138,
.sirfsoc_int_en_clr_reg = 0x140,
},
.uart_int_en = {
.sirfsoc_rx_done_en = BIT(0),
.sirfsoc_tx_done_en = BIT(1),
.sirfsoc_rx_oflow_en = BIT(2),
.sirfsoc_tx_allout_en = BIT(3),
.sirfsoc_rx_io_dma_en = BIT(4),
.sirfsoc_tx_io_dma_en = BIT(5),
.sirfsoc_rxfifo_full_en = BIT(6),
.sirfsoc_txfifo_empty_en = BIT(7),
.sirfsoc_rxfifo_thd_en = BIT(8),
.sirfsoc_txfifo_thd_en = BIT(9),
.sirfsoc_frm_err_en = BIT(10),
.sirfsoc_rx_timeout_en = BIT(11),
.sirfsoc_rxd_brk_en = BIT(15),
},
.uart_int_st = {
.sirfsoc_rx_done = BIT(0),
.sirfsoc_tx_done = BIT(1),
.sirfsoc_rx_oflow = BIT(2),
.sirfsoc_tx_allout = BIT(3),
.sirfsoc_rx_io_dma = BIT(4),
.sirfsoc_tx_io_dma = BIT(5),
.sirfsoc_rxfifo_full = BIT(6),
.sirfsoc_txfifo_empty = BIT(7),
.sirfsoc_rxfifo_thd = BIT(8),
.sirfsoc_txfifo_thd = BIT(9),
.sirfsoc_frm_err = BIT(10),
.sirfsoc_rx_timeout = BIT(11),
.sirfsoc_rxd_brk = BIT(15),
},
.fifo_status = {
.ff_full = uart_usp_ff_full_mask,
.ff_empty = uart_usp_ff_empty_mask,
},
.uart_param = {
.uart_name = "ttySiRF",
.port_name = "sirfsoc-uart",
},
};
static struct sirfsoc_uart_register sirfsoc_uart = {
.uart_reg = {
.sirfsoc_line_ctrl = 0x0040,
.sirfsoc_tx_rx_en = 0x004c,
.sirfsoc_divisor = 0x0050,
.sirfsoc_int_en_reg = 0x0054,
.sirfsoc_int_st_reg = 0x0058,
.sirfsoc_int_en_clr_reg = 0x0060,
.sirfsoc_tx_dma_io_ctrl = 0x0100,
.sirfsoc_tx_dma_io_len = 0x0104,
.sirfsoc_tx_fifo_ctrl = 0x0108,
.sirfsoc_tx_fifo_level_chk = 0x010c,
.sirfsoc_tx_fifo_op = 0x0110,
.sirfsoc_tx_fifo_status = 0x0114,
.sirfsoc_tx_fifo_data = 0x0118,
.sirfsoc_rx_dma_io_ctrl = 0x0120,
.sirfsoc_rx_dma_io_len = 0x0124,
.sirfsoc_rx_fifo_ctrl = 0x0128,
.sirfsoc_rx_fifo_level_chk = 0x012c,
.sirfsoc_rx_fifo_op = 0x0130,
.sirfsoc_rx_fifo_status = 0x0134,
.sirfsoc_rx_fifo_data = 0x0138,
.sirfsoc_afc_ctrl = 0x0140,
.sirfsoc_swh_dma_io = 0x0148,
},
.uart_int_en = {
.sirfsoc_rx_done_en = BIT(0),
.sirfsoc_tx_done_en = BIT(1),
.sirfsoc_rx_oflow_en = BIT(2),
.sirfsoc_tx_allout_en = BIT(3),
.sirfsoc_rx_io_dma_en = BIT(4),
.sirfsoc_tx_io_dma_en = BIT(5),
.sirfsoc_rxfifo_full_en = BIT(6),
.sirfsoc_txfifo_empty_en = BIT(7),
.sirfsoc_rxfifo_thd_en = BIT(8),
.sirfsoc_txfifo_thd_en = BIT(9),
.sirfsoc_frm_err_en = BIT(10),
.sirfsoc_rxd_brk_en = BIT(11),
.sirfsoc_rx_timeout_en = BIT(12),
.sirfsoc_parity_err_en = BIT(13),
.sirfsoc_cts_en = BIT(14),
.sirfsoc_rts_en = BIT(15),
},
.uart_int_st = {
.sirfsoc_rx_done = BIT(0),
.sirfsoc_tx_done = BIT(1),
.sirfsoc_rx_oflow = BIT(2),
.sirfsoc_tx_allout = BIT(3),
.sirfsoc_rx_io_dma = BIT(4),
.sirfsoc_tx_io_dma = BIT(5),
.sirfsoc_rxfifo_full = BIT(6),
.sirfsoc_txfifo_empty = BIT(7),
.sirfsoc_rxfifo_thd = BIT(8),
.sirfsoc_txfifo_thd = BIT(9),
.sirfsoc_frm_err = BIT(10),
.sirfsoc_rxd_brk = BIT(11),
.sirfsoc_rx_timeout = BIT(12),
.sirfsoc_parity_err = BIT(13),
.sirfsoc_cts = BIT(14),
.sirfsoc_rts = BIT(15),
},
.fifo_status = {
.ff_full = uart_usp_ff_full_mask,
.ff_empty = uart_usp_ff_empty_mask,
},
.uart_param = {
.uart_name = "ttySiRF",
.port_name = "sirfsoc_uart",
},
};
/* uart io ctrl */
#define SIRFUART_DATA_BIT_LEN_MASK 0x3
#define SIRFUART_DATA_BIT_LEN_5 BIT(0)
#define SIRFUART_DATA_BIT_LEN_6 1
#define SIRFUART_DATA_BIT_LEN_7 2
#define SIRFUART_DATA_BIT_LEN_8 3
#define SIRFUART_STOP_BIT_LEN_1 0
#define SIRFUART_STOP_BIT_LEN_2 BIT(2)
#define SIRFUART_PARITY_EN BIT(3)
#define SIRFUART_EVEN_BIT BIT(4)
#define SIRFUART_STICK_BIT_MASK (7 << 3)
#define SIRFUART_STICK_BIT_NONE (0 << 3)
#define SIRFUART_STICK_BIT_EVEN BIT(3)
#define SIRFUART_STICK_BIT_ODD (3 << 3)
#define SIRFUART_STICK_BIT_MARK (5 << 3)
#define SIRFUART_STICK_BIT_SPACE (7 << 3)
#define SIRFUART_SET_BREAK BIT(6)
#define SIRFUART_LOOP_BACK BIT(7)
#define SIRFUART_PARITY_MASK (7 << 3)
#define SIRFUART_DUMMY_READ BIT(16)
#define SIRFUART_AFC_CTRL_RX_THD 0x70
#define SIRFUART_AFC_RX_EN BIT(8)
#define SIRFUART_AFC_TX_EN BIT(9)
#define SIRFUART_AFC_CTS_CTRL BIT(10)
#define SIRFUART_AFC_RTS_CTRL BIT(11)
#define SIRFUART_AFC_CTS_STATUS BIT(12)
#define SIRFUART_AFC_RTS_STATUS BIT(13)
/* UART FIFO Register */
#define SIRFUART_FIFO_STOP 0x0
#define SIRFUART_FIFO_RESET BIT(0)
#define SIRFUART_FIFO_START BIT(1)
#define SIRFUART_RX_EN BIT(0)
#define SIRFUART_TX_EN BIT(1)
#define SIRFUART_IO_MODE BIT(0)
#define SIRFUART_DMA_MODE 0x0
#define SIRFUART_RX_DMA_FLUSH 0x4
#define SIRFUART_CLEAR_RX_ADDR_EN 0x2
/* Baud Rate Calculation */
#define SIRF_USP_MIN_SAMPLE_DIV 0x1
#define SIRF_MIN_SAMPLE_DIV 0xf
#define SIRF_MAX_SAMPLE_DIV 0x3f
#define SIRF_IOCLK_DIV_MAX 0xffff
#define SIRF_SAMPLE_DIV_SHIFT 16
#define SIRF_IOCLK_DIV_MASK 0xffff
#define SIRF_SAMPLE_DIV_MASK 0x3f0000
#define SIRF_BAUD_RATE_SUPPORT_NR 18
/* USP SPEC */
#define SIRFSOC_USP_ENDIAN_CTRL_LSBF BIT(4)
#define SIRFSOC_USP_EN BIT(5)
#define SIRFSOC_USP_MODE2_RXD_DELAY_OFFSET 0
#define SIRFSOC_USP_MODE2_TXD_DELAY_OFFSET 8
#define SIRFSOC_USP_MODE2_CLK_DIVISOR_MASK 0x3ff
#define SIRFSOC_USP_MODE2_CLK_DIVISOR_OFFSET 21
#define SIRFSOC_USP_TX_DATA_LEN_OFFSET 0
#define SIRFSOC_USP_TX_SYNC_LEN_OFFSET 8
#define SIRFSOC_USP_TX_FRAME_LEN_OFFSET 16
#define SIRFSOC_USP_TX_SHIFTER_LEN_OFFSET 24
#define SIRFSOC_USP_TX_CLK_DIVISOR_OFFSET 30
#define SIRFSOC_USP_RX_DATA_LEN_OFFSET 0
#define SIRFSOC_USP_RX_FRAME_LEN_OFFSET 8
#define SIRFSOC_USP_RX_SHIFTER_LEN_OFFSET 16
#define SIRFSOC_USP_RX_CLK_DIVISOR_OFFSET 24
#define SIRFSOC_USP_ASYNC_DIV2_MASK 0x3f
#define SIRFSOC_USP_ASYNC_DIV2_OFFSET 16
#define SIRFSOC_USP_LOOP_BACK_CTRL BIT(2)
#define SIRFSOC_USP_FRADDR_CLR_EN BIT(1)
/* USP-UART Common */
#define SIRFSOC_UART_RX_TIMEOUT(br, to) (((br) * (((to) + 999) / 1000)) / 1000)
#define SIRFUART_RECV_TIMEOUT_VALUE(x) \
(((x) > 0xFFFF) ? 0xFFFF : ((x) & 0xFFFF))
#define SIRFUART_USP_RECV_TIMEOUT(x) (x & 0xFFFF)
#define SIRFUART_UART_RECV_TIMEOUT(x) ((x & 0xFFFF) << 16)
#define SIRFUART_FIFO_THD(port) (port->fifosize >> 1)
#define SIRFUART_ERR_INT_STAT(unit_st, uart_type) \
(uint_st->sirfsoc_rx_oflow | \
uint_st->sirfsoc_frm_err | \
uint_st->sirfsoc_rxd_brk | \
((uart_type != SIRF_REAL_UART) ? \
0 : uint_st->sirfsoc_parity_err))
#define SIRFUART_RX_IO_INT_EN(uint_en, uart_type) \
(uint_en->sirfsoc_rx_done_en |\
uint_en->sirfsoc_rxfifo_thd_en |\
uint_en->sirfsoc_rxfifo_full_en |\
uint_en->sirfsoc_frm_err_en |\
uint_en->sirfsoc_rx_oflow_en |\
uint_en->sirfsoc_rxd_brk_en |\
((uart_type != SIRF_REAL_UART) ? \
0 : uint_en->sirfsoc_parity_err_en))
#define SIRFUART_RX_IO_INT_ST(uint_st) \
(uint_st->sirfsoc_rxfifo_thd |\
uint_st->sirfsoc_rxfifo_full|\
uint_st->sirfsoc_rx_done |\
uint_st->sirfsoc_rx_timeout)
#define SIRFUART_CTS_INT_ST(uint_st) (uint_st->sirfsoc_cts)
#define SIRFUART_RX_DMA_INT_EN(uint_en, uart_type) \
(uint_en->sirfsoc_frm_err_en |\
uint_en->sirfsoc_rx_oflow_en |\
uint_en->sirfsoc_rxd_brk_en |\
((uart_type != SIRF_REAL_UART) ? \
0 : uint_en->sirfsoc_parity_err_en))
/* Generic Definitions */
#define SIRFSOC_UART_NAME "ttySiRF"
#define SIRFSOC_UART_MAJOR 0
#define SIRFSOC_UART_MINOR 0
#define SIRFUART_PORT_NAME "sirfsoc-uart"
#define SIRFUART_MAP_SIZE 0x200
#define SIRFSOC_UART_NR 11
#define SIRFSOC_PORT_TYPE 0xa5
/* Uart Common Use Macro*/
#define SIRFSOC_RX_DMA_BUF_SIZE (1024 * 32)
#define BYTES_TO_ALIGN(dma_addr) ((unsigned long)(dma_addr) & 0x3)
/* Uart Fifo Level Chk */
#define SIRFUART_TX_FIFO_SC_OFFSET 0
#define SIRFUART_TX_FIFO_LC_OFFSET 10
#define SIRFUART_TX_FIFO_HC_OFFSET 20
#define SIRFUART_TX_FIFO_CHK_SC(line, value) ((((line) == 1) ? (value & 0x3) :\
(value & 0x1f)) << SIRFUART_TX_FIFO_SC_OFFSET)
#define SIRFUART_TX_FIFO_CHK_LC(line, value) ((((line) == 1) ? (value & 0x3) :\
(value & 0x1f)) << SIRFUART_TX_FIFO_LC_OFFSET)
#define SIRFUART_TX_FIFO_CHK_HC(line, value) ((((line) == 1) ? (value & 0x3) :\
(value & 0x1f)) << SIRFUART_TX_FIFO_HC_OFFSET)
#define SIRFUART_RX_FIFO_CHK_SC SIRFUART_TX_FIFO_CHK_SC
#define SIRFUART_RX_FIFO_CHK_LC SIRFUART_TX_FIFO_CHK_LC
#define SIRFUART_RX_FIFO_CHK_HC SIRFUART_TX_FIFO_CHK_HC
#define SIRFUART_RX_FIFO_MASK 0x7f
/* Indicate how many buffers used */
/* For Fast Baud Rate Calculation */
struct sirfsoc_baudrate_to_regv {
unsigned int baud_rate;
unsigned int reg_val;
};
enum sirfsoc_tx_state {
TX_DMA_IDLE,
TX_DMA_RUNNING,
TX_DMA_PAUSE,
};
struct sirfsoc_rx_buffer {
struct circ_buf xmit;
dma_cookie_t cookie;
struct dma_async_tx_descriptor *desc;
dma_addr_t dma_addr;
};
struct sirfsoc_uart_port {
bool hw_flow_ctrl;
bool ms_enabled;
struct uart_port port;
struct clk *clk;
/* for SiRFatlas7, there are SET/CLR for UART_INT_EN */
bool is_atlas7;
struct sirfsoc_uart_register *uart_reg;
struct dma_chan *rx_dma_chan;
struct dma_chan *tx_dma_chan;
dma_addr_t tx_dma_addr;
struct dma_async_tx_descriptor *tx_dma_desc;
unsigned long transfer_size;
enum sirfsoc_tx_state tx_dma_state;
unsigned int cts_gpio;
unsigned int rts_gpio;
struct sirfsoc_rx_buffer rx_dma_items;
struct hrtimer hrt;
bool is_hrt_enabled;
unsigned long rx_period_time;
unsigned long rx_last_pos;
unsigned long pio_fetch_cnt;
};
/* Register Access Control */
#define portaddr(port, reg) ((port)->membase + (reg))
#define rd_regl(port, reg) (__raw_readl(portaddr(port, reg)))
#define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg))
/* UART Port Mask */
#define SIRFUART_FIFOLEVEL_MASK(port) ((port->fifosize - 1) & 0xFFF)
#define SIRFUART_FIFOFULL_MASK(port) (port->fifosize & 0xFFF)
#define SIRFUART_FIFOEMPTY_MASK(port) ((port->fifosize & 0xFFF) << 1)