From 472880c73da124b6cb5cbc31a36754aa62935afe Mon Sep 17 00:00:00 2001 From: Brian Niebuhr Date: Mon, 16 Aug 2010 10:28:53 +0530 Subject: [PATCH] spi: davinci: remove 'wait_enable' platform data member The SPI_READY bit of struct spi_device:mode serves the purpose of letting the SPI master know if the slave can signal if it is ready for transfer or not. The 'wait_enable' platform data was duplicating this functionality. Use the framework provided method of indicating this capability. Signed-off-by: Brian Niebuhr Tested-By: Michael Williamson Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/include/mach/spi.h | 1 - drivers/spi/davinci_spi.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/mach-davinci/include/mach/spi.h b/arch/arm/mach-davinci/include/mach/spi.h index 734d1fb99614..fe699140269c 100644 --- a/arch/arm/mach-davinci/include/mach/spi.h +++ b/arch/arm/mach-davinci/include/mach/spi.h @@ -32,7 +32,6 @@ struct davinci_spi_platform_data { u8 wdelay; u8 odd_parity; u8 parity_enable; - u8 wait_enable; u8 timer_disable; u8 clk_internal; u8 intr_level; diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c index 17269ad54a99..54808577c121 100644 --- a/drivers/spi/davinci_spi.c +++ b/drivers/spi/davinci_spi.c @@ -522,7 +522,7 @@ static int davinci_spi_setup(struct spi_device *spi) SPIFMT_PARITYENA_MASK, spi->chip_select); - if (davinci_spi->pdata->wait_enable) + if (spi->mode & SPI_READY) set_fmt_bits(davinci_spi->base, SPIFMT_WAITENA_MASK, spi->chip_select);