From 46992a17a853c537c77a99e67912c4f6317a71cb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Fri, 26 May 2017 20:06:07 +0200 Subject: [PATCH] ARM: dts: at91-sama5d4: use IRQ_TYPE_* to specify irq flags MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to the binding documentation and the source code the atmel-gpio controller takes IRQ_TYPE_* as its flags values, not GPIO_ACTIVE_*. This patch uses the right variable type which yields the same result when compiled. Note that this might be wrong and actually IRQ_TYPE_LEVEL_LOW is intended by the dt author. Signed-off-by: Uwe Kleine-König Acked-by: Marek Vasut Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi index b5a5a91bc2ef..b813fdfa2842 100644 --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi @@ -75,7 +75,7 @@ reg = <0>; clocks = <&clk20m>; interrupt-parent = <&pioE>; - interrupts = <6 GPIO_ACTIVE_LOW>; + interrupts = <6 IRQ_TYPE_EDGE_RISING>; spi-max-frequency = <10000000>; }; @@ -84,7 +84,7 @@ reg = <1>; clocks = <&clk20m>; interrupt-parent = <&pioE>; - interrupts = <7 GPIO_ACTIVE_LOW>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; spi-max-frequency = <10000000>; }; };