[SCSI] ipr: Better handle adapter boot time errors
If an ipr adapter encounters an adapter error requiring an adapter reset to recover from prior to driver load time, the error will be ignored and recovery will not happen until the initial timeout occurs waiting for the firmware to come ready, which means a five minute timeout. Fix is to read the interrupt register before clearing any of the interrupts at probe time. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
This commit is contained in:
parent
a6bcbc2f5d
commit
473b1e8ed2
|
@ -7444,7 +7444,7 @@ static int __devinit ipr_probe_ioa(struct pci_dev *pdev,
|
|||
unsigned long ipr_regs_pci;
|
||||
void __iomem *ipr_regs;
|
||||
int rc = PCIBIOS_SUCCESSFUL;
|
||||
volatile u32 mask, uproc;
|
||||
volatile u32 mask, uproc, interrupts;
|
||||
|
||||
ENTER;
|
||||
|
||||
|
@ -7551,9 +7551,14 @@ static int __devinit ipr_probe_ioa(struct pci_dev *pdev,
|
|||
* the card is in an unknown state and needs a hard reset
|
||||
*/
|
||||
mask = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
|
||||
interrupts = readl(ioa_cfg->regs.sense_interrupt_reg);
|
||||
uproc = readl(ioa_cfg->regs.sense_uproc_interrupt_reg);
|
||||
if ((mask & IPR_PCII_HRRQ_UPDATED) == 0 || (uproc & IPR_UPROCI_RESET_ALERT))
|
||||
ioa_cfg->needs_hard_reset = 1;
|
||||
if (interrupts & IPR_PCII_ERROR_INTERRUPTS)
|
||||
ioa_cfg->needs_hard_reset = 1;
|
||||
if (interrupts & IPR_PCII_IOA_UNIT_CHECKED)
|
||||
ioa_cfg->ioa_unit_checked = 1;
|
||||
|
||||
ipr_mask_and_clear_interrupts(ioa_cfg, ~IPR_PCII_IOA_TRANS_TO_OPER);
|
||||
rc = request_irq(pdev->irq, ipr_isr, IRQF_SHARED, IPR_NAME, ioa_cfg);
|
||||
|
|
Loading…
Reference in New Issue