Char/Misc driver patches for 5.1-rc1

Here is the big char/misc driver patch pull request for 5.1-rc1.
 
 The largest thing by far is the new habanalabs driver for their AI
 accelerator chip.  For now it is in the drivers/misc directory but will
 probably move to a new directory soon along with other drivers of this
 type.
 
 Other than that, just the usual set of individual driver updates and
 fixes.  There's an "odd" merge in here from the DRM tree that they asked
 me to do as the MEI driver is starting to interact with the i915 driver,
 and it needed some coordination.  All of those patches have been
 properly acked by the relevant subsystem maintainers.
 
 All of these have been in linux-next with no reported issues, most for
 quite some time.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+dPQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ym1fACgvpZAxjNzoRQJ6f06tc8ujtPk9rUAnR+tCtrZ
 9e3l7H76oe33o96Qjhor
 =8A2k
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver patch pull request for 5.1-rc1.

  The largest thing by far is the new habanalabs driver for their AI
  accelerator chip. For now it is in the drivers/misc directory but will
  probably move to a new directory soon along with other drivers of this
  type.

  Other than that, just the usual set of individual driver updates and
  fixes. There's an "odd" merge in here from the DRM tree that they
  asked me to do as the MEI driver is starting to interact with the i915
  driver, and it needed some coordination. All of those patches have
  been properly acked by the relevant subsystem maintainers.

  All of these have been in linux-next with no reported issues, most for
  quite some time"

* tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (219 commits)
  habanalabs: adjust Kconfig to fix build errors
  habanalabs: use %px instead of %p in error print
  habanalabs: use do_div for 64-bit divisions
  intel_th: gth: Fix an off-by-one in output unassigning
  habanalabs: fix little-endian<->cpu conversion warnings
  habanalabs: use NULL to initialize array of pointers
  habanalabs: fix little-endian<->cpu conversion warnings
  habanalabs: soft-reset device if context-switch fails
  habanalabs: print pointer using %p
  habanalabs: fix memory leak with CBs with unaligned size
  habanalabs: return correct error code on MMU mapping failure
  habanalabs: add comments in uapi/misc/habanalabs.h
  habanalabs: extend QMAN0 job timeout
  habanalabs: set DMA0 completion to SOB 1007
  habanalabs: fix validation of WREG32 to DMA completion
  habanalabs: fix mmu cache registers init
  habanalabs: disable CPU access on timeouts
  habanalabs: add MMU DRAM default page mapping
  habanalabs: Dissociate RAZWI info from event types
  misc/habanalabs: adjust Kconfig to fix build errors
  ...

CREDITS

@@ -1221,7 +1221,7 @@ S: Brazil
 
 N: Oded Gabbay
 E: oded.gabbay@gmail.com
-D: AMD KFD maintainer
+D: HabanaLabs and AMD KFD maintainer
 S: 12 Shraga Raphaeli
 S: Petah-Tikva, 4906418
 S: Israel

Documentation/ABI/stable/sysfs-bus-vmbus

@@ -146,3 +146,36 @@ KernelVersion:	4.16
 Contact:	Stephen Hemminger <sthemmin@microsoft.com>
 Description:	Binary file created by uio_hv_generic for ring buffer
 Users:		Userspace drivers
+
+What:           /sys/bus/vmbus/devices/<UUID>/channels/<N>/intr_in_full
+Date:           February 2019
+KernelVersion:  5.0
+Contact:        Michael Kelley <mikelley@microsoft.com>
+Description:    Number of guest to host interrupts caused by the inbound ring
+		buffer transitioning from full to not full while a packet is
+		waiting for buffer space to become available
+Users:          Debugging tools
+
+What:           /sys/bus/vmbus/devices/<UUID>/channels/<N>/intr_out_empty
+Date:           February 2019
+KernelVersion:  5.0
+Contact:        Michael Kelley <mikelley@microsoft.com>
+Description:    Number of guest to host interrupts caused by the outbound ring
+		buffer transitioning from empty to not empty
+Users:          Debugging tools
+
+What:           /sys/bus/vmbus/devices/<UUID>/channels/<N>/out_full_first
+Date:           February 2019
+KernelVersion:  5.0
+Contact:        Michael Kelley <mikelley@microsoft.com>
+Description:    Number of write operations that were the first to encounter an
+		outbound ring buffer full condition
+Users:          Debugging tools
+
+What:           /sys/bus/vmbus/devices/<UUID>/channels/<N>/out_full_total
+Date:           February 2019
+KernelVersion:  5.0
+Contact:        Michael Kelley <mikelley@microsoft.com>
+Description:    Total number of write operations that encountered an outbound
+		ring buffer full condition
+Users:          Debugging tools

Documentation/ABI/testing/debugfs-driver-habanalabs

@@ -0,0 +1,126 @@
+What:           /sys/kernel/debug/habanalabs/hl<n>/addr
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Sets the device address to be used for read or write through
+                PCI bar. The acceptable value is a string that starts with "0x"
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/command_buffers
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays a list with information about the currently allocated
+                command buffers
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/command_submission
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays a list with information about the currently active
+                command submissions
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/command_submission_jobs
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays a list with detailed information about each JOB (CB) of
+                each active command submission
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/data32
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Allows the root user to read or write directly through the
+                device's PCI bar. Writing to this file generates a write
+                transaction while reading from the file generates a read
+                transcation. This custom interface is needed (instead of using
+                the generic Linux user-space PCI mapping) because the DDR bar
+                is very small compared to the DDR memory and only the driver can
+                move the bar before and after the transaction
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/device
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Enables the root user to set the device to specific state.
+                Valid values are "disable", "enable", "suspend", "resume".
+                User can read this property to see the valid values
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_addr
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Sets I2C device address for I2C transaction that is generated
+                by the device's CPU
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_bus
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Sets I2C bus address for I2C transaction that is generated by
+                the device's CPU
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_data
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Triggers an I2C transaction that is generated by the device's
+                CPU. Writing to this file generates a write transaction while
+                reading from the file generates a read transcation
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_reg
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Sets I2C register id for I2C transaction that is generated by
+                the device's CPU
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/led0
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Sets the state of the first S/W led on the device
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/led1
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Sets the state of the second S/W led on the device
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/led2
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Sets the state of the third S/W led on the device
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/mmu
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays the hop values and physical address for a given ASID
+                and virtual address. The user should write the ASID and VA into
+                the file and then read the file to get the result.
+                e.g. to display info about VA 0x1000 for ASID 1 you need to do:
+                echo "1 0x1000" > /sys/kernel/debug/habanalabs/hl0/mmu
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/set_power_state
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Sets the PCI power state. Valid values are "1" for D0 and "2"
+                for D3Hot
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/userptr
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays a list with information about the currently user
+                pointers (user virtual addresses) that are pinned and mapped
+                to DMA addresses
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/vm
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays a list with information about all the active virtual
+                address mappings per ASID

Documentation/ABI/testing/sysfs-bus-intel_th-output-devices

@@ -3,11 +3,13 @@ Date:		June 2015
 KernelVersion:	4.3
 Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
 Description:	(RW) Writes of 1 or 0 enable or disable trace output to this
-		output device. Reads return current status.
+		output device. Reads return current status. Requires that the
+		correstponding output port driver be loaded.
 
 What:		/sys/bus/intel_th/devices/<intel_th_id>-msc<msc-id>/port
 Date:		June 2015
 KernelVersion:	4.3
 Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
 Description:	(RO) Port number, corresponding to this output device on the
-		switch (GTH).
+		switch (GTH) or "unassigned" if the corresponding output
+		port driver is not loaded.

Documentation/ABI/testing/sysfs-driver-habanalabs

@@ -0,0 +1,190 @@
+What:           /sys/class/habanalabs/hl<n>/armcp_kernel_ver
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Version of the Linux kernel running on the device's CPU
+
+What:           /sys/class/habanalabs/hl<n>/armcp_ver
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Version of the application running on the device's CPU
+
+What:           /sys/class/habanalabs/hl<n>/cpld_ver
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Version of the Device's CPLD F/W
+
+What:           /sys/class/habanalabs/hl<n>/device_type
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays the code name of the device according to its type.
+                The supported values are: "GOYA"
+
+What:           /sys/class/habanalabs/hl<n>/eeprom
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    A binary file attribute that contains the contents of the
+                on-board EEPROM
+
+What:           /sys/class/habanalabs/hl<n>/fuse_ver
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays the device's version from the eFuse
+
+What:           /sys/class/habanalabs/hl<n>/hard_reset
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Interface to trigger a hard-reset operation for the device.
+                Hard-reset will reset ALL internal components of the device
+                except for the PCI interface and the internal PLLs
+
+What:           /sys/class/habanalabs/hl<n>/hard_reset_cnt
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays how many times the device have undergone a hard-reset
+                operation since the driver was loaded
+
+What:           /sys/class/habanalabs/hl<n>/high_pll
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Allows the user to set the maximum clock frequency for MME, TPC
+                and IC when the power management profile is set to "automatic".
+
+What:           /sys/class/habanalabs/hl<n>/ic_clk
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Allows the user to set the maximum clock frequency of the
+                Interconnect fabric. Writes to this parameter affect the device
+                only when the power management profile is set to "manual" mode.
+                The device IC clock might be set to lower value then the
+                maximum. The user should read the ic_clk_curr to see the actual
+                frequency value of the IC
+
+What:           /sys/class/habanalabs/hl<n>/ic_clk_curr
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays the current clock frequency of the Interconnect fabric
+
+What:           /sys/class/habanalabs/hl<n>/infineon_ver
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Version of the Device's power supply F/W code
+
+What:           /sys/class/habanalabs/hl<n>/max_power
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Allows the user to set the maximum power consumption of the
+                device in milliwatts.
+
+What:           /sys/class/habanalabs/hl<n>/mme_clk
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Allows the user to set the maximum clock frequency of the
+                MME compute engine. Writes to this parameter affect the device
+                only when the power management profile is set to "manual" mode.
+                The device MME clock might be set to lower value then the
+                maximum. The user should read the mme_clk_curr to see the actual
+                frequency value of the MME
+
+What:           /sys/class/habanalabs/hl<n>/mme_clk_curr
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays the current clock frequency of the MME compute engine
+
+What:           /sys/class/habanalabs/hl<n>/pci_addr
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays the PCI address of the device. This is needed so the
+                user would be able to open a device based on its PCI address
+
+What:           /sys/class/habanalabs/hl<n>/pm_mng_profile
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Power management profile. Values are "auto", "manual". In "auto"
+                mode, the driver will set the maximum clock frequency to a high
+                value when a user-space process opens the device's file (unless
+                it was already opened by another process). The driver will set
+                the max clock frequency to a low value when there are no user
+                processes that are opened on the device's file. In "manual"
+                mode, the user sets the maximum clock frequency by writing to
+                ic_clk, mme_clk and tpc_clk
+
+
+What:           /sys/class/habanalabs/hl<n>/preboot_btl_ver
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Version of the device's preboot F/W code
+
+What:           /sys/class/habanalabs/hl<n>/soft_reset
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Interface to trigger a soft-reset operation for the device.
+                Soft-reset will reset only the compute and DMA engines of the
+                device
+
+What:           /sys/class/habanalabs/hl<n>/soft_reset_cnt
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays how many times the device have undergone a soft-reset
+                operation since the driver was loaded
+
+What:           /sys/class/habanalabs/hl<n>/status
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Status of the card: "Operational", "Malfunction", "In reset".
+
+What:           /sys/class/habanalabs/hl<n>/thermal_ver
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Version of the Device's thermal daemon
+
+What:           /sys/class/habanalabs/hl<n>/tpc_clk
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Allows the user to set the maximum clock frequency of the
+                TPC compute engines. Writes to this parameter affect the device
+                only when the power management profile is set to "manual" mode.
+                The device TPC clock might be set to lower value then the
+                maximum. The user should read the tpc_clk_curr to see the actual
+                frequency value of the TPC
+
+What:           /sys/class/habanalabs/hl<n>/tpc_clk_curr
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays the current clock frequency of the TPC compute engines
+
+What:           /sys/class/habanalabs/hl<n>/uboot_ver
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Version of the u-boot running on the device's CPU
+
+What:           /sys/class/habanalabs/hl<n>/write_open_cnt
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays the total number of user processes that are currently
+                opened on the device's file

Documentation/devicetree/bindings/extcon/extcon-ptn5150.txt

@@ -0,0 +1,27 @@
+* PTN5150 CC (Configuration Channel) Logic device
+
+PTN5150 is a small thin low power CC logic chip supporting the USB Type-C
+connector application with CC control logic detection and indication functions.
+It is interfaced to the host controller using an I2C interface.
+
+Required properties:
+- compatible: should be "nxp,ptn5150"
+- reg: specifies the I2C slave address of the device
+- int-gpio: should contain a phandle and GPIO specifier for the GPIO pin
+	connected to the PTN5150's INTB pin.
+- vbus-gpio: should contain a phandle and GPIO specifier for the GPIO pin which
+	is used to control VBUS.
+- pinctrl-names : a pinctrl state named "default" must be defined.
+- pinctrl-0 : phandle referencing pin configuration of interrupt and vbus
+	control.
+
+Example:
+	ptn5150@1d {
+		compatible = "nxp,ptn5150";
+		reg = <0x1d>;
+		int-gpio = <&msmgpio 78 GPIO_ACTIVE_HIGH>;
+		vbus-gpio = <&msmgpio 148 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ptn5150_default>;
+		status = "okay";
+	};

Documentation/devicetree/bindings/gnss/gnss.txt

@@ -17,6 +17,7 @@ Required properties:
 		  represents
 
 Optional properties:
+- lna-supply	: Separate supply for an LNA
 - enable-gpios	: GPIO used to enable the device
 - timepulse-gpios	: Time pulse GPIO
 

Documentation/devicetree/bindings/gnss/mediatek.txt

@@ -0,0 +1,35 @@
+Mediatek-based GNSS Receiver DT binding
+
+Mediatek chipsets are used in GNSS-receiver modules produced by several
+vendors and can use a UART interface.
+
+Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic
+properties.
+
+Required properties:
+
+- compatible	: Must be
+
+			"globaltop,pa6h"
+
+- vcc-supply	: Main voltage regulator (pin name: VCC)
+
+Optional properties:
+
+- current-speed		: Default UART baud rate
+- gnss-fix-gpios	: GPIO used to determine device position fix state
+			  (pin name: FIX, 3D_FIX)
+- reset-gpios		: GPIO used to reset the device (pin name: RESET, NRESET)
+- timepulse-gpios	: Time pulse GPIO (pin name: PPS1, 1PPS)
+- vbackup-supply	: Backup voltage regulator (pin name: VBAT, VBACKUP)
+
+Example:
+
+serial@1234 {
+	compatible = "ns16550a";
+
+	gnss {
+		compatible = "globaltop,pa6h";
+		vcc-supply = <&vcc_3v3>;
+	};
+};

Documentation/devicetree/bindings/gnss/sirfstar.txt

@@ -12,6 +12,7 @@ Required properties:
 
 			"fastrax,uc430"
 			"linx,r4"
+			"wi2wi,w2sg0004"
 			"wi2wi,w2sg0008i"
 			"wi2wi,w2sg0084i"
 

Documentation/devicetree/bindings/interconnect/interconnect.txt

@@ -0,0 +1,60 @@
+Interconnect Provider Device Tree Bindings
+=========================================
+
+The purpose of this document is to define a common set of generic interconnect
+providers/consumers properties.
+
+
+= interconnect providers =
+
+The interconnect provider binding is intended to represent the interconnect
+controllers in the system. Each provider registers a set of interconnect
+nodes, which expose the interconnect related capabilities of the interconnect
+to consumer drivers. These capabilities can be throughput, latency, priority
+etc. The consumer drivers set constraints on interconnect path (or endpoints)
+depending on the use case. Interconnect providers can also be interconnect
+consumers, such as in the case where two network-on-chip fabrics interface
+directly.
+
+Required properties:
+- compatible : contains the interconnect provider compatible string
+- #interconnect-cells : number of cells in a interconnect specifier needed to
+			encode the interconnect node id
+
+Example:
+
+		snoc: interconnect@580000 {
+			compatible = "qcom,msm8916-snoc";
+			#interconnect-cells = <1>;
+			reg = <0x580000 0x14000>;
+			clock-names = "bus_clk", "bus_a_clk";
+			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
+		};
+
+
+= interconnect consumers =
+
+The interconnect consumers are device nodes which dynamically express their
+bandwidth requirements along interconnect paths they are connected to. There
+can be multiple interconnect providers on a SoC and the consumer may consume
+multiple paths from different providers depending on use case and the
+components it has to interact with.
+
+Required properties:
+interconnects : Pairs of phandles and interconnect provider specifier to denote
+	        the edge source and destination ports of the interconnect path.
+
+Optional properties:
+interconnect-names : List of interconnect path name strings sorted in the same
+		     order as the interconnects property. Consumers drivers will use
+		     interconnect-names to match interconnect paths with interconnect
+		     specifier pairs.
+
+Example:
+
+	sdhci@7864000 {
+		...
+		interconnects = <&pnoc MASTER_SDCC_1 &bimc SLAVE_EBI_CH0>;
+		interconnect-names = "sdhc-mem";
+	};

Documentation/devicetree/bindings/interconnect/qcom,sdm845.txt

@@ -0,0 +1,24 @@
+Qualcomm SDM845 Network-On-Chip interconnect driver binding
+-----------------------------------------------------------
+
+SDM845 interconnect providers support system bandwidth requirements through
+RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+able to communicate with the BCM through the Resource State Coordinator (RSC)
+associated with each execution environment. Provider nodes must reside within
+an RPMh device node pertaining to their RSC and each provider maps to a single
+RPMh resource.
+
+Required properties :
+- compatible : shall contain only one of the following:
+			"qcom,sdm845-rsc-hlos"
+- #interconnect-cells : should contain 1
+
+Examples:
+
+apps_rsc: rsc {
+	rsc_hlos: interconnect {
+		compatible = "qcom,sdm845-rsc-hlos";
+		#interconnect-cells = <1>;
+	};
+};
+

Documentation/devicetree/bindings/misc/qcom,fastrpc.txt

@@ -0,0 +1,78 @@
+Qualcomm Technologies, Inc. FastRPC Driver
+
+The FastRPC implements an IPC (Inter-Processor Communication)
+mechanism that allows for clients to transparently make remote method
+invocations across DSP and APPS boundaries. This enables developers
+to offload tasks to the DSP and free up the application processor for
+other tasks.
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "qcom,fastrpc"
+
+- label
+	Usage: required
+	Value type: <string>
+	Definition: should specify the dsp domain name this fastrpc
+	corresponds to. must be one of this: "adsp", "mdsp", "sdsp", "cdsp"
+
+- #address-cells
+	Usage: required
+	Value type: <u32>
+	Definition: Must be 1
+
+- #size-cells
+	Usage: required
+	Value type: <u32>
+	Definition: Must be 0
+
+= COMPUTE BANKS
+Each subnode of the Fastrpc represents compute context banks available
+on the dsp.
+- All Compute context banks MUST contain the following properties:
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "qcom,fastrpc-compute-cb"
+
+- reg
+	Usage: required
+	Value type: <u32>
+	Definition: Context Bank ID.
+
+- qcom,nsessions:
+	Usage: Optional
+	Value type: <u32>
+	Defination: A value indicating how many sessions can share this
+		    context bank. Defaults to 1 when this property
+		    is not specified.
+
+Example:
+
+adsp-pil {
+	compatible = "qcom,msm8996-adsp-pil";
+	...
+	smd-edge {
+		label = "lpass";
+		fastrpc {
+			compatible = "qcom,fastrpc";
+			qcom,smd-channels = "fastrpcsmd-apps-dsp";
+			label = "adsp";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cb@1 {
+				compatible = "qcom,fastrpc-compute-cb";
+				reg = <1>;
+			};
+
+			cb@2 {
+				compatible = "qcom,fastrpc-compute-cb";
+				reg = <2>;
+			};
+			...
+		};
+	};
+};

Documentation/devicetree/bindings/nvmem/imx-ocotp.txt

@@ -1,7 +1,7 @@
 Freescale i.MX6 On-Chip OTP Controller (OCOTP) device tree bindings
 
 This binding represents the on-chip eFuse OTP controller found on
-i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL and i.MX6SLL SoCs.
+i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ and i.MX6SLL SoCs.
 
 Required properties:
 - compatible: should be one of
@@ -9,8 +9,10 @@ Required properties:
 	"fsl,imx6sl-ocotp" (i.MX6SL), or
 	"fsl,imx6sx-ocotp" (i.MX6SX),
 	"fsl,imx6ul-ocotp" (i.MX6UL),
+	"fsl,imx6ull-ocotp" (i.MX6ULL/ULZ),
 	"fsl,imx7d-ocotp" (i.MX7D/S),
 	"fsl,imx6sll-ocotp" (i.MX6SLL),
+	"fsl,imx7ulp-ocotp" (i.MX7ULP),
 	followed by "syscon".
 - #address-cells : Should be 1
 - #size-cells : Should be 1

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -154,6 +154,7 @@ geniatech	Geniatech, Inc.
 giantec	Giantec Semiconductor, Inc.
 giantplus	Giantplus Technology Co., Ltd.
 globalscale	Globalscale Technologies, Inc.
+globaltop	GlobalTop Technology, Inc.
 gmt	Global Mixed-mode Technology, Inc.
 goodix	Shenzhen Huiding Technology Co., Ltd.
 google	Google, Inc.

Documentation/driver-api/component.rst

@@ -0,0 +1,17 @@
+======================================
+Component Helper for Aggregate Drivers
+======================================
+
+.. kernel-doc:: drivers/base/component.c
+   :doc: overview
+
+
+API
+===
+
+.. kernel-doc:: include/linux/component.h
+   :internal:
+
+.. kernel-doc:: drivers/base/component.c
+   :export:
+

Documentation/driver-api/device_link.rst

@@ -1,6 +1,9 @@
 .. |struct dev_pm_domain| replace:: :c:type:`struct dev_pm_domain <dev_pm_domain>`
 .. |struct generic_pm_domain| replace:: :c:type:`struct generic_pm_domain <generic_pm_domain>`
 
+
+.. _device_link:
+
 ============
 Device links
 ============

Documentation/driver-api/index.rst

@@ -22,6 +22,7 @@ available subsections can be seen below.
    device_connection
    dma-buf
    device_link
+   component
    message-based
    sound
    frame-buffer

Documentation/interconnect/interconnect.rst

@@ -0,0 +1,94 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================
+GENERIC SYSTEM INTERCONNECT SUBSYSTEM
+=====================================
+
+Introduction
+------------
+
+This framework is designed to provide a standard kernel interface to control
+the settings of the interconnects on an SoC. These settings can be throughput,
+latency and priority between multiple interconnected devices or functional
+blocks. This can be controlled dynamically in order to save power or provide
+maximum performance.
+
+The interconnect bus is hardware with configurable parameters, which can be
+set on a data path according to the requests received from various drivers.
+An example of interconnect buses are the interconnects between various
+components or functional blocks in chipsets. There can be multiple interconnects
+on an SoC that can be multi-tiered.
+
+Below is a simplified diagram of a real-world SoC interconnect bus topology.
+
+::
+
+ +----------------+    +----------------+
+ | HW Accelerator |--->|      M NoC     |<---------------+
+ +----------------+    +----------------+                |
+                         |      |                    +------------+
+  +-----+  +-------------+      V       +------+     |            |
+  | DDR |  |                +--------+  | PCIe |     |            |
+  +-----+  |                | Slaves |  +------+     |            |
+    ^ ^    |                +--------+     |         |   C NoC    |
+    | |    V                               V         |            |
+ +------------------+   +------------------------+   |            |   +-----+
+ |                  |-->|                        |-->|            |-->| CPU |
+ |                  |-->|                        |<--|            |   +-----+
+ |     Mem NoC      |   |         S NoC          |   +------------+
+ |                  |<--|                        |---------+    |
+ |                  |<--|                        |<------+ |    |   +--------+
+ +------------------+   +------------------------+       | |    +-->| Slaves |
+   ^  ^    ^    ^          ^                             | |        +--------+
+   |  |    |    |          |                             | V
+ +------+  |  +-----+   +-----+  +---------+   +----------------+   +--------+
+ | CPUs |  |  | GPU |   | DSP |  | Masters |-->|       P NoC    |-->| Slaves |
+ +------+  |  +-----+   +-----+  +---------+   +----------------+   +--------+
+           |
+       +-------+
+       | Modem |
+       +-------+
+
+Terminology
+-----------
+
+Interconnect provider is the software definition of the interconnect hardware.
+The interconnect providers on the above diagram are M NoC, S NoC, C NoC, P NoC
+and Mem NoC.
+
+Interconnect node is the software definition of the interconnect hardware
+port. Each interconnect provider consists of multiple interconnect nodes,
+which are connected to other SoC components including other interconnect
+providers. The point on the diagram where the CPUs connect to the memory is
+called an interconnect node, which belongs to the Mem NoC interconnect provider.
+
+Interconnect endpoints are the first or the last element of the path. Every
+endpoint is a node, but not every node is an endpoint.
+
+Interconnect path is everything between two endpoints including all the nodes
+that have to be traversed to reach from a source to destination node. It may
+include multiple master-slave pairs across several interconnect providers.
+
+Interconnect consumers are the entities which make use of the data paths exposed
+by the providers. The consumers send requests to providers requesting various
+throughput, latency and priority. Usually the consumers are device drivers, that
+send request based on their needs. An example for a consumer is a video decoder
+that supports various formats and image sizes.
+
+Interconnect providers
+----------------------
+
+Interconnect provider is an entity that implements methods to initialize and
+configure interconnect bus hardware. The interconnect provider drivers should
+be registered with the interconnect provider core.
+
+.. kernel-doc:: include/linux/interconnect-provider.h
+
+Interconnect consumers
+----------------------
+
+Interconnect consumers are the clients which use the interconnect APIs to
+get paths between endpoints and set their bandwidth/latency/QoS requirements
+for these interconnect paths.
+
+.. kernel-doc:: include/linux/interconnect.h

MAINTAINERS

@@ -6699,6 +6699,15 @@ F:	drivers/clocksource/h8300_*.c
 F:	drivers/clk/h8300/
 F:	drivers/irqchip/irq-renesas-h8*.c
 
+HABANALABS PCI DRIVER
+M:	Oded Gabbay <oded.gabbay@gmail.com>
+T:	git https://github.com/HabanaAI/linux.git
+S:	Supported
+F:	drivers/misc/habanalabs/
+F:	include/uapi/misc/habanalabs.h
+F:	Documentation/ABI/testing/sysfs-driver-habanalabs
+F:	Documentation/ABI/testing/debugfs-driver-habanalabs
+
 HACKRF MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
@@ -7056,7 +7065,7 @@ M:	Haiyang Zhang <haiyangz@microsoft.com>
 M:	Stephen Hemminger <sthemmin@microsoft.com>
 M:	Sasha Levin <sashal@kernel.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux.git
-L:	devel@linuxdriverproject.org
+L:	linux-hyperv@vger.kernel.org
 S:	Supported
 F:	Documentation/networking/device_drivers/microsoft/netvsc.txt
 F:	arch/x86/include/asm/mshyperv.h
@@ -7941,6 +7950,16 @@ L:	linux-gpio@vger.kernel.org
 S:	Maintained
 F:	drivers/gpio/gpio-intel-mid.c
 
+INTERCONNECT API
+M:	Georgi Djakov <georgi.djakov@linaro.org>
+S:	Maintained
+F:	Documentation/interconnect/
+F:	Documentation/devicetree/bindings/interconnect/
+F:	drivers/interconnect/
+F:	include/dt-bindings/interconnect/
+F:	include/linux/interconnect-provider.h
+F:	include/linux/interconnect.h
+
 INVENSENSE MPU-3050 GYROSCOPE DRIVER
 M:	Linus Walleij <linus.walleij@linaro.org>
 L:	linux-iio@vger.kernel.org

arch/Kconfig

@@ -711,6 +711,9 @@ config HAVE_ARCH_HASH
 	  file which provides platform-specific implementations of some
 	  functions in <linux/hash.h> or fs/namei.c.
 
+config HAVE_ARCH_NVRAM_OPS
+	bool
+
 config ISA_BUS_API
 	def_bool ISA
 

arch/m68k/Kconfig.machine

@@ -16,6 +16,7 @@ config ATARI
 	bool "Atari support"
 	depends on MMU
 	select MMU_MOTOROLA if MMU
+	select HAVE_ARCH_NVRAM_OPS
 	help
 	  This option enables support for the 68000-based Atari series of
 	  computers (including the TT, Falcon and Medusa). If you plan to use
@@ -26,6 +27,7 @@ config MAC
 	bool "Macintosh support"
 	depends on MMU
 	select MMU_MOTOROLA if MMU
+	select HAVE_ARCH_NVRAM_OPS
 	help
 	  This option enables support for the Apple Macintosh series of
 	  computers (yes, there is experimental support now, at least for part

arch/m68k/atari/Makefile

@@ -6,3 +6,5 @@ obj-y		:= config.o time.o debug.o ataints.o stdma.o \
 			atasound.o stram.o
 
 obj-$(CONFIG_ATARI_KBD_CORE)	+= atakeyb.o
+
+obj-$(CONFIG_NVRAM:m=y)		+= nvram.o

arch/m68k/atari/nvram.c

@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * CMOS/NV-RAM driver for Atari. Adapted from drivers/char/nvram.c.
+ * Copyright (C) 1997 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>
+ * idea by and with help from Richard Jelinek <rj@suse.de>
+ * Portions copyright (c) 2001,2002 Sun Microsystems (thockin@sun.com)
+ * Further contributions from Cesar Barros, Erik Gilling, Tim Hockin and
+ * Wim Van Sebroeck.
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/mc146818rtc.h>
+#include <linux/module.h>
+#include <linux/nvram.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <asm/atarihw.h>
+#include <asm/atariints.h>
+
+#define NVRAM_BYTES		50
+
+/* It is worth noting that these functions all access bytes of general
+ * purpose memory in the NVRAM - that is to say, they all add the
+ * NVRAM_FIRST_BYTE offset. Pass them offsets into NVRAM as if you did not
+ * know about the RTC cruft.
+ */
+
+/* Note that *all* calls to CMOS_READ and CMOS_WRITE must be done with
+ * rtc_lock held. Due to the index-port/data-port design of the RTC, we
+ * don't want two different things trying to get to it at once. (e.g. the
+ * periodic 11 min sync from kernel/time/ntp.c vs. this driver.)
+ */
+
+static unsigned char __nvram_read_byte(int i)
+{
+	return CMOS_READ(NVRAM_FIRST_BYTE + i);
+}
+
+/* This races nicely with trying to read with checksum checking */
+static void __nvram_write_byte(unsigned char c, int i)
+{
+	CMOS_WRITE(c, NVRAM_FIRST_BYTE + i);
+}
+
+/* On Ataris, the checksum is over all bytes except the checksum bytes
+ * themselves; these are at the very end.
+ */
+#define ATARI_CKS_RANGE_START	0
+#define ATARI_CKS_RANGE_END	47
+#define ATARI_CKS_LOC		48
+
+static int __nvram_check_checksum(void)
+{
+	int i;
+	unsigned char sum = 0;
+
+	for (i = ATARI_CKS_RANGE_START; i <= ATARI_CKS_RANGE_END; ++i)
+		sum += __nvram_read_byte(i);
+	return (__nvram_read_byte(ATARI_CKS_LOC) == (~sum & 0xff)) &&
+	       (__nvram_read_byte(ATARI_CKS_LOC + 1) == (sum & 0xff));
+}
+
+static void __nvram_set_checksum(void)
+{
+	int i;
+	unsigned char sum = 0;
+
+	for (i = ATARI_CKS_RANGE_START; i <= ATARI_CKS_RANGE_END; ++i)
+		sum += __nvram_read_byte(i);
+	__nvram_write_byte(~sum, ATARI_CKS_LOC);
+	__nvram_write_byte(sum, ATARI_CKS_LOC + 1);
+}
+
+long atari_nvram_set_checksum(void)
+{
+	spin_lock_irq(&rtc_lock);
+	__nvram_set_checksum();
+	spin_unlock_irq(&rtc_lock);
+	return 0;
+}
+
+long atari_nvram_initialize(void)
+{
+	loff_t i;
+
+	spin_lock_irq(&rtc_lock);
+	for (i = 0; i < NVRAM_BYTES; ++i)
+		__nvram_write_byte(0, i);
+	__nvram_set_checksum();
+	spin_unlock_irq(&rtc_lock);
+	return 0;
+}
+
+ssize_t atari_nvram_read(char *buf, size_t count, loff_t *ppos)
+{
+	char *p = buf;
+	loff_t i;
+
+	spin_lock_irq(&rtc_lock);
+	if (!__nvram_check_checksum()) {
+		spin_unlock_irq(&rtc_lock);
+		return -EIO;
+	}
+	for (i = *ppos; count > 0 && i < NVRAM_BYTES; --count, ++i, ++p)
+		*p = __nvram_read_byte(i);
+	spin_unlock_irq(&rtc_lock);
+
+	*ppos = i;
+	return p - buf;
+}
+
+ssize_t atari_nvram_write(char *buf, size_t count, loff_t *ppos)
+{
+	char *p = buf;
+	loff_t i;
+
+	spin_lock_irq(&rtc_lock);
+	if (!__nvram_check_checksum()) {
+		spin_unlock_irq(&rtc_lock);
+		return -EIO;
+	}
+	for (i = *ppos; count > 0 && i < NVRAM_BYTES; --count, ++i, ++p)
+		__nvram_write_byte(*p, i);
+	__nvram_set_checksum();
+	spin_unlock_irq(&rtc_lock);
+
+	*ppos = i;
+	return p - buf;
+}
+
+ssize_t atari_nvram_get_size(void)
+{
+	return NVRAM_BYTES;
+}
+
+#ifdef CONFIG_PROC_FS
+static struct {
+	unsigned char val;
+	const char *name;
+} boot_prefs[] = {
+	{ 0x80, "TOS" },
+	{ 0x40, "ASV" },
+	{ 0x20, "NetBSD (?)" },
+	{ 0x10, "Linux" },
+	{ 0x00, "unspecified" },
+};
+
+static const char * const languages[] = {
+	"English (US)",
+	"German",
+	"French",
+	"English (UK)",
+	"Spanish",
+	"Italian",
+	"6 (undefined)",
+	"Swiss (French)",
+	"Swiss (German)",
+};
+
+static const char * const dateformat[] = {
+	"MM%cDD%cYY",
+	"DD%cMM%cYY",
+	"YY%cMM%cDD",
+	"YY%cDD%cMM",
+	"4 (undefined)",
+	"5 (undefined)",
+	"6 (undefined)",
+	"7 (undefined)",
+};
+
+static const char * const colors[] = {
+	"2", "4", "16", "256", "65536", "??", "??", "??"
+};
+
+static void atari_nvram_proc_read(unsigned char *nvram, struct seq_file *seq,
+				  void *offset)
+{
+	int checksum;
+	int i;
+	unsigned int vmode;
+
+	spin_lock_irq(&rtc_lock);
+	checksum = __nvram_check_checksum();
+	spin_unlock_irq(&rtc_lock);
+
+	seq_printf(seq, "Checksum status  : %svalid\n", checksum ? "" : "not ");
+
+	seq_puts(seq, "Boot preference  : ");
+	for (i = ARRAY_SIZE(boot_prefs) - 1; i >= 0; --i)
+		if (nvram[1] == boot_prefs[i].val) {
+			seq_printf(seq, "%s\n", boot_prefs[i].name);
+			break;
+		}
+	if (i < 0)
+		seq_printf(seq, "0x%02x (undefined)\n", nvram[1]);
+
+	seq_printf(seq, "SCSI arbitration : %s\n",
+		   (nvram[16] & 0x80) ? "on" : "off");
+	seq_puts(seq, "SCSI host ID     : ");
+	if (nvram[16] & 0x80)
+		seq_printf(seq, "%d\n", nvram[16] & 7);
+	else
+		seq_puts(seq, "n/a\n");
+
+	if (!MACH_IS_FALCON)
+		return;
+
+	seq_puts(seq, "OS language      : ");
+	if (nvram[6] < ARRAY_SIZE(languages))
+		seq_printf(seq, "%s\n", languages[nvram[6]]);
+	else
+		seq_printf(seq, "%u (undefined)\n", nvram[6]);
+	seq_puts(seq, "Keyboard language: ");
+	if (nvram[7] < ARRAY_SIZE(languages))
+		seq_printf(seq, "%s\n", languages[nvram[7]]);
+	else
+		seq_printf(seq, "%u (undefined)\n", nvram[7]);
+	seq_puts(seq, "Date format      : ");
+	seq_printf(seq, dateformat[nvram[8] & 7],
+		   nvram[9] ? nvram[9] : '/', nvram[9] ? nvram[9] : '/');
+	seq_printf(seq, ", %dh clock\n", nvram[8] & 16 ? 24 : 12);
+	seq_puts(seq, "Boot delay       : ");
+	if (nvram[10] == 0)
+		seq_puts(seq, "default\n");
+	else
+		seq_printf(seq, "%ds%s\n", nvram[10],
+			   nvram[10] < 8 ? ", no memory test" : "");
+
+	vmode = (nvram[14] << 8) | nvram[15];
+	seq_printf(seq,
+		   "Video mode       : %s colors, %d columns, %s %s monitor\n",
+		   colors[vmode & 7], vmode & 8 ? 80 : 40,
+		   vmode & 16 ? "VGA" : "TV", vmode & 32 ? "PAL" : "NTSC");
+	seq_printf(seq,
+		   "                   %soverscan, compat. mode %s%s\n",
+		   vmode & 64 ? "" : "no ", vmode & 128 ? "on" : "off",
+		   vmode & 256 ?
+		   (vmode & 16 ? ", line doubling" : ", half screen") : "");
+}
+
+static int nvram_proc_read(struct seq_file *seq, void *offset)
+{
+	unsigned char contents[NVRAM_BYTES];
+	int i;
+
+	spin_lock_irq(&rtc_lock);
+	for (i = 0; i < NVRAM_BYTES; ++i)
+		contents[i] = __nvram_read_byte(i);
+	spin_unlock_irq(&rtc_lock);
+
+	atari_nvram_proc_read(contents, seq, offset);
+
+	return 0;
+}
+
+static int __init atari_nvram_init(void)
+{
+	if (!(MACH_IS_ATARI && ATARIHW_PRESENT(TT_CLK)))
+		return -ENODEV;
+
+	if (!proc_create_single("driver/nvram", 0, NULL, nvram_proc_read)) {
+		pr_err("nvram: can't create /proc/driver/nvram\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+device_initcall(atari_nvram_init);
+#endif /* CONFIG_PROC_FS */

arch/m68k/include/asm/atarihw.h

@@ -33,6 +33,12 @@ extern int atari_dont_touch_floppy_select;
 
 extern int atari_SCC_reset_done;
 
+extern ssize_t atari_nvram_read(char *, size_t, loff_t *);
+extern ssize_t atari_nvram_write(char *, size_t, loff_t *);
+extern ssize_t atari_nvram_get_size(void);
+extern long atari_nvram_set_checksum(void);
+extern long atari_nvram_initialize(void);
+
 /* convenience macros for testing machine type */
 #define MACH_IS_ST	((atari_mch_cookie >> 16) == ATARI_MCH_ST)
 #define MACH_IS_STE	((atari_mch_cookie >> 16) == ATARI_MCH_STE && \

arch/m68k/include/asm/macintosh.h

@@ -19,6 +19,10 @@ extern void mac_init_IRQ(void);
 extern void mac_irq_enable(struct irq_data *data);
 extern void mac_irq_disable(struct irq_data *data);
 
+extern unsigned char mac_pram_read_byte(int);
+extern void mac_pram_write_byte(unsigned char, int);
+extern ssize_t mac_pram_get_size(void);
+
 /*
  *	Macintosh Table
  */

arch/m68k/kernel/setup_mm.c

@@ -24,6 +24,7 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/module.h>
+#include <linux/nvram.h>
 #include <linux/initrd.h>
 
 #include <asm/bootinfo.h>
@@ -37,13 +38,14 @@
 #ifdef CONFIG_AMIGA
 #include <asm/amigahw.h>
 #endif
-#ifdef CONFIG_ATARI
 #include <asm/atarihw.h>
+#ifdef CONFIG_ATARI
 #include <asm/atari_stram.h>
 #endif
 #ifdef CONFIG_SUN3X
 #include <asm/dvma.h>
 #endif
+#include <asm/macintosh.h>
 #include <asm/natfeat.h>
 
 #if !FPSTATESIZE || !NR_IRQS
@@ -547,3 +549,81 @@ static int __init adb_probe_sync_enable (char *str) {
 
 __setup("adb_sync", adb_probe_sync_enable);
 #endif /* CONFIG_ADB */
+
+#if IS_ENABLED(CONFIG_NVRAM)
+#ifdef CONFIG_MAC
+static unsigned char m68k_nvram_read_byte(int addr)
+{
+	if (MACH_IS_MAC)
+		return mac_pram_read_byte(addr);
+	return 0xff;
+}
+
+static void m68k_nvram_write_byte(unsigned char val, int addr)
+{
+	if (MACH_IS_MAC)
+		mac_pram_write_byte(val, addr);
+}
+#endif /* CONFIG_MAC */
+
+#ifdef CONFIG_ATARI
+static ssize_t m68k_nvram_read(char *buf, size_t count, loff_t *ppos)
+{
+	if (MACH_IS_ATARI)
+		return atari_nvram_read(buf, count, ppos);
+	else if (MACH_IS_MAC)
+		return nvram_read_bytes(buf, count, ppos);
+	return -EINVAL;
+}
+
+static ssize_t m68k_nvram_write(char *buf, size_t count, loff_t *ppos)
+{
+	if (MACH_IS_ATARI)
+		return atari_nvram_write(buf, count, ppos);
+	else if (MACH_IS_MAC)
+		return nvram_write_bytes(buf, count, ppos);
+	return -EINVAL;
+}
+
+static long m68k_nvram_set_checksum(void)
+{
+	if (MACH_IS_ATARI)
+		return atari_nvram_set_checksum();
+	return -EINVAL;
+}
+
+static long m68k_nvram_initialize(void)
+{
+	if (MACH_IS_ATARI)
+		return atari_nvram_initialize();
+	return -EINVAL;
+}
+#endif /* CONFIG_ATARI */
+
+static ssize_t m68k_nvram_get_size(void)
+{
+	if (MACH_IS_ATARI)
+		return atari_nvram_get_size();
+	else if (MACH_IS_MAC)
+		return mac_pram_get_size();
+	return -ENODEV;
+}
+
+/* Atari device drivers call .read (to get checksum validation) whereas
+ * Mac and PowerMac device drivers just use .read_byte.
+ */
+const struct nvram_ops arch_nvram_ops = {
+#ifdef CONFIG_MAC
+	.read_byte      = m68k_nvram_read_byte,
+	.write_byte     = m68k_nvram_write_byte,
+#endif
+#ifdef CONFIG_ATARI
+	.read           = m68k_nvram_read,
+	.write          = m68k_nvram_write,
+	.set_checksum   = m68k_nvram_set_checksum,
+	.initialize     = m68k_nvram_initialize,
+#endif
+	.get_size       = m68k_nvram_get_size,
+};
+EXPORT_SYMBOL(arch_nvram_ops);
+#endif /* CONFIG_NVRAM */

arch/m68k/mac/misc.c

@@ -36,8 +36,9 @@
 
 static void (*rom_reset)(void);
 
+#if IS_ENABLED(CONFIG_NVRAM)
 #ifdef CONFIG_ADB_CUDA
-static __u8 cuda_read_pram(int offset)
+static unsigned char cuda_pram_read_byte(int offset)
 {
 	struct adb_request req;
 
@@ -49,7 +50,7 @@ static __u8 cuda_read_pram(int offset)
 	return req.reply[3];
 }
 
-static void cuda_write_pram(int offset, __u8 data)
+static void cuda_pram_write_byte(unsigned char data, int offset)
 {
 	struct adb_request req;
 
@@ -62,29 +63,29 @@ static void cuda_write_pram(int offset, __u8 data)
 #endif /* CONFIG_ADB_CUDA */
 
 #ifdef CONFIG_ADB_PMU
-static __u8 pmu_read_pram(int offset)
+static unsigned char pmu_pram_read_byte(int offset)
 {
 	struct adb_request req;
 
-	if (pmu_request(&req, NULL, 3, PMU_READ_NVRAM,
+	if (pmu_request(&req, NULL, 3, PMU_READ_XPRAM,
-			(offset >> 8) & 0xFF, offset & 0xFF) < 0)
+	                offset & 0xFF, 1) < 0)
 		return 0;
-	while (!req.complete)
+	pmu_wait_complete(&req);
-		pmu_poll();
+
-	return req.reply[3];
+	return req.reply[0];
 }
 
-static void pmu_write_pram(int offset, __u8 data)
+static void pmu_pram_write_byte(unsigned char data, int offset)
 {
 	struct adb_request req;
 
-	if (pmu_request(&req, NULL, 4, PMU_WRITE_NVRAM,
+	if (pmu_request(&req, NULL, 4, PMU_WRITE_XPRAM,
-			(offset >> 8) & 0xFF, offset & 0xFF, data) < 0)
+	                offset & 0xFF, 1, data) < 0)
 		return;
-	while (!req.complete)
+	pmu_wait_complete(&req);
-		pmu_poll();
 }
 #endif /* CONFIG_ADB_PMU */
+#endif /* CONFIG_NVRAM */
 
 /*
  * VIA PRAM/RTC access routines
@@ -93,7 +94,7 @@ static void pmu_write_pram(int offset, __u8 data)
  * the RTC should be enabled.
  */
 
-static __u8 via_pram_readbyte(void)
+static __u8 via_rtc_recv(void)
 {
 	int i, reg;
 	__u8 data;
@@ -120,7 +121,7 @@ static __u8 via_pram_readbyte(void)
 	return data;
 }
 
-static void via_pram_writebyte(__u8 data)
+static void via_rtc_send(__u8 data)
 {
 	int i, reg, bit;
 
@@ -136,6 +137,31 @@ static void via_pram_writebyte(__u8 data)
 	}
 }
 
+/*
+ * These values can be found in Inside Macintosh vol. III ch. 2
+ * which has a description of the RTC chip in the original Mac.
+ */
+
+#define RTC_FLG_READ            BIT(7)
+#define RTC_FLG_WRITE_PROTECT   BIT(7)
+#define RTC_CMD_READ(r)         (RTC_FLG_READ | (r << 2))
+#define RTC_CMD_WRITE(r)        (r << 2)
+#define RTC_REG_SECONDS_0       0
+#define RTC_REG_SECONDS_1       1
+#define RTC_REG_SECONDS_2       2
+#define RTC_REG_SECONDS_3       3
+#define RTC_REG_WRITE_PROTECT   13
+
+/*
+ * Inside Mac has no information about two-byte RTC commands but
+ * the MAME/MESS source code has the essentials.
+ */
+
+#define RTC_REG_XPRAM           14
+#define RTC_CMD_XPRAM_READ      (RTC_CMD_READ(RTC_REG_XPRAM) << 8)
+#define RTC_CMD_XPRAM_WRITE     (RTC_CMD_WRITE(RTC_REG_XPRAM) << 8)
+#define RTC_CMD_XPRAM_ARG(a)    (((a & 0xE0) << 3) | ((a & 0x1F) << 2))
+
 /*
  * Execute a VIA PRAM/RTC command. For read commands
  * data should point to a one-byte buffer for the
@@ -145,29 +171,33 @@ static void via_pram_writebyte(__u8 data)
  * This function disables all interrupts while running.
  */
 
-static void via_pram_command(int command, __u8 *data)
+static void via_rtc_command(int command, __u8 *data)
 {
 	unsigned long flags;
 	int is_read;
 
 	local_irq_save(flags);
 
+	/* The least significant bits must be 0b01 according to Inside Mac */
+
+	command = (command & ~3) | 1;
+
 	/* Enable the RTC and make sure the strobe line is high */
 
 	via1[vBufB] = (via1[vBufB] | VIA1B_vRTCClk) & ~VIA1B_vRTCEnb;
 
 	if (command & 0xFF00) {		/* extended (two-byte) command */
-		via_pram_writebyte((command & 0xFF00) >> 8);
+		via_rtc_send((command & 0xFF00) >> 8);
-		via_pram_writebyte(command & 0xFF);
+		via_rtc_send(command & 0xFF);
-		is_read = command & 0x8000;
+		is_read = command & (RTC_FLG_READ << 8);
 	} else {			/* one-byte command */
-		via_pram_writebyte(command);
+		via_rtc_send(command);
-		is_read = command & 0x80;
+		is_read = command & RTC_FLG_READ;
 	}
 	if (is_read) {
-		*data = via_pram_readbyte();
+		*data = via_rtc_recv();
 	} else {
-		via_pram_writebyte(*data);
+		via_rtc_send(*data);
 	}
 
 	/* All done, disable the RTC */
@@ -177,14 +207,30 @@ static void via_pram_command(int command, __u8 *data)
 	local_irq_restore(flags);
 }
 
-static __u8 via_read_pram(int offset)
+#if IS_ENABLED(CONFIG_NVRAM)
+static unsigned char via_pram_read_byte(int offset)
 {
-	return 0;
+	unsigned char temp;
+
+	via_rtc_command(RTC_CMD_XPRAM_READ | RTC_CMD_XPRAM_ARG(offset), &temp);
+
+	return temp;
 }
 
-static void via_write_pram(int offset, __u8 data)
+static void via_pram_write_byte(unsigned char data, int offset)
 {
+	unsigned char temp;
+
+	temp = 0x55;
+	via_rtc_command(RTC_CMD_WRITE(RTC_REG_WRITE_PROTECT), &temp);
+
+	temp = data;
+	via_rtc_command(RTC_CMD_XPRAM_WRITE | RTC_CMD_XPRAM_ARG(offset), &temp);
+
+	temp = 0x55 | RTC_FLG_WRITE_PROTECT;
+	via_rtc_command(RTC_CMD_WRITE(RTC_REG_WRITE_PROTECT), &temp);
 }
+#endif /* CONFIG_NVRAM */
 
 /*
  * Return the current time in seconds since January 1, 1904.
@@ -201,10 +247,10 @@ static time64_t via_read_time(void)
 	} result, last_result;
 	int count = 1;
 
-	via_pram_command(0x81, &last_result.cdata[3]);
+	via_rtc_command(RTC_CMD_READ(RTC_REG_SECONDS_0), &last_result.cdata[3]);
-	via_pram_command(0x85, &last_result.cdata[2]);
+	via_rtc_command(RTC_CMD_READ(RTC_REG_SECONDS_1), &last_result.cdata[2]);
-	via_pram_command(0x89, &last_result.cdata[1]);
+	via_rtc_command(RTC_CMD_READ(RTC_REG_SECONDS_2), &last_result.cdata[1]);
-	via_pram_command(0x8D, &last_result.cdata[0]);
+	via_rtc_command(RTC_CMD_READ(RTC_REG_SECONDS_3), &last_result.cdata[0]);
 
 	/*
 	 * The NetBSD guys say to loop until you get the same reading
@@ -212,10 +258,14 @@ static time64_t via_read_time(void)
 	 */
 
 	while (1) {
-		via_pram_command(0x81, &result.cdata[3]);
+		via_rtc_command(RTC_CMD_READ(RTC_REG_SECONDS_0),
-		via_pram_command(0x85, &result.cdata[2]);
+		                &result.cdata[3]);
-		via_pram_command(0x89, &result.cdata[1]);
+		via_rtc_command(RTC_CMD_READ(RTC_REG_SECONDS_1),
-		via_pram_command(0x8D, &result.cdata[0]);
+		                &result.cdata[2]);
+		via_rtc_command(RTC_CMD_READ(RTC_REG_SECONDS_2),
+		                &result.cdata[1]);
+		via_rtc_command(RTC_CMD_READ(RTC_REG_SECONDS_3),
+		                &result.cdata[0]);
 
 		if (result.idata == last_result.idata)
 			return (time64_t)result.idata - RTC_OFFSET;
@@ -254,18 +304,18 @@ static void via_set_rtc_time(struct rtc_time *tm)
 	/* Clear the write protect bit */
 
 	temp = 0x55;
-	via_pram_command(0x35, &temp);
+	via_rtc_command(RTC_CMD_WRITE(RTC_REG_WRITE_PROTECT), &temp);
 
 	data.idata = lower_32_bits(time + RTC_OFFSET);
-	via_pram_command(0x01, &data.cdata[3]);
+	via_rtc_command(RTC_CMD_WRITE(RTC_REG_SECONDS_0), &data.cdata[3]);
-	via_pram_command(0x05, &data.cdata[2]);
+	via_rtc_command(RTC_CMD_WRITE(RTC_REG_SECONDS_1), &data.cdata[2]);
-	via_pram_command(0x09, &data.cdata[1]);
+	via_rtc_command(RTC_CMD_WRITE(RTC_REG_SECONDS_2), &data.cdata[1]);
-	via_pram_command(0x0D, &data.cdata[0]);
+	via_rtc_command(RTC_CMD_WRITE(RTC_REG_SECONDS_3), &data.cdata[0]);
 
 	/* Set the write protect bit */
 
-	temp = 0xD5;
+	temp = 0x55 | RTC_FLG_WRITE_PROTECT;
-	via_pram_command(0x35, &temp);
+	via_rtc_command(RTC_CMD_WRITE(RTC_REG_WRITE_PROTECT), &temp);
 }
 
 static void via_shutdown(void)
@@ -326,66 +376,58 @@ static void cuda_shutdown(void)
  *-------------------------------------------------------------------
  */
 
-void mac_pram_read(int offset, __u8 *buffer, int len)
+#if IS_ENABLED(CONFIG_NVRAM)
+unsigned char mac_pram_read_byte(int addr)
 {
-	__u8 (*func)(int);
-	int i;
-
 	switch (macintosh_config->adb_type) {
 	case MAC_ADB_IOP:
 	case MAC_ADB_II:
 	case MAC_ADB_PB1:
-		func = via_read_pram;
+		return via_pram_read_byte(addr);
-		break;
 #ifdef CONFIG_ADB_CUDA
 	case MAC_ADB_EGRET:
 	case MAC_ADB_CUDA:
-		func = cuda_read_pram;
+		return cuda_pram_read_byte(addr);
-		break;
 #endif
 #ifdef CONFIG_ADB_PMU
 	case MAC_ADB_PB2:
-		func = pmu_read_pram;
+		return pmu_pram_read_byte(addr);
-		break;
 #endif
 	default:
-		return;
+		return 0xFF;
-	}
-	for (i = 0 ; i < len ; i++) {
-		buffer[i] = (*func)(offset++);
 	}
 }
 
-void mac_pram_write(int offset, __u8 *buffer, int len)
+void mac_pram_write_byte(unsigned char val, int addr)
 {
-	void (*func)(int, __u8);
-	int i;
-
 	switch (macintosh_config->adb_type) {
 	case MAC_ADB_IOP:
 	case MAC_ADB_II:
 	case MAC_ADB_PB1:
-		func = via_write_pram;
+		via_pram_write_byte(val, addr);
 		break;
 #ifdef CONFIG_ADB_CUDA
 	case MAC_ADB_EGRET:
 	case MAC_ADB_CUDA:
-		func = cuda_write_pram;
+		cuda_pram_write_byte(val, addr);
 		break;
 #endif
 #ifdef CONFIG_ADB_PMU
 	case MAC_ADB_PB2:
-		func = pmu_write_pram;
+		pmu_pram_write_byte(val, addr);
 		break;
 #endif
 	default:
-		return;
+		break;
-	}
-	for (i = 0 ; i < len ; i++) {
-		(*func)(offset++, buffer[i]);
 	}
 }
 
+ssize_t mac_pram_get_size(void)
+{
+	return 256;
+}
+#endif /* CONFIG_NVRAM */
+
 void mac_poweroff(void)
 {
 	if (oss_present) {

arch/parisc/include/asm/io.h

@@ -311,6 +311,15 @@ extern void outsl (unsigned long port, const void *src, unsigned long count);
  * value for either 32 or 64 bit mode */
 #define F_EXTEND(x) ((unsigned long)((x) | (0xffffffff00000000ULL)))
 
+#define ioread64 ioread64
+#define ioread64be ioread64be
+#define iowrite64 iowrite64
+#define iowrite64be iowrite64be
+extern u64 ioread64(void __iomem *addr);
+extern u64 ioread64be(void __iomem *addr);
+extern void iowrite64(u64 val, void __iomem *addr);
+extern void iowrite64be(u64 val, void __iomem *addr);
+
 #include <asm-generic/iomap.h>
 
 /*

arch/parisc/lib/iomap.c

@@ -48,11 +48,15 @@ struct iomap_ops {
 	unsigned int (*read16be)(void __iomem *);
 	unsigned int (*read32)(void __iomem *);
 	unsigned int (*read32be)(void __iomem *);
+	u64 (*read64)(void __iomem *);
+	u64 (*read64be)(void __iomem *);
 	void (*write8)(u8, void __iomem *);
 	void (*write16)(u16, void __iomem *);
 	void (*write16be)(u16, void __iomem *);
 	void (*write32)(u32, void __iomem *);
 	void (*write32be)(u32, void __iomem *);
+	void (*write64)(u64, void __iomem *);
+	void (*write64be)(u64, void __iomem *);
 	void (*read8r)(void __iomem *, void *, unsigned long);
 	void (*read16r)(void __iomem *, void *, unsigned long);
 	void (*read32r)(void __iomem *, void *, unsigned long);
@@ -171,6 +175,16 @@ static unsigned int iomem_read32be(void __iomem *addr)
 	return __raw_readl(addr);
 }
 
+static u64 iomem_read64(void __iomem *addr)
+{
+	return readq(addr);
+}
+
+static u64 iomem_read64be(void __iomem *addr)
+{
+	return __raw_readq(addr);
+}
+
 static void iomem_write8(u8 datum, void __iomem *addr)
 {
 	writeb(datum, addr);
@@ -196,6 +210,16 @@ static void iomem_write32be(u32 datum, void __iomem *addr)
 	__raw_writel(datum, addr);
 }
 
+static void iomem_write64(u64 datum, void __iomem *addr)
+{
+	writel(datum, addr);
+}
+
+static void iomem_write64be(u64 datum, void __iomem *addr)
+{
+	__raw_writel(datum, addr);
+}
+
 static void iomem_read8r(void __iomem *addr, void *dst, unsigned long count)
 {
 	while (count--) {
@@ -250,11 +274,15 @@ static const struct iomap_ops iomem_ops = {
 	.read16be = iomem_read16be,
 	.read32 = iomem_read32,
 	.read32be = iomem_read32be,
+	.read64 = iomem_read64,
+	.read64be = iomem_read64be,
 	.write8 = iomem_write8,
 	.write16 = iomem_write16,
 	.write16be = iomem_write16be,
 	.write32 = iomem_write32,
 	.write32be = iomem_write32be,
+	.write64 = iomem_write64,
+	.write64be = iomem_write64be,
 	.read8r = iomem_read8r,
 	.read16r = iomem_read16r,
 	.read32r = iomem_read32r,
@@ -304,6 +332,20 @@ unsigned int ioread32be(void __iomem *addr)
 	return *((u32 *)addr);
 }
 
+u64 ioread64(void __iomem *addr)
+{
+	if (unlikely(INDIRECT_ADDR(addr)))
+		return iomap_ops[ADDR_TO_REGION(addr)]->read64(addr);
+	return le64_to_cpup((u64 *)addr);
+}
+
+u64 ioread64be(void __iomem *addr)
+{
+	if (unlikely(INDIRECT_ADDR(addr)))
+		return iomap_ops[ADDR_TO_REGION(addr)]->read64be(addr);
+	return *((u64 *)addr);
+}
+
 void iowrite8(u8 datum, void __iomem *addr)
 {
 	if (unlikely(INDIRECT_ADDR(addr))) {
@@ -349,6 +391,24 @@ void iowrite32be(u32 datum, void __iomem *addr)
 	}
 }
 
+void iowrite64(u64 datum, void __iomem *addr)
+{
+	if (unlikely(INDIRECT_ADDR(addr))) {
+		iomap_ops[ADDR_TO_REGION(addr)]->write64(datum, addr);
+	} else {
+		*((u64 *)addr) = cpu_to_le64(datum);
+	}
+}
+
+void iowrite64be(u64 datum, void __iomem *addr)
+{
+	if (unlikely(INDIRECT_ADDR(addr))) {
+		iomap_ops[ADDR_TO_REGION(addr)]->write64be(datum, addr);
+	} else {
+		*((u64 *)addr) = datum;
+	}
+}
+
 /* Repeating interfaces */
 
 void ioread8_rep(void __iomem *addr, void *dst, unsigned long count)
@@ -449,11 +509,15 @@ EXPORT_SYMBOL(ioread16);
 EXPORT_SYMBOL(ioread16be);
 EXPORT_SYMBOL(ioread32);
 EXPORT_SYMBOL(ioread32be);
+EXPORT_SYMBOL(ioread64);
+EXPORT_SYMBOL(ioread64be);
 EXPORT_SYMBOL(iowrite8);
 EXPORT_SYMBOL(iowrite16);
 EXPORT_SYMBOL(iowrite16be);
 EXPORT_SYMBOL(iowrite32);
 EXPORT_SYMBOL(iowrite32be);
+EXPORT_SYMBOL(iowrite64);
+EXPORT_SYMBOL(iowrite64be);
 EXPORT_SYMBOL(ioread8_rep);
 EXPORT_SYMBOL(ioread16_rep);
 EXPORT_SYMBOL(ioread32_rep);

arch/powerpc/Kconfig

@@ -179,6 +179,7 @@ config PPC
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_MMAP_RND_BITS
 	select HAVE_ARCH_MMAP_RND_COMPAT_BITS	if COMPAT
+	select HAVE_ARCH_NVRAM_OPS
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_CBPF_JIT			if !PPC64
@@ -275,11 +276,6 @@ config SYSVIPC_COMPAT
 	depends on COMPAT && SYSVIPC
 	default y
 
-# All PPC32s use generic nvram driver through ppc_md
-config GENERIC_NVRAM
-	bool
-	default y if PPC32
-
 config SCHED_OMIT_FRAME_POINTER
 	bool
 	default y

arch/powerpc/include/asm/io.h

@@ -783,8 +783,10 @@ extern void __iounmap_at(void *ea, unsigned long size);
 
 #define mmio_read16be(addr)		readw_be(addr)
 #define mmio_read32be(addr)		readl_be(addr)
+#define mmio_read64be(addr)		readq_be(addr)
 #define mmio_write16be(val, addr)	writew_be(val, addr)
 #define mmio_write32be(val, addr)	writel_be(val, addr)
+#define mmio_write64be(val, addr)	writeq_be(val, addr)
 #define mmio_insb(addr, dst, count)	readsb(addr, dst, count)
 #define mmio_insw(addr, dst, count)	readsw(addr, dst, count)
 #define mmio_insl(addr, dst, count)	readsl(addr, dst, count)

arch/powerpc/include/asm/nvram.h

@@ -78,9 +78,6 @@ extern int	pmac_get_partition(int partition);
 extern u8	pmac_xpram_read(int xpaddr);
 extern void	pmac_xpram_write(int xpaddr, u8 data);
 
-/* Synchronize NVRAM */
-extern void	nvram_sync(void);
-
 /* Initialize NVRAM OS partition */
 extern int __init nvram_init_os_partition(struct nvram_os_partition *part);
 
@@ -98,10 +95,4 @@ extern int nvram_write_os_partition(struct nvram_os_partition *part,
 				    unsigned int err_type,
 				    unsigned int error_log_cnt);
 
-/* Determine NVRAM size */
-extern ssize_t nvram_get_size(void);
-
-/* Normal access to NVRAM */
-extern unsigned char nvram_read_byte(int i);
-extern void nvram_write_byte(unsigned char c, int i);
 #endif /* _ASM_POWERPC_NVRAM_H */

arch/powerpc/kernel/nvram_64.c

@@ -7,12 +7,6 @@
  *      2 of the License, or (at your option) any later version.
  *
  * /dev/nvram driver for PPC64
- *
- * This perhaps should live in drivers/char
- *
- * TODO: Split the /dev/nvram part (that one can use
- *       drivers/char/generic_nvram.c) from the arch & partition
- *       parsing code.
  */
 
 #include <linux/types.h>
@@ -714,137 +708,6 @@ static void oops_to_nvram(struct kmsg_dumper *dumper,
 	spin_unlock_irqrestore(&lock, flags);
 }
 
-static loff_t dev_nvram_llseek(struct file *file, loff_t offset, int origin)
-{
-	if (ppc_md.nvram_size == NULL)
-		return -ENODEV;
-	return generic_file_llseek_size(file, offset, origin, MAX_LFS_FILESIZE,
-					ppc_md.nvram_size());
-}
-
-
-static ssize_t dev_nvram_read(struct file *file, char __user *buf,
-			  size_t count, loff_t *ppos)
-{
-	ssize_t ret;
-	char *tmp = NULL;
-	ssize_t size;
-
-	if (!ppc_md.nvram_size) {
-		ret = -ENODEV;
-		goto out;
-	}
-
-	size = ppc_md.nvram_size();
-	if (size < 0) {
-		ret = size;
-		goto out;
-	}
-
-	if (*ppos >= size) {
-		ret = 0;
-		goto out;
-	}
-
-	count = min_t(size_t, count, size - *ppos);
-	count = min(count, PAGE_SIZE);
-
-	tmp = kmalloc(count, GFP_KERNEL);
-	if (!tmp) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	ret = ppc_md.nvram_read(tmp, count, ppos);
-	if (ret <= 0)
-		goto out;
-
-	if (copy_to_user(buf, tmp, ret))
-		ret = -EFAULT;
-
-out:
-	kfree(tmp);
-	return ret;
-
-}
-
-static ssize_t dev_nvram_write(struct file *file, const char __user *buf,
-			  size_t count, loff_t *ppos)
-{
-	ssize_t ret;
-	char *tmp = NULL;
-	ssize_t size;
-
-	ret = -ENODEV;
-	if (!ppc_md.nvram_size)
-		goto out;
-
-	ret = 0;
-	size = ppc_md.nvram_size();
-	if (*ppos >= size || size < 0)
-		goto out;
-
-	count = min_t(size_t, count, size - *ppos);
-	count = min(count, PAGE_SIZE);
-
-	tmp = memdup_user(buf, count);
-	if (IS_ERR(tmp)) {
-		ret = PTR_ERR(tmp);
-		goto out;
-	}
-
-	ret = ppc_md.nvram_write(tmp, count, ppos);
-
-	kfree(tmp);
-out:
-	return ret;
-}
-
-static long dev_nvram_ioctl(struct file *file, unsigned int cmd,
-			    unsigned long arg)
-{
-	switch(cmd) {
-#ifdef CONFIG_PPC_PMAC
-	case OBSOLETE_PMAC_NVRAM_GET_OFFSET:
-		printk(KERN_WARNING "nvram: Using obsolete PMAC_NVRAM_GET_OFFSET ioctl\n");
-		/* fall through */
-	case IOC_NVRAM_GET_OFFSET: {
-		int part, offset;
-
-		if (!machine_is(powermac))
-			return -EINVAL;
-		if (copy_from_user(&part, (void __user*)arg, sizeof(part)) != 0)
-			return -EFAULT;
-		if (part < pmac_nvram_OF || part > pmac_nvram_NR)
-			return -EINVAL;
-		offset = pmac_get_partition(part);
-		if (offset < 0)
-			return offset;
-		if (copy_to_user((void __user*)arg, &offset, sizeof(offset)) != 0)
-			return -EFAULT;
-		return 0;
-	}
-#endif /* CONFIG_PPC_PMAC */
-	default:
-		return -EINVAL;
-	}
-}
-
-static const struct file_operations nvram_fops = {
-	.owner		= THIS_MODULE,
-	.llseek		= dev_nvram_llseek,
-	.read		= dev_nvram_read,
-	.write		= dev_nvram_write,
-	.unlocked_ioctl	= dev_nvram_ioctl,
-};
-
-static struct miscdevice nvram_dev = {
-	NVRAM_MINOR,
-	"nvram",
-	&nvram_fops
-};
-
-
 #ifdef DEBUG_NVRAM
 static void __init nvram_print_partitions(char * label)
 {
@@ -992,6 +855,8 @@ loff_t __init nvram_create_partition(const char *name, int sig,
 	long size = 0;
 	int rc;
 
+	BUILD_BUG_ON(NVRAM_BLOCK_LEN != 16);
+
 	/* Convert sizes from bytes to blocks */
 	req_size = _ALIGN_UP(req_size, NVRAM_BLOCK_LEN) / NVRAM_BLOCK_LEN;
 	min_size = _ALIGN_UP(min_size, NVRAM_BLOCK_LEN) / NVRAM_BLOCK_LEN;
@@ -1192,22 +1057,3 @@ int __init nvram_scan_partitions(void)
 	kfree(header);
 	return err;
 }
-
-static int __init nvram_init(void)
-{
-	int rc;
-	
-	BUILD_BUG_ON(NVRAM_BLOCK_LEN != 16);
-
-	if (ppc_md.nvram_size == NULL || ppc_md.nvram_size() <= 0)
-		return  -ENODEV;
-
-  	rc = misc_register(&nvram_dev);
-	if (rc != 0) {
-		printk(KERN_ERR "nvram_init: failed to register device\n");
-		return rc;
-	}
-  	
-  	return rc;
-}
-device_initcall(nvram_init);

arch/powerpc/kernel/setup_32.c

@@ -17,6 +17,7 @@
 #include <linux/console.h>
 #include <linux/memblock.h>
 #include <linux/export.h>
+#include <linux/nvram.h>
 
 #include <asm/io.h>
 #include <asm/prom.h>
@@ -147,41 +148,6 @@ static int __init ppc_setup_l3cr(char *str)
 }
 __setup("l3cr=", ppc_setup_l3cr);
 
-#ifdef CONFIG_GENERIC_NVRAM
-
-/* Generic nvram hooks used by drivers/char/gen_nvram.c */
-unsigned char nvram_read_byte(int addr)
-{
-	if (ppc_md.nvram_read_val)
-		return ppc_md.nvram_read_val(addr);
-	return 0xff;
-}
-EXPORT_SYMBOL(nvram_read_byte);
-
-void nvram_write_byte(unsigned char val, int addr)
-{
-	if (ppc_md.nvram_write_val)
-		ppc_md.nvram_write_val(addr, val);
-}
-EXPORT_SYMBOL(nvram_write_byte);
-
-ssize_t nvram_get_size(void)
-{
-	if (ppc_md.nvram_size)
-		return ppc_md.nvram_size();
-	return -1;
-}
-EXPORT_SYMBOL(nvram_get_size);
-
-void nvram_sync(void)
-{
-	if (ppc_md.nvram_sync)
-		ppc_md.nvram_sync();
-}
-EXPORT_SYMBOL(nvram_sync);
-
-#endif /* CONFIG_NVRAM */
-
 static int __init ppc_init(void)
 {
 	/* clear the progress line */

arch/powerpc/platforms/chrp/Makefile

@@ -1,3 +1,3 @@
 obj-y				+= setup.o time.o pegasos_eth.o pci.o
 obj-$(CONFIG_SMP)		+= smp.o
-obj-$(CONFIG_NVRAM)		+= nvram.o
+obj-$(CONFIG_NVRAM:m=y)		+= nvram.o

arch/powerpc/platforms/chrp/nvram.c

@@ -24,7 +24,7 @@ static unsigned int nvram_size;
 static unsigned char nvram_buf[4];
 static DEFINE_SPINLOCK(nvram_lock);
 
-static unsigned char chrp_nvram_read(int addr)
+static unsigned char chrp_nvram_read_val(int addr)
 {
 	unsigned int done;
 	unsigned long flags;
@@ -46,7 +46,7 @@ static unsigned char chrp_nvram_read(int addr)
 	return ret;
 }
 
-static void chrp_nvram_write(int addr, unsigned char val)
+static void chrp_nvram_write_val(int addr, unsigned char val)
 {
 	unsigned int done;
 	unsigned long flags;
@@ -64,6 +64,11 @@ static void chrp_nvram_write(int addr, unsigned char val)
 	spin_unlock_irqrestore(&nvram_lock, flags);
 }
 
+static ssize_t chrp_nvram_size(void)
+{
+	return nvram_size;
+}
+
 void __init chrp_nvram_init(void)
 {
 	struct device_node *nvram;
@@ -85,8 +90,9 @@ void __init chrp_nvram_init(void)
 	printk(KERN_INFO "CHRP nvram contains %u bytes\n", nvram_size);
 	of_node_put(nvram);
 
-	ppc_md.nvram_read_val = chrp_nvram_read;
+	ppc_md.nvram_read_val  = chrp_nvram_read_val;
-	ppc_md.nvram_write_val = chrp_nvram_write;
+	ppc_md.nvram_write_val = chrp_nvram_write_val;
+	ppc_md.nvram_size      = chrp_nvram_size;
 
 	return;
 }

arch/powerpc/platforms/chrp/setup.c

@@ -549,7 +549,7 @@ static void __init chrp_init_IRQ(void)
 static void __init
 chrp_init2(void)
 {
-#ifdef CONFIG_NVRAM
+#if IS_ENABLED(CONFIG_NVRAM)
 	chrp_nvram_init();
 #endif
 

arch/powerpc/platforms/powermac/Makefile

@@ -15,7 +15,5 @@ obj-$(CONFIG_PMAC_BACKLIGHT)	+= backlight.o
 # need this to be a bool.  Cheat here and pretend CONFIG_NVRAM=m is really
 # CONFIG_NVRAM=y
 obj-$(CONFIG_NVRAM:m=y)		+= nvram.o
-# ppc64 pmac doesn't define CONFIG_NVRAM but needs nvram stuff
-obj-$(CONFIG_PPC64)		+= nvram.o
 obj-$(CONFIG_PPC32)		+= bootx_init.o
 obj-$(CONFIG_SMP)		+= smp.o

arch/powerpc/platforms/powermac/nvram.c

@@ -147,6 +147,11 @@ static ssize_t core99_nvram_size(void)
 static volatile unsigned char __iomem *nvram_addr;
 static int nvram_mult;
 
+static ssize_t ppc32_nvram_size(void)
+{
+	return NVRAM_SIZE;
+}
+
 static unsigned char direct_nvram_read_byte(int addr)
 {
 	return in_8(&nvram_data[(addr & (NVRAM_SIZE - 1)) * nvram_mult]);
@@ -590,21 +595,25 @@ int __init pmac_nvram_init(void)
 		nvram_mult = 1;
 		ppc_md.nvram_read_val	= direct_nvram_read_byte;
 		ppc_md.nvram_write_val	= direct_nvram_write_byte;
+		ppc_md.nvram_size	= ppc32_nvram_size;
 	} else if (nvram_naddrs == 1) {
 		nvram_data = ioremap(r1.start, s1);
 		nvram_mult = (s1 + NVRAM_SIZE - 1) / NVRAM_SIZE;
 		ppc_md.nvram_read_val	= direct_nvram_read_byte;
 		ppc_md.nvram_write_val	= direct_nvram_write_byte;
+		ppc_md.nvram_size	= ppc32_nvram_size;
 	} else if (nvram_naddrs == 2) {
 		nvram_addr = ioremap(r1.start, s1);
 		nvram_data = ioremap(r2.start, s2);
 		ppc_md.nvram_read_val	= indirect_nvram_read_byte;
 		ppc_md.nvram_write_val	= indirect_nvram_write_byte;
+		ppc_md.nvram_size	= ppc32_nvram_size;
 	} else if (nvram_naddrs == 0 && sys_ctrler == SYS_CTRLER_PMU) {
 #ifdef CONFIG_ADB_PMU
 		nvram_naddrs = -1;
 		ppc_md.nvram_read_val	= pmu_nvram_read_byte;
 		ppc_md.nvram_write_val	= pmu_nvram_write_byte;
+		ppc_md.nvram_size	= ppc32_nvram_size;
 #endif /* CONFIG_ADB_PMU */
 	} else {
 		printk(KERN_ERR "Incompatible type of NVRAM\n");

arch/powerpc/platforms/powermac/setup.c

@@ -316,8 +316,7 @@ static void __init pmac_setup_arch(void)
 	find_via_pmu();
 	smu_init();
 
-#if defined(CONFIG_NVRAM) || defined(CONFIG_NVRAM_MODULE) || \
+#if IS_ENABLED(CONFIG_NVRAM)
-    defined(CONFIG_PPC64)
 	pmac_nvram_init();
 #endif
 #ifdef CONFIG_PPC32

arch/powerpc/platforms/powermac/time.c

@@ -68,7 +68,7 @@
 long __init pmac_time_init(void)
 {
 	s32 delta = 0;
-#ifdef CONFIG_NVRAM
+#if defined(CONFIG_NVRAM) && defined(CONFIG_PPC32)
 	int dst;
 	
 	delta = ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x9)) << 16;

arch/powerpc/platforms/pseries/nvram.c

@@ -7,8 +7,6 @@
  *      2 of the License, or (at your option) any later version.
  *
  * /dev/nvram driver for PPC64
- *
- * This perhaps should live in drivers/char
  */
 
 

drivers/Kconfig

@@ -228,4 +228,6 @@ source "drivers/siox/Kconfig"
 
 source "drivers/slimbus/Kconfig"
 
+source "drivers/interconnect/Kconfig"
+
 endmenu

drivers/Makefile

@@ -186,3 +186,4 @@ obj-$(CONFIG_MULTIPLEXER)	+= mux/
 obj-$(CONFIG_UNISYS_VISORBUS)	+= visorbus/
 obj-$(CONFIG_SIOX)		+= siox/
 obj-$(CONFIG_GNSS)		+= gnss/
+obj-$(CONFIG_INTERCONNECT)	+= interconnect/

drivers/android/Kconfig

@@ -10,7 +10,7 @@ if ANDROID
 
 config ANDROID_BINDER_IPC
 	bool "Android Binder IPC Driver"
-	depends on MMU && !CPU_CACHE_VIVT
+	depends on MMU
 	default n
 	---help---
 	  Binder is used in Android for both communication between processes,

drivers/android/binder_alloc.c

@@ -29,6 +29,8 @@
 #include <linux/list_lru.h>
 #include <linux/ratelimit.h>
 #include <asm/cacheflush.h>
+#include <linux/uaccess.h>
+#include <linux/highmem.h>
 #include "binder_alloc.h"
 #include "binder_trace.h"
 
@@ -67,9 +69,8 @@ static size_t binder_alloc_buffer_size(struct binder_alloc *alloc,
 				       struct binder_buffer *buffer)
 {
 	if (list_is_last(&buffer->entry, &alloc->buffers))
-		return (u8 *)alloc->buffer +
+		return alloc->buffer + alloc->buffer_size - buffer->user_data;
-			alloc->buffer_size - (u8 *)buffer->data;
+	return binder_buffer_next(buffer)->user_data - buffer->user_data;
-	return (u8 *)binder_buffer_next(buffer)->data - (u8 *)buffer->data;
 }
 
 static void binder_insert_free_buffer(struct binder_alloc *alloc,
@@ -119,9 +120,9 @@ static void binder_insert_allocated_buffer_locked(
 		buffer = rb_entry(parent, struct binder_buffer, rb_node);
 		BUG_ON(buffer->free);
 
-		if (new_buffer->data < buffer->data)
+		if (new_buffer->user_data < buffer->user_data)
 			p = &parent->rb_left;
-		else if (new_buffer->data > buffer->data)
+		else if (new_buffer->user_data > buffer->user_data)
 			p = &parent->rb_right;
 		else
 			BUG();
@@ -136,17 +137,17 @@ static struct binder_buffer *binder_alloc_prepare_to_free_locked(
 {
 	struct rb_node *n = alloc->allocated_buffers.rb_node;
 	struct binder_buffer *buffer;
-	void *kern_ptr;
+	void __user *uptr;
 
-	kern_ptr = (void *)(user_ptr - alloc->user_buffer_offset);
+	uptr = (void __user *)user_ptr;
 
 	while (n) {
 		buffer = rb_entry(n, struct binder_buffer, rb_node);
 		BUG_ON(buffer->free);
 
-		if (kern_ptr < buffer->data)
+		if (uptr < buffer->user_data)
 			n = n->rb_left;
-		else if (kern_ptr > buffer->data)
+		else if (uptr > buffer->user_data)
 			n = n->rb_right;
 		else {
 			/*
@@ -186,9 +187,9 @@ struct binder_buffer *binder_alloc_prepare_to_free(struct binder_alloc *alloc,
 }
 
 static int binder_update_page_range(struct binder_alloc *alloc, int allocate,
-				    void *start, void *end)
+				    void __user *start, void __user *end)
 {
-	void *page_addr;
+	void __user *page_addr;
 	unsigned long user_page_addr;
 	struct binder_lru_page *page;
 	struct vm_area_struct *vma = NULL;
@@ -263,18 +264,7 @@ static int binder_update_page_range(struct binder_alloc *alloc, int allocate,
 		page->alloc = alloc;
 		INIT_LIST_HEAD(&page->lru);
 
-		ret = map_kernel_range_noflush((unsigned long)page_addr,
+		user_page_addr = (uintptr_t)page_addr;
-					       PAGE_SIZE, PAGE_KERNEL,
-					       &page->page_ptr);
-		flush_cache_vmap((unsigned long)page_addr,
-				(unsigned long)page_addr + PAGE_SIZE);
-		if (ret != 1) {
-			pr_err("%d: binder_alloc_buf failed to map page at %pK in kernel\n",
-			       alloc->pid, page_addr);
-			goto err_map_kernel_failed;
-		}
-		user_page_addr =
-			(uintptr_t)page_addr + alloc->user_buffer_offset;
 		ret = vm_insert_page(vma, user_page_addr, page[0].page_ptr);
 		if (ret) {
 			pr_err("%d: binder_alloc_buf failed to map page at %lx in userspace\n",
@@ -312,8 +302,6 @@ free_range:
 		continue;
 
 err_vm_insert_page_failed:
-		unmap_kernel_range((unsigned long)page_addr, PAGE_SIZE);
-err_map_kernel_failed:
 		__free_page(page->page_ptr);
 		page->page_ptr = NULL;
 err_alloc_page_failed:
@@ -368,8 +356,8 @@ static struct binder_buffer *binder_alloc_new_buf_locked(
 	struct binder_buffer *buffer;
 	size_t buffer_size;
 	struct rb_node *best_fit = NULL;
-	void *has_page_addr;
+	void __user *has_page_addr;
-	void *end_page_addr;
+	void __user *end_page_addr;
 	size_t size, data_offsets_size;
 	int ret;
 
@@ -467,15 +455,15 @@ static struct binder_buffer *binder_alloc_new_buf_locked(
 		     "%d: binder_alloc_buf size %zd got buffer %pK size %zd\n",
 		      alloc->pid, size, buffer, buffer_size);
 
-	has_page_addr =
+	has_page_addr = (void __user *)
-		(void *)(((uintptr_t)buffer->data + buffer_size) & PAGE_MASK);
+		(((uintptr_t)buffer->user_data + buffer_size) & PAGE_MASK);
 	WARN_ON(n && buffer_size != size);
 	end_page_addr =
-		(void *)PAGE_ALIGN((uintptr_t)buffer->data + size);
+		(void __user *)PAGE_ALIGN((uintptr_t)buffer->user_data + size);
 	if (end_page_addr > has_page_addr)
 		end_page_addr = has_page_addr;
-	ret = binder_update_page_range(alloc, 1,
+	ret = binder_update_page_range(alloc, 1, (void __user *)
-	    (void *)PAGE_ALIGN((uintptr_t)buffer->data), end_page_addr);
+		PAGE_ALIGN((uintptr_t)buffer->user_data), end_page_addr);
 	if (ret)
 		return ERR_PTR(ret);
 
@@ -488,7 +476,7 @@ static struct binder_buffer *binder_alloc_new_buf_locked(
 			       __func__, alloc->pid);
 			goto err_alloc_buf_struct_failed;
 		}
-		new_buffer->data = (u8 *)buffer->data + size;
+		new_buffer->user_data = (u8 __user *)buffer->user_data + size;
 		list_add(&new_buffer->entry, &buffer->entry);
 		new_buffer->free = 1;
 		binder_insert_free_buffer(alloc, new_buffer);
@@ -514,8 +502,8 @@ static struct binder_buffer *binder_alloc_new_buf_locked(
 	return buffer;
 
 err_alloc_buf_struct_failed:
-	binder_update_page_range(alloc, 0,
+	binder_update_page_range(alloc, 0, (void __user *)
-				 (void *)PAGE_ALIGN((uintptr_t)buffer->data),
+				 PAGE_ALIGN((uintptr_t)buffer->user_data),
 				 end_page_addr);
 	return ERR_PTR(-ENOMEM);
 }
@@ -550,14 +538,15 @@ struct binder_buffer *binder_alloc_new_buf(struct binder_alloc *alloc,
 	return buffer;
 }
 
-static void *buffer_start_page(struct binder_buffer *buffer)
+static void __user *buffer_start_page(struct binder_buffer *buffer)
 {
-	return (void *)((uintptr_t)buffer->data & PAGE_MASK);
+	return (void __user *)((uintptr_t)buffer->user_data & PAGE_MASK);
 }
 
-static void *prev_buffer_end_page(struct binder_buffer *buffer)
+static void __user *prev_buffer_end_page(struct binder_buffer *buffer)
 {
-	return (void *)(((uintptr_t)(buffer->data) - 1) & PAGE_MASK);
+	return (void __user *)
+		(((uintptr_t)(buffer->user_data) - 1) & PAGE_MASK);
 }
 
 static void binder_delete_free_buffer(struct binder_alloc *alloc,
@@ -572,7 +561,8 @@ static void binder_delete_free_buffer(struct binder_alloc *alloc,
 		to_free = false;
 		binder_alloc_debug(BINDER_DEBUG_BUFFER_ALLOC,
 				   "%d: merge free, buffer %pK share page with %pK\n",
-				   alloc->pid, buffer->data, prev->data);
+				   alloc->pid, buffer->user_data,
+				   prev->user_data);
 	}
 
 	if (!list_is_last(&buffer->entry, &alloc->buffers)) {
@@ -582,23 +572,24 @@ static void binder_delete_free_buffer(struct binder_alloc *alloc,
 			binder_alloc_debug(BINDER_DEBUG_BUFFER_ALLOC,
 					   "%d: merge free, buffer %pK share page with %pK\n",
 					   alloc->pid,
-					   buffer->data,
+					   buffer->user_data,
-					   next->data);
+					   next->user_data);
 		}
 	}
 
-	if (PAGE_ALIGNED(buffer->data)) {
+	if (PAGE_ALIGNED(buffer->user_data)) {
 		binder_alloc_debug(BINDER_DEBUG_BUFFER_ALLOC,
 				   "%d: merge free, buffer start %pK is page aligned\n",
-				   alloc->pid, buffer->data);
+				   alloc->pid, buffer->user_data);
 		to_free = false;
 	}
 
 	if (to_free) {
 		binder_alloc_debug(BINDER_DEBUG_BUFFER_ALLOC,
 				   "%d: merge free, buffer %pK do not share page with %pK or %pK\n",
-				   alloc->pid, buffer->data,
+				   alloc->pid, buffer->user_data,
-				   prev->data, next ? next->data : NULL);
+				   prev->user_data,
+				   next ? next->user_data : NULL);
 		binder_update_page_range(alloc, 0, buffer_start_page(buffer),
 					 buffer_start_page(buffer) + PAGE_SIZE);
 	}
@@ -624,8 +615,8 @@ static void binder_free_buf_locked(struct binder_alloc *alloc,
 	BUG_ON(buffer->free);
 	BUG_ON(size > buffer_size);
 	BUG_ON(buffer->transaction != NULL);
-	BUG_ON(buffer->data < alloc->buffer);
+	BUG_ON(buffer->user_data < alloc->buffer);
-	BUG_ON(buffer->data > alloc->buffer + alloc->buffer_size);
+	BUG_ON(buffer->user_data > alloc->buffer + alloc->buffer_size);
 
 	if (buffer->async_transaction) {
 		alloc->free_async_space += size + sizeof(struct binder_buffer);
@@ -636,8 +627,9 @@ static void binder_free_buf_locked(struct binder_alloc *alloc,
 	}
 
 	binder_update_page_range(alloc, 0,
-		(void *)PAGE_ALIGN((uintptr_t)buffer->data),
+		(void __user *)PAGE_ALIGN((uintptr_t)buffer->user_data),
-		(void *)(((uintptr_t)buffer->data + buffer_size) & PAGE_MASK));
+		(void __user *)(((uintptr_t)
+			  buffer->user_data + buffer_size) & PAGE_MASK));
 
 	rb_erase(&buffer->rb_node, &alloc->allocated_buffers);
 	buffer->free = 1;
@@ -693,7 +685,6 @@ int binder_alloc_mmap_handler(struct binder_alloc *alloc,
 			      struct vm_area_struct *vma)
 {
 	int ret;
-	struct vm_struct *area;
 	const char *failure_string;
 	struct binder_buffer *buffer;
 
@@ -704,28 +695,9 @@ int binder_alloc_mmap_handler(struct binder_alloc *alloc,
 		goto err_already_mapped;
 	}
 
-	area = get_vm_area(vma->vm_end - vma->vm_start, VM_ALLOC);
+	alloc->buffer = (void __user *)vma->vm_start;
-	if (area == NULL) {
-		ret = -ENOMEM;
-		failure_string = "get_vm_area";
-		goto err_get_vm_area_failed;
-	}
-	alloc->buffer = area->addr;
-	alloc->user_buffer_offset =
-		vma->vm_start - (uintptr_t)alloc->buffer;
 	mutex_unlock(&binder_alloc_mmap_lock);
 
-#ifdef CONFIG_CPU_CACHE_VIPT
-	if (cache_is_vipt_aliasing()) {
-		while (CACHE_COLOUR(
-				(vma->vm_start ^ (uint32_t)alloc->buffer))) {
-			pr_info("%s: %d %lx-%lx maps %pK bad alignment\n",
-				__func__, alloc->pid, vma->vm_start,
-				vma->vm_end, alloc->buffer);
-			vma->vm_start += PAGE_SIZE;
-		}
-	}
-#endif
 	alloc->pages = kcalloc((vma->vm_end - vma->vm_start) / PAGE_SIZE,
 			       sizeof(alloc->pages[0]),
 			       GFP_KERNEL);
@@ -743,7 +715,7 @@ int binder_alloc_mmap_handler(struct binder_alloc *alloc,
 		goto err_alloc_buf_struct_failed;
 	}
 
-	buffer->data = alloc->buffer;
+	buffer->user_data = alloc->buffer;
 	list_add(&buffer->entry, &alloc->buffers);
 	buffer->free = 1;
 	binder_insert_free_buffer(alloc, buffer);
@@ -758,9 +730,7 @@ err_alloc_buf_struct_failed:
 	alloc->pages = NULL;
 err_alloc_pages_failed:
 	mutex_lock(&binder_alloc_mmap_lock);
-	vfree(alloc->buffer);
 	alloc->buffer = NULL;
-err_get_vm_area_failed:
 err_already_mapped:
 	mutex_unlock(&binder_alloc_mmap_lock);
 	binder_alloc_debug(BINDER_DEBUG_USER_ERROR,
@@ -806,7 +776,7 @@ void binder_alloc_deferred_release(struct binder_alloc *alloc)
 		int i;
 
 		for (i = 0; i < alloc->buffer_size / PAGE_SIZE; i++) {
-			void *page_addr;
+			void __user *page_addr;
 			bool on_lru;
 
 			if (!alloc->pages[i].page_ptr)
@@ -819,12 +789,10 @@ void binder_alloc_deferred_release(struct binder_alloc *alloc)
 				     "%s: %d: page %d at %pK %s\n",
 				     __func__, alloc->pid, i, page_addr,
 				     on_lru ? "on lru" : "active");
-			unmap_kernel_range((unsigned long)page_addr, PAGE_SIZE);
 			__free_page(alloc->pages[i].page_ptr);
 			page_count++;
 		}
 		kfree(alloc->pages);
-		vfree(alloc->buffer);
 	}
 	mutex_unlock(&alloc->mutex);
 	if (alloc->vma_vm_mm)
@@ -839,7 +807,7 @@ static void print_binder_buffer(struct seq_file *m, const char *prefix,
 				struct binder_buffer *buffer)
 {
 	seq_printf(m, "%s %d: %pK size %zd:%zd:%zd %s\n",
-		   prefix, buffer->debug_id, buffer->data,
+		   prefix, buffer->debug_id, buffer->user_data,
 		   buffer->data_size, buffer->offsets_size,
 		   buffer->extra_buffers_size,
 		   buffer->transaction ? "active" : "delivered");
@@ -964,7 +932,7 @@ enum lru_status binder_alloc_free_page(struct list_head *item,
 		if (!mmget_not_zero(alloc->vma_vm_mm))
 			goto err_mmget;
 		mm = alloc->vma_vm_mm;
-		if (!down_write_trylock(&mm->mmap_sem))
+		if (!down_read_trylock(&mm->mmap_sem))
 			goto err_down_write_mmap_sem_failed;
 	}
 
@@ -974,19 +942,16 @@ enum lru_status binder_alloc_free_page(struct list_head *item,
 	if (vma) {
 		trace_binder_unmap_user_start(alloc, index);
 
-		zap_page_range(vma,
+		zap_page_range(vma, page_addr, PAGE_SIZE);
-			       page_addr + alloc->user_buffer_offset,
-			       PAGE_SIZE);
 
 		trace_binder_unmap_user_end(alloc, index);
 
-		up_write(&mm->mmap_sem);
+		up_read(&mm->mmap_sem);
 		mmput(mm);
 	}
 
 	trace_binder_unmap_kernel_start(alloc, index);
 
-	unmap_kernel_range(page_addr, PAGE_SIZE);
 	__free_page(page->page_ptr);
 	page->page_ptr = NULL;
 
@@ -1053,3 +1018,173 @@ int binder_alloc_shrinker_init(void)
 	}
 	return ret;
 }
+
+/**
+ * check_buffer() - verify that buffer/offset is safe to access
+ * @alloc: binder_alloc for this proc
+ * @buffer: binder buffer to be accessed
+ * @offset: offset into @buffer data
+ * @bytes: bytes to access from offset
+ *
+ * Check that the @offset/@bytes are within the size of the given
+ * @buffer and that the buffer is currently active and not freeable.
+ * Offsets must also be multiples of sizeof(u32). The kernel is
+ * allowed to touch the buffer in two cases:
+ *
+ * 1) when the buffer is being created:
+ *     (buffer->free == 0 && buffer->allow_user_free == 0)
+ * 2) when the buffer is being torn down:
+ *     (buffer->free == 0 && buffer->transaction == NULL).
+ *
+ * Return: true if the buffer is safe to access
+ */
+static inline bool check_buffer(struct binder_alloc *alloc,
+				struct binder_buffer *buffer,
+				binder_size_t offset, size_t bytes)
+{
+	size_t buffer_size = binder_alloc_buffer_size(alloc, buffer);
+
+	return buffer_size >= bytes &&
+		offset <= buffer_size - bytes &&
+		IS_ALIGNED(offset, sizeof(u32)) &&
+		!buffer->free &&
+		(!buffer->allow_user_free || !buffer->transaction);
+}
+
+/**
+ * binder_alloc_get_page() - get kernel pointer for given buffer offset
+ * @alloc: binder_alloc for this proc
+ * @buffer: binder buffer to be accessed
+ * @buffer_offset: offset into @buffer data
+ * @pgoffp: address to copy final page offset to
+ *
+ * Lookup the struct page corresponding to the address
+ * at @buffer_offset into @buffer->user_data. If @pgoffp is not
+ * NULL, the byte-offset into the page is written there.
+ *
+ * The caller is responsible to ensure that the offset points
+ * to a valid address within the @buffer and that @buffer is
+ * not freeable by the user. Since it can't be freed, we are
+ * guaranteed that the corresponding elements of @alloc->pages[]
+ * cannot change.
+ *
+ * Return: struct page
+ */
+static struct page *binder_alloc_get_page(struct binder_alloc *alloc,
+					  struct binder_buffer *buffer,
+					  binder_size_t buffer_offset,
+					  pgoff_t *pgoffp)
+{
+	binder_size_t buffer_space_offset = buffer_offset +
+		(buffer->user_data - alloc->buffer);
+	pgoff_t pgoff = buffer_space_offset & ~PAGE_MASK;
+	size_t index = buffer_space_offset >> PAGE_SHIFT;
+	struct binder_lru_page *lru_page;
+
+	lru_page = &alloc->pages[index];
+	*pgoffp = pgoff;
+	return lru_page->page_ptr;
+}
+
+/**
+ * binder_alloc_copy_user_to_buffer() - copy src user to tgt user
+ * @alloc: binder_alloc for this proc
+ * @buffer: binder buffer to be accessed
+ * @buffer_offset: offset into @buffer data
+ * @from: userspace pointer to source buffer
+ * @bytes: bytes to copy
+ *
+ * Copy bytes from source userspace to target buffer.
+ *
+ * Return: bytes remaining to be copied
+ */
+unsigned long
+binder_alloc_copy_user_to_buffer(struct binder_alloc *alloc,
+				 struct binder_buffer *buffer,
+				 binder_size_t buffer_offset,
+				 const void __user *from,
+				 size_t bytes)
+{
+	if (!check_buffer(alloc, buffer, buffer_offset, bytes))
+		return bytes;
+
+	while (bytes) {
+		unsigned long size;
+		unsigned long ret;
+		struct page *page;
+		pgoff_t pgoff;
+		void *kptr;
+
+		page = binder_alloc_get_page(alloc, buffer,
+					     buffer_offset, &pgoff);
+		size = min_t(size_t, bytes, PAGE_SIZE - pgoff);
+		kptr = kmap(page) + pgoff;
+		ret = copy_from_user(kptr, from, size);
+		kunmap(page);
+		if (ret)
+			return bytes - size + ret;
+		bytes -= size;
+		from += size;
+		buffer_offset += size;
+	}
+	return 0;
+}
+
+static void binder_alloc_do_buffer_copy(struct binder_alloc *alloc,
+					bool to_buffer,
+					struct binder_buffer *buffer,
+					binder_size_t buffer_offset,
+					void *ptr,
+					size_t bytes)
+{
+	/* All copies must be 32-bit aligned and 32-bit size */
+	BUG_ON(!check_buffer(alloc, buffer, buffer_offset, bytes));
+
+	while (bytes) {
+		unsigned long size;
+		struct page *page;
+		pgoff_t pgoff;
+		void *tmpptr;
+		void *base_ptr;
+
+		page = binder_alloc_get_page(alloc, buffer,
+					     buffer_offset, &pgoff);
+		size = min_t(size_t, bytes, PAGE_SIZE - pgoff);
+		base_ptr = kmap_atomic(page);
+		tmpptr = base_ptr + pgoff;
+		if (to_buffer)
+			memcpy(tmpptr, ptr, size);
+		else
+			memcpy(ptr, tmpptr, size);
+		/*
+		 * kunmap_atomic() takes care of flushing the cache
+		 * if this device has VIVT cache arch
+		 */
+		kunmap_atomic(base_ptr);
+		bytes -= size;
+		pgoff = 0;
+		ptr = ptr + size;
+		buffer_offset += size;
+	}
+}
+
+void binder_alloc_copy_to_buffer(struct binder_alloc *alloc,
+				 struct binder_buffer *buffer,
+				 binder_size_t buffer_offset,
+				 void *src,
+				 size_t bytes)
+{
+	binder_alloc_do_buffer_copy(alloc, true, buffer, buffer_offset,
+				    src, bytes);
+}
+
+void binder_alloc_copy_from_buffer(struct binder_alloc *alloc,
+				   void *dest,
+				   struct binder_buffer *buffer,
+				   binder_size_t buffer_offset,
+				   size_t bytes)
+{
+	binder_alloc_do_buffer_copy(alloc, false, buffer, buffer_offset,
+				    dest, bytes);
+}
+

drivers/android/binder_alloc.h

@@ -22,6 +22,7 @@
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
 #include <linux/list_lru.h>
+#include <uapi/linux/android/binder.h>
 
 extern struct list_lru binder_alloc_lru;
 struct binder_transaction;
@@ -39,7 +40,7 @@ struct binder_transaction;
  * @data_size:          size of @transaction data
  * @offsets_size:       size of array of offsets
  * @extra_buffers_size: size of space for other objects (like sg lists)
- * @data:               pointer to base of buffer space
+ * @user_data:          user pointer to base of buffer space
  *
  * Bookkeeping structure for binder transaction buffers
  */
@@ -58,7 +59,7 @@ struct binder_buffer {
 	size_t data_size;
 	size_t offsets_size;
 	size_t extra_buffers_size;
-	void *data;
+	void __user *user_data;
 };
 
 /**
@@ -81,7 +82,6 @@ struct binder_lru_page {
  *                      (invariant after init)
  * @vma_vm_mm:          copy of vma->vm_mm (invarient after mmap)
  * @buffer:             base of per-proc address space mapped via mmap
- * @user_buffer_offset: offset between user and kernel VAs for buffer
  * @buffers:            list of all buffers for this proc
  * @free_buffers:       rb tree of buffers available for allocation
  *                      sorted by size
@@ -102,8 +102,7 @@ struct binder_alloc {
 	struct mutex mutex;
 	struct vm_area_struct *vma;
 	struct mm_struct *vma_vm_mm;
-	void *buffer;
+	void __user *buffer;
-	ptrdiff_t user_buffer_offset;
 	struct list_head buffers;
 	struct rb_root free_buffers;
 	struct rb_root allocated_buffers;
@@ -162,26 +161,24 @@ binder_alloc_get_free_async_space(struct binder_alloc *alloc)
 	return free_async_space;
 }
 
-/**
+unsigned long
- * binder_alloc_get_user_buffer_offset() - get offset between kernel/user addrs
+binder_alloc_copy_user_to_buffer(struct binder_alloc *alloc,
- * @alloc:	binder_alloc for this proc
+				 struct binder_buffer *buffer,
- *
+				 binder_size_t buffer_offset,
- * Return:	the offset between kernel and user-space addresses to use for
+				 const void __user *from,
- * virtual address conversion
+				 size_t bytes);
- */
+
-static inline ptrdiff_t
+void binder_alloc_copy_to_buffer(struct binder_alloc *alloc,
-binder_alloc_get_user_buffer_offset(struct binder_alloc *alloc)
+				 struct binder_buffer *buffer,
-{
+				 binder_size_t buffer_offset,
-	/*
+				 void *src,
-	 * user_buffer_offset is constant if vma is set and
+				 size_t bytes);
-	 * undefined if vma is not set. It is possible to
+
-	 * get here with !alloc->vma if the target process
+void binder_alloc_copy_from_buffer(struct binder_alloc *alloc,
-	 * is dying while a transaction is being initiated.
+				   void *dest,
-	 * Returning the old value is ok in this case and
+				   struct binder_buffer *buffer,
-	 * the transaction will fail.
+				   binder_size_t buffer_offset,
-	 */
+				   size_t bytes);
-	return alloc->user_buffer_offset;
-}
 
 #endif /* _LINUX_BINDER_ALLOC_H */
 

drivers/android/binder_alloc_selftest.c

@@ -102,11 +102,12 @@ static bool check_buffer_pages_allocated(struct binder_alloc *alloc,
 					 struct binder_buffer *buffer,
 					 size_t size)
 {
-	void *page_addr, *end;
+	void __user *page_addr;
+	void __user *end;
 	int page_index;
 
-	end = (void *)PAGE_ALIGN((uintptr_t)buffer->data + size);
+	end = (void __user *)PAGE_ALIGN((uintptr_t)buffer->user_data + size);
-	page_addr = buffer->data;
+	page_addr = buffer->user_data;
 	for (; page_addr < end; page_addr += PAGE_SIZE) {
 		page_index = (page_addr - alloc->buffer) / PAGE_SIZE;
 		if (!alloc->pages[page_index].page_ptr ||

drivers/android/binder_trace.h

@@ -293,7 +293,7 @@ DEFINE_EVENT(binder_buffer_class, binder_transaction_failed_buffer_release,
 
 TRACE_EVENT(binder_update_page_range,
 	TP_PROTO(struct binder_alloc *alloc, bool allocate,
-		 void *start, void *end),
+		 void __user *start, void __user *end),
 	TP_ARGS(alloc, allocate, start, end),
 	TP_STRUCT__entry(
 		__field(int, proc)

drivers/base/component.c

@@ -16,11 +16,38 @@
 #include <linux/slab.h>
 #include <linux/debugfs.h>
 
+/**
+ * DOC: overview
+ *
+ * The component helper allows drivers to collect a pile of sub-devices,
+ * including their bound drivers, into an aggregate driver. Various subsystems
+ * already provide functions to get hold of such components, e.g.
+ * of_clk_get_by_name(). The component helper can be used when such a
+ * subsystem-specific way to find a device is not available: The component
+ * helper fills the niche of aggregate drivers for specific hardware, where
+ * further standardization into a subsystem would not be practical. The common
+ * example is when a logical device (e.g. a DRM display driver) is spread around
+ * the SoC on various component (scanout engines, blending blocks, transcoders
+ * for various outputs and so on).
+ *
+ * The component helper also doesn't solve runtime dependencies, e.g. for system
+ * suspend and resume operations. See also :ref:`device links<device_link>`.
+ *
+ * Components are registered using component_add() and unregistered with
+ * component_del(), usually from the driver's probe and disconnect functions.
+ *
+ * Aggregate drivers first assemble a component match list of what they need
+ * using component_match_add(). This is then registered as an aggregate driver
+ * using component_master_add_with_match(), and unregistered using
+ * component_master_del().
+ */
+
 struct component;
 
 struct component_match_array {
 	void *data;
 	int (*compare)(struct device *, void *);
+	int (*compare_typed)(struct device *, int, void *);
 	void (*release)(struct device *, void *);
 	struct component *component;
 	bool duplicate;
@@ -48,6 +75,7 @@ struct component {
 	bool bound;
 
 	const struct component_ops *ops;
+	int subcomponent;
 	struct device *dev;
 };
 
@@ -132,7 +160,7 @@ static struct master *__master_find(struct device *dev,
 }
 
 static struct component *find_component(struct master *master,
-	int (*compare)(struct device *, void *), void *compare_data)
+	struct component_match_array *mc)
 {
 	struct component *c;
 
@@ -140,7 +168,11 @@ static struct component *find_component(struct master *master,
 		if (c->master && c->master != master)
 			continue;
 
-		if (compare(c->dev, compare_data))
+		if (mc->compare && mc->compare(c->dev, mc->data))
+			return c;
+
+		if (mc->compare_typed &&
+		    mc->compare_typed(c->dev, c->subcomponent, mc->data))
 			return c;
 	}
 
@@ -166,7 +198,7 @@ static int find_components(struct master *master)
 		if (match->compare[i].component)
 			continue;
 
-		c = find_component(master, mc->compare, mc->data);
+		c = find_component(master, mc);
 		if (!c) {
 			ret = -ENXIO;
 			break;
@@ -301,15 +333,12 @@ static int component_match_realloc(struct device *dev,
 	return 0;
 }
 
-/*
+static void __component_match_add(struct device *master,
- * Add a component to be matched, with a release function.
- *
- * The match array is first created or extended if necessary.
- */
-void component_match_add_release(struct device *master,
 	struct component_match **matchptr,
 	void (*release)(struct device *, void *),
-	int (*compare)(struct device *, void *), void *compare_data)
+	int (*compare)(struct device *, void *),
+	int (*compare_typed)(struct device *, int, void *),
+	void *compare_data)
 {
 	struct component_match *match = *matchptr;
 
@@ -341,13 +370,69 @@ void component_match_add_release(struct device *master,
 	}
 
 	match->compare[match->num].compare = compare;
+	match->compare[match->num].compare_typed = compare_typed;
 	match->compare[match->num].release = release;
 	match->compare[match->num].data = compare_data;
 	match->compare[match->num].component = NULL;
 	match->num++;
 }
+
+/**
+ * component_match_add_release - add a component match with release callback
+ * @master: device with the aggregate driver
+ * @matchptr: pointer to the list of component matches
+ * @release: release function for @compare_data
+ * @compare: compare function to match against all components
+ * @compare_data: opaque pointer passed to the @compare function
+ *
+ * Adds a new component match to the list stored in @matchptr, which the @master
+ * aggregate driver needs to function. The list of component matches pointed to
+ * by @matchptr must be initialized to NULL before adding the first match. This
+ * only matches against components added with component_add().
+ *
+ * The allocated match list in @matchptr is automatically released using devm
+ * actions, where upon @release will be called to free any references held by
+ * @compare_data, e.g. when @compare_data is a &device_node that must be
+ * released with of_node_put().
+ *
+ * See also component_match_add() and component_match_add_typed().
+ */
+void component_match_add_release(struct device *master,
+	struct component_match **matchptr,
+	void (*release)(struct device *, void *),
+	int (*compare)(struct device *, void *), void *compare_data)
+{
+	__component_match_add(master, matchptr, release, compare, NULL,
+			      compare_data);
+}
 EXPORT_SYMBOL(component_match_add_release);
 
+/**
+ * component_match_add_typed - add a compent match for a typed component
+ * @master: device with the aggregate driver
+ * @matchptr: pointer to the list of component matches
+ * @compare_typed: compare function to match against all typed components
+ * @compare_data: opaque pointer passed to the @compare function
+ *
+ * Adds a new component match to the list stored in @matchptr, which the @master
+ * aggregate driver needs to function. The list of component matches pointed to
+ * by @matchptr must be initialized to NULL before adding the first match. This
+ * only matches against components added with component_add_typed().
+ *
+ * The allocated match list in @matchptr is automatically released using devm
+ * actions.
+ *
+ * See also component_match_add_release() and component_match_add_typed().
+ */
+void component_match_add_typed(struct device *master,
+	struct component_match **matchptr,
+	int (*compare_typed)(struct device *, int, void *), void *compare_data)
+{
+	__component_match_add(master, matchptr, NULL, NULL, compare_typed,
+			      compare_data);
+}
+EXPORT_SYMBOL(component_match_add_typed);
+
 static void free_master(struct master *master)
 {
 	struct component_match *match = master->match;
@@ -367,6 +452,18 @@ static void free_master(struct master *master)
 	kfree(master);
 }
 
+/**
+ * component_master_add_with_match - register an aggregate driver
+ * @dev: device with the aggregate driver
+ * @ops: callbacks for the aggregate driver
+ * @match: component match list for the aggregate driver
+ *
+ * Registers a new aggregate driver consisting of the components added to @match
+ * by calling one of the component_match_add() functions. Once all components in
+ * @match are available, it will be assembled by calling
+ * &component_master_ops.bind from @ops. Must be unregistered by calling
+ * component_master_del().
+ */
 int component_master_add_with_match(struct device *dev,
 	const struct component_master_ops *ops,
 	struct component_match *match)
@@ -403,6 +500,15 @@ int component_master_add_with_match(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(component_master_add_with_match);
 
+/**
+ * component_master_del - unregister an aggregate driver
+ * @dev: device with the aggregate driver
+ * @ops: callbacks for the aggregate driver
+ *
+ * Unregisters an aggregate driver registered with
+ * component_master_add_with_match(). If necessary the aggregate driver is first
+ * disassembled by calling &component_master_ops.unbind from @ops.
+ */
 void component_master_del(struct device *dev,
 	const struct component_master_ops *ops)
 {
@@ -430,6 +536,15 @@ static void component_unbind(struct component *component,
 	devres_release_group(component->dev, component);
 }
 
+/**
+ * component_unbind_all - unbind all component to an aggregate driver
+ * @master_dev: device with the aggregate driver
+ * @data: opaque pointer, passed to all components
+ *
+ * Unbinds all components to the aggregate @dev by passing @data to their
+ * &component_ops.unbind functions. Should be called from
+ * &component_master_ops.unbind.
+ */
 void component_unbind_all(struct device *master_dev, void *data)
 {
 	struct master *master;
@@ -503,6 +618,15 @@ static int component_bind(struct component *component, struct master *master,
 	return ret;
 }
 
+/**
+ * component_bind_all - bind all component to an aggregate driver
+ * @master_dev: device with the aggregate driver
+ * @data: opaque pointer, passed to all components
+ *
+ * Binds all components to the aggregate @dev by passing @data to their
+ * &component_ops.bind functions. Should be called from
+ * &component_master_ops.bind.
+ */
 int component_bind_all(struct device *master_dev, void *data)
 {
 	struct master *master;
@@ -537,7 +661,8 @@ int component_bind_all(struct device *master_dev, void *data)
 }
 EXPORT_SYMBOL_GPL(component_bind_all);
 
-int component_add(struct device *dev, const struct component_ops *ops)
+static int __component_add(struct device *dev, const struct component_ops *ops,
+	int subcomponent)
 {
 	struct component *component;
 	int ret;
@@ -548,6 +673,7 @@ int component_add(struct device *dev, const struct component_ops *ops)
 
 	component->ops = ops;
 	component->dev = dev;
+	component->subcomponent = subcomponent;
 
 	dev_dbg(dev, "adding component (ops %ps)\n", ops);
 
@@ -566,8 +692,66 @@ int component_add(struct device *dev, const struct component_ops *ops)
 
 	return ret < 0 ? ret : 0;
 }
+
+/**
+ * component_add_typed - register a component
+ * @dev: component device
+ * @ops: component callbacks
+ * @subcomponent: nonzero identifier for subcomponents
+ *
+ * Register a new component for @dev. Functions in @ops will be call when the
+ * aggregate driver is ready to bind the overall driver by calling
+ * component_bind_all(). See also &struct component_ops.
+ *
+ * @subcomponent must be nonzero and is used to differentiate between multiple
+ * components registerd on the same device @dev. These components are match
+ * using component_match_add_typed().
+ *
+ * The component needs to be unregistered at driver unload/disconnect by
+ * calling component_del().
+ *
+ * See also component_add().
+ */
+int component_add_typed(struct device *dev, const struct component_ops *ops,
+	int subcomponent)
+{
+	if (WARN_ON(subcomponent == 0))
+		return -EINVAL;
+
+	return __component_add(dev, ops, subcomponent);
+}
+EXPORT_SYMBOL_GPL(component_add_typed);
+
+/**
+ * component_add - register a component
+ * @dev: component device
+ * @ops: component callbacks
+ *
+ * Register a new component for @dev. Functions in @ops will be called when the
+ * aggregate driver is ready to bind the overall driver by calling
+ * component_bind_all(). See also &struct component_ops.
+ *
+ * The component needs to be unregistered at driver unload/disconnect by
+ * calling component_del().
+ *
+ * See also component_add_typed() for a variant that allows multipled different
+ * components on the same device.
+ */
+int component_add(struct device *dev, const struct component_ops *ops)
+{
+	return __component_add(dev, ops, 0);
+}
 EXPORT_SYMBOL_GPL(component_add);
 
+/**
+ * component_del - unregister a component
+ * @dev: component device
+ * @ops: component callbacks
+ *
+ * Unregister a component added with component_add(). If the component is bound
+ * into an aggregate driver, this will force the entire aggregate driver, including
+ * all its components, to be unbound.
+ */
 void component_del(struct device *dev, const struct component_ops *ops)
 {
 	struct component *c, *component = NULL;

drivers/char/Kconfig

@@ -244,26 +244,23 @@ source "drivers/char/hw_random/Kconfig"
 
 config NVRAM
 	tristate "/dev/nvram support"
-	depends on ATARI || X86 || GENERIC_NVRAM
+	depends on X86 || HAVE_ARCH_NVRAM_OPS
+	default M68K || PPC
 	---help---
 	  If you say Y here and create a character special file /dev/nvram
 	  with major number 10 and minor number 144 using mknod ("man mknod"),
-	  you get read and write access to the extra bytes of non-volatile
+	  you get read and write access to the non-volatile memory.
-	  memory in the real time clock (RTC), which is contained in every PC
-	  and most Ataris.  The actual number of bytes varies, depending on the
-	  nvram in the system, but is usually 114 (128-14 for the RTC).
 
-	  This memory is conventionally called "CMOS RAM" on PCs and "NVRAM"
+	  /dev/nvram may be used to view settings in NVRAM or to change them
-	  on Ataris. /dev/nvram may be used to view settings there, or to
+	  (with some utility). It could also be used to frequently
-	  change them (with some utility). It could also be used to frequently
 	  save a few bits of very important data that may not be lost over
 	  power-off and for which writing to disk is too insecure. Note
 	  however that most NVRAM space in a PC belongs to the BIOS and you
 	  should NEVER idly tamper with it. See Ralf Brown's interrupt list
 	  for a guide to the use of CMOS bytes by your BIOS.
 
-	  On Atari machines, /dev/nvram is always configured and does not need
+	  This memory is conventionally called "NVRAM" on PowerPC machines,
-	  to be selected.
+	  "CMOS RAM" on PCs, "NVRAM" on Ataris and "PRAM" on Macintoshes.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called nvram.

drivers/char/Makefile

@@ -26,11 +26,7 @@ obj-$(CONFIG_RTC)		+= rtc.o
 obj-$(CONFIG_HPET)		+= hpet.o
 obj-$(CONFIG_EFI_RTC)		+= efirtc.o
 obj-$(CONFIG_XILINX_HWICAP)	+= xilinx_hwicap/
-ifeq ($(CONFIG_GENERIC_NVRAM),y)
+obj-$(CONFIG_NVRAM)		+= nvram.o
-  obj-$(CONFIG_NVRAM)	+= generic_nvram.o
-else
-  obj-$(CONFIG_NVRAM)	+= nvram.o
-endif
 obj-$(CONFIG_TOSHIBA)		+= toshiba.o
 obj-$(CONFIG_DS1620)		+= ds1620.o
 obj-$(CONFIG_HW_RANDOM)		+= hw_random/

drivers/char/applicom.c

@@ -32,6 +32,7 @@
 #include <linux/wait.h>
 #include <linux/init.h>
 #include <linux/fs.h>
+#include <linux/nospec.h>
 
 #include <asm/io.h>
 #include <linux/uaccess.h>
@@ -386,7 +387,11 @@ static ssize_t ac_write(struct file *file, const char __user *buf, size_t count,
 	TicCard = st_loc.tic_des_from_pc;	/* tic number to send            */
 	IndexCard = NumCard - 1;
 
-	if((NumCard < 1) || (NumCard > MAX_BOARD) || !apbs[IndexCard].RamIO)
+	if (IndexCard >= MAX_BOARD)
+		return -EINVAL;
+	IndexCard = array_index_nospec(IndexCard, MAX_BOARD);
+
+	if (!apbs[IndexCard].RamIO)
 		return -EINVAL;
 
 #ifdef DEBUG
@@ -697,6 +702,7 @@ static long ac_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	unsigned char IndexCard;
 	void __iomem *pmem;
 	int ret = 0;
+	static int warncount = 10;
 	volatile unsigned char byte_reset_it;
 	struct st_ram_io *adgl;
 	void __user *argp = (void __user *)arg;
@@ -711,16 +717,12 @@ static long ac_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	mutex_lock(&ac_mutex);	
 	IndexCard = adgl->num_card-1;
 	 
-	if(cmd != 6 && ((IndexCard >= MAX_BOARD) || !apbs[IndexCard].RamIO)) {
+	if (cmd != 6 && IndexCard >= MAX_BOARD)
-		static int warncount = 10;
+		goto err;
-		if (warncount) {
+	IndexCard = array_index_nospec(IndexCard, MAX_BOARD);
-			printk( KERN_WARNING "APPLICOM driver IOCTL, bad board number %d\n",(int)IndexCard+1);
+
-			warncount--;
+	if (cmd != 6 && !apbs[IndexCard].RamIO)
-		}
+		goto err;
-		kfree(adgl);
-		mutex_unlock(&ac_mutex);
-		return -EINVAL;
-	}
 
 	switch (cmd) {
 		
@@ -838,5 +840,16 @@ static long ac_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	kfree(adgl);
 	mutex_unlock(&ac_mutex);
 	return 0;
+
+err:
+	if (warncount) {
+		pr_warn("APPLICOM driver IOCTL, bad board number %d\n",
+			(int)IndexCard + 1);
+		warncount--;
+	}
+	kfree(adgl);
+	mutex_unlock(&ac_mutex);
+	return -EINVAL;
+
 }
 

drivers/char/efirtc.c

@@ -254,27 +254,6 @@ static long efi_rtc_ioctl(struct file *file, unsigned int cmd,
 	return -ENOTTY;
 }
 
-/*
- *	We enforce only one user at a time here with the open/close.
- *	Also clear the previous interrupt data on an open, and clean
- *	up things on a close.
- */
-
-static int efi_rtc_open(struct inode *inode, struct file *file)
-{
-	/*
-	 * nothing special to do here
-	 * We do accept multiple open files at the same time as we
-	 * synchronize on the per call operation.
-	 */
-	return 0;
-}
-
-static int efi_rtc_close(struct inode *inode, struct file *file)
-{
-	return 0;
-}
-
 /*
  *	The various file operations we support.
  */
@@ -282,8 +261,6 @@ static int efi_rtc_close(struct inode *inode, struct file *file)
 static const struct file_operations efi_rtc_fops = {
 	.owner		= THIS_MODULE,
 	.unlocked_ioctl	= efi_rtc_ioctl,
-	.open		= efi_rtc_open,
-	.release	= efi_rtc_close,
 	.llseek		= no_llseek,
 };
 

drivers/char/generic_nvram.c

@@ -1,159 +0,0 @@
-/*
- * Generic /dev/nvram driver for architectures providing some
- * "generic" hooks, that is :
- *
- * nvram_read_byte, nvram_write_byte, nvram_sync, nvram_get_size
- *
- * Note that an additional hook is supported for PowerMac only
- * for getting the nvram "partition" informations
- *
- */
-
-#define NVRAM_VERSION "1.1"
-
-#include <linux/module.h>
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
-#include <linux/fcntl.h>
-#include <linux/init.h>
-#include <linux/mutex.h>
-#include <linux/pagemap.h>
-#include <linux/uaccess.h>
-#include <asm/nvram.h>
-#ifdef CONFIG_PPC_PMAC
-#include <asm/machdep.h>
-#endif
-
-#define NVRAM_SIZE	8192
-
-static DEFINE_MUTEX(nvram_mutex);
-static ssize_t nvram_len;
-
-static loff_t nvram_llseek(struct file *file, loff_t offset, int origin)
-{
-	return generic_file_llseek_size(file, offset, origin,
-					MAX_LFS_FILESIZE, nvram_len);
-}
-
-static ssize_t read_nvram(struct file *file, char __user *buf,
-			  size_t count, loff_t *ppos)
-{
-	unsigned int i;
-	char __user *p = buf;
-
-	if (!access_ok(buf, count))
-		return -EFAULT;
-	if (*ppos >= nvram_len)
-		return 0;
-	for (i = *ppos; count > 0 && i < nvram_len; ++i, ++p, --count)
-		if (__put_user(nvram_read_byte(i), p))
-			return -EFAULT;
-	*ppos = i;
-	return p - buf;
-}
-
-static ssize_t write_nvram(struct file *file, const char __user *buf,
-			   size_t count, loff_t *ppos)
-{
-	unsigned int i;
-	const char __user *p = buf;
-	char c;
-
-	if (!access_ok(buf, count))
-		return -EFAULT;
-	if (*ppos >= nvram_len)
-		return 0;
-	for (i = *ppos; count > 0 && i < nvram_len; ++i, ++p, --count) {
-		if (__get_user(c, p))
-			return -EFAULT;
-		nvram_write_byte(c, i);
-	}
-	*ppos = i;
-	return p - buf;
-}
-
-static int nvram_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
-	switch(cmd) {
-#ifdef CONFIG_PPC_PMAC
-	case OBSOLETE_PMAC_NVRAM_GET_OFFSET:
-		printk(KERN_WARNING "nvram: Using obsolete PMAC_NVRAM_GET_OFFSET ioctl\n");
-	case IOC_NVRAM_GET_OFFSET: {
-		int part, offset;
-
-		if (!machine_is(powermac))
-			return -EINVAL;
-		if (copy_from_user(&part, (void __user*)arg, sizeof(part)) != 0)
-			return -EFAULT;
-		if (part < pmac_nvram_OF || part > pmac_nvram_NR)
-			return -EINVAL;
-		offset = pmac_get_partition(part);
-		if (copy_to_user((void __user*)arg, &offset, sizeof(offset)) != 0)
-			return -EFAULT;
-		break;
-	}
-#endif /* CONFIG_PPC_PMAC */
-	case IOC_NVRAM_SYNC:
-		nvram_sync();
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static long nvram_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
-	int ret;
-
-	mutex_lock(&nvram_mutex);
-	ret = nvram_ioctl(file, cmd, arg);
-	mutex_unlock(&nvram_mutex);
-
-	return ret;
-}
-
-const struct file_operations nvram_fops = {
-	.owner		= THIS_MODULE,
-	.llseek		= nvram_llseek,
-	.read		= read_nvram,
-	.write		= write_nvram,
-	.unlocked_ioctl	= nvram_unlocked_ioctl,
-};
-
-static struct miscdevice nvram_dev = {
-	NVRAM_MINOR,
-	"nvram",
-	&nvram_fops
-};
-
-int __init nvram_init(void)
-{
-	int ret = 0;
-
-	printk(KERN_INFO "Generic non-volatile memory driver v%s\n",
-		NVRAM_VERSION);
-	ret = misc_register(&nvram_dev);
-	if (ret != 0)
-		goto out;
-
-	nvram_len = nvram_get_size();
-	if (nvram_len < 0)
-		nvram_len = NVRAM_SIZE;
-
-out:
-	return ret;
-}
-
-void __exit nvram_cleanup(void)
-{
-        misc_deregister( &nvram_dev );
-}
-
-module_init(nvram_init);
-module_exit(nvram_cleanup);
-MODULE_LICENSE("GPL");

drivers/char/hpet.c

@@ -377,7 +377,7 @@ static __init int hpet_mmap_enable(char *str)
 	pr_info("HPET mmap %s\n", hpet_mmap_enabled ? "enabled" : "disabled");
 	return 1;
 }
-__setup("hpet_mmap", hpet_mmap_enable);
+__setup("hpet_mmap=", hpet_mmap_enable);
 
 static int hpet_mmap(struct file *file, struct vm_area_struct *vma)
 {
@@ -842,7 +842,6 @@ int hpet_alloc(struct hpet_data *hdp)
 	struct hpet_dev *devp;
 	u32 i, ntimer;
 	struct hpets *hpetp;
-	size_t siz;
 	struct hpet __iomem *hpet;
 	static struct hpets *last;
 	unsigned long period;
@@ -860,10 +859,8 @@ int hpet_alloc(struct hpet_data *hdp)
 		return 0;
 	}
 
-	siz = sizeof(struct hpets) + ((hdp->hd_nirqs - 1) *
+	hpetp = kzalloc(struct_size(hpetp, hp_dev, hdp->hd_nirqs - 1),
-				      sizeof(struct hpet_dev));
+			GFP_KERNEL);
-
-	hpetp = kzalloc(siz, GFP_KERNEL);
 
 	if (!hpetp)
 		return -ENOMEM;

drivers/char/lp.c

@@ -729,7 +729,7 @@ static long lp_ioctl(struct file *file, unsigned int cmd,
 			ret = lp_set_timeout32(minor, (void __user *)arg);
 			break;
 		}
-		/* fallthrough for 64-bit */
+		/* fall through - for 64-bit */
 	case LPSETTIMEOUT_NEW:
 		ret = lp_set_timeout64(minor, (void __user *)arg);
 		break;
@@ -757,7 +757,7 @@ static long lp_compat_ioctl(struct file *file, unsigned int cmd,
 			ret = lp_set_timeout32(minor, (void __user *)arg);
 			break;
 		}
-		/* fallthrough for x32 mode */
+		/* fall through - for x32 mode */
 	case LPSETTIMEOUT_NEW:
 		ret = lp_set_timeout64(minor, (void __user *)arg);
 		break;

drivers/char/mbcs.c

@@ -50,6 +50,7 @@ static LIST_HEAD(soft_list);
  * file operations
  */
 static const struct file_operations mbcs_ops = {
+	.owner = THIS_MODULE,
 	.open = mbcs_open,
 	.llseek = mbcs_sram_llseek,
 	.read = mbcs_sram_read,

drivers/char/nvram.c

@@ -21,13 +21,6 @@
  * ioctl(NVRAM_SETCKS) (doesn't change contents, just makes checksum valid
  * again; use with care!)
  *
- * This file also provides some functions for other parts of the kernel that
- * want to access the NVRAM: nvram_{read,write,check_checksum,set_checksum}.
- * Obviously this can be used only if this driver is always configured into
- * the kernel and is not a module. Since the functions are used by some Atari
- * drivers, this is the case on the Atari.
- *
- *
  * 	1.1	Cesar Barros: SMP locking fixes
  * 		added changelog
  * 	1.2	Erik Gilling: Cobalt Networks support
@@ -39,64 +32,6 @@
 
 #include <linux/module.h>
 #include <linux/nvram.h>
-
-#define PC		1
-#define ATARI		2
-
-/* select machine configuration */
-#if defined(CONFIG_ATARI)
-#  define MACH ATARI
-#elif defined(__i386__) || defined(__x86_64__) || defined(__arm__)  /* and ?? */
-#  define MACH PC
-#else
-#  error Cannot build nvram driver for this machine configuration.
-#endif
-
-#if MACH == PC
-
-/* RTC in a PC */
-#define CHECK_DRIVER_INIT()	1
-
-/* On PCs, the checksum is built only over bytes 2..31 */
-#define PC_CKS_RANGE_START	2
-#define PC_CKS_RANGE_END	31
-#define PC_CKS_LOC		32
-#define NVRAM_BYTES		(128-NVRAM_FIRST_BYTE)
-
-#define mach_check_checksum	pc_check_checksum
-#define mach_set_checksum	pc_set_checksum
-#define mach_proc_infos		pc_proc_infos
-
-#endif
-
-#if MACH == ATARI
-
-/* Special parameters for RTC in Atari machines */
-#include <asm/atarihw.h>
-#include <asm/atariints.h>
-#define RTC_PORT(x)		(TT_RTC_BAS + 2*(x))
-#define CHECK_DRIVER_INIT()	(MACH_IS_ATARI && ATARIHW_PRESENT(TT_CLK))
-
-#define NVRAM_BYTES		50
-
-/* On Ataris, the checksum is over all bytes except the checksum bytes
- * themselves; these are at the very end */
-#define ATARI_CKS_RANGE_START	0
-#define ATARI_CKS_RANGE_END	47
-#define ATARI_CKS_LOC		48
-
-#define mach_check_checksum	atari_check_checksum
-#define mach_set_checksum	atari_set_checksum
-#define mach_proc_infos		atari_proc_infos
-
-#endif
-
-/* Note that *all* calls to CMOS_READ and CMOS_WRITE must be done with
- * rtc_lock held. Due to the index-port/data-port design of the RTC, we
- * don't want two different things trying to get to it at once. (e.g. the
- * periodic 11 min sync from kernel/time/ntp.c vs. this driver.)
- */
-
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/miscdevice.h>
@@ -106,28 +41,26 @@
 #include <linux/init.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
+#include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/uaccess.h>
 #include <linux/mutex.h>
 #include <linux/pagemap.h>
 
+#ifdef CONFIG_PPC
+#include <asm/nvram.h>
+#endif
 
 static DEFINE_MUTEX(nvram_mutex);
 static DEFINE_SPINLOCK(nvram_state_lock);
 static int nvram_open_cnt;	/* #times opened */
 static int nvram_open_mode;	/* special open modes */
+static ssize_t nvram_size;
 #define NVRAM_WRITE		1 /* opened for writing (exclusive) */
 #define NVRAM_EXCL		2 /* opened with O_EXCL */
 
-static int mach_check_checksum(void);
+#ifdef CONFIG_X86
-static void mach_set_checksum(void);
-
-#ifdef CONFIG_PROC_FS
-static void mach_proc_infos(unsigned char *contents, struct seq_file *seq,
-								void *offset);
-#endif
-
 /*
  * These functions are provided to be called internally or by other parts of
  * the kernel. It's up to the caller to ensure correct checksum before reading
@@ -139,13 +72,20 @@ static void mach_proc_infos(unsigned char *contents, struct seq_file *seq,
  * know about the RTC cruft.
  */
 
-unsigned char __nvram_read_byte(int i)
+#define NVRAM_BYTES		(128 - NVRAM_FIRST_BYTE)
+
+/* Note that *all* calls to CMOS_READ and CMOS_WRITE must be done with
+ * rtc_lock held. Due to the index-port/data-port design of the RTC, we
+ * don't want two different things trying to get to it at once. (e.g. the
+ * periodic 11 min sync from kernel/time/ntp.c vs. this driver.)
+ */
+
+static unsigned char __nvram_read_byte(int i)
 {
 	return CMOS_READ(NVRAM_FIRST_BYTE + i);
 }
-EXPORT_SYMBOL(__nvram_read_byte);
 
-unsigned char nvram_read_byte(int i)
+static unsigned char pc_nvram_read_byte(int i)
 {
 	unsigned long flags;
 	unsigned char c;
@@ -155,16 +95,14 @@ unsigned char nvram_read_byte(int i)
 	spin_unlock_irqrestore(&rtc_lock, flags);
 	return c;
 }
-EXPORT_SYMBOL(nvram_read_byte);
 
 /* This races nicely with trying to read with checksum checking (nvram_read) */
-void __nvram_write_byte(unsigned char c, int i)
+static void __nvram_write_byte(unsigned char c, int i)
 {
 	CMOS_WRITE(c, NVRAM_FIRST_BYTE + i);
 }
-EXPORT_SYMBOL(__nvram_write_byte);
 
-void nvram_write_byte(unsigned char c, int i)
+static void pc_nvram_write_byte(unsigned char c, int i)
 {
 	unsigned long flags;
 
@@ -172,172 +110,266 @@ void nvram_write_byte(unsigned char c, int i)
 	__nvram_write_byte(c, i);
 	spin_unlock_irqrestore(&rtc_lock, flags);
 }
-EXPORT_SYMBOL(nvram_write_byte);
 
-int __nvram_check_checksum(void)
+/* On PCs, the checksum is built only over bytes 2..31 */
+#define PC_CKS_RANGE_START	2
+#define PC_CKS_RANGE_END	31
+#define PC_CKS_LOC		32
+
+static int __nvram_check_checksum(void)
 {
-	return mach_check_checksum();
+	int i;
-}
+	unsigned short sum = 0;
-EXPORT_SYMBOL(__nvram_check_checksum);
+	unsigned short expect;
 
-int nvram_check_checksum(void)
+	for (i = PC_CKS_RANGE_START; i <= PC_CKS_RANGE_END; ++i)
-{
+		sum += __nvram_read_byte(i);
-	unsigned long flags;
+	expect = __nvram_read_byte(PC_CKS_LOC)<<8 |
-	int rv;
+	    __nvram_read_byte(PC_CKS_LOC+1);
-
+	return (sum & 0xffff) == expect;
-	spin_lock_irqsave(&rtc_lock, flags);
-	rv = __nvram_check_checksum();
-	spin_unlock_irqrestore(&rtc_lock, flags);
-	return rv;
 }
-EXPORT_SYMBOL(nvram_check_checksum);
 
 static void __nvram_set_checksum(void)
 {
-	mach_set_checksum();
+	int i;
+	unsigned short sum = 0;
+
+	for (i = PC_CKS_RANGE_START; i <= PC_CKS_RANGE_END; ++i)
+		sum += __nvram_read_byte(i);
+	__nvram_write_byte(sum >> 8, PC_CKS_LOC);
+	__nvram_write_byte(sum & 0xff, PC_CKS_LOC + 1);
 }
 
-#if 0
+static long pc_nvram_set_checksum(void)
-void nvram_set_checksum(void)
 {
-	unsigned long flags;
+	spin_lock_irq(&rtc_lock);
-
-	spin_lock_irqsave(&rtc_lock, flags);
 	__nvram_set_checksum();
-	spin_unlock_irqrestore(&rtc_lock, flags);
+	spin_unlock_irq(&rtc_lock);
+	return 0;
 }
-#endif  /*  0  */
+
+static long pc_nvram_initialize(void)
+{
+	ssize_t i;
+
+	spin_lock_irq(&rtc_lock);
+	for (i = 0; i < NVRAM_BYTES; ++i)
+		__nvram_write_byte(0, i);
+	__nvram_set_checksum();
+	spin_unlock_irq(&rtc_lock);
+	return 0;
+}
+
+static ssize_t pc_nvram_get_size(void)
+{
+	return NVRAM_BYTES;
+}
+
+static ssize_t pc_nvram_read(char *buf, size_t count, loff_t *ppos)
+{
+	char *p = buf;
+	loff_t i;
+
+	spin_lock_irq(&rtc_lock);
+	if (!__nvram_check_checksum()) {
+		spin_unlock_irq(&rtc_lock);
+		return -EIO;
+	}
+	for (i = *ppos; count > 0 && i < NVRAM_BYTES; --count, ++i, ++p)
+		*p = __nvram_read_byte(i);
+	spin_unlock_irq(&rtc_lock);
+
+	*ppos = i;
+	return p - buf;
+}
+
+static ssize_t pc_nvram_write(char *buf, size_t count, loff_t *ppos)
+{
+	char *p = buf;
+	loff_t i;
+
+	spin_lock_irq(&rtc_lock);
+	if (!__nvram_check_checksum()) {
+		spin_unlock_irq(&rtc_lock);
+		return -EIO;
+	}
+	for (i = *ppos; count > 0 && i < NVRAM_BYTES; --count, ++i, ++p)
+		__nvram_write_byte(*p, i);
+	__nvram_set_checksum();
+	spin_unlock_irq(&rtc_lock);
+
+	*ppos = i;
+	return p - buf;
+}
+
+const struct nvram_ops arch_nvram_ops = {
+	.read           = pc_nvram_read,
+	.write          = pc_nvram_write,
+	.read_byte      = pc_nvram_read_byte,
+	.write_byte     = pc_nvram_write_byte,
+	.get_size       = pc_nvram_get_size,
+	.set_checksum   = pc_nvram_set_checksum,
+	.initialize     = pc_nvram_initialize,
+};
+EXPORT_SYMBOL(arch_nvram_ops);
+#endif /* CONFIG_X86 */
 
 /*
  * The are the file operation function for user access to /dev/nvram
  */
 
-static loff_t nvram_llseek(struct file *file, loff_t offset, int origin)
+static loff_t nvram_misc_llseek(struct file *file, loff_t offset, int origin)
 {
 	return generic_file_llseek_size(file, offset, origin, MAX_LFS_FILESIZE,
-					NVRAM_BYTES);
+					nvram_size);
 }
 
-static ssize_t nvram_read(struct file *file, char __user *buf,
+static ssize_t nvram_misc_read(struct file *file, char __user *buf,
-						size_t count, loff_t *ppos)
+			       size_t count, loff_t *ppos)
 {
-	unsigned char contents[NVRAM_BYTES];
+	char *tmp;
-	unsigned i = *ppos;
+	ssize_t ret;
-	unsigned char *tmp;
 
-	spin_lock_irq(&rtc_lock);
 
-	if (!__nvram_check_checksum())
+	if (!access_ok(buf, count))
-		goto checksum_err;
-
-	for (tmp = contents; count-- > 0 && i < NVRAM_BYTES; ++i, ++tmp)
-		*tmp = __nvram_read_byte(i);
-
-	spin_unlock_irq(&rtc_lock);
-
-	if (copy_to_user(buf, contents, tmp - contents))
 		return -EFAULT;
+	if (*ppos >= nvram_size)
+		return 0;
 
-	*ppos = i;
+	count = min_t(size_t, count, nvram_size - *ppos);
+	count = min_t(size_t, count, PAGE_SIZE);
 
-	return tmp - contents;
+	tmp = kmalloc(count, GFP_KERNEL);
+	if (!tmp)
+		return -ENOMEM;
 
-checksum_err:
+	ret = nvram_read(tmp, count, ppos);
-	spin_unlock_irq(&rtc_lock);
+	if (ret <= 0)
-	return -EIO;
+		goto out;
+
+	if (copy_to_user(buf, tmp, ret)) {
+		*ppos -= ret;
+		ret = -EFAULT;
+	}
+
+out:
+	kfree(tmp);
+	return ret;
 }
 
-static ssize_t nvram_write(struct file *file, const char __user *buf,
+static ssize_t nvram_misc_write(struct file *file, const char __user *buf,
-						size_t count, loff_t *ppos)
+				size_t count, loff_t *ppos)
 {
-	unsigned char contents[NVRAM_BYTES];
+	char *tmp;
-	unsigned i = *ppos;
+	ssize_t ret;
-	unsigned char *tmp;
 
-	if (i >= NVRAM_BYTES)
+	if (!access_ok(buf, count))
-		return 0;	/* Past EOF */
-
-	if (count > NVRAM_BYTES - i)
-		count = NVRAM_BYTES - i;
-	if (count > NVRAM_BYTES)
-		return -EFAULT;	/* Can't happen, but prove it to gcc */
-
-	if (copy_from_user(contents, buf, count))
 		return -EFAULT;
+	if (*ppos >= nvram_size)
+		return 0;
 
-	spin_lock_irq(&rtc_lock);
+	count = min_t(size_t, count, nvram_size - *ppos);
+	count = min_t(size_t, count, PAGE_SIZE);
 
-	if (!__nvram_check_checksum())
+	tmp = memdup_user(buf, count);
-		goto checksum_err;
+	if (IS_ERR(tmp))
+		return PTR_ERR(tmp);
 
-	for (tmp = contents; count--; ++i, ++tmp)
+	ret = nvram_write(tmp, count, ppos);
-		__nvram_write_byte(*tmp, i);
+	kfree(tmp);
-
+	return ret;
-	__nvram_set_checksum();
-
-	spin_unlock_irq(&rtc_lock);
-
-	*ppos = i;
-
-	return tmp - contents;
-
-checksum_err:
-	spin_unlock_irq(&rtc_lock);
-	return -EIO;
 }
 
-static long nvram_ioctl(struct file *file, unsigned int cmd,
+static long nvram_misc_ioctl(struct file *file, unsigned int cmd,
-			unsigned long arg)
+			     unsigned long arg)
 {
-	int i;
+	long ret = -ENOTTY;
 
 	switch (cmd) {
+#ifdef CONFIG_PPC
+	case OBSOLETE_PMAC_NVRAM_GET_OFFSET:
+		pr_warn("nvram: Using obsolete PMAC_NVRAM_GET_OFFSET ioctl\n");
+		/* fall through */
+	case IOC_NVRAM_GET_OFFSET:
+		ret = -EINVAL;
+#ifdef CONFIG_PPC_PMAC
+		if (machine_is(powermac)) {
+			int part, offset;
 
+			if (copy_from_user(&part, (void __user *)arg,
+					   sizeof(part)) != 0)
+				return -EFAULT;
+			if (part < pmac_nvram_OF || part > pmac_nvram_NR)
+				return -EINVAL;
+			offset = pmac_get_partition(part);
+			if (offset < 0)
+				return -EINVAL;
+			if (copy_to_user((void __user *)arg,
+					 &offset, sizeof(offset)) != 0)
+				return -EFAULT;
+			ret = 0;
+		}
+#endif
+		break;
+#ifdef CONFIG_PPC32
+	case IOC_NVRAM_SYNC:
+		if (ppc_md.nvram_sync != NULL) {
+			mutex_lock(&nvram_mutex);
+			ppc_md.nvram_sync();
+			mutex_unlock(&nvram_mutex);
+		}
+		ret = 0;
+		break;
+#endif
+#elif defined(CONFIG_X86) || defined(CONFIG_M68K)
 	case NVRAM_INIT:
 		/* initialize NVRAM contents and checksum */
 		if (!capable(CAP_SYS_ADMIN))
 			return -EACCES;
 
-		mutex_lock(&nvram_mutex);
+		if (arch_nvram_ops.initialize != NULL) {
-		spin_lock_irq(&rtc_lock);
+			mutex_lock(&nvram_mutex);
-
+			ret = arch_nvram_ops.initialize();
-		for (i = 0; i < NVRAM_BYTES; ++i)
+			mutex_unlock(&nvram_mutex);
-			__nvram_write_byte(0, i);
+		}
-		__nvram_set_checksum();
+		break;
-
-		spin_unlock_irq(&rtc_lock);
-		mutex_unlock(&nvram_mutex);
-		return 0;
-
 	case NVRAM_SETCKS:
 		/* just set checksum, contents unchanged (maybe useful after
 		 * checksum garbaged somehow...) */
 		if (!capable(CAP_SYS_ADMIN))
 			return -EACCES;
 
-		mutex_lock(&nvram_mutex);
+		if (arch_nvram_ops.set_checksum != NULL) {
-		spin_lock_irq(&rtc_lock);
+			mutex_lock(&nvram_mutex);
-		__nvram_set_checksum();
+			ret = arch_nvram_ops.set_checksum();
-		spin_unlock_irq(&rtc_lock);
+			mutex_unlock(&nvram_mutex);
-		mutex_unlock(&nvram_mutex);
+		}
-		return 0;
+		break;
-
+#endif /* CONFIG_X86 || CONFIG_M68K */
-	default:
-		return -ENOTTY;
 	}
+	return ret;
 }
 
-static int nvram_open(struct inode *inode, struct file *file)
+static int nvram_misc_open(struct inode *inode, struct file *file)
 {
 	spin_lock(&nvram_state_lock);
 
+	/* Prevent multiple readers/writers if desired. */
 	if ((nvram_open_cnt && (file->f_flags & O_EXCL)) ||
-	    (nvram_open_mode & NVRAM_EXCL) ||
+	    (nvram_open_mode & NVRAM_EXCL)) {
-	    ((file->f_mode & FMODE_WRITE) && (nvram_open_mode & NVRAM_WRITE))) {
 		spin_unlock(&nvram_state_lock);
 		return -EBUSY;
 	}
 
+#if defined(CONFIG_X86) || defined(CONFIG_M68K)
+	/* Prevent multiple writers if the set_checksum ioctl is implemented. */
+	if ((arch_nvram_ops.set_checksum != NULL) &&
+	    (file->f_mode & FMODE_WRITE) && (nvram_open_mode & NVRAM_WRITE)) {
+		spin_unlock(&nvram_state_lock);
+		return -EBUSY;
+	}
+#endif
+
 	if (file->f_flags & O_EXCL)
 		nvram_open_mode |= NVRAM_EXCL;
 	if (file->f_mode & FMODE_WRITE)
@@ -349,7 +381,7 @@ static int nvram_open(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static int nvram_release(struct inode *inode, struct file *file)
+static int nvram_misc_release(struct inode *inode, struct file *file)
 {
 	spin_lock(&nvram_state_lock);
 
@@ -366,123 +398,7 @@ static int nvram_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-#ifndef CONFIG_PROC_FS
+#if defined(CONFIG_X86) && defined(CONFIG_PROC_FS)
-static int nvram_add_proc_fs(void)
-{
-	return 0;
-}
-
-#else
-
-static int nvram_proc_read(struct seq_file *seq, void *offset)
-{
-	unsigned char contents[NVRAM_BYTES];
-	int i = 0;
-
-	spin_lock_irq(&rtc_lock);
-	for (i = 0; i < NVRAM_BYTES; ++i)
-		contents[i] = __nvram_read_byte(i);
-	spin_unlock_irq(&rtc_lock);
-
-	mach_proc_infos(contents, seq, offset);
-
-	return 0;
-}
-
-static int nvram_add_proc_fs(void)
-{
-	if (!proc_create_single("driver/nvram", 0, NULL, nvram_proc_read))
-		return -ENOMEM;
-	return 0;
-}
-
-#endif /* CONFIG_PROC_FS */
-
-static const struct file_operations nvram_fops = {
-	.owner		= THIS_MODULE,
-	.llseek		= nvram_llseek,
-	.read		= nvram_read,
-	.write		= nvram_write,
-	.unlocked_ioctl	= nvram_ioctl,
-	.open		= nvram_open,
-	.release	= nvram_release,
-};
-
-static struct miscdevice nvram_dev = {
-	NVRAM_MINOR,
-	"nvram",
-	&nvram_fops
-};
-
-static int __init nvram_init(void)
-{
-	int ret;
-
-	/* First test whether the driver should init at all */
-	if (!CHECK_DRIVER_INIT())
-		return -ENODEV;
-
-	ret = misc_register(&nvram_dev);
-	if (ret) {
-		printk(KERN_ERR "nvram: can't misc_register on minor=%d\n",
-		    NVRAM_MINOR);
-		goto out;
-	}
-	ret = nvram_add_proc_fs();
-	if (ret) {
-		printk(KERN_ERR "nvram: can't create /proc/driver/nvram\n");
-		goto outmisc;
-	}
-	ret = 0;
-	printk(KERN_INFO "Non-volatile memory driver v" NVRAM_VERSION "\n");
-out:
-	return ret;
-outmisc:
-	misc_deregister(&nvram_dev);
-	goto out;
-}
-
-static void __exit nvram_cleanup_module(void)
-{
-	remove_proc_entry("driver/nvram", NULL);
-	misc_deregister(&nvram_dev);
-}
-
-module_init(nvram_init);
-module_exit(nvram_cleanup_module);
-
-/*
- * Machine specific functions
- */
-
-#if MACH == PC
-
-static int pc_check_checksum(void)
-{
-	int i;
-	unsigned short sum = 0;
-	unsigned short expect;
-
-	for (i = PC_CKS_RANGE_START; i <= PC_CKS_RANGE_END; ++i)
-		sum += __nvram_read_byte(i);
-	expect = __nvram_read_byte(PC_CKS_LOC)<<8 |
-	    __nvram_read_byte(PC_CKS_LOC+1);
-	return (sum & 0xffff) == expect;
-}
-
-static void pc_set_checksum(void)
-{
-	int i;
-	unsigned short sum = 0;
-
-	for (i = PC_CKS_RANGE_START; i <= PC_CKS_RANGE_END; ++i)
-		sum += __nvram_read_byte(i);
-	__nvram_write_byte(sum >> 8, PC_CKS_LOC);
-	__nvram_write_byte(sum & 0xff, PC_CKS_LOC + 1);
-}
-
-#ifdef CONFIG_PROC_FS
-
 static const char * const floppy_types[] = {
 	"none", "5.25'' 360k", "5.25'' 1.2M", "3.5'' 720k", "3.5'' 1.44M",
 	"3.5'' 2.88M", "3.5'' 2.88M"
@@ -495,8 +411,8 @@ static const char * const gfx_types[] = {
 	"monochrome",
 };
 
-static void pc_proc_infos(unsigned char *nvram, struct seq_file *seq,
+static void pc_nvram_proc_read(unsigned char *nvram, struct seq_file *seq,
-								void *offset)
+			       void *offset)
 {
 	int checksum;
 	int type;
@@ -557,143 +473,76 @@ static void pc_proc_infos(unsigned char *nvram, struct seq_file *seq,
 
 	return;
 }
-#endif
 
-#endif /* MACH == PC */
+static int nvram_proc_read(struct seq_file *seq, void *offset)
-
-#if MACH == ATARI
-
-static int atari_check_checksum(void)
 {
-	int i;
+	unsigned char contents[NVRAM_BYTES];
-	unsigned char sum = 0;
+	int i = 0;
 
-	for (i = ATARI_CKS_RANGE_START; i <= ATARI_CKS_RANGE_END; ++i)
+	spin_lock_irq(&rtc_lock);
-		sum += __nvram_read_byte(i);
+	for (i = 0; i < NVRAM_BYTES; ++i)
-	return (__nvram_read_byte(ATARI_CKS_LOC) == (~sum & 0xff)) &&
+		contents[i] = __nvram_read_byte(i);
-	    (__nvram_read_byte(ATARI_CKS_LOC + 1) == (sum & 0xff));
+	spin_unlock_irq(&rtc_lock);
+
+	pc_nvram_proc_read(contents, seq, offset);
+
+	return 0;
 }
+#endif /* CONFIG_X86 && CONFIG_PROC_FS */
 
-static void atari_set_checksum(void)
+static const struct file_operations nvram_misc_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= nvram_misc_llseek,
+	.read		= nvram_misc_read,
+	.write		= nvram_misc_write,
+	.unlocked_ioctl	= nvram_misc_ioctl,
+	.open		= nvram_misc_open,
+	.release	= nvram_misc_release,
+};
+
+static struct miscdevice nvram_misc = {
+	NVRAM_MINOR,
+	"nvram",
+	&nvram_misc_fops,
+};
+
+static int __init nvram_module_init(void)
 {
-	int i;
+	int ret;
-	unsigned char sum = 0;
 
-	for (i = ATARI_CKS_RANGE_START; i <= ATARI_CKS_RANGE_END; ++i)
+	nvram_size = nvram_get_size();
-		sum += __nvram_read_byte(i);
+	if (nvram_size < 0)
-	__nvram_write_byte(~sum, ATARI_CKS_LOC);
+		return nvram_size;
-	__nvram_write_byte(sum, ATARI_CKS_LOC + 1);
-}
 
-#ifdef CONFIG_PROC_FS
+	ret = misc_register(&nvram_misc);
-
+	if (ret) {
-static struct {
+		pr_err("nvram: can't misc_register on minor=%d\n", NVRAM_MINOR);
-	unsigned char val;
+		return ret;
-	const char *name;
-} boot_prefs[] = {
-	{ 0x80, "TOS" },
-	{ 0x40, "ASV" },
-	{ 0x20, "NetBSD (?)" },
-	{ 0x10, "Linux" },
-	{ 0x00, "unspecified" }
-};
-
-static const char * const languages[] = {
-	"English (US)",
-	"German",
-	"French",
-	"English (UK)",
-	"Spanish",
-	"Italian",
-	"6 (undefined)",
-	"Swiss (French)",
-	"Swiss (German)"
-};
-
-static const char * const dateformat[] = {
-	"MM%cDD%cYY",
-	"DD%cMM%cYY",
-	"YY%cMM%cDD",
-	"YY%cDD%cMM",
-	"4 (undefined)",
-	"5 (undefined)",
-	"6 (undefined)",
-	"7 (undefined)"
-};
-
-static const char * const colors[] = {
-	"2", "4", "16", "256", "65536", "??", "??", "??"
-};
-
-static void atari_proc_infos(unsigned char *nvram, struct seq_file *seq,
-								void *offset)
-{
-	int checksum = nvram_check_checksum();
-	int i;
-	unsigned vmode;
-
-	seq_printf(seq, "Checksum status  : %svalid\n", checksum ? "" : "not ");
-
-	seq_printf(seq, "Boot preference  : ");
-	for (i = ARRAY_SIZE(boot_prefs) - 1; i >= 0; --i) {
-		if (nvram[1] == boot_prefs[i].val) {
-			seq_printf(seq, "%s\n", boot_prefs[i].name);
-			break;
-		}
 	}
-	if (i < 0)
-		seq_printf(seq, "0x%02x (undefined)\n", nvram[1]);
 
-	seq_printf(seq, "SCSI arbitration : %s\n",
+#if defined(CONFIG_X86) && defined(CONFIG_PROC_FS)
-	    (nvram[16] & 0x80) ? "on" : "off");
+	if (!proc_create_single("driver/nvram", 0, NULL, nvram_proc_read)) {
-	seq_printf(seq, "SCSI host ID     : ");
+		pr_err("nvram: can't create /proc/driver/nvram\n");
-	if (nvram[16] & 0x80)
+		misc_deregister(&nvram_misc);
-		seq_printf(seq, "%d\n", nvram[16] & 7);
+		return -ENOMEM;
-	else
+	}
-		seq_printf(seq, "n/a\n");
-
-	/* the following entries are defined only for the Falcon */
-	if ((atari_mch_cookie >> 16) != ATARI_MCH_FALCON)
-		return;
-
-	seq_printf(seq, "OS language      : ");
-	if (nvram[6] < ARRAY_SIZE(languages))
-		seq_printf(seq, "%s\n", languages[nvram[6]]);
-	else
-		seq_printf(seq, "%u (undefined)\n", nvram[6]);
-	seq_printf(seq, "Keyboard language: ");
-	if (nvram[7] < ARRAY_SIZE(languages))
-		seq_printf(seq, "%s\n", languages[nvram[7]]);
-	else
-		seq_printf(seq, "%u (undefined)\n", nvram[7]);
-	seq_printf(seq, "Date format      : ");
-	seq_printf(seq, dateformat[nvram[8] & 7],
-	    nvram[9] ? nvram[9] : '/', nvram[9] ? nvram[9] : '/');
-	seq_printf(seq, ", %dh clock\n", nvram[8] & 16 ? 24 : 12);
-	seq_printf(seq, "Boot delay       : ");
-	if (nvram[10] == 0)
-		seq_printf(seq, "default");
-	else
-		seq_printf(seq, "%ds%s\n", nvram[10],
-		    nvram[10] < 8 ? ", no memory test" : "");
-
-	vmode = (nvram[14] << 8) | nvram[15];
-	seq_printf(seq,
-	    "Video mode       : %s colors, %d columns, %s %s monitor\n",
-	    colors[vmode & 7],
-	    vmode & 8 ? 80 : 40,
-	    vmode & 16 ? "VGA" : "TV", vmode & 32 ? "PAL" : "NTSC");
-	seq_printf(seq, "                   %soverscan, compat. mode %s%s\n",
-	    vmode & 64 ? "" : "no ",
-	    vmode & 128 ? "on" : "off",
-	    vmode & 256 ?
-	    (vmode & 16 ? ", line doubling" : ", half screen") : "");
-
-	return;
-}
 #endif
 
-#endif /* MACH == ATARI */
+	pr_info("Non-volatile memory driver v" NVRAM_VERSION "\n");
+	return 0;
+}
+
+static void __exit nvram_module_exit(void)
+{
+#if defined(CONFIG_X86) && defined(CONFIG_PROC_FS)
+	remove_proc_entry("driver/nvram", NULL);
+#endif
+	misc_deregister(&nvram_misc);
+}
+
+module_init(nvram_module_init);
+module_exit(nvram_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(NVRAM_MINOR);
+MODULE_ALIAS("devname:nvram");

drivers/extcon/Kconfig

@@ -114,6 +114,14 @@ config EXTCON_PALMAS
 	  Say Y here to enable support for USB peripheral and USB host
 	  detection by palmas usb.
 
+config EXTCON_PTN5150
+	tristate "NXP PTN5150 CC LOGIC USB EXTCON support"
+	depends on I2C && GPIOLIB || COMPILE_TEST
+	select REGMAP_I2C
+	help
+	  Say Y here to enable support for USB peripheral and USB host
+	  detection by NXP PTN5150 CC (Configuration Channel) logic chip.
+
 config EXTCON_QCOM_SPMI_MISC
 	tristate "Qualcomm USB extcon support"
 	depends on ARCH_QCOM || COMPILE_TEST

drivers/extcon/Makefile

@@ -17,6 +17,7 @@ obj-$(CONFIG_EXTCON_MAX77693)	+= extcon-max77693.o
 obj-$(CONFIG_EXTCON_MAX77843)	+= extcon-max77843.o
 obj-$(CONFIG_EXTCON_MAX8997)	+= extcon-max8997.o
 obj-$(CONFIG_EXTCON_PALMAS)	+= extcon-palmas.o
+obj-$(CONFIG_EXTCON_PTN5150)	+= extcon-ptn5150.o
 obj-$(CONFIG_EXTCON_QCOM_SPMI_MISC) += extcon-qcom-spmi-misc.o
 obj-$(CONFIG_EXTCON_RT8973A)	+= extcon-rt8973a.o
 obj-$(CONFIG_EXTCON_SM5502)	+= extcon-sm5502.o

drivers/extcon/extcon-ptn5150.c

@@ -0,0 +1,339 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// extcon-ptn5150.c - PTN5150 CC logic extcon driver to support USB detection
+//
+// Based on extcon-sm5502.c driver
+// Copyright (c) 2018-2019 by Vijai Kumar K
+// Author: Vijai Kumar K <vijaikumar.kanagarajan@gmail.com>
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/extcon-provider.h>
+#include <linux/gpio/consumer.h>
+
+/* PTN5150 registers */
+enum ptn5150_reg {
+	PTN5150_REG_DEVICE_ID = 0x01,
+	PTN5150_REG_CONTROL,
+	PTN5150_REG_INT_STATUS,
+	PTN5150_REG_CC_STATUS,
+	PTN5150_REG_CON_DET = 0x09,
+	PTN5150_REG_VCONN_STATUS,
+	PTN5150_REG_RESET,
+	PTN5150_REG_INT_MASK = 0x18,
+	PTN5150_REG_INT_REG_STATUS,
+	PTN5150_REG_END,
+};
+
+#define PTN5150_DFP_ATTACHED			0x1
+#define PTN5150_UFP_ATTACHED			0x2
+
+/* Define PTN5150 MASK/SHIFT constant */
+#define PTN5150_REG_DEVICE_ID_VENDOR_SHIFT	0
+#define PTN5150_REG_DEVICE_ID_VENDOR_MASK	\
+	(0x3 << PTN5150_REG_DEVICE_ID_VENDOR_SHIFT)
+
+#define PTN5150_REG_DEVICE_ID_VERSION_SHIFT	3
+#define PTN5150_REG_DEVICE_ID_VERSION_MASK	\
+	(0x1f << PTN5150_REG_DEVICE_ID_VERSION_SHIFT)
+
+#define PTN5150_REG_CC_PORT_ATTACHMENT_SHIFT	2
+#define PTN5150_REG_CC_PORT_ATTACHMENT_MASK	\
+	(0x7 << PTN5150_REG_CC_PORT_ATTACHMENT_SHIFT)
+
+#define PTN5150_REG_CC_VBUS_DETECTION_SHIFT	7
+#define PTN5150_REG_CC_VBUS_DETECTION_MASK	\
+	(0x1 << PTN5150_REG_CC_VBUS_DETECTION_SHIFT)
+
+#define PTN5150_REG_INT_CABLE_ATTACH_SHIFT	0
+#define PTN5150_REG_INT_CABLE_ATTACH_MASK	\
+	(0x1 << PTN5150_REG_INT_CABLE_ATTACH_SHIFT)
+
+#define PTN5150_REG_INT_CABLE_DETACH_SHIFT	1
+#define PTN5150_REG_INT_CABLE_DETACH_MASK	\
+	(0x1 << PTN5150_REG_CC_CABLE_DETACH_SHIFT)
+
+struct ptn5150_info {
+	struct device *dev;
+	struct extcon_dev *edev;
+	struct i2c_client *i2c;
+	struct regmap *regmap;
+	struct gpio_desc *int_gpiod;
+	struct gpio_desc *vbus_gpiod;
+	int irq;
+	struct work_struct irq_work;
+	struct mutex mutex;
+};
+
+/* List of detectable cables */
+static const unsigned int ptn5150_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_NONE,
+};
+
+static const struct regmap_config ptn5150_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.max_register	= PTN5150_REG_END,
+};
+
+static void ptn5150_irq_work(struct work_struct *work)
+{
+	struct ptn5150_info *info = container_of(work,
+			struct ptn5150_info, irq_work);
+	int ret = 0;
+	unsigned int reg_data;
+	unsigned int int_status;
+
+	if (!info->edev)
+		return;
+
+	mutex_lock(&info->mutex);
+
+	ret = regmap_read(info->regmap, PTN5150_REG_CC_STATUS, &reg_data);
+	if (ret) {
+		dev_err(info->dev, "failed to read CC STATUS %d\n", ret);
+		mutex_unlock(&info->mutex);
+		return;
+	}
+
+	/* Clear interrupt. Read would clear the register */
+	ret = regmap_read(info->regmap, PTN5150_REG_INT_STATUS, &int_status);
+	if (ret) {
+		dev_err(info->dev, "failed to read INT STATUS %d\n", ret);
+		mutex_unlock(&info->mutex);
+		return;
+	}
+
+	if (int_status) {
+		unsigned int cable_attach;
+
+		cable_attach = int_status & PTN5150_REG_INT_CABLE_ATTACH_MASK;
+		if (cable_attach) {
+			unsigned int port_status;
+			unsigned int vbus;
+
+			port_status = ((reg_data &
+					PTN5150_REG_CC_PORT_ATTACHMENT_MASK) >>
+					PTN5150_REG_CC_PORT_ATTACHMENT_SHIFT);
+
+			switch (port_status) {
+			case PTN5150_DFP_ATTACHED:
+				extcon_set_state_sync(info->edev,
+						EXTCON_USB_HOST, false);
+				gpiod_set_value(info->vbus_gpiod, 0);
+				extcon_set_state_sync(info->edev, EXTCON_USB,
+						true);
+				break;
+			case PTN5150_UFP_ATTACHED:
+				extcon_set_state_sync(info->edev, EXTCON_USB,
+						false);
+				vbus = ((reg_data &
+					PTN5150_REG_CC_VBUS_DETECTION_MASK) >>
+					PTN5150_REG_CC_VBUS_DETECTION_SHIFT);
+				if (vbus)
+					gpiod_set_value(info->vbus_gpiod, 0);
+				else
+					gpiod_set_value(info->vbus_gpiod, 1);
+
+				extcon_set_state_sync(info->edev,
+						EXTCON_USB_HOST, true);
+				break;
+			default:
+				dev_err(info->dev,
+					"Unknown Port status : %x\n",
+					port_status);
+				break;
+			}
+		} else {
+			extcon_set_state_sync(info->edev,
+					EXTCON_USB_HOST, false);
+			extcon_set_state_sync(info->edev,
+					EXTCON_USB, false);
+			gpiod_set_value(info->vbus_gpiod, 0);
+		}
+	}
+
+	/* Clear interrupt. Read would clear the register */
+	ret = regmap_read(info->regmap, PTN5150_REG_INT_REG_STATUS,
+			&int_status);
+	if (ret) {
+		dev_err(info->dev,
+			"failed to read INT REG STATUS %d\n", ret);
+		mutex_unlock(&info->mutex);
+		return;
+	}
+
+	mutex_unlock(&info->mutex);
+}
+
+
+static irqreturn_t ptn5150_irq_handler(int irq, void *data)
+{
+	struct ptn5150_info *info = data;
+
+	schedule_work(&info->irq_work);
+
+	return IRQ_HANDLED;
+}
+
+static int ptn5150_init_dev_type(struct ptn5150_info *info)
+{
+	unsigned int reg_data, vendor_id, version_id;
+	int ret;
+
+	ret = regmap_read(info->regmap, PTN5150_REG_DEVICE_ID, &reg_data);
+	if (ret) {
+		dev_err(info->dev, "failed to read DEVICE_ID %d\n", ret);
+		return -EINVAL;
+	}
+
+	vendor_id = ((reg_data & PTN5150_REG_DEVICE_ID_VENDOR_MASK) >>
+				PTN5150_REG_DEVICE_ID_VENDOR_SHIFT);
+	version_id = ((reg_data & PTN5150_REG_DEVICE_ID_VERSION_MASK) >>
+				PTN5150_REG_DEVICE_ID_VERSION_SHIFT);
+
+	dev_info(info->dev, "Device type: version: 0x%x, vendor: 0x%x\n",
+			    version_id, vendor_id);
+
+	/* Clear any existing interrupts */
+	ret = regmap_read(info->regmap, PTN5150_REG_INT_STATUS, &reg_data);
+	if (ret) {
+		dev_err(info->dev,
+			"failed to read PTN5150_REG_INT_STATUS %d\n",
+			ret);
+		return -EINVAL;
+	}
+
+	ret = regmap_read(info->regmap, PTN5150_REG_INT_REG_STATUS, &reg_data);
+	if (ret) {
+		dev_err(info->dev,
+			"failed to read PTN5150_REG_INT_REG_STATUS %d\n", ret);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ptn5150_i2c_probe(struct i2c_client *i2c,
+				 const struct i2c_device_id *id)
+{
+	struct device *dev = &i2c->dev;
+	struct device_node *np = i2c->dev.of_node;
+	struct ptn5150_info *info;
+	int ret;
+
+	if (!np)
+		return -EINVAL;
+
+	info = devm_kzalloc(&i2c->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+	i2c_set_clientdata(i2c, info);
+
+	info->dev = &i2c->dev;
+	info->i2c = i2c;
+	info->int_gpiod = devm_gpiod_get(&i2c->dev, "int", GPIOD_IN);
+	if (IS_ERR(info->int_gpiod)) {
+		dev_err(dev, "failed to get INT GPIO\n");
+		return PTR_ERR(info->int_gpiod);
+	}
+	info->vbus_gpiod = devm_gpiod_get(&i2c->dev, "vbus", GPIOD_IN);
+	if (IS_ERR(info->vbus_gpiod)) {
+		dev_err(dev, "failed to get VBUS GPIO\n");
+		return PTR_ERR(info->vbus_gpiod);
+	}
+	ret = gpiod_direction_output(info->vbus_gpiod, 0);
+	if (ret) {
+		dev_err(dev, "failed to set VBUS GPIO direction\n");
+		return -EINVAL;
+	}
+
+	mutex_init(&info->mutex);
+
+	INIT_WORK(&info->irq_work, ptn5150_irq_work);
+
+	info->regmap = devm_regmap_init_i2c(i2c, &ptn5150_regmap_config);
+	if (IS_ERR(info->regmap)) {
+		ret = PTR_ERR(info->regmap);
+		dev_err(info->dev, "failed to allocate register map: %d\n",
+				   ret);
+		return ret;
+	}
+
+	if (info->int_gpiod) {
+		info->irq = gpiod_to_irq(info->int_gpiod);
+		if (info->irq < 0) {
+			dev_err(dev, "failed to get INTB IRQ\n");
+			return info->irq;
+		}
+
+		ret = devm_request_threaded_irq(dev, info->irq, NULL,
+						ptn5150_irq_handler,
+						IRQF_TRIGGER_FALLING |
+						IRQF_ONESHOT,
+						i2c->name, info);
+		if (ret < 0) {
+			dev_err(dev, "failed to request handler for INTB IRQ\n");
+			return ret;
+		}
+	}
+
+	/* Allocate extcon device */
+	info->edev = devm_extcon_dev_allocate(info->dev, ptn5150_extcon_cable);
+	if (IS_ERR(info->edev)) {
+		dev_err(info->dev, "failed to allocate memory for extcon\n");
+		return -ENOMEM;
+	}
+
+	/* Register extcon device */
+	ret = devm_extcon_dev_register(info->dev, info->edev);
+	if (ret) {
+		dev_err(info->dev, "failed to register extcon device\n");
+		return ret;
+	}
+
+	/* Initialize PTN5150 device and print vendor id and version id */
+	ret = ptn5150_init_dev_type(info);
+	if (ret)
+		return -EINVAL;
+
+	return 0;
+}
+
+static const struct of_device_id ptn5150_dt_match[] = {
+	{ .compatible = "nxp,ptn5150" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ptn5150_dt_match);
+
+static const struct i2c_device_id ptn5150_i2c_id[] = {
+	{ "ptn5150", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ptn5150_i2c_id);
+
+static struct i2c_driver ptn5150_i2c_driver = {
+	.driver		= {
+		.name	= "ptn5150",
+		.of_match_table = ptn5150_dt_match,
+	},
+	.probe	= ptn5150_i2c_probe,
+	.id_table = ptn5150_i2c_id,
+};
+
+static int __init ptn5150_i2c_init(void)
+{
+	return i2c_add_driver(&ptn5150_i2c_driver);
+}
+subsys_initcall(ptn5150_i2c_init);
+
+MODULE_DESCRIPTION("NXP PTN5150 CC logic Extcon driver");
+MODULE_AUTHOR("Vijai Kumar K <vijaikumar.kanagarajan@gmail.com>");
+MODULE_LICENSE("GPL v2");

drivers/fpga/Kconfig

@@ -104,7 +104,7 @@ config SOCFPGA_FPGA_BRIDGE
 
 config ALTERA_FREEZE_BRIDGE
 	tristate "Altera FPGA Freeze Bridge"
-	depends on ARCH_SOCFPGA && FPGA_BRIDGE
+	depends on FPGA_BRIDGE && HAS_IOMEM
 	help
 	  Say Y to enable drivers for Altera FPGA Freeze bridges.  A
 	  freeze bridge is a bridge that exists in the FPGA fabric to

drivers/fpga/altera-ps-spi.c

@@ -205,7 +205,7 @@ static int altera_ps_write_complete(struct fpga_manager *mgr,
 				    struct fpga_image_info *info)
 {
 	struct altera_ps_conf *conf = mgr->priv;
-	const char dummy[] = {0};
+	static const char dummy[] = {0};
 	int ret;
 
 	if (gpiod_get_value_cansleep(conf->status)) {

drivers/gnss/Kconfig

@@ -15,6 +15,19 @@ if GNSS
 config GNSS_SERIAL
 	tristate
 
+config GNSS_MTK_SERIAL
+	tristate "Mediatek GNSS receiver support"
+	depends on SERIAL_DEV_BUS
+	select GNSS_SERIAL
+	help
+	  Say Y here if you have a Mediatek-based GNSS receiver which uses a
+	  serial interface.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called gnss-mtk.
+
+	  If unsure, say N.
+
 config GNSS_SIRF_SERIAL
 	tristate "SiRFstar GNSS receiver support"
 	depends on SERIAL_DEV_BUS

drivers/gnss/Makefile

@@ -9,6 +9,9 @@ gnss-y := core.o
 obj-$(CONFIG_GNSS_SERIAL)		+= gnss-serial.o
 gnss-serial-y := serial.o
 
+obj-$(CONFIG_GNSS_MTK_SERIAL)		+= gnss-mtk.o
+gnss-mtk-y := mtk.o
+
 obj-$(CONFIG_GNSS_SIRF_SERIAL)		+= gnss-sirf.o
 gnss-sirf-y := sirf.o
 

drivers/gnss/core.c

@@ -334,6 +334,7 @@ static const char * const gnss_type_names[GNSS_TYPE_COUNT] = {
 	[GNSS_TYPE_NMEA]	= "NMEA",
 	[GNSS_TYPE_SIRF]	= "SiRF",
 	[GNSS_TYPE_UBX]		= "UBX",
+	[GNSS_TYPE_MTK]		= "MTK",
 };
 
 static const char *gnss_type_name(struct gnss_device *gdev)

drivers/gnss/mtk.c

@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Mediatek GNSS receiver driver
+ *
+ * Copyright (C) 2018 Johan Hovold <johan@kernel.org>
+ */
+
+#include <linux/errno.h>
+#include <linux/gnss.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+#include <linux/serdev.h>
+
+#include "serial.h"
+
+struct mtk_data {
+	struct regulator *vbackup;
+	struct regulator *vcc;
+};
+
+static int mtk_set_active(struct gnss_serial *gserial)
+{
+	struct mtk_data *data = gnss_serial_get_drvdata(gserial);
+	int ret;
+
+	ret = regulator_enable(data->vcc);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int mtk_set_standby(struct gnss_serial *gserial)
+{
+	struct mtk_data *data = gnss_serial_get_drvdata(gserial);
+	int ret;
+
+	ret = regulator_disable(data->vcc);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int mtk_set_power(struct gnss_serial *gserial,
+			 enum gnss_serial_pm_state state)
+{
+	switch (state) {
+	case GNSS_SERIAL_ACTIVE:
+		return mtk_set_active(gserial);
+	case GNSS_SERIAL_OFF:
+	case GNSS_SERIAL_STANDBY:
+		return mtk_set_standby(gserial);
+	}
+
+	return -EINVAL;
+}
+
+static const struct gnss_serial_ops mtk_gserial_ops = {
+	.set_power = mtk_set_power,
+};
+
+static int mtk_probe(struct serdev_device *serdev)
+{
+	struct gnss_serial *gserial;
+	struct mtk_data *data;
+	int ret;
+
+	gserial = gnss_serial_allocate(serdev, sizeof(*data));
+	if (IS_ERR(gserial)) {
+		ret = PTR_ERR(gserial);
+		return ret;
+	}
+
+	gserial->ops = &mtk_gserial_ops;
+
+	gserial->gdev->type = GNSS_TYPE_MTK;
+
+	data = gnss_serial_get_drvdata(gserial);
+
+	data->vcc = devm_regulator_get(&serdev->dev, "vcc");
+	if (IS_ERR(data->vcc)) {
+		ret = PTR_ERR(data->vcc);
+		goto err_free_gserial;
+	}
+
+	data->vbackup = devm_regulator_get_optional(&serdev->dev, "vbackup");
+	if (IS_ERR(data->vbackup)) {
+		ret = PTR_ERR(data->vbackup);
+		if (ret == -ENODEV)
+			data->vbackup = NULL;
+		else
+			goto err_free_gserial;
+	}
+
+	if (data->vbackup) {
+		ret = regulator_enable(data->vbackup);
+		if (ret)
+			goto err_free_gserial;
+	}
+
+	ret = gnss_serial_register(gserial);
+	if (ret)
+		goto err_disable_vbackup;
+
+	return 0;
+
+err_disable_vbackup:
+	if (data->vbackup)
+		regulator_disable(data->vbackup);
+err_free_gserial:
+	gnss_serial_free(gserial);
+
+	return ret;
+}
+
+static void mtk_remove(struct serdev_device *serdev)
+{
+	struct gnss_serial *gserial = serdev_device_get_drvdata(serdev);
+	struct mtk_data *data = gnss_serial_get_drvdata(gserial);
+
+	gnss_serial_deregister(gserial);
+	if (data->vbackup)
+		regulator_disable(data->vbackup);
+	gnss_serial_free(gserial);
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id mtk_of_match[] = {
+	{ .compatible = "globaltop,pa6h" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mtk_of_match);
+#endif
+
+static struct serdev_device_driver mtk_driver = {
+	.driver	= {
+		.name		= "gnss-mtk",
+		.of_match_table	= of_match_ptr(mtk_of_match),
+		.pm		= &gnss_serial_pm_ops,
+	},
+	.probe	= mtk_probe,
+	.remove	= mtk_remove,
+};
+module_serdev_device_driver(mtk_driver);
+
+MODULE_AUTHOR("Loys Ollivier <lollivier@baylibre.com>");
+MODULE_DESCRIPTION("Mediatek GNSS receiver driver");
+MODULE_LICENSE("GPL v2");

drivers/gnss/sirf.c

@@ -25,31 +25,83 @@
 #define SIRF_ON_OFF_PULSE_TIME		100
 #define SIRF_ACTIVATE_TIMEOUT		200
 #define SIRF_HIBERNATE_TIMEOUT		200
+/*
+ * If no data arrives for this time, we assume that the chip is off.
+ * REVISIT: The report cycle is configurable and can be several minutes long,
+ * so this will only work reliably if the report cycle is set to a reasonable
+ * low value. Also power saving settings (like send data only on movement)
+ * might things work even worse.
+ * Workaround might be to parse shutdown or bootup messages.
+ */
+#define SIRF_REPORT_CYCLE	2000
 
 struct sirf_data {
 	struct gnss_device *gdev;
 	struct serdev_device *serdev;
 	speed_t	speed;
 	struct regulator *vcc;
+	struct regulator *lna;
 	struct gpio_desc *on_off;
 	struct gpio_desc *wakeup;
 	int irq;
 	bool active;
+
+	struct mutex gdev_mutex;
+	bool open;
+
+	struct mutex serdev_mutex;
+	int serdev_count;
+
 	wait_queue_head_t power_wait;
 };
 
+static int sirf_serdev_open(struct sirf_data *data)
+{
+	int ret = 0;
+
+	mutex_lock(&data->serdev_mutex);
+	if (++data->serdev_count == 1) {
+		ret = serdev_device_open(data->serdev);
+		if (ret) {
+			data->serdev_count--;
+			goto out_unlock;
+		}
+
+		serdev_device_set_baudrate(data->serdev, data->speed);
+		serdev_device_set_flow_control(data->serdev, false);
+	}
+
+out_unlock:
+	mutex_unlock(&data->serdev_mutex);
+
+	return ret;
+}
+
+static void sirf_serdev_close(struct sirf_data *data)
+{
+	mutex_lock(&data->serdev_mutex);
+	if (--data->serdev_count == 0)
+		serdev_device_close(data->serdev);
+	mutex_unlock(&data->serdev_mutex);
+}
+
 static int sirf_open(struct gnss_device *gdev)
 {
 	struct sirf_data *data = gnss_get_drvdata(gdev);
 	struct serdev_device *serdev = data->serdev;
 	int ret;
 
-	ret = serdev_device_open(serdev);
+	mutex_lock(&data->gdev_mutex);
-	if (ret)
+	data->open = true;
-		return ret;
+	mutex_unlock(&data->gdev_mutex);
 
-	serdev_device_set_baudrate(serdev, data->speed);
+	ret = sirf_serdev_open(data);
-	serdev_device_set_flow_control(serdev, false);
+	if (ret) {
+		mutex_lock(&data->gdev_mutex);
+		data->open = false;
+		mutex_unlock(&data->gdev_mutex);
+		return ret;
+	}
 
 	ret = pm_runtime_get_sync(&serdev->dev);
 	if (ret < 0) {
@@ -61,7 +113,11 @@ static int sirf_open(struct gnss_device *gdev)
 	return 0;
 
 err_close:
-	serdev_device_close(serdev);
+	sirf_serdev_close(data);
+
+	mutex_lock(&data->gdev_mutex);
+	data->open = false;
+	mutex_unlock(&data->gdev_mutex);
 
 	return ret;
 }
@@ -71,9 +127,13 @@ static void sirf_close(struct gnss_device *gdev)
 	struct sirf_data *data = gnss_get_drvdata(gdev);
 	struct serdev_device *serdev = data->serdev;
 
-	serdev_device_close(serdev);
+	sirf_serdev_close(data);
 
 	pm_runtime_put(&serdev->dev);
+
+	mutex_lock(&data->gdev_mutex);
+	data->open = false;
+	mutex_unlock(&data->gdev_mutex);
 }
 
 static int sirf_write_raw(struct gnss_device *gdev, const unsigned char *buf,
@@ -105,8 +165,19 @@ static int sirf_receive_buf(struct serdev_device *serdev,
 {
 	struct sirf_data *data = serdev_device_get_drvdata(serdev);
 	struct gnss_device *gdev = data->gdev;
+	int ret = 0;
 
-	return gnss_insert_raw(gdev, buf, count);
+	if (!data->wakeup && !data->active) {
+		data->active = true;
+		wake_up_interruptible(&data->power_wait);
+	}
+
+	mutex_lock(&data->gdev_mutex);
+	if (data->open)
+		ret = gnss_insert_raw(gdev, buf, count);
+	mutex_unlock(&data->gdev_mutex);
+
+	return ret;
 }
 
 static const struct serdev_device_ops sirf_serdev_ops = {
@@ -125,17 +196,45 @@ static irqreturn_t sirf_wakeup_handler(int irq, void *dev_id)
 	if (ret < 0)
 		goto out;
 
-	data->active = !!ret;
+	data->active = ret;
 	wake_up_interruptible(&data->power_wait);
 out:
 	return IRQ_HANDLED;
 }
 
+static int sirf_wait_for_power_state_nowakeup(struct sirf_data *data,
+						bool active,
+						unsigned long timeout)
+{
+	int ret;
+
+	/* Wait for state change (including any shutdown messages). */
+	msleep(timeout);
+
+	/* Wait for data reception or timeout. */
+	data->active = false;
+	ret = wait_event_interruptible_timeout(data->power_wait,
+			data->active, msecs_to_jiffies(SIRF_REPORT_CYCLE));
+	if (ret < 0)
+		return ret;
+
+	if (ret > 0 && !active)
+		return -ETIMEDOUT;
+
+	if (ret == 0 && active)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
 static int sirf_wait_for_power_state(struct sirf_data *data, bool active,
 					unsigned long timeout)
 {
 	int ret;
 
+	if (!data->wakeup)
+		return sirf_wait_for_power_state_nowakeup(data, active, timeout);
+
 	ret = wait_event_interruptible_timeout(data->power_wait,
 			data->active == active, msecs_to_jiffies(timeout));
 	if (ret < 0)
@@ -168,21 +267,22 @@ static int sirf_set_active(struct sirf_data *data, bool active)
 	else
 		timeout = SIRF_HIBERNATE_TIMEOUT;
 
+	if (!data->wakeup) {
+		ret = sirf_serdev_open(data);
+		if (ret)
+			return ret;
+	}
+
 	do {
 		sirf_pulse_on_off(data);
 		ret = sirf_wait_for_power_state(data, active, timeout);
-		if (ret < 0) {
+	} while (ret == -ETIMEDOUT && retries--);
-			if (ret == -ETIMEDOUT)
-				continue;
 
-			return ret;
+	if (!data->wakeup)
-		}
+		sirf_serdev_close(data);
 
-		break;
+	if (ret)
-	} while (retries--);
+		return ret;
-
-	if (retries < 0)
-		return -ETIMEDOUT;
 
 	return 0;
 }
@@ -190,21 +290,60 @@ static int sirf_set_active(struct sirf_data *data, bool active)
 static int sirf_runtime_suspend(struct device *dev)
 {
 	struct sirf_data *data = dev_get_drvdata(dev);
+	int ret2;
+	int ret;
 
-	if (!data->on_off)
+	if (data->on_off)
-		return regulator_disable(data->vcc);
+		ret = sirf_set_active(data, false);
+	else
+		ret = regulator_disable(data->vcc);
 
-	return sirf_set_active(data, false);
+	if (ret)
+		return ret;
+
+	ret = regulator_disable(data->lna);
+	if (ret)
+		goto err_reenable;
+
+	return 0;
+
+err_reenable:
+	if (data->on_off)
+		ret2 = sirf_set_active(data, true);
+	else
+		ret2 = regulator_enable(data->vcc);
+
+	if (ret2)
+		dev_err(dev,
+			"failed to reenable power on failed suspend: %d\n",
+			ret2);
+
+	return ret;
 }
 
 static int sirf_runtime_resume(struct device *dev)
 {
 	struct sirf_data *data = dev_get_drvdata(dev);
+	int ret;
 
-	if (!data->on_off)
+	ret = regulator_enable(data->lna);
-		return regulator_enable(data->vcc);
+	if (ret)
+		return ret;
 
-	return sirf_set_active(data, true);
+	if (data->on_off)
+		ret = sirf_set_active(data, true);
+	else
+		ret = regulator_enable(data->vcc);
+
+	if (ret)
+		goto err_disable_lna;
+
+	return 0;
+
+err_disable_lna:
+	regulator_disable(data->lna);
+
+	return ret;
 }
 
 static int __maybe_unused sirf_suspend(struct device *dev)
@@ -275,6 +414,8 @@ static int sirf_probe(struct serdev_device *serdev)
 	data->serdev = serdev;
 	data->gdev = gdev;
 
+	mutex_init(&data->gdev_mutex);
+	mutex_init(&data->serdev_mutex);
 	init_waitqueue_head(&data->power_wait);
 
 	serdev_device_set_drvdata(serdev, data);
@@ -290,6 +431,12 @@ static int sirf_probe(struct serdev_device *serdev)
 		goto err_put_device;
 	}
 
+	data->lna = devm_regulator_get(dev, "lna");
+	if (IS_ERR(data->lna)) {
+		ret = PTR_ERR(data->lna);
+		goto err_put_device;
+	}
+
 	data->on_off = devm_gpiod_get_optional(dev, "sirf,onoff",
 			GPIOD_OUT_LOW);
 	if (IS_ERR(data->on_off))
@@ -301,48 +448,62 @@ static int sirf_probe(struct serdev_device *serdev)
 		if (IS_ERR(data->wakeup))
 			goto err_put_device;
 
-		/*
-		 * Configurations where WAKEUP has been left not connected,
-		 * are currently not supported.
-		 */
-		if (!data->wakeup) {
-			dev_err(dev, "no wakeup gpio specified\n");
-			ret = -ENODEV;
-			goto err_put_device;
-		}
-	}
-
-	if (data->wakeup) {
-		ret = gpiod_to_irq(data->wakeup);
-		if (ret < 0)
-			goto err_put_device;
-
-		data->irq = ret;
-
-		ret = devm_request_threaded_irq(dev, data->irq, NULL,
-				sirf_wakeup_handler,
-				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-				"wakeup", data);
-		if (ret)
-			goto err_put_device;
-	}
-
-	if (data->on_off) {
 		ret = regulator_enable(data->vcc);
 		if (ret)
 			goto err_put_device;
 
-		/* Wait for chip to boot into hibernate mode */
+		/* Wait for chip to boot into hibernate mode. */
 		msleep(SIRF_BOOT_DELAY);
 	}
 
+	if (data->wakeup) {
+		ret = gpiod_get_value_cansleep(data->wakeup);
+		if (ret < 0)
+			goto err_disable_vcc;
+		data->active = ret;
+
+		ret = gpiod_to_irq(data->wakeup);
+		if (ret < 0)
+			goto err_disable_vcc;
+		data->irq = ret;
+
+		ret = request_threaded_irq(data->irq, NULL, sirf_wakeup_handler,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				"wakeup", data);
+		if (ret)
+			goto err_disable_vcc;
+	}
+
+	if (data->on_off) {
+		if (!data->wakeup) {
+			data->active = false;
+
+			ret = sirf_serdev_open(data);
+			if (ret)
+				goto err_disable_vcc;
+
+			msleep(SIRF_REPORT_CYCLE);
+			sirf_serdev_close(data);
+		}
+
+		/* Force hibernate mode if already active. */
+		if (data->active) {
+			ret = sirf_set_active(data, false);
+			if (ret) {
+				dev_err(dev, "failed to set hibernate mode: %d\n",
+						ret);
+				goto err_free_irq;
+			}
+		}
+	}
+
 	if (IS_ENABLED(CONFIG_PM)) {
 		pm_runtime_set_suspended(dev);	/* clear runtime_error flag */
 		pm_runtime_enable(dev);
 	} else {
 		ret = sirf_runtime_resume(dev);
 		if (ret < 0)
-			goto err_disable_vcc;
+			goto err_free_irq;
 	}
 
 	ret = gnss_register_device(gdev);
@@ -356,6 +517,9 @@ err_disable_rpm:
 		pm_runtime_disable(dev);
 	else
 		sirf_runtime_suspend(dev);
+err_free_irq:
+	if (data->wakeup)
+		free_irq(data->irq, data);
 err_disable_vcc:
 	if (data->on_off)
 		regulator_disable(data->vcc);
@@ -376,6 +540,9 @@ static void sirf_remove(struct serdev_device *serdev)
 	else
 		sirf_runtime_suspend(&serdev->dev);
 
+	if (data->wakeup)
+		free_irq(data->irq, data);
+
 	if (data->on_off)
 		regulator_disable(data->vcc);
 
@@ -386,6 +553,7 @@ static void sirf_remove(struct serdev_device *serdev)
 static const struct of_device_id sirf_of_match[] = {
 	{ .compatible = "fastrax,uc430" },
 	{ .compatible = "linx,r4" },
+	{ .compatible = "wi2wi,w2sg0004" },
 	{ .compatible = "wi2wi,w2sg0008i" },
 	{ .compatible = "wi2wi,w2sg0084i" },
 	{},

drivers/gpu/drm/i915/intel_audio.c

@@ -984,7 +984,9 @@ void i915_audio_component_init(struct drm_i915_private *dev_priv)
 {
 	int ret;
 
-	ret = component_add(dev_priv->drm.dev, &i915_audio_component_bind_ops);
+	ret = component_add_typed(dev_priv->drm.dev,
+				  &i915_audio_component_bind_ops,
+				  I915_COMPONENT_AUDIO);
 	if (ret < 0) {
 		DRM_ERROR("failed to add audio component (%d)\n", ret);
 		/* continue with reduced functionality */

drivers/gpu/drm/i915/intel_display.h

@@ -26,6 +26,7 @@
 #define _INTEL_DISPLAY_H_
 
 #include <drm/drm_util.h>
+#include <drm/i915_drm.h>
 
 enum i915_gpio {
 	GPIOA,
@@ -150,21 +151,6 @@ enum plane_id {
 	for ((__p) = PLANE_PRIMARY; (__p) < I915_MAX_PLANES; (__p)++) \
 		for_each_if((__crtc)->plane_ids_mask & BIT(__p))
 
-enum port {
-	PORT_NONE = -1,
-
-	PORT_A = 0,
-	PORT_B,
-	PORT_C,
-	PORT_D,
-	PORT_E,
-	PORT_F,
-
-	I915_MAX_PORTS
-};
-
-#define port_name(p) ((p) + 'A')
-
 /*
  * Ports identifier referenced from other drivers.
  * Expected to remain stable over time

drivers/gpu/drm/msm/Kconfig

@@ -5,6 +5,7 @@ config DRM_MSM
 	depends on ARCH_QCOM || SOC_IMX5 || (ARM && COMPILE_TEST)
 	depends on OF && COMMON_CLK
 	depends on MMU
+	depends on INTERCONNECT || !INTERCONNECT
 	select QCOM_MDT_LOADER if ARCH_QCOM
 	select REGULATOR
 	select DRM_KMS_HELPER

drivers/gpu/drm/msm/adreno/a6xx_gmu.c

@@ -2,6 +2,7 @@
 /* Copyright (c) 2017-2018 The Linux Foundation. All rights reserved. */
 
 #include <linux/clk.h>
+#include <linux/interconnect.h>
 #include <linux/pm_opp.h>
 #include <soc/qcom/cmd-db.h>
 
@@ -84,6 +85,9 @@ bool a6xx_gmu_gx_is_on(struct a6xx_gmu *gmu)
 
 static void __a6xx_gmu_set_freq(struct a6xx_gmu *gmu, int index)
 {
+	struct a6xx_gpu *a6xx_gpu = container_of(gmu, struct a6xx_gpu, gmu);
+	struct adreno_gpu *adreno_gpu = &a6xx_gpu->base;
+	struct msm_gpu *gpu = &adreno_gpu->base;
 	int ret;
 
 	gmu_write(gmu, REG_A6XX_GMU_DCVS_ACK_OPTION, 0);
@@ -106,6 +110,12 @@ static void __a6xx_gmu_set_freq(struct a6xx_gmu *gmu, int index)
 		dev_err(gmu->dev, "GMU set GPU frequency error: %d\n", ret);
 
 	gmu->freq = gmu->gpu_freqs[index];
+
+	/*
+	 * Eventually we will want to scale the path vote with the frequency but
+	 * for now leave it at max so that the performance is nominal.
+	 */
+	icc_set_bw(gpu->icc_path, 0, MBps_to_icc(7216));
 }
 
 void a6xx_gmu_set_freq(struct msm_gpu *gpu, unsigned long freq)
@@ -705,6 +715,8 @@ out:
 
 int a6xx_gmu_resume(struct a6xx_gpu *a6xx_gpu)
 {
+	struct adreno_gpu *adreno_gpu = &a6xx_gpu->base;
+	struct msm_gpu *gpu = &adreno_gpu->base;
 	struct a6xx_gmu *gmu = &a6xx_gpu->gmu;
 	int status, ret;
 
@@ -720,6 +732,9 @@ int a6xx_gmu_resume(struct a6xx_gpu *a6xx_gpu)
 	if (ret)
 		goto out;
 
+	/* Set the bus quota to a reasonable value for boot */
+	icc_set_bw(gpu->icc_path, 0, MBps_to_icc(3072));
+
 	a6xx_gmu_irq_enable(gmu);
 
 	/* Check to see if we are doing a cold or warm boot */
@@ -760,6 +775,8 @@ bool a6xx_gmu_isidle(struct a6xx_gmu *gmu)
 
 int a6xx_gmu_stop(struct a6xx_gpu *a6xx_gpu)
 {
+	struct adreno_gpu *adreno_gpu = &a6xx_gpu->base;
+	struct msm_gpu *gpu = &adreno_gpu->base;
 	struct a6xx_gmu *gmu = &a6xx_gpu->gmu;
 	u32 val;
 
@@ -806,6 +823,9 @@ int a6xx_gmu_stop(struct a6xx_gpu *a6xx_gpu)
 	/* Tell RPMh to power off the GPU */
 	a6xx_rpmh_stop(gmu);
 
+	/* Remove the bus vote */
+	icc_set_bw(gpu->icc_path, 0, 0);
+
 	clk_bulk_disable_unprepare(gmu->nr_clocks, gmu->clocks);
 
 	pm_runtime_put_sync(gmu->dev);

drivers/gpu/drm/msm/adreno/adreno_gpu.c

@@ -18,6 +18,7 @@
  */
 
 #include <linux/ascii85.h>
+#include <linux/interconnect.h>
 #include <linux/kernel.h>
 #include <linux/pm_opp.h>
 #include <linux/slab.h>
@@ -747,6 +748,11 @@ static int adreno_get_pwrlevels(struct device *dev,
 
 	DBG("fast_rate=%u, slow_rate=27000000", gpu->fast_rate);
 
+	/* Check for an interconnect path for the bus */
+	gpu->icc_path = of_icc_get(dev, NULL);
+	if (IS_ERR(gpu->icc_path))
+		gpu->icc_path = NULL;
+
 	return 0;
 }
 
@@ -787,10 +793,13 @@ int adreno_gpu_init(struct drm_device *drm, struct platform_device *pdev,
 
 void adreno_gpu_cleanup(struct adreno_gpu *adreno_gpu)
 {
+	struct msm_gpu *gpu = &adreno_gpu->base;
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(adreno_gpu->info->fw); i++)
 		release_firmware(adreno_gpu->fw[i]);
 
+	icc_put(gpu->icc_path);
+
 	msm_gpu_cleanup(&adreno_gpu->base);
 }

drivers/gpu/drm/msm/msm_gpu.h

@@ -19,6 +19,7 @@
 #define __MSM_GPU_H__
 
 #include <linux/clk.h>
+#include <linux/interconnect.h>
 #include <linux/regulator/consumer.h>
 
 #include "msm_drv.h"
@@ -118,6 +119,8 @@ struct msm_gpu {
 	struct clk *ebi1_clk, *core_clk, *rbbmtimer_clk;
 	uint32_t fast_rate;
 
+	struct icc_path *icc_path;
+
 	/* Hang and Inactivity Detection:
 	 */
 #define DRM_MSM_INACTIVE_PERIOD   66 /* in ms (roughly four frames) */

drivers/hv/channel.c

@@ -282,8 +282,8 @@ int vmbus_open(struct vmbus_channel *newchannel,
 EXPORT_SYMBOL_GPL(vmbus_open);
 
 /* Used for Hyper-V Socket: a guest client's connect() to the host */
-int vmbus_send_tl_connect_request(const uuid_le *shv_guest_servie_id,
+int vmbus_send_tl_connect_request(const guid_t *shv_guest_servie_id,
-				  const uuid_le *shv_host_servie_id)
+				  const guid_t *shv_host_servie_id)
 {
 	struct vmbus_channel_tl_connect_request conn_msg;
 	int ret;

drivers/hv/channel_mgmt.c

@@ -141,7 +141,7 @@ static const struct vmbus_device vmbus_devs[] = {
 };
 
 static const struct {
-	uuid_le guid;
+	guid_t guid;
 } vmbus_unsupported_devs[] = {
 	{ HV_AVMA1_GUID },
 	{ HV_AVMA2_GUID },
@@ -171,26 +171,26 @@ static void vmbus_rescind_cleanup(struct vmbus_channel *channel)
 	spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, flags);
 }
 
-static bool is_unsupported_vmbus_devs(const uuid_le *guid)
+static bool is_unsupported_vmbus_devs(const guid_t *guid)
 {
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(vmbus_unsupported_devs); i++)
-		if (!uuid_le_cmp(*guid, vmbus_unsupported_devs[i].guid))
+		if (guid_equal(guid, &vmbus_unsupported_devs[i].guid))
 			return true;
 	return false;
 }
 
 static u16 hv_get_dev_type(const struct vmbus_channel *channel)
 {
-	const uuid_le *guid = &channel->offermsg.offer.if_type;
+	const guid_t *guid = &channel->offermsg.offer.if_type;
 	u16 i;
 
 	if (is_hvsock_channel(channel) || is_unsupported_vmbus_devs(guid))
 		return HV_UNKNOWN;
 
 	for (i = HV_IDE; i < HV_UNKNOWN; i++) {
-		if (!uuid_le_cmp(*guid, vmbus_devs[i].guid))
+		if (guid_equal(guid, &vmbus_devs[i].guid))
 			return i;
 	}
 	pr_info("Unknown GUID: %pUl\n", guid);
@@ -561,10 +561,10 @@ static void vmbus_process_offer(struct vmbus_channel *newchannel)
 	atomic_dec(&vmbus_connection.offer_in_progress);
 
 	list_for_each_entry(channel, &vmbus_connection.chn_list, listentry) {
-		if (!uuid_le_cmp(channel->offermsg.offer.if_type,
+		if (guid_equal(&channel->offermsg.offer.if_type,
-				 newchannel->offermsg.offer.if_type) &&
+			       &newchannel->offermsg.offer.if_type) &&
-		    !uuid_le_cmp(channel->offermsg.offer.if_instance,
+		    guid_equal(&channel->offermsg.offer.if_instance,
-				 newchannel->offermsg.offer.if_instance)) {
+			       &newchannel->offermsg.offer.if_instance)) {
 			fnew = false;
 			break;
 		}

drivers/hv/hyperv_vmbus.h

@@ -312,8 +312,8 @@ extern const struct vmbus_channel_message_table_entry
 
 /* General vmbus interface */
 
-struct hv_device *vmbus_device_create(const uuid_le *type,
+struct hv_device *vmbus_device_create(const guid_t *type,
-				      const uuid_le *instance,
+				      const guid_t *instance,
 				      struct vmbus_channel *channel);
 
 int vmbus_device_register(struct hv_device *child_device_obj);

drivers/hv/ring_buffer.c

@@ -74,8 +74,10 @@ static void hv_signal_on_write(u32 old_write, struct vmbus_channel *channel)
 	 * This is the only case we need to signal when the
 	 * ring transitions from being empty to non-empty.
 	 */
-	if (old_write == READ_ONCE(rbi->ring_buffer->read_index))
+	if (old_write == READ_ONCE(rbi->ring_buffer->read_index)) {
+		++channel->intr_out_empty;
 		vmbus_setevent(channel);
+	}
 }
 
 /* Get the next write location for the specified ring buffer. */
@@ -272,10 +274,19 @@ int hv_ringbuffer_write(struct vmbus_channel *channel,
 	 * is empty since the read index == write index.
 	 */
 	if (bytes_avail_towrite <= totalbytes_towrite) {
+		++channel->out_full_total;
+
+		if (!channel->out_full_flag) {
+			++channel->out_full_first;
+			channel->out_full_flag = true;
+		}
+
 		spin_unlock_irqrestore(&outring_info->ring_lock, flags);
 		return -EAGAIN;
 	}
 
+	channel->out_full_flag = false;
+
 	/* Write to the ring buffer */
 	next_write_location = hv_get_next_write_location(outring_info);
 
@@ -530,6 +541,7 @@ void hv_pkt_iter_close(struct vmbus_channel *channel)
 	if (curr_write_sz <= pending_sz)
 		return;
 
+	++channel->intr_in_full;
 	vmbus_setevent(channel);
 }
 EXPORT_SYMBOL_GPL(hv_pkt_iter_close);

drivers/hv/vmbus_drv.c

@@ -234,7 +234,7 @@ static ssize_t server_monitor_pending_show(struct device *dev,
 		return -ENODEV;
 	return sprintf(buf, "%d\n",
 		       channel_pending(hv_dev->channel,
-				       vmbus_connection.monitor_pages[1]));
+				       vmbus_connection.monitor_pages[0]));
 }
 static DEVICE_ATTR_RO(server_monitor_pending);
 
@@ -654,38 +654,28 @@ static int vmbus_uevent(struct device *device, struct kobj_uevent_env *env)
 	return ret;
 }
 
-static const uuid_le null_guid;
-
-static inline bool is_null_guid(const uuid_le *guid)
-{
-	if (uuid_le_cmp(*guid, null_guid))
-		return false;
-	return true;
-}
-
 static const struct hv_vmbus_device_id *
-hv_vmbus_dev_match(const struct hv_vmbus_device_id *id, const uuid_le *guid)
+hv_vmbus_dev_match(const struct hv_vmbus_device_id *id, const guid_t *guid)
-
 {
 	if (id == NULL)
 		return NULL; /* empty device table */
 
-	for (; !is_null_guid(&id->guid); id++)
+	for (; !guid_is_null(&id->guid); id++)
-		if (!uuid_le_cmp(id->guid, *guid))
+		if (guid_equal(&id->guid, guid))
 			return id;
 
 	return NULL;
 }
 
 static const struct hv_vmbus_device_id *
-hv_vmbus_dynid_match(struct hv_driver *drv, const uuid_le *guid)
+hv_vmbus_dynid_match(struct hv_driver *drv, const guid_t *guid)
 {
 	const struct hv_vmbus_device_id *id = NULL;
 	struct vmbus_dynid *dynid;
 
 	spin_lock(&drv->dynids.lock);
 	list_for_each_entry(dynid, &drv->dynids.list, node) {
-		if (!uuid_le_cmp(dynid->id.guid, *guid)) {
+		if (guid_equal(&dynid->id.guid, guid)) {
 			id = &dynid->id;
 			break;
 		}
@@ -695,9 +685,7 @@ hv_vmbus_dynid_match(struct hv_driver *drv, const uuid_le *guid)
 	return id;
 }
 
-static const struct hv_vmbus_device_id vmbus_device_null = {
+static const struct hv_vmbus_device_id vmbus_device_null;
-	.guid = NULL_UUID_LE,
-};
 
 /*
  * Return a matching hv_vmbus_device_id pointer.
@@ -706,7 +694,7 @@ static const struct hv_vmbus_device_id vmbus_device_null = {
 static const struct hv_vmbus_device_id *hv_vmbus_get_id(struct hv_driver *drv,
 							struct hv_device *dev)
 {
-	const uuid_le *guid = &dev->dev_type;
+	const guid_t *guid = &dev->dev_type;
 	const struct hv_vmbus_device_id *id;
 
 	/* When driver_override is set, only bind to the matching driver */
@@ -726,7 +714,7 @@ static const struct hv_vmbus_device_id *hv_vmbus_get_id(struct hv_driver *drv,
 }
 
 /* vmbus_add_dynid - add a new device ID to this driver and re-probe devices */
-static int vmbus_add_dynid(struct hv_driver *drv, uuid_le *guid)
+static int vmbus_add_dynid(struct hv_driver *drv, guid_t *guid)
 {
 	struct vmbus_dynid *dynid;
 
@@ -764,10 +752,10 @@ static ssize_t new_id_store(struct device_driver *driver, const char *buf,
 			    size_t count)
 {
 	struct hv_driver *drv = drv_to_hv_drv(driver);
-	uuid_le guid;
+	guid_t guid;
 	ssize_t retval;
 
-	retval = uuid_le_to_bin(buf, &guid);
+	retval = guid_parse(buf, &guid);
 	if (retval)
 		return retval;
 
@@ -791,10 +779,10 @@ static ssize_t remove_id_store(struct device_driver *driver, const char *buf,
 {
 	struct hv_driver *drv = drv_to_hv_drv(driver);
 	struct vmbus_dynid *dynid, *n;
-	uuid_le guid;
+	guid_t guid;
 	ssize_t retval;
 
-	retval = uuid_le_to_bin(buf, &guid);
+	retval = guid_parse(buf, &guid);
 	if (retval)
 		return retval;
 
@@ -803,7 +791,7 @@ static ssize_t remove_id_store(struct device_driver *driver, const char *buf,
 	list_for_each_entry_safe(dynid, n, &drv->dynids.list, node) {
 		struct hv_vmbus_device_id *id = &dynid->id;
 
-		if (!uuid_le_cmp(id->guid, guid)) {
+		if (guid_equal(&id->guid, &guid)) {
 			list_del(&dynid->node);
 			kfree(dynid);
 			retval = count;
@@ -1496,6 +1484,38 @@ static ssize_t channel_events_show(const struct vmbus_channel *channel, char *bu
 }
 static VMBUS_CHAN_ATTR(events, S_IRUGO, channel_events_show, NULL);
 
+static ssize_t channel_intr_in_full_show(const struct vmbus_channel *channel,
+					 char *buf)
+{
+	return sprintf(buf, "%llu\n",
+		       (unsigned long long)channel->intr_in_full);
+}
+static VMBUS_CHAN_ATTR(intr_in_full, 0444, channel_intr_in_full_show, NULL);
+
+static ssize_t channel_intr_out_empty_show(const struct vmbus_channel *channel,
+					   char *buf)
+{
+	return sprintf(buf, "%llu\n",
+		       (unsigned long long)channel->intr_out_empty);
+}
+static VMBUS_CHAN_ATTR(intr_out_empty, 0444, channel_intr_out_empty_show, NULL);
+
+static ssize_t channel_out_full_first_show(const struct vmbus_channel *channel,
+					   char *buf)
+{
+	return sprintf(buf, "%llu\n",
+		       (unsigned long long)channel->out_full_first);
+}
+static VMBUS_CHAN_ATTR(out_full_first, 0444, channel_out_full_first_show, NULL);
+
+static ssize_t channel_out_full_total_show(const struct vmbus_channel *channel,
+					   char *buf)
+{
+	return sprintf(buf, "%llu\n",
+		       (unsigned long long)channel->out_full_total);
+}
+static VMBUS_CHAN_ATTR(out_full_total, 0444, channel_out_full_total_show, NULL);
+
 static ssize_t subchannel_monitor_id_show(const struct vmbus_channel *channel,
 					  char *buf)
 {
@@ -1521,6 +1541,10 @@ static struct attribute *vmbus_chan_attrs[] = {
 	&chan_attr_latency.attr,
 	&chan_attr_interrupts.attr,
 	&chan_attr_events.attr,
+	&chan_attr_intr_in_full.attr,
+	&chan_attr_intr_out_empty.attr,
+	&chan_attr_out_full_first.attr,
+	&chan_attr_out_full_total.attr,
 	&chan_attr_monitor_id.attr,
 	&chan_attr_subchannel_id.attr,
 	NULL
@@ -1556,8 +1580,8 @@ int vmbus_add_channel_kobj(struct hv_device *dev, struct vmbus_channel *channel)
  * vmbus_device_create - Creates and registers a new child device
  * on the vmbus.
  */
-struct hv_device *vmbus_device_create(const uuid_le *type,
+struct hv_device *vmbus_device_create(const guid_t *type,
-				      const uuid_le *instance,
+				      const guid_t *instance,
 				      struct vmbus_channel *channel)
 {
 	struct hv_device *child_device_obj;
@@ -1569,12 +1593,10 @@ struct hv_device *vmbus_device_create(const uuid_le *type,
 	}
 
 	child_device_obj->channel = channel;
-	memcpy(&child_device_obj->dev_type, type, sizeof(uuid_le));
+	guid_copy(&child_device_obj->dev_type, type);
-	memcpy(&child_device_obj->dev_instance, instance,
+	guid_copy(&child_device_obj->dev_instance, instance);
-	       sizeof(uuid_le));
 	child_device_obj->vendor_id = 0x1414; /* MSFT vendor ID */
 
-
 	return child_device_obj;
 }
 

drivers/hwtracing/coresight/coresight-cpu-debug.c

@@ -668,6 +668,10 @@ static const struct amba_id debug_ids[] = {
 		.id	= 0x000bbd08,
 		.mask	= 0x000fffff,
 	},
+	{       /* Debug for Cortex-A73 */
+		.id	= 0x000bbd09,
+		.mask	= 0x000fffff,
+	},
 	{ 0, 0 },
 };
 

drivers/hwtracing/coresight/coresight-etm4x.c

@@ -55,7 +55,8 @@ static void etm4_os_unlock(struct etmv4_drvdata *drvdata)
 
 static bool etm4_arch_supported(u8 arch)
 {
-	switch (arch) {
+	/* Mask out the minor version number */
+	switch (arch & 0xf0) {
 	case ETM_ARCH_V4:
 		break;
 	default:

drivers/hwtracing/coresight/coresight-stm.c

@@ -793,7 +793,7 @@ static int stm_probe(struct amba_device *adev, const struct amba_id *id)
 	struct stm_drvdata *drvdata;
 	struct resource *res = &adev->res;
 	struct resource ch_res;
-	size_t res_size, bitmap_size;
+	size_t bitmap_size;
 	struct coresight_desc desc = { 0 };
 	struct device_node *np = adev->dev.of_node;
 
@@ -833,15 +833,11 @@ static int stm_probe(struct amba_device *adev, const struct amba_id *id)
 
 	drvdata->write_bytes = stm_fundamental_data_size(drvdata);
 
-	if (boot_nr_channel) {
+	if (boot_nr_channel)
 		drvdata->numsp = boot_nr_channel;
-		res_size = min((resource_size_t)(boot_nr_channel *
+	else
-				  BYTES_PER_CHANNEL), resource_size(res));
-	} else {
 		drvdata->numsp = stm_num_stimulus_port(drvdata);
-		res_size = min((resource_size_t)(drvdata->numsp *
+
-				 BYTES_PER_CHANNEL), resource_size(res));
-	}
 	bitmap_size = BITS_TO_LONGS(drvdata->numsp) * sizeof(long);
 
 	guaranteed = devm_kzalloc(dev, bitmap_size, GFP_KERNEL);

drivers/hwtracing/coresight/of_coresight.c

@@ -80,8 +80,8 @@ static struct device_node *of_coresight_get_port_parent(struct device_node *ep)
 	 * Skip one-level up to the real device node, if we
 	 * are using the new bindings.
 	 */
-	if (!of_node_cmp(parent->name, "in-ports") ||
+	if (of_node_name_eq(parent, "in-ports") ||
-	    !of_node_cmp(parent->name, "out-ports"))
+	    of_node_name_eq(parent, "out-ports"))
 		parent = of_get_next_parent(parent);
 
 	return parent;

drivers/hwtracing/intel_th/core.c

@@ -422,6 +422,7 @@ static const struct intel_th_subdevice {
 	unsigned		nres;
 	unsigned		type;
 	unsigned		otype;
+	bool			mknode;
 	unsigned		scrpd;
 	int			id;
 } intel_th_subdevices[] = {
@@ -456,6 +457,7 @@ static const struct intel_th_subdevice {
 		.name	= "msc",
 		.id	= 0,
 		.type	= INTEL_TH_OUTPUT,
+		.mknode	= true,
 		.otype	= GTH_MSU,
 		.scrpd	= SCRPD_MEM_IS_PRIM_DEST | SCRPD_MSC0_IS_ENABLED,
 	},
@@ -476,6 +478,7 @@ static const struct intel_th_subdevice {
 		.name	= "msc",
 		.id	= 1,
 		.type	= INTEL_TH_OUTPUT,
+		.mknode	= true,
 		.otype	= GTH_MSU,
 		.scrpd	= SCRPD_MEM_IS_PRIM_DEST | SCRPD_MSC1_IS_ENABLED,
 	},
@@ -635,7 +638,8 @@ intel_th_subdevice_alloc(struct intel_th *th,
 	}
 
 	if (subdev->type == INTEL_TH_OUTPUT) {
-		thdev->dev.devt = MKDEV(th->major, th->num_thdevs);
+		if (subdev->mknode)
+			thdev->dev.devt = MKDEV(th->major, th->num_thdevs);
 		thdev->output.type = subdev->otype;
 		thdev->output.port = -1;
 		thdev->output.scratchpad = subdev->scrpd;

drivers/hwtracing/intel_th/gth.c

@@ -607,6 +607,7 @@ static void intel_th_gth_unassign(struct intel_th_device *thdev,
 {
 	struct gth_device *gth = dev_get_drvdata(&thdev->dev);
 	int port = othdev->output.port;
+	int master;
 
 	if (thdev->host_mode)
 		return;
@@ -615,6 +616,9 @@ static void intel_th_gth_unassign(struct intel_th_device *thdev,
 	othdev->output.port = -1;
 	othdev->output.active = false;
 	gth->output[port].output = NULL;
+	for (master = 0; master <= TH_CONFIGURABLE_MASTERS; master++)
+		if (gth->master[master] == port)
+			gth->master[master] = -1;
 	spin_unlock(&gth->gth_lock);
 }
 

drivers/hwtracing/intel_th/pti.c

@@ -272,19 +272,17 @@ static ssize_t lpp_dest_store(struct device *dev, struct device_attribute *attr,
 			      const char *buf, size_t size)
 {
 	struct pti_device *pti = dev_get_drvdata(dev);
-	ssize_t ret = -EINVAL;
 	int i;
 
-	for (i = 0; i < ARRAY_SIZE(lpp_dest_str); i++)
+	i = sysfs_match_string(lpp_dest_str, buf);
-		if (sysfs_streq(buf, lpp_dest_str[i]))
+	if (i < 0)
-			break;
+		return i;
 
-	if (i < ARRAY_SIZE(lpp_dest_str) && pti->lpp_dest_mask & BIT(i)) {
+	if (!(pti->lpp_dest_mask & BIT(i)))
-		pti->lpp_dest = i;
+		return -EINVAL;
-		ret = size;
-	}
 
-	return ret;
+	pti->lpp_dest = i;
+	return size;
 }
 
 static DEVICE_ATTR_RW(lpp_dest);

drivers/hwtracing/intel_th/sth.c

@@ -84,8 +84,12 @@ static ssize_t notrace sth_stm_packet(struct stm_data *stm_data,
 	/* Global packets (GERR, XSYNC, TRIG) are sent with register writes */
 	case STP_PACKET_GERR:
 		reg += 4;
+		/* fall through */
+
 	case STP_PACKET_XSYNC:
 		reg += 8;
+		/* fall through */
+
 	case STP_PACKET_TRIG:
 		if (flags & STP_PACKET_TIMESTAMPED)
 			reg += 4;

drivers/hwtracing/stm/core.c

@@ -244,6 +244,9 @@ static int find_free_channels(unsigned long *bitmap, unsigned int start,
 			;
 		if (i == width)
 			return pos;
+
+		/* step over [pos..pos+i) to continue search */
+		pos += i;
 	}
 
 	return -1;
@@ -732,7 +735,7 @@ static int stm_char_policy_set_ioctl(struct stm_file *stmf, void __user *arg)
 	struct stm_device *stm = stmf->stm;
 	struct stp_policy_id *id;
 	char *ids[] = { NULL, NULL };
-	int ret = -EINVAL;
+	int ret = -EINVAL, wlimit = 1;
 	u32 size;
 
 	if (stmf->output.nr_chans)
@@ -760,8 +763,10 @@ static int stm_char_policy_set_ioctl(struct stm_file *stmf, void __user *arg)
 	if (id->__reserved_0 || id->__reserved_1)
 		goto err_free;
 
-	if (id->width < 1 ||
+	if (stm->data->sw_mmiosz)
-	    id->width > PAGE_SIZE / stm->data->sw_mmiosz)
+		wlimit = PAGE_SIZE / stm->data->sw_mmiosz;
+
+	if (id->width < 1 || id->width > wlimit)
 		goto err_free;
 
 	ids[0] = id->id;

drivers/interconnect/Kconfig

@@ -0,0 +1,15 @@
+menuconfig INTERCONNECT
+	tristate "On-Chip Interconnect management support"
+	help
+	  Support for management of the on-chip interconnects.
+
+	  This framework is designed to provide a generic interface for
+	  managing the interconnects in a SoC.
+
+	  If unsure, say no.
+
+if INTERCONNECT
+
+source "drivers/interconnect/qcom/Kconfig"
+
+endif

drivers/interconnect/Makefile

@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+
+icc-core-objs				:= core.o
+
+obj-$(CONFIG_INTERCONNECT)		+= icc-core.o
+obj-$(CONFIG_INTERCONNECT_QCOM)		+= qcom/

drivers/interconnect/core.c

@@ -0,0 +1,799 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Interconnect framework core driver
+ *
+ * Copyright (c) 2017-2019, Linaro Ltd.
+ * Author: Georgi Djakov <georgi.djakov@linaro.org>
+ */
+
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/idr.h>
+#include <linux/init.h>
+#include <linux/interconnect.h>
+#include <linux/interconnect-provider.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/overflow.h>
+
+static DEFINE_IDR(icc_idr);
+static LIST_HEAD(icc_providers);
+static DEFINE_MUTEX(icc_lock);
+static struct dentry *icc_debugfs_dir;
+
+/**
+ * struct icc_req - constraints that are attached to each node
+ * @req_node: entry in list of requests for the particular @node
+ * @node: the interconnect node to which this constraint applies
+ * @dev: reference to the device that sets the constraints
+ * @avg_bw: an integer describing the average bandwidth in kBps
+ * @peak_bw: an integer describing the peak bandwidth in kBps
+ */
+struct icc_req {
+	struct hlist_node req_node;
+	struct icc_node *node;
+	struct device *dev;
+	u32 avg_bw;
+	u32 peak_bw;
+};
+
+/**
+ * struct icc_path - interconnect path structure
+ * @num_nodes: number of hops (nodes)
+ * @reqs: array of the requests applicable to this path of nodes
+ */
+struct icc_path {
+	size_t num_nodes;
+	struct icc_req reqs[];
+};
+
+static void icc_summary_show_one(struct seq_file *s, struct icc_node *n)
+{
+	if (!n)
+		return;
+
+	seq_printf(s, "%-30s %12u %12u\n",
+		   n->name, n->avg_bw, n->peak_bw);
+}
+
+static int icc_summary_show(struct seq_file *s, void *data)
+{
+	struct icc_provider *provider;
+
+	seq_puts(s, " node                                   avg         peak\n");
+	seq_puts(s, "--------------------------------------------------------\n");
+
+	mutex_lock(&icc_lock);
+
+	list_for_each_entry(provider, &icc_providers, provider_list) {
+		struct icc_node *n;
+
+		list_for_each_entry(n, &provider->nodes, node_list) {
+			struct icc_req *r;
+
+			icc_summary_show_one(s, n);
+			hlist_for_each_entry(r, &n->req_list, req_node) {
+				if (!r->dev)
+					continue;
+
+				seq_printf(s, "    %-26s %12u %12u\n",
+					   dev_name(r->dev), r->avg_bw,
+					   r->peak_bw);
+			}
+		}
+	}
+
+	mutex_unlock(&icc_lock);
+
+	return 0;
+}
+
+static int icc_summary_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, icc_summary_show, inode->i_private);
+}
+
+static const struct file_operations icc_summary_fops = {
+	.open		= icc_summary_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static struct icc_node *node_find(const int id)
+{
+	return idr_find(&icc_idr, id);
+}
+
+static struct icc_path *path_init(struct device *dev, struct icc_node *dst,
+				  ssize_t num_nodes)
+{
+	struct icc_node *node = dst;
+	struct icc_path *path;
+	int i;
+
+	path = kzalloc(struct_size(path, reqs, num_nodes), GFP_KERNEL);
+	if (!path)
+		return ERR_PTR(-ENOMEM);
+
+	path->num_nodes = num_nodes;
+
+	for (i = num_nodes - 1; i >= 0; i--) {
+		node->provider->users++;
+		hlist_add_head(&path->reqs[i].req_node, &node->req_list);
+		path->reqs[i].node = node;
+		path->reqs[i].dev = dev;
+		/* reference to previous node was saved during path traversal */
+		node = node->reverse;
+	}
+
+	return path;
+}
+
+static struct icc_path *path_find(struct device *dev, struct icc_node *src,
+				  struct icc_node *dst)
+{
+	struct icc_path *path = ERR_PTR(-EPROBE_DEFER);
+	struct icc_node *n, *node = NULL;
+	struct list_head traverse_list;
+	struct list_head edge_list;
+	struct list_head visited_list;
+	size_t i, depth = 1;
+	bool found = false;
+
+	INIT_LIST_HEAD(&traverse_list);
+	INIT_LIST_HEAD(&edge_list);
+	INIT_LIST_HEAD(&visited_list);
+
+	list_add(&src->search_list, &traverse_list);
+	src->reverse = NULL;
+
+	do {
+		list_for_each_entry_safe(node, n, &traverse_list, search_list) {
+			if (node == dst) {
+				found = true;
+				list_splice_init(&edge_list, &visited_list);
+				list_splice_init(&traverse_list, &visited_list);
+				break;
+			}
+			for (i = 0; i < node->num_links; i++) {
+				struct icc_node *tmp = node->links[i];
+
+				if (!tmp) {
+					path = ERR_PTR(-ENOENT);
+					goto out;
+				}
+
+				if (tmp->is_traversed)
+					continue;
+
+				tmp->is_traversed = true;
+				tmp->reverse = node;
+				list_add_tail(&tmp->search_list, &edge_list);
+			}
+		}
+
+		if (found)
+			break;
+
+		list_splice_init(&traverse_list, &visited_list);
+		list_splice_init(&edge_list, &traverse_list);
+
+		/* count the hops including the source */
+		depth++;
+
+	} while (!list_empty(&traverse_list));
+
+out:
+
+	/* reset the traversed state */
+	list_for_each_entry_reverse(n, &visited_list, search_list)
+		n->is_traversed = false;
+
+	if (found)
+		path = path_init(dev, dst, depth);
+
+	return path;
+}
+
+/*
+ * We want the path to honor all bandwidth requests, so the average and peak
+ * bandwidth requirements from each consumer are aggregated at each node.
+ * The aggregation is platform specific, so each platform can customize it by
+ * implementing its own aggregate() function.
+ */
+
+static int aggregate_requests(struct icc_node *node)
+{
+	struct icc_provider *p = node->provider;
+	struct icc_req *r;
+
+	node->avg_bw = 0;
+	node->peak_bw = 0;
+
+	hlist_for_each_entry(r, &node->req_list, req_node)
+		p->aggregate(node, r->avg_bw, r->peak_bw,
+			     &node->avg_bw, &node->peak_bw);
+
+	return 0;
+}
+
+static int apply_constraints(struct icc_path *path)
+{
+	struct icc_node *next, *prev = NULL;
+	int ret = -EINVAL;
+	int i;
+
+	for (i = 0; i < path->num_nodes; i++) {
+		next = path->reqs[i].node;
+
+		/*
+		 * Both endpoints should be valid master-slave pairs of the
+		 * same interconnect provider that will be configured.
+		 */
+		if (!prev || next->provider != prev->provider) {
+			prev = next;
+			continue;
+		}
+
+		/* set the constraints */
+		ret = next->provider->set(prev, next);
+		if (ret)
+			goto out;
+
+		prev = next;
+	}
+out:
+	return ret;
+}
+
+/* of_icc_xlate_onecell() - Translate function using a single index.
+ * @spec: OF phandle args to map into an interconnect node.
+ * @data: private data (pointer to struct icc_onecell_data)
+ *
+ * This is a generic translate function that can be used to model simple
+ * interconnect providers that have one device tree node and provide
+ * multiple interconnect nodes. A single cell is used as an index into
+ * an array of icc nodes specified in the icc_onecell_data struct when
+ * registering the provider.
+ */
+struct icc_node *of_icc_xlate_onecell(struct of_phandle_args *spec,
+				      void *data)
+{
+	struct icc_onecell_data *icc_data = data;
+	unsigned int idx = spec->args[0];
+
+	if (idx >= icc_data->num_nodes) {
+		pr_err("%s: invalid index %u\n", __func__, idx);
+		return ERR_PTR(-EINVAL);
+	}
+
+	return icc_data->nodes[idx];
+}
+EXPORT_SYMBOL_GPL(of_icc_xlate_onecell);
+
+/**
+ * of_icc_get_from_provider() - Look-up interconnect node
+ * @spec: OF phandle args to use for look-up
+ *
+ * Looks for interconnect provider under the node specified by @spec and if
+ * found, uses xlate function of the provider to map phandle args to node.
+ *
+ * Returns a valid pointer to struct icc_node on success or ERR_PTR()
+ * on failure.
+ */
+static struct icc_node *of_icc_get_from_provider(struct of_phandle_args *spec)
+{
+	struct icc_node *node = ERR_PTR(-EPROBE_DEFER);
+	struct icc_provider *provider;
+
+	if (!spec || spec->args_count != 1)
+		return ERR_PTR(-EINVAL);
+
+	mutex_lock(&icc_lock);
+	list_for_each_entry(provider, &icc_providers, provider_list) {
+		if (provider->dev->of_node == spec->np)
+			node = provider->xlate(spec, provider->data);
+		if (!IS_ERR(node))
+			break;
+	}
+	mutex_unlock(&icc_lock);
+
+	return node;
+}
+
+/**
+ * of_icc_get() - get a path handle from a DT node based on name
+ * @dev: device pointer for the consumer device
+ * @name: interconnect path name
+ *
+ * This function will search for a path between two endpoints and return an
+ * icc_path handle on success. Use icc_put() to release constraints when they
+ * are not needed anymore.
+ * If the interconnect API is disabled, NULL is returned and the consumer
+ * drivers will still build. Drivers are free to handle this specifically,
+ * but they don't have to.
+ *
+ * Return: icc_path pointer on success or ERR_PTR() on error. NULL is returned
+ * when the API is disabled or the "interconnects" DT property is missing.
+ */
+struct icc_path *of_icc_get(struct device *dev, const char *name)
+{
+	struct icc_path *path = ERR_PTR(-EPROBE_DEFER);
+	struct icc_node *src_node, *dst_node;
+	struct device_node *np = NULL;
+	struct of_phandle_args src_args, dst_args;
+	int idx = 0;
+	int ret;
+
+	if (!dev || !dev->of_node)
+		return ERR_PTR(-ENODEV);
+
+	np = dev->of_node;
+
+	/*
+	 * When the consumer DT node do not have "interconnects" property
+	 * return a NULL path to skip setting constraints.
+	 */
+	if (!of_find_property(np, "interconnects", NULL))
+		return NULL;
+
+	/*
+	 * We use a combination of phandle and specifier for endpoint. For now
+	 * lets support only global ids and extend this in the future if needed
+	 * without breaking DT compatibility.
+	 */
+	if (name) {
+		idx = of_property_match_string(np, "interconnect-names", name);
+		if (idx < 0)
+			return ERR_PTR(idx);
+	}
+
+	ret = of_parse_phandle_with_args(np, "interconnects",
+					 "#interconnect-cells", idx * 2,
+					 &src_args);
+	if (ret)
+		return ERR_PTR(ret);
+
+	of_node_put(src_args.np);
+
+	ret = of_parse_phandle_with_args(np, "interconnects",
+					 "#interconnect-cells", idx * 2 + 1,
+					 &dst_args);
+	if (ret)
+		return ERR_PTR(ret);
+
+	of_node_put(dst_args.np);
+
+	src_node = of_icc_get_from_provider(&src_args);
+
+	if (IS_ERR(src_node)) {
+		if (PTR_ERR(src_node) != -EPROBE_DEFER)
+			dev_err(dev, "error finding src node: %ld\n",
+				PTR_ERR(src_node));
+		return ERR_CAST(src_node);
+	}
+
+	dst_node = of_icc_get_from_provider(&dst_args);
+
+	if (IS_ERR(dst_node)) {
+		if (PTR_ERR(dst_node) != -EPROBE_DEFER)
+			dev_err(dev, "error finding dst node: %ld\n",
+				PTR_ERR(dst_node));
+		return ERR_CAST(dst_node);
+	}
+
+	mutex_lock(&icc_lock);
+	path = path_find(dev, src_node, dst_node);
+	if (IS_ERR(path))
+		dev_err(dev, "%s: invalid path=%ld\n", __func__, PTR_ERR(path));
+	mutex_unlock(&icc_lock);
+
+	return path;
+}
+EXPORT_SYMBOL_GPL(of_icc_get);
+
+/**
+ * icc_set_bw() - set bandwidth constraints on an interconnect path
+ * @path: reference to the path returned by icc_get()
+ * @avg_bw: average bandwidth in kilobytes per second
+ * @peak_bw: peak bandwidth in kilobytes per second
+ *
+ * This function is used by an interconnect consumer to express its own needs
+ * in terms of bandwidth for a previously requested path between two endpoints.
+ * The requests are aggregated and each node is updated accordingly. The entire
+ * path is locked by a mutex to ensure that the set() is completed.
+ * The @path can be NULL when the "interconnects" DT properties is missing,
+ * which will mean that no constraints will be set.
+ *
+ * Returns 0 on success, or an appropriate error code otherwise.
+ */
+int icc_set_bw(struct icc_path *path, u32 avg_bw, u32 peak_bw)
+{
+	struct icc_node *node;
+	u32 old_avg, old_peak;
+	size_t i;
+	int ret;
+
+	if (!path || !path->num_nodes)
+		return 0;
+
+	mutex_lock(&icc_lock);
+
+	old_avg = path->reqs[0].avg_bw;
+	old_peak = path->reqs[0].peak_bw;
+
+	for (i = 0; i < path->num_nodes; i++) {
+		node = path->reqs[i].node;
+
+		/* update the consumer request for this path */
+		path->reqs[i].avg_bw = avg_bw;
+		path->reqs[i].peak_bw = peak_bw;
+
+		/* aggregate requests for this node */
+		aggregate_requests(node);
+	}
+
+	ret = apply_constraints(path);
+	if (ret) {
+		pr_debug("interconnect: error applying constraints (%d)\n",
+			 ret);
+
+		for (i = 0; i < path->num_nodes; i++) {
+			node = path->reqs[i].node;
+			path->reqs[i].avg_bw = old_avg;
+			path->reqs[i].peak_bw = old_peak;
+			aggregate_requests(node);
+		}
+		apply_constraints(path);
+	}
+
+	mutex_unlock(&icc_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(icc_set_bw);
+
+/**
+ * icc_get() - return a handle for path between two endpoints
+ * @dev: the device requesting the path
+ * @src_id: source device port id
+ * @dst_id: destination device port id
+ *
+ * This function will search for a path between two endpoints and return an
+ * icc_path handle on success. Use icc_put() to release
+ * constraints when they are not needed anymore.
+ * If the interconnect API is disabled, NULL is returned and the consumer
+ * drivers will still build. Drivers are free to handle this specifically,
+ * but they don't have to.
+ *
+ * Return: icc_path pointer on success, ERR_PTR() on error or NULL if the
+ * interconnect API is disabled.
+ */
+struct icc_path *icc_get(struct device *dev, const int src_id, const int dst_id)
+{
+	struct icc_node *src, *dst;
+	struct icc_path *path = ERR_PTR(-EPROBE_DEFER);
+
+	mutex_lock(&icc_lock);
+
+	src = node_find(src_id);
+	if (!src)
+		goto out;
+
+	dst = node_find(dst_id);
+	if (!dst)
+		goto out;
+
+	path = path_find(dev, src, dst);
+	if (IS_ERR(path))
+		dev_err(dev, "%s: invalid path=%ld\n", __func__, PTR_ERR(path));
+
+out:
+	mutex_unlock(&icc_lock);
+	return path;
+}
+EXPORT_SYMBOL_GPL(icc_get);
+
+/**
+ * icc_put() - release the reference to the icc_path
+ * @path: interconnect path
+ *
+ * Use this function to release the constraints on a path when the path is
+ * no longer needed. The constraints will be re-aggregated.
+ */
+void icc_put(struct icc_path *path)
+{
+	struct icc_node *node;
+	size_t i;
+	int ret;
+
+	if (!path || WARN_ON(IS_ERR(path)))
+		return;
+
+	ret = icc_set_bw(path, 0, 0);
+	if (ret)
+		pr_err("%s: error (%d)\n", __func__, ret);
+
+	mutex_lock(&icc_lock);
+	for (i = 0; i < path->num_nodes; i++) {
+		node = path->reqs[i].node;
+		hlist_del(&path->reqs[i].req_node);
+		if (!WARN_ON(!node->provider->users))
+			node->provider->users--;
+	}
+	mutex_unlock(&icc_lock);
+
+	kfree(path);
+}
+EXPORT_SYMBOL_GPL(icc_put);
+
+static struct icc_node *icc_node_create_nolock(int id)
+{
+	struct icc_node *node;
+
+	/* check if node already exists */
+	node = node_find(id);
+	if (node)
+		return node;
+
+	node = kzalloc(sizeof(*node), GFP_KERNEL);
+	if (!node)
+		return ERR_PTR(-ENOMEM);
+
+	id = idr_alloc(&icc_idr, node, id, id + 1, GFP_KERNEL);
+	if (id < 0) {
+		WARN(1, "%s: couldn't get idr\n", __func__);
+		kfree(node);
+		return ERR_PTR(id);
+	}
+
+	node->id = id;
+
+	return node;
+}
+
+/**
+ * icc_node_create() - create a node
+ * @id: node id
+ *
+ * Return: icc_node pointer on success, or ERR_PTR() on error
+ */
+struct icc_node *icc_node_create(int id)
+{
+	struct icc_node *node;
+
+	mutex_lock(&icc_lock);
+
+	node = icc_node_create_nolock(id);
+
+	mutex_unlock(&icc_lock);
+
+	return node;
+}
+EXPORT_SYMBOL_GPL(icc_node_create);
+
+/**
+ * icc_node_destroy() - destroy a node
+ * @id: node id
+ */
+void icc_node_destroy(int id)
+{
+	struct icc_node *node;
+
+	mutex_lock(&icc_lock);
+
+	node = node_find(id);
+	if (node) {
+		idr_remove(&icc_idr, node->id);
+		WARN_ON(!hlist_empty(&node->req_list));
+	}
+
+	mutex_unlock(&icc_lock);
+
+	kfree(node);
+}
+EXPORT_SYMBOL_GPL(icc_node_destroy);
+
+/**
+ * icc_link_create() - create a link between two nodes
+ * @node: source node id
+ * @dst_id: destination node id
+ *
+ * Create a link between two nodes. The nodes might belong to different
+ * interconnect providers and the @dst_id node might not exist (if the
+ * provider driver has not probed yet). So just create the @dst_id node
+ * and when the actual provider driver is probed, the rest of the node
+ * data is filled.
+ *
+ * Return: 0 on success, or an error code otherwise
+ */
+int icc_link_create(struct icc_node *node, const int dst_id)
+{
+	struct icc_node *dst;
+	struct icc_node **new;
+	int ret = 0;
+
+	if (!node->provider)
+		return -EINVAL;
+
+	mutex_lock(&icc_lock);
+
+	dst = node_find(dst_id);
+	if (!dst) {
+		dst = icc_node_create_nolock(dst_id);
+
+		if (IS_ERR(dst)) {
+			ret = PTR_ERR(dst);
+			goto out;
+		}
+	}
+
+	new = krealloc(node->links,
+		       (node->num_links + 1) * sizeof(*node->links),
+		       GFP_KERNEL);
+	if (!new) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	node->links = new;
+	node->links[node->num_links++] = dst;
+
+out:
+	mutex_unlock(&icc_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(icc_link_create);
+
+/**
+ * icc_link_destroy() - destroy a link between two nodes
+ * @src: pointer to source node
+ * @dst: pointer to destination node
+ *
+ * Return: 0 on success, or an error code otherwise
+ */
+int icc_link_destroy(struct icc_node *src, struct icc_node *dst)
+{
+	struct icc_node **new;
+	size_t slot;
+	int ret = 0;
+
+	if (IS_ERR_OR_NULL(src))
+		return -EINVAL;
+
+	if (IS_ERR_OR_NULL(dst))
+		return -EINVAL;
+
+	mutex_lock(&icc_lock);
+
+	for (slot = 0; slot < src->num_links; slot++)
+		if (src->links[slot] == dst)
+			break;
+
+	if (WARN_ON(slot == src->num_links)) {
+		ret = -ENXIO;
+		goto out;
+	}
+
+	src->links[slot] = src->links[--src->num_links];
+
+	new = krealloc(src->links, src->num_links * sizeof(*src->links),
+		       GFP_KERNEL);
+	if (new)
+		src->links = new;
+
+out:
+	mutex_unlock(&icc_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(icc_link_destroy);
+
+/**
+ * icc_node_add() - add interconnect node to interconnect provider
+ * @node: pointer to the interconnect node
+ * @provider: pointer to the interconnect provider
+ */
+void icc_node_add(struct icc_node *node, struct icc_provider *provider)
+{
+	mutex_lock(&icc_lock);
+
+	node->provider = provider;
+	list_add_tail(&node->node_list, &provider->nodes);
+
+	mutex_unlock(&icc_lock);
+}
+EXPORT_SYMBOL_GPL(icc_node_add);
+
+/**
+ * icc_node_del() - delete interconnect node from interconnect provider
+ * @node: pointer to the interconnect node
+ */
+void icc_node_del(struct icc_node *node)
+{
+	mutex_lock(&icc_lock);
+
+	list_del(&node->node_list);
+
+	mutex_unlock(&icc_lock);
+}
+EXPORT_SYMBOL_GPL(icc_node_del);
+
+/**
+ * icc_provider_add() - add a new interconnect provider
+ * @provider: the interconnect provider that will be added into topology
+ *
+ * Return: 0 on success, or an error code otherwise
+ */
+int icc_provider_add(struct icc_provider *provider)
+{
+	if (WARN_ON(!provider->set))
+		return -EINVAL;
+	if (WARN_ON(!provider->xlate))
+		return -EINVAL;
+
+	mutex_lock(&icc_lock);
+
+	INIT_LIST_HEAD(&provider->nodes);
+	list_add_tail(&provider->provider_list, &icc_providers);
+
+	mutex_unlock(&icc_lock);
+
+	dev_dbg(provider->dev, "interconnect provider added to topology\n");
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(icc_provider_add);
+
+/**
+ * icc_provider_del() - delete previously added interconnect provider
+ * @provider: the interconnect provider that will be removed from topology
+ *
+ * Return: 0 on success, or an error code otherwise
+ */
+int icc_provider_del(struct icc_provider *provider)
+{
+	mutex_lock(&icc_lock);
+	if (provider->users) {
+		pr_warn("interconnect provider still has %d users\n",
+			provider->users);
+		mutex_unlock(&icc_lock);
+		return -EBUSY;
+	}
+
+	if (!list_empty(&provider->nodes)) {
+		pr_warn("interconnect provider still has nodes\n");
+		mutex_unlock(&icc_lock);
+		return -EBUSY;
+	}
+
+	list_del(&provider->provider_list);
+	mutex_unlock(&icc_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(icc_provider_del);
+
+static int __init icc_init(void)
+{
+	icc_debugfs_dir = debugfs_create_dir("interconnect", NULL);
+	debugfs_create_file("interconnect_summary", 0444,
+			    icc_debugfs_dir, NULL, &icc_summary_fops);
+	return 0;
+}
+
+static void __exit icc_exit(void)
+{
+	debugfs_remove_recursive(icc_debugfs_dir);
+}
+module_init(icc_init);
+module_exit(icc_exit);
+
+MODULE_AUTHOR("Georgi Djakov <georgi.djakov@linaro.org>");
+MODULE_DESCRIPTION("Interconnect Driver Core");
+MODULE_LICENSE("GPL v2");

drivers/interconnect/qcom/Kconfig

@@ -0,0 +1,13 @@
+config INTERCONNECT_QCOM
+	bool "Qualcomm Network-on-Chip interconnect drivers"
+	depends on ARCH_QCOM
+	help
+	  Support for Qualcomm's Network-on-Chip interconnect hardware.
+
+config INTERCONNECT_QCOM_SDM845
+	tristate "Qualcomm SDM845 interconnect driver"
+	depends on INTERCONNECT_QCOM
+	depends on (QCOM_RPMH && QCOM_COMMAND_DB && OF) || COMPILE_TEST
+	help
+	  This is a driver for the Qualcomm Network-on-Chip on sdm845-based
+	  platforms.

drivers/interconnect/qcom/Makefile

@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
+qnoc-sdm845-objs			:= sdm845.o
+
+obj-$(CONFIG_INTERCONNECT_QCOM_SDM845) += qnoc-sdm845.o

drivers/interconnect/qcom/sdm845.c

@@ -0,0 +1,838 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ *
+ */
+
+#include <asm/div64.h>
+#include <dt-bindings/interconnect/qcom,sdm845.h>
+#include <linux/device.h>
+#include <linux/interconnect.h>
+#include <linux/interconnect-provider.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/sort.h>
+
+#include <soc/qcom/cmd-db.h>
+#include <soc/qcom/rpmh.h>
+#include <soc/qcom/tcs.h>
+
+#define BCM_TCS_CMD_COMMIT_SHFT		30
+#define BCM_TCS_CMD_COMMIT_MASK		0x40000000
+#define BCM_TCS_CMD_VALID_SHFT		29
+#define BCM_TCS_CMD_VALID_MASK		0x20000000
+#define BCM_TCS_CMD_VOTE_X_SHFT		14
+#define BCM_TCS_CMD_VOTE_MASK		0x3fff
+#define BCM_TCS_CMD_VOTE_Y_SHFT		0
+#define BCM_TCS_CMD_VOTE_Y_MASK		0xfffc000
+
+#define BCM_TCS_CMD(commit, valid, vote_x, vote_y)		\
+	(((commit) << BCM_TCS_CMD_COMMIT_SHFT) |		\
+	((valid) << BCM_TCS_CMD_VALID_SHFT) |			\
+	((cpu_to_le32(vote_x) &					\
+	BCM_TCS_CMD_VOTE_MASK) << BCM_TCS_CMD_VOTE_X_SHFT) |	\
+	((cpu_to_le32(vote_y) &					\
+	BCM_TCS_CMD_VOTE_MASK) << BCM_TCS_CMD_VOTE_Y_SHFT))
+
+#define to_qcom_provider(_provider) \
+	container_of(_provider, struct qcom_icc_provider, provider)
+
+struct qcom_icc_provider {
+	struct icc_provider provider;
+	struct device *dev;
+	struct qcom_icc_bcm **bcms;
+	size_t num_bcms;
+};
+
+/**
+ * struct bcm_db - Auxiliary data pertaining to each Bus Clock Manager (BCM)
+ * @unit: divisor used to convert bytes/sec bw value to an RPMh msg
+ * @width: multiplier used to convert bytes/sec bw value to an RPMh msg
+ * @vcd: virtual clock domain that this bcm belongs to
+ * @reserved: reserved field
+ */
+struct bcm_db {
+	__le32 unit;
+	__le16 width;
+	u8 vcd;
+	u8 reserved;
+};
+
+#define SDM845_MAX_LINKS	43
+#define SDM845_MAX_BCMS		30
+#define SDM845_MAX_BCM_PER_NODE	2
+#define SDM845_MAX_VCD		10
+
+/**
+ * struct qcom_icc_node - Qualcomm specific interconnect nodes
+ * @name: the node name used in debugfs
+ * @links: an array of nodes where we can go next while traversing
+ * @id: a unique node identifier
+ * @num_links: the total number of @links
+ * @channels: num of channels at this node
+ * @buswidth: width of the interconnect between a node and the bus
+ * @sum_avg: current sum aggregate value of all avg bw requests
+ * @max_peak: current max aggregate value of all peak bw requests
+ * @bcms: list of bcms associated with this logical node
+ * @num_bcms: num of @bcms
+ */
+struct qcom_icc_node {
+	const char *name;
+	u16 links[SDM845_MAX_LINKS];
+	u16 id;
+	u16 num_links;
+	u16 channels;
+	u16 buswidth;
+	u64 sum_avg;
+	u64 max_peak;
+	struct qcom_icc_bcm *bcms[SDM845_MAX_BCM_PER_NODE];
+	size_t num_bcms;
+};
+
+/**
+ * struct qcom_icc_bcm - Qualcomm specific hardware accelerator nodes
+ * known as Bus Clock Manager (BCM)
+ * @name: the bcm node name used to fetch BCM data from command db
+ * @type: latency or bandwidth bcm
+ * @addr: address offsets used when voting to RPMH
+ * @vote_x: aggregated threshold values, represents sum_bw when @type is bw bcm
+ * @vote_y: aggregated threshold values, represents peak_bw when @type is bw bcm
+ * @dirty: flag used to indicate whether the bcm needs to be committed
+ * @keepalive: flag used to indicate whether a keepalive is required
+ * @aux_data: auxiliary data used when calculating threshold values and
+ * communicating with RPMh
+ * @list: used to link to other bcms when compiling lists for commit
+ * @num_nodes: total number of @num_nodes
+ * @nodes: list of qcom_icc_nodes that this BCM encapsulates
+ */
+struct qcom_icc_bcm {
+	const char *name;
+	u32 type;
+	u32 addr;
+	u64 vote_x;
+	u64 vote_y;
+	bool dirty;
+	bool keepalive;
+	struct bcm_db aux_data;
+	struct list_head list;
+	size_t num_nodes;
+	struct qcom_icc_node *nodes[];
+};
+
+struct qcom_icc_fabric {
+	struct qcom_icc_node **nodes;
+	size_t num_nodes;
+};
+
+struct qcom_icc_desc {
+	struct qcom_icc_node **nodes;
+	size_t num_nodes;
+	struct qcom_icc_bcm **bcms;
+	size_t num_bcms;
+};
+
+#define DEFINE_QNODE(_name, _id, _channels, _buswidth,			\
+			_numlinks, ...)					\
+		static struct qcom_icc_node _name = {			\
+		.id = _id,						\
+		.name = #_name,						\
+		.channels = _channels,					\
+		.buswidth = _buswidth,					\
+		.num_links = _numlinks,					\
+		.links = { __VA_ARGS__ },				\
+	}
+
+DEFINE_QNODE(qhm_a1noc_cfg, MASTER_A1NOC_CFG, 1, 4, 1, SLAVE_SERVICE_A1NOC);
+DEFINE_QNODE(qhm_qup1, MASTER_BLSP_1, 1, 4, 1, SLAVE_A1NOC_SNOC);
+DEFINE_QNODE(qhm_tsif, MASTER_TSIF, 1, 4, 1, SLAVE_A1NOC_SNOC);
+DEFINE_QNODE(xm_sdc2, MASTER_SDCC_2, 1, 8, 1, SLAVE_A1NOC_SNOC);
+DEFINE_QNODE(xm_sdc4, MASTER_SDCC_4, 1, 8, 1, SLAVE_A1NOC_SNOC);
+DEFINE_QNODE(xm_ufs_card, MASTER_UFS_CARD, 1, 8, 1, SLAVE_A1NOC_SNOC);
+DEFINE_QNODE(xm_ufs_mem, MASTER_UFS_MEM, 1, 8, 1, SLAVE_A1NOC_SNOC);
+DEFINE_QNODE(xm_pcie_0, MASTER_PCIE_0, 1, 8, 1, SLAVE_ANOC_PCIE_A1NOC_SNOC);
+DEFINE_QNODE(qhm_a2noc_cfg, MASTER_A2NOC_CFG, 1, 4, 1, SLAVE_SERVICE_A2NOC);
+DEFINE_QNODE(qhm_qdss_bam, MASTER_QDSS_BAM, 1, 4, 1, SLAVE_A2NOC_SNOC);
+DEFINE_QNODE(qhm_qup2, MASTER_BLSP_2, 1, 4, 1, SLAVE_A2NOC_SNOC);
+DEFINE_QNODE(qnm_cnoc, MASTER_CNOC_A2NOC, 1, 8, 1, SLAVE_A2NOC_SNOC);
+DEFINE_QNODE(qxm_crypto, MASTER_CRYPTO, 1, 8, 1, SLAVE_A2NOC_SNOC);
+DEFINE_QNODE(qxm_ipa, MASTER_IPA, 1, 8, 1, SLAVE_A2NOC_SNOC);
+DEFINE_QNODE(xm_pcie3_1, MASTER_PCIE_1, 1, 8, 1, SLAVE_ANOC_PCIE_SNOC);
+DEFINE_QNODE(xm_qdss_etr, MASTER_QDSS_ETR, 1, 8, 1, SLAVE_A2NOC_SNOC);
+DEFINE_QNODE(xm_usb3_0, MASTER_USB3_0, 1, 8, 1, SLAVE_A2NOC_SNOC);
+DEFINE_QNODE(xm_usb3_1, MASTER_USB3_1, 1, 8, 1, SLAVE_A2NOC_SNOC);
+DEFINE_QNODE(qxm_camnoc_hf0_uncomp, MASTER_CAMNOC_HF0_UNCOMP, 1, 32, 1, SLAVE_CAMNOC_UNCOMP);
+DEFINE_QNODE(qxm_camnoc_hf1_uncomp, MASTER_CAMNOC_HF1_UNCOMP, 1, 32, 1, SLAVE_CAMNOC_UNCOMP);
+DEFINE_QNODE(qxm_camnoc_sf_uncomp, MASTER_CAMNOC_SF_UNCOMP, 1, 32, 1, SLAVE_CAMNOC_UNCOMP);
+DEFINE_QNODE(qhm_spdm, MASTER_SPDM, 1, 4, 1, SLAVE_CNOC_A2NOC);
+DEFINE_QNODE(qhm_tic, MASTER_TIC, 1, 4, 43, SLAVE_A1NOC_CFG, SLAVE_A2NOC_CFG, SLAVE_AOP, SLAVE_AOSS, SLAVE_CAMERA_CFG, SLAVE_CLK_CTL, SLAVE_CDSP_CFG, SLAVE_RBCPR_CX_CFG, SLAVE_CRYPTO_0_CFG, SLAVE_DCC_CFG, SLAVE_CNOC_DDRSS, SLAVE_DISPLAY_CFG, SLAVE_GLM, SLAVE_GFX3D_CFG, SLAVE_IMEM_CFG, SLAVE_IPA_CFG, SLAVE_CNOC_MNOC_CFG, SLAVE_PCIE_0_CFG, SLAVE_PCIE_1_CFG, SLAVE_PDM, SLAVE_SOUTH_PHY_CFG, SLAVE_PIMEM_CFG, SLAVE_PRNG, SLAVE_QDSS_CFG, SLAVE_BLSP_2, SLAVE_BLSP_1, SLAVE_SDCC_2, SLAVE_SDCC_4, SLAVE_SNOC_CFG, SLAVE_SPDM_WRAPPER, SLAVE_SPSS_CFG, SLAVE_TCSR, SLAVE_TLMM_NORTH, SLAVE_TLMM_SOUTH, SLAVE_TSIF, SLAVE_UFS_CARD_CFG, SLAVE_UFS_MEM_CFG, SLAVE_USB3_0, SLAVE_USB3_1, SLAVE_VENUS_CFG, SLAVE_VSENSE_CTRL_CFG, SLAVE_CNOC_A2NOC, SLAVE_SERVICE_CNOC);
+DEFINE_QNODE(qnm_snoc, MASTER_SNOC_CNOC, 1, 8, 42, SLAVE_A1NOC_CFG, SLAVE_A2NOC_CFG, SLAVE_AOP, SLAVE_AOSS, SLAVE_CAMERA_CFG, SLAVE_CLK_CTL, SLAVE_CDSP_CFG, SLAVE_RBCPR_CX_CFG, SLAVE_CRYPTO_0_CFG, SLAVE_DCC_CFG, SLAVE_CNOC_DDRSS, SLAVE_DISPLAY_CFG, SLAVE_GLM, SLAVE_GFX3D_CFG, SLAVE_IMEM_CFG, SLAVE_IPA_CFG, SLAVE_CNOC_MNOC_CFG, SLAVE_PCIE_0_CFG, SLAVE_PCIE_1_CFG, SLAVE_PDM, SLAVE_SOUTH_PHY_CFG, SLAVE_PIMEM_CFG, SLAVE_PRNG, SLAVE_QDSS_CFG, SLAVE_BLSP_2, SLAVE_BLSP_1, SLAVE_SDCC_2, SLAVE_SDCC_4, SLAVE_SNOC_CFG, SLAVE_SPDM_WRAPPER, SLAVE_SPSS_CFG, SLAVE_TCSR, SLAVE_TLMM_NORTH, SLAVE_TLMM_SOUTH, SLAVE_TSIF, SLAVE_UFS_CARD_CFG, SLAVE_UFS_MEM_CFG, SLAVE_USB3_0, SLAVE_USB3_1, SLAVE_VENUS_CFG, SLAVE_VSENSE_CTRL_CFG, SLAVE_SERVICE_CNOC);
+DEFINE_QNODE(xm_qdss_dap, MASTER_QDSS_DAP, 1, 8, 43, SLAVE_A1NOC_CFG, SLAVE_A2NOC_CFG, SLAVE_AOP, SLAVE_AOSS, SLAVE_CAMERA_CFG, SLAVE_CLK_CTL, SLAVE_CDSP_CFG, SLAVE_RBCPR_CX_CFG, SLAVE_CRYPTO_0_CFG, SLAVE_DCC_CFG, SLAVE_CNOC_DDRSS, SLAVE_DISPLAY_CFG, SLAVE_GLM, SLAVE_GFX3D_CFG, SLAVE_IMEM_CFG, SLAVE_IPA_CFG, SLAVE_CNOC_MNOC_CFG, SLAVE_PCIE_0_CFG, SLAVE_PCIE_1_CFG, SLAVE_PDM, SLAVE_SOUTH_PHY_CFG, SLAVE_PIMEM_CFG, SLAVE_PRNG, SLAVE_QDSS_CFG, SLAVE_BLSP_2, SLAVE_BLSP_1, SLAVE_SDCC_2, SLAVE_SDCC_4, SLAVE_SNOC_CFG, SLAVE_SPDM_WRAPPER, SLAVE_SPSS_CFG, SLAVE_TCSR, SLAVE_TLMM_NORTH, SLAVE_TLMM_SOUTH, SLAVE_TSIF, SLAVE_UFS_CARD_CFG, SLAVE_UFS_MEM_CFG, SLAVE_USB3_0, SLAVE_USB3_1, SLAVE_VENUS_CFG, SLAVE_VSENSE_CTRL_CFG, SLAVE_CNOC_A2NOC, SLAVE_SERVICE_CNOC);
+DEFINE_QNODE(qhm_cnoc, MASTER_CNOC_DC_NOC, 1, 4, 2, SLAVE_LLCC_CFG, SLAVE_MEM_NOC_CFG);
+DEFINE_QNODE(acm_l3, MASTER_APPSS_PROC, 1, 16, 3, SLAVE_GNOC_SNOC, SLAVE_GNOC_MEM_NOC, SLAVE_SERVICE_GNOC);
+DEFINE_QNODE(pm_gnoc_cfg, MASTER_GNOC_CFG, 1, 4, 1, SLAVE_SERVICE_GNOC);
+DEFINE_QNODE(llcc_mc, MASTER_LLCC, 4, 4, 1, SLAVE_EBI1);
+DEFINE_QNODE(acm_tcu, MASTER_TCU_0, 1, 8, 3, SLAVE_MEM_NOC_GNOC, SLAVE_LLCC, SLAVE_MEM_NOC_SNOC);
+DEFINE_QNODE(qhm_memnoc_cfg, MASTER_MEM_NOC_CFG, 1, 4, 2, SLAVE_MSS_PROC_MS_MPU_CFG, SLAVE_SERVICE_MEM_NOC);
+DEFINE_QNODE(qnm_apps, MASTER_GNOC_MEM_NOC, 2, 32, 1, SLAVE_LLCC);
+DEFINE_QNODE(qnm_mnoc_hf, MASTER_MNOC_HF_MEM_NOC, 2, 32, 2, SLAVE_MEM_NOC_GNOC, SLAVE_LLCC);
+DEFINE_QNODE(qnm_mnoc_sf, MASTER_MNOC_SF_MEM_NOC, 1, 32, 3, SLAVE_MEM_NOC_GNOC, SLAVE_LLCC, SLAVE_MEM_NOC_SNOC);
+DEFINE_QNODE(qnm_snoc_gc, MASTER_SNOC_GC_MEM_NOC, 1, 8, 1, SLAVE_LLCC);
+DEFINE_QNODE(qnm_snoc_sf, MASTER_SNOC_SF_MEM_NOC, 1, 16, 2, SLAVE_MEM_NOC_GNOC, SLAVE_LLCC);
+DEFINE_QNODE(qxm_gpu, MASTER_GFX3D, 2, 32, 3, SLAVE_MEM_NOC_GNOC, SLAVE_LLCC, SLAVE_MEM_NOC_SNOC);
+DEFINE_QNODE(qhm_mnoc_cfg, MASTER_CNOC_MNOC_CFG, 1, 4, 1, SLAVE_SERVICE_MNOC);
+DEFINE_QNODE(qxm_camnoc_hf0, MASTER_CAMNOC_HF0, 1, 32, 1, SLAVE_MNOC_HF_MEM_NOC);
+DEFINE_QNODE(qxm_camnoc_hf1, MASTER_CAMNOC_HF1, 1, 32, 1, SLAVE_MNOC_HF_MEM_NOC);
+DEFINE_QNODE(qxm_camnoc_sf, MASTER_CAMNOC_SF, 1, 32, 1, SLAVE_MNOC_SF_MEM_NOC);
+DEFINE_QNODE(qxm_mdp0, MASTER_MDP0, 1, 32, 1, SLAVE_MNOC_HF_MEM_NOC);
+DEFINE_QNODE(qxm_mdp1, MASTER_MDP1, 1, 32, 1, SLAVE_MNOC_HF_MEM_NOC);
+DEFINE_QNODE(qxm_rot, MASTER_ROTATOR, 1, 32, 1, SLAVE_MNOC_SF_MEM_NOC);
+DEFINE_QNODE(qxm_venus0, MASTER_VIDEO_P0, 1, 32, 1, SLAVE_MNOC_SF_MEM_NOC);
+DEFINE_QNODE(qxm_venus1, MASTER_VIDEO_P1, 1, 32, 1, SLAVE_MNOC_SF_MEM_NOC);
+DEFINE_QNODE(qxm_venus_arm9, MASTER_VIDEO_PROC, 1, 8, 1, SLAVE_MNOC_SF_MEM_NOC);
+DEFINE_QNODE(qhm_snoc_cfg, MASTER_SNOC_CFG, 1, 4, 1, SLAVE_SERVICE_SNOC);
+DEFINE_QNODE(qnm_aggre1_noc, MASTER_A1NOC_SNOC, 1, 16, 6, SLAVE_APPSS, SLAVE_SNOC_CNOC, SLAVE_SNOC_MEM_NOC_SF, SLAVE_IMEM, SLAVE_PIMEM, SLAVE_QDSS_STM);
+DEFINE_QNODE(qnm_aggre2_noc, MASTER_A2NOC_SNOC, 1, 16, 9, SLAVE_APPSS, SLAVE_SNOC_CNOC, SLAVE_SNOC_MEM_NOC_SF, SLAVE_IMEM, SLAVE_PCIE_0, SLAVE_PCIE_1, SLAVE_PIMEM, SLAVE_QDSS_STM, SLAVE_TCU);
+DEFINE_QNODE(qnm_gladiator_sodv, MASTER_GNOC_SNOC, 1, 8, 8, SLAVE_APPSS, SLAVE_SNOC_CNOC, SLAVE_IMEM, SLAVE_PCIE_0, SLAVE_PCIE_1, SLAVE_PIMEM, SLAVE_QDSS_STM, SLAVE_TCU);
+DEFINE_QNODE(qnm_memnoc, MASTER_MEM_NOC_SNOC, 1, 8, 5, SLAVE_APPSS, SLAVE_SNOC_CNOC, SLAVE_IMEM, SLAVE_PIMEM, SLAVE_QDSS_STM);
+DEFINE_QNODE(qnm_pcie_anoc, MASTER_ANOC_PCIE_SNOC, 1, 16, 5, SLAVE_APPSS, SLAVE_SNOC_CNOC, SLAVE_SNOC_MEM_NOC_SF, SLAVE_IMEM, SLAVE_QDSS_STM);
+DEFINE_QNODE(qxm_pimem, MASTER_PIMEM, 1, 8, 2, SLAVE_SNOC_MEM_NOC_GC, SLAVE_IMEM);
+DEFINE_QNODE(xm_gic, MASTER_GIC, 1, 8, 2, SLAVE_SNOC_MEM_NOC_GC, SLAVE_IMEM);
+DEFINE_QNODE(qns_a1noc_snoc, SLAVE_A1NOC_SNOC, 1, 16, 1, MASTER_A1NOC_SNOC);
+DEFINE_QNODE(srvc_aggre1_noc, SLAVE_SERVICE_A1NOC, 1, 4, 0);
+DEFINE_QNODE(qns_pcie_a1noc_snoc, SLAVE_ANOC_PCIE_A1NOC_SNOC, 1, 16, 1, MASTER_ANOC_PCIE_SNOC);
+DEFINE_QNODE(qns_a2noc_snoc, SLAVE_A2NOC_SNOC, 1, 16, 1, MASTER_A2NOC_SNOC);
+DEFINE_QNODE(qns_pcie_snoc, SLAVE_ANOC_PCIE_SNOC, 1, 16, 1, MASTER_ANOC_PCIE_SNOC);
+DEFINE_QNODE(srvc_aggre2_noc, SLAVE_SERVICE_A2NOC, 1, 4, 0);
+DEFINE_QNODE(qns_camnoc_uncomp, SLAVE_CAMNOC_UNCOMP, 1, 32, 0);
+DEFINE_QNODE(qhs_a1_noc_cfg, SLAVE_A1NOC_CFG, 1, 4, 1, MASTER_A1NOC_CFG);
+DEFINE_QNODE(qhs_a2_noc_cfg, SLAVE_A2NOC_CFG, 1, 4, 1, MASTER_A2NOC_CFG);
+DEFINE_QNODE(qhs_aop, SLAVE_AOP, 1, 4, 0);
+DEFINE_QNODE(qhs_aoss, SLAVE_AOSS, 1, 4, 0);
+DEFINE_QNODE(qhs_camera_cfg, SLAVE_CAMERA_CFG, 1, 4, 0);
+DEFINE_QNODE(qhs_clk_ctl, SLAVE_CLK_CTL, 1, 4, 0);
+DEFINE_QNODE(qhs_compute_dsp_cfg, SLAVE_CDSP_CFG, 1, 4, 0);
+DEFINE_QNODE(qhs_cpr_cx, SLAVE_RBCPR_CX_CFG, 1, 4, 0);
+DEFINE_QNODE(qhs_crypto0_cfg, SLAVE_CRYPTO_0_CFG, 1, 4, 0);
+DEFINE_QNODE(qhs_dcc_cfg, SLAVE_DCC_CFG, 1, 4, 1, MASTER_CNOC_DC_NOC);
+DEFINE_QNODE(qhs_ddrss_cfg, SLAVE_CNOC_DDRSS, 1, 4, 0);
+DEFINE_QNODE(qhs_display_cfg, SLAVE_DISPLAY_CFG, 1, 4, 0);
+DEFINE_QNODE(qhs_glm, SLAVE_GLM, 1, 4, 0);
+DEFINE_QNODE(qhs_gpuss_cfg, SLAVE_GFX3D_CFG, 1, 8, 0);
+DEFINE_QNODE(qhs_imem_cfg, SLAVE_IMEM_CFG, 1, 4, 0);
+DEFINE_QNODE(qhs_ipa, SLAVE_IPA_CFG, 1, 4, 0);
+DEFINE_QNODE(qhs_mnoc_cfg, SLAVE_CNOC_MNOC_CFG, 1, 4, 1, MASTER_CNOC_MNOC_CFG);
+DEFINE_QNODE(qhs_pcie0_cfg, SLAVE_PCIE_0_CFG, 1, 4, 0);
+DEFINE_QNODE(qhs_pcie_gen3_cfg, SLAVE_PCIE_1_CFG, 1, 4, 0);
+DEFINE_QNODE(qhs_pdm, SLAVE_PDM, 1, 4, 0);
+DEFINE_QNODE(qhs_phy_refgen_south, SLAVE_SOUTH_PHY_CFG, 1, 4, 0);
+DEFINE_QNODE(qhs_pimem_cfg, SLAVE_PIMEM_CFG, 1, 4, 0);
+DEFINE_QNODE(qhs_prng, SLAVE_PRNG, 1, 4, 0);
+DEFINE_QNODE(qhs_qdss_cfg, SLAVE_QDSS_CFG, 1, 4, 0);
+DEFINE_QNODE(qhs_qupv3_north, SLAVE_BLSP_2, 1, 4, 0);
+DEFINE_QNODE(qhs_qupv3_south, SLAVE_BLSP_1, 1, 4, 0);
+DEFINE_QNODE(qhs_sdc2, SLAVE_SDCC_2, 1, 4, 0);
+DEFINE_QNODE(qhs_sdc4, SLAVE_SDCC_4, 1, 4, 0);
+DEFINE_QNODE(qhs_snoc_cfg, SLAVE_SNOC_CFG, 1, 4, 1, MASTER_SNOC_CFG);
+DEFINE_QNODE(qhs_spdm, SLAVE_SPDM_WRAPPER, 1, 4, 0);
+DEFINE_QNODE(qhs_spss_cfg, SLAVE_SPSS_CFG, 1, 4, 0);
+DEFINE_QNODE(qhs_tcsr, SLAVE_TCSR, 1, 4, 0);
+DEFINE_QNODE(qhs_tlmm_north, SLAVE_TLMM_NORTH, 1, 4, 0);
+DEFINE_QNODE(qhs_tlmm_south, SLAVE_TLMM_SOUTH, 1, 4, 0);
+DEFINE_QNODE(qhs_tsif, SLAVE_TSIF, 1, 4, 0);
+DEFINE_QNODE(qhs_ufs_card_cfg, SLAVE_UFS_CARD_CFG, 1, 4, 0);
+DEFINE_QNODE(qhs_ufs_mem_cfg, SLAVE_UFS_MEM_CFG, 1, 4, 0);
+DEFINE_QNODE(qhs_usb3_0, SLAVE_USB3_0, 1, 4, 0);
+DEFINE_QNODE(qhs_usb3_1, SLAVE_USB3_1, 1, 4, 0);
+DEFINE_QNODE(qhs_venus_cfg, SLAVE_VENUS_CFG, 1, 4, 0);
+DEFINE_QNODE(qhs_vsense_ctrl_cfg, SLAVE_VSENSE_CTRL_CFG, 1, 4, 0);
+DEFINE_QNODE(qns_cnoc_a2noc, SLAVE_CNOC_A2NOC, 1, 8, 1, MASTER_CNOC_A2NOC);
+DEFINE_QNODE(srvc_cnoc, SLAVE_SERVICE_CNOC, 1, 4, 0);
+DEFINE_QNODE(qhs_llcc, SLAVE_LLCC_CFG, 1, 4, 0);
+DEFINE_QNODE(qhs_memnoc, SLAVE_MEM_NOC_CFG, 1, 4, 1, MASTER_MEM_NOC_CFG);
+DEFINE_QNODE(qns_gladiator_sodv, SLAVE_GNOC_SNOC, 1, 8, 1, MASTER_GNOC_SNOC);
+DEFINE_QNODE(qns_gnoc_memnoc, SLAVE_GNOC_MEM_NOC, 2, 32, 1, MASTER_GNOC_MEM_NOC);
+DEFINE_QNODE(srvc_gnoc, SLAVE_SERVICE_GNOC, 1, 4, 0);
+DEFINE_QNODE(ebi, SLAVE_EBI1, 4, 4, 0);
+DEFINE_QNODE(qhs_mdsp_ms_mpu_cfg, SLAVE_MSS_PROC_MS_MPU_CFG, 1, 4, 0);
+DEFINE_QNODE(qns_apps_io, SLAVE_MEM_NOC_GNOC, 1, 32, 0);
+DEFINE_QNODE(qns_llcc, SLAVE_LLCC, 4, 16, 1, MASTER_LLCC);
+DEFINE_QNODE(qns_memnoc_snoc, SLAVE_MEM_NOC_SNOC, 1, 8, 1, MASTER_MEM_NOC_SNOC);
+DEFINE_QNODE(srvc_memnoc, SLAVE_SERVICE_MEM_NOC, 1, 4, 0);
+DEFINE_QNODE(qns2_mem_noc, SLAVE_MNOC_SF_MEM_NOC, 1, 32, 1, MASTER_MNOC_SF_MEM_NOC);
+DEFINE_QNODE(qns_mem_noc_hf, SLAVE_MNOC_HF_MEM_NOC, 2, 32, 1, MASTER_MNOC_HF_MEM_NOC);
+DEFINE_QNODE(srvc_mnoc, SLAVE_SERVICE_MNOC, 1, 4, 0);
+DEFINE_QNODE(qhs_apss, SLAVE_APPSS, 1, 8, 0);
+DEFINE_QNODE(qns_cnoc, SLAVE_SNOC_CNOC, 1, 8, 1, MASTER_SNOC_CNOC);
+DEFINE_QNODE(qns_memnoc_gc, SLAVE_SNOC_MEM_NOC_GC, 1, 8, 1, MASTER_SNOC_GC_MEM_NOC);
+DEFINE_QNODE(qns_memnoc_sf, SLAVE_SNOC_MEM_NOC_SF, 1, 16, 1, MASTER_SNOC_SF_MEM_NOC);
+DEFINE_QNODE(qxs_imem, SLAVE_IMEM, 1, 8, 0);
+DEFINE_QNODE(qxs_pcie, SLAVE_PCIE_0, 1, 8, 0);
+DEFINE_QNODE(qxs_pcie_gen3, SLAVE_PCIE_1, 1, 8, 0);
+DEFINE_QNODE(qxs_pimem, SLAVE_PIMEM, 1, 8, 0);
+DEFINE_QNODE(srvc_snoc, SLAVE_SERVICE_SNOC, 1, 4, 0);
+DEFINE_QNODE(xs_qdss_stm, SLAVE_QDSS_STM, 1, 4, 0);
+DEFINE_QNODE(xs_sys_tcu_cfg, SLAVE_TCU, 1, 8, 0);
+
+#define DEFINE_QBCM(_name, _bcmname, _keepalive, _numnodes, ...)	\
+		static struct qcom_icc_bcm _name = {			\
+		.name = _bcmname,					\
+		.keepalive = _keepalive,				\
+		.num_nodes = _numnodes,					\
+		.nodes = { __VA_ARGS__ },				\
+	}
+
+DEFINE_QBCM(bcm_acv, "ACV", false, 1, &ebi);
+DEFINE_QBCM(bcm_mc0, "MC0", true, 1, &ebi);
+DEFINE_QBCM(bcm_sh0, "SH0", true, 1, &qns_llcc);
+DEFINE_QBCM(bcm_mm0, "MM0", false, 1, &qns_mem_noc_hf);
+DEFINE_QBCM(bcm_sh1, "SH1", false, 1, &qns_apps_io);
+DEFINE_QBCM(bcm_mm1, "MM1", false, 7, &qxm_camnoc_hf0_uncomp, &qxm_camnoc_hf1_uncomp, &qxm_camnoc_sf_uncomp, &qxm_camnoc_hf0, &qxm_camnoc_hf1, &qxm_mdp0, &qxm_mdp1);
+DEFINE_QBCM(bcm_sh2, "SH2", false, 1, &qns_memnoc_snoc);
+DEFINE_QBCM(bcm_mm2, "MM2", false, 1, &qns2_mem_noc);
+DEFINE_QBCM(bcm_sh3, "SH3", false, 1, &acm_tcu);
+DEFINE_QBCM(bcm_mm3, "MM3", false, 5, &qxm_camnoc_sf, &qxm_rot, &qxm_venus0, &qxm_venus1, &qxm_venus_arm9);
+DEFINE_QBCM(bcm_sh5, "SH5", false, 1, &qnm_apps);
+DEFINE_QBCM(bcm_sn0, "SN0", true, 1, &qns_memnoc_sf);
+DEFINE_QBCM(bcm_ce0, "CE0", false, 1, &qxm_crypto);
+DEFINE_QBCM(bcm_cn0, "CN0", false, 47, &qhm_spdm, &qhm_tic, &qnm_snoc, &xm_qdss_dap, &qhs_a1_noc_cfg, &qhs_a2_noc_cfg, &qhs_aop, &qhs_aoss, &qhs_camera_cfg, &qhs_clk_ctl, &qhs_compute_dsp_cfg, &qhs_cpr_cx, &qhs_crypto0_cfg, &qhs_dcc_cfg, &qhs_ddrss_cfg, &qhs_display_cfg, &qhs_glm, &qhs_gpuss_cfg, &qhs_imem_cfg, &qhs_ipa, &qhs_mnoc_cfg, &qhs_pcie0_cfg, &qhs_pcie_gen3_cfg, &qhs_pdm, &qhs_phy_refgen_south, &qhs_pimem_cfg, &qhs_prng, &qhs_qdss_cfg, &qhs_qupv3_north, &qhs_qupv3_south, &qhs_sdc2, &qhs_sdc4, &qhs_snoc_cfg, &qhs_spdm, &qhs_spss_cfg, &qhs_tcsr, &qhs_tlmm_north, &qhs_tlmm_south, &qhs_tsif, &qhs_ufs_card_cfg, &qhs_ufs_mem_cfg, &qhs_usb3_0, &qhs_usb3_1, &qhs_venus_cfg, &qhs_vsense_ctrl_cfg, &qns_cnoc_a2noc, &srvc_cnoc);
+DEFINE_QBCM(bcm_qup0, "QUP0", false, 2, &qhm_qup1, &qhm_qup2);
+DEFINE_QBCM(bcm_sn1, "SN1", false, 1, &qxs_imem);
+DEFINE_QBCM(bcm_sn2, "SN2", false, 1, &qns_memnoc_gc);
+DEFINE_QBCM(bcm_sn3, "SN3", false, 1, &qns_cnoc);
+DEFINE_QBCM(bcm_sn4, "SN4", false, 1, &qxm_pimem);
+DEFINE_QBCM(bcm_sn5, "SN5", false, 1, &xs_qdss_stm);
+DEFINE_QBCM(bcm_sn6, "SN6", false, 3, &qhs_apss, &srvc_snoc, &xs_sys_tcu_cfg);
+DEFINE_QBCM(bcm_sn7, "SN7", false, 1, &qxs_pcie);
+DEFINE_QBCM(bcm_sn8, "SN8", false, 1, &qxs_pcie_gen3);
+DEFINE_QBCM(bcm_sn9, "SN9", false, 2, &srvc_aggre1_noc, &qnm_aggre1_noc);
+DEFINE_QBCM(bcm_sn11, "SN11", false, 2, &srvc_aggre2_noc, &qnm_aggre2_noc);
+DEFINE_QBCM(bcm_sn12, "SN12", false, 2, &qnm_gladiator_sodv, &xm_gic);
+DEFINE_QBCM(bcm_sn14, "SN14", false, 1, &qnm_pcie_anoc);
+DEFINE_QBCM(bcm_sn15, "SN15", false, 1, &qnm_memnoc);
+
+static struct qcom_icc_node *rsc_hlos_nodes[] = {
+	[MASTER_APPSS_PROC] = &acm_l3,
+	[MASTER_TCU_0] = &acm_tcu,
+	[MASTER_LLCC] = &llcc_mc,
+	[MASTER_GNOC_CFG] = &pm_gnoc_cfg,
+	[MASTER_A1NOC_CFG] = &qhm_a1noc_cfg,
+	[MASTER_A2NOC_CFG] = &qhm_a2noc_cfg,
+	[MASTER_CNOC_DC_NOC] = &qhm_cnoc,
+	[MASTER_MEM_NOC_CFG] = &qhm_memnoc_cfg,
+	[MASTER_CNOC_MNOC_CFG] = &qhm_mnoc_cfg,
+	[MASTER_QDSS_BAM] = &qhm_qdss_bam,
+	[MASTER_BLSP_1] = &qhm_qup1,
+	[MASTER_BLSP_2] = &qhm_qup2,
+	[MASTER_SNOC_CFG] = &qhm_snoc_cfg,
+	[MASTER_SPDM] = &qhm_spdm,
+	[MASTER_TIC] = &qhm_tic,
+	[MASTER_TSIF] = &qhm_tsif,
+	[MASTER_A1NOC_SNOC] = &qnm_aggre1_noc,
+	[MASTER_A2NOC_SNOC] = &qnm_aggre2_noc,
+	[MASTER_GNOC_MEM_NOC] = &qnm_apps,
+	[MASTER_CNOC_A2NOC] = &qnm_cnoc,
+	[MASTER_GNOC_SNOC] = &qnm_gladiator_sodv,
+	[MASTER_MEM_NOC_SNOC] = &qnm_memnoc,
+	[MASTER_MNOC_HF_MEM_NOC] = &qnm_mnoc_hf,
+	[MASTER_MNOC_SF_MEM_NOC] = &qnm_mnoc_sf,
+	[MASTER_ANOC_PCIE_SNOC] = &qnm_pcie_anoc,
+	[MASTER_SNOC_CNOC] = &qnm_snoc,
+	[MASTER_SNOC_GC_MEM_NOC] = &qnm_snoc_gc,
+	[MASTER_SNOC_SF_MEM_NOC] = &qnm_snoc_sf,
+	[MASTER_CAMNOC_HF0] = &qxm_camnoc_hf0,
+	[MASTER_CAMNOC_HF0_UNCOMP] = &qxm_camnoc_hf0_uncomp,
+	[MASTER_CAMNOC_HF1] = &qxm_camnoc_hf1,
+	[MASTER_CAMNOC_HF1_UNCOMP] = &qxm_camnoc_hf1_uncomp,
+	[MASTER_CAMNOC_SF] = &qxm_camnoc_sf,
+	[MASTER_CAMNOC_SF_UNCOMP] = &qxm_camnoc_sf_uncomp,
+	[MASTER_CRYPTO] = &qxm_crypto,
+	[MASTER_GFX3D] = &qxm_gpu,
+	[MASTER_IPA] = &qxm_ipa,
+	[MASTER_MDP0] = &qxm_mdp0,
+	[MASTER_MDP1] = &qxm_mdp1,
+	[MASTER_PIMEM] = &qxm_pimem,
+	[MASTER_ROTATOR] = &qxm_rot,
+	[MASTER_VIDEO_P0] = &qxm_venus0,
+	[MASTER_VIDEO_P1] = &qxm_venus1,
+	[MASTER_VIDEO_PROC] = &qxm_venus_arm9,
+	[MASTER_GIC] = &xm_gic,
+	[MASTER_PCIE_1] = &xm_pcie3_1,
+	[MASTER_PCIE_0] = &xm_pcie_0,
+	[MASTER_QDSS_DAP] = &xm_qdss_dap,
+	[MASTER_QDSS_ETR] = &xm_qdss_etr,
+	[MASTER_SDCC_2] = &xm_sdc2,
+	[MASTER_SDCC_4] = &xm_sdc4,
+	[MASTER_UFS_CARD] = &xm_ufs_card,
+	[MASTER_UFS_MEM] = &xm_ufs_mem,
+	[MASTER_USB3_0] = &xm_usb3_0,
+	[MASTER_USB3_1] = &xm_usb3_1,
+	[SLAVE_EBI1] = &ebi,
+	[SLAVE_A1NOC_CFG] = &qhs_a1_noc_cfg,
+	[SLAVE_A2NOC_CFG] = &qhs_a2_noc_cfg,
+	[SLAVE_AOP] = &qhs_aop,
+	[SLAVE_AOSS] = &qhs_aoss,
+	[SLAVE_APPSS] = &qhs_apss,
+	[SLAVE_CAMERA_CFG] = &qhs_camera_cfg,
+	[SLAVE_CLK_CTL] = &qhs_clk_ctl,
+	[SLAVE_CDSP_CFG] = &qhs_compute_dsp_cfg,
+	[SLAVE_RBCPR_CX_CFG] = &qhs_cpr_cx,
+	[SLAVE_CRYPTO_0_CFG] = &qhs_crypto0_cfg,
+	[SLAVE_DCC_CFG] = &qhs_dcc_cfg,
+	[SLAVE_CNOC_DDRSS] = &qhs_ddrss_cfg,
+	[SLAVE_DISPLAY_CFG] = &qhs_display_cfg,
+	[SLAVE_GLM] = &qhs_glm,
+	[SLAVE_GFX3D_CFG] = &qhs_gpuss_cfg,
+	[SLAVE_IMEM_CFG] = &qhs_imem_cfg,
+	[SLAVE_IPA_CFG] = &qhs_ipa,
+	[SLAVE_LLCC_CFG] = &qhs_llcc,
+	[SLAVE_MSS_PROC_MS_MPU_CFG] = &qhs_mdsp_ms_mpu_cfg,
+	[SLAVE_MEM_NOC_CFG] = &qhs_memnoc,
+	[SLAVE_CNOC_MNOC_CFG] = &qhs_mnoc_cfg,
+	[SLAVE_PCIE_0_CFG] = &qhs_pcie0_cfg,
+	[SLAVE_PCIE_1_CFG] = &qhs_pcie_gen3_cfg,
+	[SLAVE_PDM] = &qhs_pdm,
+	[SLAVE_SOUTH_PHY_CFG] = &qhs_phy_refgen_south,
+	[SLAVE_PIMEM_CFG] = &qhs_pimem_cfg,
+	[SLAVE_PRNG] = &qhs_prng,
+	[SLAVE_QDSS_CFG] = &qhs_qdss_cfg,
+	[SLAVE_BLSP_2] = &qhs_qupv3_north,
+	[SLAVE_BLSP_1] = &qhs_qupv3_south,
+	[SLAVE_SDCC_2] = &qhs_sdc2,
+	[SLAVE_SDCC_4] = &qhs_sdc4,
+	[SLAVE_SNOC_CFG] = &qhs_snoc_cfg,
+	[SLAVE_SPDM_WRAPPER] = &qhs_spdm,
+	[SLAVE_SPSS_CFG] = &qhs_spss_cfg,
+	[SLAVE_TCSR] = &qhs_tcsr,
+	[SLAVE_TLMM_NORTH] = &qhs_tlmm_north,
+	[SLAVE_TLMM_SOUTH] = &qhs_tlmm_south,
+	[SLAVE_TSIF] = &qhs_tsif,
+	[SLAVE_UFS_CARD_CFG] = &qhs_ufs_card_cfg,
+	[SLAVE_UFS_MEM_CFG] = &qhs_ufs_mem_cfg,
+	[SLAVE_USB3_0] = &qhs_usb3_0,
+	[SLAVE_USB3_1] = &qhs_usb3_1,
+	[SLAVE_VENUS_CFG] = &qhs_venus_cfg,
+	[SLAVE_VSENSE_CTRL_CFG] = &qhs_vsense_ctrl_cfg,
+	[SLAVE_MNOC_SF_MEM_NOC] = &qns2_mem_noc,
+	[SLAVE_A1NOC_SNOC] = &qns_a1noc_snoc,
+	[SLAVE_A2NOC_SNOC] = &qns_a2noc_snoc,
+	[SLAVE_MEM_NOC_GNOC] = &qns_apps_io,
+	[SLAVE_CAMNOC_UNCOMP] = &qns_camnoc_uncomp,
+	[SLAVE_SNOC_CNOC] = &qns_cnoc,
+	[SLAVE_CNOC_A2NOC] = &qns_cnoc_a2noc,
+	[SLAVE_GNOC_SNOC] = &qns_gladiator_sodv,
+	[SLAVE_GNOC_MEM_NOC] = &qns_gnoc_memnoc,
+	[SLAVE_LLCC] = &qns_llcc,
+	[SLAVE_MNOC_HF_MEM_NOC] = &qns_mem_noc_hf,
+	[SLAVE_SNOC_MEM_NOC_GC] = &qns_memnoc_gc,
+	[SLAVE_SNOC_MEM_NOC_SF] = &qns_memnoc_sf,
+	[SLAVE_MEM_NOC_SNOC] = &qns_memnoc_snoc,
+	[SLAVE_ANOC_PCIE_A1NOC_SNOC] = &qns_pcie_a1noc_snoc,
+	[SLAVE_ANOC_PCIE_SNOC] = &qns_pcie_snoc,
+	[SLAVE_IMEM] = &qxs_imem,
+	[SLAVE_PCIE_0] = &qxs_pcie,
+	[SLAVE_PCIE_1] = &qxs_pcie_gen3,
+	[SLAVE_PIMEM] = &qxs_pimem,
+	[SLAVE_SERVICE_A1NOC] = &srvc_aggre1_noc,
+	[SLAVE_SERVICE_A2NOC] = &srvc_aggre2_noc,
+	[SLAVE_SERVICE_CNOC] = &srvc_cnoc,
+	[SLAVE_SERVICE_GNOC] = &srvc_gnoc,
+	[SLAVE_SERVICE_MEM_NOC] = &srvc_memnoc,
+	[SLAVE_SERVICE_MNOC] = &srvc_mnoc,
+	[SLAVE_SERVICE_SNOC] = &srvc_snoc,
+	[SLAVE_QDSS_STM] = &xs_qdss_stm,
+	[SLAVE_TCU] = &xs_sys_tcu_cfg,
+};
+
+static struct qcom_icc_bcm *rsc_hlos_bcms[] = {
+	&bcm_acv,
+	&bcm_mc0,
+	&bcm_sh0,
+	&bcm_mm0,
+	&bcm_sh1,
+	&bcm_mm1,
+	&bcm_sh2,
+	&bcm_mm2,
+	&bcm_sh3,
+	&bcm_mm3,
+	&bcm_sh5,
+	&bcm_sn0,
+	&bcm_ce0,
+	&bcm_cn0,
+	&bcm_qup0,
+	&bcm_sn1,
+	&bcm_sn2,
+	&bcm_sn3,
+	&bcm_sn4,
+	&bcm_sn5,
+	&bcm_sn6,
+	&bcm_sn7,
+	&bcm_sn8,
+	&bcm_sn9,
+	&bcm_sn11,
+	&bcm_sn12,
+	&bcm_sn14,
+	&bcm_sn15,
+};
+
+static struct qcom_icc_desc sdm845_rsc_hlos = {
+	.nodes = rsc_hlos_nodes,
+	.num_nodes = ARRAY_SIZE(rsc_hlos_nodes),
+	.bcms = rsc_hlos_bcms,
+	.num_bcms = ARRAY_SIZE(rsc_hlos_bcms),
+};
+
+static int qcom_icc_bcm_init(struct qcom_icc_bcm *bcm, struct device *dev)
+{
+	struct qcom_icc_node *qn;
+	const struct bcm_db *data;
+	size_t data_count;
+	int i;
+
+	bcm->addr = cmd_db_read_addr(bcm->name);
+	if (!bcm->addr) {
+		dev_err(dev, "%s could not find RPMh address\n",
+			bcm->name);
+		return -EINVAL;
+	}
+
+	data = cmd_db_read_aux_data(bcm->name, &data_count);
+	if (IS_ERR(data)) {
+		dev_err(dev, "%s command db read error (%ld)\n",
+			bcm->name, PTR_ERR(data));
+		return PTR_ERR(data);
+	}
+	if (!data_count) {
+		dev_err(dev, "%s command db missing or partial aux data\n",
+			bcm->name);
+		return -EINVAL;
+	}
+
+	bcm->aux_data.unit = le32_to_cpu(data->unit);
+	bcm->aux_data.width = le16_to_cpu(data->width);
+	bcm->aux_data.vcd = data->vcd;
+	bcm->aux_data.reserved = data->reserved;
+
+	/*
+	 * Link Qnodes to their respective BCMs
+	 */
+	for (i = 0; i < bcm->num_nodes; i++) {
+		qn = bcm->nodes[i];
+		qn->bcms[qn->num_bcms] = bcm;
+		qn->num_bcms++;
+	}
+
+	return 0;
+}
+
+inline void tcs_cmd_gen(struct tcs_cmd *cmd, u64 vote_x, u64 vote_y,
+			u32 addr, bool commit)
+{
+	bool valid = true;
+
+	if (!cmd)
+		return;
+
+	if (vote_x == 0 && vote_y == 0)
+		valid = false;
+
+	if (vote_x > BCM_TCS_CMD_VOTE_MASK)
+		vote_x = BCM_TCS_CMD_VOTE_MASK;
+
+	if (vote_y > BCM_TCS_CMD_VOTE_MASK)
+		vote_y = BCM_TCS_CMD_VOTE_MASK;
+
+	cmd->addr = addr;
+	cmd->data = BCM_TCS_CMD(commit, valid, vote_x, vote_y);
+
+	/*
+	 * Set the wait for completion flag on command that need to be completed
+	 * before the next command.
+	 */
+	if (commit)
+		cmd->wait = true;
+}
+
+static void tcs_list_gen(struct list_head *bcm_list,
+			 struct tcs_cmd tcs_list[SDM845_MAX_VCD],
+			 int n[SDM845_MAX_VCD])
+{
+	struct qcom_icc_bcm *bcm;
+	bool commit;
+	size_t idx = 0, batch = 0, cur_vcd_size = 0;
+
+	memset(n, 0, sizeof(int) * SDM845_MAX_VCD);
+
+	list_for_each_entry(bcm, bcm_list, list) {
+		commit = false;
+		cur_vcd_size++;
+		if ((list_is_last(&bcm->list, bcm_list)) ||
+		    bcm->aux_data.vcd != list_next_entry(bcm, list)->aux_data.vcd) {
+			commit = true;
+			cur_vcd_size = 0;
+		}
+		tcs_cmd_gen(&tcs_list[idx], bcm->vote_x, bcm->vote_y,
+			    bcm->addr, commit);
+		idx++;
+		n[batch]++;
+		/*
+		 * Batch the BCMs in such a way that we do not split them in
+		 * multiple payloads when they are under the same VCD. This is
+		 * to ensure that every BCM is committed since we only set the
+		 * commit bit on the last BCM request of every VCD.
+		 */
+		if (n[batch] >= MAX_RPMH_PAYLOAD) {
+			if (!commit) {
+				n[batch] -= cur_vcd_size;
+				n[batch + 1] = cur_vcd_size;
+			}
+			batch++;
+		}
+	}
+}
+
+static void bcm_aggregate(struct qcom_icc_bcm *bcm)
+{
+	size_t i;
+	u64 agg_avg = 0;
+	u64 agg_peak = 0;
+	u64 temp;
+
+	for (i = 0; i < bcm->num_nodes; i++) {
+		temp = bcm->nodes[i]->sum_avg * bcm->aux_data.width;
+		do_div(temp, bcm->nodes[i]->buswidth * bcm->nodes[i]->channels);
+		agg_avg = max(agg_avg, temp);
+
+		temp = bcm->nodes[i]->max_peak * bcm->aux_data.width;
+		do_div(temp, bcm->nodes[i]->buswidth);
+		agg_peak = max(agg_peak, temp);
+	}
+
+	temp = agg_avg * 1000ULL;
+	do_div(temp, bcm->aux_data.unit);
+	bcm->vote_x = temp;
+
+	temp = agg_peak * 1000ULL;
+	do_div(temp, bcm->aux_data.unit);
+	bcm->vote_y = temp;
+
+	if (bcm->keepalive && bcm->vote_x == 0 && bcm->vote_y == 0) {
+		bcm->vote_x = 1;
+		bcm->vote_y = 1;
+	}
+
+	bcm->dirty = false;
+}
+
+static int qcom_icc_aggregate(struct icc_node *node, u32 avg_bw,
+			      u32 peak_bw, u32 *agg_avg, u32 *agg_peak)
+{
+	size_t i;
+	struct qcom_icc_node *qn;
+
+	qn = node->data;
+
+	*agg_avg += avg_bw;
+	*agg_peak = max_t(u32, *agg_peak, peak_bw);
+
+	qn->sum_avg = *agg_avg;
+	qn->max_peak = *agg_peak;
+
+	for (i = 0; i < qn->num_bcms; i++)
+		qn->bcms[i]->dirty = true;
+
+	return 0;
+}
+
+static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
+{
+	struct qcom_icc_provider *qp;
+	struct icc_node *node;
+	struct tcs_cmd cmds[SDM845_MAX_BCMS];
+	struct list_head commit_list;
+	int commit_idx[SDM845_MAX_VCD];
+	int ret = 0, i;
+
+	if (!src)
+		node = dst;
+	else
+		node = src;
+
+	qp = to_qcom_provider(node->provider);
+
+	INIT_LIST_HEAD(&commit_list);
+
+	for (i = 0; i < qp->num_bcms; i++) {
+		if (qp->bcms[i]->dirty) {
+			bcm_aggregate(qp->bcms[i]);
+			list_add_tail(&qp->bcms[i]->list, &commit_list);
+		}
+	}
+
+	/*
+	 * Construct the command list based on a pre ordered list of BCMs
+	 * based on VCD.
+	 */
+	tcs_list_gen(&commit_list, cmds, commit_idx);
+
+	if (!commit_idx[0])
+		return ret;
+
+	ret = rpmh_invalidate(qp->dev);
+	if (ret) {
+		pr_err("Error invalidating RPMH client (%d)\n", ret);
+		return ret;
+	}
+
+	ret = rpmh_write_batch(qp->dev, RPMH_ACTIVE_ONLY_STATE,
+			       cmds, commit_idx);
+	if (ret) {
+		pr_err("Error sending AMC RPMH requests (%d)\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int cmp_vcd(const void *_l, const void *_r)
+{
+	const struct qcom_icc_bcm **l = (const struct qcom_icc_bcm **)_l;
+	const struct qcom_icc_bcm **r = (const struct qcom_icc_bcm **)_r;
+
+	if (l[0]->aux_data.vcd < r[0]->aux_data.vcd)
+		return -1;
+	else if (l[0]->aux_data.vcd == r[0]->aux_data.vcd)
+		return 0;
+	else
+		return 1;
+}
+
+static int qnoc_probe(struct platform_device *pdev)
+{
+	const struct qcom_icc_desc *desc;
+	struct icc_onecell_data *data;
+	struct icc_provider *provider;
+	struct qcom_icc_node **qnodes;
+	struct qcom_icc_provider *qp;
+	struct icc_node *node;
+	size_t num_nodes, i;
+	int ret;
+
+	desc = of_device_get_match_data(&pdev->dev);
+	if (!desc)
+		return -EINVAL;
+
+	qnodes = desc->nodes;
+	num_nodes = desc->num_nodes;
+
+	qp = devm_kzalloc(&pdev->dev, sizeof(*qp), GFP_KERNEL);
+	if (!qp)
+		return -ENOMEM;
+
+	data = devm_kcalloc(&pdev->dev, num_nodes, sizeof(*node), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	provider = &qp->provider;
+	provider->dev = &pdev->dev;
+	provider->set = qcom_icc_set;
+	provider->aggregate = qcom_icc_aggregate;
+	provider->xlate = of_icc_xlate_onecell;
+	INIT_LIST_HEAD(&provider->nodes);
+	provider->data = data;
+
+	qp->dev = &pdev->dev;
+	qp->bcms = desc->bcms;
+	qp->num_bcms = desc->num_bcms;
+
+	ret = icc_provider_add(provider);
+	if (ret) {
+		dev_err(&pdev->dev, "error adding interconnect provider\n");
+		return ret;
+	}
+
+	for (i = 0; i < num_nodes; i++) {
+		size_t j;
+
+		node = icc_node_create(qnodes[i]->id);
+		if (IS_ERR(node)) {
+			ret = PTR_ERR(node);
+			goto err;
+		}
+
+		node->name = qnodes[i]->name;
+		node->data = qnodes[i];
+		icc_node_add(node, provider);
+
+		dev_dbg(&pdev->dev, "registered node %p %s %d\n", node,
+			qnodes[i]->name, node->id);
+
+		/* populate links */
+		for (j = 0; j < qnodes[i]->num_links; j++)
+			icc_link_create(node, qnodes[i]->links[j]);
+
+		data->nodes[i] = node;
+	}
+	data->num_nodes = num_nodes;
+
+	for (i = 0; i < qp->num_bcms; i++)
+		qcom_icc_bcm_init(qp->bcms[i], &pdev->dev);
+
+	/*
+	 * Pre sort the BCMs based on VCD for ease of generating a command list
+	 * that groups the BCMs with the same VCD together. VCDs are numbered
+	 * with lowest being the most expensive time wise, ensuring that
+	 * those commands are being sent the earliest in the queue.
+	 */
+	sort(qp->bcms, qp->num_bcms, sizeof(*qp->bcms), cmp_vcd, NULL);
+
+	platform_set_drvdata(pdev, qp);
+
+	dev_dbg(&pdev->dev, "Registered SDM845 ICC\n");
+
+	return ret;
+err:
+	list_for_each_entry(node, &provider->nodes, node_list) {
+		icc_node_del(node);
+		icc_node_destroy(node->id);
+	}
+
+	icc_provider_del(provider);
+	return ret;
+}
+
+static int qnoc_remove(struct platform_device *pdev)
+{
+	struct qcom_icc_provider *qp = platform_get_drvdata(pdev);
+	struct icc_provider *provider = &qp->provider;
+	struct icc_node *n;
+
+	list_for_each_entry(n, &provider->nodes, node_list) {
+		icc_node_del(n);
+		icc_node_destroy(n->id);
+	}
+
+	return icc_provider_del(provider);
+}
+
+static const struct of_device_id qnoc_of_match[] = {
+	{ .compatible = "qcom,sdm845-rsc-hlos", .data = &sdm845_rsc_hlos },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, qnoc_of_match);
+
+static struct platform_driver qnoc_driver = {
+	.probe = qnoc_probe,
+	.remove = qnoc_remove,
+	.driver = {
+		.name = "qnoc-sdm845",
+		.of_match_table = qnoc_of_match,
+	},
+};
+module_platform_driver(qnoc_driver);
+
+MODULE_AUTHOR("David Dai <daidavid1@codeaurora.org>");
+MODULE_DESCRIPTION("Qualcomm sdm845 NoC driver");
+MODULE_LICENSE("GPL v2");

drivers/macintosh/via-cuda.c

@@ -569,6 +569,7 @@ cuda_interrupt(int irq, void *arg)
     unsigned char ibuf[16];
     int ibuf_len = 0;
     int complete = 0;
+    bool full;
     
     spin_lock_irqsave(&cuda_lock, flags);
 
@@ -656,12 +657,13 @@ idle_state:
 	break;
 
     case reading:
-	if (reading_reply ? ARRAY_FULL(current_req->reply, reply_ptr)
+	full = reading_reply ? ARRAY_FULL(current_req->reply, reply_ptr)
-	                  : ARRAY_FULL(cuda_rbuf, reply_ptr))
+	                     : ARRAY_FULL(cuda_rbuf, reply_ptr);
+	if (full)
 	    (void)in_8(&via[SR]);
 	else
 	    *reply_ptr++ = in_8(&via[SR]);
-	if (!TREQ_asserted(status)) {
+	if (!TREQ_asserted(status) || full) {
 	    if (mcu_is_egret)
 		assert_TACK();
 	    /* that's all folks */

drivers/misc/Kconfig

@@ -295,6 +295,17 @@ config QCOM_COINCELL
 	  to maintain PMIC register and RTC state in the absence of
 	  external power.
 
+config QCOM_FASTRPC
+	tristate "Qualcomm FastRPC"
+	depends on ARCH_QCOM || COMPILE_TEST
+	depends on RPMSG
+	select DMA_SHARED_BUFFER
+	help
+	  Provides a communication mechanism that allows for clients to
+	  make remote method invocations across processor boundary to
+	  applications DSP processor. Say M if you want to enable this
+	  module.
+
 config SGI_GRU
 	tristate "SGI GRU driver"
 	depends on X86_UV && SMP
@@ -535,4 +546,5 @@ source "drivers/misc/echo/Kconfig"
 source "drivers/misc/cxl/Kconfig"
 source "drivers/misc/ocxl/Kconfig"
 source "drivers/misc/cardreader/Kconfig"
+source "drivers/misc/habanalabs/Kconfig"
 endmenu

drivers/misc/Makefile

@@ -18,6 +18,7 @@ obj-$(CONFIG_TIFM_CORE)       	+= tifm_core.o
 obj-$(CONFIG_TIFM_7XX1)       	+= tifm_7xx1.o
 obj-$(CONFIG_PHANTOM)		+= phantom.o
 obj-$(CONFIG_QCOM_COINCELL)	+= qcom-coincell.o
+obj-$(CONFIG_QCOM_FASTRPC)	+= fastrpc.o
 obj-$(CONFIG_SENSORS_BH1770)	+= bh1770glc.o
 obj-$(CONFIG_SENSORS_APDS990X)	+= apds990x.o
 obj-$(CONFIG_SGI_IOC4)		+= ioc4.o
@@ -59,3 +60,4 @@ obj-$(CONFIG_PCI_ENDPOINT_TEST)	+= pci_endpoint_test.o
 obj-$(CONFIG_OCXL)		+= ocxl/
 obj-y				+= cardreader/
 obj-$(CONFIG_PVPANIC)   	+= pvpanic.o
+obj-$(CONFIG_HABANA_AI)		+= habanalabs/

drivers/misc/ad525x_dpot.c

@@ -202,22 +202,20 @@ static s32 dpot_read_i2c(struct dpot_data *dpot, u8 reg)
 		return dpot_read_r8d8(dpot, ctrl);
 	case DPOT_UID(AD5272_ID):
 	case DPOT_UID(AD5274_ID):
-			dpot_write_r8d8(dpot,
+		dpot_write_r8d8(dpot,
 				(DPOT_AD5270_1_2_4_READ_RDAC << 2), 0);
 
-			value = dpot_read_r8d16(dpot,
+		value = dpot_read_r8d16(dpot, DPOT_AD5270_1_2_4_RDAC << 2);
-				DPOT_AD5270_1_2_4_RDAC << 2);
+		if (value < 0)
+			return value;
+		/*
+		 * AD5272/AD5274 returns high byte first, however
+		 * underling smbus expects low byte first.
+		 */
+		value = swab16(value);
 
-			if (value < 0)
+		if (dpot->uid == DPOT_UID(AD5274_ID))
-				return value;
+			value = value >> 2;
-			/*
-			 * AD5272/AD5274 returns high byte first, however
-			 * underling smbus expects low byte first.
-			 */
-			value = swab16(value);
-
-			if (dpot->uid == DPOT_UID(AD5274_ID))
-				value = value >> 2;
 		return value;
 	default:
 		if ((reg & DPOT_REG_TOL) || (dpot->max_pos > 256))